Commit Graph

9766 Commits

Author SHA1 Message Date
Linus Torvalds c9d6329c35 Merge branch 'for-next' of git://git.linaro.org/people/triad/linux-pinctrl
* 'for-next' of git://git.linaro.org/people/triad/linux-pinctrl:
  pinctrl/sirf: fix sirfsoc_get_group_pins prototype
  pinctrl: Don't copy function name when requesting a pin
  pinctrl: Don't copy pin names when registering them
  pinctrl: Remove unsafe __refdata
  pinctrl: get_group_pins() const fixes
  pinctrl: add a driver for the CSR SiRFprimaII pinmux
  pinctrl: add a driver for the U300 pinmux
  drivers: create a pin control subsystem
2011-10-25 14:04:01 +02:00
Linus Torvalds 8a9ea3237e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.
2011-10-25 13:25:22 +02:00
Linus Torvalds 1be025d3cb Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...
2011-10-25 12:23:15 +02:00
Linus Torvalds 2d03423b23 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  mm: memory hotplug: Check if pages are correctly reserved on a per-section basis
  Revert "memory hotplug: Correct page reservation checking"
  Update email address for stable patch submission
  dynamic_debug: fix undefined reference to `__netdev_printk'
  dynamic_debug: use a single printk() to emit messages
  dynamic_debug: remove num_enabled accounting
  dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions
  uio: Support physical addresses >32 bits on 32-bit systems
  sysfs: add unsigned long cast to prevent compile warning
  drivers: base: print rejected matches with DEBUG_DRIVER
  memory hotplug: Correct page reservation checking
  memory hotplug: Refuse to add unaligned memory regions
  remove the messy code file Documentation/zh_CN/SubmitChecklist
  ARM: mxc: convert device creation to use platform_device_register_full
  new helper to create platform devices with dma mask
  docs/driver-model: Update device class docs
  docs/driver-model: Document device.groups
  kobj_uevent: Ignore if some listeners cannot handle message
  dynamic_debug: make netif_dbg() call __netdev_printk()
  dynamic_debug: make netdev_dbg() call __netdev_printk()
  ...
2011-10-25 12:13:59 +02:00
Linus Torvalds 59e5253417 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...
2011-10-25 12:11:02 +02:00
Linus Torvalds 31dced41c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (61 commits)
  HID: hid-magicmouse: Magic Trackpad has 1 button, not 2
  HID: Add device IDs for more SJOY adapters
  HID: primax: remove spurious dependency
  HID: support primax keyboards violating USB HID spec
  HID: usbhid: cancel timer for retry synchronously
  HID: wacom: Set input bits before registration
  HID: consolidate MacbookAir 4,1 mappings
  HID: MacbookAir4,1 and MacbookAir4,2 need entry in hid_mouse_ignore_list[]
  HID: Add support MacbookAir 4,1 keyboard
  HID: hidraw: open count should not increase if error
  HID: hiddev: potential info leak in hiddev_ioctl()
  HID: multitouch: decide if hid-multitouch needs to handle mt devices
  HID: add autodetection of multitouch devices
  HID: "hid-logitech" driver with Logitech Driving Force GT
  HID: hid-logitech-dj: fix off by one
  HID: hidraw: protect hidraw_disconnect() better
  HID: hid-multitouch: add support for the IDEACOM 6650 chip
  HID: Add full support for Logitech Unifying receivers
  HID: hidraw: free list for all error in hidraw_open
  HID: roccat: Kone now reports external profile changes via roccat device
  ...
2011-10-25 12:03:13 +02:00
Linus Torvalds 1bc67188c3 Merge branch 'for-linus' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'for-linus' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (81 commits)
  ARM: 7133/1: SMP: fix per cpu timer setup before the cpu is marked online
  ARM: 7129/1: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
  ARM: 7136/1: pl330: Fix a race condition
  ARM: smp: fix clipping of number of CPUs
  ARM: 7137/1: Fix error upon adding LL debug
  ARM: Add a few machine types to mach-types
  ARM: 7130/1: dev_archdata: add private iommu extension
  ARM: 7125/1: Add unwinding annotations for 64bit division functions
  ARM: 7120/1: remove bashism in check for multiple zreladdrs
  ARM: 7118/1: rename temp variable in read*_relaxed()
  ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_rom
  ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage
  ARM: 7062/1: cache: detect PIPT I-cache using CTR
  ARM: platform fixups: remove mdesc argument to fixup function
  ARM: 7017/1: Use generic BUG() handler
  ARM: 7102/1: mach-integrator: update defconfig
  ARM: 7087/2: mach-integrator: get timer frequency from clock
  ARM: 7086/2: mach-integrator: modernize clock event registration
  ARM: 7085/2: mach-integrator: clockevent supports oneshot mode
  ARM: 7084/1: mach-integrator: retire some timer macros
  ...
2011-10-25 10:18:27 +02:00
Jiri Kosina b0eae38ceb Merge branches 'acrux', 'logitech', 'multitouch', 'roccat' and 'wiimote' into for-linus 2011-10-25 09:54:16 +02:00
Linus Torvalds 36b8d186e6 Merge branch 'next' of git://selinuxproject.org/~jmorris/linux-security
* 'next' of git://selinuxproject.org/~jmorris/linux-security: (95 commits)
  TOMOYO: Fix incomplete read after seek.
  Smack: allow to access /smack/access as normal user
  TOMOYO: Fix unused kernel config option.
  Smack: fix: invalid length set for the result of /smack/access
  Smack: compilation fix
  Smack: fix for /smack/access output, use string instead of byte
  Smack: domain transition protections (v3)
  Smack: Provide information for UDS getsockopt(SO_PEERCRED)
  Smack: Clean up comments
  Smack: Repair processing of fcntl
  Smack: Rule list lookup performance
  Smack: check permissions from user space (v2)
  TOMOYO: Fix quota and garbage collector.
  TOMOYO: Remove redundant tasklist_lock.
  TOMOYO: Fix domain transition failure warning.
  TOMOYO: Remove tomoyo_policy_memory_lock spinlock.
  TOMOYO: Simplify garbage collector.
  TOMOYO: Fix make namespacecheck warnings.
  target: check hex2bin result
  encrypted-keys: check hex2bin result
  ...
2011-10-25 09:45:31 +02:00
Russell King 06afb1a087 Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', 'p2v', 'pgt' (early part) and 'smp' into for-linus 2011-10-25 08:19:29 +01:00
David S. Miller 1805b2f048 Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/net 2011-10-24 18:18:09 -04:00
Grant Likely 2b0fce8da2 Devicetree: Expand on ARM Primecell binding documentation
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-24 23:48:01 +02:00
Jean Delvare 426343ef34 hwmon: (lm75) Document why clones are not detected
Explain why clones of the LM75 are generally not detected by the
driver, and why this isn't going to change. Also update the
documentation to reflect the list of chip names currently supported by
the driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:47 -07:00
Michael Hennerich e96f9d89e6 hwmon: (lm75) Add support for Analog Devices ADT75
Add datasheet reference and device ID for ADT75.

The ADT75, like some other LM75 derivatives, needs to be instantiated
using methods 1, 2, or 4.
For more information see Documentation/i2c/instantiating-devices.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:45 -07:00
Guenter Roeck bc365a7f3c hwmon: (pmbus) Add support for Lineage Power DC-DC converters
Add device IDs and reference to datasheets for Lineage Power DC-DC converters.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:44 -07:00
Guenter Roeck ddfb41ca2a hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver
The LTC3880 PMBus command set is comparable to LTC2978. Add support for it
to the LTC2978 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:43 -07:00
Guenter Roeck c3ff9a674c hwmon: (pmbus/ltc2978) Explicit driver for LTC2978
Provide explicit driver for LTC2978 to enable support for minimum and peak
attributes. Remove ltc2978 chip id from generic pmbus driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:42 -07:00
Jonathan Cameron 4f3a659581 hwmon: AD7314 driver (ported from IIO)
Driver for AD7314, ADT7301, and ADT7302, ported from IIO.

Currently dropped power down mode support.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
[guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:41 -07:00
Guenter Roeck 200855e52d hwmon: (pmbus) Add support for Intersil power management chips
Add support for Intersil / Zilker Labs ZL2004, ZL2006, ZL2008, ZL2105, ZL2106,
ZL6100, and ZL6105.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:40 -07:00
Guenter Roeck ced29d4225 hwmon: (pmbus) Provide more documentation
Provide more documentation describing PMBus driver functionality and the API
between the PMBus core driver and PMBus chip drivers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:38 -07:00
Donggeun Kim 9d97e5c81e hwmon: Add driver for EXYNOS4 TMU
This patch allows to read temperature
from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:35 -07:00
Guenter Roeck 5cf231a346 hwmon: (pmbus/adm1275) Add support for ADM1276
ADM1276 is mostly compatible to ADM1275, with added support for input power
measurement. Add support for it to the ADM1275 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-10-24 11:09:35 -07:00
Guenter Roeck c5e6763667 hwmon: (pmbus/adm1275) Add support for second current limit
ADM1275 supports a second current limit, which can be configured as either lower
or upper limit. Add support for it and report it as either lower or upper
critical current limit.

