Commit Graph

842 Commits

Author SHA1 Message Date
Laszlo Kajan 3c00bb9649 Input: ALPS - fix forward/back buttons reversed on Acer 5520-5290
ALPS_FW_BK_1 protocol flavor seems to have forward and backward
keys reversed.

Signed-off-by: Laszlo Kajan <kajla@bioinfo.pl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-18 00:39:55 -04:00
Dmitry Torokhov 1db3a3453f Input: ALPS - put secondary device in proper place in sysfs
Secondary input device did not have parent set up causing it
to appear in the root of sysfs device hierarchy.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-18 00:29:18 -04:00
Ping Cheng 0e1763f530 Input: wacom - add support for Bamboo1, BambooFun, and Cintiq 12WX
Add support for new wacom tablets - Bamboo1, BambooFun, and Cintiq 12WX

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:54:38 -04:00
Andrew Morton 05be5fc4c7 Input: ads7846 - fix uninitialized var warning
drivers/input/touchscreen/ads7846.c: In function 'ads7846_read12_ser':
drivers/input/touchscreen/ads7846.c:216: warning: 'sample' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:54:13 -04:00
Thomas Bogendoerfer f178244712 Input: i8042 - add SNI RM support
SNI RM200 don't have the i8042 controller connected to the EISA bus,
but have a second address range for onboard devices. This patch handles
the two possible address ranges for the i8042 on SNI RMs.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:54:06 -04:00
Jiri Kosina 2a2dcd65e2 Input: i8042 - add Lenovo 3000 N100 to nomux blacklist
Lenovo 3000 N100 needs entry in nomux blacklist.

Reported-by: Christopher Desjardins <cddesjardins@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:54:00 -04:00
Roland Dreier d38501a379 Input: i8042 - fix warning on non-x86 builds
Commit c18bab80 ("Input: i8042 - non-x86 build fix") introduced the
following warning on non-x86 builds:

    drivers/input/serio/i8042.c: In function 'i8042_probe':
    drivers/input/serio/i8042.c:1154: warning: unused variable 'param'

Fix this by moving the parameter variable declaration into the #ifdef too.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:53:52 -04:00
Yoichi Yuasa 3c514387bd Input: cobalt_btns - assorted fixes
- fix compile errors (keymap is in bdev, not pdev)
 - cdev is no more (must use dev.parent)
 - update copiright notice

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:52:37 -04:00
Thomas Bogendoerfer f47831faba i8042: use SGI_HAS_I8042 to select SGI i8042 handlinig
Use SGI_HAS_I8042 to select SGI i8042 handling

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10 18:01:20 -07:00
Randy Dunlap 1913130553 input: add I2C to config since the driver makes several i2c*() calls
Add to help text that the Intel I2C ICH (i801) driver is also needed
for this kernel.

Add LEDS_CLASS to config since the driver makes les_classdev_*() calls:
ERROR: "led_classdev_register" [drivers/input/misc/apanel.ko] undefined!
ERROR: "__led_classdev_unregister" [drivers/input/misc/apanel.ko]
undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:18 -08:00
David Howells b920de1b77 mn10300: add the MN10300/AM33 architecture to the kernel
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00
Linus Torvalds 6e5565f949 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits)
  Input: i8042 - non-x86 build fix
  Input: pxa27x_keypad - also enable on PXA3xx
  Input: pxa27x_keypad - add debounce_interval to the keypad platform data
  Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
  Input: pxa27x_keypad - enable rotary encoders and direct keys
  Input: pxa27x_keypad - introduce pxa27x_keypad_config()
  Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
  Input: pxa27x_keypad - remove pin configuration from the driver
  Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
  Input: constify function pointer tables (seq_operations)
  Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
  Input: i8042 - enable DMI quirks on x86-64
  Input: i8042 - add Dritek quirk for Acer Aspire 9110
  Input: add input event to APM event bridge
  Input: mousedev - use BIT_MASK instead of BIT
  Input: remove duplicate includes
  Input: remove cdev from input_dev structure
  Input: remove duplicated headers in drivers/char/keyboard.c
  Input: i8042 - add Dritek keyboard extension quirk
  Input: add Tosa keyboard driver
  ...
2008-02-07 12:57:44 -08:00
Richard Purdie 6c152beefb leds: Standardise LED naming scheme
As discussed on LKML some notion of 'function' is needed in
LED naming. This patch adds this to the documentation and
standardises existing LED drivers.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:47:00 +00:00
Jeff Garzik 15aafa2f9d Remove pointless casts from void pointers
Mostly in and around irq handlers.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Karsten Keil <kkeil@suse.de>
Acked-by: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Dmitry Torokhov 03366e7b9b Merge branch 'pxa-keypad' 2008-02-06 00:54:05 -05:00
Andrew Morton c18bab80d1 Input: i8042 - non-x86 build fix
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-02-06 00:48:15 -05:00
Joe Perches 5047fabac1 drivers/input/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:15:20 +02:00
Andre Haupt 17a61cdfc5 jonada720: remove duplicate include
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 16:08:09 +02:00
Andre Haupt 8340c103d7 bf54x: remove duplicate include
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 16:04:56 +02:00
Andre Haupt f639416325 gameport: remove duplicate include
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 16:03:50 +02:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Eric Miao e0f2677f0d Input: pxa27x_keypad - also enable on PXA3xx
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:59:31 -05:00
Eric Miao 76cb44e1a8 Input: pxa27x_keypad - add debounce_interval to the keypad platform data
Currently, only one debounce_interval is introduced for both direct and
matrix keys. This is true in most cases, although the keypad controller
supports different debounce for direct/matrix keys.

