Commit Graph

5623 Commits

Author SHA1 Message Date
Leonard Crestez f89b9e1be7 clk: imx: Fix PLL_1416X not rounding rates
Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".

This breaks dynamic rate rounding for features such as cpufreq.

Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dcc7 ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 14:21:43 -07:00
Weiyi Lu b3cf181c65 clk: mediatek: fix clk-gate flag setting
CLK_SET_RATE_PARENT would be dropped.
Merge two flag setting together to correct the error.

Fixes: 5a1cc4c27a ("clk: mediatek: Add flags to mtk_gate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 09:41:49 -07:00
David Müller 7c2e071300 clk: x86: Add system specific quirk to mark clocks as critical
Since commit 648e921888 ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are
unconditionally gated off. Unfortunately this will break systems where these
clocks are used for external purposes beyond the kernel's knowledge. Fix it
by implementing a system specific quirk to mark the necessary pmc_plt_clks as
critical.

Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: David Müller <dave.mueller@gmx.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-10 15:54:12 -07:00
Stephen Boyd 9f842abde8 Second round of fixes for meson clocks targeted for v5.1:
- clk-pll: fix rate rounding fixing meson8b boot failure
 - vid-pll-div: fix recal_rate warning and return when invalid setting
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcndsrAAoJEHfc29rIyEnRWosQAJVMKETo70Iq1ya6CTaBbVtl
 lF/NecxIBQJt7Pv1nfeA1G2WSHALNPD/91JFcrSMgWZEfY4cmdxCcqChCw4hgMIk
 2EYeNBrtI6IICTtdn3bEePTHuw9ORNzQm2JU02eg1aGz4fuxAIesoUXroulUrKGy
 VYOYrJHftKFctMXvf314IdfoCrQmXmBsRSY3aMKrGZmjGJpZ6PJCiTzxsquPyeOz
 VZzxtaCyPlEkNTm92y65ex7zhN/fQIQUULT6ecr1iy+hp0ByfCwcHzGi0lu36ie1
 QC1ZDfrqJH/+/F+ylejjeHsgq1rLrLhUCPbHeD+PTz7IjxEm6s2ksxDRu2qjqR46
 qdm+MkLcOPS/b+vLlDvE3/IbxHmyAp69N5QdLQlZHeFVQnjupOLpJYa8F/DswaT9
 ZAMbd8yo5EXZuBD6hlppfSOsj3KQWS8c2GszHDTzV83TM7ST0UF8CUvfSc+uXue9
 xU5ojlqNp0XR+roke/sSxrgA2I/xNeqVhwRltNXIQ+v40jHq2ss2Vuw+7Gu5+mp3
 BCOoHwX57wwLmBiV6BK3Wbl1uI3B2IE8nYH+fMbNnAeg+TRvjUGZQAiza6UkkSqx
 NSpn/iBBpS2u+RrxBWJglIoAv7iwI+JQbfk3HIWwdwlif5jMDGphdV5OieE6MCd1
 G2Uy5XdNgF1cvs565B9i
 =muUm
 -----END PGP SIGNATURE-----

Merge tag 'meson-clk-fixes-for-5.1-v2' of https://github.com/BayLibre/clk-meson into clk-fixes

Pull more fixes for meson clocks from Neil Armstrong:
 - clk-pll: fix rate rounding fixing meson8b boot failure
 - vid-pll-div: fix recal_rate warning and return when invalid setting

* tag 'meson-clk-fixes-for-5.1-v2' of https://github.com/BayLibre/clk-meson:
  clk: meson: vid-pll-div: remove warning and return 0 on invalid config
  clk: meson: pll: fix rounding and setting a rate that matches precisely
2019-03-29 15:42:34 -07:00
Neil Armstrong 6620f45ff8 clk: meson: vid-pll-div: remove warning and return 0 on invalid config
The vid_pll_div is a programmable fractional divider, but vendor gives a
limited of known configuration value and it's corresponding fraction.

Thus when at reset value (0) or unknown value, we cannot determine the
result rate.

The initial behaviour was to print a warning, but the warning triggers
at each boot and when the clock tree is refreshed.

This patch moves the print to debug and returns 0 instead of the
parent rate.

Fixes: 72dbb8c94d ("clk: meson: Add vid_pll divider driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190327151348.27402-1-narmstrong@baylibre.com
2019-03-29 09:41:30 +01:00
Martin Blumenstingl d6f987c846 clk: meson: pll: fix rounding and setting a rate that matches precisely
Make meson_clk_pll_is_better() consider a rate that precisely matches
the requested rate to be better than any previous rate (which was
smaller than the current).

Prior to commit 8eed1db1ad ("clk: meson: pll: update driver for the
g12a") meson_clk_get_pll_settings() returned early (before calling
meson_clk_pll_is_better()) if the rate from the current iteration
matches the requested rate precisely. After this commit
meson_clk_pll_is_better() is called unconditionally. This requires
meson_clk_pll_is_better() to work with the case where "now == rate".