Also replace error return code EINVAL for unsupported pages with ENXIO as this
is more appropriate for the observed condition.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-10-24 11:09:34 -07:00
Nicolae Mogoreanu 14211d026d 9p: fix 9p.txt to advertise msize instead of maxdata
9p.txt advertises that maxdata mount option should be used to specify
msize, in the code though we use msize option and completely ignore
maxdata if passed

Signed-off-by: Nicolae Mogoreanu <mogoreanu@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:12 -05:00
Grant Likely 2bf6f675fa Merge commit 'v3.1' into devicetree/next 2011-10-24 17:03:35 +02:00
Ike Panhc 349d594be4 ideapad: remove sysfs node for cfg
Replaced by the one in debugfs.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-10-24 16:52:39 +02:00
Ike Panhc 773e3206e6 ideapad: add debugfs support
Add two nodes in debugfs which shows cfg value and its meaning,
and status info read from VPC2004.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-10-24 16:52:39 +02:00
Srivatsa S. Bhat 7fef9fc83f PM / Documentation: Update docs about suspend and CPU hotplug
Update the documentation about the interaction between the suspend (S3) call
path and the CPU hotplug infrastructure.
This patch focusses only on the activities of the freezer, cpu hotplug and
the notifications involved. It outlines how regular CPU hotplug differs from
the way it is invoked during suspend and also tries to explain the locking
involved. In addition to that, it discusses the issue of microcode update
during CPU hotplug operations.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-22 00:22:28 +02:00
Giuseppe CAVALLARO 51e3137b9b stmmac: update the driver version and doc (V4)
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 19:24:16 -04:00
Nicolas Ferre 0331bbf3c6 tty/serial: RS485 bindings for device tree
Generic bindings for RS485 feature included in some UARTs.
Those bindings have to be used withing an UART device tree node.
Documentation updated to link to the bindings definition.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18 16:40:33 -07:00
Josh Boyer 5fa224295f Update email address for stable patch submission
The stable@kernel.org email address has been replaced with the
stable@vger.kernel.org mailing list.  Change the stable kernel rules to
reference the new list instead of the semi-defunct email alias.

CC: <stable@kernel.org>
CC: <stable@vger.kernel.org>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18 13:58:59 -07:00
Kai Jiang 27a90700a4 uio: Support physical addresses >32 bits on 32-bit systems
To support >32-bit physical addresses for UIO_MEM_PHYS type we need to
extend the width of 'addr' in struct uio_mem.  Numerous platforms like
embedded PPC, ARM, and X86 have support for systems with larger physical
address than logical.

Since 'addr' may contain a physical, logical, or virtual address the
easiest solution is to just change the type to 'phys_addr_t' which
should always be greater than or equal to the sizeof(void *) such that
it can properly hold any of the address types.

For physical address we can support up to a 44-bit physical address on a
typical 32-bit system as we utilize remap_pfn_range() for the mapping of
the memory region and pfn's are represnted by shifting the address by
the page size (typically 4k).

Signed-off-by: Kai Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18 11:18:57 -07:00
Shawn Guo 9daaf31a8c arm/mx5: add device tree support for imx51 babbage
It adds device tree support for imx51 babbage board.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-18 12:43:19 +02:00
Shawn Guo 73d2b4cdfc arm/mx5: add device tree support for imx53 boards
It adds device tree support for imx53 boards.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-18 12:42:57 +02:00
John W. Linville 41ebe9cde7 Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davem 2011-10-17 15:05:26 -04:00
Mark Rutland 8d4e652d1b ARM: 7023/1: L2x0: Add interrupts property to OF binding
Following the discussion here:
http://lists.ozlabs.org/pipermail/devicetree-discuss/2011-August/007301.html

The L2x0 L2 Cache Controllers support a combined interrupt line
which can be used for several events (e.g. read/write/parity errors on
tag/data RAM, event counter increment/overflow). Unfortunately the
OF binding added in c519ecf2 ("ARM: 7009/1: l2x0: Add OF based
initialization") does not represent the interrupt.

This patch adds an "interrupts" property to the L2x0 OF binding,
representing the combined interrupt line.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17 09:11:44 +01:00
Rob Herring 8c369264b6 ARM: 7009/1: l2x0: Add OF based initialization
This adds probing for ARM L2x0 cache controllers via device tree. Support
includes the L210, L220, and PL310 controllers. The binding allows setting
up cache RAM latencies and filter addresses (PL310 only).

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17 09:11:30 +01:00
Barry Song f126f7334f PM / Hibernate: Add resumedelay kernel param in addition to resumewait
Patch "PM / Hibernate: Add resumewait param to support MMC-like
devices as resume file" added the resumewait kernel command line
option.  The present patch adds resumedelay so that
resumewait/delay were analogous to rootwait/delay.

[rjw: Modified the subject and changelog slightly.]

Signed-off-by: Barry Song <baohua.song@csr.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:30:37 +02:00
Barry Song 6f8d7022a8 PM / Hibernate: Add resumewait param to support MMC-like devices as resume file
Some devices like MMC are async detected very slow. For example,
drivers/mmc/host/sdhci.c launches a 200ms delayed work to detect
MMC partitions then add disk.

We have wait_for_device_probe() and scsi_complete_async_scans()
before calling swsusp_check(), but it is not enough to wait for MMC.

This patch adds resumewait kernel param just like rootwait so
that we have enough time to wait until MMC is ready. The difference is
that we wait for resume partition whereas rootwait waits for rootfs
partition (which may be on a different device).

This patch will make hibernation support many embedded products
without SCSI devices, but with devices like MMC.

[rjw: Modified the changelog slightly.]

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:30:36 +02:00
Rafael J. Wysocki 2aede851dd PM / Hibernate: Freeze kernel threads after preallocating memory
There is a problem with the current ordering of hibernate code which
leads to deadlocks in some filesystems' memory shrinkers.  Namely,
some filesystems use freezable kernel threads that are inactive when
the hibernate memory preallocation is carried out.  Those same
filesystems use memory shrinkers that may be triggered by the
hibernate memory preallocation.  If those memory shrinkers wait for
the frozen kernel threads, the hibernate process deadlocks (this
happens with XFS, for one example).

Apparently, it is not technically viable to redesign the filesystems
in question to avoid the situation described above, so the only
possible solution of this issue is to defer the freezing of kernel
threads until the hibernate memory preallocation is done, which is
implemented by this change.

Unfortunately, this requires the memory preallocation to be done
before the "prepare" stage of device freeze, so after this change the
only way drivers can allocate additional memory for their freeze
routines in a clean way is to use PM notifiers.

Reported-by: Christoph <cr2005@u-club.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:28:52 +02:00
Alan Stern 8f88893c05 PM: Update the policy on default wakeup settings
This patch (as1485) documents a change to the kernel's default wakeup
policy.  Devices that forward wakeup requests between buses should be
enabled for wakeup by default.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:28:51 +02:00
ShuoX Liu 2a77c46de1 PM / Suspend: Add statistics debugfs file for suspend to RAM
Record S3 failure time about each reason and the latest two failed
devices' names in S3 progress.
We can check it through 'suspend_stats' entry in debugfs.

The motivation of the patch:

We are enabling power features on Medfield. Comparing with PC/notebook,
a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far
more frequently. If it can't enter suspend-2-ram in time, the power
might be used up soon.

We often find sometimes, a device suspend fails. Then, system retries
s3 over and over again. As display is off, testers and developers
don't know what happens.

Some testers and developers complain they don't know if system
tries suspend-2-ram, and what device fails to suspend. They need
such info for a quick check. The patch adds suspend_stats under
debugfs for users to check suspend to RAM statistics quickly.

If not using this patch, we have other methods to get info about
what device fails. One is to turn on  CONFIG_PM_DEBUG, but users
would get too much info and testers need recompile the system.

In addition, dynamic debug is another good tool to dump debug info.
But it still doesn't match our utilization scenario closely.
1) user need write a user space parser to process the syslog output;
2) Our testing scenario is we leave the mobile for at least hours.
   Then, check its status. No serial console available during the
   testing. One is because console would be suspended, and the other
   is serial console connecting with spi or HSU devices would consume
   power. These devices are powered off at suspend-2-ram.

Signed-off-by: ShuoX Liu <shuox.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:27:45 +02:00
Rafael J. Wysocki 9bd717c0dc Merge branch 'pm-runtime' into pm-for-linus
* pm-runtime:
  PM / Runtime: Handle .runtime_suspend() failure correctly
  PM / Runtime: Fix kerneldoc comment for rpm_suspend()
  PM / Runtime: Update document about callbacks
2011-10-16 23:26:49 +02:00
adam radford 8d6f5cea12 [SCSI] megaraid_sas: Changelog and version update
The following patch for megaraid_sas updates the
ChangeLog.megaraid_sas file and updates the driver version.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16 11:27:02 -05:00
Vikas Chaudhary aecc3130da [SCSI] qla4xxx: Update license
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16 11:07:30 -05:00
Florian Tobias Schandinat 07aaae44f5 Merge commit 'v3.1-rc9' into fbdev-next 2011-10-15 00:14:01 +00:00
Renzo Dani 873c07da6a [media] update az6027 firmware URL
Signed-off-by: Renzo Dani <arons7@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-14 10:29:45 -03:00
Timur Tabi 2bcd1c0cfc powerpc/fsl_msi: add support for "msi-address-64" property
Add support for the msi-address-64 property of a PCI node.  This property
specifies the PCI address of MSIIR (message signaled interrupt index
register).

In commit 3da34aae ("powerpc/fsl: Support unique MSI addresses per PCIe Root
Complex"), the msi_addr_hi/msi_addr_lo fields of struct fsl_msi were redefined
from an actual address to just an offset, but the fields were not renamed
accordingly.  These fields are replace with a single field, msiir_offset,
to reflect the new meaning.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-14 02:54:29 -05:00
Linus Walleij 2744e8afb3 drivers: create a pin control subsystem
This creates a subsystem for handling of pin control devices.
These are devices that control different aspects of package
pins.

