Commit Graph

867 Commits

Author SHA1 Message Date
Mel Gorman 599d0c954f mm, vmscan: move LRU lists to node
This moves the LRU lists from the zone to the node and related data such
as counters, tracing, congestion tracking and writeback tracking.

Unfortunately, due to reclaim and compaction retry logic, it is
necessary to account for the number of LRU pages on both zone and node
logic.  Most reclaim logic is based on the node counters but the retry
logic uses the zone counters which do not distinguish inactive and
active sizes.  It would be possible to leave the LRU counters on a
per-zone basis but it's a heavier calculation across multiple cache
lines that is much more frequent than the retry checks.

Other than the LRU counters, this is mostly a mechanical patch but note
that it introduces a number of anomalies.  For example, the scans are
per-zone but using per-node counters.  We also mark a node as congested
when a zone is congested.  This causes weird problems that are fixed
later but is easier to review.

In the event that there is excessive overhead on 32-bit systems due to
the nodes being on LRU then there are two potential solutions

1. Long-term isolation of highmem pages when reclaim is lowmem

   When pages are skipped, they are immediately added back onto the LRU
   list. If lowmem reclaim persisted for long periods of time, the same
   highmem pages get continually scanned. The idea would be that lowmem
   keeps those pages on a separate list until a reclaim for highmem pages
   arrives that splices the highmem pages back onto the LRU. It potentially
   could be implemented similar to the UNEVICTABLE list.

   That would reduce the skip rate with the potential corner case is that
   highmem pages have to be scanned and reclaimed to free lowmem slab pages.

2. Linear scan lowmem pages if the initial LRU shrink fails

   This will break LRU ordering but may be preferable and faster during
   memory pressure than skipping LRU pages.

Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Linus Torvalds 6453dbdda3 Power management material for v4.8-rc1
- Rework the cpufreq governor interface to make it more straightforward
    and modify the conservative governor to avoid using transition
    notifications (Rafael Wysocki).
 
  - Rework the handling of frequency tables by the cpufreq core to make
    it more efficient (Viresh Kumar).
 
  - Modify the schedutil governor to reduce the number of wakeups it
    causes to occur in cases when the CPU frequency doesn't need to be
    changed (Steve Muckle, Viresh Kumar).
 
  - Fix some minor issues and clean up code in the cpufreq core and
    governors (Rafael Wysocki, Viresh Kumar).
 
  - Add Intel Broxton support to the intel_pstate driver (Srinivas
    Pandruvada).
 
  - Fix problems related to the config TDP feature and to the validity
    of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka,
    Srinivas Pandruvada).
 
  - Make intel_pstate update the cpu_frequency tracepoint even if
    the frequency doesn't change to avoid confusing powertop (Rafael
    Wysocki).
 
  - Clean up the usage of __init/__initdata in intel_pstate, mark some
    of its internal variables as __read_mostly and drop an unused
    structure element from it (Jisheng Zhang, Carsten Emde).
 
  - Clean up the usage of some duplicate MSR symbols in intel_pstate
    and turbostat (Srinivas Pandruvada).
 
  - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay
    Adiga, Viresh Kumar, Ben Dooks).
 
  - Fix a regression (introduced during the 4.5 cycle) in the
    pcc-cpufreq driver by reverting the problematic commit (Andreas
    Herrmann).
 
  - Add support for Intel Denverton to intel_idle, clean up Broxton
    support in it and make it explicitly non-modular (Jacob Pan,
    Jan Beulich, Paul Gortmaker).
 
  - Add support for Denverton and Ivy Bridge server to the Intel RAPL
    power capping driver and make it more careful about the handing
    of MSRs that may not be present (Jacob Pan, Xiaolong Wang).
 
  - Fix resume from hibernation on x86-64 by making the CPU offline
    during resume avoid using MONITOR/MWAIT in the "play dead" loop
    which may lead to an inadvertent "revival" of a "dead" CPU and
    a page fault leading to a kernel crash from it (Rafael Wysocki).
 
  - Make memory management during resume from hibernation more
    straightforward (Rafael Wysocki).
 
  - Add debug features that should help to detect problems related
    to hibernation and resume from it (Rafael Wysocki, Chen Yu).
 
  - Clean up hibernation core somewhat (Rafael Wysocki).
 
  - Prevent KASAN from instrumenting the hibernation core which leads
    to large numbers of false-positives from it (James Morse).
 
