Create a debugfs direcotry i5100_edac/mcX for each memory controller and
add nodes to control how fault injection is preformed.
After configuring an injection using inject_channel, inject_deviceptr1,
inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel
trigger the injection by writing anything to inject_enable.
Example of a CE injection:
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable
Example of UE injection:
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2
echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable
Sometimes it is needed to enable the injection more then once (echo to
the inject_enable node) for the injection to happen, I am not sure why.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add fault injection based on information datasheet for i5100, see 1. In
addition to the i5100 datasheet some missing information on injection
functions where found through experimentation and the i7300 datasheet,
see 2.
[1] Intel 5100 Memory Controller Hub Chipset
Doc.Nr: 318378
http://www.intel.com/content/dam/doc/datasheet/5100-
memory-controller-hub-chipset-datasheet.pdf
[2] Intel 7300 Chipset MemoryController Hub (MCH)
Doc.Nr: 318082
http://www.intel.com/assets/pdf/datasheet/318082.pdf
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Probe and store the device handle for the device 19 function 0 during
driver initialization. The device is used during fault injection.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, sdram_scrub_rate sysfs node is created even if the device
doesn't support get/set the scub rate. Change the logic to only
create this device node when the operation is supported.
Reported-by: Felipe Balbi <balbi@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After running a series of tests on an HP DL320, filled with different
memory sizes, it was noticed that, when filled with just one DIMM
on such hardware, the driver wrongly detects twice the memory, and
thinks that both channels 0 and 1 are filled.
It seems to be partially caused by the BIOS and partially by the driver.
The i3200_edac current logic would be working fine if the BIOS were
disabling the unused second channel when just one DIMM is connected,
in order to do power-saving, as recommended on this chipset's datasheet.
However, the BIOS on this particular machine doesn't do it:
[ 16.741421] EDAC DEBUG: how_many_channels: In dual channel mode
[ 16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled
So, the driver were assuming that 2 channels are enabled (well, they are,
but the second is unused).
Combined with that, I found two issues at the logic that creates the
EDAC data, that were failing when the two channels are not equally
filled (AFAICT, that happens only when just 1 DIMM is plugged).
The first one is that a 0 at DRB means that nothing is filled. The
driver's logic, however, do some calculation with that.
The second one is that the logic that fills the DIMM data currently
assumes that both channels are equally filled.
I tested the system already with the current configuration and my
patch and it is now working fine. So, for a 2R single DIMM 2Gb memory
at dimm slot 01 (channel 0), it is now displaying:
[ 16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0
[ 16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0
[ 16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0
[ 16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0
...
[ 16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb
[ 16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb
and the corresponding sysfs nodes are now properly filled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, it is not possible to know, when debug is enabled,
if the driver is using 2 DIMMS per channel mode or not. It is
not possible to know the values of the drbs registers, used
to identify the memory rank sizes.
Add debug for both, as it helps to track issues on the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Only one: AMD F16h MCE decoding enablement from Jacob Shin.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=LbcU
-----END PGP SIGNATURE-----
Merge tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"Mostly AMD's side of EDAC. It is basically a new family enablement
stuff: AMD F16h MCE decoding enablement from Jacob Shin. The rest is
trivial cleanups."
* tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
mpc85xx_edac: Fix typo
EDAC, MCE, AMD: Remove unneeded exports
EDAC, MCE, AMD: Add MCE decoding support for Family 16h
EDAC, MCE, AMD: Make MC2 decoding per-family
amd64_edac: Remove dead code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
=jjBc
-----END PGP SIGNATURE-----
Merge tag 'v3.8-rc7' into next
Linux 3.8-rc7
* tag 'v3.8-rc7': (12052 commits)
Linux 3.8-rc7
net: sctp: sctp_endpoint_free: zero out secret key data
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
atm/iphase: rename fregt_t -> ffreg_t
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
ARM: DMA mapping: fix bad atomic test
ARM: realview: ensure that we have sufficient IRQs available
ARM: GIC: fix GIC cpumask initialization
net: usb: fix regression from FLAG_NOARP code
l2tp: dont play with skb->truesize
net: sctp: sctp_auth_key_put: use kzfree instead of kfree
netback: correct netbk_tx_err to handle wrap around.
xen/netback: free already allocated memory on failure in xen_netbk_get_requests
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
xen/netback: shutdown the ring if it contains garbage.
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
virtio_console: Don't access uninitialized data.
net: qmi_wwan: add more Huawei devices, including E320
net: cdc_ncm: add another Huawei vendor specific device
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
...
Pull x86 platform changes from Ingo Molnar:
- Support for the Technologic Systems TS-5500 platform, by Vivien
Didelot
- Improved NUMA support on AMD systems:
Add support for federated systems where multiple memory controllers
can exist and see each other over multiple PCI domains. This
basically means that AMD node ids can be more than 8 now and the code
handling this is taught to incorporate PCI domain into those IDs.
- Support for the Goldfish virtual Android emulator, by Jun Nakajima,
Intel, Google, et al.
- Misc fixlets.
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Add TS-5500 platform support
x86/srat: Simplify memory affinity init error handling
x86/apb/timer: Remove unnecessary "if"
goldfish: platform device for x86
amd64_edac: Fix type usage in NB IDs and memory ranges
amd64_edac: Fix PCI function lookup
x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
x86, AMD, NB: Add multi-domain support
Initially, those strings describing different parts of an MCE message
were shared with amd64_edac and were therefore exported to modules.
However, all except pp_msgs are used only in one place right now so hide
them and make them static.
No functionality change.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Add MCE decoding logic for AMD Family 16h processors.
