Commit Graph

303 Commits

Author SHA1 Message Date
Linus Torvalds a0725ab0c7 Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the first pull request for 4.14, containing most of the code
  changes. It's a quiet series this round, which I think we needed after
  the churn of the last few series. This contains:

   - Fix for a registration race in loop, from Anton Volkov.

   - Overflow complaint fix from Arnd for DAC960.

   - Series of drbd changes from the usual suspects.

   - Conversion of the stec/skd driver to blk-mq. From Bart.

   - A few BFQ improvements/fixes from Paolo.

   - CFQ improvement from Ritesh, allowing idling for group idle.

   - A few fixes found by Dan's smatch, courtesy of Dan.

   - A warning fixup for a race between changing the IO scheduler and
     device remova. From David Jeffery.

   - A few nbd fixes from Josef.

   - Support for cgroup info in blktrace, from Shaohua.

   - Also from Shaohua, new features in the null_blk driver to allow it
     to actually hold data, among other things.

   - Various corner cases and error handling fixes from Weiping Zhang.

   - Improvements to the IO stats tracking for blk-mq from me. Can
     drastically improve performance for fast devices and/or big
     machines.

   - Series from Christoph removing bi_bdev as being needed for IO
     submission, in preparation for nvme multipathing code.

   - Series from Bart, including various cleanups and fixes for switch
     fall through case complaints"

* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
  kernfs: checking for IS_ERR() instead of NULL
  drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
  drbd: Fix allyesconfig build, fix recent commit
  drbd: switch from kmalloc() to kmalloc_array()
  drbd: abort drbd_start_resync if there is no connection
  drbd: move global variables to drbd namespace and make some static
  drbd: rename "usermode_helper" to "drbd_usermode_helper"
  drbd: fix race between handshake and admin disconnect/down
  drbd: fix potential deadlock when trying to detach during handshake
  drbd: A single dot should be put into a sequence.
  drbd: fix rmmod cleanup, remove _all_ debugfs entries
  drbd: Use setup_timer() instead of init_timer() to simplify the code.
  drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
  drbd: new disk-option disable-write-same
  drbd: Fix resource role for newly created resources in events2
  drbd: mark symbols static where possible
  drbd: Send P_NEG_ACK upon write error in protocol != C
  drbd: add explicit plugging when submitting batches
  drbd: change list_for_each_safe to while(list_first_entry_or_null)
  drbd: introduce drbd_recv_header_maybe_unplug
  ...
2017-09-07 11:59:42 -07:00
Jun Piao 964f14a0d3 ocfs2: clean up some dead code
clean up some unused functions and parameters.

Link: http://lkml.kernel.org/r/598A5E21.2080807@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:24 -07:00
Christoph Hellwig 74d46992e0 block: replace bi_bdev with a gendisk pointer and partitions index
This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 12:49:55 -06:00
piaojun 25b1c72e15 ocfs2: free 'dummy_sc' in sc_fop_release() to prevent memory leak
'sd->dbg_sock' is malloced in sc_common_open(), but not freed at the end
of sc_fop_release().

Link: http://lkml.kernel.org/r/594FB0A4.2050105@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:30 -07:00
Christoph Hellwig 4e4cbee93d block: switch bios to blk_status_t
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Geliang Tang d47736fafe fs/ocfs2/cluster: use offset_in_page() macro
Use offset_in_page() macro instead of open-coding.

Link: http://lkml.kernel.org/r/4dbc77ccaaed98b183cf4dba58a4fa325fd65048.1492758503.git.geliangtang@gmail.com
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:07 -07:00
Junxiao Bi 33496c3c3d ocfs2: o2hb: revert hb threshold to keep compatible
Configfs is the interface for ocfs2-tools to set configure to kernel and
$configfs_dir/cluster/$clustername/heartbeat/dead_threshold is the one
used to configure heartbeat dead threshold.  Kernel has a default value
of it but user can set O2CB_HEARTBEAT_THRESHOLD in /etc/sysconfig/o2cb
to override it.

