Commit Graph

2383 Commits

Author SHA1 Message Date
Len Brown 418521deef Merge branch 'bugzilla-14954' into release 2010-01-20 01:26:22 -05:00
Len Brown be6066f34c Merge branch 'misc' into release 2010-01-20 01:23:27 -05:00
Len Brown b4cdd6ac4f Merge branch 'osc-bugfix' into release 2010-01-20 01:23:18 -05:00
Len Brown b07f07e0c2 Merge branch 'ec' into release 2010-01-20 01:20:36 -05:00
Len Brown 361243fd62 Merge branch 'bugzilla-15064' into release 2010-01-20 01:15:21 -05:00
Len Brown 49897deeea Merge branch 'bugzilla-14858' into release 2010-01-20 01:14:57 -05:00
Len Brown 093e2961fe Merge branch 'bugzilla-13577-video' into release 2010-01-20 01:14:41 -05:00
Len Brown 9c6a6b3cbc Merge branch 'acpi-pad' into release 2010-01-20 01:14:30 -05:00
Len Brown d22edd293f ACPI: delete acpi_processor_power_verify_c2()
no functional change -- cleanup only.

acpi_processor_power_verify_c2() was nearly empty due to a previous patch,
so expand its remains into its one caller and delete it.

Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-20 00:54:15 -05:00
Len Brown a6d72c189f ACPI: allow C3 > 1000usec
Do for C3 what the previous patch did for C2.

The C2 patch was in response to a highly visible
and multiply reported C-state/turbo failure,
while this change has no bug report in-hand.

This will enable C3 in Linux on systems where BIOS
overstates C3 latency in _CST.  It will also enable
future systems which may actually have C3 > 1000usec.

Linux has always ignored ACPI BIOS C3 with exit latency > 1000 usec,
and the ACPI spec is clear that is correct FADT-supplied C3.

However, the ACPI spec explicitly states that _CST-supplied C-states
have no latency limits.

So move the 1000usec C3 test out of the code shared
by FADT and _CST code-paths, and into the FADT-specific path.

Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-20 00:54:15 -05:00
Len Brown 5d76b6f6c1 ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C
Linux has always ignored ACPI BIOS C2 with exit latency > 100 usec,
and the ACPI spec is clear that is correct FADT-supplied C2.

However, the ACPI spec explicitly states that _CST-supplied C-states
have no latency limits.

So move the 100usec C2 test out of the code shared
by FADT and _CST code-paths, and into the FADT-specific path.

This bug has not been visible until Nehalem, which advertises
a CPU-C2 worst case exit latency on servers of 205usec.
That (incorrect) figure is being used by BIOS writers
on mobile Nehalem systems for the AC configuration.
Thus, Linux ignores C2 leaving just C1, which is
saves less power, and also impacts performance
by preventing the use of turbo mode.

http://bugzilla.kernel.org/show_bug.cgi?id=15064

Tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-20 00:54:01 -05:00
Darren Jenkins 7f07a605a3 ACPI: power_meter: remove double kfree()
resource->domain_devices can be double kfree()'d in a couple of places.
Fix this by setting num_domain_devices = 0 after the kfree().

Coverity CID: 13356, 13355, 13354

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-19 23:56:02 -05:00
Alex Chiang 2205cbe8ec ACPI: processor: restrict early _PDC to opt-in platforms
Commit 78f1699 (ACPI: processor: call _PDC early) blindly walks
the namespace and calls _PDC on every processor object it finds.

This change may cause issues on platforms that declare dummy
values for SSDTs on non-present processors (disabled in MADT).
When we call _PDC and dynamically attempt to execute the AML
Load() op on these dummy SSDTs, there's no telling what might
happen.

Rather than finding every platform that has bogus SSDTs, restrict
early _PDC calls to platforms that are known to need early
evaluation of _PDC.

This is a minimal, temporary fix (given the context of the
current release cycle). A real solution of checking the MADT for
non-present processors will be written for the next merge window.