Currently it handles pinmuxing, i.e. assigning electronic
functions to groups of pins on primarily PGA and BGA type of
chip packages which are common in embedded systems.

The plan is to also handle other I/O pin control aspects
such as biasing, driving, input properties such as
schmitt-triggering, load capacitance etc within this
subsystem, to remove a lot of ARM arch code as well as
feature-creepy GPIO drivers which are implementing the same
thing over and over again.

This is being done to depopulate the arch/arm/* directory
of such custom drivers and try to abstract the infrastructure
they all need. See the Documentation/pinctrl.txt file that is
part of this patch for more details.

ChangeLog v1->v2:

- Various minor fixes from Joe's and Stephens review comments
- Added a pinmux_config() that can invoke custom configuration
  with arbitrary data passed in or out to/from the pinmux driver

ChangeLog v2->v3:

- Renamed subsystem folder to "pinctrl" since we will likely
  want to keep other pin control such as biasing in this
  subsystem too, so let us keep to something generic even though
  we're mainly doing pinmux now.
- As a consequence, register pins as an abstract entity separate
  from the pinmux. The muxing functions will claim pins out of the
  pin pool and make sure they do not collide. Pins can now be
  named by the pinctrl core.
- Converted the pin lookup from a static array into a radix tree,
  I agreed with Grant Likely to try to avoid any static allocation
  (which is crap for device tree stuff) so I just rewrote this
  to be dynamic, just like irq number descriptors. The
  platform-wide definition of number of pins goes away - this is
  now just the sum total of the pins registered to the subsystem.
- Make sure mappings with only a function name and no device
  works properly.

ChangeLog v3->v4:

- Define a number space per controller instead of globally,
  Stephen and Grant requested the same thing so now maps need to
  define target controller, and the radix tree of pin descriptors
  is a property on each pin controller device.
- Add a compulsory pinctrl device entry to the pinctrl mapping
  table. This must match the pinctrl device, like "pinctrl.0"
- Split the file core.c in two: core.c and pinmux.c where the
  latter carry all pinmux stuff, the core is for generic pin
  control, and use local headers to access functionality between
  files. It is now possible to implement a "blank" pin controller
  without pinmux capabilities. This split will make new additions
  like pindrive.c, pinbias.c etc possible for combined drivers
  and chunks of functionality which is a GoodThing(TM).
- Rewrite the interaction with the GPIO subsystem - the pin
  controller descriptor now handles this by defining an offset
  into the GPIO numberspace for its handled pin range. This is
  used to look up the apropriate pin controller for a GPIO pin.
  Then that specific GPIO range is matched 1-1 for the target
  controller instance.
- Fixed a number of review comments from Joe Perches.
- Broke out a header file pinctrl.h for the core pin handling
  stuff that will be reused by other stuff than pinmux.
- Fixed some erroneous EXPORT() stuff.
- Remove mispatched U300 Kconfig and Makefile entries
- Fixed a number of review comments from Stephen Warren, not all
  of them - still WIP. But I think the new mapping that will
  specify which function goes to which pin mux controller address
  50% of your concerns (else beat me up).

ChangeLog v4->v5:

- Defined a "position" for each function, so the pin controller now
  tracks a function in a certain position, and the pinmux maps define
  what position you want the function in. (Feedback from Stephen
  Warren and Sascha Hauer).
- Since we now need to request a combined function+position from
  the machine mapping table that connect mux settings to drivers,
  it was extended with a position field and a name field. The
  name field is now used if you e.g. need to switch between two
  mux map settings at runtime.
- Switched from a class device to using struct bus_type for this
  subsystem. Verified sysfs functionality: seems to work fine.
  (Feedback from Arnd Bergmann and Greg Kroah-Hartman)
- Define a per pincontroller list of GPIO ranges from the GPIO
  pin space that can be handled by the pin controller. These can
  be added one by one at runtime. (Feedback from Barry Song)
- Expanded documentation of regulator_[get|enable|disable|put]
  semantics.
- Fixed a number of review comments from Barry Song. (Thanks!)

ChangeLog v5->v6:

- Create an abstract pin group concept that can sort pins into
  named and enumerated groups no matter what the use of these
  groups may be, one possible usecase is a group of pins being
  muxed in or so. The intention is however to also use these
  groups for other pin control activities.
- Make it compulsory for pinmux functions to associate with
  at least one group, so the abstract pin group concept is used
  to define the groups of pins affected by a pinmux function.
  The pinmux driver interface has been altered so as to enforce
  a function to list applicable groups per function.
- Provide an optional .group entry in the pinmux machine map
  so the map can select beteween different available groups
  to be used with a certain function.
- Consequent changes all over the place so that e.g. debugfs
  present reasonable information about the world.
- Drop the per-pin mux (*config) function in the pinmux_ops
  struct - I was afraid that this would start to be used for
  things totally unrelated to muxing, we can introduce that to
  the generic struct pinctrl_ops if needed. I want to keep
  muxing orthogonal to other pin control subjects and not mix
  these things up.

ChangeLog v6->v7:

- Make it possible to have several map entries matching the
  same device, pin controller and function, but using
  a different group, and alter the semantics so that
  pinmux_get() will pick all matching map entries, and
  store the associated groups in a list. The list will
  then be iterated over at pinmux_enable()/pinmux_disable()
  and corresponding driver functions called for each
  defined group. Notice that you're only allowed to map
  multiple *groups* to the same
  { device, pin controller, function } triplet, attempts
  to map the same device to multiple pin controllers will
  for example fail. This is hopefully the crucial feature
  requested by Stephen Warren.
- Add a pinmux hogging field to the pinmux mapping entries,
  and enable the pinmux core to hog pinmux map entries.
  This currently only works for pinmuxes without assigned
  devices as it looks now, but with device trees we can
  look up the corresponding struct device * entries when
  we register the pinmux driver, and have it hog each
  pinmux map in turn, for a simple approach to
  non-dynamic pin muxing. This addresses an issue from
  Grant Likely that the machine should take care of as
  much of the pinmux setup as possible, not the devices.
  By supplying a list of hogs, it can now instruct the
  core to take care of any static mappings.
- Switch pinmux group retrieveal function to grab an
  array of strings representing the groups rather than an
  array of unsigned and rewrite accordingly.
- Alter debugfs to show the grouplist handled by each
  pinmux. Also add a list of hogs.
- Dynamically allocate a struct pinmux at pinmux_get() and
  free it at pinmux_put(), then add these to the global
  list of pinmuxes active as we go along.
- Go over the list of pinmux maps at pinmux_get() time
  and repeatedly apply matches.
- Retrieve applicable groups per function from the driver
  as a string array rather than a unsigned array, then
  lookup the enumerators.
- Make the device to pinmux map a singleton - only allow the
  mapping table to be registered once and even tag the
  registration function with __init so it surely won't be
  abused.
- Create a separate debugfs file to view the pinmux map at
  runtime.
- Introduce a spin lock to the pin descriptor struct, lock it
  when modifying pin status entries. Reported by Stijn Devriendt.
- Fix up the documentation after review from Stephen Warren.
- Let the GPIO ranges give names as const char * instead of some
  fixed-length string.
- add a function to unregister GPIO ranges to mirror the
  registration function.
- Privatized the struct pinctrl_device and removed it from the
  <linux/pinctrl/pinctrl.h> API, the drivers do not need to know
  the members of this struct. It is now in the local header
  "core.h".
- Rename the concept of "anonymous" mux maps to "system" muxes
  and add convenience macros and documentation.

ChangeLog v7->v8:

- Delete the leftover pinmux_config() function from the
 <linux/pinctrl/pinmux.h> header.
- Fix a race condition found by Stijn Devriendt in pin_request()

ChangeLog v8->v9:

- Drop the bus_type and the sysfs attributes and all, we're not on
  the clear about how this should be used for e.g. userspace
  interfaces so let us save this for the future.
- Use the right name in MAINTAINERS, PIN CONTROL rather than
  PINMUX
- Don't kfree() the device state holder, let the .remove() callback
  handle this.
- Fix up numerous kerneldoc headers to have one line for the function
  description and more verbose documentation below the parameters

ChangeLog v9->v10:
- pinctrl: EXPORT_SYMBOL needs export.h, folded in a patch
  from Steven Rothwell
- fix pinctrl_register error handling, folded in a patch from
  Axel Lin
- Various fixes to documentation text so that it's consistent.
- Removed pointless comment from drivers/Kconfig
- Removed dependency on SYSFS since we removed the bus in
  v9.
- Renamed hopelessly abbreviated pctldev_* functions to the
  more verbose pinctrl_dev_*
- Drop mutex properly when looking up GPIO ranges
- Return NULL instead of ERR_PTR() errors on registration of
  pin controllers, using cast pointers is fragile. We can
  live without the detailed error codes for sure.

Cc: Stijn Devriendt <highguy@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-13 12:49:17 +02:00
Stephen George b9df022319 powerpc/85xx: Adding DCSR node to dtsi device trees
Adding new device tree binding file for the DCSR node.  Modifying device
tree dtsi files to add DCSR node for P2041, P3041, P4080, & P5020.

Signed-off-by: Stephen George <stephen.george@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11 23:47:29 -05:00
Timur Tabi 499ccb27a8 powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
Standarize and document the FPGA nodes used on Freescale QorIQ reference
boards.  There are different kinds of FPGAs used on the boards, but
only two are currently standard: "pixis", "ngpixis", and "qixis".  Although
there are minor differences among the boards that have one kind of FPGA, most
of the functionality is the same, so it makes sense to create common
compatibility strings.