Boris:
- drop unneeded uu_msgs export
- exit early in cat_mc1_mce and save us an indentation level
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Currently only AMD Family 15h processors have special handling for MC2
errors. Since upcoming Family 16h will also need unique handling, let's
make MC2 handling part of amd_decoder_ops.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
5e2af0c09e ("edac: Don't initialize csrow's first_page & friends when
not needed") removed useless initialization of variables but left in the
functions which did that. They're unused now so drop them.
Signed-off-by: Borislav Petkov <bp@alien8.de>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use appropriate types for northbridge IDs and memory ranges. Mark
immutable data const and keep within compilation unit on related
structures.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com
[Boris: Drop arg change to node_to_amd_nb]
Signed-off-by: Borislav Petkov <bp@alien8.de>
Fix locating sibling memory controller PCI functions by using the
correct PCI domain and use a northbridge descriptor only if found. We
need to at least warn if it wasn't found so that it gets fixed and we
don't go off with wrong results.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-1-git-send-email-daniel@numascale-asia.com
[Boris: remove wrong comment, sanitize code and warn if NB desc lookup fails]
Signed-off-by: Borislav Petkov <bp@alien8.de>
Fix get_node_id to match northbridge IDs from the array of detected
ones, allowing multi-server support such as with Numascale's
NumaConnect, renaming to 'amd_get_node_id' for consistency.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com
[Boris: shorten lines to fit 80 cols]
Signed-off-by: Borislav Petkov <bp@alien8.de>
which spilled all EDAC suboptions into the 'Device Drivers' menu.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Qh4Y
-----END PGP SIGNATURE-----
Merge tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two error path fixes causing a crash and a Kconfig fix for an issue
which spilled all EDAC suboptions into the 'Device Drivers' menu."
* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Cleanup device deregistering path
EDAC: Fix EDAC Kconfig menu
EDAC: Fix kernel panic on module unloading
Use device_unregister to replace put_device + device_del for
cleanup, and fix the potential use after free.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
After f65aad41772f("MIPS: Cavium: Add EDAC support."), when entering
the "Device Drivers" toplevel menu in menuconfig, the suboptions behind
EDAC appeared merged with the rest of the device drivers types. This was
because the menuconfig option EDAC is querying an EDAC_SUPPORT Kconfig
bool which was defined after the menu definition.
When pushing EDAC_SUPPORT up, before the menu definition, the variable
is defined earlier and the above menuconfig artifact doesn't happen.
Drop a useless menuconfig comment while at it.
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Borislav Petkov <bp@alien8.de>
This patch fixes use-after-free and double-free bugs in
edac_mc_sysfs_exit(). mci_pdev has single reference and put_device()
calls mc_attr_release() which calls kfree(). The following
device_del() works with already released memory. An another kfree() in
edac_mc_sysfs_exit() releses the same memory again. Great.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: stable@vger.kernel.org # 3.[67]
Cc: Denis Kirjanov <kirjanov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurg
Signed-off-by: Borislav Petkov <bp@alien8.de>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove size from lookup arrays and mark them as const.
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are no more embedded kobjects in struct mem_ctl_info. Remove a header and
a comment that does not reflect the code anymore.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull MIPS updates from Ralf Baechle:
"The MIPS bits for 3.8. This also includes a bunch fixes that were
sitting in the linux-mips.org git tree for a long time. This pull
request contains updates to several OCTEON drivers and the board
support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
updates to the SSB bus support, MIPS kexec code and adds support for
kdump.
When pulling this, there are two expected merge conflicts in
include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
resolve, just remove the conflict markers and keep both alternatives."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
MIPS: PMC-Sierra Yosemite: Remove support.
VIDEO: Newport Fix console crashes
MIPS: wrppmc: Fix build of PCI code.
MIPS: IP22/IP28: Fix build of EISA code.
MIPS: RB532: Fix build of prom code.
MIPS: PowerTV: Fix build.
MIPS: IP27: Correct fucked grammar in ops-bridge.c
MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
MIPS: Fix potencial corruption
MIPS: Fix for warning from FPU emulation code
MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
MIPS: Remove unused smvp.h
MIPS/EDAC: Improve OCTEON EDAC support.
MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
MIPS: Remove usage of CEVT_R4K_LIB config option.
...
Some initialization errors are reported with the existing OCTEON EDAC
support patch. Also some parts have more than one memory controller.
Fix the errors and add multiple controllers if present.
Signed-off-by: David Daney <david.daney@cavium.com>
Drivers for EDAC on Cavium. Supported subsystems are:
o CPU primary caches. These are parity protected only, so only error
reporting.
o Second level cache - ECC protected, provides SECDED.
o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will
will only initialize if ECC is enabled on a system so is safe to run on
non-ECC memory.
o PCI: Parity error reporting
Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Pull EDAC fixes from Borislav Petkov:
- EDAC core error path fix, from Denis Kirjanov.
- Generalization of AMD MCE bank names and some minor error reporting
improvements.
- EDAC core cleanups and simplifications, from Wei Yongjun.
- amd64_edac fixes for sysfs-reported values, from Josh Hunt.
- some heavy amd64_edac error reporting path shaving, leading to
removing a bunch of code.
- amd64_edac error injection method improvements.
- EDAC core cleanups and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (24 commits)
EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code
EDAC: Handle error path in edac_mc_sysfs_init() properly
MCE, AMD: Dump error status
MCE, AMD: Report decoded error type first
MCE, AMD: Dump CPU f/m/s triple with the error
MCE, AMD: Remove functional unit references
EDAC: Convert to use simple_open()
EDAC, Calxeda highbank: Convert to use simple_open()
EDAC: Fix mc size reported in sysfs
EDAC: Fix csrow size reported in sysfs
EDAC: Pass mci parent
EDAC: Add memory controller flags
amd64_edac: Fix csrows size and pages computation
amd64_edac: Use DBAM_DIMM macro
amd64_edac: Fix K8 chip select reporting
amd64_edac: Reorganize error reporting path
amd64_edac: Do not check whether error address is valid
amd64_edac: Improve error injection
amd64_edac: Cleanup error injection code
amd64_edac: Small fixlets and cleanups
...
