Commit Graph

17 Commits

Author SHA1 Message Date
David Howells c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
James Smart 0f29b966d6 [SCSI] FC transport: Add dev_loss_tmo callbacks, and new fast_io_fail_tmo w/ callback
This patch adds the following functionality to the FC transport:

- dev_loss_tmo LLDD callback :
  Called to essentially confirm the deletion of an rport. Thus, it is
  called whenever the dev_loss_tmo fires, or when the rport is deleted
  due to other circumstances (module unload, etc).  It is expected that
  the callback will initiate the termination of any outstanding i/o on
  the rport.

- fast_io_fail_tmo and LLD callback:
  There are some cases where it may take a long while to truly determine
  device loss, but the system is in a multipathing configuration that if
  the i/o was failed quickly (faster than dev_loss_tmo), it could be
  redirected to a different path and completed sooner.

Many thanks to Mike Reed who cleaned up the initial RFC in support
of this post.

The original RFC is at:
http://marc.theaimsgroup.com/?l=linux-scsi&m=115505981027246&w=2

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04 21:22:05 -05:00
James Smart f14e2e29cd [SCSI] SCSI & FC transport: extend event vendor id's to 64bits
During discussions with Mike Christie, I became convinced that we needed
a larger vendor id. This patch extends the id from 32 to 64 bits.

This applies on top of the prior patches that add SCSI transport events
via netlink.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 15:35:15 -05:00
James Smart 84314fd474 [SCSI] SCSI and FC Transport: add netlink support for posting of transport events
This patch formally adds support for the posting of FC events via netlink.
It is a followup to the original RFC at:
  http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2
and the initial posting at:
  http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2

The patch has been updated to optimize the send path, per the discussions
in the initial posting.

Per discussions at the Storage Summit and at OLS, we are to use netlink for
async events from transports. Also per discussions, to avoid a netlink
protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol,
which can then be used by all transports.

This patch:
- Creates new files scsi_netlink.c and scsi_netlink.h, which contains the
  single and shared definitions for the SCSI Transport. It is tied into the
  base SCSI subsystem intialization.
  Contains a single interface routine, scsi_send_transport_event(), for a
  transport to send an event (via multicast to a protocol specific group).
- Creates a new scsi_netlink_fc.h file, which contains the FC netlink event
  messages
- Adds 3 new routines to the fc transport:
   fc_get_event_number() -  to get a FC event #
   fc_host_post_event()  -  to send a simple FC event (32 bits of data)
   fc_host_post_vendor_event() - to send a Vendor unique event, with
                                 arbitrary amounts of data.

   Note: the separation of event number allows for a LLD to send a standard
     event, followed by vendor-specific data for the event.

Note: This patch assumes 2 prior fc transport patches have been installed:
   http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2
   http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2

   Sorry - next time I'll do something like making these individual
   patches of the same posting when I know they'll be posted closely
   together.

Signed-off-by: James Smart <James.Smart@emulex.com>

Tidy up configuration not to make SCSI always select NET

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 15:33:49 -05:00
James Smart b8d0821012 [SCSI] fc transport: add fc_host system_hostname attribute and u64_to_wwn()
This patch updates the fc transport for the following:

- Addition of a new attribute "system_hostname" which can be
  used to set the fully qualified hostname that the fc_host
  is attached to. The fc_host can then register this string
  as the FDMI-based host name attribute.
  Note: for NPIV, a fc_host could be associated with a system which
    is not the local system.

- Add the inline function u64_to_wwn(), which is the inverse of the
  existing wwn_to_u64() function.

- Slight reorg, just to keep dynamic attributes with each other, etc

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:43:10 -07:00
James Smart 016131b8ff [SCSI] fc transport: convert fc_host symbolic_name attribute to a dynamic attribute
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:40:07 -07:00
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
James Smart aedf349773 [SCSI] FC transport: fixes for workq deadlocks
As previously reported via Michael Reed, the FC transport took a hit
in 2.6.15 (perhaps a little earlier) when we solved a recursion error.
There are 2 deadlocks occurring:
- With scan and the delete items sharing the same workq, flushing the
  workq for the delete code was getting it stalled behind a very long
  running scan code path.
- There's a deadlock where scsi_remove_target() has to sit behind
  scsi_scan_target() due to contention over the scan_lock().

This patch resolves the 1st deadlock and significantly reduces the
odds of the second. So far, we have only replicated the 2nd deadlock
on a highly-parallel SMP system. More on the 2nd deadlock in a following
email.

This patch reworks the transport to:
- Only use the scsi host workq for scanning
- Use 2 other workq's internally. One for deletions, the other for
  scheduled deletions. Originally, we tried this with a single workq,
  but the occassional flushes of the scheduled queues was hitting the
  second deadlock with a slightly higher frequency. In the future, we'll
  look at the LLDD's and the transport to see if we can get rid of this
  extra overhead.
- When moving to the other workq's we tightened up some object states
  and some lock handling.
- Properly syncs adds/deletes
- minor code cleanups
  - directly reference fc_host_attrs, rather than through attribute
    macros
  - flush the right workq on delayed work cancel failures.