We also need to update the P1022DS platform file, because the compatible
string for its PIXIS node has changed.  This means that older kernels are
not compatible with newer device trees.  This is not a real problem, however,
since that particular function doesn't work anyway.  When the DIU is active,
the PIXIS is in "indirect mode", and so cannot be accessed as a memory-mapped
device.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11 23:47:24 -05:00
Stephen Warren f62f548c1c arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Add a pinmux node to tegra20.dtsi in order to instantiate the future
pinmux device.

v2: Specify reg property precisely; don't just point at the whole APB_MISC
register range.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-11 17:19:56 -07:00
Helmut Schaa d9cd48f95c mac80211: Update injection documentation
Add documentation about NOACK tx flag usage.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11 16:41:16 -04:00
John W. Linville 094daf7db7 Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davem
Conflicts:
	Documentation/feature-removal-schedule.txt
2011-10-11 15:35:42 -04:00
Adrian Bunk 2b666859ec x86: Default to vsyscall=native for now
This UML breakage:

  linux-2.6.30.1[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790
  linux-2.6.30.1[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790

Is caused by commit 3ae36655 ("x86-64: Rework vsyscall emulation and add
vsyscall= parameter") - the vsyscall emulation code is not fully cooked
yet as UML relies on some rather fragile SIGSEGV semantics.

Linus suggested in https://lkml.org/lkml/2011/8/9/376 to default
to vsyscall=native for now, this patch implements that.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Andrew Lutomirski <luto@mit.edu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/20111005214047.GE14406@localhost.pp.htv.fi
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-11 08:23:34 +02:00
Ming Lei 2fb242adca PM / Runtime: Update document about callbacks
Support for device power domains has been introduced in
commit 9659cc0678 (PM: Make
system-wide PM and runtime PM treat subsystems consistently),
also power domain callbacks will take precedence over subsystem ones
from commit 4d27e9dcff00a6425d779b065ec8892e4f391661(PM: Make
power domain callbacks take precedence over subsystem ones).

So update part of "Device Runtime PM Callbacks" in
Documentation/power/runtime_pm.txt.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-10 23:37:23 +02:00
Lukas Czerner 4113c4caa4 ext4: remove deprecated oldalloc
For a long time now orlov is the default block allocator in the
ext4. It performs better than the old one and no one seems to claim
otherwise so we can safely drop it and make oldalloc and orlov mount
option deprecated.

This is a part of the effort to reduce number of ext4 options hence the
test matrix.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-08 14:34:47 -04:00
Theodore Ts'o af909a57fd ext4: documentation: remove acl and user_xattr mount options
Acl and user_xattr mount options are no longer needed since those
features are enabled by default if configured in (seee commit
ea66333694). We can not easily deprecate
mount options itself (since it is probably too early), but we can
remove it from documentation first.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-08 14:01:08 -04:00
Rafael J. Wysocki 7811ac276b Merge branch 'pm-devfreq' into pm-for-linus
* pm-devfreq:
  PM / devfreq: Add basic governors
  PM / devfreq: Add common sysfs interfaces
  PM: Introduce devfreq: generic DVFS framework with device-specific OPPs
  PM / OPP: Add OPP availability change notifier.
2011-10-07 23:17:18 +02:00
Rafael J. Wysocki 9696cc9007 Merge branch 'pm-qos' into pm-for-linus
* pm-qos:
  PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks
  PM / QoS: Add function dev_pm_qos_read_value() (v3)
  PM QoS: Add global notification mechanism for device constraints
  PM QoS: Implement per-device PM QoS constraints
  PM QoS: Generalize and export constraints management code
  PM QoS: Reorganize data structs
  PM QoS: Code reorganization
  PM QoS: Minor clean-ups
  PM QoS: Move and rename the implementation files
2011-10-07 23:17:07 +02:00
Rafael J. Wysocki d727b60659 Merge branch 'pm-runtime' into pm-for-linus
* pm-runtime:
  PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
  PM / Runtime: Replace dev_dbg() with trace_rpm_*()
  PM / Runtime: Introduce trace points for tracing rpm_* functions
  PM / Runtime: Don't run callbacks under lock for power.irq_safe set
  USB: Add wakeup info to debugging messages
  PM / Runtime: pm_runtime_idle() can be called in atomic context
  PM / Runtime: Add macro to test for runtime PM events
  PM / Runtime: Add might_sleep() to runtime PM functions
2011-10-07 23:16:55 +02:00
David S. Miller 88c5100c28 Merge branch 'master' of github.com:davem330/net
Conflicts:
	net/batman-adv/soft-interface.c
2011-10-07 13:38:43 -04:00
Mark Brown c3035a232e regulator: Clarify documentation for regulator-regulator supplies
The mechanism used for connecting regulators together when one regulator
supplies another wasn't clear as the names being used weren't really tied
together well.

Reported-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07 11:24:14 +01:00
Mark Brown 2c1ba398ac regulator: Fix some bitrot in the machine driver documentation
The documentation for the machine driver was rather badly bitrotted,
using pointers to struct device rather than dev_name() to hook up the
consumers. Update to use dev_name().

Reported-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07 11:24:07 +01:00
Benjamin Poirier 186c6bbced net: fix typos in Documentation/networking/scaling.txt
The second hunk fixes rps_sock_flow_table but has to re-wrap the paragraph.

Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06 15:58:24 -04:00
Ingo Molnar 9243a169ac Merge commit 'v3.1-rc9' into sched/core
Merge reason: pick up latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-06 12:43:35 +02:00
Grant Likely 9514a56753 Merge branch 'for-grant' of git://git.jdl.com/software/linux-3.0 into devicetree/next 2011-10-05 10:52:27 -06:00
Rob Herring 6add6967a4 devicetree: Add ARM pl022 spi controller binding doc
Add binding documentation for ARM's Primecell PL022 SPI controller.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-05 07:39:56 -05:00
Rob Herring f614c74f94 devicetree: Add ARM pl061 gpio controller binding doc
Add binding documentation for ARM's Primecell PL061 GPIO controller.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-05 07:39:56 -05:00
Ping Cheng 09e7d94107 Input: wacom - add LED support for Cintiq 21ux2
Cintiq 21ux2 has two sets of four LEDs on right and left side of
the tablet, respectively.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:21 -07:00
Ping Cheng 77e82516a6 Input: wacom - don't expose LED inactive option
The LED also indicates the status of the tablet. Don't turn it off.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:17 -07:00
Ping Cheng f4fa9a6d80 Input: wacom - lower the LED luminance
The LED luminance level is normally lower when no button is pressed.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:00 -07:00
Benoit Cousson 476b679a5d arm/dts: OMAP3+: Add mpu, dsp and iva nodes
Add nodes for devices used by PM code (mpu, dsp, iva).

Add a cpus node as well as recommended in the DT spec.

Remove mpu, dsp, iva devices init if is populated.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Kevin Hilman <khilman@ti.com>
2011-10-04 22:29:40 +02:00
Benoit Cousson d039c5b9fb ARM: OMAP2+: l3-noc: Add support for device-tree
Add device-tree support for the l3-noc driver.

Use platform_driver_register to defer the probing at device init
time.

Add documentation for the l3-noc bindings.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-10-04 22:29:38 +02:00
Jean Pihet e3cba3243e PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks
Update the documentation for the recently updated pm_qos API, kernel
and user space.  Add documentation for the per-device PM QoS
(dev_pm_qos) framework API.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-04 21:54:45 +02:00
Felipe Balbi 879631aa65 usb: dwc3: gadget: implement streams support
The following patch adds support for streams
to dwc3 driver.

While at that, also fix one small issue on
endpoint disable where we should clear all
flags not only ENABLED.

Reviewied-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-04 10:25:54 -07:00
Benoit Cousson dc2d07ebae ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node
Add a notifier called during device_add phase. If an of_node is present,
retrieve the hwmod entry in order to populate properly the omap_device
structure.

For the moment the resource from the device-tree are overloaded.
DT does not support named resource yet, and thus, most driver will not
work without that information.

Add a documentation to capture the specifics OMAP bindings needed for
device-tree support.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04 09:52:23 -07:00
Ingo Molnar 22f92bacbe Merge branch 'linus' into sched/core
Merge reason: pick up the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-04 11:09:08 +02:00
Raymond Yau ce662bb205 ALSA: hda - Add documentation for codec specific mixer controls of Analog codecs
* Channel Mode
  This is an enum control to change the surround-channel setup,
  appears only when the surround channels are available.
  It gives the number of channels to be used, "2ch", "4ch" abd "6ch".
  According to the configuration, this also controls the
  jack-retasking of multi-I/O jacks.

* Independent HP
  When this enum control is enabled, the headphone output is routed
  from an individual stream (the third PCM such as hw:0,2) instead of
  the primary stream.

Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-04 07:26:59 +02:00
Don Fry 3c607d27c8 iwlagn: rename iwlagn module iwlwifi and alias to iwlagn.
Rename the iwlagn module as iwlwifi in preparation for future
changes.  Add an alias to iwlagn for backward compatibility.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03 15:22:38 -04:00
MyungJoo Ham ce26c5bb95 PM / devfreq: Add basic governors
Four cpufreq-like governors are provided as examples.

powersave: use the lowest frequency possible. The user (device) should
set the polling_ms as 0 because polling is useless for this governor.

performance: use the highest freqeuncy possible. The user (device)
should set the polling_ms as 0 because polling is useless for this
governor.

userspace: use the user specified frequency stored at
devfreq.user_set_freq. With sysfs support in the following patch, a user
may set the value with the sysfs interface.

simple_ondemand: simplified version of cpufreq's ondemand governor.