  - Prevent PM (hibernate and suspend) notifiers from being called
    during the cleanup phase if they have not been called during the
    corresponding preparation phase which is possible if one of the
    other notifiers returns an error at that time (Lianwei Wang).
 
  - Improve suspend-related debug printout in the tasks freezer and
    clean up suspend-related console handling (Roger Lu, Borislav
    Petkov).
 
  - Update the AnalyzeSuspend script in the kernel sources to
    version 4.2 (Todd Brandt).
 
  - Modify the generic power domains framework to make it handle
    system suspend/resume better (Ulf Hansson).
 
  - Make the runtime PM framework avoid resuming devices synchronously
    when user space changes the runtime PM settings for them and
    improve its error reporting (Rafael Wysocki, Linus Walleij).
 
  - Fix error paths in devfreq drivers (exynos, exynos-ppmu, exynos-bus)
    and in the core, make some devfreq code explicitly non-modular and
    change some of it into tristate (Bartlomiej Zolnierkiewicz,
    Peter Chen, Paul Gortmaker).
 
  - Add DT support to the generic PM clocks management code and make
    it export some more symbols (Jon Hunter, Paul Gortmaker).
 
  - Make the PCI PM core code slightly more robust against possible
    driver errors (Andy Shevchenko).
 
  - Make it possible to change DESTDIR and PREFIX in turbostat
    (Andy Shevchenko).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXl7/dAAoJEILEb/54YlRx+VgQAIQJOWvxKew3Yl02c/sdj9OT
 5VNnFrzGzdcAPofvvG9qGq8B0Es1vYehJpwwOB21ri8EvYv0riIiU1yrqslObojQ
 oaZOkSBpbIoKjGR4CpYA/A+feE+8EqIBdPGd+lx5a6oRdUi7tRVHBG9lyLO3FB/i
 jan1q8dMpZsmu+Y+rVVHGnCVuIlIEqr2ZnZfCwDAulO2Arp/QFAh4kH08ELATvrl
 bkPa25vq7/VMP/vCDzrfZKD5mUuKogIRu/J5wx4py1nE+FB35cKKyqBOgklLwAeY
 UI8vjDhr/myNUs54AZlktOkq47TCYvjvhX9kmOxBjuWqFbRusU012IRek1fYPRIV
 ZqbkqNX7UEVQwunAEg9AyFwyzEtOht93dQDT5RLEd4QzKuM76gmHpLeTGGMzE+nu
 FnmF9JGl4DVwqpZl9yU2+hR2Mt3bP8OF8qYmNiGUB3KO4emPslhSd+6y8liA5Bx2
 SJf0Gb//vaHCh3/uMnwAonYPqRkZvBLOMwuL1VUjNQfRMnQtDdgHMYB1aT/EglPA
 8ww6j4J8rVRLAxvYQ3UEmNA/vBNclKXblRR18+JddEZP9/oX0ATfwnCCUpr839uk
 xxyQhrm4/AI60+PHWCX4GG80YrKdOGTkF7LXCQZanVWjjuyF17rufegZ2YWLT07v
 JU1Cmumfdy2jJluT8xsR
 =uVGz
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael  Wysocki:
 "Again, the majority of changes go into the cpufreq subsystem, but
  there are no big features this time.  The cpufreq changes that stand
  out somewhat are the governor interface rework and improvements
  related to the handling of frequency tables.  Apart from those, there
  are fixes and new device/CPU IDs in drivers, cleanups and an
  improvement of the new schedutil governor.

  Next, there are some changes in the hibernation core, including a fix
  for a nasty problem related to the MONITOR/MWAIT usage by CPU offline
  during resume from hibernation, a few core improvements related to
  memory management during resume, a couple of additional debug features
  and cleanups.

  Finally, we have some fixes and cleanups in the devfreq subsystem,
  generic power domains framework improvements related to system
  suspend/resume, support for some new chips in intel_idle and in the
  power capping RAPL driver, a new version of the AnalyzeSuspend utility
  and some assorted fixes and cleanups.

  Specifics:

   - Rework the cpufreq governor interface to make it more
     straightforward and modify the conservative governor to avoid using
     transition notifications (Rafael Wysocki).

   - Rework the handling of frequency tables by the cpufreq core to make
     it more efficient (Viresh Kumar).

   - Modify the schedutil governor to reduce the number of wakeups it
     causes to occur in cases when the CPU frequency doesn't need to be
     changed (Steve Muckle, Viresh Kumar).