This fixes a hang during boot on Meson8b / Odroid-C1 for me.

Fixes: 8eed1db1ad ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324164327.22590-2-martin.blumenstingl@googlemail.com
2019-03-25 13:18:09 +01:00
Stephen Boyd 22cf7c6f8e First round of fixes for meson clocks targeted for v5.1:
- g12a: Fix VPU clock parents and mux mask
 - gxbb: Add CLK_DIVIDER_ROUND_CLOSEST to video decoder clocks
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJckUofAAoJEHfc29rIyEnRR/AP/2a2Ps546323ryvFsJJrST1+
 Lodsrds1JSc79WoibkJiRbmU82mkcfTMdcmbwGFQrEB2KQKghWfjh0XRo+SzboSy
 YoaGRvcc7EFkyQD6ETI1f1viBh6t94iTalfS6LclBBGx98jWVzBITrNNAzTCziJR
 niEtMkRvWDFMGbxxiLCbO0i3/If+37aeI0Q25nm2v9KOuYN88fgawz8hEZY74wuX
 104S/+W8t9J2WUg0OCCeeXR9kHXoJ4mQGAUI9wfM/kfsQXcTVLsBgoQKC4JEKQL/
 397TkaAc7w6xr/5Z78CrN6xjFE6Dvs5SyYSDpetXf/jXSS67uHWVcSrjvixPvkFZ
 /y5zF6HnQYN0V6iau1CIstVYFVG6JQ3SFF2JpegJj8VnfYcycR138z2XDQLeBLVV
 gYYuCMUs3iwY5/gLya7lH7vmX+91mSz+vxT5+pTQfr+/WChW7PnepRmPmaTsMDaF
 eduoDg+hTdVDmizdnjdfHZKTBjJ6aMM4wjk+PcDv0xR8nv37bntMQaQ4kjAwoX0h
 o/mkhQJ0uqUoONMMzfAfkWVFVB/l4p7SP8HLg70HNKDNT3RRoJ3LcY1ZjYHPuB90
 8WBas69IoVlpPRlL842x3R2Km2r/Eejk7srQt+baV80zNSIPrdky6XapZQr+HLKm
 ZT1ENKS88Ryrsj0l9Jwh
 =9jak
 -----END PGP SIGNATURE-----

Merge tag 'meson-clk-fixes-for-5.1' of https://github.com/BayLibre/clk-meson into clk-fixes

Pull a round of fixes for meson clocks from Neil Armstrong:
 - g12a: Fix VPU clock parents and mux mask
 - gxbb: Add CLK_DIVIDER_ROUND_CLOSEST to video decoder clocks

* tag 'meson-clk-fixes-for-5.1' of https://github.com/BayLibre/clk-meson:
  clk: meson-g12a: fix VPU clock parents
  clk: meson: g12a: fix VPU clock muxes mask
  clk: meson-gxbb: round the vdec dividers to closest
2019-03-19 14:30:36 -07:00
Neil Armstrong 9e05e49c29 clk: meson-g12a: fix VPU clock parents
First two VPU clock parents are wrong, fix it here.

Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190313135503.3198-1-narmstrong@baylibre.com
2019-03-19 17:38:41 +01:00
Maxime Jourdan f53b9f146f clk: meson: g12a: fix VPU clock muxes mask
There are 8 parents, use 0x7

Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319082611.6215-1-mjourdan@baylibre.com
2019-03-19 17:38:00 +01:00
Maxime Jourdan 9b70c697e8 clk: meson-gxbb: round the vdec dividers to closest
We want the video decoder clocks to always round to closest. While the
muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding
CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers.

Fix this by adding the flag to the two vdec dividers.

Fixes: a565242eb9 ("clk: meson: gxbb: add the video decoder clocks")
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319102537.2043-1-mjourdan@baylibre.com
2019-03-19 17:36:37 +01:00
Matthias Wieloch 45b0668211 clk: at91: fix programmable clock for sama5d2
The prescaler formula of the programmable clock has changed for sama5d2.
Update the driver accordingly.

Fixes: a2038077de ("clk: at91: add sama5d2 PMC driver")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[nicolas.ferre@microchip.com: adapt the prescaler range,
		fix clk_programmable_recalc_rate, split patch]
Signed-off-by: Matthias Wieloch <matthias.wieloch@few-bauer.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-18 12:50:31 -07:00
Linus Torvalds dc2535be1f We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
 hardware out there and the normal small fixes and updates, but then we
 have some core framework changes too.
 
 In the core framework, we introduce support for a clk_get_optional() API
 to get clks that may not always be populated and a way to devm manage clkdev
 lookups registered by provider drivers. We also do some refactoring to simplify
 the interface between clkdev and the common clk framework so we can reuse the DT
 parsing and clk_get() path in provider drivers in the future. This work will
 continue in the next few cycles while we convert how providers specify clk
 parents.
 
