Warn if the balance goes below zero, which appears to be unlikely
though. Otherwise cleans up the code a bit.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since daivd did the work that force us to use readonly snapshot,
we can safely remove transaction protection from btrfs send.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We met the following oops when doing space balance:
kobject (ffff88081b590278): tried to init an initialized object, something is seriously wrong.
...
Call Trace:
[<ffffffff81937262>] dump_stack+0x49/0x5f
[<ffffffff8137d259>] kobject_init+0x89/0xa0
[<ffffffff8137d36a>] kobject_init_and_add+0x2a/0x70
[<ffffffffa009bd79>] ? clear_extent_bit+0x199/0x470 [btrfs]
[<ffffffffa005e82c>] __link_block_group+0xfc/0x120 [btrfs]
[<ffffffffa006b9db>] btrfs_make_block_group+0x24b/0x370 [btrfs]
[<ffffffffa00a899b>] __btrfs_alloc_chunk+0x54b/0x7e0 [btrfs]
[<ffffffffa00a8c6f>] btrfs_alloc_chunk+0x3f/0x50 [btrfs]
[<ffffffffa0060123>] do_chunk_alloc+0x363/0x440 [btrfs]
[<ffffffffa00633d4>] btrfs_check_data_free_space+0x104/0x310 [btrfs]
[<ffffffffa0069f4d>] btrfs_write_dirty_block_groups+0x48d/0x600 [btrfs]
[<ffffffffa007aad4>] commit_cowonly_roots+0x184/0x250 [btrfs]
...
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o nospace_cache <dev> <mnt>
# btrfs balance start <mnt>
# dd if=/dev/zero of=<mnt>/tmpfile bs=1M count=1
The reason of this problem is that we initialized the raid kobject when we added
a block group into a empty raid list. As we know, when we mounted a btrfs filesystem,
the raid list was empty, we would initialize the raid kobject when we added the first
block group. But if there was not data stored in the block group, the block group
would be freed when doing balance, and the raid list would be empty. And then if we
allocated a new block group and added it into the raid list, we would initialize
the raid kobject again, the oops happened.
Fix this problem by initializing the raid kobject just when mounting the fs.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reported-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
All the subvolues that are involved in send must be read-only during the
whole operation. The ioctl SUBVOL_SETFLAGS could be used to change the
status to read-write and the result of send stream is undefined if the
data change unexpectedly.
Fix that by adding a refcount for all involved roots and verify that
there's no send in progress during SUBVOL_SETFLAGS ioctl call that does
read-only -> read-write transition.
We need refcounts because there are no restrictions on number of send
parallel operations currently run on a single subvolume, be it source,
parent or one of the multiple clone sources.
Kernel is silent when the RO checks fail and returns EPERM. The same set
of checks is done already in userspace before send starts.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Unused since ed2590953b
"Btrfs: stop using vfs_read in send".
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove ifdefed code:
- tlv_put for 8, 16 and 32, add a generic tempalte if needed in future
- tlv_put_timespec - the btrfs_timespec fields are used
- fs_path_remove obsoleted long ago
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
While running btrfs/004 from xfstests, after 503 iterations, dmesg reported
a deadlock between tasks iterating inode refs and tasks running delayed inodes
(during a transaction commit).
It turns out that iterating inode refs implies doing one tree search and
release all nodes in the path except the leaf node, and then passing that
leaf node to btrfs_ref_to_path(), which in turn does another tree search
without releasing the lock on the leaf node it received as parameter.
This is a problem when other task wants to write to the btree as well and
ends up updating the leaf that is read locked - the writer task locks the
parent of the leaf and then blocks waiting for the leaf's lock to be
released - at the same time, the task executing btrfs_ref_to_path()
does a second tree search, without releasing the lock on the first leaf,
and wants to access a leaf (the same or another one) that is a child of
the same parent, resulting in a deadlock.
The trace reported by lockdep follows.
[84314.936373] INFO: task fsstress:11930 blocked for more than 120 seconds.
[84314.936381] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[84314.936383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84314.936386] fsstress D ffff8806e1bf8000 0 11930 11926 0x00000000
[84314.936393] ffff8804d6d89b78 0000000000000046 ffff8804d6d89b18 ffffffff810bd8bd
[84314.936399] ffff8806e1bf8000 ffff8804d6d89fd8 ffff8804d6d89fd8 ffff8804d6d89fd8
[84314.936405] ffff880806308000 ffff8806e1bf8000 ffff8804d6d89c08 ffff8804deb8f190
[84314.936410] Call Trace:
[84314.936421] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
[84314.936428] [<ffffffff81774269>] schedule+0x29/0x70
[84314.936451] [<ffffffffa0715bf5>] btrfs_tree_lock+0x75/0x270 [btrfs]
[84314.936457] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
[84314.936470] [<ffffffffa06ba231>] btrfs_search_slot+0x7f1/0x930 [btrfs]
[84314.936489] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
[84314.936504] [<ffffffffa06d2e1f>] btrfs_lookup_inode+0x2f/0xa0 [btrfs]
[84314.936510] [<ffffffff810bd6ef>] ? trace_hardirqs_on_caller+0x1f/0x1e0
[84314.936528] [<ffffffffa073173c>] __btrfs_update_delayed_inode+0x4c/0x1d0 [btrfs]
[84314.936543] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
[84314.936558] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
[84314.936573] [<ffffffffa0731c82>] __btrfs_run_delayed_items+0x192/0x1e0 [btrfs]
[84314.936589] [<ffffffffa0731d03>] btrfs_run_delayed_items+0x13/0x20 [btrfs]
[84314.936604] [<ffffffffa06dbcd4>] btrfs_flush_all_pending_stuffs+0x24/0x80 [btrfs]
[84314.936620] [<ffffffffa06ddc13>] btrfs_commit_transaction+0x223/0xa20 [btrfs]
[84314.936630] [<ffffffffa06ae5ae>] btrfs_sync_fs+0x6e/0x110 [btrfs]
[84314.936635] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60
[84314.936639] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60
[84314.936643] [<ffffffff811d0b70>] sync_fs_one_sb+0x20/0x30
[84314.936648] [<ffffffff811a3541>] iterate_supers+0xf1/0x100
[84314.936652] [<ffffffff811d0c45>] sys_sync+0x55/0x90
[84314.936658] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
[84314.936660] INFO: lockdep is turned off.
[84314.936663] INFO: task btrfs:11955 blocked for more than 120 seconds.
[84314.936666] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[84314.936668] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84314.936670] btrfs D ffff880541729a88 0 11955 11608 0x00000000
[84314.936674] ffff880541729a38 0000000000000046 ffff8805417299d8 ffffffff810bd8bd
[84314.936680] ffff88075430c8a0 ffff880541729fd8 ffff880541729fd8 ffff880541729fd8
[84314.936685] ffffffff81c104e0 ffff88075430c8a0 ffff8804de8b00b8 ffff8804de8b0000
[84314.936690] Call Trace:
[84314.936695] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
[84314.936700] [<ffffffff81774269>] schedule+0x29/0x70
[84314.936717] [<ffffffffa0715815>] btrfs_tree_read_lock+0xd5/0x140 [btrfs]
[84314.936721] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
[84314.936733] [<ffffffffa06ba201>] btrfs_search_slot+0x7c1/0x930 [btrfs]
[84314.936746] [<ffffffffa06bd505>] btrfs_find_item+0x55/0x160 [btrfs]
[84314.936763] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs]
[84314.936780] [<ffffffffa073c9ca>] btrfs_ref_to_path+0xba/0x1e0 [btrfs]
[84314.936797] [<ffffffffa06f9719>] ? release_extent_buffer+0xb9/0xe0 [btrfs]
[84314.936813] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs]
[84314.936830] [<ffffffffa073cb50>] inode_to_path+0x60/0xd0 [btrfs]
[84314.936846] [<ffffffffa073d365>] paths_from_inode+0x115/0x3c0 [btrfs]
[84314.936851] [<ffffffff8118dd44>] ? kmem_cache_alloc_trace+0x114/0x200
[84314.936868] [<ffffffffa0714494>] btrfs_ioctl+0xf14/0x2030 [btrfs]
[84314.936873] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50
[84314.936877] [<ffffffff8116598f>] ? handle_mm_fault+0x34f/0xb00
[84314.936882] [<ffffffff81075563>] ? up_read+0x23/0x40
[84314.936886] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0
[84314.936892] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570
[84314.936896] [<ffffffff81776e23>] ? error_sti+0x5/0x6
[84314.936901] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0
[84314.936906] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13
[84314.936910] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0
[84314.936915] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[84314.936920] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
[84314.936922] INFO: lockdep is turned off.