When a user updates OPP entries (enable/disable/add), OPP framework
automatically notifies devfreq to update operating frequency
accordingly. Thus, devfreq users (device drivers) do not need to update
devfreq manually with OPP entry updates or set polling_ms for powersave
, performance, userspace, or any other "static" governors.

Note that these are given only as basic examples for governors and any
devices with devfreq may implement their own governors with the drivers
and use them.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mike Turquette <mturquette@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-02 00:19:34 +02:00
MyungJoo Ham 9005b65099 PM / devfreq: Add common sysfs interfaces
Device specific sysfs interface /sys/devices/.../power/devfreq_*
- governor	R: name of governor
- cur_freq	R: current frequency
- polling_interval	R: polling interval in ms given with devfreq profile
			W: update polling interval.
- central_polling	R: 1 if polling is managed by devfreq framework

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mike Turquette <mturquette@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
--
 Documentation/ABI/testing/sysfs-class-devfreq |   44 ++++++++++++++++
 drivers/devfreq/devfreq.c                     |   69 ++++++++++++++++++++++++++
 2 files changed, 113 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-devfreq
2011-10-02 00:19:28 +02:00
Ingo Molnar 048b718029 Merge branch 'rcu/next' of git://github.com/paulmckrcu/linux into core/rcu 2011-10-01 14:21:36 +02:00
Johannes Berg 4b801bc969 mac80211: document client powersave
With the addition of uAPSD and driver buffering
the powersave handling has gotten quite complex.
Add a section to the documentation to explain it
for anyone wanting to implement it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30 15:57:24 -04:00
Roy.Li 605b91c8f6 net: Documentation: Fix type of variables
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29 14:57:19 -04:00
Paul E. McKenney d7bd2d68aa rcu: Document interpretation of RCU-lockdep splats
There has been quite a bit of confusion about what RCU-lockdep splats
mean, so this commit adds some documentation describing how to
interpret them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:38:28 -07:00
Paul E. McKenney 8cd889cbb6 rcu: Update documentation for additional RCU lockdep functions
Add documentation for rcu_dereference_bh_check(),
rcu_dereference_sched_check(), srcu_dereference_check(), and
rcu_dereference_index_check().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:38:25 -07:00
Michal Hocko e5177ec77d rcu: Not necessary to pass rcu_read_lock_held() to rcu_dereference_protected()
Since ca5ecddf (rcu: define __rcu address space modifier for sparse)
rcu_dereference_check() use rcu_read_lock_held() as a part of condition
automatically.  Therefore, callers of rcu_dereference_check() no longer
need to pass rcu_read_lock_held() to rcu_dereference_check().

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:38:23 -07:00
Paul E. McKenney e4cc1f22b2 rcu: Simplify quiescent-state accounting
There is often a delay between the time that a CPU passes through a
quiescent state and the time that this quiescent state is reported to the
RCU core.  It is quite possible that the grace period ended before the
quiescent state could be reported, for example, some other CPU might have
deduced that this CPU passed through dyntick-idle mode.  It is critically
important that quiescent state be counted only against the grace period
that was in effect at the time that the quiescent state was detected.

Previously, this was handled by recording the number of the last grace
period to complete when passing through a quiescent state.  The RCU
core then checks this number against the current value, and rejects
the quiescent state if there is a mismatch.  However, one additional
possibility must be accounted for, namely that the quiescent state was
recorded after the prior grace period completed but before the current
grace period started.  In this case, the RCU core must reject the
quiescent state, but the recorded number will match.  This is handled
when the CPU becomes aware of a new grace period -- at that point,
it invalidates any prior quiescent state.

This works, but is a bit indirect.  The new approach records the current
grace period, and the RCU core checks to see (1) that this is still the
current grace period and (2) that this grace period has not yet ended.
This approach simplifies reasoning about correctness, and this commit
changes over to this new approach.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:38:22 -07:00
Paul E. McKenney b15a2e7d16 rcu: Fix RCU's NMI documentation
It has long been the case that the architecture must call nmi_enter()
and nmi_exit() rather than irq_enter() and irq_exit() in order to
permit RCU read-side critical sections in NMIs.  Catch the documentation
up with reality.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
2011-09-28 21:36:44 -07:00
Paul E. McKenney bdf2a43649 rcu: Catch rcutorture up to new RCU API additions
Now that the RCU API contains synchronize_rcu_bh(), synchronize_sched(),
call_rcu_sched(), and rcu_bh_expedited()...

Make rcutorture test synchronize_rcu_bh(), getting rid of the old
rcu_bh_torture_synchronize() workaround.  Similarly, make rcutorture test
synchronize_sched(), getting rid of the old sched_torture_synchronize()
workaround.  Make rcutorture test call_rcu_sched() instead of wrappering
synchronize_sched().  Also add testing of rcu_bh_expedited().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:36:43 -07:00
Paul E. McKenney 63cd758e07 rcu: Update rcutorture documentation
Update rcutorture documentation to account for boosting, new types of
RCU torture testing that have been added over the past few years, and
the memory-barrier testing that was added an embarrassingly long time
ago.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:36:39 -07:00
Paul E. McKenney d5988af531 rcu: Update documentation to flag RCU_BOOST trace information
Call out the RCU_TRACE information that is provided only in kernels
built with RCU_BOOST.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:36:35 -07:00
Takashi Iwai ef940b0403 ALSA: hda - Allow patching with any vendor/subsystem ids
In the ugly real world, there area really broken devices that don't set
codec SSID correctly.  In such a case, the ID can be random, thus the
patching won't work reliably.

For applying the patch forcibly to such a device, the driver will skip
the vendor and/or subsystem ID checks when zero or a negative number is
given in [codec] section.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-28 20:19:16 +02:00
Takashi Iwai 27fe48d972 ALSA: hda - Add snoop option
Added a new option "snoop" for the traffic control of the HD-audio
controller chip.  When set to 0, the non-snooping mode is used with
the traffic control bit is set in each stream control register.
This may allow better operations in the low power mode, but the actual
implementation is depending pretty much on the chipset.

As already implemented, more or less each chipset has own snoop-control
register bit.  Now this setup refers to the snoop option, too.

Also, a new VIA chipset may require the non-snooping mode when set so
in BIOS.  In such a case, the option value is overridden.

As default, it's still set to snoop=1 for keeping the same behavior as
before.  In near future, it'll be set to 0 as default after checking
it works in every system well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-28 20:11:36 +02:00
Linus Torvalds 2ef7b45a59 Merge git://github.com/davem330/net
* git://github.com/davem330/net:
  ipv6-multicast: Fix memory leak in IPv6 multicast.
  ipv6: check return value for dst_alloc
  net: check return value for dst_alloc
  ipv6-multicast: Fix memory leak in input path.
  bnx2x: add missing break in bnx2x_dcbnl_get_cap
  bnx2x: fix WOL by enablement PME in config space
  bnx2x: fix hw attention handling
  net: fix a typo in Documentation/networking/scaling.txt
  ath9k: Fix a dma warning/memory leak
  rtlwifi: rtl8192cu: Fix unitialized struct
  iwlagn: fix dangling scan request
  batman-adv: do_bcast has to be true for broadcast packets only
  cfg80211: Fix validation of AKM suites
  iwlegacy: do not use interruptible waits
  iwlegacy: fix command queue timeout
  ath9k_hw: Fix Rx DMA stuck for AR9003 chips
2011-09-28 08:39:05 -07:00
Jason Wang e451e61b56 net: fix a typo in Documentation/networking/scaling.txt
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27 13:26:27 -04:00
Sean M. Collins 6ffe1ffb07 doc: raw1394: Trivial typo fix
Signed-off-by: Sean M. Collins <sean@coreitpro.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:05 +02:00
Paul Bolle 395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
Jonghun Han 446b792c6b [media] media: DocBook: Fix trivial typo in Sub-device Interface
When satisfied with the try results, applications can set the active formats
by setting the which argument to V4L2_SUBDEV_FORMAT_ACTIVE
not V4L2_SUBDEV_FORMAT_TRY.

Signed-off-by: Jonghun Han <jonghun.han@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-27 09:14:58 -03:00
Harry Wei 220c1ed1bd remove the messy code file Documentation/zh_CN/SubmitChecklist
This patch can remove the messy code file
Documentation/zh_CN/SumitChecklist. Of course, i will also fix this
matter and proofread it again and then submit it again.

Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 16:18:41 -07:00
Andiry Xu c1045e87b2 usbcore: add sysfs support to xHCI usb2 hardware LPM
This patch adds sysfs support to xHCI usb2 hardware LPM, so developer can
enable and disable usb2 hardware LPM manually for test purpose.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 15:51:10 -07:00
Linus Torvalds ef82bdc57a Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux
* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (coretemp) remove struct platform_data * parameter from create_core_data()
  hwmon: (coretemp) constify static data
  hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID
  hwmon: (ds620) Fix handling of negative temperatures
  hwmon: (w83791d) rename prototype parameter from 'register' to 'reg'
  hwmon: (coretemp) Don't use threshold registers for tempX_max
  hwmon: (coretemp) Let the user force TjMax
  hwmon: (coretemp) Drop duplicate function get_pkg_tjmax
2011-09-26 13:35:43 -07:00
Jamie Iles af75655c06 picoxcell: support for Picochip picoxcell devices
picoXcell is a family of femtocell devices with an ARM application
processor and picoArray DSP processor array.