Commit 45b997737a ("ocfs2/cluster: use per-attribute show and store
methods") changed heartbeat dead threshold name while ocfs2-tools did
not, so ocfs2-tools won't set this configurable and the default value is
always used.  So revert it.

Fixes: 45b997737a ("ocfs2/cluster: use per-attribute show and store methods")
Link: http://lkml.kernel.org/r/1490665245-15374-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:07 -07:00
Geliang Tang 667b8a37f3 fs/ocfs2/cluster: use setup_timer
Use setup_timer() instead of init_timer() to simplify the code.

Link: http://lkml.kernel.org/r/5e75bf07beb91e092d5aa36c36769949a480456a.1489060564.git.geliangtang@gmail.com
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:07 -07:00
Al Viro eea86b637a Merge branches 'uaccess.alpha', 'uaccess.arc', 'uaccess.arm', 'uaccess.arm64', 'uaccess.avr32', 'uaccess.bfin', 'uaccess.c6x', 'uaccess.cris', 'uaccess.frv', 'uaccess.h8300', 'uaccess.hexagon', 'uaccess.ia64', 'uaccess.m32r', 'uaccess.m68k', 'uaccess.metag', 'uaccess.microblaze', 'uaccess.mips', 'uaccess.mn10300', 'uaccess.nios2', 'uaccess.openrisc', 'uaccess.parisc', 'uaccess.powerpc', 'uaccess.s390', 'uaccess.score', 'uaccess.sh', 'uaccess.sparc', 'uaccess.tile', 'uaccess.um', 'uaccess.unicore32', 'uaccess.x86' and 'uaccess.xtensa' into work.uaccess 2017-04-26 12:06:59 -04:00
Al Viro e73a67f7cd don't open-code kernel_setsockopt()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-06 02:09:23 -04:00
David Howells cdfbabfb2f net: Work around lockdep limitation in sockets that use sockets
Lockdep issues a circular dependency warning when AFS issues an operation
through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem.

The theory lockdep comes up with is as follows:

 (1) If the pagefault handler decides it needs to read pages from AFS, it
     calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but
     creating a call requires the socket lock:

	mmap_sem must be taken before sk_lock-AF_RXRPC

 (2) afs_open_socket() opens an AF_RXRPC socket and binds it.  rxrpc_bind()
     binds the underlying UDP socket whilst holding its socket lock.
     inet_bind() takes its own socket lock:

	sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET

 (3) Reading from a TCP socket into a userspace buffer might cause a fault
     and thus cause the kernel to take the mmap_sem, but the TCP socket is
     locked whilst doing this:

	sk_lock-AF_INET must be taken before mmap_sem

However, lockdep's theory is wrong in this instance because it deals only
with lock classes and not individual locks.  The AF_INET lock in (2) isn't
really equivalent to the AF_INET lock in (3) as the former deals with a
socket entirely internal to the kernel that never sees userspace.  This is
a limitation in the design of lockdep.

Fix the general case by:

 (1) Double up all the locking keys used in sockets so that one set are
     used if the socket is created by userspace and the other set is used
     if the socket is created by the kernel.

 (2) Store the kern parameter passed to sk_alloc() in a variable in the
     sock struct (sk_kern_sock).  This informs sock_lock_init(),
     sock_init_data() and sk_clone_lock() as to the lock keys to be used.

     Note that the child created by sk_clone_lock() inherits the parent's
     kern setting.

 (3) Add a 'kern' parameter to ->accept() that is analogous to the one
     passed in to ->create() that distinguishes whether kernel_accept() or
     sys_accept4() was the caller and can be passed to sk_alloc().

     Note that a lot of accept functions merely dequeue an already
     allocated socket.  I haven't touched these as the new socket already
     exists before we get the parameter.

     Note also that there are a couple of places where I've made the accepted
     socket unconditionally kernel-based:

	irda_accept()
	rds_rcp_accept_one()
	tcp_accept_from_sock()

     because they follow a sock_create_kern() and accept off of that.