[84434.866873] INFO: task btrfs-transacti:11921 blocked for more than 120 seconds.
[84434.866881] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[84434.866883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84434.866886] btrfs-transacti D ffff880755b6a478 0 11921 2 0x00000000
[84434.866893] ffff8800735b9ce8 0000000000000046 ffff8800735b9c88 ffffffff810bd8bd
[84434.866899] ffff8805a1b848a0 ffff8800735b9fd8 ffff8800735b9fd8 ffff8800735b9fd8
[84434.866904] ffffffff81c104e0 ffff8805a1b848a0 ffff880755b6a478 ffff8804cece78f0
[84434.866910] Call Trace:
[84434.866920] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
[84434.866927] [<ffffffff81774269>] schedule+0x29/0x70
[84434.866948] [<ffffffffa06dd2ef>] wait_current_trans.isra.33+0xbf/0x120 [btrfs]
[84434.866954] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
[84434.866970] [<ffffffffa06dec18>] start_transaction+0x388/0x5a0 [btrfs]
[84434.866985] [<ffffffffa06db9b5>] ? transaction_kthread+0xb5/0x280 [btrfs]
[84434.866999] [<ffffffffa06dee97>] btrfs_attach_transaction+0x17/0x20 [btrfs]
[84434.867012] [<ffffffffa06dba9e>] transaction_kthread+0x19e/0x280 [btrfs]
[84434.867026] [<ffffffffa06db900>] ? open_ctree+0x2260/0x2260 [btrfs]
[84434.867030] [<ffffffff81070dad>] kthread+0xed/0x100
[84434.867035] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190
[84434.867040] [<ffffffff8177ee6c>] ret_from_fork+0x7c/0xb0
[84434.867044] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Chris introduced hleper function read_csums() and this function
has been removed, but we forgot to remove its corresponding comments.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
It's not used anywhere, so just drop it.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
fs/btrfs/file.c: In function ‘prepare_pages.isra.18’:
fs/btrfs/file.c:1265:6: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have commited transaction before, remove redundant filemap writting and
waiting here, it can speed up balance relocation process.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Clean up btrfs_lookup_dentry() to never return NULL, but PTR_ERR(-ENOENT)
instead. This keeps the return value convention consistent.
Callers who use btrfs_lookup_dentry() require a trivial update.
create_snapshot() in particular looks like it can also lose a BUG_ON(!inode)
which is not really needed - there seems less harm in returning ENOENT to
userspace at that point in the stack than there is to crash the machine.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
In ctree.c:tree_mod_log_set_node_key() we were calling
__tree_mod_log_insert_key() even when the modification doesn't need
to be logged. This would allocate a tree_mod_elem structure, fill it
and pass it to __tree_mod_log_insert(), which would just acquire
the tree mod log write lock and then free the tree_mod_elem structure
and return (that is, a no-op).
Therefore call tree_mod_log_insert() instead of __tree_mod_log_insert()
which just returns immediately if the modification doesn't need to be
logged (without allocating the structure, fill it, acquire write lock,
free structure).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I need to create a fake tree to test qgroups and I don't want to have to setup a
fake btree_inode. The fact is we only use the radix tree for the fs_info, so
everybody else who allocates an extent_io_tree is just wasting the space anyway.
This patch moves the radix tree and its lock into btrfs_fs_info so there is less
stuff I have to fake to do qgroup sanity tests. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
For creating a dummy in-memory btree I need to be able to use the radix tree to
keep track of the buffers like normal extent buffers. With dummy buffers we
skip the radix tree step, and we still want to do that for the tree mod log
dummy buffers but for my test buffers we need to be able to remove them from the
radix tree like normal. This will give me a way to do that. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I need to add infrastructure to allocate dummy extent buffers for running sanity
tests, and to do this I need to not have to worry about having an
address_mapping for an io_tree, so just fix up the places where we assume that
all io_tree's have a non-NULL ->mapping. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently when finding the leaf to insert a key into a btree, if the
leaf doesn't have enough space to store the item we attempt to move
off some items from our leaf to its right neighbor leaf, and if this
fails to create enough free space in our leaf, we try to move off more
items to the left neighbor leaf as well.
When trying to move off items to the right neighbor leaf, if it has
enough room to store the new key but not not enough room to move off
at least one item from our target leaf, __push_leaf_right returns 1 and
we have to attempt to move items to the left neighbor (push_leaf_left
function) without touching the right neighbor leaf.
For the case where the right leaf has enough room to store at least 1
item from our leaf, we end up modifying (and dirtying) both our leaf
and the right leaf. This is non-optimal for the case where the new key
is greater than any key in our target leaf because it can be inserted at
slot 0 of the right neighbor leaf and we don't need to touch our leaf
at all nor to attempt to move off items to the left neighbor leaf.
Therefore this change just selects the right neighbor leaf as our new
target leaf if it has enough room for the new key without modifying our
initial target leaf - we do this only if the new key is higher than any
key in the initial target leaf.
While running the following test, push_leaf_right was called by split_leaf
4802 times. Out of those 4802 calls, for 2571 calls (53.5%) we hit this
special case (right leaf has enough room and new key is higher than any key
in the initial target leaf).
Test:
sysbench --test=fileio --file-num=512 --file-total-size=5G \
--file-test-mode=[seqwr|rndwr] --num-threads=512 --file-block-size=8192 \
--max-requests=100000 --file-io-mode=sync [prepare|run]
Results:
sequential writes
Throughput before this change: 65.71Mb/sec (average of 10 runs)
Throughput after this change: 66.58Mb/sec (average of 10 runs)
random writes
Throughput before this change: 10.75Mb/sec (average of 10 runs)
Throughput after this change: 11.56Mb/sec (average of 10 runs)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Just wrap same code into one function scrub_blocked_if_needed().
This make a change that we will move waiting (@workers_pending = 0)
before we can wake up commiting transaction(atomic_inc(@scrub_paused)),
we must take carefully to not deadlock here.
Thread 1 Thread 2
|->btrfs_commit_transaction()
|->set trans type(COMMIT_DOING)
|->btrfs_scrub_paused()(blocked)
|->join_transaction(blocked)
Move btrfs_scrub_paused() before setting trans type which means we can
still join a transaction when commiting_transaction is blocked.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Suggested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We came a race condition when scrubbing superblocks, the story is:
In commiting transaction, we will update @last_trans_commited after
writting superblocks, if scrubber start after writting superblocks
and before updating @last_trans_commited, generation mismatch happens!
We fix this by checking @scrub_pause_req, and we won't start a srubber
until commiting transaction is finished.(after btrfs_scrub_continue()
finished.)
Reported-by: Sebastian Ochmann <ochmann@informatik.uni-bonn.de>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
fs/btrfs/send.c:2190:9: warning: incorrect type in argument 3 (different base types)
fs/btrfs/send.c:2190:9: expected unsigned long long [unsigned] [usertype] value
fs/btrfs/send.c:2190:9: got restricted __le64 [usertype] ctransid
fs/btrfs/send.c:2195:17: warning: incorrect type in argument 3 (different base types)
fs/btrfs/send.c:2195:17: expected unsigned long long [unsigned] [usertype] value
fs/btrfs/send.c:2195:17: got restricted __le64 [usertype] ctransid
fs/btrfs/send.c:3716:9: warning: incorrect type in argument 3 (different base types)
fs/btrfs/send.c:3716:9: expected unsigned long long [unsigned] [usertype] value
fs/btrfs/send.c:3716:9: got restricted __le64 [usertype] ctransid
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When merging an extent_map with its right neighbor, increment
its block_len with the neighbor's block_len.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
[commit 8185554d: fix incorrect inode acl reset] introduced a dead
code by adding a condition which can never be true to an else
branch. The condition can never be true because it is already
checked by a previous if statement which causes function to return.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reviewed-By: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We were accounting for sizeof(struct btrfs_item) twice, once
in the data_size variable and another time in the if statement
below.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently we do 2 traversals of an inode's extent_io_tree
before inserting an extent state structure: 1 to see if a
matching extent state already exists and 1 to do the insertion
if the fist traversal didn't found such extent state.