This patch adds support for picoXcell boards to be booted using the
device tree registering the VIC's, UART's and timers.

v3:	- fixup vic compatible string in binding
v2:	- cleanup empty mach headers
	- convert to of_platform_populate()
	- simplify uncompress.h
	- split vic node into 2 devices
	- add missing __initconst attributes

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-09-26 16:11:56 +01:00
Alexander Graf 821246a5a5 KVM: Update documentation to include detailed ENABLE_CAP description
We have an ioctl that enables capabilities individually, but no description
on what exactly happens when we enable a capability using this ioctl.

This patch adds documentation for capability enabling in a new section
of the API documentation.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25 19:52:31 +03:00
Avi Kivity 364426871c KVM: Restore missing powerpc API docs
Commit 371fefd6 lost a doc hunk somehow, restore it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25 19:52:18 +03:00
Sasha Levin e1a72ae287 KVM: nVMX: Document 'nested' parameter
Add documentation of the new 'nested' parameter to
'Documentation/kernel-parameters.txt'.

Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25 19:18:02 +03:00
Sasha Levin 8c3ba334f8 KVM: x86: Raise the hard VCPU count limit
The patch raises the hard limit of VCPU count to 254.

This will allow developers to easily work on scalability
and will allow users to test high VCPU setups easily without
patching the kernel.

To prevent possible issues with current setups, KVM_CAP_NR_VCPUS
now returns the recommended VCPU limit (which is still 64) - this
should be a safe value for everybody, while a new KVM_CAP_MAX_VCPUS
returns the hard limit which is now 254.

Cc: Avi Kivity <avi@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Suggested-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-09-25 19:17:57 +03:00
Wolfram Sang e177129935 [media] gspca - zc3xx: New webcam 03f0:1b07 HP Premium Starter Cam
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-23 23:31:12 -03:00
Jean-François Moine 8f12b1ab2f [media] gspca - topro: New subdriver for Topro webcams
This driver is based on Anders Blomdell's source proposed in april 2009.
It has been extended to handle the tp6810 bridge and the soi763a sensor.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-23 23:28:49 -03:00
Laurent Pinchart 227bd5b353 [media] uvcvideo: Remove deprecated UVCIOC ioctls
The UVCIOC_CTRL_ADD, UVCIOC_CTRL_MAP_OLD, UVCIOC_CTRL_GET and
UVCIOC_CTRL_SET ioctls are deprecated and were scheduled for removal for
v2.6.42. As v2.6.42 == v3.2, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-23 20:06:51 -03:00
Mauro Carvalho Chehab be30497085 [media] move tm6000 to drivers/media/video
The serious bugs got fixed already.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-23 09:32:35 -03:00
David Rientjes e369fde1af thp: fix khugepaged defrag tunable documentation
Commit e27e6151b1 ("mm/thp: use conventional format for boolean
attributes") changed

  /sys/kernel/mm/transparent_hugepage/khugepaged/defrag

to be tuned by using 1 (enabled) or 0 (disabled) instead of "yes" and
"no", respectively.

Update the documentation.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 14:27:14 -07:00
Grant Likely 987bfad642 devicetree: Document Qualcomm and Atmel prefixes
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-22 11:20:39 -06:00
Bhanu Prakash Gollapudi 12b8fc10ea [SCSI] bnx2fc: Add driver documentation
bnx2fc.txt outlines the driver usage model.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-22 15:10:59 +04:00
Takashi Iwai af1910a817 Merge branch 'topic/asoc' into topic/remove-irqf_disable 2011-09-22 09:56:12 +02:00
David S. Miller 8decf86879 Merge branch 'master' of github.com:davem330/net
Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
2011-09-22 03:23:13 -04:00
Guenter Roeck f4af6fd6e2 hwmon: (coretemp) Don't use threshold registers for tempX_max
With commit c814a4c7c4, the meaning of tempX_max
was changed. It no longer returns the value of bits 8:15 of
MSR_IA32_TEMPERATURE_TARGET, but instead returns the value of CPU threshold
register T1. tempX_max_hyst was added to reflect the value of temperature
threshold register T0.

As it turns out, T0 and T1 are used on some systems, presumably by the BIOS.
Also, T0 and T1 don't have a well defined meaning. The thresholds may be used
as upper or lower limits, and it is not guaranteed that T0 <= T1. Thus, the new
attribute mapping does not reflect the actual usage of the threshold registers.
Also, register contents are changed during runtime by an entity other than the
hwmon driver, meaning the values cached by the driver do not reflect actual
register contents.

Revert most of c814a4c7c4 to address the problem.
Support for T0 and T1 will be added back in with a separate commit, using new
attribute names.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-21 17:25:18 -07:00
Jean Delvare a45a8c8571 hwmon: (coretemp) Let the user force TjMax
On old CPUs (and even some recent Atom CPUs) TjMax can't be read from
the CPU registers, so it is guessed by the driver using a complex
heuristic which isn't reliable. So let users who know their CPU's
TjMax pass it as a module parameter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "R, Durgadoss" <durgadoss.r@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-21 17:25:18 -07:00
Ming Lei 2e6ba515f5 PM / Runtime: pm_runtime_idle() can be called in atomic context
Add to pm_runtime_idle the list of functions that can be called
in atomic context if pm_runtime_irq_safe() has been called for the
device.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-21 22:31:33 +02:00
David S. Miller 0c070900f6 Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge 2011-09-21 15:25:47 -04:00
Ohad Ben-Cohen 300bab9770 hwspinlock/core: register a bank of hwspinlocks in a single API call
Hardware Spinlock devices usually contain numerous locks (known
devices today support between 32 to 256 locks).

Originally hwspinlock core required drivers to register (and later,
when needed, unregister) each lock separately.

That worked, but required hwspinlocks drivers to do a bit extra work
when they were probed/removed.

This patch changes hwspin_lock_{un}register() to allow a bank of
hwspinlocks to be {un}registered in a single invocation.

A new 'struct hwspinlock_device', which contains an array of 'struct
hwspinlock's is now being passed to the core upon registration (so
instead of wrapping each struct hwspinlock, a priv member has been added
to allow drivers to piggyback their private data with each hwspinlock).

While at it, several per-lock members were moved to be per-device:
1. struct device *dev
2. struct hwspinlock_ops *ops

In addition, now that the array of locks is handled by the core,
there's no reason to maintain a per-lock 'int id' member: the id of the
lock anyway equals to its index in the bank's array plus the bank's
base_id.
Remove this per-lock id member too, and instead use a simple pointers
arithmetic to derive it.

As a result of this change, hwspinlocks drivers are now simpler and smaller
(about %20 code reduction) and the memory footprint of the hwspinlock
framework is reduced.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21 19:45:34 +03:00
Juan Gutierrez 93b465c2e1 hwspinlock/core: use a mutex to protect the radix tree
Since we're using non-atomic radix tree allocations, we
should be protecting the tree using a mutex and not a
spinlock.

Non-atomic allocations and process context locking is good enough,
as the tree is manipulated only when locks are registered/
unregistered/requested/freed.

The locks themselves are still protected by spinlocks of course,
and mutexes are not involved in the locking/unlocking paths.

Cc: <stable@kernel.org>
Signed-off-by: Juan Gutierrez <jgutierrez@ti.com>
[ohad@wizery.com: rewrite the commit log, #include mutex.h, add minor
commentary]
[ohad@wizery.com: update register/unregister parts in hwspinlock.txt]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21 19:45:32 +03:00
Ohad Ben-Cohen e467b64214 hwspinlock/core: simplify 'owner' handling
Use struct device_driver's owner member instead of asking drivers to
explicitly pass the owner again.

This simplifies drivers and also save some memory, since there's no
point now in maintaining a separate owner pointer per hwspinlock.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21 19:45:32 +03:00
Grant Likely a81dd364de devicetree: Add a registry of vendor prefixes
There is no centralized listing for the in-use vendor prefixes
used in compatible strings and property names.  This patch adds one.
New prefixes should get added to this list to reduce the likelyhood
of namespace collisions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-21 09:19:16 -06:00
Hans Verkuil 882a935c43 [media] v4l2-controls.txt: update auto cluster documentation
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:50:19 -03:00
Antti Palosaari 9637433cf8 [media] get_dvb_firmware: whitespace fix
it9135 was the only one intended with spaces as others are tabs.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:09:19 -03:00
Antti Palosaari ead20951fb [media] get_dvb_firmware: update tda10071 file url
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:08:26 -03:00
Antti Palosaari 465301b10f [media] get_dvb_firmware: add dvb-fe-tda10071.fw
TDA10071 firmware version 1.21.31.2

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:08:19 -03:00
Hans Verkuil 88365105d6 [media] v4l2-ctrls: replace is_volatile with V4L2_CTRL_FLAG_VOLATILE
With the new flag there is no need anymore to have a separate is_volatile
field. Modify all users to use the new flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 09:52:21 -03:00
Hans Verkuil 74a4579086 [media] videodev2.h: add V4L2_CTRL_FLAG_VOLATILE
Add a new VOLATILE control flag that is set for volatile controls.
That way applications know whether the value of the control is volatile
(i.e. can change continuously) or not.

Until now this was an internal property, but it is useful to know in
userspace as well.

A typical use case is the gain value when autogain is on. In that case the
hardware will continuously adjust the gain based various environmental
factors.

This patch just adds and documents the flag, it's not yet used.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 09:52:21 -03:00
Suresh Siddha 41750d31fc x86, x2apic: Enable the bios request for x2apic optout
On the platforms which are x2apic and interrupt-remapping
capable, Linux kernel is enabling x2apic even if the BIOS
doesn't. This is to take advantage of the features that x2apic
brings in.