Whilst creating this, I noticed that lustre and ocfs don't create sockets
through sock_create_kern() and thus they aren't marked as for-kernel,
though they appear to be internal.  I wonder if these should do that so
that they use the new set of lock keys.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 18:23:27 -08:00
Ingo Molnar 5b3cc15aff sched/headers: Prepare to move the memalloc_noio_*() APIs to <linux/sched/mm.h>
Update the .c files that depend on these APIs.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:33 +01:00
Peter Zijlstra 2c935bc572 locking/atomic, kref: Add kref_read()
Since we need to change the implementation, stop exposing internals.

Provide kref_read() to read the current reference count; typically
used for debug messages.

Kills two anti-patterns:

	atomic_read(&kref->refcount)
	kref->refcount.counter

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 11:37:18 +01:00
Thomas Gleixner 2456e85535 ktime: Get rid of the union
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.

Get rid of the union and just keep ktime_t as simple typedef of type s64.

The conversion was done with coccinelle and some manual mopping up.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 17:21:22 +01:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Linus Torvalds 36869cb93d Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...
2016-12-13 10:19:16 -08:00
Deepa Dinamani c62c38f6b9 ocfs2: replace CURRENT_TIME macro
CURRENT_TIME is not y2038 safe.

Use y2038 safe ktime_get_real_seconds() here for timestamps.  struct
heartbeat_block's hb_seq and deletetion time are already 64 bits wide
and accommodate times beyond y2038.

Also use y2038 safe ktime_get_real_ts64() for on disk inode timestamps.
These are also wide enough to accommodate time64_t.

Link: http://lkml.kernel.org/r/1475365298-29236-1-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12 18:55:06 -08:00
Christoph Hellwig 70fd76140a block,fs: use REQ_* flags directly
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly.  Where applicable this also drops usage of the
bio_set_op_attrs wrapper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01 09:43:26 -06:00
Bhaktipriya Shridhar bf940776c0 fs/ocfs2/cluster: remove deprecated create_singlethread_workqueue()
The workqueue "o2net_wq" queues multiple work items viz
&old_sc->sc_shutdown_work, &sc->sc_rx_work, &sc->sc_connect_work which
require strict execution ordering.  Hence, an ordered dedicated
workqueue has been used.

WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure.

Link: http://lkml.kernel.org/r/ddc12e5766c79ba26f8a00d98049107f8a1d4866.1472590094.git.bhaktipriya96@gmail.com
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Junxiao Bi 63b52c4936 Revert "ocfs2: bump up o2cb network protocol version"
This reverts commit 38b52efd21 ("ocfs2: bump up o2cb network protocol
version").

This commit made rolling upgrade fail.  When one node is upgraded to new
version with this commit, the remaining nodes will fail to establish
connections to it, then the application like VMs on the remaining nodes
can't be live migrated to the upgraded one.  This will cause an outage.
Since negotiate hb timeout behavior didn't change without this commit,
so revert it.

Fixes: 38b52efd21 ("ocfs2: bump up o2cb network protocol version")
Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:17 -07:00
Linus Torvalds 0e06f5c0de Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc bits

 - ocfs2

 - most(?) of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
  thp: fix comments of __pmd_trans_huge_lock()
  cgroup: remove unnecessary 0 check from css_from_id()
  cgroup: fix idr leak for the first cgroup root
  mm: memcontrol: fix documentation for compound parameter
  mm: memcontrol: remove BUG_ON in uncharge_list
  mm: fix build warnings in <linux/compaction.h>
  mm, thp: convert from optimistic swapin collapsing to conservative
  mm, thp: fix comment inconsistency for swapin readahead functions
  thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
  shmem: split huge pages beyond i_size under memory pressure
  thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
  khugepaged: add support of collapse for tmpfs/shmem pages
  shmem: make shmem_inode_info::lock irq-safe
  khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
  thp: extract khugepaged from mm/huge_memory.c
  shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
  shmem: add huge pages support
  shmem: get_unmapped_area align huge page
  shmem: prepare huge= mount option and sysfs knob
  mm, rmap: account shmem thp pages
  ...
2016-07-26 19:55:54 -07:00
piaojun 7d65b27448 ocfs2/cluster: clean up unnecessary assignment for 'ret'
Clean up unnecessary assignment for 'ret'.