Use for_each_pci_dev to simplify the code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Boris: cleanup comments and drop loop brackets]
Signed-off-by: Borislav Petkov <bp@alien8.de>
It is very useful to have the family/model/stepping with the reported
error so dump it. This saves us asking the bug reporter about it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Having the functional unit names in each bank decode is only misleading
as this code supports multiple families and there's no guarantee the
mapping between FUs and MCE banks will stay the same.
And also, knowing the functional unit name doesn't help much since you
end up looking at the respective BKDG anyway.
So drop all FU references and use the MC bank numbers instead.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This is the complement to previous commit "EDAC: Fix csrow size
reported in sysfs". This fixes the memory controller size reporting on
csrow-based memory controllers. The csrow size is already combined for
both channels. Without this patch memory size is reported doubled.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
On csrow-based memory controllers, we combine the csrow size from both
channels and there's no need to do that again in csrow_size_show which
leads to double the size of a csrow.
Fix it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Make sure code pays attention to K8 having only one DCT, reformat and
cleanup code, correct debug messages, remove unused code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This basically reverts 603adaf6b3 ("amd64_edac: fix K8 chip select
reporting") because it was a clumsy workaround for DIMM sizes reporting
on K8 which got superceded by a much more correct one with 41d8bfaba7
("amd64_edac: Improve DRAM address mapping") without removing the prior
one. Remove it now finally.
Reported-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
All families report a valid error address when encountering a DRAM ECC
error so no need to check it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
amd64_get_dram_hole_info: remove local variable 'base'.
sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize
constants formatting.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
A reported error could look like this
[ 226.178315] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x427c0d offset:0xde0 grain:0 syndrome:0x1c6)
with two spaces back-to-back due to the msg argument of
edac_mc_handle_error being passed on empty by the specific drivers.
Handle that.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The tracepoint decodes the error type later anyway so remove a useless
assignment to the temporary p which gets overwritten later anyway.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Only levels [0:4] are allowed so enforce that. Also, while at it,
massage Kconfig text and add valid debug levels range to the module
parameter description.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Currently, we unconditionally enable PCI polling and we don't look at
the edac_op_state module parameter. Make this dependent on the parameter
setting supplied on the command line.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The i7core_edac addrmatch_dev and chancounts_dev have sysfs files
associated with them. The sysfs files, however, are coded so that the
parent device is is the mci device. This is incorrect and the mci struct
should be obtained through the addrmatch_dev and chancounts_dev device's
private data field which is populated in i7core_create_sysfs_devices().
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so
that the callers get the result they expect.
* Fix definition of FERR_FAT_FBD_ERR_MASK.
* Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on
register FERR_NF_FBD. We were lucky they have the same definition.
This fixes kernel bug #44131:
https://bugzilla.kernel.org/show_bug.cgi?id=44131
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver is currently filling data in a wrong way, on drivers
for csrows-based memory controller, when the first layer is a
csrow.
This is not easily to notice, as, in general, memories are
filed in dual, interleaved, symetric mode, as very few memory
controllers support asymetric modes.
While digging into a bug for i82795_edac driver, the asymetric
mode there is now working, allowing us to fill the machine with
4x1GB ranks at channel 0, and 2x512GB at channel 1:
Channel 0 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages)
Channel 1 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages)
Instead of properly showing the memories as such, before this patch, it
shows the memory layout as:
+-----------------------------------+
| mc0 |
| csrow0 | csrow1 | csrow2 |
----------+-----------------------------------+
channel1: | 1024 MB | 1024 MB | 512 MB |
channel0: | 1024 MB | 1024 MB | 512 MB |
----------+-----------------------------------+
as if both channels were symetric, grouping the DIMMs on a wrong
layout.
After this patch, the memory is correctly represented.
So, for csrows at layers[0], it shows:
+-----------------------------------------------+
| mc0 |
| csrow0 | csrow1 | csrow2 | csrow3 |
----------+-----------------------------------------------+
channel1: | 512 MB | 512 MB | 0 MB | 0 MB |
channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
----------+-----------------------------------------------+
For csrows at layers[1], it shows:
+-----------------------+
| mc0 |
| channel0 | channel1 |
--------+-----------------------+
csrow3: | 1024 MB | 0 MB |
csrow2: | 1024 MB | 0 MB |
--------+-----------------------+
csrow1: | 1024 MB | 512 MB |
csrow0: | 1024 MB | 512 MB |
--------+-----------------------+
So, no matter of what comes first, the information between
channel and csrow will be properly represented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.
As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.
Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2
It will be rewritten more robustly soonish.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Cc: stable@vger.kernel.org
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Pull powerpc updates from Benjamin Herrenschmidt:
"Some highlights in addition to the usual batch of fixes:
- 64TB address space support for 64-bit processes by Aneesh Kumar
- Gavin Shan did a major cleanup & re-organization of our EEH support
code (IBM fancy PCI error handling & recovery infrastructure) which
paves the way for supporting different platform backends, along
with some rework of the PCIe code for the PowerNV platform in order
to remove home made resource allocations and instead use the
generic code (which is possible after some small improvements to it
done by Gavin).
- Uprobes support by Ananth N Mavinakayanahalli
- A pile of embedded updates from Freescale folks, including new SoC
and board supports, more KVM stuff including preparing for 64-bit
BookE KVM support, ePAPR 1.1 updates, etc..."