 On the driver side, the biggest part of the dirstat is the Amlogic clk driver
 that got support for the G12A SoC. It dominates with almost half the overall
 diff, while the second largest part of the diff is in the i.MX clk driver
 that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
 and Qualcomm drivers rounding out the big part of the dirstat because they both
 got new hardware support for SoCs. The rest is just various updates and non-critical
 fixes for existing drivers.
 
 Core:
  - Convert a few clk bindings to JSON schema format
  - Add a {devm_}clk_get_optional() API
  - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
  - Start rewriting clk parent registration and supporting device links
    by moving around code that supports clk_get() and DT parsing of the
    'clocks' property
 
 New Drivers:
  - Add Qualcomm MSM8998 RPM managed clks
  - IPA clk support on Qualcomm RPMh clk controllers
  - Actions Semi S500 SoC clk support
  - Support for fixed rate clks populated from an MMIO register
  - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
  - Add TMU (timer) clocks on Renesas RZ/G2E
  - Add Amlogic G12A Always-On Clock Controller
  - Add 32k clock generation for Amlogic AXG
  - Add support for the Mali GPU clocks on Amlogic Meson8
  - Add Amlogic G12A EE clock controller driver
  - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
  - Add i.MX8MM SoC clk driver support
 
 Removed Drivers:
  - Remove clps711x driver as the board support is gone
 
 Updates:
  - 3rd ECO fix for Mediatek MT2712 SoCs
  - Updates for Qualcomm MSM8998 GCC clks
  - Random static analysis fixes for clk drivers
  - Support for sleeping gpios in the clk-gpio type
  - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
  - Split LCDC into two clks on the Marvell MMP2 SoC
  - Various DT of_node refcount fixes
  - Get rid of CLK_IS_BASIC from TI code (yay!)
  - TI Autoidle clk support
  - Fix Amlogic Meson8 APB clock ID name
  - Claim input clocks through DT for Amlogic AXG and GXBB
  - Correct the DU (display unit) parent clock on Renesas RZ/G2E
  - Exynos5433 IMEM CMU crypto clk support (SlimSS)
  - Fix for the PLL-MIPI on the Allwinner A23
  - Fix Rockchip rk3328 PLL rate calculation
  - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
  - i.MX SCU clk driver clk_set_parent() and cpufreq support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlyIK9URHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtIA//SRHcUJBuF7bgLs0GWDL/C0WwQf90bgLn
 83jMUX9MCIS+/RBEUi/Xf9psGVaW3YPEAiRcYUeI1YIZhCrdZHp2YGClKOpXaXth
 vgM7Je+6Say+7ru6J9eHqhbEgx2e+HqT4shxK5I5J0SqMFgdugim4pthk+Lr/WL0
 bMdNHTERZUFrIId10RxuCH7D72nhkwiRkwNDfWjASKoH3spXLKC1vl/wbS5QDE1O
 eXA9OwkonSyrBKX7zMeQiks6f7HWoJO7ei05Twv4CD9UEeS17KmB6mkbmT3GPAuq
 dWbLOnt7I80fMnthKLIR0IWtJuCvPv3jXgP+Fin+e4wutNCnuduHIVc2XeQYmDaX
 rbo/20q4DarL2AaakuowXA7UJ75zYfxPkwgpwcYZ/QW9yzT6QMfynAYekjJGTdt3
 6VootYAwYIsh1VMGZIQLs23AaNYayDy0QWx/prxnEi95lK/+zjqVySPYC/rWe7XQ
 rUrO6YY0YxRdf5uVHneIfIJGs5F/Q8DgdLXp4tf2Ud2YF1bZ0UQOUKehxwM0rxRX
 F9P6iP6mHUuUPMa9rDlwSmgQXDdqH7E5IbXdSPjEFBogBfmhJfVKAo1EyaZgUytZ
 Y42qG/P3fGGfegfWTRAoaDRJn/+HfEmtREdgQ8JO14xlZwRDb/M43IEiQP4zGwlc
 f/OuWu3O9xA=
 =D4Bv
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...
2019-03-14 08:46:17 -07:00
Mike Rapoport 8a7f97b902 treewide: add checks for the return value of memblock_alloc*()
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com>		[c-sky]
Acked-by: Paul Burton <paul.burton@mips.com>		[MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390]
Reviewed-by: Juergen Gross <jgross@suse.com>		[Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com>		[xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Tony Lindgren d17a718db4 clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
Commit a72d785021 ("clk: ti: Prepare for remove of OF node name")
changed the code to use kasprintf() for provider->clkdm_name but also
changed the offset used later on by three. We don't need to change the
offset as we already have the extra three characters in the format for
kasprintf with "%pOFnxxx".

