Commit Graph

31 Commits

Author SHA1 Message Date
Christoph Hellwig 4e34e719e4 fs: take the ACL checks to common code
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss.  This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25 14:30:23 -04:00
Josef Bacik 02c24a8218 fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:59 -04:00
Linus Torvalds e8a89cebdb Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (79 commits)
  mtd: Remove obsolete <mtd/compatmac.h> include
  mtd: Update copyright notices
  jffs2: Update copyright notices
  mtd-physmap: add support users can assign the probe type in board files
  mtd: remove redwood map driver
  mxc_nand: Add v3 (i.MX51) Support
  mxc_nand: support 8bit ecc
  mxc_nand: fix correct_data function
  mxc_nand: add V1_V2 namespace to registers
  mxc_nand: factor out a check_int function
  mxc_nand: make some internally used functions overwriteable
  mxc_nand: rework get_dev_status
  mxc_nand: remove 0xe00 offset from registers
  mtd: denali: Add multi connected NAND support
  mtd: denali: Remove set_ecc_config function
  mtd: denali: Remove unuseful code in get_xx_nand_para functions
  mtd: denali: Remove device_info_tag structure
  mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip
  mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips
  mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips
  ...

Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to
redwood driver removal.
2010-08-10 11:49:21 -07:00
David Woodhouse 6088c05877 jffs2: Update copyright notices
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-08-08 14:15:22 +01:00
Christoph Hellwig 7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Linus Torvalds 18f4c64477 jffs2/jfs/xfs: switch over to 'check_acl' rather than 'permission()'
This avoids an indirect call in the VFS for each path component lookup.

Well, at least as long as you own the directory in question, and the ACL
check is unnecessary.

Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-08 11:09:04 -07:00
Anders Grafström 57ca7deb06 jffs2: Fix return value from jffs2_do_readpage_nolock()
This fixes "kernel BUG at fs/jffs2/file.c:251!".
This pseudocode hopefully illustrates the scenario that triggers it:

jffs2_write_begin {
     jffs2_do_readpage_nolock {
         jffs2_read_inode_range {
             jffs2_read_dnode {
                 Data CRC 33c102e9 != calculated CRC 0ef77e7b for node at 005d42e4
                 return -EIO;
             }
         }
         ClearPageUptodate(pg);
         return 0;
     }
}

jffs2_write_end {
     BUG_ON(!PageUptodate(pg));
}

Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-04 12:13:06 +01:00
Nick Piggin 54566b2c15 fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened.  They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim.  This bug could
cause filesystem deadlocks.

The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called.  It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock.  The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.

Add a new flag for write_begin, AOP_FLAG_NOFS.  Filesystems can now act on
this flag in their write_begin function.  Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).

This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg.  ocfs2_alloc_write_ctxt, for a
random example).

[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
  untouched to the grab_cache_page_write_begin() function.  That
  just simplifies everybody, and may even allow future expansion of the
  logic.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Stoyan Gaydarov 0533400b78 [JFFS2] Use .unlocked_ioctl
This changes the .ioctl to the .unlocked_ioctl version.

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11 18:33:42 +01:00
David Woodhouse ced2207036 [JFFS2] semaphore->mutex conversion
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 15:13:40 +01:00
Alexey Korolev abe2f41430 JFFS2 Fix of panics caused by wrong condition for hole frag creation in write_begin
This fixes a regression introduced in commit
205c109a7a when switching to
write_begin/write_end operations in JFFS2.

The page offset is miscalculated, leading to corruption of the fragment
lists and subsequently to memory corruption and panics.

[ Side note: the bug is a fairly direct result of the naming.  Nick was
  likely misled by the use of "offs", since we tend to use the notion of
  "offset" not as an absolute position, but as an offset _within_ a page
  or allocation.

  Alternatively, a "pgoff_t" is a page index, but not a byte offset -
  our VM naming can be a bit confusing.

  So in this case, a VM person would likely have called this a "pos",
  not an "offs", or perhaps talked about byte offsets rather than page
  offsets (since it's counted in bytes, not pages).    - Linus ]

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-14 15:43:14 -07:00
Nick Piggin 2a754b51aa [JFFS2] Fix return value from jffs2_write_end()
jffs2_write_end() is sometimes passing back a "written" length greater 
than the length we passed into it, leading to a BUG at mm/filemap.c:1749 
when used with unionfs.

It happens because we actually write more than was requested, to reduce 
log fragmentation. These "longer" writes are fine, but they shouldn't 
get propagated back to the vm/vfs.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-22 10:24:44 +01:00
Nick Piggin 205c109a7a jffs2: convert to new aops
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:57 -07:00
Jens Axboe 5ffc4ef45b sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:04:13 +02:00
David Woodhouse c00c310eac [JFFS2] Tidy up licensing/copyright boilerplate.
In particular, remove the bit in the LICENCE file about contacting
Red Hat for alternative arrangements. Their errant IS department broke
that arrangement a long time ago -- the policy of collecting copyright
assignments from contributors came to an end when the plug was pulled on
the servers hosting the project, without notice or reason.