Fixup trivial conflicts in drivers/scsi/ipr.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
powerpc/iommu: Fix multiple issues with IOMMU pools code
powerpc: Fix VMX fix for memcpy case
driver/mtd:IFC NAND:Initialise internal SRAM before any write
powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
powerpc: Remove tlb batching hack for nighthawk
powerpc: Set paca->data_offset = 0 for boot cpu
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
powerpc/mpc85xx: Update interrupt handling for IFC controller
powerpc/85xx: Enable USB support in p1023rds_defconfig
powerpc/smp: Do not disable IPI interrupts during suspend
powerpc/eeh: Fix crash on converting OF node to edev
powerpc/eeh: Lock module while handling EEH event
powerpc/kprobe: Don't emulate store when kprobe stwu r1
powerpc/kprobe: Complete kprobe and migrate exception frame
powerpc/kprobe: Introduce a new thread flag
powerpc: Remove unused __get_user64() and __put_user64()
powerpc/eeh: Global mutex to protect PE tree
powerpc/eeh: Remove EEH PE for normal PCI hotplug
...
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.
The net result is that memories are improperly reported there, when
high-density DIMMs are used:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.
After the patch, the memory size (16 GB) is properly detected:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix potential NULL pointer dereference in edac_unregister_sysfs() on
system boot introduced in 3.6-rc1.
Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct
device") edac_mc_alloc() no longer initializes embedded kobjects in
struct mem_ctl_info. Therefore edac_mc_free() can no longer simply
decrement a kobject reference count to free the allocated memory unless
the memory controller driver module had also called edac_mc_add_mc().
Now edac_mc_free() will check if the newly embedded struct device has
been registered with sysfs before using either the standard device
release functions or freeing the data structures itself with logic
pulled out of the error path of edac_mc_alloc().
The BUG this patch resolves for me:
BUG: unable to handle kernel NULL pointer dereference at (null)
EIP is at __wake_up_common+0x1a/0x6a
Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000)
Call Trace:
complete_all+0x3f/0x50
device_pm_remove+0x23/0xa2
device_del+0x34/0x142
edac_unregister_sysfs+0x3b/0x5c [edac_core]
edac_mc_free+0x29/0x2f [edac_core]
e7xxx_probe1+0x268/0x311 [e7xxx_edac]
e7xxx_init_one+0x56/0x61 [e7xxx_edac]
local_pci_probe+0x13/0x15
...
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
coccinelle warns about:
+ drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429
421 if (mci->csrows) {
> 422 for (chn = 0; chn < tot_channels; chn++) {
423 csr = mci->csrows[chn];
424 if (csr) {
> 425 for (chn = 0; chn < tot_channels; chn++)
426 kfree(csr->channels[chn]);
427 kfree(csr);
428 }
> 429 kfree(mci->csrows[i]);
430 }
431 kfree(mci->csrows);
432 }
and that code block seem to mess things up in several ways (double free, memory
leak, out-of-bound reads etc.):
L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
"row" and "tot_csrows" respectively. Which means either memory leak, or
out-of-bound reads (which if does not trigger an immediate page fault
error, will further lead to kfree() on random addresses).
L425: The inner loop is reusing the same iterator "chn" as the outer loop,
which could lead to premature end of the outer loop, and hence memory leak.
L429: The array index 'i' in mci->csrows[i] is a temporary value used in
previous loops, and won't change at all in the current loop. Which
means either out-of-bound read and possibly kfree(random number), or the
same mci->csrows[i] get freed once and again, and possibly double free
for the kfree(csr) in L427.
L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.
The buggy code was introduced by commit de3910eb ("edac: change the mem
allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
merge window. Fix it by freeing up resources in this order:
free csrows[i]->channels[j]
free csrows[i]->channels
free csrows[i]
free csrows
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We unified the Freescale pci/pcie initialization by changing the fsl_pci
to a platform driver. In previous PCI code architecture the initialization
routine is called at board_setup_arch stage. Now the initialization is done
in probe function which is architectural better. Also It's convenient for
adding PM support for PCI controller in later patch.
Now we registered pci controllers as platform devices. So we combine two
initialization code as one platform driver.
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().
Most conversions are straight-forward. Ones worth mentioning are,
* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
use mod_delayed_work() and cancel loop in
edac_mc_reset_delay_period() is dropped.
* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
watchdog is active or not. @fan_watchdog_active and related code
dropped.
* drivers/power/charger-manager.c: Seemingly a lot of
delayed_work_pending() abuse going on here.
[delayed_]work_pending() are unsynchronized and racy when used like
this. I converted one instance in fullbatt_handler(). Please
conver the rest so that it invokes workqueue APIs for the intended
target state rather than trying to game work item pending state
transitions. e.g. if timer should be modified - call
mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().
* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
simplified. Note that round_jiffies() calls in this function are
meaningless. round_jiffies() work on absolute jiffies not delta
delay used by delayed_work.
v2: Tomi pointed out that __cancel_delayed_work() users can't be
safely converted to mod_delayed_work(). They could be calling it
from irq context and if that happens while delayed_work_timer_fn()
is running, it could deadlock. __cancel_delayed_work() users are
dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Dreier <roland@kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
* devel: (33 commits)
edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
edac: allow specifying the error count with fake_inject
edac: add support for Calxeda highbank L2 cache ecc
edac: add support for Calxeda highbank memory controller
edac: create top-level debugfs directory
sb_edac: properly handle error count
i7core_edac: properly handle error count
edac: edac_mc_handle_error(): add an error_count parameter
edac: remove arch-specific parameter for the error handler
amd64_edac: Don't pass driver name as an error parameter
edac_mc: check for allocation failure in edac_mc_alloc()
edac: Increase version to 3.0.0
edac_mc: Cleanup per-dimm_info debug messages
edac: Convert debugfX to edac_dbg(X,
edac: Use more normal debugging macro style
edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
Edac: Add ABI Documentation for the new device nodes
edac: move documentation ABI to ABI/testing/sysfs-devices-edac
i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
edac: change the mem allocation scheme to make Documentation/kobject.txt happy
...
