Commit Graph

103 Commits

Author SHA1 Message Date
Martin Blumenstingl 8a42d3fc9d nvmem: meson-mx-efuse: fix reading from an offset other than 0
meson_mx_efuse_read calculates the address internal to the eFuse based
on the offset and the word size. This works fine with any given offset.
However, the offset is also included when writing to the output buffer.
This means that reading 4 bytes at offset 500 tries to write beyond the
array allocated by the nvmem core as it wants to write the 4 bytes to
"buffer address + offset (500)".
This issue did not show up in the previous tests since no driver uses
any value from the eFuse yet and reading the eFuse via sysfs simply
reads the whole eFuse, starting at offset 0.

Fix this by only including the offset in the internal address
calculation.

Fixes: 8caef1fa91 ("nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-23 16:46:23 +01:00
Linus Torvalds 2bf16b7a73 Char/Misc patches for 4.15-rc1
Here is the big set of char/misc and other driver subsystem patches for
 4.15-rc1.
 
 There are small changes all over here, hyperv driver updates, pcmcia
 driver updates, w1 driver updats, vme driver updates, nvmem driver
 updates, and lots of other little one-off driver updates as well.  The
 shortlog has the full details.
 
 Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when
 merging to your tree as one lkdtm patch came in through the perf tree as
 well as this one.  The resolution is to take the const change that this
 tree provides.
 
 All of these have been in linux-next for quite a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a
 sBi6WS87In5v1QO1Rgfc
 =dH2a
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem patches
  for 4.15-rc1.

  There are small changes all over here, hyperv driver updates, pcmcia
  driver updates, w1 driver updats, vme driver updates, nvmem driver
  updates, and lots of other little one-off driver updates as well. The
  shortlog has the full details.

  All of these have been in linux-next for quite a while with no
  reported issues"

* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  VME: Return -EBUSY when DMA list in use
  w1: keep balance of mutex locks and refcnts
  MAINTAINERS: Update VME subsystem tree.
  nvmem: sunxi-sid: add support for A64/H5's SID controller
  nvmem: imx-ocotp: Update module description
  nvmem: imx-ocotp: Enable i.MX7D OTP write support
  nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
  nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
  nvmem: imx-ocotp: Add support for banked OTP addressing
  nvmem: imx-ocotp: Pass parameters via a struct
  nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
  nvmem: uniphier: add UniPhier eFuse driver
  dt-bindings: nvmem: add description for UniPhier eFuse
  nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
  nvmem: qfprom: fix different address space warnings of sparse
  nvmem: mtk-efuse: fix different address space warnings of sparse
  nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
  nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
  thunderbolt: tb: fix use after free in tb_activate_pcie_devices
  MAINTAINERS: Add git tree for Thunderbolt development
  ...
2017-11-16 09:10:59 -08:00
Icenowy Zheng b7fe57b802 nvmem: sunxi-sid: add support for A64/H5's SID controller
Allwinner A64/H5 SoCs come with a SID controller like the one in H3, but
without the silicon bug that makes the initial value at 0x200 wrong, so
the value at 0x200 can be directly read.

Add support for this kind of SID controller.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:06 +01:00
Bryan O'Donoghue aef9a4de2a nvmem: imx-ocotp: Update module description
This imx-ocotp driver encapsulates support for a subset of both i.MX6 and
i.MX7 processors. Update the module description to reflect.

Fixes: 711d454779 ("nvmem: octop: Add i.MX7D support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:06 +01:00
Bryan O'Donoghue a32bab320f nvmem: imx-ocotp: Enable i.MX7D OTP write support
After applying patches for both banked access and write timings we can
re-enable the OTP write interface on i.MX7D processors.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:06 +01:00
Bryan O'Donoghue 828ae7a47c nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
This patch adds logic to correctly setup the write timing parameters
when blowing an OTP fuse for the i.MX7S/D.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:05 +01:00
Bryan O'Donoghue b50cb68f16 nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
The i.MX7S/D has a different set of timing requirements, as a pre-cursor to
adding the i.MX7 timing parameters, move the i.MX6 stuff to a dedicated
function.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:05 +01:00
Bryan O'Donoghue ffd9115f65 nvmem: imx-ocotp: Add support for banked OTP addressing
The i.MX7S/D takes the bank address in the CTRLn.ADDR field and the data
value in one of the DATAx {0, 1, 2, 3} register fields. The current write
routine is based on writing the CTRLn.ADDR field and writing a single DATA
register only.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:05 +01:00
Bryan O'Donoghue e20d2b291b nvmem: imx-ocotp: Pass parameters via a struct
It will be useful in later patches to know the register access mode and
bit-shift to apply to a given input offset.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:05 +01:00
Bryan O'Donoghue 9d6a8dab8d nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
i.MX7S/D have a different scheme for addressing the OTP registers inside
the OCOTP block. Currently it's possible to address the wrong OTP registers
given the disparity between IMX6 and IMX7 OTP addressing.