This caused the clocks with TI_CLK_CLKCTRL_COMPAT to have NULL
clk->clkdm_name for omap4 and 5. And null clkdm_name can cause module
reset, enable, and idle to fail.

The issue can also be seen also when enabling DEBUG for clkctrl.c
and then we start seeing "clock: could not associate" messages for
omap4 and 5 as the generated name is something like "l4_wkclkdm" instead
of "l4_wkup_clkdm" that's needed.

Let's fix the issue with a partial revert of commit a72d785021 ("clk:
ti: Prepare for remove of OF node name").

ALso note that in general code should not depend on the dts node names.
And the node names should be generic types like clock-domain in this case.
This could be fixed later by using separate compatible properties for the
clockdomains, or by adding soc_device_match() table with reg offsets
to the driver. But let's fix the regression first.

Fixes: a72d785021 ("clk: ti: Prepare for remove of OF node name")
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08 10:35:07 -08:00
Kuninori Morimoto 65cf20ad4f clk: fixup default index for of_clk_get_by_name()
of_clk_get_by_name() is using -1 for __of_clk_get() index.  It will go
to of_parse_clkspec(), and be used for of_parse_phandle_with_args().
Here, if user doesn't specify clock name (= of_clk_get_by_name(np,
NULL)), this index is still -1, and of_parse_phandle_with_args() will
return -EINVAL (This index will be updated if if it had clock name).
clk_get_by_name(np, NULL) should work, then, default index should be 0
instead of -1. This patch fixes it.

Fixes: 4472287a3b ("clk: Introduce of_clk_get_hw_from_clkspec()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08 10:35:07 -08:00
Stephen Boyd 5dc7e84268 Merge branch 'clk-parent-rewrite' (early part) into clk-next
* 'clk-parent-rewrite' (early part):
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
2019-03-08 10:35:01 -08:00
Stephen Boyd fea0b0850a Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and 'clk-rockchip' into clk-next
- Convert a few clk bindings to JSON schema format
 - 3rd ECO fix for Mediatek MT2712 SoCs

* clk-typo:
  clk: samsung: fix typo

* clk-json-schema:
  dt-bindings: clock: Convert fixed-factor-clock to json-schema
  dt-bindings: clock: Convert fixed-clock binding to json-schema

* clk-mtk-2712-eco:
  clk: mediatek: update clock driver of MT2712
  dt-bindings: clock: add clock for MT2712

* clk-rockchip:
  clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks
  clk: rockchip: fix frac settings of GPLL clock for rk3328
2019-03-08 10:34:22 -08:00
Stephen Boyd bd5e2ea291 Merge branch 'clk-at91' into clk-next
* clk-at91:
  clk: at91: programmable: remove unneeded register read
  clk: at91: optimize clk_round_rate() for AUDIO_PLL
  clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2
2019-03-08 10:29:47 -08:00
Stephen Boyd efb1e0b071 Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', 'clk-mtk-crit' and 'clk-mtk' into clk-next
* clk-ingenic:
  clk: ingenic: Remove set but not used variable 'enable'
  clk: ingenic: Fix doc of ingenic_cgu_div_info
  clk: ingenic: Fix round_rate misbehaving with non-integer dividers
  clk: ingenic: jz4740: Fix gating of UDC clock

* clk-mtk-mux:
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2

* clk-qcom-sdm845-pcie:
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks

* clk-mtk-crit:
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro

* clk-mtk:
  clk: mediatek: correct cpu clock name for MT8173 SoC
2019-03-08 10:29:30 -08:00
Stephen Boyd 75f486c015 Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next
- Updates for qcom MSM8998 GCC clks
 - qcom MSM8998 RPM managed clks
 - Random static analysis fixes for clk drivers

* clk-qcom-msm8998:
  clk: qcom: Make common clk_hw registrations
  clk: qcom: smd: Add support for MSM8998 rpm clocks
  clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
  clk: qcom: Add missing freq for usb30_master_clk on 8998
  clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks

* clk-fractional-parent:
  clk: fractional-divider: check parent rate only if flag is set

* clk-x86-mv:
  clk: x86: Move clk-lpss.h to platform_data/x86

* clk-SA-fixes:
  clk: mediatek: fix platform_no_drv_owner.cocci warnings
  clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
  clk: qoriq: Improve an error message
2019-03-08 10:29:15 -08:00
Stephen Boyd 461ea6ab2c Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', 'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next
- IPA clk support on Qualcomm RPMh clk controllers
 - Support sleeping gpios in clk-gpio type
 - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
 - Actions Semi S500 SoC clk support

* clk-qcom-rpmh:
  clk: qcom: clk-rpmh: Add IPA clock support

* clk-gpio-sleep:
  clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk

* clk-stm32mp1:
  dt-bindings: clock: remove unused definition for stm32mp1
  clk: stm32mp1: fix bit width of hse_rtc divider
  clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag
  clk: stm32mp1: fix HSI divider flag
  clk: stm32mp1: fix mcu divider table
  clk: stm32mp1: set ck_csi as critical clock
  clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks
  clk: stm32mp1: parent clocks update