Link: http://lkml.kernel.org/r/578C61F6.4080403@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Mike Christie 0d16dcfed7 ocfs2: use bio op accessors
Separate the op from the rq_flag_bits and have ocfs2
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie 4e49ea4a3d block/fs/drivers: remove rw argument from submit_bio
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.

Signed-off-by: Mike Christie <mchristi@redhat.com>

Fixed up fs/ext4/crypto.c

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Junxiao Bi 38b52efd21 ocfs2: bump up o2cb network protocol version
Two new messages are added to support negotiating hb timeout.  Stop
nodes frmo talking an old version to mount as they will cause the
negotiation to fail.

Link: http://lkml.kernel.org/r/1464231615-27939-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Junxiao Bi 6633ca5731 ocfs2: o2hb: fix hb hung time
hr_last_timeout_start should be set as the last time where hb is
still OK.  When hb write timeout, hung time will be (jiffies -
hr_last_timeout_start).

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Junxiao Bi 88dbe98dc7 ocfs2: o2hb: don't negotiate if last hb fail
Sometimes io error is returned when storage is down for a while.  Like
for iscsi device, stroage is made offline when session timeout, and this
will make all io return -EIO.  For this case, nodes shouldn't do
negotiate timeout but should fence self.  So let nodes fence self when
o2hb_do_disk_heartbeat return an error, this is the same behavior with
o2hb without negotiate timer.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Junxiao Bi 1bd1290283 ocfs2: o2hb: add some user/debug log
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Junxiao Bi e76f8237a2 ocfs2: o2hb: add NEGOTIATE_APPROVE message
This message is used to re-queue write timeout timer and negotiate timer
when all nodes suffer a write hung to storage, this makes node not fence
self if storage down.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Junxiao Bi 34069b886f ocfs2: o2hb: add NEGO_TIMEOUT message
This message is sent to master node when non-master nodes's negotiate
timer expired.  Master node records these nodes in a bitmap which is
used to do write timeout timer re-queue decision.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Junxiao Bi e0cbb79805 ocfs2: o2hb: add negotiate timer
This series of patches is to fix the issue that when storage down, all
nodes will fence self due to write timeout.

With this patch set, all nodes will keep going until storage back
online, except if the following issue happens, then all nodes will do as
before to fence self.

1. io error got
2. network between nodes down
3. nodes panic

This patch (of 6):

When storage down, all nodes will fence self due to write timeout.  The
negotiate timer is designed to avoid this, with it node will wait until
storage up again.

Negotiate timer working in the following way:

1. The timer expires before write timeout timer, its timeout is half
   of write timeout now.  It is re-queued along with write timeout timer.
   If expires, it will send NEGO_TIMEOUT message to master node(node with
   lowest node number).  This message does nothing but marks a bit in a
   bitmap recording which nodes are negotiating timeout on master node.

2. If storage down, nodes will send this message to master node, then
   when master node finds its bitmap including all online nodes, it sends
   NEGO_APPROVL message to all nodes one by one, this message will
   re-queue write timeout timer and negotiate timer.  For any node doesn't
   receive this message or meets some issue when handling this message, it
   will be fenced.  If storage up at any time, o2hb_thread will run and
   re-queue all the timer, nothing will be affected by these two steps.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 14:49:37 -07:00
Linus Torvalds 087afe8aaf Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes and more updates from David Miller:

 1) Tunneling fixes from Tom Herbert and Alexander Duyck.

 2) AF_UNIX updates some struct sock bit fields with the socket lock,
    whereas setsockopt() sets overlapping ones with locking.  Seperate
    out the synchronized vs.  the AF_UNIX unsynchronized ones to avoid
    corruption.  From Andrey Ryabinin.