This change just combines those tree traversals into a single one.
While running sysbench tests (random writes) I captured the number
of elements in extent_io_tree trees for a while (into a procfs file
backed by a seq_list from seq_file module) and got this histogram:
Count: 9310
Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688
Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000
51.000 - 93.933: 693 ########
93.933 - 172.314: 938 ##########
172.314 - 315.408: 856 #########
315.408 - 576.646: 95 #
576.646 - 6415.830: 888 ##########
6415.830 - 11713.809: 1024 ###########
11713.809 - 21386.000: 4816 #####################################################
So traversing such trees can take some significant time that can
easily be avoided.
Ran the following sysbench tests, 5 times each, for sequential and
random writes, and got the following results:
sysbench --test=fileio --file-num=1 --file-total-size=2G \
--file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \
--max-requests=0 --max-time=60 --file-io-mode=sync
sysbench --test=fileio --file-num=1 --file-total-size=2G \
--file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \
--max-requests=0 --max-time=60 --file-io-mode=sync
Before this change:
sequential writes: 69.28Mb/sec (average of 5 runs)
random writes: 4.14Mb/sec (average of 5 runs)
After this change:
sequential writes: 69.91Mb/sec (average of 5 runs)
random writes: 5.69Mb/sec (average of 5 runs)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we didn't find a matching extent state, we inserted a new one
but didn't cache it in the **cached_state parameter, which makes a
subsequent call do a tree lookup to get it.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before this change, adding an extent map to the extent map tree of an
inode required 2 tree nevigations:
1) doing a tree navigation to search for an existing extent map starting
at the same offset or an extent map that overlaps the extent map we
want to insert;
2) Another tree navigation to add the extent map to the tree (if the
former tree search didn't found anything).
This change just merges these 2 steps into a single one.
While running first few btrfs xfstests I had noticed these trees easily
had a few hundred elements, and then with the following sysbench test it
reached over 1100 elements very often.
Test:
sysbench --test=fileio --file-num=32 --file-total-size=10G \
--file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \
--max-requests=1000000 --file-io-mode=sync [prepare|run]
(fs created with mkfs.btrfs -l 4096 -f /dev/sdb3 before each sysbench
prepare phase)
Before this patch:
run 1 - 41.894Mb/sec
run 2 - 40.527Mb/sec
run 3 - 40.922Mb/sec
run 4 - 49.433Mb/sec
run 5 - 40.959Mb/sec
average - 42.75Mb/sec
After this patch:
run 1 - 48.036Mb/sec
run 2 - 50.21Mb/sec
run 3 - 50.929Mb/sec
run 4 - 46.881Mb/sec
run 5 - 53.192Mb/sec
average - 49.85Mb/sec
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When attempting to move items from our target leaf to its neighbor
leaves (right and left), we only need to free data_size - free_space
bytes from our leaf in order to add the new item (which has size of
data_size bytes). Therefore attempt to move items to the right and
left leaves if they have at least data_size - free_space bytes free,
instead of data_size bytes free.
After 5 runs of the following test, I got a smaller number of btree
node splits overall:
sysbench --test=fileio --file-num=512 --file-total-size=5G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=8192 --max-requests=100000 --file-io-mode=sync
Before this change:
* 6171 splits (average of 5 test runs)
* 61.508Mb/sec of throughput (average of 5 test runs)
After this change:
* 6036 splits (average of 5 test runs)
* 63.533Mb/sec of throughput (average of 5 test runs)
An ideal test would not just have multiple threads/processes writing
to a file (insertion of file extent items) but also do other operations
that result in insertion of items with varied sizes, like file/directory
creations, creation of links, symlinks, xattrs, etc.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
After an ordered extent completes, don't blindly reset the
inode's ordered tree last accessed ordered extent pointer.
While running the xfstests I noticed that about 29% of the
time the ordered extent to which tree->last pointed was not
the same as our just completed ordered extent. After that I
ran the following sysbench test (after a prepare phase) and
noticed that about 68% of the time tree->last pointed to
a different ordered extent too.
sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=rndwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --max-requests=0 run
Therefore reset tree->last on ordered extent removal only if
it pointed to the ordered extent we're removing from the tree.
Results from 4 runs of the following test before and after
applying this patch:
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --file-io-mode=sync prepare
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --file-io-mode=sync run
Before this path:
run 1 - 64.049Mb/sec
run 2 - 63.455Mb/sec
run 3 - 64.656Mb/sec
run 4 - 63.833Mb/sec
After this patch:
run 1 - 66.149Mb/sec
run 2 - 68.459Mb/sec
run 3 - 66.338Mb/sec
run 4 - 66.176Mb/sec
With random writes (--file-test-mode=rndwr) I had huge fluctuations
on the results (+- 35% easily).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Filipe noticed that we were leaking the features attribute group
after umount. His fix of just calling sysfs_remove_group() wasn't enough
since that removes just the supported features and not the unsupported
features.
This patch changes the unknown feature handling to add them individually
so we can skip the kmalloc and uses the same iteration to tear them down
later.
We also fix the error handling during mount so that we catch the
failing creation of the per-super kobject, and handle proper teardown
of a half-setup sysfs context.
Tested properly with kmemleak enabled this time.
Reported-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Tested-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch fixes the following warnings:
fs/btrfs/extent-tree.c:6201:12: sparse: symbol 'get_raid_name' was not declared. Should it be static?
fs/btrfs/extent-tree.c:8430:9: error: format not a string literal and no format arguments [-Werror=format-security] get_raid_name(index));
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The inode eviction can be very slow, because during eviction we
tell the VFS to truncate all of the inode's pages. This results
in calls to btrfs_invalidatepage() which in turn does calls to
lock_extent_bits() and clear_extent_bit(). These calls result in
too many merges and splits of extent_state structures, which
consume a lot of time and cpu when the inode has many pages. In
some scenarios I have experienced umount times higher than 15
minutes, even when there's no pending IO (after a btrfs fs sync).
A quick way to reproduce this issue:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ cd /mnt/btrfs
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
--file-test-mode=seqwr --num-threads=128 \
--file-block-size=16384 --max-time=60 --max-requests=0 run
$ time btrfs fi sync .
FSSync '.'
real 0m25.457s
user 0m0.000s
sys 0m0.092s
$ cd ..
$ time umount /mnt/btrfs
real 1m38.234s
user 0m0.000s
sys 1m25.760s
The same test on ext4 runs much faster:
$ mkfs.ext4 /dev/sdb3
$ mount /dev/sdb3 /mnt/ext4
$ cd /mnt/ext4
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
--file-test-mode=seqwr --num-threads=128 \
--file-block-size=16384 --max-time=60 --max-requests=0 run
$ sync
$ cd ..
$ time umount /mnt/ext4
real 0m3.626s
user 0m0.004s
sys 0m3.012s
After this patch, the unmount (inode evictions) is much faster:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ cd /mnt/btrfs
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
--file-test-mode=seqwr --num-threads=128 \
--file-block-size=16384 --max-time=60 --max-requests=0 run
$ time btrfs fi sync .
FSSync '.'
real 0m26.774s
user 0m0.000s
sys 0m0.084s
$ cd ..
$ time umount /mnt/btrfs
real 0m1.811s
user 0m0.000s
sys 0m1.564s
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We hit a forever loop when doing balance relocation,the reason
is that we firstly reserve 4M(node size is 16k).and within transaction
we will try to add extra reservation for snapshot roots,this will
return -EAGAIN if there has been a thread flushing space to reserve
space.We will do this again and again with filesystem becoming nearly
full.
If the above '-EAGAIN' case happens, we try to refill reservation more
outsize of transaction, and this will return eariler in enospc case,however,
this dosen't really hurt because it makes no sense doing balance relocation
with the filesystem nearly full.