"pvt->ambase" is a u64 datatype. The intent here is to fill the first
half in the first call to pci_read_config_dword() and the other half in
the second. Unfortunately the pointer math is wrong so we set the wrong
data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In order to test if the error counters are properly incremented,
add a way to specify how many errors were generated by a trace.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for L2 ECC on Calxeda highbank platform.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for memory controller on Calxeda Highbank platforms. Highbank
platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit
detection.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Create a single, top-level "edac" directory for debugfs. An "mc[0-N]"
directory is then created for each memory controller. Individual drivers
can create additional entries such as h/w error injection control.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of reporting the error count via driver-specific details,
use the new way provided by edac_mc_handle_error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of generating a burst of errors or reporting the error
count via driver-specific details, use the new way provided by
edac_mc_handle_error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.
The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.
The changes at the drivers were made by this small script:
$file .=$_ while (<>);
$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
print $file;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.
The changes at the EDAC drivers were done by this small perl script:
$file .=$_ while (<>);
$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
print $file;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The EDAC driver name doesn't help to handle EDAC errors. So,
remove it from the EDAC error messages, preserving only the
error_message.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add a check here for if kzalloc() failed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There were lots of changes introduced to justify renaming it to
3.0.0:
- EDAC core were redesigned to represent all types of
memory controllers;
- EDAC API were redesigned to properly represent the memory
controller hierarchy;
- a tracepoint-based API were added to report memory errors.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use a more common debugging style.
Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert macros to a simpler style and enforce appropriate
format checking when not CONFIG_EDAC_DEBUG.
Use fmt and __VA_ARGS__, neaten macros.
Move some string arrays to the debugfx uses and remove the
now unnecessary CONFIG_EDAC_DEBUG variable block definitions.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The debug macro already adds that. Most of the work here was
made by this small script:
$f .=$_ while (<>);
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;
print $f;
After running the script, manual cleanups were done to fix it the remaining
places.
While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kernel kobjects have rigid rules: each container object should be
dynamically allocated, and can't be allocated into a single kmalloc.
EDAC never obeyed this rule: it has a single malloc function that
allocates all needed data into a single kzalloc.
As this is not accepted anymore, change the allocation schema of the
EDAC *_info structs to enforce this Kernel standard.
Cc: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kernel kobjects have rigid rules: each container object should be
dynamically allocated, and can't be allocated into a single kmalloc.
EDAC never obeyed this rule: it has a single malloc function that
allocates all needed data into a single kzalloc.
As this is not accepted anymore, change the allocation schema of the
EDAC *_info structs to enforce this Kernel standard.
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch actually fixes a bug with the legacy API, where, at the
same csrow, some channels may have different DIMMs. This can happen
on FB-DIMM/RAMBUS and modern Intel controllers.
This is the case, for example, of Nehalem machines:
$ ./edac-ctl --layout
+-----------------------------------+
| mc0 |
| channel0 | channel1 | channel2 |
-------+-----------------------------------+
slot2: | 0 MB | 0 MB | 0 MB |
slot1: | 1024 MB | 0 MB | 0 MB |
slot0: | 1024 MB | 1024 MB | 1024 MB |
-------+-----------------------------------+
Before this patch, non-filled memories were shown. Now, only what's
filled is there:
grep . /sys/devices/system/edac/mc/mc0/csrow*/ch?*
/sys/devices/system/edac/mc/mc0/csrow0/ch0_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow0/ch0_dimm_label:CPU#0Channel#0_DIMM#0
/sys/devices/system/edac/mc/mc0/csrow0/ch1_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow0/ch1_dimm_label:CPU#0Channel#0_DIMM#1
/sys/devices/system/edac/mc/mc0/csrow1/ch0_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow1/ch0_dimm_label:CPU#0Channel#1_DIMM#0
/sys/devices/system/edac/mc/mc0/csrow2/ch0_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow2/ch0_dimm_label:CPU#0Channel#2_DIMM#0
Thanks-to: Aristeu Rozanski Filho <arozansk@redhat.com>
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The 3e7bddc changeset (edac: move dimm properties to struct memset_info)
moved the calculus inside a loop. However, at those stuff are common to
all channels, on several drivers, it is better to put the calculus
outside the loop, to optimize the code.
Reported-by: Aristeu Rozanski Filho <arozansk@redhat.com>
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sometimes, it is useful to have a mechanism that generates fake
errors, in order to test the EDAC core code, and the userspace
tools.
Provide such mechanism by adding a few debugfs nodes.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The userspace tools need to know what's the maximum location on each
system, as it helps to create nice maps showing how the memory was
filled at the system.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The old EDAC API is broken. It only works fine for systems manufatured
before 2005 and for AMD 64. The reason is that it forces all memory
controller drivers to discover rank info.
Also, it doesn't allow grouping the several ranks into a DIMM.
So, what almost all modern drivers do is to create a fake virtual-rank
information, and use it to cheat the EDAC core to accept the driver.
While this works if the user has enough time to discover what DIMM slot
corresponds to each "virtual-rank" information, it prevents EDAC usage
for users with less available time. It also makes life hard for vendors
that may want to provide a table with their motherboards to the userspace
tool (edac-utils) as each driver has its own logic for the virtual
mapping.