 3) Mount BPF filesystem with mount_nodev rather than mount_ns, from
    Eric Biederman.

 4) A couple kmemdup conversions, from Muhammad Falak R Wani.

 5) BPF verifier fixes from Alexei Starovoitov.

 6) Don't let tunneled UDP packets get stuck in socket queues, if
    something goes wrong during the encapsulation just drop the packet
    rather than signalling an error up the call stack.  From Hannes
    Frederic Sowa.

 7) SKB ref after free in batman-adv, from Florian Westphal.

 8) TCP iSCSI, ocfs2, rds, and tipc have to disable BH in it's TCP
    callbacks since the TCP stack runs pre-emptibly now.  From Eric
    Dumazet.

 9) Fix crash in fixed_phy_add, from Rabin Vincent.

10) Fix length checks in xen-netback, from Paul Durrant.

11) Fix mixup in KEY vs KEYID macsec attributes, from Sabrina Dubroca.

12) RDS connection spamming bug fixes from Sowmini Varadhan

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits)
  net: suppress warnings on dev_alloc_skb
  uapi glibc compat: fix compilation when !__USE_MISC in glibc
  udp: prevent skbs lingering in tunnel socket queues
  bpf: teach verifier to recognize imm += ptr pattern
  bpf: support decreasing order in direct packet access
  net: usb: ch9200: use kmemdup
  ps3_gelic: use kmemdup
  net:liquidio: use kmemdup
  bpf: Use mount_nodev not mount_ns to mount the bpf filesystem
  net: cdc_ncm: update datagram size after changing mtu
  tuntap: correctly wake up process during uninit
  intel: Add support for IPv6 IP-in-IP offload
  ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE
  RDS: TCP: Avoid rds connection churn from rogue SYNs
  RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp
  net: sock: move ->sk_shutdown out of bitfields.
  ipv6: Don't reset inner headers in ip6_tnl_xmit
  ip4ip6: Support for GSO/GRO
  ip6ip6: Support for GSO/GRO
  ipv6: Set features for IPv6 tunnels
  ...
2016-05-20 20:01:26 -07:00
Jun Piao aa6913dbd2 ocfs2: clean up unused parameter 'count' in o2hb_read_block_input()
Clean up unused parameter 'count' in o2hb_read_block_input().

Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 19:12:14 -07:00
Eric Dumazet e1daca289a ocfs2/cluster: block BH in TCP callbacks
TCP stack can now run from process context.

Use read_lock_bh() variant to restore previous assumption.

Fixes: 5413d1babe ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1d3 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19 11:36:49 -07:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Junxiao Bi 9e13f1f9de ocfs2: o2hb: fix double free bug
This is a regression issue and caused the following kernel panic when do
ocfs2 multiple test.

  BUG: unable to handle kernel paging request at 00000002000800c0
  IP: [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160
  PGD 7bbe5067 PUD 0
  Oops: 0000 [#1] SMP
  Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront
  CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-20160225 #1
  Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014
  task: ffff88007a521a80 ti: ffff88007aed0000 task.ti: ffff88007aed0000
  RIP: 0010:[<ffffffff81192978>]  [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160
  RSP: 0018:ffff88007aed3a48  EFLAGS: 00010282
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001991
  RDX: 0000000000001990 RSI: 00000000024000c0 RDI: 000000000001b330
  RBP: ffff88007aed3a98 R08: ffff88007d29b330 R09: 00000002000800c0
  R10: 0000000c51376d87 R11: ffff8800792cac38 R12: ffff88007cc30f00
  R13: 00000000024000c0 R14: ffffffff811b053f R15: ffff88007aed3ce7
  FS:  0000000000000000(0000) GS:ffff88007d280000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000002000800c0 CR3: 000000007aeb2000 CR4: 00000000000406e0
  Call Trace:
    __d_alloc+0x2f/0x1a0
    d_alloc+0x17/0x80
    lookup_dcache+0x8a/0xc0
    path_openat+0x3c3/0x1210
    do_filp_open+0x80/0xe0
    do_sys_open+0x110/0x200
    SyS_open+0x19/0x20
    do_syscall_64+0x72/0x230
    entry_SYSCALL64_slow_path+0x25/0x25
  Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63
  RIP   kmem_cache_alloc+0x78/0x160
  CR2: 00000002000800c0
  ---[ end trace 823969e602e4aaac ]---