Miao Xie helped a lot to track this issue, thanks.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the ordered extent's last byte was 1 less than our region's
start byte, we would unnecessarily wait for the completion of
that ordered extent, because it doesn't intersect our target
range.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we ran sysbench on the fs with compression, the following WARN_ONs were
triggered:
fs/btrfs/inode.c:7829 WARN_ON(BTRFS_I(inode)->outstanding_extents);
fs/btrfs/inode.c:7830 WARN_ON(BTRFS_I(inode)->reserved_extents);
fs/btrfs/inode.c:7832 WARN_ON(BTRFS_I(inode)->csum_bytes);
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o compress <dev> <mnt>
# cd <mnt>
# sysbench --test=fileio --num-threads=8 --file-total-size=8G \
> --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \
> --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \
> --file-test-mode=sync prepare
# cd -
# umount <mnt>
# mount -o compress <dev> <mnt>
# cd <mnt>
# sysbench --test=fileio --num-threads=8 --file-total-size=8G \
> --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \
> --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \
> --file-test-mode=sync run
# cd -
# umount <mnt>
The reason of this problem is:
Task0 Task1
btrfs_direct_IO
unlock(&inode->i_mutex)
lock(&inode->i_mutex)
reserve_space()
prepare_pages()
lock_extent()
clear_extent()
unlock_extent()
lock_extent()
test_extent(uptodate)
return false
copy_data()
set_delalloc_extent()
extent need compress
go back to buffered write
clear_extent(DELALLOC | DIRTY)
unlock_extent()
Task 0 and 1 wrote the same place, and task0 cleared the delalloc flag which
was set by task1, it made the dirty pages in that extents couldn't be flushed
into the disk, so the reserved space for that extent was not released at
the end.
This patch fixes the above bug by unlocking the extent after the delalloc.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
- the caller has gotten the inode object, needn't pass the file object.
And if so, we needn't define a inode pointer variant.
- the position should be aligned by the page size not sector size, so
we also needn't pass the root object into prepare_pages().
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't need to crash hard here, it's just reading a sysfs file. The
values considered in switch are from a fixed set, the default case
should not happen at all.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Added in patch "btrfs: add ability to change features via sysfs",
modifications to superblock don't need to reserve metadata blocks when
starting a transaction.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The kernel macro pr_debug is defined as a empty statement when DEBUG is
not defined. Make btrfs_debug match pr_debug to avoid spamming
the kernel log with debug messages
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Found by uselex.rb:
> btrfs_get_inode_ref_index: [R]: exported from:
fs/btrfs/inode-item.o fs/btrfs/btrfs.o fs/btrfs/built-in.o
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: David Stebra <dsterba@suse.cz>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is the third step in bootstrapping the btrfs_find_item interface.
The function find_orphan_item(), in orphan.c, is similar to the two
functions already replaced by the new interface. It uses two parameters,
which are already present in the interface, and is nearly identical to
the function brought in in the previous patch.
Replace the two calls to find_orphan_item() with calls to
btrfs_find_item(), with the defined objectid and type that was used
internally by find_orphan_item(), a null path, and a null key. Add a
test for a null path to btrfs_find_item, and if it passes, allocate and
free the path. Finally, remove find_orphan_item().
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch is the second step in bootstrapping the btrfs_find_item
interface. The btrfs_find_root_ref() is similar to the former
__inode_info(); it accepts four of its parameters, and duplicates the
first half of its functionality.
Replace the one former call to btrfs_find_root_ref() with a call to
btrfs_find_item(), along with the defined key type that was used
internally by btrfs_find_root ref, and a null found key. In
btrfs_find_item(), add a test for the null key at the place where
the functionality of btrfs_find_root_ref() ends; btrfs_find_item()
then returns if the test passes. Finally, remove btrfs_find_root_ref().
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Zach Brown <zab@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are many btrfs functions that manually search the tree for an
item. They all reimplement the same mechanism and differ in the
conditions that they use to find the item. __inode_info() is one such
example. Zach Brown proposed creating a new interface to take the place
of these functions.
This patch is the first step to creating the interface. A new function,
btrfs_find_item, has been added to ctree.c and prototyped in ctree.h.
It is identical to __inode_info, except that the order of the parameters
has been rearranged to more closely those of similar functions elsewhere
in the code (now, root and path come first, then the objectid, offset
and type, and the key to be filled in last). __inode_info's callers have
been set to call this new function instead, and __inode_info itself has
been removed.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Zach Brown <zab@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use otherwise unused local variables slot in update_qgroup_limit_item and
in update_qgroup_info_item, and remove unused variable ins from
btrfs_qgroup_account_ref.
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The variable window_start in setup_cluster_no_bitmap is not used since commit
1bb91902dc
(Btrfs: revamp clustered allocation logic)
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove unused variables:
* tree from end_bio_extent_writepage,
* item from extent_fiemap.
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The variable found_uncached_bg in find_free_extent is not used since commit
285ff5af6c
(Btrfs: remove the ideal caching code)
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove unused variables:
* tree from csum_dirty_buffer,
* tree from btree_readpage_end_io_hook,
* tree from btree_writepages,
* bytenr from btrfs_create_tree,
* fs_info from end_workqueue_fn.
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Variable owner in btrfs_new_inode is unused since commit
d82a6f1d7e
(Btrfs: kill BTRFS_I(inode)->block_group)
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This adds a writeable attribute which describes the label.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we have the infrastructure for per-super attributes, we can
publish device membership in /sys/fs/btrfs/<fsid>/devices. The information
is published as symlinks to the block devices.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
While trying to debug ENOSPC issues, it's helpful to understand what the
kernel's view of the available space is. We export this information
via ioctl, but sysfs files are more easily used.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs filesystem df output will show the size of the metadata space
and how much of it is used, and the user assumes that the difference
is all usable space. Since that's not actually the case due to the
global metadata reservation, we should provide the full picture to the
user.
This patch adds an ioctl that exports the size of the global metadata
reservation so that btrfs filesystem df can report it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we have the feature name strings available in the kernel via
the sysfs attributes, we can use them for printing better failure
messages from the ioctl path.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds the ability to change (set/clear) features while the file
system is mounted. A bitmask is added for each feature set for the
support to set and clear the bits. A message indicating which bit
has been set or cleared is issued when it's been changed and also when
permission or support for a particular bit has been denied.
Since the the attributes can now be writable, we need to introduce
another struct attribute to hold the different permissions.
If neither set or clear is supported, the file will have 0444 permissions.
If either set or clear is supported, the file will have 0644 permissions
and the store handler will filter out the write based on the bitmask.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
With the compat and compat-ro bits, it's possible for file systems to
exist that have features that aren't supported by the kernel's file system
implementation yet still be mountable.
This patch publishes read-only info on those features using a prefix:number
format, where the number is the bit number rather than the shifted value.
e.g. "compat:12"
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch publishes information on which features are enabled in the
file system on a per-super basis. At this point, it only publishes
information on features supported by the file system implementation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds per-super attributes to sysfs.
It doesn't publish any attributes yet, but does the proper lifetime
handling as well as the basic infrastructure to add new attributes.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds the ability to publish supported features to sysfs under
/sys/fs/btrfs/features.
The files are module-wide and export which features the kernel supports.
The content, for now, is just "0\n".
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are some feature bits that require no offline setup and can
be enabled online. I've only reviewed extended irefs, but there will
probably be more.
We introduce three new ioctls:
- BTRFS_IOC_GET_SUPPORTED_FEATURES: query the kernel for supported features.
- BTRFS_IOC_GET_FEATURES: query the kernel for enabled features on a per-fs
basis, as well as querying for which features are changeable with mounted.
- BTRFS_IOC_SET_FEATURES: change features on a per-fs basis.
We introduce two new masks per feature set (_SAFE_SET and _SAFE_CLEAR) that
allow us to define which features are safe to change at runtime.
The failure modes for BTRFS_IOC_SET_FEATURES are as follows:
- Enabling a completely unsupported feature: warns and returns -ENOTSUPP
- Enabling a feature that can only be done offline: warns and returns -EPERM
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we have data deduplication on, we'll hang on the merge part
because it needs to verify every queued delayed data refs related to
this disk offset but we may have millions refs.
And in the case of delayed data refs, we don't usually have too much
data refs to merge.
So it's safe to shut it down for data refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The way how we process delayed refs is
1) get a bunch of head refs,
2) pick up one head ref,
3) go one node back for any delayed ref updates.
The head ref is also linked in the same rbtree as the delayed ref is,
so in 1) stage, we have to walk one by one including not only head refs, but
delayed refs.
When we have a great number of delayed refs pending to process,
this'll cost time a lot.