Since OTP programming is one-time destructive its important we restrict
this interface ASAP.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:05 +01:00
Keiji Hayashibara 71c5dd5002 nvmem: uniphier: add UniPhier eFuse driver
Add eFuse driver for Socionext UniPhier series SoC.
Note that eFuse device is under soc-glue and this register
implements as read only.

Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 14:19:05 +01:00
Masahiro Yamada 17eb18d674 nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
All nvmem drivers are supposed to set the owner field of struct
nvmem_config, but this matches nvmem->dev->driver->owner.

As far as I see in drivers/nvmem/ directory, all the drivers are
the case.  So, make nvmem_register() set the nvmem's owner to the
associated driver's owner unless nvmem_config sets otherwise.

Remove .owner settings in the drivers that are now redundant.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 13:54:17 +01:00
Masahiro Yamada ec3672b81f nvmem: qfprom: fix different address space warnings of sparse
Fix the following sparse warnings:

drivers/nvmem/qfprom.c:23:30: warning: incorrect type in initializer (different address spaces)
drivers/nvmem/qfprom.c:23:30:    expected void [noderef] <asn:2>*base
drivers/nvmem/qfprom.c:23:30:    got void *context
drivers/nvmem/qfprom.c:36:30: warning: incorrect type in initializer (different address spaces)
drivers/nvmem/qfprom.c:36:30:    expected void [noderef] <asn:2>*base
drivers/nvmem/qfprom.c:36:30:    got void *context
drivers/nvmem/qfprom.c:76:22: warning: incorrect type in assignment (different address spaces)
drivers/nvmem/qfprom.c:76:22:    expected void *static [toplevel] [assigned] priv
drivers/nvmem/qfprom.c:76:22:    got void [noderef] <asn:2>*[assigned] base

The type of nvmem_config->priv is (void *), so sparse complains
about assignment of the base address with (void __iomem *) type.

Even if we cast it out, sparse still warns:
warning: cast removes address space of expression

Of course, we can shut up the sparse by marking __force, but a more
correct way is to put the base address into driver private data.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 13:54:17 +01:00
Masahiro Yamada a48f1fff7e nvmem: mtk-efuse: fix different address space warnings of sparse
Fix the following sparse warnings:

drivers/nvmem/mtk-efuse.c:24:30: warning: incorrect type in initializer (different address spaces)
drivers/nvmem/mtk-efuse.c:24:30:    expected void [noderef] <asn:2>*base
drivers/nvmem/mtk-efuse.c:24:30:    got void *context
drivers/nvmem/mtk-efuse.c:37:30: warning: incorrect type in initializer (different address spaces)
drivers/nvmem/mtk-efuse.c:37:30:    expected void [noderef] <asn:2>*base
drivers/nvmem/mtk-efuse.c:37:30:    got void *context
drivers/nvmem/mtk-efuse.c:69:23: warning: incorrect type in assignment (different address spaces)
drivers/nvmem/mtk-efuse.c:69:23:    expected void *priv
drivers/nvmem/mtk-efuse.c:69:23:    got void [noderef] <asn:2>*[assigned] base

The type of nvmem_config->priv is (void *), so sparse complains
about assignment of the base address with (void __iomem *) type.

Even if we cast it out, sparse still warns:
warning: cast removes address space of expression

Of course, we can shut up the sparse by marking __force, but a more
correct way is to put the base address into driver private data.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 13:54:16 +01:00
Masahiro Yamada 4dd5f60e9a nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem_register() copies all the members of nvmem_config to
nvmem_device.  So, nvmem_config is one-time use data during
probing.  There is no point to keep it until the driver detach.
Using stack should be no problem because nvmem_config is pretty
small.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 13:54:16 +01:00
Masahiro Yamada 01d35cabd5 nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
nvmem_register() copies all the members of nvmem_config to
nvmem_device.  So, nvmem_config is one-time use data during
probing.  There is no point to keep it until the driver detach.
Using stack should be no problem because nvmem_config is pretty
small.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08 13:54:16 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Martin Blumenstingl 8caef1fa91 nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs
This adds a driver to access the efuse on Amlogic Meson6, Meson8 and
Meson8b SoCs.
These SoCs are accessing the efuse IP block directly through the
registers in the "secbus" region. This makes it different from the Meson
GX efuse driver which uses the "secure monitor" firmware to access the
efuse.