Fixes: a4a1dfa4bb8b("ocfs2/cluster: fix memory leak in o2hb_region_release")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Linus Torvalds 364e8dd9d6 Configfs changes for the 4.6 merge window:
- A large patch from me to simplify setting up the list of default
    groups by actually implementing it as a list instead of an array.
  - a small Y2083 prep patch from Deepa Dinamani.  Probably doesn't matter
    on it's own, but it seems like he is trying to get rid of all CURRENT_TIME
    uses in file systems, which is a worthwhile goal.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6Cz6AAoJEA+eU2VSBFGDmNYP/AzJuVdkXjOkzmAl0SjwS0UC
 b/gTF0Z0jAmXX8QTf0NtdNajHweYyY4PVvyuUYojO/Y9bgJigRC6gHIUviq8TLhO
 JR1EUJ3RNoWFZSHeEGTM4q+kSg3GkZ83WixeBiMkIZo7QgPXU2YB0mzErpdcID3N
 +KVnoVU+asVQi656UIDNZ1SawTAGog+tIMIgnM4vmL0Dd+9yN4pYhAmRLLS0C83P
 DPci/oVx1a3IjWAkmz24qtb9ht/SA+IBwyFPltg/gdn5OgJL9Vr1naW5mkqMhoPF
 PUBfX9YYizMwNMYuchng6JqyWlZBjXFr6iqi401vFJcILeq27As5Kc9adfDOEvVC
 V/dWCmTyMlHX507t+lC7kTa6OaHAZKA5scCHA6dgpQIvGfiaMNNu7MW8C6p0HqwY
 rf7na7S2fAu5zCyIRVPK//YMNbRHh2AoclzpK7Sw0NCV5jBlXZOdDJcSb4jQsVF7
 Yy84EqcebvF4ocaFRzwA/ZHNxz65l5Qu7brmOu6pTliQuQED1fop5z92RXkw2e9y
 rSIgzMCL5IoAUkYtoO1jzAQXzyySAb3QDpwCaBdZLzN4MbRF/dUxZDkOePKTaVft
 ckNXj5AVzvLYlpkmkhQ+bqsh91ayFH2/gw9Kt38i1yjzNLhsccZwq9ja5ifPlHLQ
 nOFiane31yp3Zhac8drb
 =9HqT
 -----END PGP SIGNATURE-----

Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs

Pull configfs updates from Christoph Hellwig:

 - A large patch from me to simplify setting up the list of default
   groups by actually implementing it as a list instead of an array.

 - a small Y2083 prep patch from Deepa Dinamani.  Probably doesn't
   matter on it's own, but it seems like he is trying to get rid of all
   CURRENT_TIME uses in file systems, which is a worthwhile goal.

* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
  configfs: switch ->default groups to a linked list
  configfs: Replace CURRENT_TIME by current_fs_time()
2016-03-17 16:25:46 -07:00
jiangyiwen 4d548f61d6 ocfs2/cluster: replace the interrupt safe spinlocks with common ones
There actually no hardware or software interrupts in the context which
using o2hb_live_lock, so we don't need to worry about race conditions
caused by irq/softirq with spinlock held.  Turning off irq is not good
for system performance after all.  Just replace them with a non
interrupt safe function.

Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Christoph Hellwig 1ae1602de0 configfs: switch ->default groups to a linked list
Replace the current NULL-terminated array of default groups with a linked
list.  This gets rid of lots of nasty code to size and/or dynamically
allocate the array.