Here we introduce a head ref specific rbtree, it only has head refs, so troubles
go away.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
We were looking at file_extent_num_bytes unconditionally when looking at
referenced data bytes, but this isn't correct for compression. Fix this by
checking the compression of the file extent we are and setting num_bytes to
disk_num_bytes in the case of compression so that we are marking the proper
bytes as referenced. This fixes check_int_data freaking out when running
btrfs/004. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs has always had these filler extent data items for holes in inodes. This
has made somethings very easy, like logging hole punches and sending hole
punches. However for large holey files these extent data items are pure
overhead. So add an incompatible feature to no longer add hole extents to
reduce the amount of metadata used by these sort of files. This has a few
changes for logging and send obviously since they will need to detect holes and
log/send the holes if there are any. I've tested this thoroughly with xfstests
and it doesn't cause any issues with and without the incompat format set.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull vfs updates from Al Viro:
"Assorted stuff; the biggest pile here is Christoph's ACL series. Plus
assorted cleanups and fixes all over the place...
There will be another pile later this week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
__dentry_path() fixes
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.
Fix race when checking i_size on direct i/o read
hfsplus: remove can_set_xattr
nfsd: use get_acl and ->set_acl
fs: remove generic_acl
nfs: use generic posix ACL infrastructure for v3 Posix ACLs
gfs2: use generic posix ACL infrastructure
jfs: use generic posix ACL infrastructure
xfs: use generic posix ACL infrastructure
reiserfs: use generic posix ACL infrastructure
ocfs2: use generic posix ACL infrastructure
jffs2: use generic posix ACL infrastructure
hfsplus: use generic posix ACL infrastructure
f2fs: use generic posix ACL infrastructure
ext2/3/4: use generic posix ACL infrastructure
btrfs: use generic posix ACL infrastructure
fs: make posix_acl_create more useful
fs: make posix_acl_chmod more useful
...
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_created to __posix_acl_create and add
a fully featured helper to set up the ACLs on file creation that
uses get_acl().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_chmod to __posix_acl_chmod and add
a fully featured ACL chmod helper that uses the ->set_acl inode
operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* don't assume that ->dest_count won't change between copy_from_user()
and memdup_user()
* use fdget instead of fget
* don't bother comparing superblocks when we'd already compared vfsmounts
* get rid of excessive goto
* use file_inode() instead of open-coding the sucker
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For 3.14-rc1 there are fixes in the areas of remote attributes, discard,
growfs, memory leaks in recovery, directory v2, quotas, the MAINTAINERS
file, allocation alignment, extent list locking, and in
xfs_bmapi_allocate. There are cleanups in xfs_setsize_buftarg, removing
unused macros, quotas, setattr, and freeing of inode clusters. The
in-memory and on-disk log format have been decoupled, a common helper to
calculate the number of blocks in an inode cluster has been added, and
handling of i_version has been pulled into the filesystems that use it.
- cleanup in xfs_setsize_buftarg
- removal of remaining unused flags for vop toss/flush/flushinval
- fix for memory corruption in xfs_attrlist_by_handle
- fix for out-of-date comment in xfs_trans_dqlockedjoin
- fix for discard if range length is less than one block
- fix for overrun of agfl buffer using growfs on v4 superblock filesystems
- pull i_version handling out into the filesystems that use it
- don't leak recovery items on error
- fix for memory leak in xfs_dir2_node_removename
- several cleanups for quotas
- fix bad assertion in xfs_qm_vop_create_dqattach
- cleanup for xfs_setattr_mode, and add xfs_setattr_time
- fix quota assert in xfs_setattr_nonsize
- fix an infinite loop when turning off group/project quota before user
quota
- fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
with large directory block sizes
- fix Dave's email address in MAINTAINERS
- cleanup calculation of freed inode cluster blocks
- fix alignment of initial file allocations to match filesystem geometry
- decouple in-memory and on-disk log format
- introduce a common helper to calculate the number of filesystem
blocks in an inode cluster
- fixes for extent list locking
- fix for off-by-one in xfs_attr3_rmt_verify
- fix for missing destroy_work_on_stack in xfs_bmapi_allocate
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=t8nB
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"This is primarily bug fixes, many of which you already have. New
stuff includes a series to decouple the in-memory and on-disk log
format, helpers in the area of inode clusters, and i_version handling.
We decided to try to use more topic branches this release, so there
are some merge commits in there on account of that. I'm afraid I
didn't do a good job of putting meaningful comments in the first
couple of merges. Sorry about that. I think I have the hang of it
now.
For 3.14-rc1 there are fixes in the areas of remote attributes,
discard, growfs, memory leaks in recovery, directory v2, quotas, the
MAINTAINERS file, allocation alignment, extent list locking, and in
xfs_bmapi_allocate. There are cleanups in xfs_setsize_buftarg,
removing unused macros, quotas, setattr, and freeing of inode
clusters. The in-memory and on-disk log format have been decoupled, a
common helper to calculate the number of blocks in an inode cluster
has been added, and handling of i_version has been pulled into the
filesystems that use it.
- cleanup in xfs_setsize_buftarg
- removal of remaining unused flags for vop toss/flush/flushinval
- fix for memory corruption in xfs_attrlist_by_handle
- fix for out-of-date comment in xfs_trans_dqlockedjoin
- fix for discard if range length is less than one block
- fix for overrun of agfl buffer using growfs on v4 superblock
filesystems
- pull i_version handling out into the filesystems that use it
- don't leak recovery items on error
- fix for memory leak in xfs_dir2_node_removename
- several cleanups for quotas
- fix bad assertion in xfs_qm_vop_create_dqattach
- cleanup for xfs_setattr_mode, and add xfs_setattr_time
- fix quota assert in xfs_setattr_nonsize
- fix an infinite loop when turning off group/project quota before
user quota
- fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
with large directory block sizes
- fix Dave's email address in MAINTAINERS
- cleanup calculation of freed inode cluster blocks
- fix alignment of initial file allocations to match filesystem
geometry
- decouple in-memory and on-disk log format
- introduce a common helper to calculate the number of filesystem
blocks in an inode cluster
- fixes for extent list locking
- fix for off-by-one in xfs_attr3_rmt_verify
- fix for missing destroy_work_on_stack in xfs_bmapi_allocate"
* tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs: (51 commits)
xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
xfs: fix off-by-one error in xfs_attr3_rmt_verify
xfs: assert that we hold the ilock for extent map access
xfs: use xfs_ilock_attr_map_shared in xfs_attr_list_int
xfs: use xfs_ilock_attr_map_shared in xfs_attr_get
xfs: use xfs_ilock_data_map_shared in xfs_qm_dqiterate
xfs: use xfs_ilock_data_map_shared in xfs_qm_dqtobp
xfs: take the ilock around xfs_bmapi_read in xfs_zero_remaining_bytes
xfs: reinstate the ilock in xfs_readdir
xfs: add xfs_ilock_attr_map_shared
xfs: rename xfs_ilock_map_shared
xfs: remove xfs_iunlock_map_shared
xfs: no need to lock the inode in xfs_find_handle
xfs: use xfs_icluster_size_fsb in xfs_imap
xfs: use xfs_icluster_size_fsb in xfs_ifree_cluster
xfs: use xfs_icluster_size_fsb in xfs_ialloc_inode_init
xfs: use xfs_icluster_size_fsb in xfs_bulkstat
xfs: introduce a common helper xfs_icluster_size_fsb
xfs: get rid of XFS_IALLOC_BLOCKS macros
xfs: get rid of XFS_INODE_CLUSTER_SIZE macros
...
In btrfs_end_bio(), we increment bi_remaining if is_orig_bio. If not,
we restore the orig_bio but failed to increment bi_remaining for
orig_bio, which triggers a BUG_ON later when bio_endio is called. Fix
is to increment bi_remaining when we restore the orig bio as well.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
CC: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Muthukumar Ratty <muthur@gmail.com>
Reviewed-by: Chris Mason <clm@fb.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch fixed several typo in printk from various
part of kernel source.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
=/4/R
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc6' into for-3.14/core
Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.