Some platforms do require this to be tuned, instead of the default
reset value of 100ms.

Rotary encoder will always use zero debounce time for now to achieve
certain sensitivity.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:59:23 -05:00
Eric Miao 9c60debd2a Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
1. use ioremap() for registers access, this improves the portability
   of the driver (e.g. same IP on different processor with different
   I/O memory range), and make it possible to remove those registers
   definition in pxa-regs.h as PXA is undergoing a clean-up of that
   header file

2. use device specific IRQ instead of hardcoded IRQ_KEYPAD, same
   reason as above

3. clean up the error handling path in _probe()

4. remove DRIVER_NAME and use pdev->name when necessary, we don't
   actually need a constant string literals

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:59:15 -05:00
Eric Miao 62059d9e91 Input: pxa27x_keypad - enable rotary encoders and direct keys
1. Rotary encoder events can be configured either as relative events
   as the legacy code does or as any specified key code, this is
   useful on some platform which uses the rotary keys as
   KEY_{UP/DOWN/LEFT/RIGHT}

2. Add support for direct keys, the corresponding keycodes for each
   direct key can now be specified within the platform data

3. Remove the direct/rotary key detection code from the IRQ handler
   to dedicated functions to improve readability

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:59:03 -05:00
Eric Miao d7416f9eaa Input: pxa27x_keypad - introduce pxa27x_keypad_config()
Introduce pxa27x_keypad_config() for keypad registers configuration
and remove the reg_kpc, reg_kprec from platform data structure
so that configurations of keypad registers can be centralized to a
single function.

It can also be re-used when resuming.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:58:52 -05:00
Eric Miao 1814db6969 Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
1. Introduce the "struct pxa27x_keypad" structure for driver specific
    information, such as "struct clk", generated matrix key codes and
    so on

 2. Use KEY() macro to define matrix keys, instead of original 8x8 map
    this makes definition easier with keypad where keys are sparse

 3. Keep a generated array in "struct pxa27x_keypad" for fast lookup

 4. Separate the matrix scan into a dedicated function for readability
    and report only those keys whose state has been changed, instead
    of report all states

 5. Make use of KPAS to decide the faster path if only one key has been
    detected

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:58:37 -05:00
Eric Miao 1a1cd739a4 Input: pxa27x_keypad - remove pin configuration from the driver
The pin configurations will slowly be moved to the board specific code
at initialization thus to make the driver more generic.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:58:00 -05:00
Eric Miao 0e5f11aa80 Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
The controller should really be called keypad, and also align
the naming of functions and structures to use "pxa27x_keypad"
as prefix, instead of "pxakbd".

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:56:46 -05:00
Jan Engelhardt cec69c376b Input: constify function pointer tables (seq_operations)
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31 00:43:32 -05:00
Jiri Kosina 3f79b1e940 Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
Reported-by: Hans Aschauer <Hans.Aschauer@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30 16:34:52 -05:00
Bruce Duncan b4d62de162 Input: i8042 - enable DMI quirks on x86-64
If firmware does not implement AUX_LOOP comand in 32 bit mode it
is unlikely to implement it in 64 bit mode. Same goes for active
multiplexing. See:

http://bugzilla.kernel.org/show_bug.cgi?id=9664

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30 16:34:34 -05:00
Carlos Corbacho 5799ddb54e Input: i8042 - add Dritek quirk for Acer Aspire 9110
The Acer Aspire 9110 series also requires the Dritek quirk to enable the
extra scancodes.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30 16:34:12 -05:00
Richard Purdie e17bb1de3b Input: add input event to APM event bridge
This patch adds a very simple input power event to APM user suspend
event bridge. Its currently only works for the systems using the
emulated APM driver but could easily be extended to work with anything
with a true APM BIOS too.

This covers a standard embedded system need which is to suspend when the
user presses a suspend button. It leaves options open to system
integrators to ignore (or unload) this code and implement their own more
complex event handling system.