We do still dual-license it for use with eCos, with the GPL+exception
licence approved by the FSF as being GPL-compatible. It's just that nobody
has the right to license it differently.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 14:16:47 +01:00
Arjan van de Ven 92e1d5be91 [PATCH] mark struct inode_operations const 2
Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
Badari Pulavarty 543ade1fc9 [PATCH] Streamline generic_file_* interfaces and filemap cleanups
This patch cleans up generic_file_*_read/write() interfaces.  Christoph
Hellwig gave me the idea for this clean ups.

In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods.  This allows us
to cleanup all variants of generic_file_* routines.

Final available interfaces:

generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler

__generic_file_aio_write_nolock() - internal worker routine

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:28 -07:00
Christoph Hellwig f5e54d6e53 [PATCH] mark address_space_operations const
Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28 14:59:04 -07:00
David Woodhouse 9fe4854cd1 [JFFS2] Remove flash offset argument from various functions.
We don't need the upper layers to deal with the physical offset. It's
_always_ c->nextblock->offset + c->sector_size - c->nextblock->free_size
so we might as well just let the actual write functions deal with that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-23 00:38:06 +01:00
KaiGai Kohei 20a92fc74c Merge git://git.infradead.org/mtd-2.6 2006-05-19 00:43:53 +09:00
David Woodhouse cf5eba5334 [JFFS2] Reduce excessive node count for syslog files.
We currently get fairly poor behaviour with files which get many short
writes, such as system logs. This is because we end up with many tiny
data nodes, and the rbtree gets massive. None of these nodes are
actually obsolete, so they are counted as 'clean' space. Eraseblocks can
be entirely full of these nodes (which are REF_NORMAL instead of
REF_PRISTINE), and still they count entirely towards 'used_size' and the
eraseblocks can sit on the clean_list for a long time without being
picked for GC.

One way to alleviate this in the long term is to account REF_NORMAL
space separately from REF_PRISTINE space, rather than counting them both
towards used_size. Then these eraseblocks can be picked for GC and the
offending nodes will be garbage collected.

The short-term fix, though -- which probably makes sense even if we do
eventually implement the above -- is to merge these nodes as they're
written. When we write the last byte in a page, write the _whole_ page.
This obsoletes the earlier nodes in the page _immediately_ and we don't
even need to wait for the garbage collection to do it.

Original implementation from Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-14 04:06:24 +01:00
KaiGai Kohei aa98d7cf59 [JFFS2][XATTR] XATTR support on JFFS2 (version. 5)
This attached patches provide xattr support including POSIX-ACL and
SELinux support on JFFS2 (version.5).

There are some significant differences from previous version posted
at last December.
The biggest change is addition of EBS(Erase Block Summary) support.
Currently, both kernel and usermode utility (sumtool) can recognize
xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype.

In addition, some bugs are fixed.
- A potential race condition was fixed.
- Unexpected fail when updating a xattr by same name/value pair was fixed.
- A bug when removing xattr name/value pair was fixed.

The fundamental structures (such as using two new nodetypes and exclusion
mechanism by rwsem) are unchanged. But most of implementation were reviewed
and updated if necessary.
Espacially, we had to change several internal implementations related to
load_xattr_datum() to avoid a potential race condition.

[1/2] xattr_on_jffs2.kernel.version-5.patch
[2/2] xattr_on_jffs2.utils.version-5.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-13 15:09:47 +09:00
Arjan van de Ven 4b6f5d20b0 [PATCH] Make most file operations structs in fs/ const
This is a conversion to make the various file_operations structs in fs/
const.  Basically a regexp job, with a few manual fixups

The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:06 -08:00
Thomas Gleixner 182ec4eee3 [JFFS2] Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 14:18:56 +01:00
Todd Poynor 4fc67fbe52 [JFFS2] Return 0, not number of bytes written, for success at commit_write
Some callers to block-layer commit_write function treat non-zero return as
error, notably the loopback mount driver sometimes used in conjunction with
JFFS2 on NAND flash for bad block avoidance, etc.  Return zero for success
as do various other commit_write functions.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:14:16 +01:00
Ferenc Havasi e631ddba58 [JFFS2] Add erase block summary support (mount time improvement)
The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of every (closed) erase block. It is
no longer necessary to scan all nodes separetly (and read all pages of them)
just read this "small" summary, where every information is stored which is
needed at mount time.

This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During
the mount process if there is no summary info the orignal scan process will
be executed. EBS works with NAND and NOR flashes, too.

There is a user space tool called sumtool to generate this summary
information for a JFFS2 image.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:29:48 +01:00
Adrian Bunk 5e1efe4931 [PATCH] jffs/jffs2: remove wrong function prototypes
This patch removes prototypes for the generic_file_open and
generic_file_llseek functions.

Besides being superfluous because they are already present in fs.h, they
were also wrong because the actual functions aren't weak functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:29 -07:00
David Woodhouse 265489f01d [JFFS2] Remove compatibilty cruft for ancient kernels
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-07-06 16:12:09 +02:00
Matt Mackall cd7619d6bf [PATCH] Exterminate PAGE_BUG
Remove PAGE_BUG - repalce it with BUG and BUG_ON.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:01 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00