Fixup merge issues related to the immutable biovec changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conflicts:
block/blk-flush.c
fs/btrfs/check-integrity.c
fs/btrfs/extent_io.c
fs/btrfs/scrub.c
fs/logfs/dev_bdev.c
Correct spelling typo in various part of kernel
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull btrfs fixes from Chris Mason:
"This is a small collection of fixes. It was rebased this morning, but
I was just fixing signed-off-by tags with the wrong email"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix access_ok() check in btrfs_ioctl_send()
Btrfs: make sure we cleanup all reloc roots if error happens
Btrfs: skip building backref tree for uuid and quota tree when doing balance relocation
Btrfs: fix an oops when doing balance relocation
Btrfs: don't miss skinny extent items on delayed ref head contention
btrfs: call mnt_drop_write after interrupted subvol deletion
Btrfs: don't clear the default compression type
The closing parenthesis is in the wrong place. We want to check
"sizeof(*arg->clone_sources) * arg->clone_sources_count" instead of
"sizeof(*arg->clone_sources * arg->clone_sources_count)".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org
I hit an oops when merging reloc roots fails, the reason is that
new reloc roots may be added and we should make sure we cleanup
all reloc roots.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Quota tree and UUID Tree is only cowed, they can not be snapshoted.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
I hit an oops when inserting reloc root into @reloc_root_tree(it can be
easily triggered when forcing cow for relocation root)
[ 866.494539] [<ffffffffa0499579>] btrfs_init_reloc_root+0x79/0xb0 [btrfs]
[ 866.495321] [<ffffffffa044c240>] record_root_in_trans+0xb0/0x110 [btrfs]
[ 866.496109] [<ffffffffa044d758>] btrfs_record_root_in_trans+0x48/0x80 [btrfs]
[ 866.496908] [<ffffffffa0494da8>] select_reloc_root+0xa8/0x210 [btrfs]
[ 866.497703] [<ffffffffa0495c8a>] do_relocation+0x16a/0x540 [btrfs]
This is because reloc root inserted into @reloc_root_tree is not within one
transaction,reloc root may be cowed and root block bytenr will be reused then
oops happens.We should update reloc root in @reloc_root_tree when cow reloc
root node, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently extent-tree.c:btrfs_lookup_extent_info() can miss the lookup
of skinny extent items. This can happen when the execution flow is the
following:
* We do an extent tree lookup and fail to find a skinny extent item;
* As a result, we attempt to see if a non-skinny extent item exists,
either by looking at previous item in the leaf or by doing another
full extent tree search;
* We have a transaction and then we check for a matching delayed ref
head in the transaction's delayed refs rbtree;
* We find such delayed ref head and then we try to lock it with a
call to mutex_trylock();
* The lock was contended so we jump to the label "again", which repeats
the extent tree search but for a non-skinny extent item, because we set
previously metadata variable to 0 and the search key to look for a
non-skinny extent-item;
* After the jump (and after releasing the transaction's delayed refs
lock), a skinny extent item might have been added to the extent tree
but we will miss it because metadata is set to 0 and the search key
is set for a non-skinny extent-item.
The fix here is to not reset metadata to 0 and to jump to the initial search
key setup if the delayed ref head is contended, instead of jumping directly
to the extent tree search label ("again").
This issue was found while investigating the issue reported at Bugzilla 64961.
David Sterba suspected this function was missing extent items, and that
this could be caused by the last change to this function, which was made
in the following patch:
[PATCH] Btrfs: optimize btrfs_lookup_extent_info()
(commit 74be951087)
But in fact this issue already existed before, because after failing to find
a skinny extent item, the code set the search key for a non-skinny extent
item, and on contention of a matching delayed ref head it would not search
the extent tree for a skinny extent item anymore.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
If btrfs_ioctl_snap_destroy blocks on the mutex and the process is
killed, mnt_write count is unbalanced and leads to unmountable
filesystem.
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
We met a oops caused by the wrong compression type:
[ 556.512356] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 556.512370] IP: [<ffffffff811dbaa0>] __list_del_entry+0x1/0x98
[SNIP]
[ 556.512490] [<ffffffff811dbb44>] ? list_del+0xd/0x2b
[ 556.512539] [<ffffffffa05dd5ce>] find_workspace+0x97/0x175 [btrfs]
[ 556.512546] [<ffffffff813c14b5>] ? _raw_spin_lock+0xe/0x10
[ 556.512576] [<ffffffffa05de276>] btrfs_compress_pages+0x2d/0xa2 [btrfs]
[ 556.512601] [<ffffffffa05af060>] compress_file_range.constprop.54+0x1f2/0x4e8 [btrfs]
[ 556.512627] [<ffffffffa05af388>] async_cow_start+0x32/0x4d [btrfs]
[ 556.512655] [<ffffffffa05cc7a1>] worker_loop+0x144/0x4c3 [btrfs]
[ 556.512661] [<ffffffff81059404>] ? finish_task_switch+0x80/0xb8
[ 556.512689] [<ffffffffa05cc65d>] ? btrfs_queue_worker+0x244/0x244 [btrfs]
[ 556.512695] [<ffffffff8104fa4e>] kthread+0x8d/0x95
[ 556.512699] [<ffffffff81050000>] ? bit_waitqueue+0x34/0x7d
[ 556.512704] [<ffffffff8104f9c1>] ? __kthread_parkme+0x65/0x65
[ 556.512709] [<ffffffff813c7eec>] ret_from_fork+0x7c/0xb0
[ 556.512713] [<ffffffff8104f9c1>] ? __kthread_parkme+0x65/0x65
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o nodatacow <dev> <mnt>
# touch <mnt>/<file>
# chattr =c <mnt>/<file>
# dd if=/dev/zero of=<mnt>/<file> bs=1M count=10
It is because we cleared the default compression type when setting the
nodatacow. In fact, we needn't do it because we have used COMPRESS flag to
indicate if we need compressed the file data or not, needn't use the
variant -- compress_type -- in btrfs_info to do the same thing, and just
use it to hold the default compression type. Or we would get a wrong compress
type for a file whose own compress flag is set but the compress flag of its
filesystem is not set.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. It contains:
- A fix for a use-after-free of a request in blk-mq. From Ming Lei
- A fix for a blk-mq bug that could attempt to dereference a NULL rq
if allocation failed
- Two xen-blkfront small fixes
- Cleanup of submit_bio_wait() type uses in the kernel, unifying
that. From Kent
- A fix for 32-bit blkg_rwstat reading. I apologize for this one
looking mangled in the shortlog, it's entirely my fault for missing
an empty line between the description and body of the text"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix use-after-free of request
blk-mq: fix dereference of rq->mq_ctx if allocation fails
block: xen-blkfront: Fix possible NULL ptr dereference
xen-blkfront: Silence pfn maybe-uninitialized warning
block: submit_bio_wait() conversions
Update of blkg_stat and blkg_rwstat may happen in bh context
Currently notify_change directly updates i_version for size updates,
which not only is counter to how all other fields are updated through
struct iattr, but also breaks XFS, which need inode updates to happen
under its own lock, and synchronized to the structure that gets written
to the log.
Remove the update in the common code, and it to btrfs and ext4,
XFS already does a proper updaste internally and currently gets a
double update with the existing code.
IMHO this is 3.13 and -stable material and should go in through the XFS
tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
btrfs bits got lost in the rebase
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Chris Mason <clm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was being open coded in a few places.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With immutable biovecs we don't want code accessing bi_io_vec directly -
the uses this patch changes weren't incorrect since they all own the
bio, but it makes the code harder to audit for no good reason - also,
this will help with multipage bvecs later.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
It was being open coded in a few places.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NeilBrown <neilb@suse.de>
Pull btrfs fixes from Chris Mason:
"Almost all of these are bug fixes. Dave Sterba's documentation update
is the big exception because he removed our promises to set any
machine running Btrfs on fire"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Documentation: filesystems: update btrfs tools section
Documentation: filesystems: add new btrfs mount options
btrfs: update kconfig help text
btrfs: fix bio_size_ok() for max_sectors > 0xffff
btrfs: Use trace condition for get_extent tracepoint
btrfs: fix typo in the log message
Btrfs: fix list delete warning when removing ordered root from the list
Btrfs: print bytenr instead of page pointer in check-int
Btrfs: remove dead codes from ctree.h
Btrfs: don't wait for ordered data outside desired range
Btrfs: fix lockdep error in async commit
Btrfs: avoid heavy operations in btrfs_commit_super
Btrfs: fix __btrfs_start_workers retval
Btrfs: disable online raid-repair on ro mounts
Btrfs: do not inc uncorrectable_errors counter on ro scrubs
Btrfs: only drop modified extents if we logged the whole inode
Btrfs: make sure to copy everything if we rename
Btrfs: don't BUG_ON() if we get an error walking backrefs
Reflect the current status. Portions of the text taken from the
wiki pages.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The data type of max_sectors in queue settings is unsigned int. But
this value is stored to the local variable whose type is unsigned short
in bio_size_ok(). This can cause unexpected result when max_sectors >
0xffff.
