Commit Graph

26 Commits

Author SHA1 Message Date
Roland Dreier 658bcef619 IPoIB: Remove unused local_rate tracking
Now that low-level drivers handle the conversion from an absolute rate
to a relative rate, there's no need for the IPoIB driver to keep track
of the local port's data rate.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-21 20:28:05 -08:00
Michael S. Tsirkin 839fcaba35 IPoIB: Connected mode experimental support
The following patch adds experimental support for IPoIB connected
mode, as defined by the draft from the IETF ipoib working group.  The
idea is to increase performance by increasing the MTU from the maximum
of 2K (theoretically 4K) supported by IPoIB on top of UD.  With this
code, I'm able to get 800MByte/sec or more with netperf without
options on a Mellanox 4x back-to-back DDR system.

Some notes on code:
1. SRQ is used for scalability to large cluster sizes
2. Only RC connections are used (UC does not support SRQ now)
3. Retry count is set to 0 since spec draft warns against retries
4. Each connection is used for data transfers in only 1 direction, so
   each connection is either active(TX) or passive (RX).  2 sides that
   want to communicate create 2 connections.
5. Each active (TX) connection has a separate CQ for send completions -
   this keeps the code simple without CQ resize and other tricks
6. To detect stale passive side connections (where the remote side is
   down), we keep an LRU list of passive connections (updated once per
   second per connection) and destroy a connection after it has been
   unused for several seconds. The LRU rule makes it possible to avoid
   scanning connections that have recently been active.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 08:00:48 -08:00
Ralph Campbell 37ccf9df97 IPoIB: Use the new verbs DMA mapping functions
Convert IPoIB to use the new DMA mapping functions
for kernel verbs consumers.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 14:30:48 -08:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Michael S. Tsirkin 2745b5b713 IPoIB: Fix skb leak when freeing neighbour
ipoib_neigh_free() is sometimes called while neighbour is still alive,
so it might still have queued skbs.  Fix skb leak in this case.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:09 -08:00
David Howells c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Michael S. Tsirkin c1a0b23bf4 IB/sa: Require SA registration
Require users to register with SA module, to prevent the sa_query
module text from going away while an SA query callback is still
running.  Update all in-tree users for the new interface.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:53 -07:00
Michael S. Tsirkin 8a7f752125 IB/ipoib: Fix packet loss after hardware address update
The neighbour ha field may get updated without destroying the
neighbour.  In this case, the ha field gets out of sync with the
address handle stored in ipoib_neigh->ah, with the result that
the ah field would point to an incorrect path, resulting in all
packets being lost.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24 09:18:07 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Jack Morgenstein 37c22a7721 IPoIB: Fix kernel unaligned access on ia64
Fix misaligned access faults on ia64: never cast a misaligned
neighbour->ha + 4 pointer to union ib_gid type; pass a void * pointer
instead.  The memcpy was being optimized to use full word accesses
because the compiler thought that union ib_gid is always aligned.

The cast in IPOIB_GID_ARG is safe, since it is fixed to access each
byte separately.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:35 -07:00
Shirley Ma 0f4852513f IPoIB: Make send and receive queue sizes tunable
Make IPoIB's send and receive queue sizes tunable via module
parameters ("send_queue_size" and "recv_queue_size").  This allows the
queue sizes to be enlarged to fix disastrously bad performance on some
platforms and workloads, without bloating memory usage when large
queues aren't needed.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:58 -07:00
Michael S. Tsirkin d2e0655ede IPoIB: Consolidate private neighbour data handling
Consolidate IPoIB's private neighbour data handling into
ipoib_neigh_alloc() and ipoib_neigh_free().  This will make it easier
to keep track of the neighbour structures that IPoIB is handling, and
is a nice cleanup of the code:

add/remove: 2/1 grow/shrink: 1/8 up/down: 100/-178 (-78)
function                                     old     new   delta
ipoib_neigh_alloc                              -      61     +61
ipoib_neigh_free                               -      36     +36
ipoib_mcast_join_finish                     1288    1291      +3
path_rec_completion                          575     573      -2
ipoib_mcast_join_task                        664     660      -4
ipoib_neigh_destructor                       101      92      -9
ipoib_neigh_setup_dev                         14       3     -11
ipoib_neigh_setup                             17       -     -17
path_free                                    238     215     -23
ipoib_mcast_free                             329     306     -23
ipoib_mcast_send                             718     684     -34
neigh_add_path                               705     650     -55

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-04 14:46:48 -07:00
Leonid Arsh 7a343d4c46 IPoIB: P_Key change event handling
This patch causes the network interface to respond to P_Key change
events correctly.  As a result, you'll see a child interface in the
"RUNNING" state (netif_carrier_on()) only when the corresponding P_Key
is configured by the SM.  When SM removes a P_Key, the "RUNNING" state
will be disabled for the corresponding network interface.  To
implement this, I added IB_EVENT_PKEY_CHANGE event handling.  To
prevent flushing the device before the device is open by the "delay
open" mechanism, I added an additional device flag called
IPOIB_FLAG_INITIALIZED.