* clk-qcom-qcs404:
  clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock
  clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs
  clk: qcom: remove empty lines in clk-rcg.h

* clk-actions-s500:
  clk: actions: Add clock driver for S500 SoC
  dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU
  clk: actions: Add configurable PLL delay
2019-03-08 10:27:52 -08:00
Stephen Boyd e7faa095cb Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next
- Split LCDC into two clks on the Marvell MMP2 SoC

* clk-imx:
  clk: imx8mq: add GPIO clocks to clock tree
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: imx: imx8mm: Mark init function __init
  clk: imx8mq: Add the missing ARM clock
  dt-bindings: imx8mq-clock: Add the missing ARM clock
  clk: imx: imx8mq: Fix the rate propagation for arm pll
  clk: imx8mq: Add support for the CLKO1 clock
  clk: imx8mq: Fix the CLKO2 source select list
  clk: imx8mq: Add missing M4 clocks
  clk: imx: Add clock driver support for imx8mm
  dt-bindings: imx: Add clock binding doc for imx8mm
  clk: imx: Add PLLs driver for imx8mm soc
  clk: imx5: add imx5_SCC2_IPG_GATE
  clk: imx: scu: add set parent support
  clk: imx: scu: add fallback compatible string support
  clk: imx8mq: Make parent names arrays const pointers
  clk: imx: Make parents const pointer in mux wrappers
  clk: imx: Make parent_names const pointer in composite-8m

* clk-samsung:
  clk: samsung: s3c2443: Mark expected switch fall-through
  clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
  clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
  clk: samsung: exynos5433: Add selected IMEM clocks
  clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
  clk: samsung: exynos5433: Fix name typo in sssx
  clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
  clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs

* clk-ti:
  clk: clk-twl6040: Fix imprecise external abort for pdmclk
  ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
  clk: ti: check clock type before doing autoidle ops
  clk: ti: add a usecount for autoidle
  clk: ti: generalize the init sequence of clk_hw_omap clocks
  clk: ti: remove usage of CLK_IS_BASIC
  clk: ti: add new API for checking if a provided clock is an OMAP clock
  clk: ti: move clk_hw_omap list handling under generic part of the driver

* clk-uniphier-gear:
  clk: uniphier: Fix update register for CPU-gear

* clk-mmp2-lcdc:
  clk: mmp2: separate LCDC peripheral clk form the display clock
  dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08 10:27:40 -08:00
Stephen Boyd 3f8e7e7247 Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', 'clk-meson' and 'clk-renesas' into clk-next
- Add a {devm_}clk_get_optional() API
 - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups

* clk-optional:
  clk: Add (devm_)clk_get_optional() functions
  clk: Add comment about __of_clk_get_by_name() error values

* clk-devm-clkdev-register:
  clk: clk-st: avoid clkdev lookup leak at remove
  clk: clk-max77686: Clean clkdev lookup leak and use devm
  clkdev: add managed clkdev lookup registration

* clk-allwinner:
  clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it

* clk-meson: (22 commits)
  clk: meson: meson8b: fix the naming of the APB clocks
  dt-bindings: clock: meson8b: add APB clock definition
  clk: meson: Add G12A AO Clock + Reset Controller
  dt-bindings: clk: add G12A AO Clock and Reset Bindings
  clk: meson: factorise meson64 peripheral clock controller drivers
  clk: meson: g12a: add peripheral clock controller
  dt-bindings: clk: meson: add g12a periph clock controller bindings
  clk: meson: pll: update driver for the g12a
  clk: meson: rework and clean drivers dependencies
  clk: meson: axg-audio does not require syscon
  clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
  clk: export some clk_hw function symbols for module drivers
  clk: meson: ao-clkc: claim clock controller input clocks from DT
  clk: meson: axg: claim clock controller input clock from DT
  clk: meson: gxbb: claim clock controller input clock from DT
  clk: meson: meson8b: add the GPU clock tree
  clk: meson: meson8b: use a separate clock table for Meson8
  clk: meson: axg-ao: add 32k generation subtree
  clk: meson: gxbb-ao: replace cec-32k with the dual divider
  clk: meson: add dual divider clock driver
  ...