The efuse on Meson6 can only read one byte at a time, while the efuse on
Meson8 and Meson8b always reads 4 bytes at a time. The new driver
supports both, but due to lack of hardware Meson6 support was not tested.

The hardware also supports writing. However, this is currently not
supported by the driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20 15:38:02 +02:00
Martin Blumenstingl 9593ad32b8 nvmem: meson-efuse: indicate that this driver is only for Meson GX SoCs
The current Amlogic Meson eFuse driver only supports the 64-bit SoCs
(GXBB and newer). Older SoCs cannot be supported by the same driver
because they do not use the meson secure monitor firmware to access the
hardware.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20 15:38:02 +02:00
Romain Perier 7a15cf2af4 nvmem: rockchip: add support for RK3368
This adds the necessary function for handling support on RK3368 SoCs

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20 15:38:02 +02:00
Greg Kroah-Hartman 58f2c391cc Merge 4.14-rc5 into char-misc-next
We need the fixes in here to resolve merge issues and for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-16 09:22:22 +02:00
Oleksij Rempel 988437aec0 nvmem: add snvs_lpgpr driver
This is a driver for Low Power General Purpose Register (LPGPR)
available on i.MX6 SoCs in Secure Non-Volatile Storage (SNVS)
of this chip.

It is a 32-bit read/write register located in the low power domain.
Since LPGPR is located in the battery-backed power domain, LPGPR can
be used by any application for retaining data during an SoC power-down
mode.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04 10:30:53 +02:00
Masahiro Yamada e701c67c30 nvmem: remove unneeded IS_ENABLED(CONFIG_NVMEM) conditional
As you see in drivers/nvmem/Makefile, this C file is compiled only
when CONFIG_NVMEM is y or m.

So, IS_ENABLED(CONFIG_NVMEM) is always evaluated to 1 in this file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 16:20:26 +02:00
Masahiro Yamada f7c04f16d7 nvmem: remove inline in drivers/nvmem/core.c
These two functions are defined in .c file, but called just once
(at least for now).  So, the compiler will fold them into their
callers even without the "inline" markers.

However, this kind of optimization should not be done by hand.
It is compiler's judge after all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 16:20:26 +02:00
Masahiro Yamada aad8d097c9 nvmem: add missing of_node_put() in of_nvmem_cell_get()
of_get_next_parent() increments the refcount of the returned node.
It should be put when done.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 16:12:26 +02:00
Guy Shapiro 38b0774c05 nvmem: core: return EFBIG on out-of-range write
When writing data that exceeds the nvmem size to a nvmem sysfs file
using the sh redirection operator >, the shell hangs, trying to
write the out-of-range bytes endlessly.

Fix the problem by returning EFBIG described in man 2 write.

Similar change was done for binary sysfs files on commit
0936896056

Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com>
Cc: linux-api@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 16:12:26 +02:00
Dan Carpenter fd08611317 nvmem: core: remove unneeded NULL check
"p" is the list iterator so it can't be NULL.  Static checkers complain
about this unnecessary check because we dereference the list iterator to
get the next item in the list so we'd be in trouble if it really was
NULL.  I have removed the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:33:23 +02:00
Leonard Crestez d026d70a2e nvmem: core: Add nvmem_cell_read_u32
This function does a quick and easy read of an u32 value without any
kind of resource management code on the consumer side.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:33:23 +02:00
Rob Herring 5f214ccdd1 nvmem: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:33:22 +02:00
Philipp Zabel aed0c46e32 nvmem: lpc18xx-eeprom: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Joachim Eastwood <manabian@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:33:22 +02:00
Frank Wang d6e4bd1b52 nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
As the comments from Heiko Stuebner <heiko@sntech.de> that compatible
should not contain any placeholders, this patch fix it for rk3228 SoC.

