Commit Graph

406 Commits

Author SHA1 Message Date
Stefan Richter be7963b7e7 ieee1394: ohci1394: fix initialization if built non-modular
Initialization of ohci1394 was broken according to one reporter if the
driver was statically linked, i.e. not built as loadable module.  Dmesg:

  PCI: Device 0000:02:07.0 not available because of resource collisions
  ohci1394: Failed to enable OHCI hardware.

This was reported for a Toshiba Satellite 5100-503.  The cause is commit
8df4083c52 in Linux 2.6.19-rc1 which only
served purposes of early remote debugging via FireWire.  This
functionality is better provided by the currently out-of-tree driver
ohci1394_earlyinit.  Reversal of the commit was OK'd by Andi Kleen.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-09-20 21:19:45 +02:00
Stefan Richter a2ee3f9bbb ieee1394: sbp2: fix sbp2_remove_device for error cases
Bug found by Olaf Hering <olh@suse.de>:
sbp2util_remove_command_orb_pool requires a valid lu->hi pointer.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25 18:00:26 +02:00
Stefan Richter e4f8cac5e0 ieee1394: sbp2: more correct Kconfig dependencies
Make the option SBP2_PHYS_DMA available on all architectures where it
compiles.  This includes x86-64 where I runtime-tested it successfully.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02 20:34:16 +02:00
Stefan Richter a9c2f18800 ieee1394: revert "sbp2: enforce 32bit DMA mapping"
Revert commit 0555659d63 from 2.6.22-rc1.
The dma_set_mask call somehow failed on a PowerMac G5, PPC64:
http://lkml.org/lkml/2007/8/1/344

Should there ever occur a DMA mapping beyond the physical DMA range, a
proper SBP-2 firmware will report transport errors.  So let's leave it
at that.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Olaf Hering <olh@suse.de>
2007-08-02 20:34:16 +02:00
Al Viro 5b26e64ea3 raw1394 __user annotation
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Rafael J. Wysocki 8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Linus Torvalds bc06cffdec Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
  [SCSI] ibmvscsi: convert to use the data buffer accessors
  [SCSI] dc395x: convert to use the data buffer accessors
  [SCSI] ncr53c8xx: convert to use the data buffer accessors
  [SCSI] sym53c8xx: convert to use the data buffer accessors
  [SCSI] ppa: coding police and printk levels
  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
  [SCSI] remove the dead CYBERSTORMIII_SCSI option
  [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
  [SCSI] Clean up scsi_add_lun a bit
  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
  [SCSI] sni_53c710: Cleanup
  [SCSI] qla4xxx: Fix underrun/overrun conditions
  [SCSI] megaraid_mbox: use mutex instead of semaphore
  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
  [SCSI] qla2xxx: update version to 8.02.00-k1.
  [SCSI] qla2xxx: add support for NPIV
  [SCSI] stex: use resid for xfer len information
  [SCSI] Add Brownie 1200U3P to blacklist
  [SCSI] scsi.c: convert to use the data buffer accessors
  ...
2007-07-15 16:51:54 -07:00
Al Viro 51ec138c64 ieee1394: forgotten dereference...
Going through the string and waiting for _pointer_ to become '\0'
is not what the authors meant...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Ben Collins <ben.collins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 16:40:51 -07:00
Stefan Richter 53c96b4174 ieee1394: remove old isochronous ABI
Based on patch "the scheduled removal of RAW1394_REQ_ISO_{SEND,LISTEN}"
from Adrian Bunk, November 20 2006.

This patch also removes the underlying facilities in ohci1394 and
disables them in pcilynx.  That is, hpsb_host_driver.devctl() and
hpsb_host_driver.transmit_packet() are no longer used for iso reception
and transmission.

Since video1394 and dv1394 only work with ohci1394 and raw1394's rawiso
interface has never been implemented in pcilynx, pcilynx is now no
longer useful for isochronous applications.

raw1394 will still handle the request types but will complete the
requests with errors that indicate API version conflicts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:41 +02:00
Stefan Richter 77bba7aea7 ieee1394: sbp2: change some module parameters from int to bool
This is upwards compatible, except that integer values other than 0 or 1
are no longer accepted.  But values like "Y", "N", "no", "nnoooh!" work
now.