So, the old API should be removed, in favor of a more flexible API that
allows newer drivers to not lie to the EDAC core.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that al users for the old kobj raw access are gone,
we can get rid of the legacy kobj-based structures and
data.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of relying on a complex logic inside the edac core to create
a "device tree-like" sysfs struct, just use device_add.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that the EDAC core supports struct device, there's no sense
on having any logic at the EDAC core to simulate it. So, instead
of adding such logic there, change the logic at amd64_edac to
use it.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that the EDAC core supports struct device, there's no sense on
having any logic at the EDAC core to simulate it. So, instead of adding
such logic there, change the logic at mpc85xx_edac to use it
compile-tested only.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The EDAC subsystem uses the old struct sysdev approach,
creating all nodes using the raw sysfs API. This is bad,
as the API is deprecated.
As we'll be changing the EDAC API, let's first port the existing
code to struct device.
There's one drawback on this patch: driver-specific sysfs
nodes, used by mpc85xx_edac, amd64_edac and i7core_edac
won't be created anymore. While it would be possible to
also port the device-specific code, that would mix kobj with
struct device, with is not recommended. Also, it is easier and nicer
to move the code to the drivers, instead, as the core can get rid
of some complex logic that just emulates what the device_add()
and device_create_file() already does.
The next patches will convert the driver-specific code to use
the device-specific calls. Then, the remaining bits of the old
sysfs API will be removed.
NOTE: a per-MC bus is required, otherwise devices with more than
one memory controller will hit a bug like the one below:
[ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev()
[ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1
[ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1
[ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0
[ 819.094984] ------------[ cut here ]------------
[ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0()
[ 819.107282] Hardware name: S2600CP
[ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0'
[ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan]
[ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1
[ 819.184113] Call Trace:
[ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0
[ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50
[ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0
[ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220
[ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20
[ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20
[ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0
[ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460
[ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core]
[ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core]
[ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core]
[ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac]
[ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac]
[ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90
[ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0
[ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100
[ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60
[ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270
[ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0
[ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0
[ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0
[ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90
[ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20
[ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0
[ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff
[ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140
[ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53
[ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff
[ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0
[ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac]
[ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170
[ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230
[ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b
[ 819.404633] ---[ end trace 1654fdd39556689f ]---
This happens because the bus is not being properly initialized.
Instead of putting the memory sub-devices inside the memory controller,
it is putting everything under the same directory:
$ tree /sys/bus/edac/
/sys/bus/edac/
├── devices
│ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts
│ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0
│ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1
│ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2
│ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0
│ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1
│ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3
│ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6
│ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch
│ ├── mc -> ../../../devices/system/edac/mc
│ └── mc0 -> ../../../devices/system/edac/mc/mc0
├── drivers
├── drivers_autoprobe
├── drivers_probe
└── uevent
On a multi-memory controller system, the names "csrow%d" and "dimm%d"
should be under "mc%d", and not at the main hierarchy level.
So, we need to create a per-MC bus, in order to have its own namespace.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The logic was checking the sizeof the structure being allocated to
determine whether an alignment fixup was required. This isn't right;
what we actually care about is the alignment of the actual pointer that's
about to be returned. This became an issue recently because struct
edac_mc_layer has a size that is not zero modulo eight, so we were
taking the correctly-aligned pointer and forcing it to be misaligned.
On Tile this caused an alignment exception.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev". Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.
No functional changes.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add a new tracepoint-based hardware events report method for
reporting Memory Controller events.
Part of the description bellow is shamelessly copied from Tony
Luck's notes about the Hardware Error BoF during LPC 2010 [1].
Tony, thanks for your notes and discussions to generate the
h/w error reporting requirements.
[1] http://lwn.net/Articles/416669/
We have several subsystems & methods for reporting hardware errors:
1) EDAC ("Error Detection and Correction"). In its original form
this consisted of a platform specific driver that read topology
information and error counts from chipset registers and reported
the results via a sysfs interface.
2) mcelog - x86 specific decoding of machine check bank registers
reporting in binary form via /dev/mcelog. Recent additions make use
of the APEI extensions that were documented in version 4.0a of the
ACPI specification to acquire more information about errors without
having to rely reading chipset registers directly. A user level
programs decodes into somewhat human readable format.
3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and
decodes errors reported via machine check bank registers in AMD
processors to the console log using printk();
Each of these mechanisms has a band of followers ... and none
of them appear to meet all the needs of all users.
As part of a RAS subsystem, let's encapsulate the memory error hardware
events into a trace facility.
The tracepoint printk will be displayed like:
mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail]
Where:
[quant] is the quantity of errors
[error msg] is the driver-specific error message
(e. g. "memory read", "bus error", ...);
[location] is the location in terms of memory controller and
branch/channel/slot, channel/slot or csrow/channel;
[label] is the memory stick label;
[edac_mc detail] describes the address location of the error
and the syndrome;
[driver detail] is driver-specifig error message details,
when needed/provided (e. g. "area:DMA", ...)
For example:
mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA)
Of course, any userspace tools meant to handle errors should not parse
the above data. They should, instead, use the binary fields provided by
the tracepoint, mapping them directly into their Management Information
Base.
NOTE: The original patch was providing an additional mechanism for
MCA-based trace events that also contained MCA error register data.
However, as no agreement was reached so far for the MCA-based trace
events, for now, let's add events only for memory errors.
A latter patch is planned to change the tracepoint, for those types
of event.
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
commit ca0907b "edac: Remove the legacy EDAC ABI" broke mpc85xx_edac
in the following manner:
mpc85xx_edac.c:983:35: error: too few arguments to function 'edac_mc_alloc'
this patch puts back the missing 'layers' argument.