* clk-renesas:
  clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Add TMU clock
  clk: renesas: r8a77980: Add RPC clocks
  clk: renesas: rcar-gen3: Add RPC clocks
  clk: renesas: rcar-gen3: Add spinlock
  clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
  clk: renesas: r8a774c0: Correct parent clock of DU
  clk: renesas: r8a774a1: Add missing CANFD clock
  clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-08 10:27:21 -08:00
Stephen Boyd 7e2570031a Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', 'clk-socfpga-parent' and 'clk-struct-size' into clk-next
- Various DT of_node refcount fixes
 - Support for fixed rate clks populated from an MMIO register
 - Remove clps711x driver as the board support is gone

* clk-of-refcount:
  clk: dove: fix refcount leak in dove_clk_init()
  clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()
  clk: armada-xp: fix refcount leak in axp_clk_init()
  clk: kirkwood: fix refcount leak in kirkwood_clk_init()
  clk: armada-370: fix refcount leak in a370_clk_init()
  clk: vf610: fix refcount leak in vf610_clocks_init()
  clk: imx7d: fix refcount leak in imx7d_clocks_init()
  clk: imx6sx: fix refcount leak in imx6sx_clocks_init()
  clk: imx6q: fix refcount leak in imx6q_clocks_init()
  clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()
  clk: socfpga: fix refcount leak
  clk: ti: fix refcount leak in ti_dt_clocks_register()
  clk: qoriq: fix refcount leak in clockgen_init()
  clk: highbank: fix refcount leak in hb_clk_init()

* clk-mmio-fixed-clock:
  clk: Add Fixed MMIO clock driver
  dt-bindings: clk: Add bindings for Fixed MMIO clock

* clk-remove-clps:
  clk: clps711x: Remove board support

* clk-socfpga-parent:
  clk: socfpga: Don't have get_parent for single parent ops

* clk-struct-size:
  clk: imx: imx7ulp: use struct_size() in kzalloc()
2019-03-08 10:26:59 -08:00
Linus Torvalds 384d11fa0e ARM: SoC driver updates for 5.1
As usual, the drivers/tee and drivers/reset subsystems get merged
 here, with the expected set of smaller updates and some new hardware
 support. The tee subsystem now supports device drivers to be attached
 to a tee, the first example here is a random number driver with its
 implementation in the secure world.
 
 Three new power domain drivers get added for specific chip families:
  - Broadcom BCM283x chips (used in Raspberry Pi)
  - Qualcomm Snapdragon phone chips
  - Xilinx ZynqMP FPGA SoCs
 
 One new driver is added to talk to the BPMP firmware on NVIDIA
 Tegra210
 
 Existing drivers are extended for new SoC variants from NXP,
 NVIDIA, Amlogic and Qualcomm.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfpKpAAoJEGCrR//JCVInMpYQANwKKWOTm5NHqtf7/ZKBzx6/
 Yk7Jj8QLGKrHScnuBZSBvTwv5Cc5O5Ye+tAuGVArOoD2ktXlLZmHZ/ZPFAudT3di
 aFYbA44RNhv+O/xOmToDCCjSHm176hwUY0Cs5bFnfx6TcMsdOYIQIG+XQKx/a9zg
 3ZBEv7wZqcBArLc0X2Z2/uiVrEIh3wWwXytvw+8TG8ifUfpbDxRUxDlj1JRDpjMu
 yX4q8JDhdQvi2FTXbXcEHTdQ6RT11svPM/YxQDxfULRK9aNKf4GZJ4QlwZy+SO7N
 cEFxDd4ML/iJ1LjalvtXGkR0xrw9/gOlO3vbB9Uw3EngBDUSQfHmqJet10a14l8q
 KcToe3teIB+Z1R+plrt+h5UDJTbVibgZXhU6wIdkDgtF6oTyg1moIbTqNKHgcA3b
 HLJv4gFejeluQzJ/3dZHBnkvJo1XFAvGFmFXle0bmJRFtDx73CKnf6MA9N82l2/x
 nTn4LTxXIJVKWTWAs1qkrFyIx1gOrpGhiHPQ2JiOPMZLstz3Sr6tiJuWOr+1Ex4/
 UlZsD/CrRb+SbPBonpkD+bvzSR+j0M72A7hGmfZcDzainciWgunyXglUlzO/MT24
 C6p4R9MZ2Fffoe8pESppabRNUItp8gNsNGI7CY1IK8pgpxLrujw8OnqykpV0VETo
 As+6dZrHfPNSuI7udJi5
 =+DOl
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, the drivers/tee and drivers/reset subsystems get merged
  here, with the expected set of smaller updates and some new hardware
  support. The tee subsystem now supports device drivers to be attached
  to a tee, the first example here is a random number driver with its
  implementation in the secure world.

