Commit Graph

16 Commits

Author SHA1 Message Date
Chris Metcalf 9b5bbf729d tile: correct r1 value during syscall tracing
The r1 value is set based on the r0 value as we return to user space.
So tracing tools won't automatically see the right value.  Fix this by
generating the correct r1 value in do_syscall_trace_exit() rather
than trying to tamper with the hot path in syscall return.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:20 -04:00
Chris Metcalf 2f9ac29eec tile: fast-path unaligned memory access for tilegx
This change enables unaligned userspace memory access via a kernel
fast path on tilegx.  The kernel tracks user PC/instruction pairs
per-thread using a direct-mapped cache in userspace.  The cache
maps those PC/instruction pairs to JIT'ed instruction sequences that
load or store using byte-wide load store intructions and then
synthesize 2-, 4- or 8-byte load or store results.  Once an
instruction has been seen to generate an unaligned access once,
subsequent hits on that instruction typically require overhead
of only around 50 cycles if cache and TLB is hot.

We support the prctl() PR_GET_UNALIGN / PR_SET_UNALIGN sys call to
enable or disable unaligned fixups on a per-process basis.

To do this we pull some of the tilepro unaligned support out of the
single_step.c file; tilepro uses instruction disassembly for both
single-step and unaligned access support.  Since tilegx actually has
hardware singlestep support, though, it's cleaner to keep the tilegx
unaligned access code in a separate file.  While we're at it,
properly rename the tilepro-specific types, etc., to have tilepro
suffixes instead of generic tile suffixes.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:04:10 -04:00
Simon Marchi 9fc1894c98 arch/tile: Fix syscall return value passed to tracepoint
Currently the syscall number is passed, but it should be the return
value, which is kept in r0.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [using a raw 0 value]
2013-04-24 16:45:55 -04:00
Simon Marchi ef567f25d5 tile: support TIF_SYSCALL_TRACEPOINT; select HAVE_SYSCALL_TRACEPOINTS
This patch adds support for the TIF_SYSCALL_TRACEPOINT on the tile
architecture. Basically, it calls the appropriate tracepoints on syscall
entry and exit.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-03-22 15:46:18 -04:00
Simon Marchi ef18272453 arch/tile: Call tracehook_report_syscall_{entry,exit} in syscall trace
Call tracehook functions for syscall tracing.

The check for TIF_SYSCALL_TRACE was removed, because the same check is
done right before in the assembly file.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [with ptrace.h fixup]
2013-03-21 15:39:34 -04:00
Simon Marchi 9af6254767 arch/tile: implement arch_ptrace using user_regset on tile
This patch changes arch_ptrace on tile so that it uses user_regset
to implement the PTRACE_GETREGS and PTRACE_SETREGS operations.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-12-18 14:53:14 -05:00
Simon Marchi 7be68284bd arch/tile: implement user_regset interface on tile
This is a basic implementation of user_regset for the tile
architecture. It reuses the basic blocks that were already there.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-12-18 14:53:06 -05:00
Chris Metcalf 395e095ed9 arch/tile: clean up tile-specific PTRACE_SETOPTIONS
Use the newer idioms for setting PTRACE_O_xxx and PT_TRACE_xxx flags.
Only set/clear tile-specific flags if the generic routine returns
success, since otherwise we want to avoid setting any flags at all.
Atomically update the ptrace flags with the new values.  Eliminate
the PT_TRACE_MASK_TILE bitmask and just shift PTRACE_O_MASK_TILE.
Add a BUILD_BUG_ON to avoid overlapping with generic bits.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-12-14 12:56:54 -05:00
Chris Metcalf cb67e161bc arch/tile: provide PT_FLAGS_COMPAT value in pt_regs
This flag is set for ptrace GETREGS or PEEKUSER for processes
that are COMPAT, i.e. 32-bit.  This allows things like strace
to easily discover what personality to use, for example.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-12-13 11:34:24 -05:00
Chris Metcalf 1deb9c5dfb arch/tile: don't allow user code to set the PL via ptrace or signal return
The kernel was allowing any component of the pt_regs to be updated either
by signal handlers writing to the stack, or by processes writing via
PTRACE_POKEUSR or PTRACE_SETREGS, which meant they could set their PL
up from 0 to 1 and get access to kernel code and data (or, in practice,
cause a kernel panic).  We now always reset the ex1 field, allowing the
user to set their ICS bit only.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01 15:31:17 -04:00
Namhyung Kim 8c0acac367 ptrace: cleanup arch_ptrace() on tile
Remove checking @addr less than 0 because @addr is now unsigned.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:12 -07:00
Namhyung Kim 9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Chris Metcalf ce7f2a3967 arch/tile: make ptrace() work properly for TILE-Gx COMPAT mode
Previously, we tried to pass 64-bit arguments through the
"COMPAT" mode 32-bit syscall API, which turned out not to work
well.  Now we just use straight 32-bit arguments in COMPAT mode,
thus requiring individual registers to be read/written with
two syscalls.  Of course this is uncommon, since usually all
the registers are read or written at once.

The restructuring applies to all the tile platforms, but is
plausibly better than the original code in any case.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 15:39:44 -04:00
Chris Metcalf bcd97c3f9a arch/tile: avoid erroneous error return for PTRACE_POKEUSR.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06 13:42:10 -04:00
Chris Metcalf 0707ad30d1 arch/tile: Miscellaneous cleanup changes.
This commit is primarily changes caused by reviewing "sparse"
and "checkpatch" output on our sources, so is somewhat noisy, since
things like "printk() -> pr_err()" (or whatever) throughout the
codebase tend to get tedious to read.  Rather than trying to tease
apart precisely which things changed due to which type of code
review, this commit includes various cleanups in the code:

- sparse: Add declarations in headers for globals.
- sparse: Fix __user annotations.
- sparse: Using gfp_t consistently instead of int.
- sparse: removing functions not actually used.
- checkpatch: Clean up printk() warnings by using pr_info(), etc.;
  also avoid partial-line printks except in bootup code.
  - checkpatch: Use exposed structs rather than typedefs.
  - checkpatch: Change some C99 comments to C89 comments.

In addition, a couple of minor other changes are rolled in
to this commit:

- Add support for a "raise" instruction to cause SIGFPE, etc., to be raised.
- Remove some compat code that is unnecessary when we fully eliminate
  some of the deprecated syscalls from the generic syscall ABI.
- Update the tile_defconfig to reflect current config contents.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06 13:41:51 -04:00
Chris Metcalf 867e359b97 arch/tile: core support for Tilera 32-bit chips.
This change is the core kernel support for TILEPro and TILE64 chips.
No driver support (except the console driver) is included yet.

This includes the relevant Linux headers in asm/; the low-level
low-level "Tile architecture" headers in arch/, which are
shared with the hypervisor, etc., and are build-system agnostic;
and the relevant hypervisor headers in hv/.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-06-04 17:11:18 -04:00