References:

	http://bugzilla.kernel.org/show_bug.cgi?id=14710
	http://bugzilla.kernel.org/show_bug.cgi?id=14954

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-19 23:43:47 -05:00
Rakib Mullick c19bdb6126 ACPI: Fix unused variable warning in sbs.c
When CONFIG_ACPI_SYSFS_POWER=n and CONFIG_ACPI_PROCFS_POWER=n, then
we're warned by the following warning:

drivers/acpi/sbs.c: In function `acpi_battery_remove':
drivers/acpi/sbs.c:825: warning: unused variable `battery'

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 16:04:18 -05:00
Márton Németh c97adf9e7b acpi: make ACPI device id constant
The ids field of the struct acpi_driver is constant in <linux/acpi/acpi_bus.h>
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 15:56:43 -05:00
Luck, Tony 7a0b73a49a ACPI: Fix section mismatch error for acpi_early_processor_set_pdc()
Alex Chiang introduced acpi_early_processor_set_pdc() in commit:
 ACPI: processor: call _PDC early
 78f1699659

But this results in a section mismatch:

WARNING: drivers/acpi/acpi.o(.text+0xa9c1): Section mismatch in reference from the
function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table
The function acpi_early_processor_set_pdc() references
the variable __cpuinitdata processor_idle_dmi_table.
This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata
annotation or the annotation of processor_idle_dmi_table is wrong.

The only caller of acpi_early_processor_set_pdc() is acpi_bus_init() which
is an "__init" function. So the correct fix here is to mark
acpi_early_processor_set_pdc() "__init" too.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 02:00:44 -05:00
H Hartley Sweeten 070a24f4d2 ACPI: Remove unnecessary cast.
The struct seq_file 'private' member is a void *, the cast is not needed.
Also, remove an extra whitespace line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 23:06:44 -05:00
Zhao Yakui 6a4e2b7503 ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes
If the BIOS pokes the system-wide OSC bits to see if Linux
supports evaluating _OST after a _PPC change notification,
answer yes.

Also, fix an oversight where we neglected to set the OSC
bit advertising processor aggregator device support
when acpi-pad is compiled as a module.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 23:05:00 -05:00
Alexey Starikovskiy 54070101f8 ACPI: EC: Add wait for irq storm
Merge of poll and irq modes accelerated EC transaction, so
that keyboard starts to suffer again. Add msleep(1) into
transaction path for the storm to allow keyboard controller
to do its job.

Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14747

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 22:53:04 -05:00
Alexey Starikovskiy f5347867c5 ACPI: SBS: Move SBS HC callback to faster Notify queue
SBS transactions should happen in Notify work queue, to not create
a dead lock with GPE execution accessing SBS devices.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 22:52:48 -05:00
Zhang Rui c504f8cb68 ACPI video: Prune dupe video devices, unless "video.allow_duplicates"
Some buggy BIOS exports multiple ACPI video bus devices for the same
VGA controller, and multiple backlight control methods as well.
This messes up the ACPI video backlight control.

http://bugzilla.kernel.org/show_bug.cgi?id=13577

With this patch applied, only the FIRST ACPI video bus device
under a PCI device node is bind to ACPI video driver by default.

If the first ACPI video bus device doesn't work well, we can use
video.allow_duplicates=1 to go back to the old behavior.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30 20:30:04 -05:00
Chen Gong 3b8cb427e9 acpi_pad: fix error checks
There are some fixes listed below:
1. When met a bogus BIOS, the return value of cpu number maybe is
   a negative value so that acpi_pad_pur get an unexpected result.
2. the return value of function acpi_pad_idle_cpus is useless.
3. enhance the process of create_power_saving_task/destroy_power_saving_task
4. Add more error checks when evaluating _PUR object.
5. one typo fix

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30 19:24:36 -05:00
Len Brown 1201b2a9be Merge branch 'resume-sci-force-bootparam' into release 2009-12-30 18:32:32 -05:00
Zhang Rui d7f0eea9e4 ACPI: introduce kernel parameter acpi_sleep=sci_force_enable
Introduce kernel parameter acpi_sleep=sci_force_enable

some laptop requires SCI_EN being set directly on resume,
or else they hung somewhere in the resume code path.

We already have a blacklist for these laptops but we still need
this option, especially when debugging some suspend/resume problems,
in case there are systems that need this workaround and are not yet
in the blacklist.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30 18:32:01 -05:00
Len Brown cccc67a4cf Merge branch 'video-error-case' into release 2009-12-30 02:51:38 -05:00
Zhang Rui e01ce79b7f ACPI video: correct error-handling code
backlight_device_register may return an ERR_PTR
value rather than a valid pointer.