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Doing an if statement to test some condition to know if we should
trigger a tracepoint is pointless when tracing is disabled. This just
adds overhead and wastes a branch prediction. This is why the
TRACE_EVENT_CONDITION() was created. It places the check inside the jump
label so that the branch does not happen unless tracing is enabled.
That is, instead of doing:
if (em)
trace_btrfs_get_extent(root, em);
Which is basically this:
if (em)
if (static_key(trace_btrfs_get_extent)) {
Using a TRACE_EVENT_CONDITION() we can just do:
trace_btrfs_get_extent(root, em);
And the condition trace event will do:
if (static_key(trace_btrfs_get_extent)) {
if (em) {
...
The static key is a non conditional jump (or nop) that is faster than
having to check if em is NULL or not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Commit b02441999e "Btrfs: don't wait for
the completion of all the ordered extents" introduced a bug that broke
the ordered root list:
WARNING: CPU: 1 PID: 7119 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
It is because we forgot to return the roots in the splice list to the
ordered list of the fs. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The page pointer information was useless. The bytenr is what you
want when you search for submitted write bios.
Additionally, a new bit in the print mask is added that allows
to selectively enable the check-int submit_bio verbose mode. Before,
the global verbose mode had to be enabled leading to many million
useless lines in the kernel log.
And a comment is added that explains that LOG_BUF_SHIFT needs to
be set to a really high value.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
These two functions are only stated but undefined.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In btrfs_wait_ordered_range(), if we found an extent to the left
of the start of our desired wait range and the last byte of that
extent is 1 less than the desired range's start, we would would
wait for the IO completion of that extent unnecessarily.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Lockdep complains about btrfs's async commit:
[ 2372.462171] [ BUG: bad unlock balance detected! ]
[ 2372.462191] 3.12.0+ #32 Tainted: G W
[ 2372.462209] -------------------------------------
[ 2372.462228] ceph-osd/14048 is trying to release lock (sb_internal) at:
[ 2372.462275] [<ffffffffa022cb10>] btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs]
[ 2372.462305] but there are no more locks to release!
[ 2372.462324]
[ 2372.462324] other info that might help us debug this:
[ 2372.462349] no locks held by ceph-osd/14048.
[ 2372.462367]
[ 2372.462367] stack backtrace:
[ 2372.462386] CPU: 2 PID: 14048 Comm: ceph-osd Tainted: G W 3.12.0+ #32
[ 2372.462414] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011
[ 2372.462455] ffffffffa022cb10 ffff88007490fd28 ffffffff816f094a ffff8800378aa320
[ 2372.462491] ffff88007490fd50 ffffffff810adf4c ffff8800378aa320 ffff88009af97650
[ 2372.462526] ffffffffa022cb10 ffff88007490fd88 ffffffff810b01ee ffff8800898c0000
[ 2372.462562] Call Trace:
[ 2372.462584] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs]
[ 2372.462619] [<ffffffff816f094a>] dump_stack+0x45/0x56
[ 2372.462642] [<ffffffff810adf4c>] print_unlock_imbalance_bug+0xec/0x100
[ 2372.462677] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs]
[ 2372.462710] [<ffffffff810b01ee>] lock_release+0x18e/0x210
[ 2372.462742] [<ffffffffa022cb36>] btrfs_commit_transaction_async+0x1d6/0x2a0 [btrfs]
[ 2372.462783] [<ffffffffa025a7ce>] btrfs_ioctl_start_sync+0x3e/0xc0 [btrfs]
[ 2372.462822] [<ffffffffa025f1d3>] btrfs_ioctl+0x4c3/0x1f70 [btrfs]
[ 2372.462849] [<ffffffff812c0321>] ? avc_has_perm+0x121/0x1b0
[ 2372.462873] [<ffffffff812c0224>] ? avc_has_perm+0x24/0x1b0
[ 2372.462897] [<ffffffff8107ecc8>] ? sched_clock_cpu+0xa8/0x100
[ 2372.462922] [<ffffffff8117b145>] do_vfs_ioctl+0x2e5/0x4e0
[ 2372.462946] [<ffffffff812c19e6>] ? file_has_perm+0x86/0xa0
[ 2372.462969] [<ffffffff8117b3c1>] SyS_ioctl+0x81/0xa0
[ 2372.462991] [<ffffffff817045a4>] tracesys+0xdd/0xe2
====================================================
It's because that we don't do the right thing when checking if it's ok to
tell lockdep that we're trying to release the rwsem.
If the trans handle's type is TRANS_ATTACH, we won't acquire the freeze rwsem, but
as TRANS_ATTACH fits the check (trans < TRANS_JOIN_NOLOCK), we'll release the freeze
rwsem, which makes lockdep complains a lot.
Reported-by: Ma Jianpeng <majianpeng@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The 'git blame' history shows that, the old transaction commit code has to do
twice to ensure roots are updated and we have to flush metadata and super block
manually, however, right now all of these can be handled well inside
the transaction commit code without extra efforts.
And the error handling part remains same with the current code, -- 'return to
caller once we get error'.
This saves us a transaction commit and a flush of super block, which are both
heavy operations according to ftrace output analysis.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
__btrfs_start_workers returns 0 in case it raced with
btrfs_stop_workers and lost the race. This is wrong because worker in
this case is not allowed to start and is in fact destroyed. Return
-EINVAL instead.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This disables the "if needed, write the good copy back before the read
is completed" part of the read sequence for read-only mounts.
Cc: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Currently if we discover an error when scrubbing in ro mode we a)
blindly increment the uncorrectable_errors counter, and b) spam the
dmesg with the 'unable to fixup (regular) error at ...' message, even
though a) we haven't tried to determine if the error is correctable or
not, and b) we haven't tried to fixup anything. Fix this.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we fsync, seek and write, rename and then fsync again we will lose the
modified hole extent because the rename will drop all of the modified extents
since we didn't do the fast search. We need to only drop the modified extents
if we didn't do the fast search and we were logging the entire inode as we don't
need them anymore, otherwise this is being premature. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we rename a file that is already in the log and we fsync again we will lose
the new name. This is because we just log the inode update and not the new ref.
To fix this we just need to check if we are logging the new name of the inode
and copy all the metadata instead of just updating the inode itself. With this
patch my testcase now passes. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We can just return false for this so we stop doing the snapshot aware defrag
stuff. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs fixes from Chris Mason:
"This pull fixes the empty_zero_page bug that Heiko reported, and
includes one more cleanup from Al Viro"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: get rid of fdentry()
btrfs: fix empty_zero_page misusage
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
Heiko Carstens noticed that btrfs was using empty_zero_page
incorrectly. He explained:
The definition of empty_zero_page is architecture specific. It
is (currently) either a character array, an unsigned long
containing the address of the empty_zero_page, or even worse
only the address of the struct page belonging to the
empty_zero_page.
This commit changes btrfs to use a for-loop instead. On x86
the resulting .ko is smaller, and we're no longer worrying about
how each arch builds its zeros.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
rename the function -- btrfs_start_all_delalloc_inodes(), and make its
name be compatible to btrfs_wait_ordered_roots(), since they are always
used at the same place.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is very likely that there are lots of ordered extents in the filesytem,
if we wait for the completion of all of them when we want to reclaim some
space for the metadata space reservation, we would be blocked for a long
time. The performance would drop down suddenly for a long time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It was very likely that there were lots of async delalloc pages in the
filesystem, if we waited until all the pages were flushed, we would be
blocked for a long time, and the performance would also drop down.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In shrink_delalloc(), what we need reclaim is the metadata space, so
flushing pages by to_reclaim is not reasonable, it is very likely that
the pages we flush are not enough. And then we had to invoke the flush
function for several times, at the worst, we need call flush_space for
several times. It wasted time.
We improve this problem by converting the metadata space size we need
reserve to the delalloc bytes, By this way, we can flush the pages
by a reasonable number.
(Now we use a fixed number to do conversion, it is not flexible, maybe
we can find a good way to improve it in the future.)
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch picked up the code that was used to calculate the number of
the items for which we need reserve space, and we will use it in the next
patch.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We only allocate scrub workers if we pass all the necessary
checks, for example, there are no operation in progress.
Besides, move mutex lock protection outside of scrub_workers_get()
/scrub_workers_put().