Note that this is a fix for v4.13, due to fixing the current non-standard
binding name that should not become part of an official kernel release.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 16:15:57 +02:00
Finley Xiao 820de1fb69 nvmem: rockchip-efuse: add support for rk322x-efuse
This adds the necessary data for handling eFuse on the rk322x.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 12:08:27 +02:00
Heiner Kallweit 666d6a3623 nvmem: core: add locking to nvmem_find_cell
Adding entries to nvmem_cells and deleting entries from it is
protected by nvmem_cells_mutex. Therefore this mutex should
also protect iterating over the list.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 12:08:27 +02:00
Andrey Smirnov 79fbf0468b nvmem: core: Call put_device() in nvmem_unregister()
Call put_device() in nvmem_unregister() to make sure nvmem_release
gets called freeing up allocated resources.

Cc: cphealy@gmail.com
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 12:08:27 +02:00
Johan Hovold 3360acdf83 nvmem: core: fix leaks on registration errors
Make sure to deregister and release the nvmem device and underlying
memory on registration errors.

Note that the private data must be freed using put_device() once the
struct device has been initialised.

Also note that there's a related reference leak in the deregistration
function as reported by Mika Westerberg which is being fixed separately.

Fixes: b6c217ab9b ("nvmem: Add backwards compatibility support for older EEPROM drivers.")
Fixes: eace75cfdc ("nvmem: Add a simple NVMEM framework for nvmem providers")
Cc: stable <stable@vger.kernel.org>     # 4.3
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 12:08:27 +02:00
Oza Pawandeep e827756d64 nvmem: correct Broadcom OTP controller driver writes
- use data write offset to write otp data instead of read offset
- use OTP program command 0x8 to write otp with ECC rather than just
command 0xA without ECC

Fixes: 9d59c6e8ae ("nvmem: Add the Broadcom OTP controller driver")
Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 12:08:27 +02:00
Linus Torvalds 0160e00ae8 ARM: SoC driver updates
Driver updates for ARM SoCs.
 
 * Reset subsystem, merged through arm-soc by tradition:
  - Make bool drivers explicitly non-modular
  - New support for i.MX7 and Arria10 reset controllers
 
 * PATA driver for Palmchip BK371 (acked by Tejun)
 
 * Power domain drivers for i.MX (GPC, GPCv2)
  - Moved out of mach-imx for GPC
  - Bunch of tweaks, fixes, etc
 
 * PMC support for Tegra186
 
 * SoC detection support for Renesas RZ/G1H and RZ/G1N
 
 * Move Tegra flow controller driver from mach directory to drivers/soc
  - (Power management / CPU power driver)
 
 * Misc smaller tweaks for other platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEAZuAAoJEIwa5zzehBx3jCEP/1dcXY746rQoOMUDPyWF5+SZ
 w0l8dHUQhu4WjNGryfb9DbyiE3d6xlvPVzr9AJeAg6c5I+iikgeogS0XHNpWCU96
 FR1Ftb6zo8DIaGognBL9bK5HM7NXjd/EKBkMk0Ggs9/NRFUnakkbpdfivsl2BACx
 mCGo15+kbgQSQsMJtd5/KfsgY5h7lXJG0fZ8LV5E1E5BSa/AofZtKVgCKfhbd0zV
 gQqm7xfxtURHtucc7MYNEoKNk5rlrZhOlG6DdG0d6+rscCBrmL1I5giqm8y24+wW
 z+JJuk21+oVtltLz09JuX51xur3CGyJ+qNJdRPE1P1Udn7wj5zA+ew9qqJi1cgNf
 63tBxooBpH6R8dGcOfjKECD6lBBqBr/Dd8ReWbMyn0XF1HMAxgpfPtExu9WcDzGu
 9Fr/shUiEA3jqhbzSy6DCHugpnHPdHPyY64MqzisgOEVsituQ7MSefTIGSNusDlk
 K36I7j93mDAF5y2fTXqbjZKoRuu6KCySvGDXzBqGwhcNzUQk14iPwjtMDZ/l9Raj
 sQJCUxHntUovHs+VTCwS7ahqZyn0VRNx2bt1aJXNHKzuUovpA9/X5X9HCRZJDovB
 0bCGQZ124+H/VsWvSjVtIh7oknU3vSQJPxS6KLKoi3rvywuqW562lGjCTqvjBJKD
 FMZ5NA8VoWXM2rgTDOyx
 =B43K
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...
2017-05-09 10:01:15 -07:00
Richard Leitner 0642bac7da nvmem: imx-ocotp: add write support
Implement write routine for OCOTP controller found in i.MX6 SoC's.
Furthermore add locking to the read function to prevent race conditions.
The write routine code is based on the fsl_otp driver from Freescale.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Richard Leitner 9b66587ee2 nvmem: imx-ocotp: clear error bit after reading locked values
When reading a "read locked" value from the OCOTP controller on i.MX6
SoC's an error bit is set. This bit has to be cleared by software before
any new write, read or reload access can be issued.