Its hidden behind the EMBEDDED Kconfig option since its only likely to
be of use to embedded style systems. It can be built as a module so the
"hardcoded" policy can easily be removed from the kernel at runtime if
desired too.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30 16:33:59 -05:00
Dmitry Torokhov d182c10c84 Input: mousedev - use BIT_MASK instead of BIT
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30 16:33:40 -05:00
Ingo Molnar 41e191e85a x86: replace outb_p() with udelay(2) in drivers/input/mouse/pc110pad.c
replace outb_p() with udelay(2). This is a real ISA device so it likely
needs this particular delay.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:24 +01:00
Richard Purdie ca4d6cfcee [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
This patch refactors the code in corgi_lcd.c moving it to the board
specific corgi and spitz files where appropriate instead of the
existing ifdef mess which hinders readability.

Fix spitz_get_hsync_len() to call get_hsync_invperiod so pxafb can be
compiled as a module.

The confusing variables which represent the inverse horizintal sync
period are renamed to "invperiod" consistently.

An incorrect comment in corgi_ts.c is also corrected.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:13:25 +00:00
Sam Ravnborg 2ad913babd [SPARC64]: Fix section error in sparcspkr
With a sparc64 defconfig modified to set CONFIG_HOTPLUG=n
the following error happened during link of vmlinux:

local symbol 0: discarded in section `.devexit.text' from drivers/built-in.o
local symbol 1: discarded in section `.devexit.text' from drivers/built-in.o

(The error message above is from kbuild.git but it happens in mainline too)

The error happens becase there is a reference from .text/.data to a
function marked __devexit. With CONFIG_HOTPLUG=n all code marked
__devexit are discarded and the linker complains.

It was tracked down to sparcspkr.c which were missing __devexit_p()
around the function pointers.

Unfortunately modpost did not catch this since modpost do not warn
about references from .data to .devexit from variables named *_driver.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21 22:34:31 -08:00
Andre Haupt e2c75391dd Input: remove duplicate includes
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:16:15 -05:00
Dmitry Torokhov 0c1efd3653 Input: remove cdev from input_dev structure
Cdev field was obsolete and provided only for backward compatibility
since conversion of input core from class devices to regular devices.
It is time to remove it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:08 -05:00
Carlos Corbacho 8987fec0de Input: i8042 - add Dritek keyboard extension quirk
Some Wistron based laptops need us to explicitly enable the 'Dritek
keyboard extension' to make their extra keys start generating scancodes.
Originally, this was just confined to older laptops, but a few Acer
laptops have turned up in 2007 that also need this again.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:08 -05:00
Dmitry Baryshkov 93e9012f40 Input: add Tosa keyboard driver
Add keyboard support on tosa (Sharp Zaurus SL-6000x).
Largely based on patches by Dirk Opfer.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
Stephen Hemminger 52fe0cdb09 Input: add driver for Fujitsu application buttons
This driver supports the application buttons on some Fujitsu Lifebook
laptops.  It is based on the earlier apanel driver done by Jochen Eisenger,
but with many changes.  The original driver used ioctl's and a separate
user space program (see http://apanel.sourceforge.net).  This driver hooks
into the input subsystem so that the normal keys act as expected without a
daemon.  In addition to buttons, the Mail Led is handled via LEDs class
device.

The driver now supports redefinable keymaps and no longer has to have a DMI
table for all Fujitsu laptops.

I thought about mixing this driver should be integrated into the Fujitsu
laptop extras driver that handles backlight, but rejected the idea because
it wasn't clear if all the Fujitsu laptops supported both.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
David Brownell fbb38e30e4 Input: ads7846 - stop updating dev->power.power_state
This stops the ads7846 driver from using dev->power.power_state; that field is
deprecated (overdue for removal) and the only reason to update it was to make
the /sys/devices/.../power/state files (now removed) work better.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
Julia Lawall 3b04a61107 Input: drop redundant includes of moduleparam.h
Drop #include <linux/moduleparam.h> in files that also include
linux/module.h, since module.h includes moduleparam.h already.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
Stephen Hemminger 374766bc2a Input: implement proper timer rounding for polled devices
Rounding doesn't matter for the first tick, but we want
succeeding ticks to be aligned on second boundary if poll
interval is large enough.

Also: cancel_rearming_delayed_workqueue is marked as obsolete
in workqueue.h so use cancel_delayed_work_sync.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
Dmitry Torokhov 4615e33f43 Input: iforce - don't access input_dev->private directly
input_{get|set}_drvdata() helpers should be used instead.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
Dmitry Torokhov a8399c512b Input: i8042 - use synchronize_irq() instead of synchronize_sched()
RT guys advised me that in their kernels synchronize_sched() will not
work to ensure that all IRQ handlers run to their completion and that
synchronize_irq() should be used instead.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:07 -05:00
Dmitry Torokhov f0b92b961b Input: atkbd - remove unneeded synchronize_sched()
atkbd_disable() provides all necessary synchronization with
atkbd_interrupt().

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:06 -05:00
Dmitry Torokhov b037b08e59 Input: cobalt_btns - add support for loadable keymaps
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:06 -05:00