[mchehab@redhat.com: As Ben sent a similar fix, I added his SOB on this patch]
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used
to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0).
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some edac drivers register themselves as mce decoders via
notifier_chain. But in current notifier_chain implementation logic,
it doesn't accept same notifier registered twice. If so, it will be
wrong when adding/removing the element from the list. For example,
on one SandyBridge platform, remove module sb_edac and then trigger
one error, it will hit oops because it has no mce decoder registered
but related notifier_chain still points to an invalid callback
function. Here is an example:
Call Trace:
[<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20
[<ffffffff8102b936>] mce_log+0x46/0x180
[<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60
[<ffffffff812e19d2>] ghes_do_proc+0x192/0x210
[<ffffffff812e2066>] ghes_proc+0x46/0x70
[<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80
[<ffffffff8150ef05>] notifier_call_chain+0x55/0x80
[<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80
[<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23
[<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b
[<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b
[<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f
[<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36
[<ffffffff81069dc2>] process_one_work+0x132/0x450
[<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0
[<ffffffff8106ba50>] ? manage_workers+0x120/0x120
[<ffffffff81070aee>] kthread+0x9e/0xb0
[<ffffffff81514724>] kernel_thread_helper+0x4/0x10
[<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff81514720>] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41
0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b
79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41
RIP [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80
RSP <ffff88042868fb20>
CR2: ffffffffa01af838
---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff810705b0>] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP
Only i7core_edac and sb_edac have such issues because they have more
than one memory controller which means they have to register mce
decoder many times.
Cc: <stable@vger.kernel.org> # 3.2 and upper
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull EDAC internal API changes from Mauro Carvalho Chehab:
"This changeset is the first part of a series of patches that fixes the
EDAC sybsystem. On this set, it changes the Kernel EDAC API in order
to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and
Intel E5-xxxx memory controllers.
The EDAC core used to assume that:
- the DRAM chip select pin is directly accessed by the memory
controller
- when multiple channels are used, they're all filled with the
same type of memory.
None of the above premises is true on Intel memory controllers since
2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory
Buffer or by some similar technologies hides the direct access to the
DRAM pins.
So, the existing drivers for those chipsets had to lie to the EDAC
core, in general telling that just one channel is filled. That
produces some hard to understand error messages like:
EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1
The location information there (row3 channel 0) is completely bogus:
it has no physical meaning, and are just some random values that the
driver uses to talk with the EDAC core. The error actually happened
at CPU socket 0, channel 0, slot 1, but this is not reported anywhere,
as the EDAC core doesn't know anything about the memory layout. So,
only advanced users that know how the EDAC driver works and that tests
their systems to see how DIMMs are mapped can actually benefit for
such error logs.
This patch series fixes the error report logic, in order to allow the
EDAC to expose the memory architecture used by them to the EDAC core.
So, as the EDAC core now understands how the memory is organized, it
can provide an useful report:
EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4)
The location of the DIMM where the error happened is reported by "MC0"
(cpu socket #0), at "channel:0 slot:1" location, and matches the
physical location of the DIMM.
There are two remaining issues not covered by this patch series:
- The EDAC sysfs API will still report bogus values. So,
userspace tools like edac-utils will still use the bogus data;
- Add a new tracepoint-based way to get the binary information
about the errors.
Those are on a second series of patches (also at -next), but will
probably miss the train for 3.5, due to the slow review process."
Fix up trivial conflict (due to spelling correction of removed code) in
drivers/edac/edac_device.c
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits)
i7core: fix ranks information at the per-channel struct
i5000: Fix the fatal error handling
i5100_edac: Fix a warning when compiled with 32 bits
i82975x_edac: Test nr_pages earlier to save a few CPU cycles
e752x_edac: provide more info about how DIMMS/ranks are mapped
i5000_edac: Fix the logic that retrieves memory information
i5400_edac: improve debug messages to better represent the filled memory
edac: Cleanup the logs for i7core and sb edac drivers
edac: Initialize the dimm label with the known information
edac: Remove the legacy EDAC ABI
x38_edac: convert driver to use the new edac ABI
tile_edac: convert driver to use the new edac ABI
sb_edac: convert driver to use the new edac ABI
r82600_edac: convert driver to use the new edac ABI
ppc4xx_edac: convert driver to use the new edac ABI
pasemi_edac: convert driver to use the new edac ABI
mv64x60_edac: convert driver to use the new edac ABI
mpc85xx_edac: convert driver to use the new edac ABI
i82975x_edac: convert driver to use the new edac ABI
i82875p_edac: convert driver to use the new edac ABI
...
There is a flag at the per-channel struct that indicates if there are
any 4R dimm on it. The way the presence of this flag were reported
is not ok, as it might give the false idea that the channel were filled
with 2R memories:
[ 580.588701] EDAC DEBUG: get_dimm_config: Ch1 phy rd1, wr1 (0x063f7431): 2 ranks, UDIMMs
[ 580.588704] EDAC DEBUG: get_dimm_config: dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
(in this case, just one 1R memory is filled on channel 1)
So, use a better way to represent the per-channel ranks information.
After the patch, it will show:
[ 2002.233978] EDAC DEBUG: get_dimm_config: Ch0 phy rd0, wr0 (0x063f7431): UDIMMs
[ 2002.233982] EDAC DEBUG: get_dimm_config: dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
[ 2002.233988] EDAC DEBUG: get_dimm_config: dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
(in this case, there isn't any 4R memories)
Reported-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The fatal error channel bits point to a single channel, and not
to a range of channels. Fix the code to properly report it,
instead of printing messages like:
kernel: EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/edac/i5100_edac.c: In function ‘i5100_init_csrows’:
drivers/edac/i5100_edac.c:862:3: warning: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 5 has type ‘long unsigned int’ [-Wformat]
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The logic there is broken: it basically creates two csrows for
each DIMM and assumes that all DIMM's are dual rank. Only one of
the csrows will contain the entire DIMM size. If single rank
memories are found, they'll be marked with 0 bytes.