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I hit this problem with my no holes patch and it made me realize what the
problem was for bz 60834. If the first item in the leaf is an inline extent and
we try to read anything starting from disk_bytenr onward we will read off the
end of the leaf. So we need to check to see what it's type is, and if it's not
REG we can just break out. This should fix this problem. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The function write_ctree_super() in disk-io.c uses variable ret to return
the result of function write_all_supers(). Since, this variable serves
no purpose, hence the patch removes it and returns the call of the
called function.
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Fix spacing issues detected via checkpatch.pl in accordance with the
kernel style guidelines.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Replace kmalloc(size * nr, ) with kmalloc_array(nr, size), thus making
it easier to check is that the calculation doesn't wrap or return a smaller allocation
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Enclose macros with complex values within parenthesis in accordance to
checkpatch.pl.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Use WARN_ON()'s return value in place of WARN_ON(1) for cleaner source
code that outputs a more descriptive warnings. Also fix the styling
warning of redundant braces that came up as a result of this fix.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove redundant local zero structure, replacing it by the kernel's
global ZERO_PAGE.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pack the structure btrfs_device in volumes.h to eliminate holes detected
by pahole, thus reducing binary memory footprint.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch replaces multiple atomic_inc() with atomic_add() in
delayed-inode.c to reduce source code and have few instructions
for compilation.
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The function free_root_pointers() in disk-io.h contains redundant code.
Therefore, this patch adds a helper function free_root_extent_buffers()
to free_root_pointers() to eliminate redundancy.
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Running balance and defrag concurrently can end up with a crash:
kernel BUG at fs/btrfs/relocation.c:4528!
RIP: 0010:[<ffffffffa01ac33b>] [<ffffffffa01ac33b>] btrfs_reloc_cow_block+ 0x1eb/0x230 [btrfs]
Call Trace:
[<ffffffffa01398c1>] ? update_ref_for_cow+0x241/0x380 [btrfs]
[<ffffffffa0180bad>] ? copy_extent_buffer+0xad/0x110 [btrfs]
[<ffffffffa0139da1>] __btrfs_cow_block+0x3a1/0x520 [btrfs]
[<ffffffffa013a0b6>] btrfs_cow_block+0x116/0x1b0 [btrfs]
[<ffffffffa013ddad>] btrfs_search_slot+0x43d/0x970 [btrfs]
[<ffffffffa0153c57>] btrfs_lookup_file_extent+0x37/0x40 [btrfs]
[<ffffffffa0172a5e>] __btrfs_drop_extents+0x11e/0xae0 [btrfs]
[<ffffffffa013b3fd>] ? generic_bin_search.constprop.39+0x8d/0x1a0 [btrfs]
[<ffffffff8117d14a>] ? kmem_cache_alloc+0x1da/0x200
[<ffffffffa0138e7a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[<ffffffffa0173ef0>] btrfs_drop_extents+0x60/0x90 [btrfs]
[<ffffffffa016b24d>] relink_extent_backref+0x2ed/0x780 [btrfs]
[<ffffffffa0162fe0>] ? btrfs_submit_bio_hook+0x1e0/0x1e0 [btrfs]
[<ffffffffa01b8ed7>] ? iterate_inodes_from_logical+0x87/0xa0 [btrfs]
[<ffffffffa016b909>] btrfs_finish_ordered_io+0x229/0xac0 [btrfs]
[<ffffffffa016c3b5>] finish_ordered_fn+0x15/0x20 [btrfs]
[<ffffffffa018cbe5>] worker_loop+0x125/0x4e0 [btrfs]
[<ffffffffa018cac0>] ? btrfs_queue_worker+0x300/0x300 [btrfs]
[<ffffffff81075ea0>] kthread+0xc0/0xd0
[<ffffffff81075de0>] ? insert_kthread_work+0x40/0x40
[<ffffffff8164796c>] ret_from_fork+0x7c/0xb0
[<ffffffff81075de0>] ? insert_kthread_work+0x40/0x40
----------------------------------------------------------------------
It turns out to be that balance operation will bump root's @last_snapshot,
which enables snapshot-aware defrag path, and backref walking stuff will
find data reloc tree as refs' parent, and hit the BUG_ON() during COW.
As data reloc tree's data is just for relocation purpose, and will be deleted right
after relocation is done, it's unnecessary to walk those refs belonged to data reloc
tree, it'd be better to skip them.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If something wrong happens in write endio, running snapshot-aware defragment
can end up with undefined results, maybe a crash, so we should avoid it.
In order to share similar code, this also adds a helper to free the struct for
snapshot-aware defrag.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we get any error while doing a dir index/item lookup in the
log tree, we were always unlinking the corresponding inode in
the subvolume. It makes sense to unlink only if the lookup failed
to find the dir index/item, which corresponds to NULL or -ENOENT,
and not when other errors happen (like a transient -ENOMEM or -EIO).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We were setting the csums search offset and length to the right values if
the extent is compressed, but later on right before doing the csums lookup
we were overriding these two parameters regardless of compression being
set or not for the extent.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We were ignoring the name component of the dir_item. Both the
name and data must fit within BTRFS_MAX_XATTR_SIZE(root).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Originally, we introduced scrub_super_lock to synchronize
tree log code with scrubbing super.
However we can replace scrub_super_lock with device_list_mutex,
because writing super will hold this mutex, this will reduce an extra
lock holding when writing supers in sync log code.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We define a 'int' to get extent's generation by mistake,fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
After running space balance on a new fs, the fs check program outputed the
following warning message:
free space inode generation (0) did not match free space cache generation (20)
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount <dev> <mnt>
# btrfs balance start <mnt>
# umount <mnt>
# btrfs check <dev>
It was because there was no data space after the space balance, and the free
space write out task didn't try to allocate a new data chunk for the free space
inode when doing the reservation. So the data space reservation failed, and in
order to tell the free space loader that this free space inode could not be
trusted, the generation of the free space inode wasn't updated. Then the check
program found this problem and outputed the above message.
But in fact, it is safe that we try to allocate a new data chunk when we find
the data space is not enough. The patch fixes the above problem by this way.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I noticed with my horrible snapshot excercisor that we were taking forever to
relocate the larger the file system got. This appeared to be because we were
committing the transaction _constantly_. There were a few places where we do
braindead things with metadata reservation, like start a transaction and then
try to refill the block rsv, which not only keeps us from committing a
transaction during the enospc stuff, but keeps us from doing some of the harder
flushing work which will make us more likely to need to commit the transaction.
We also were checking the block rsv and committing the transaction if the block
rsv was below a certain threshold, but we were doing this in a place where we
don't actually keep anything in the block rsv so this was always ending up false
so we always committed the transaction in this case. I tested this to make sure
it didn't break anything, but it takes about 10 hours to get the box to this
state so I don't know how much of an impact it will really make. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When using delalloc workers in a non-waiting way (like for enospc handling) we
can end up not actually waiting for the dirty pages to be started if we have
compression. We need to add an extra filemap flush to make sure any async
extents that have started are actually moved along before returning. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a list corruption warning from btrfs_remove_ordered_extent, it
is because we aren't taking the ordered_root_lock when we remove the inode from
the ordered operations list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is just the write path, the only reason we start a transaction is so we can
check cross references, we don't make any actual changes, so there is no reason
to abort the transaction if we fail. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We can just return an error and we'll bail out properly. We still want to catch
this case to make sure we don't have a bug somewhere, so just warn if this pops
up. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I noticed that if the free space cache has an error writing out it's data it
won't actually error out, it will just carry on. This is because it doesn't
check the return value of btrfs_wait_ordered_range, which didn't actually return
anything. So fix this in order to keep us from making free space cache look
valid when it really isnt. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Apparently we don't actually close the files until we return to userspace, so
stop using vfs_read in send. This is actually better for us since we can avoid
all the extra logic of holding the file we're sending open and making sure to
clean it up. This will fix people who have been hitting too many files open
errors when trying to send. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In mixed-mode, when a data-block was later reused for metadata, a
warning was printed. This condition is now filtered out and the
warning is eliminated in this case.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Yet another cleanup patch broke code for which no xfstest exists.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Instead of doing another extent tree search if the first search failed
to find a metadata item, check if the previous item in the leaf is an
extent item and use it if it is, otherwise do the second tree search
for an extent item.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When debugging ENOSPC issues, it's nice to be able to see which
reservations failed as well as the ones which succeeded.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