Also, improve a comment on the serialize_io parameter and make the
ORB_SET_EXCLUSIVE macro ultra-safe.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:41 +02:00
Stefan Richter 93f2e0259a ieee1394: first minimal NUMA awareness
Association of a host device with a node on NUMA machines optimizes
allocations of skbs given from the networking stack to eth1394.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:40 +02:00
Stefan Richter 8e4dc400b7 ieee1394: eth1394: revert parent device to that in 2.6.20
After ieee1394 was converted away from class_device like the networking
subsystem was already in 2.6.21, eth1394's device may point to the
fw-host device as its parent again like in 2.6.20.

This affects userspace tools which examine the sysfs representation of
eth1394's device.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:40 +02:00
Stefan Richter a0e857eeff ieee1394: nodemgr: parallelize between several hosts
Remove the global nodemgr_serialize mutex which enclosed most of the
host thread event loop.  This allows for parallelism between several
host adapter cards.

Properly serialize the driver hooks .update(), .suspend(), .resume(),
and .remove() by means of device->sem.  These hooks can be called from
outside the host threads' contexts.

Get() and put() the device.driver when calling its hooks.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:39 +02:00
Kay Sievers dd7f2928d8 ieee1394: convert ieee1394 from "struct class_device" to "struct device"
Here is a straightforward conversion to "struct device". The "struct
class_device" will be removed from the kernel.

It seems to work fine for me with and without CONFIG_SYSFS_DEPRECATED
set.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:39 +02:00
Stefan Richter 59337087cb ieee1394: raw1394: fix a 32/64-bits compat fix
I was told that only i386 aligns 64 bit integers at 4 bytes boundaries
while all other architectures (32 bit architectures with 64 bit
siblings) align it on 8 bytes boundaries.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:39 +02:00
Stefan Richter 19f00e66f8 ieee1394: raw1394: Add ioctl() for 32bit userland on 64bit kernel, amendment
Pointed out by Arnd Bergmann:  PPC32 aligns this at 64bit, IA32 packs
it.  A kernel-wide available __compat_u64 which is 4-byte aligned on
AMD64 and IA64 would be nicer though.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:38 +02:00
Petr Vandrovec 650c12c528 ieee1394: raw1394: Add ioctl() for 32bit userland on 64bit kernel
Add compat_ioctl.  Although all structures are more or less same,
raw1394_iso_packets got pointer inside, and raw1394_cycle_timer got unwanted
padding in the middle.  I did not add any translation for ioctls passing array
of integers around as integers seem to have same size (32 bits) on all
architectures supported by Linux.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Acked-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)
2007-07-10 00:07:38 +02:00
Petr Vandrovec 883b97eaf2 ieee1394: raw1394: Fix write() for 32bit userland on 64bit kernel
* write(fd, buf, 52) from 32bit app was returning 56.  Most of callers did not
  care, but some (arm registration) did, and anyway it looks bad if request for
  writing 52 bytes returns 56.  And returning sizeof anything in 'int' is not
  good as well.  So all functions now return '0' instead of
  sizeof(struct raw1394_request) on success, and write() itself provides correct
  return value (it just returns value it was asked to write on success as raw1394
  does not do any partial writes at all).

* Related to this was problem that write() could have returned 0 when kernel
  state would become corrupted and moved to different state than
  opened/initialized/connected.  Now it returns -EBADFD which seemed appropriate.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Acked-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)
2007-07-10 00:07:37 +02:00
Petr Vandrovec ee9be42596 ieee1394: raw1394: Fix read() for 32bit userland on 64bit kernel
read() always failed with -EFAULT.  This was happening due to
raw1394_compat_read copying data to wrong location - access_ok always
failed as 'r' is kernel address, not user.  Whole function just tried to
copy data from 'r' to 'r', which is not good.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Acked-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)
2007-07-10 00:07:37 +02:00
Stefan Richter 6552731a05 ieee1394: add comments in struct hpsb_packet
to clarify who is supposed to set what

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:36 +02:00
Stefan Richter 17a624869e ieee1394: ohci1394: remove dead CONFIG variable
spotted by Robert P. J. Day <rpjday@mindspring.com>

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:36 +02:00
Carlos E. Ugarte 18b461796b ieee1394: fix to ether1394_tx in ether1394.c
This patch fixes a problem that occurs when packets cannot be sent across
the ieee1394 bus and we return NETDEV_TX_BUSY in the net driver "hard start
xmit" routine ether1394_tx. When we return NETDEV_TX_BUSY the stack will
call ether1394_tx again with the same skb. So we need to restore the header
to look like it did before we munged it for xmit over ieee1394.