Some of the OEM platforms are running into issues because of
this, as their bios is not x2apic aware. For example, this was
resulting in interrupt migration issues on one of the platforms.
Also if the BIOS SMI handling uses APIC interface to send SMI's,
then the BIOS need to be aware of x2apic mode that OS has
enabled.

On some of these platforms, BIOS doesn't have a HW mechanism to
turnoff the x2apic feature to prevent OS from enabling it.

To resolve this mess, recent changes to the VT-d2 specification:

 http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf

includes a mechanism that provides BIOS a way to request system
software to opt out of enabling x2apic mode.

Look at the x2apic optout flag in the DMAR tables before
enabling the x2apic mode in the platform. Also print a warning
that we have disabled x2apic based on the BIOS request.

Kernel boot parameter "intremap=no_x2apic_optout" can be used to
override the BIOS x2apic optout request.

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.171766616@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:50 +02:00
Pekka Enberg d20bbfab01 Merge branch 'slab/urgent' into slab/next 2011-09-19 17:46:07 +03:00
Linus Torvalds b0e7031ac0 Merge git://github.com/davem330/net
* git://github.com/davem330/net: (62 commits)
  ipv6: don't use inetpeer to store metrics for routes.
  can: ti_hecc: include linux/io.h
  IRDA: Fix global type conflicts in net/irda/irsysctl.c v2
  net: Handle different key sizes between address families in flow cache
  net: Align AF-specific flowi structs to long
  ipv4: Fix fib_info->fib_metrics leak
  caif: fix a potential NULL dereference
  sctp: deal with multiple COOKIE_ECHO chunks
  ibmveth: Fix checksum offload failure handling
  ibmveth: Checksum offload is always disabled
  ibmveth: Fix issue with DMA mapping failure
  ibmveth: Fix DMA unmap error
  pch_gbe: support ML7831 IOH
  pch_gbe: added the process of FIFO over run error
  pch_gbe: fixed the issue which receives an unnecessary packet.
  sfc: Use 64-bit writes for TX push where possible
  Revert "sfc: Use write-combining to reduce TX latency" and follow-ups
  bnx2x: Fix ethtool advertisement
  bnx2x: Fix 578xx link LED
  bnx2x: Fix XMAC loopback test
  ...
2011-09-18 11:02:26 -07:00
Ingo Molnar bfa322c48d Merge branch 'linus' into sched/core
Merge reason: We are queueing up a dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-18 14:01:39 +02:00
Alan Stern 25aa55488c USB: document ehci-hcd's "companion" sysfs attribute
This patch (as1484) adds documentation for ehci-hcd's "companion"
sysfs attribute, which was added to the kernel over four years ago but
never documented.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18 01:48:37 -07:00
Mauro Carvalho Chehab 7577911244 Merge tag 'v3.1-rc6' into staging/for_v3.2
* tag 'v3.1-rc6': (1902 commits)
  Linux 3.1-rc6
  ioctl: register LTTng ioctl
  fuse: fix memory leak
  fuse: fix flock breakage
  Btrfs: add dummy extent if dst offset excceeds file end in
  Btrfs: calc file extent num_bytes correctly in file clone
  btrfs: xattr: fix attribute removal
  Btrfs: fix wrong nbytes information of the inode
  Btrfs: fix the file extent gap when doing direct IO
  Btrfs: fix unclosed transaction handle in btrfs_cont_expand
  Btrfs: fix misuse of trans block rsv
  Btrfs: reset to appropriate block rsv after orphan operations
  Btrfs: skip locking if searching the commit root in csum lookup
  btrfs: fix warning in iput for bad-inode
  Btrfs: fix an oops when deleting snapshots
  [media] vp7045: fix buffer setup
  [media] nuvoton-cir: simplify raw IR sample handling
  [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL
  [media] v4l2: Fix documentation of the codec device controls
  [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
  ...
2011-09-17 10:29:49 -03:00
Tore Anderson 026359bc6e ipv6: Send ICMPv6 RSes only when RAs are accepted
This patch improves the logic determining when to send ICMPv6 Router
Solicitations, so that they are 1) always sent when the kernel is
accepting Router Advertisements, and 2) never sent when the kernel is
not accepting RAs. In other words, the operational setting of the
"accept_ra" sysctl is used.

The change also makes the special "Hybrid Router" forwarding mode
("forwarding" sysctl set to 2) operate exactly the same as the standard
Router mode (forwarding=1). The only difference between the two was
that RSes was being sent in the Hybrid Router mode only. The sysctl
documentation describing the special Hybrid Router mode has therefore
been removed.

Rationale for the change:

Currently, the value of forwarding sysctl is the only thing determining
whether or not to send RSes. If it has the value 0 or 2, they are sent,
otherwise they are not. This leads to inconsistent behaviour in the
following cases:

* accept_ra=0, forwarding=0
* accept_ra=0, forwarding=2
* accept_ra=1, forwarding=2
* accept_ra=2, forwarding=1

In the first three cases, the kernel will send RSes, even though it will
not accept any RAs received in reply. In the last case, it will not send
any RSes, even though it will accept and process any RAs received. (Most
routers will send unsolicited RAs periodically, so suppressing RSes in
the last case will merely delay auto-configuration, not prevent it.)

Also, it is my opinion that having the forwarding sysctl control RS
sending behaviour (completely independent of whether RAs are being
accepted or not) is simply not what most users would intuitively expect
to be the case.

Signed-off-by: Tore Anderson <tore@fud.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 19:14:41 -04:00
David S. Miller 52b9aca7ae Merge branch 'master' of ../netdev/ 2011-09-16 01:09:02 -04:00
Giuseppe CAVALLARO 4f2f25f9f0 stmmac: update the doc with new info about the driver's debug (v3)
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:40:06 -04:00
Marcos Paulo de Souza 6b59e3191d Documentation: networking: dmfe.txt: Remove the maintainer of orphan networking driver
The dmfe module is a orphan driver, and with this was removed the maintainer
of the documentation.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:43 -04:00
Jiri Kosina e060c38434 Merge branch 'master' into for-next
Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.
2011-09-15 15:08:18 +02:00
Johannes Weiner 185efc0f9a memcg: Revert "memcg: add memory.vmscan_stat"
Revert the post-3.0 commit 82f9d486e5 ("memcg: add
memory.vmscan_stat").

The implementation of per-memcg reclaim statistics violates how memcg
hierarchies usually behave: hierarchically.

The reclaim statistics are accounted to child memcgs and the parent
hitting the limit, but not to hierarchy levels in between.  Usually,
hierarchical statistics are perfectly recursive, with each level
representing the sum of itself and all its children.

Since this exports statistics to userspace, this may lead to confusion
and problems with changing things after the release, so revert it now,
we can try again later.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-14 18:09:38 -07:00
Linus Torvalds bcd438be3b Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6
* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: (25 commits)
  [SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission
  [SCSI] libfc: fix referencing to fc_fcp_pkt from the frame pointer via fr_fsp()
  [SCSI] libfc: block SCSI eh thread for blocked rports
  [SCSI] libfc: fix fc_eh_host_reset
  [SCSI] fcoe: Fix deadlock between fip's recv_work and rtnl
  [SCSI] qla2xxx: Update version number to 8.03.07.07-k.
  [SCSI] qla2xxx: Set the task attributes after memsetting fcp cmnd.
  [SCSI] qla2xxx: Correct inadvertent loop state transitions during port-update handling.
  [SCSI] qla2xxx: Save and restore irq in the response queue interrupt handler.
  [SCSI] qla2xxx: Double check for command completion if abort mailbox command fails.
  [SCSI] qla2xxx: Acquire hardware lock while manipulating dsd list.
  [SCSI] qla2xxx: Fix qla24xx revision check while enabling interrupts.
  [SCSI] qla2xxx: T10 DIF - Fix incorrect error reporting.
  [SCSI] qla2xxx: T10 DIF - Handle uninitalized sectors.
  [SCSI] hpsa: fix physical device lun and target numbering problem
  [SCSI] hpsa: fix problem that OBDR devices are not detected
  [SCSI] isci: add version number
  [SCSI] isci: fix event-get pointer increment
  [SCSI] isci: dynamic interrupt coalescing
  [SCSI] isci: Leave requests alone if already terminating.
  ...
2011-09-14 16:09:14 -07:00
Shawn Guo dfcd04b19d i2c-imx: add device tree probe support
It adds device tree probe support for i2c-imx driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-09-14 22:16:14 +01:00
Clemens Ladisch dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Len Brown 38c0a0c9ae Merge branches 'apei', 'bz-13195' and 'doc' into acpi 2011-09-12 20:00:00 -04:00
Mathieu Desnoyers 14d01ff534 ioctl: register LTTng ioctl
The LTTng 2.0 kernel tracer (stand-alone module package, available at
http://lttng.org) uses the 0xF6 ioctl range for tracer control and
transport operations.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12 11:50:56 -07:00
Linus Torvalds 87adf1c66c Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
  [media] vp7045: fix buffer setup
  [media] nuvoton-cir: simplify raw IR sample handling
  [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL
  [media] v4l2: Fix documentation of the codec device controls
  [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
  [media] gspca - sonixj: Fix wrong register mask for sensor om6802
  [media] gspca - ov519: Fix LED inversion of some ov519 webcams
  [media] pwc: precedence bug in pwc_init_controls()
2011-09-11 14:58:47 -07:00
Kamil Debski 6a02a33067 [media] v4l2: Fix documentation of the codec device controls
Fixed missing ids of the codec controls description in the controls.xml file.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11 09:33:38 -03:00
Jean-François Moine 8d64d4f67e [media] gspca - ov534_9: New sensor ov9712 and new webcam 05a9:8065
The webcam is build from an Omnivision test kit which contains a OV538 bridge
and a OV9712 sensor.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11 09:26:54 -03:00
Brian Norris 48ee688df0 mtd: doc: remove mention of MEMSETOOBSEL
It's been gone for a while.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11 15:02:18 +03:00
Shawn Guo b94e757c4b mtd: dataflash: add device tree probe support
It adds device tree probe support for mtd_dataflash driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11 15:02:15 +03:00
Brian Norris bb9ebd4e71 mtd: nand: rename NAND_USE_FLASH_BBT
Recall the recently added prefix requirements:
 * "NAND_" for flags in nand.h, used in nand_chip.options
 * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options
        or in nand_bbt_descr.options

Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH.