  Three new power domain drivers get added for specific chip families:
   - Broadcom BCM283x chips (used in Raspberry Pi)
   - Qualcomm Snapdragon phone chips
   - Xilinx ZynqMP FPGA SoCs

  One new driver is added to talk to the BPMP firmware on NVIDIA
  Tegra210

  Existing drivers are extended for new SoC variants from NXP, NVIDIA,
  Amlogic and Qualcomm"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
  tee: optee: update optee_msg.h and optee_smc.h to dual license
  tee: add cancellation support to client interface
  dpaa2-eth: configure the cache stashing amount on a queue
  soc: fsl: dpio: configure cache stashing destination
  soc: fsl: dpio: enable frame data cache stashing per software portal
  soc: fsl: guts: make fsl_guts_get_svr() static
  hwrng: make symbol 'optee_rng_id_table' static
  tee: optee: Fix unsigned comparison with less than zero
  hwrng: Fix unsigned comparison with less than zero
  tee: fix possible error pointer ctx dereferencing
  hwrng: optee: Initialize some structs using memset instead of braces
  tee: optee: Initialize some structs using memset instead of braces
  soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
  clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
  soc: qcom: llcc-slice: Fix typos
  qcom: soc: llcc-slice: Consolidate some code
  qcom: soc: llcc-slice: Clear the global drv_data pointer on error
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  ...
2019-03-06 09:41:12 -08:00
Stephen Boyd cf13f28968 clk: Move of_clk_*() APIs into clk.c from clkdev.c
The API between clk.c and clkdev.c is purely getting the clk_hw
structure (or the struct clk if it's not CCF) and then turning that
struct clk_hw pointer into a struct clk pointer via clk_hw_create_clk().
There's no need to complicate clkdev.c with these DT parsing details
that are only relevant to the common clk framework. Move the DT parsing
logic into the core framework and just expose the APIs to get a clk_hw
pointer and convert it.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01 11:17:22 -08:00
Stephen Boyd efa850487a clk: Inform the core about consumer devices
We'd like to have a pointer to the device that's consuming a particular
clk in the clk framework so we can link the consumer to the clk provider
with a PM device link. Add a device argument to clk_hw_create_clk() for
this so it can be used in subsequent patches to add and remove the link.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01 11:17:22 -08:00
Stephen Boyd 4472287a3b clk: Introduce of_clk_get_hw_from_clkspec()
We want to get struct clk_hw pointers from a DT clk specifier (i.e. a
clocks property) so that we can find parent clks without searching for
globally unique clk names. This should save time by avoiding the global
string search for clks that are external to the clock controller
providing the clk and let us move away from string comparisons in
general.

Introduce of_clk_get_hw_from_clkspec() which is largely the DT parsing
part of finding clks implemented in clkdev.c and have that return a
clk_hw pointer instead of converting that into a clk pointer. This lets
us push up the clk pointer creation to the caller in clk_get() and
avoids the need to push the dev_id and con_id throughout the DT parsing
code.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01 11:17:22 -08:00
Miquel Raynal 2447883934 clk: core: clarify the check for runtime PM
Currently, the core->dev entry is populated only if runtime PM is
enabled. Doing so prevents accessing the device structure in any
case.

Keep the same logic but instead of using the presence of core->dev as
the only condition, also check the status of
pm_runtime_enabled(). Then, we can set the core->dev pointer at any
time as long as a device structure is available.

This change will help supporting device links in the clock subsystem.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
[sboyd@kernel.org: Change to a boolean flag]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01 11:17:16 -08:00
Stephen Boyd 1df4046a93 clk: Combine __clk_get() and __clk_create_clk()
The __clk_get() function is practically a private clk implementation
detail now. No architecture defines it, and given that new code should
be using the common clk framework there isn't a need for it to keep
existing just to serve clkdev purposes. Let's fold it into the
__clk_create_clk() function and make that a little more generic by
renaming it to clk_hw_create_clk(). This will allow the framework to
create a struct clk handle to a particular clk_hw pointer and link it up
as a consumer wherever that's needed.

Doing this also lets us get rid of the __clk_free_clk() API that had to
be kept in sync with __clk_put(). Splitting that API up into the "link
and unlink from consumer list" phase and "free the clk pointer" phase
allows us to reuse that logic in a couple places, simplifying the code.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01 11:16:14 -08:00
Anson Huang 0c91c11c7d clk: imx8mq: add GPIO clocks to clock tree
i.MX8MQ has clock gate for each GPIO bank, add them
into clock tree for GPIO driver to manage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-28 10:28:28 -08:00
Seiya Wang 64f4466c88 clk: mediatek: correct cpu clock name for MT8173 SoC
Correct cpu clock name from ca57 to ca72 since MT8173 does use cortex-a72.

Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 10:17:40 -08:00
Abel Vesa e9dda4af68 clk: imx: Refactor entire sccg pll clk
Make the entire combination of plls to be one single clock. The parents used
for bypasses are specified each as an index in the parents list.
The determine_rate does a lookup throughout all the possible combinations
for all the divs and returns the best possible 'setup' which in turn is used
by set_rate later to set up all the divs and bypasses.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 10:09:31 -08:00
Anson Huang 3b9ea606cd clk: imx: scu: add cpu frequency scaling support
On NXP's i.MX SoCs with system controller inside, CPU frequency
scaling can ONLY be done by system controller firmware, and it
can ONLY be requested from secure mode, so Linux kernel has to
call ARM SMC to trap to ARM-Trusted-Firmware to request system
controller firmware to do CPU frequency scaling.