This also prevents the child network interface from trying to join to
multicast groups until the PKEY is configured.  We used to get error
messages like:

    ib0.f2f2: couldn't attach QP to multicast group ff12:401b:f2f2:0:0:0:ffff:ffff

in this case.  To fix this, I just check IPOIB_FLAG_OPER_UP flag in
ipoib_set_mcast_list().

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-24 15:47:30 -08:00
Jack Morgenstein 0b3ea0829c IPoIB: Move ipoib_ib_dev_flush() to ipoib workqueue
Move ipoib_ib_dev_flush() to ipoib's workqueue.  This keeps it ordered
with respect to other work scheduled by the ipoib driver.  This fixes
problems with races, for example:
 - ipoib_ib_dev_flush() has started running because of an IB event
 - user does ifconfig ib0 down
 - ipoib_mcast_stop_thread() gets called twice and waits for the same
   completion twice

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:24 -08:00
Michael S. Tsirkin 44af79f952 IPoIB: clarify to_ipoib_neigh()
Cosmetic change: make alignment explicit in to_ipoib_neigh.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:16 -08:00
Michael S. Tsirkin 479a079663 IPoIB: Don't start send-only joins while multicast thread is stopped
Fix the following race scenario:
  - Device is up.
  - Port event or set mcast list triggers ipoib_mcast_stop_thread,
    this cancels the query and waits on mcast "done" completion.
  - Completion is called and "done" is set.
  - Meanwhile, ipoib_mcast_send arrives and starts a new query,
    re-initializing "done".

Fix this by adding a "multicast started" bit and checking it before
starting a send-only join.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-02-07 16:37:08 -08:00
Ingo Molnar 95ed644fd1 IB: convert from semaphores to mutexes
semaphore to mutex conversion by Ingo and Arjan's script.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Sanity-checked on real IB hardware ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-13 14:51:39 -08:00
Roland Dreier 1732b0ef3b [IPoIB] add path record information in debugfs
Add ibX_path files to debugfs that contain information about the IPoIB
path cache.  IPoIB ARP only gives GIDs, which the IPoIB driver must
resolve to real IB paths through the ib_sa module.  For debugging,
when the ARP table looks OK but traffic isn't flowing, it's useful to
be able to see if the resolution from GID to path worked.

Also clean up the formatting of the existing _mcg debugfs files.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10 10:22:49 -08:00
Roland Dreier 8ae5a8a24f [IPoIB] don't compile debug code if debugging isn't enabled
Don't build ipoib_mcast_iter_ functions if CONFIG_INFINIBAND_IPOIB_DEBUG
is not enabled -- their only callers will not be built either.

Also move the prototype for ipoib_open() to ipoib.h to fix a sparse warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 20:51:01 -08:00
Roland Dreier 1993d683f3 [IPoIB] Drop RX packets when out of memory
Change the way IPoIB handles RX packets when it can't allocate a new
receive skbuff.  If the allocation of a new receive skb fails, we now
drop the packet we just received and repost the original receive skb.
This means that the receive ring always stays full and we don't have
to monkey around with trying to schedule a refill task for later.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-28 15:30:34 -07:00
Roland Dreier 5b6810e048 [IPoIB] Rename ipoib_create_qp() -> ipoib_init_qp() and fix error cleanup
ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't
destroy the QP on failure -- that unwinding happens elsewhere, so the
current code can cause a double free.  While we're at it, the
function's name should match what it actually does, so rename it to
ipoib_init_qp().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:29 -07:00
Roland Dreier 8d2cae0651 [PATCH] IPoIB: Don't flush workqueue from within workqueue
ipoib_mcast_restart_task() is always called from within the
single-threaded IPoIB workqueue, so flushing the workqueue from within
the function can lead to a recursion overflow.  But since we're
running in a single-threaded workqueue, we're already synchronized
against other items in the workqueue, so just get rid of the flush in
ipoib_mcast_restart_task().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-20 10:52:04 -07:00
Roland Dreier a4d61e8480 [PATCH] IB: move include files to include/rdma
Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:38 -07:00
Sean Hefty 97f52eb438 [PATCH] IB: sparse endianness cleanup
Fix sparse warnings.  Use __be* where appropriate.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Roland Dreier 2a1d9b7f09 [PATCH] IB: Add copyright notices
Make some lawyers happy and add copyright notices for people who
forgot to include them when they actually touched the code.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00