[Stefan Richter: changed whitespace, deleted a local variable]

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-06-16 12:43:20 +02:00
Stefan Richter d7794c8668 ieee1394: sbp2: offer SAM-conforming target port ID in sysfs
With "modprobe sbp2 long_ieee1394_id=y", the format of
/sys/bus/scsi/devices/*:*:*:*/ieee1394_id is changed from e.g.
0001041010004beb:0:0 to 0001041010004beb:00042c:0000.

The longer format fully conforms to object identifier sizes as per
SAM(-2...4) and reflects what the SAM target port identifier is meant to
contain:  A Discovery ID allegedly specified by ISO/IEC 13213:1994 ---
however there is no such thing; the authors of SAM probably meant
Directory ID).  Especially target nodes with multiple dynamically added
targets may use Directory IDs to persistently identify target ports.

The new format is independent of implementation details of nodemgr.
Thus the same ieee1394_id attribute format can be implemented in the new
firewire stack.

The ieee1394_id is typically used to create persistently named links in
/dev/disk/by-id.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-31 21:40:13 +02:00
Stefan Richter a52938f3e2 ieee1394: fix calculation of sysfs attribute "address"
struct csr1212_keyval.offset is relative to 0xffff f000 0000 rather than
0xffff f000 0400.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-31 21:40:13 +02:00
James Bottomley 5bc65793cb [SCSI] Merge up to linux-2.6 head
Conflicts:

	drivers/scsi/jazz_esp.c

Same changes made by both SCSI and SPARC trees: problem with UTF-8
conversion in the copyright.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 23:57:05 -05:00
Petr Vandrovec 976da96a5d ieee1394: raw1394: Fix async send
While playing with libiec61883 I've noticed that async_send is broken
because it was doing copy_from_user(...., packet->data_size) before
packet->data_size was set to any useful value.  It got broken when
packet->allocated_data_size got introduced, as hpsb_alloc_packet does
not set packet->data_size anymore.  (Regression in 2.6.22-rc1)

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:21:00 +02:00
Stefan Richter ef50a6c59d ieee1394: eth1394: bring back a parent device
This adds a real parent device to eth1394's ethX device like in Linux
2.6.20 and older.  However, due to unfinished conversion of the ieee1394
away from class_device, we now refer to the FireWire controller's PCI
device as the parent, not to the ieee1394 driver's fw-host device.

Having a real parent device instead of a virtual one allows udev scripts
to distinguish eth1394 interfaces from networking bridges, bondings and
the likes.

Fixes a regression since 2.6.21:
https://bugs.gentoo.org/show_bug.cgi?id=177199

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:20:59 +02:00
Stefan Richter 7a97bc03e0 ieee1394: eth1394: handle tlabel exhaustion
When eth1394 was unable to acquire a transaction label, it just dropped
outgoing packets without attempt to resend them later.

The transmit queue is now halted if no tlabel is available to
->hard_start_xmit().  A workqueue job is then scheduled to catch the
moment when ieee1394 recycled the next lot of tlabels.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8402