This patch adds i.MX system controller CPU frequency scaling support,
it reuses cpufreq-dt driver and implement the CPU frequency scaling
inside SCU clock driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 10:03:38 -08:00
Jasper Mattsson b35656de2a clk: mediatek: Mark bus and DRAM related clocks as critical
Currently, DRAM-related clocks are not marked with CLK_IS_CRITICAL
for MT6797. This causes memory corruption when the system is
booted without clk_ignore_unused.
This patch marks MUX ddrphycfg_sel as well as gates infra_dramc_f26m
and infra_dramc_b_f26m as CLK_IS_CRITICAL.

Signed-off-by: Jasper Mattsson <jasu@njomotys.info>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 09:54:50 -08:00
Jasper Mattsson 5a1cc4c27a clk: mediatek: Add flags to mtk_gate
This is required to mark gates as CLK_IS_CRITICAL.

Signed-off-by: Jasper Mattsson <jasu@njomotys.info>
Acked-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 09:53:39 -08:00
Jasper Mattsson 03c4fda603 clk: mediatek: Add MUX_FLAGS macro
This is required to mark outputs of certain MUXes as CLK_IS_CRITICAL.

Signed-off-by: Jasper Mattsson <jasu@njomotys.info>
Acked-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 09:53:30 -08:00
Bjorn Andersson 4b5a59a265 clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
The PCIe PIPE clock in the GCC is fed by the PIPE clock coming from the
PHY, describe this relationship.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 09:41:52 -08:00
YueHaibing 635bd69bbe clk: ingenic: Remove set but not used variable 'enable'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/clk/ingenic/cgu.c: In function 'ingenic_pll_recalc_rate':
drivers/clk/ingenic/cgu.c:86:15: warning:
 variable 'enable' set but not used [-Wunused-but-set-variable]

It's not used after commit ab27eb4bc3 ("clk: ingenic: Add code to
enable/disable PLLs")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26 09:41:04 -08:00
Nicolas Ferre 97d010dc42 clk: at91: programmable: remove unneeded register read
This register read is a leftover of a previous read/modify/write. We now use
regmap_update_bits(), so we don't need it anymore.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25 09:23:45 -08:00
chunhui dai d3174bc836 clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
The MUX clock of dpi1_sel should select the closet clock for itself.
We could add this flag to enable this function of MUX in CCF.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: wangyan wang <wangyan.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25 09:19:33 -08:00
chunhui dai b026a7eca1 clk: mediatek: add MUX_GATE_FLAGS_2
Add MUX_GATE_FLAGS_2 for the clock which needs to set two falgs.
Such as some mux need to set the flags of "CLK_MUX_ROUND_CLOSEST".

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: wangyan wang <wangyan.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25 09:19:32 -08:00
Fabrizio Castro df446f7e6e clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD
was recently added and it's the core clock with the highest
index.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Fixes: 9d034e151b ("clk: renesas: r8a774a1: Add missing CANFD clock")
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25 09:13:19 -08:00
Paul Cercueil 7ca4c922aa clk: ingenic: Fix doc of ingenic_cgu_div_info
The 'div' field does not represent a number of bits used to divide
(understand: right-shift) the divider, but a number itself used to
divide the divider.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 10:13:44 -08:00
Paul Cercueil bc5d922c93 clk: ingenic: Fix round_rate misbehaving with non-integer dividers
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz.
This results in a theorical divider of 41.999993 which is then rounded
up to 42. The .round_rate function would then return (180 MHz / 42) as
the clock, rounded down, so 4.285714 MHz.

Calling clk_set_rate on 4.285714 MHz would round the rate again, and
give a theorical divider of 42,0000028, now rounded up to 43, and the
rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not
what we requested.

Fix this by rounding up the divisions.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 10:13:43 -08:00
YueHaibing 8122966318 clk: mediatek: fix platform_no_drv_owner.cocci warnings
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 10:01:31 -08:00
YueHaibing e7e6198c60 clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().

Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 10:01:21 -08:00
Dan Carpenter 8f99f5eab0 clk: qoriq: Improve an error message
We intended to print "ret" but there is a copy and paste bug from the
previous error message.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 10:00:45 -08:00
Michał Mirosław bb631af3d5 clk: at91: optimize clk_round_rate() for AUDIO_PLL
Stop the search for parent rate when exact match is found.

This makes for 3 clk_round_rate() calls instead of 64 of them on
SAMA5D2-based board when searching for 12.288MHz clock.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 09:54:17 -08:00
Andy Shevchenko a9443a6328 clk: x86: Move clk-lpss.h to platform_data/x86
clk-lpss.h is solely x86 related header. Move it to correct folder.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 00:14:31 -08:00