Therefore clear it after we detect such an "locked read".

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Peng Fan 711d454779 nvmem: octop: Add i.MX7D support
Add i.MX7D support.
There is 16 banks, each bank 4 words.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Michael Grzeschik c066c1c0e4 nvmem: Add driver for the i.MX IIM
This adds a readonly nvmem driver for the i.MX IC Identification Module
(IIM). The IIM is found on the older i.MX SoCs like the i.MX25, i.MX27,
i.MX31, i.MX35, i.MX51 and the i.MX53.

The IIM can control up to 8 fuse banks with 256 bit each. Not all of the
banks are equipped on the different SoCs. The actual number of fuses
differ from 512 on the i.MX27 and 1152 on the i.MX53.

The fuses are one time writable, but writing is currently not supported
in the driver.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Richard Leitner 4cefb74ada nvmem: imx-ocotp: fix usage of "dev" pointers
Assign the correct dev pointer to struct ocotp_priv during probe. This
is needed to display dev_* messages correctly. Furthermore harmonize
the usage of dev (instead of &pdev->dev) in the probe function.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Icenowy Zheng 1a9636426b nvmem: sunxi-sid: add support for H3's SID controller
The H3 SoC have a bigger SID controller, which has its direct read
address at 0x200 position in the SID block, not 0x0.

Also, H3 SID controller has some silicon bug that makes the direct read
value wrong at cold boot, add code to workaround the bug. (This bug has
already been fixed on A64 and later SoCs)

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Icenowy Zheng 4a72cda530 nvmem: sunxi-sid: read NVMEM size from device compatible
Sometimes the SID device have more memory address space than the real
NVMEM size (for the registers used to read/write the SID).

Fetch the NVMEM size from device compatible, rather than the memory
address space's length, in order to prepare for adding some
registers-based read support.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Aban Bedel 5253193d54 nvmem: core: Allow allocating several anonymous nvmem devices
Currently the nvmem core expect the config to provide a name and ID
that are then used to create the device name. When no device name is
given 'nvmem' is used. However if there is several such anonymous
devices they all get named 'nvmem0', which doesn't work.

To fix this problem use the ID from the config only when the config
also provides a name. When no name is provided take the uinque ID of
the nvmem device instead.

Signed-off-by: Aban Bedel <albeu@free.fr>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 17:51:48 +02:00
Carlo Caione 83e007a0c6 firmware: meson-sm: Check for buffer output size
After the data is read by the secure monitor driver it is being copied
in the output buffer checking only the size of the bounce buffer but not
the size of the output buffer.

Fix this in the secure monitor driver slightly changing the API. Fix
also the efuse driver that it is the only driver using this API to not
break bisectability.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # for nvmem
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-23 12:22:32 -07:00
Vivek Gautam fd0c478c0d nvmem: core: Allow getting nvmem cell with a NULL cell id
The nvmem cell with a NULL cell name/id should be the one
with no accompanying 'nvmem-cell-names' property, and thus
will be the cell at index 0 in the device tree.
So, we default to index 0 and update the cell index only when
nvmem cell name id exists.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:49:39 +01:00
Vivek Gautam 29143268ec nvmem: core: Correct a bunch of function documentations
Correct the documentation for arguments to a number
of functions.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:49:39 +01:00
Vivek Gautam 3b4a687726 nvmem: core: Allow ignoring length when reading a cell
nvmem_cell_read() API fills in the argument 'len' with
the number of bytes read from the cell. Many users don't
care about this length value. So allow users to pass a
NULL pointer to this len field.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:49:39 +01:00
Bai Ping 4aa2b48020 nvmem: octop: Add support for imx6ul
i.MX6UL is an new SOC of i.MX6 family. Enable ocotp
driver support for this SOC.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:49:39 +01:00