While we're at it also provide a conveniant helper to remove the default
groups.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felipe Balbi <balbi@kernel.org>		[drivers/usb/gadget]
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
2016-03-06 16:11:24 +01:00
Joseph Qi a4a1dfa4bb ocfs2/cluster: fix memory leak in o2hb_region_release
o2hb_region_release currently doesn't free o2hb_debug_buf
hr_db_elapsed_time and hr_db_pinned malloced in o2hb_debug_create.  Also
we should call debugfs_remove before freeing its data, to prevent the risk
accessing debugfs rightly after its data has been freed.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jiufei Xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-03 08:28:43 -08:00
Linus Torvalds 71e4634e00 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Introduce configfs support for unlocked configfs_depend_item()
     (krzysztof + andrezej)
   - Conversion of usb-gadget target driver to new function registration
     interface (andrzej + sebastian)
   - Enable qla2xxx FC target mode support for Extended Logins (himansu +
     giridhar)
   - Enable qla2xxx FC target mode support for Exchange Offload (himansu +
     giridhar)
   - Add qla2xxx FC target mode irq affinity notification + selective
     command queuing.  (quinn + himanshu)
   - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
     nab)
   - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
     proper se_session->sess_kref + target_get_session() usage.  (hch +
     sagi + nab)
   - Fix long-standing race between se_node_acl->acl_kref get and
     get_initiator_node_acl() lookup.  (hch + nab)
   - Fix target/user block-size handling, and make sure netlink reaches
     all network namespaces (sheng + andy)

  Note there is an outstanding bug-fix series for remote I_T nexus port
  TMR LUN_RESET has been posted and still being tested, and will likely
  become post -rc1 material at this point"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
  scsi: qla2xxxx: avoid type mismatch in comparison
  target/user: Make sure netlink would reach all network namespaces
  target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
  target: Convert ACL change queue_depth se_session reference usage
  iscsi-target: Fix potential dead-lock during node acl delete
  ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Wait for command completion before freeing a session
  target: Fix a memory leak in target_dev_lba_map_store()
  target: Support aborting tasks with a 64-bit tag
  usb/gadget: Remove set-but-not-used variables
  target: Remove an unused variable
  target: Fix indentation in target_core_configfs.c
  target/user: Allow user to set block size before enabling device
  iser-target: Fix non negative ERR_PTR isert_device_get usage
  target/fcoe: Add tag support to tcm_fc
  qla2xxx: Check for online flag instead of active reset when transmitting responses
  qla2xxx: Set all queues to 4k
  qla2xxx: Disable ZIO at start time.
  qla2xxx: Move atioq to a different lock to reduce lock contention
  ...
2016-01-20 17:20:53 -08:00
Junxiao Bi a84ac334dc ocfs2: o2hb: increase unsteady iterations
When run multiple xattr test of ocfs2-test on a three-nodes cluster,
mount failed sometimes with the following message.

  o2hb: Unable to stabilize heartbeart on region D18B775E758D4D80837E8CF3D086AD4A (xvdb)

Stabilize heartbeat depends on the timing order to mount ocfs2 from
cluster nodes and how fast the tcp connections are established.  So
increase unsteady interations to leave more time for it.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 16:00:49 -08:00
Krzysztof Opasiak 9a9e3415ed fs: configfs: Drop unused parameter from configfs_undepend_item()
subsys parameter is never used by configfs_undepend_item()
so there is no point in passing it to this function.

Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-20 18:03:57 -08:00
Linus Torvalds 9aa3d651a9 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "This series contains HCH's changes to absorb configfs attribute
  ->show() + ->store() function pointer usage from it's original
  tree-wide consumers, into common configfs code.

  It includes usb-gadget, target w/ drivers, netconsole and ocfs2
  changes to realize the improved simplicity, that now renders the
  original include/target/configfs_macros.h CPP magic for fabric drivers
  and others, unnecessary and obsolete.

  And with common code in place, new configfs attributes can be added
  easier than ever before.

  Note, there are further improvements in-flight from other folks for
  v4.5 code in configfs land, plus number of target fixes for post -rc1
  code"

In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").