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:20:59 +02:00
Stefan Richter 69c29fa7d1 ieee1394: eth1394: remove bogus netif_wake_queue
When we are within hard_start_xmit, the queue is already awake.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:20:58 +02:00
Stefan Richter 20e2008e1f ieee1394: sbp2: include workqueue.h
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:20:58 +02:00
FUJITA Tomonori d7dea2cf80 [SCSI] sbp2: convert to use the data buffer accessors
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-27 13:10:08 -05:00
Linus Torvalds 9b6a51746f Merge branch 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (138 commits)
  firewire: Convert OHCI driver to use standard goto unwinding for error handling.
  firewire: Always use parens with sizeof.
  firewire: Drop single buffer request support.
  firewire: Add a comment to describe why we split the sg list.
  firewire: Return SCSI_MLQUEUE_HOST_BUSY for out of memory cases in queuecommand.
  firewire: Handle the last few DMA mapping error cases.
  firewire: Allocate scsi_host up front and allocate the sbp2_device as hostdata.
  firewire: Provide module aliase for backwards compatibility.
  firewire: Add to fw-core-y instead of assigning fw-core-objs in Makefile.
  firewire: Break out shared IEEE1394 constant to separate header file.
  firewire: Use linux/*.h instead of asm/*.h header files.
  firewire: Uppercase most macro names.
  firewire: Coding style cleanup: no spaces after function names.
  firewire: Convert card_rwsem to a regular mutex.
  firewire: Clean up comment style.
  firewire: Use lib/ implementation of CRC ITU-T.
  CRC ITU-T V.41
  firewire: Rename fw-device-cdev.c to fw-cdev.c and move header to include/linux.
  firewire: Future proof the iso ioctls by adding a handle for the iso context.
  firewire: Add read/write and size annotations to IOC numbers.
  ...

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 13:30:08 -07:00
Martin Schwidefsky eeca7a36a8 [S390] Kconfig: refine depends statements.
Refine some depends statements to limit their visibility to the
environments that are actually supported.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Michael Opdenacker 59c51591a0 Fix occurrences of "the the "
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:57:56 +02:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Jean Delvare 6473d160b4 PCI: Cleanup the includes of <linux/pci.h>
I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Stefan Richter bcfd09ee48 ieee1394: remove garbage from Kconfig
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:33 +02:00
Stefan Richter 3f94aa4d69 ieee1394: more help in Kconfig
- s/Device Drivers/Controllers/
  - clarify who needs pcilynx
  - don't recommend Y for raw1394; M is typically used

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:33 +02:00
Simon Arlott 749cf76620 ieee1394: ohci1394: Fix mistake in printk message.
Fix the "attempting to setting" message in ohci1394.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Bernhard Kauer 2ab7752469 ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl register
Remove the unneeded code that clears, sets and again clears the
rcvPhyPkt bit in the ohci1394 LinkControl register in ohci_initialize().

Signed-off-by: Bernhard Kauer <kauer@os.inf.tu-dresden.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter c13596b0e5 ieee1394: ohci1394: fix cosmetic problem in error logging
If posted write failed, an "Unhandled interrupt(s) 0x00000100" message
was logged by mistake.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter 21b2c5647b ieee1394: eth1394: send async streams at S100 on 1394b buses
eth1394 did not work on buses consisting of S100B...S400B hardware
because it attempted to send GASP packets at S800.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Akinobu Mita 809e905ce7 ieee1394: eth1394: fix error path in module_init
This patch fixes some error handlings in eth1394:

- check return value of kmem_cache_create()
- cleanup resources if hpsb_register_protocol() fails

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (whitespace)
2007-04-30 00:00:32 +02:00
Stefan Richter fdc0092bfd ieee1394: eth1394: correct return codes in hard_start_xmit
This patch actually doesn't change anything because there was always 0
== NETDEV_TX_OK returned before.

TODO: Return NETDEV_TX_BUSY in error case and test in different error
conditions.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter 53f374e76c ieee1394: eth1394: hard_start_xmit is called in atomic context
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter 099398719b ieee1394: eth1394: some conditions are unlikely
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter 2e2173df68 ieee1394: eth1394: clean up fragment_overlap
offset > fi->offset + fi->len - 1  ==  !(offset < fi->offset + fi->len)
offset + len - 1 < fi->offset      ==  !(offset + len > fi->offset)
!(A || B)  ==  (!A && !B)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:31 +02:00
Stefan Richter 01590d20b4 ieee1394: eth1394: don't use alloc_etherdev
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:31 +02:00
Stefan Richter 8a62bf7978 ieee1394: eth1394: omit useless set_mac_address callback
We can't reconfigure the MAC address, hence we don't need the callback.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:31 +02:00