Large kudos to Michael Reed who has been working this issue for the last
month.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 13:25:16 -05:00
Andreas Herrmann 6b7281d0a0 [SCSI] fc transport: add permanent_port_name fc_host attribute
Add fc_host attribute permanent_port_name which is
used to show the port name of the primary port -
the port that initially logged into the fabric.

For a virtual port (registered via the primary port with
FDISC command) it is useful to know not only its (virtual)
port name but also the permanent port name.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:48 -06:00
James.Smart@Emulex.Com 42e33148df [SCSI] fix for fc transport recursion problem.
In the scenario that a link was broken, the devloss timer for each
rport was expire at roughly the same time, causing lots of "delete"
workqueue items being queued. Depth is dependent upon the number of
rports that were on the link.

The rport target remove calls were calling flush_scheduled_work(),
which would interrupt the stream, and start the next workqueue item,
which did the same thing, and so on until recursion depth was large.

This fix stops the recursion in the initial delete path, and pushes it
off to a host-level work item that reaps the dead rports.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 19:22:14 -08:00
James Bottomley 849a8924a6 Merge by Hand
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and
scsi_transport_fc.h

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04 22:29:52 -06:00
Tim Schmielau 4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
James.Smart@Emulex.Com 19a7b4aebf [SCSI] update fc_transport for removal of block/unblock functions
We recently went back to implement a board reset. When we perform the
reset, we wanted to tear down the internal data structures and rebuild
them. Unfortunately, when it came to the rport structure, things were
odd. If we deleted them, the scsi targets and sdevs would be
torn down. Not a good thing for a temporary reset. We could block the
rports, but we either maintain the internal structures to keep the
rport reference (perhaps even replicating what's in the transport),
or we have to fatten the fc transport with new search routines to find
the rport (and deal with a case of a dangling rport that the driver
forgets).

It dawned on me that we had actually reached this state incorrectly.
When the fc transport first started, we did the block/unblock first, then
added the rport interface. The purpose of block/unblock is to hide the
temporary disappearance of the rport (e.g. being deleted, then readded).
Why are we making the driver do the block/unblock ? We should be making
the transport have only an rport add/delete, and the let the transport
handle the block/unblock.

So... This patch removes the existing fc_remote_port_block/unblock
functions. It moves the block/unblock functionality into the
fc_remote_port_add/delete functions.  Updates for the lpfc driver are
included. Qlogic driver updates are also enclosed, thanks to the
contributions of Andrew Vasquez. [Note: the qla2xxx changes are
relative to the scsi-misc-2.6 tree as of this morning - which does
not include the recent patches sent by Andrew]. The zfcp driver does
not use the block/unblock functions.

One last comment: The resulting behavior feels very clean. The LLDD is
concerned only with add/delete, which corresponds to the physical
disappearance.  However, the fact that the scsi target and sdevs are
not immediately torn down after the LLDD calls delete causes an
interesting scenario... the midlayer can call the xxx_slave_alloc and
xxx_queuecommand functions with a sdev that is at the location the
rport used to be. The driver must validate the device exists when it
first enters these functions. In thinking about it, this has always
been the case for the LLDD and these routines. The existing drivers
already check for existence. However, this highlights that simple
validation via data structure dereferencing needs to be watched.
To deal with this, a new transport function, fc_remote_port_chkready()
was created that LLDDs should call when they first enter these two
routines. It validates the rport state, and returns a scsi result
which could be returned. In addition to solving the above, it also
creates consistent behavior from the LLDD's when the block and deletes
are occuring.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:20:07 -05:00
Andrew Vasquez 91ca7b01ec [SCSI] Add an 'Issue LIP' device attribute in fc_transport class
Ok, here's a patch to add such a common API for fc transport users.
Relevant LLD changes (lpfc and qla2xxx) also present.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:35:25 -05:00
Andreas Herrmann 1832a5862f [SCSI] change port speed definitions for scsi_transport_fc
obviously FC Port Speeds in scsi_transport_fc.h are defined according
to FC-HBA:

#define FC_PORTSPEED_1GBIT              1
#define FC_PORTSPEED_2GBIT              2
#define FC_PORTSPEED_10GBIT             4
#define FC_PORTSPEED_4GBIT              8

Problem is, whoever invented FC-HBA did not care about FC-FS or
FC-GS-x. Following FC-FS/FC-GS-x defintions of port speeds would look
like:

1 GBit: 0x0001
2 GBit: 0x0002
4 GBit: 0x0004
10GBit: 0x0008

(and new in FC-LS:
8 Gbit: 0x0010
16GBit: 0x0020)

I really appreciate if scsi_transport_fc.h would define port speeds
according to FC-GS-x/FC-FS. Thus mapping of port speed capabilities to
values defined in scsi_transport_fc.h can be avoided in the LLDD.

Attached is a patch to change the definitions.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-16 11:25:50 -04:00
Andrew Vasquez 218fba0004 [SCSI] fc_transport: Generalize WWN to u64 interger conversions.
On some platforms the hard-casting of 8 byte node_name and
port_name arrays to an u64 would cause unaligned-access
warnings.  Generalize the conversions with a transport
helper function which performs consistent shifting of WWN
bytes.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-10 11:10:43 -05:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00