The check if the AMB is present were also wrong.
Yet, as the error reports don't use the memory size in order to
credit an error to the right DIMM, that part of the driver seems
to work. That's why probably nobody detected the issue yet.
After this patch, the memory layout is now properly reported,
when debug mode is enabled, and the number of ranks per dimm is
now shown:
calculate_dimm_size: ----------------------------------------------------------
calculate_dimm_size: slot 3 0 MB | 0 MB | 0 MB | 0 MB |
calculate_dimm_size: slot 2 0 MB | 0 MB | 0 MB | 0 MB |
calculate_dimm_size: ----------------------------------------------------------
calculate_dimm_size: slot 1 0 MB | 0 MB | 0 MB | 0 MB |
calculate_dimm_size: slot 0 512 MB 1R| 512 MB 1R| 512 MB 1R| 512 MB 1R|
calculate_dimm_size: ----------------------------------------------------------
calculate_dimm_size: channel 0 | channel 1 | channel 2 | channel 3 |
calculate_dimm_size: branch 0 | branch 1 |
(1R above means that all memories on my test machine are single-ranked)
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Improves the debug output message, in order to better represent the
memory controller hierarchy, when outputing the debug messages.
No functional changes when debug is disabled.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove some information that it is duplicated at the MCE log,
and don't have much usage for the error. Those data will be
added again, when creating a trace function that outputs both
memory errors and MCE fields.
Cc: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While userspace doesn't fill the dimm labels, add there the dimm location,
as described by the used memory model. This could eventually match what
is described at the dmidecode, making easier for people to identify the
memory.
For example, on an Intel motherboard where the DMI table is reliable,
the first memory stick is described as:
Memory Device
Array Handle: 0x0029
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 1
Locator: A1_DIMM0
Bank Locator: A1_Node0_Channel0_Dimm0
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 800 MHz
Manufacturer: A1_Manufacturer0
Serial Number: A1_SerNum0
Asset Tag: A1_AssetTagNum0
Part Number: A1_PartNum0
The memory named as "A1_DIMM0" is physically located at the first
memory controller (node 0), at channel 0, dimm slot 0.
After this patch, the memory label will be filled with:
/sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0
And (after the new EDAC API patches) as:
/sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0
So, even if the memory label is not initialized on userspace, an useful
information with the error location is filled there, expecially since
several systems/motherboards are provided with enough info to map from
channel/slot (or branch/channel/slot) into the DIMM label. So, letting the
EDAC core fill it by default is a good thing.
It should noticed that, as the label filling happens at the
edac_mc_alloc(), drivers can override it to better describe the memories
(and some actually do it).
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that all drivers got converted to use the new ABI, we can
drop the old one.
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Tim Small <tim@buttersideup.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Tim Small <tim@buttersideup.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Mark Gross <mark.gross@intel.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change the EDAC internal representation to work with non-csrow
based memory controllers.
There are lots of those memory controllers nowadays, and more
are coming. So, the EDAC internal representation needs to be
changed, in order to work with those memory controllers, while
preserving backward compatibility with the old ones.
The edac core was written with the idea that memory controllers
are able to directly access csrows.
This is not true for FB-DIMM and RAMBUS memory controllers.
Also, some recent advanced memory controllers don't present a per-csrows
view. Instead, they view memories as DIMMs, instead of ranks.
So, change the allocation and error report routines to allow
them to work with all types of architectures.
This will allow the removal of several hacks with FB-DIMM and RAMBUS
memory controllers.
Also, several tests were done on different platforms using different
x86 drivers.
TODO: a multi-rank DIMMs are currently represented by multiple DIMM
entries in struct dimm_info. That means that changing a label for one
rank won't change the same label for the other ranks at the same DIMM.
This bug is present since the beginning of the EDAC, so it is not a big
deal. However, on several drivers, it is possible to fix this issue, but
it should be a per-driver fix, as the csrow => DIMM arrangement may not
be equal for all. So, don't try to fix it here yet.
I tried to make this patch as short as possible, preceding it with
several other patches that simplified the logic here. Yet, as the
internal API changes, all drivers need changes. The changes are
generally bigger in the drivers for FB-DIMMs.
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The edac_align_ptr() function is used to prepare data for a single
memory allocation kzalloc() call. It counts how many bytes are needed
by some data structure.
Using it as-is is not that trivial, as the quantity of memory elements
reserved is not there, but, instead, it is on a next call.
In order to avoid mistakes when using it, move the number of allocated
elements into it, making easier to use it.
Reviewed-by: Borislav Petkov <bp@amd64.org>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The number of pages is a dimm property. Move it to the dimm struct.
After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.
A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Niklas Söderlund
Mauro Carvalho Chehab
Linus Torvalds
Baruch Siach
Joe Perches
Dan Carpenter
Borislav Petkov
Jacob Shin
Kees Cook
Daniel J Blueman
Lans Zhang
Konstantin Khlebnikov
Greg Kroah-Hartman
Lans Zhang
Niklas Söderlund
Shaun Ruffell
David Daney
Ralf Baechle
Wei Yongjun
Denis Kirjanov
Borislav Petkov
Josh Hunt
Prarit Bhargava
Jean Delvare
Andrew Morton
Fengguang Wu
Jia Hongtao
Tejun Heo
Rob Herring
Chris Metcalf
Kim Phillips
Chen Gong
H. Peter Anvin
Ingo Molnar