Problem found by Julia Lawall, properly fixed by Zhang Rui.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30 01:51:07 -05:00
Zhang Rui 28c32e99bd ACPI video: no warning message if "acpi_backlight=vendor" is used
AML code always sends notifications to ACPI video device,
even if we disable the ACPI backlight control by using
boot option "acpi_backlight=vendor".

In this case we should not print any warning message.
http://bugzilla.kernel.org/show_bug.cgi?id=13671#c14

Sigend-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30 01:46:12 -05:00
Alexey Starikovskiy a62e8f1978 ACPI: EC: Accelerate query execution
Split EC query handling into acknowledge and execution phase.
This allows much smaller pending query lattency and lowers chances
of EC going "wild" and losing events.

Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14858

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24 14:52:38 -05:00
Len Brown da3df858c8 Merge branch 'pdc' into release 2009-12-24 01:17:21 -05:00
Len Brown 309ddc53be Merge branches 'bugzilla-14446', 'bugzilla-14753' and 'bugzilla-14824' into release 2009-12-24 01:17:01 -05:00
Len Brown 6f5464ce15 Merge branch 'osc' into release 2009-12-24 01:16:35 -05:00
Shaohua Li 9dc130fccb ACPI: fix OSC regression that caused aer and pciehp not to load
Executing _OSC returns a buffer, which has an acpi object in it.
Don't directly returns the buffer, instead, we return the acpi object's
buffer. This fixes a regression since caller of acpi_run_osc expects
an acpi object's buffer returned.

Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-23 17:42:07 -05:00
Alex Chiang 43bab25ced ACPI: processor: change acpi_processor_set_pdc() interface
When calling _PDC, we really only need the handle to the processor
to call the method; we don't look at any other parts of the
struct acpi_processor * given to us.

In the early path, when we walk the namespace, we are given the
handle directly, so just pass it through to acpi_processor_set_pdc()
without stuffing it into a wasteful struct acpi_processor allocated
on the stack each time

This saves 2834 bytes of stack.

Update the interface accordingly.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:33:58 -05:00
Alex Chiang b9c2db7834 ACPI: processor: open code acpi_processor_cleanup_pdc
We have the acpi_object_list * right there in acpi_processor_set_pdc()
so it doesn't seem necessary for an entire helper function just to
free it.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:16 -05:00
Alex Chiang fa118564ed ACPI: processor: change acpi_processor_eval_pdc interface
acpi_processor_eval_pdc() really only needs a handle and an
acpi_object_list * to do its work.

No need to pass in a struct acpi_processor *, so let's be more specific
about what we want.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:15 -05:00
Alex Chiang 3b407aef57 ACPI: processor: introduce acpi_processor_alloc_pdc()
acpi_processor_init_pdc() isn't really doing anything interesting
with the struct acpi_processor * parameter. Its real job is to allocate
the buffer for the _PDC bits.

So rename the function to acpi_processor_alloc_pdc(), and just return
the struct acpi_object_list * it's supposed to allocate.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:14 -05:00
Alex Chiang 47817254b8 ACPI: processor: unify arch_acpi_processor_cleanup_pdc
The x86 and ia64 implementations of the function in $subject are
exactly the same.

Also, since the arch-specific implementations of setting _PDC have
been completely hollowed out, remove the empty shells.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:14 -05:00
Alex Chiang 6c5807d7bc ACPI: processor: finish unifying arch_acpi_processor_init_pdc()
The only thing arch-specific about calling _PDC is what bits get
set in the input obj_list buffer.

There's no need for several levels of indirection to twiddle those
bits. Additionally, since we're just messing around with a buffer,
we can simplify the interface; no need to pass around the entire
struct acpi_processor * just to get at the buffer.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:13 -05:00
Alex Chiang 08ea48a326 ACPI: processor: factor out common _PDC settings
Both x86 and ia64 initialize _PDC with mostly common bit settings.

Factor out the common settings and leave the arch-specific ones alone.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:12 -05:00
Alex Chiang 407cd87c54 ACPI: processor: unify arch_acpi_processor_init_pdc
The x86 and ia64 implementations of arch_acpi_processor_init_pdc()
are almost exactly the same. The only difference is in what bits
they set in obj_list buffer.