Again, this flag is found in bbm.h and so should NOT be used in the
"nand_chip.options" field.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11 15:01:56 +03:00
Brian Norris a40f73419f mtd: nand: consolidate redundant flash-based BBT flags
This patch works with the following three flags from two headers (nand.h
and bbm.h):
  (1) NAND_USE_FLASH_BBT (nand.h)
  (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h)
  (3) NAND_BBT_NO_OOB (bbm.h)

These flags are all related and interdependent, yet they were in
different headers. Flag (2) is simply the combination of (1) and (3) and
can be eliminated.

This patch accomplishes the following:
  * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2))
  * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h

It's important to note that because (1) and (3) are now both found in
bbm.h, they should NOT be used in the "nand_chip.options" field.

I removed a small section from the mtdnand DocBook because it referes to
NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11 15:01:56 +03:00
JJ Ding 1dc6edec12 Input: elantech - add v4 hardware support
v4 hardware is a true multitouch capable touchpad (up to 5 fingers).
The packet format is quite complex, please see protocol document for
reference.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:35:02 -07:00
JJ Ding 28f4961611 Input: elantech - add v3 hardware support
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:58 -07:00
JJ Ding 1155961946 Input: elantech - correct x, y value range for v2 hardware
x, y values are actually 12-bit long. Also update protocol document to
reflect the change.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:25 -07:00
Simon Wunderlich 5f30a4ab4a batman-adv: update README (date & ap isolation sysfs file)
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:44:55 +02:00
Eduard Hasenleithner 5d7e7d4798 Input: wacom - add Intuos4 LED and OLED control
This commit enables control of the LEDs and OLED displays found on the
Wacom Intuos4 M, L, and XL. For this purpose, a new "wacom_led" attribute
group is added to the sysfs entry of the USB device.

This "wacom_led" group only shows up when the correct device (M, L, or XL)
is detected. The attributes are described in
 Documentation/ABI/testing/sysfs-wacom

Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07 14:19:01 -07:00
Dmitry Torokhov 7e66eaf14e Merge commit 'v3.1-rc4' into next 2011-09-07 14:18:36 -07:00
Guenter Roeck d91aae1e52 hwmon: (max16065) Add chip access warning to documentation
The chips supported by the max16065 driver should not be accessed using direct
i2ctools commands. Add warning to driver documentation to alert users.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-06 08:56:06 -07:00
Theodore Ts'o 56889787cf ext4: improve handling of conflicting mount options
If the user explicitly specifies conflicting mount options for
delalloc or dioread_nolock and data=journal, fail the mount, instead
of printing a warning and continuing (since many user's won't look at
dmesg and notice the warning).

Also, print a single warning that data=journal implies that delayed
allocation is not on by default (since it's not supported), and
furthermore that O_DIRECT is not supported.  Improve the text in
Documentation/filesystems/ext4.txt so this is clear there as well.

Similarly, if the dioread_nolock mount option is specified when the
file system block size != PAGE_SIZE, fail the mount instead of
printing a warning message and ignoring the mount option.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-03 18:22:38 -04:00
Andreas Oberritter 6fb2bdfa06 [media] DVB: Change API version in documentation: 3 -> 5.4
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-03 18:07:23 -03:00
Andreas Oberritter 7fc9da2a8f [media] DVB: improve documentation for satellite delivery systems
- Move voltage and tone to DVB-S.
- Add turbo code.
- In DVB-S2 and turbo code sections, refer to DVB-S, as both
  are extensions to DVB-S.
- Add modulation to DVB-S2.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-03 18:07:21 -03:00
Andreas Oberritter 83dc314bea [media] DVB: Add SYS_TURBO for north american turbo code FEC
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-03 18:07:14 -03:00
Linus Torvalds 4d7b5a116f Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix ->write_inode return values
  xfs: fix xfs_mark_inode_dirty during umount
  xfs: deprecate the nodelaylog mount option
2011-09-02 08:25:23 -07:00
Jason Liu a37933c37c slub: doc: update the slabinfo.c file path
slabinfo.c has been moved from Documentaion/vm/ to
tools/slub/ by commit:0d24db337e6d81c0c620ab65cc6947bd6553f742

Update the slub.txt doc to reflect this change too.

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-08-31 20:10:17 +03:00
Mark Brown d2dd0540c1 ASoC: Add device tree binding for WM8804
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31 09:52:57 +01:00
Mark Brown b6de431556 ASoC: Add device tree binding for WM8776
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31 09:52:50 +01:00
Mark Brown 13c7d08f54 ASoC: Add device tree binding for WM8770
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31 09:52:43 +01:00
Michael Witten bcd3cfc121 DocBook/drm: Clean up a todo-note
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:37 +00:00
Michael Witten 7f0925aca5 DocBook/drm: `device aware' -> `device-aware'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:35 +00:00
Michael Witten a5294e01f2 DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:33 +00:00
Michael Witten 5a462d58c8 DocBook/drm: Clean up the paragraph on framebuffer objects
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:32 +00:00
Michael Witten 964d32dcbe DocBook/drm: Use `; otherwise,'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:30 +00:00
Michael Witten e355b2014d DocBook/drm: Better flow with `, and then'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:28 +00:00
Michael Witten b8c6e0fe46 DocBook/drm: Refer to the domain-setting function as a device-specific ioctl
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:26 +00:00
Michael Witten 2d43f5d667 DocBook/drm: Improve flow of GPU/CPU coherence sentence
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:24 +00:00
Michael Witten 0c2d91a80a DocBook/drm: Use an <itemizelist> for fundamental GEM operations
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:22 +00:00
Michael Witten f877bd4ad5 DocBook/drm: Insert a comma
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:20 +00:00
Michael Witten 51b9500de2 DocBook/drm: Use a <variablelist> for vblank ioctls
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:18 +00:00
Michael Witten 65ffef508f DocBook/drm: Use an itemizedlist for what an encoder needs to provide
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:16 +00:00
Michael Witten 4dc0152d57 DocBook/drm: Insert `the' for readability, and change `set' to `setting'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:14 +00:00
Michael Witten 896ee65fb6 DocBook/drm: Remove extraneous commas
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:12 +00:00
Michael Witten 8a9ba910ac DocBook/drm: Use a colon
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:09 +00:00
Michael Witten 327d6fb962 DocBook/drm: Clarify `final initialization' via better formatting
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:07 +00:00
Michael Witten 3bf7df6156 DocBook/drm: Remove redundancy
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:05 +00:00
Michael Witten 1dbd39c3ea DocBook/drm: Insert `it' for smooth reading
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:03 +00:00
Michael Witten 9029bd7a42 DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes
From Webster's Revised Unabridged Dictionary (1913) [web1913]:

    So-called \So"-called`\, a.
       So named; called by such a name (but perhaps called thus with
       doubtful propriety).

  From WordNet (r) 2.0 [wn]:

    so-called
         adj : doubtful or suspect; "these so-called experts are no help"
               [syn: {alleged(a)}, {supposed}]

My strong conviction is that widespread use of 'so gennant'
or 'sogennant' in German has led to the creeping misuse of
'so-called' in English (especially through technical writings).

In English, it would be better to use:

  what is called

or a better translation of 'so gennant':

  so named

Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 20:00:01 +00:00
Michael Witten 54f2cb8fc9 DocBook/drm: Use a singular subject for grammatical cleanliness
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:59 +00:00
Michael Witten 482b2ad8e4 DocBook/drm: basic -> core
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:56 +00:00
Michael Witten 049cc903e7 DocBook/drm: Streamline wording of GEM initialization
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:54 +00:00
Michael Witten ae63d793a4 DocBook/drm: Insert `()' after function name
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:52 +00:00
Michael Witten 1c86de2216 DocBook/drm: Remove parentheses and unnecessary repetition
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:50 +00:00
Michael Witten 005d7f4a01 DocBook/drm: Insert missing comma
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:48 +00:00
Michael Witten eb2b8d4273 DocBook/drm: , -> :
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:59:45 +00:00
David Brown cfdad2aba7 msm_serial: Add devicetree support
Add devicetree support to the msm_serial driver.  Clocks are still
queried by direct name from the driver until device tree clock support
is implemented.

Change-Id: Ia6b2ddfcf1e5dc3bd25dd502662f971202e6d56f
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-08-29 12:47:36 -07:00
Michael Witten 8d36ffae67 DocBook/drm: can -> could
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:31:10 +00:00
Michael Witten 118bdd70bd DocBook/drm: Offset modifiers with commas
Signed-off-by: Michael Witten <mfwitten@gmail.com>
2011-08-29 19:31:08 +00:00