Commit Graph

10 Commits

Author SHA1 Message Date
Paul Gortmaker a83048ebd4 drivers: delete __cpuinit usage from all remaining drivers files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the remaining one-off uses of the __cpuinit macros
from all C files in the drivers/* directory.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:59 -04:00
Robert Richter 75c43a20b2 oprofile: Remove exit function for timer mode
Remove exit functions by moving init/exit code to oprofile's setup/
shutdown functions. Doing so the oprofile module exit code will be
easier and less error-prone.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04 15:04:35 +01:00
Robert Richter 87121ca504 oprofile: Fix crash when unloading module (hr timer mode)
Oprofile may crash in a KVM guest while unlaoding modules. This
happens if oprofile_arch_init() fails and oprofile switches to the hr
timer mode as a fallback. In this case oprofile_arch_exit() is called,
but it never was initialized properly which causes the crash. This
patch fixes this.

oprofile: using timer interrupt.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
PGD 41da3f067 PUD 41d80e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
CPU 5
Modules linked in: oprofile(-)

Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim
RIP: 0010:[<ffffffff8123c226>]  [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
RSP: 0018:ffff88041de1de98  EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200
RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620
RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082
R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080
R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210
FS:  00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040)
Stack:
 ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e
 ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993
 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200
Call Trace:
 [<ffffffffa000251e>] op_nmi_exit+0x15/0x17 [oprofile]
 [<ffffffffa00022c2>] oprofile_arch_exit+0xe/0x10 [oprofile]
 [<ffffffffa0004993>] oprofile_exit+0x13/0x15 [oprofile]
 [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f
 [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b
Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81
 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b
RIP  [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
 RSP <ffff88041de1de98>
CR2: 0000000000000008
---[ end trace 06d4e95b6aa3b437 ]---

CC: stable@kernel.org # 2.6.37+
Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04 15:04:33 +01:00
Robert Richter a0d76247e0 oprofile, s390: Rework hwsampler implementation
This patch is a rework of the hwsampler oprofile implementation that
has been applied recently. Now there are less non-architectural
changes. The only changes are:

* introduction of oprofile_add_ext_hw_sample(), and
* removal of section attributes of oprofile_timer_init/_exit().

To setup hwsampler for oprofile we need to modify start()/stop()
callbacks and additional hwsampler control files in oprofilefs. We do
not reinitialize the timer or hwsampler mode by restarting calling
init/exit() anymore, instead hwsampler_running is used to switch the
mode directly in oprofile_hwsampler_start/_stop(). For locking reasons
there is also hwsampler_file that reflects the value in oprofilefs.

The overall diffstat of the oprofile s390 hwsampler implemenation
shows the low impact to non-architectural code:

 arch/Kconfig                         |    3 +
 arch/s390/Kconfig                    |    1 +
 arch/s390/oprofile/Makefile          |    2 +-
 arch/s390/oprofile/hwsampler.c       | 1256 ++++++++++++++++++++++++++++++++++
 arch/s390/oprofile/hwsampler.h       |  113 +++
 arch/s390/oprofile/hwsampler_files.c |  162 +++++
 arch/s390/oprofile/init.c            |    6 +-
 drivers/oprofile/cpu_buffer.c        |   24 +-
 drivers/oprofile/timer_int.c         |    4 +-
 include/linux/oprofile.h             |    7 +
 10 files changed, 1567 insertions(+), 11 deletions(-)

Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-02-15 11:10:20 +01:00
Heinz Graalfs 997dbb4967 oprofile, s390: Enhance OProfile to support System zs hardware sampling feature
OProfile is enhanced to export all files for controlling System z's
hardware sampling, and to invoke hwsampler exported functions to
initialize and use System z's hardware sampling.

The patch invokes hwsampler_setup() during oprofile init and exports
following hwsampler files under oprofilefs if hwsampler's setup
succeeded:

A new directory for hardware sampling based files

 /dev/oprofile/hwsampling/

The userland daemon must explicitly write to the following files
to disable (or enable) hardware based sampling

 /dev/oprofile/hwsampling/hwsampler

to modify the actual sampling rate

 /dev/oprofile/hwsampling/hw_interval

to modify the amount of sampling memory (measured in 4K pages)

 /dev/oprofile/hwsampling/hw_sdbt_blocks

The following files are read only and show
the possible minimum sampling rate

 /dev/oprofile/hwsampling/hw_min_interval

the possible maximum sampling rate

 /dev/oprofile/hwsampling/hw_max_interval

The patch splits the oprofile_timer_[init/exit] function so that it
can be also called through user context (oprofilefs) to avoid kernel
oops.

Applied with following changes:
* whitespace changes in Makefile and timer_int.c

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Maran Pakkirisamy <maranp@linux.vnet.ibm.com>
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-02-15 11:08:50 +01:00
Santosh Shilimkar 4ac3dbec80 oprofile: Fix the hang while taking the cpu offline
The kernel build with CONFIG_OPROFILE and CPU_HOTPLUG enabled.
The oprofile is initialised using system timer in absence of hardware
counters supports. Oprofile isn't started from userland.

In this setup while doing a CPU offline the kernel hangs in infinite
for loop inside lock_hrtimer_base() function

This happens because as part of oprofile_cpu_notify(, it tries to
stop an hrtimer which was never started. These per-cpu hrtimers
are started when the oprfile is started.
	echo 1	> /dev/oprofile/enable

This problem also existwhen the cpu is booted with maxcpus parameter
set. When bringing the remaining cpus online the timers are started
even if oprofile is not yet enabled.

This patch fix this issue by adding a state variable so that
these hrtimer start/stop is only attempted when oprofile is
started

For stable kernels v2.6.35.y and v2.6.36.y.

Reported-by: Jan Sebastien <s-jan@ti.com>
Tested-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-29 11:52:53 +02:00
Martin Schwidefsky bc078e4eab oprofile: convert oprofile from timer_hook to hrtimer
Oprofile is currently broken on systems running with NOHZ enabled.
A maximum of 1 tick is accounted via the timer_hook if a cpu sleeps
for a longer period of time. This does bad things to the percentages
in the profiler output. To solve this problem convert oprofile to
use a restarting hrtimer instead of the timer_hook.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-03-02 17:03:20 +01:00
Robert Richter 6a18037d41 oprofile: fixing whitespaces in drivers/oprofile/*
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-16 15:01:40 +02:00
Robert Richter 25ad2913ca oprofile: more whitespace fixes
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15 20:55:51 +02:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00