This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull.  As Alexander says about
that patch:

 "There's no need to keep an extra wrapper structure per item and the
  awkward show_attribute/store_attribute item ops are no longer needed.

  This patch converts policy code to the new api, all the while making
  the code quite a bit smaller and easier on the eyes.

  Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"

That patch was folded into the merge so that the tree should be fully
bisectable.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
  configfs: remove old API
  ocfs2/cluster: use per-attribute show and store methods
  ocfs2/cluster: move locking into attribute store methods
  netconsole: use per-attribute show and store methods
  target: use per-attribute show and store methods
  spear13xx_pcie_gadget: use per-attribute show and store methods
  dlm: use per-attribute show and store methods
  usb-gadget/f_serial: use per-attribute show and store methods
  usb-gadget/f_phonet: use per-attribute show and store methods
  usb-gadget/f_obex: use per-attribute show and store methods
  usb-gadget/f_uac2: use per-attribute show and store methods
  usb-gadget/f_uac1: use per-attribute show and store methods
  usb-gadget/f_mass_storage: use per-attribute show and store methods
  usb-gadget/f_sourcesink: use per-attribute show and store methods
  usb-gadget/f_printer: use per-attribute show and store methods
  usb-gadget/f_midi: use per-attribute show and store methods
  usb-gadget/f_loopback: use per-attribute show and store methods
  usb-gadget/ether: use per-attribute show and store methods
  usb-gadget/f_acm: use per-attribute show and store methods
  usb-gadget/f_hid: use per-attribute show and store methods
  ...
2015-11-13 20:04:17 -08:00
Joseph Qi 0986fe9b50 ocfs2: fix race between mount and delete node/cluster
There is a race case between mount and delete node/cluster, which will
lead o2hb_thread to malfunctioning dead loop.

    o2hb_thread
    {
        o2nm_depend_this_node();
        <<<<<< race window, node may have already been deleted, and then
               enter the loop, o2hb thread will be malfunctioning
               because of no configured nodes found.
        while (!kthread_should_stop() &&
               !reg->hr_unclean_stop && !reg->hr_aborted_start) {
    }

So check the return value of o2nm_depend_this_node() is needed.  If node
has been deleted, do not enter the loop and let mount fail.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Christoph Hellwig 45b997737a ocfs2/cluster: use per-attribute show and store methods
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-10-13 22:17:55 -07:00
Christoph Hellwig 13a83fc909 ocfs2/cluster: move locking into attribute store methods
The test and separate set bit scheme was racy to start with, so move to do
a test_and_set_bit after doing the earlier error checks inside the actual
store methods.  Also remove the locking for the local attribute which
already has a different scheme to synchronize.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-10-13 22:17:53 -07:00
Tina Ruchandani 40476b8294 ocfs2: use 64bit variables to track heartbeat time
o2hb_elapsed_msecs computes the time taken for a disk heartbeat.
'struct timeval' variables are used to store start and end times.  On
32-bit systems, the 'tv_sec' component of 'struct timeval' will overflow
in year 2038 and beyond.

This patch solves the overflow with the following:

1. Replace o2hb_elapsed_msecs using 'ktime_t' values to measure start
   and end time, and built-in function 'ktime_ms_delta' to compute the
   elapsed time.  ktime_get_real() is used since the code prints out the
   wallclock time.

2. Changes format string to print time as a single 64-bit nanoseconds
   value ("%lld") instead of seconds and microseconds.  This simplifies
   the code since converting ktime_t to that format would need expensive
   computation.  However, the debug log string is less readable than the
   previous format.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Suggested by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 16:54:41 -07:00
Christophe JAILLET 372a447c4b ocfs2: do not log twice error messages
'o2hb_map_slot_data' and 'o2hb_populate_slot_data' are called from only
one place, in 'o2hb_region_dev_write'.  Return value is checked and
'mlog_errno' is called to log a message if it is not 0.

So there is no need to call 'mlog_errno' directly within these functions.
This would result on logging the message twice.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 16:54:41 -07:00
Christoph Hellwig 4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00