Combine the boilerplate memory management code, and leave the
arch-specific bit twiddling in separate implementations.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:11 -05:00
Alex Chiang 1d9cb470a7 ACPI: processor: introduce arch_has_acpi_pdc
arch dependent helper function that tells us if we should attempt to
evaluate _PDC on this machine or not.

The x86 implementation assumes that the CPUs in the machine must be
homogeneous, and that you cannot mix CPUs of different vendors.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:10 -05:00
Alex Chiang 78f1699659 ACPI: processor: call _PDC early
We discovered that at least one machine (HP Envy), methods in the DSDT
attempt to call external methods defined in a dynamically loaded SSDT.

Unfortunately, the DSDT methods we are trying to call are part of the
EC initialization, which happens very early, and the the dynamic SSDT
is only loaded when a processor _PDC method runs much later.

This results in namespace lookup errors for the (as of yet) undefined
methods.

Since Windows doesn't have any issues with this machine, we take it
as a hint that they must be evaluating _PDC much earlier than we are.

Thus, the proper thing for Linux to do should be to match the Windows
implementation more closely.

Provide a mechanism to call _PDC before we enable the EC. Doing so loads
the dynamic tables, and allows the EC to be enabled correctly.

The ACPI processor driver will still evaluate _PDC in its .add() method
to cover the hotplug case.

Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=14824

Cc: ming.m.lin@intel.com
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:08 -05:00
Alexey Starikovskiy 55b313f249 ACPI: EC: Fix MSI DMI detection
MSI strings should be ORed, not ANDed.

Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14446

cc: stable@kernel.org
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 02:45:30 -05:00
Zhang Rui 81074e90f5 ACPI: disable _OSI(Windows 2009) on Asus K50IJ
Fix a win7 compability issue on Asus K50IJ.

Here is the _BCM method of this laptop:
                    Method (_BCM, 1, NotSerialized)
                    {
                        If (LGreaterEqual (OSFG, OSVT))
                        {
                            If (LNotEqual (OSFG, OSW7))
                            {
                                Store (One, BCMD)
                                Store (GCBL (Arg0), Local0)
                                Subtract (0x0F, Local0, LBTN)
                                ^^^SBRG.EC0.STBR ()
                                ...
                            }
                            Else
                            {
                                DBGR (0x0B, Zero, Zero, Arg0)
                                Store (Arg0, LBTN)
                                ^^^SBRG.EC0.STBR ()
                                ...
                            }
                        }
                    }
LBTN is used to store the index of the brightness level in the _BCL.
GCBL is a method that convert the percentage value to the index value.
If _OSI(Windows 2009) is not disabled, LBTN is stored a percentage
value which is surely beyond the end of _BCL package.

http://bugzilla.kernel.org/show_bug.cgi?id=14753

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 02:39:24 -05:00
Len Brown aa96ce0af8 Merge branch 'misc-2.6.33' into release 2009-12-16 14:22:32 -05:00
Thomas Renninger bf8b4542f9 ACPI processor: Fix section mismatch for processor_add()
Due to the merge of processor_start() (declared with __cpuinit) into
processor_add(), a section mismatch warning appears:

WARNING: drivers/built-in.o(.text+0x4d59d): Section mismatch in reference
from the function acpi_processor_add() to the function
.cpuinit.text:acpi_processor_power_init()
...

This patch fixes the warning by declaring processor_add() as __cpuinit
and also declares acpi_processor_add_fs() as __cpuinit as it is only
used in acpi_processor_add().

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16 14:21:51 -05:00
Len Brown 2900681b25 Merge branch 'osc' into release 2009-12-16 14:07:29 -05:00
Shaohua Li 3563ff964f ACPI: Add platform-wide _OSC support.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16 14:05:34 -05:00
Shaohua Li 3a9622dc46 ACPI: cleanup pci_root _OSC code.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16 14:05:11 -05:00
Shaohua Li 70023de88c ACPI: Add a generic API for _OSC -v2
v2->v1:
.improve debug info as suggedted by Bjorn,Kenji
.API is using uuid string as suggested by Alexey

Add an API to execute _OSC. A lot of devices can have this method, so add a
generic API.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16 14:03:30 -05:00