   - Fix some minor issues and clean up code in the cpufreq core and
     governors (Rafael Wysocki, Viresh Kumar).

   - Add Intel Broxton support to the intel_pstate driver (Srinivas
     Pandruvada).

   - Fix problems related to the config TDP feature and to the validity
     of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka,
     Srinivas Pandruvada).

   - Make intel_pstate update the cpu_frequency tracepoint even if the
     frequency doesn't change to avoid confusing powertop (Rafael
     Wysocki).

   - Clean up the usage of __init/__initdata in intel_pstate, mark some
     of its internal variables as __read_mostly and drop an unused
     structure element from it (Jisheng Zhang, Carsten Emde).

   - Clean up the usage of some duplicate MSR symbols in intel_pstate
     and turbostat (Srinivas Pandruvada).

   - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay
     Adiga, Viresh Kumar, Ben Dooks).

   - Fix a regression (introduced during the 4.5 cycle) in the
     pcc-cpufreq driver by reverting the problematic commit (Andreas
     Herrmann).

   - Add support for Intel Denverton to intel_idle, clean up Broxton
     support in it and make it explicitly non-modular (Jacob Pan, Jan
     Beulich, Paul Gortmaker).

   - Add support for Denverton and Ivy Bridge server to the Intel RAPL
     power capping driver and make it more careful about the handing of
     MSRs that may not be present (Jacob Pan, Xiaolong Wang).

   - Fix resume from hibernation on x86-64 by making the CPU offline
     during resume avoid using MONITOR/MWAIT in the "play dead" loop
     which may lead to an inadvertent "revival" of a "dead" CPU and a
     page fault leading to a kernel crash from it (Rafael Wysocki).

   - Make memory management during resume from hibernation more
     straightforward (Rafael Wysocki).

   - Add debug features that should help to detect problems related to
     hibernation and resume from it (Rafael Wysocki, Chen Yu).

   - Clean up hibernation core somewhat (Rafael Wysocki).

   - Prevent KASAN from instrumenting the hibernation core which leads
     to large numbers of false-positives from it (James Morse).

   - Prevent PM (hibernate and suspend) notifiers from being called
     during the cleanup phase if they have not been called during the
     corresponding preparation phase which is possible if one of the
     other notifiers returns an error at that time (Lianwei Wang).

   - Improve suspend-related debug printout in the tasks freezer and
     clean up suspend-related console handling (Roger Lu, Borislav
     Petkov).

   - Update the AnalyzeSuspend script in the kernel sources to version
     4.2 (Todd Brandt).

   - Modify the generic power domains framework to make it handle system
     suspend/resume better (Ulf Hansson).

   - Make the runtime PM framework avoid resuming devices synchronously
     when user space changes the runtime PM settings for them and
     improve its error reporting (Rafael Wysocki, Linus Walleij).

   - Fix error paths in devfreq drivers (exynos, exynos-ppmu,
     exynos-bus) and in the core, make some devfreq code explicitly
     non-modular and change some of it into tristate (Bartlomiej
     Zolnierkiewicz, Peter Chen, Paul Gortmaker).

   - Add DT support to the generic PM clocks management code and make it
     export some more symbols (Jon Hunter, Paul Gortmaker).

   - Make the PCI PM core code slightly more robust against possible
     driver errors (Andy Shevchenko).

   - Make it possible to change DESTDIR and PREFIX in turbostat (Andy
     Shevchenko)"

* tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
  Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency"
  PM / hibernate: Introduce test_resume mode for hibernation
  cpufreq: export cpufreq_driver_resolve_freq()
  cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index()
  PCI / PM: check all fields in pci_set_platform_pm()
  cpufreq: acpi-cpufreq: use cached frequency mapping when possible
  cpufreq: schedutil: map raw required frequency to driver frequency
  cpufreq: add cpufreq_driver_resolve_freq()
  cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT
  intel_pstate: Update cpu_frequency tracepoint every time
  cpufreq: intel_pstate: clean remnant struct element
  PM / tools: scripts: AnalyzeSuspend v4.2
  x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
  cpufreq: powernv: Replacing pstate_id with frequency table index
  intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()
  PM / hibernate: Image data protection during restoration
  PM / hibernate: Add missing braces in __register_nosave_region()
  PM / hibernate: Clean up comments in snapshot.c
  PM / hibernate: Clean up function headers in snapshot.c
  PM / hibernate: Add missing braces in hibernate_setup()
  ...
2016-07-26 17:29:07 -07:00
Linus Torvalds d05d7f4079 Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:

   - the big change is the cleanup from Mike Christie, cleaning up our
     uses of command types and modified flags.  This is what will throw
     some merge conflicts

   - regression fix for the above for btrfs, from Vincent

   - following up to the above, better packing of struct request from
     Christoph

   - a 2038 fix for blktrace from Arnd

   - a few trivial/spelling fixes from Bart Van Assche

   - a front merge check fix from Damien, which could cause issues on
     SMR drives

   - Atari partition fix from Gabriel

   - convert cfq to highres timers, since jiffies isn't granular enough
     for some devices these days.  From Jan and Jeff

   - CFQ priority boost fix idle classes, from me

   - cleanup series from Ming, improving our bio/bvec iteration

   - a direct issue fix for blk-mq from Omar

   - fix for plug merging not involving the IO scheduler, like we do for
     other types of merges.  From Tahsin

   - expose DAX type internally and through sysfs.  From Toshi and Yigal

* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
  block: Fix front merge check
  block: do not merge requests without consulting with io scheduler
  block: Fix spelling in a source code comment
  block: expose QUEUE_FLAG_DAX in sysfs
  block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
  Btrfs: fix comparison in __btrfs_map_block()
  block: atari: Return early for unsupported sector size
  Doc: block: Fix a typo in queue-sysfs.txt
  cfq-iosched: Charge at least 1 jiffie instead of 1 ns
  cfq-iosched: Fix regression in bonnie++ rewrite performance
  cfq-iosched: Convert slice_resid from u64 to s64
  block: Convert fifo_time from ulong to u64
  blktrace: avoid using timespec
  block/blk-cgroup.c: Declare local symbols static
  block/bio-integrity.c: Add #include "blk.h"
  block/partition-generic.c: Remove a set-but-not-used variable
  block: bio: kill BIO_MAX_SIZE
  cfq-iosched: temporarily boost queue priority for idle classes
  block: drbd: avoid to use BIO_MAX_SIZE
  block: bio: remove BIO_MAX_SECTORS
  ...
2016-07-26 15:03:07 -07:00
Chen Yu fe12c00d21 PM / hibernate: Introduce test_resume mode for hibernation
test_resume mode is to verify if the snapshot data
written to swap device can be successfully restored
to memory. It is useful to ease the debugging process
on hibernation, since this mode can not only bypass
the BIOSes/bootloader, but also the system re-initialization.

To avoid the risk to break the filesystm on persistent storage,
this patch resumes the image with tasks frozen.

For example:
echo test_resume > /sys/power/disk
echo disk > /sys/power/state

[  187.306470] PM: Image saving progress:  70%
[  187.395298] PM: Image saving progress:  80%
[  187.476697] PM: Image saving progress:  90%
[  187.554641] PM: Image saving done.
[  187.558896] PM: Wrote 594600 kbytes in 0.90 seconds (660.66 MB/s)
[  187.566000] PM: S|
[  187.589742] PM: Basic memory bitmaps freed
[  187.594694] PM: Checking hibernation image
[  187.599865] PM: Image signature found, resuming
[  187.605209] PM: Loading hibernation image.
[  187.665753] PM: Basic memory bitmaps created
[  187.691397] PM: Using 3 thread(s) for decompression.
[  187.691397] PM: Loading and decompressing image data (148650 pages)...
[  187.889719] PM: Image loading progress:   0%
[  188.100452] PM: Image loading progress:  10%
[  188.244781] PM: Image loading progress:  20%
[  189.057305] PM: Image loading done.
[  189.068793] PM: Image successfully loaded

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-22 13:57:23 +02:00
Rafael J. Wysocki 406f992e4a x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
On Intel hardware, native_play_dead() uses mwait_play_dead() by
default and only falls back to the other methods if that fails.
That also happens during resume from hibernation, when the restore
(boot) kernel runs disable_nonboot_cpus() to take all of the CPUs
except for the boot one offline.

However, that is problematic, because the address passed to
__monitor() in mwait_play_dead() is likely to be written to in the
last phase of hibernate image restoration and that causes the "dead"
CPU to start executing instructions again.  Unfortunately, the page
containing the address in that CPU's instruction pointer may not be
valid any more at that point.

First, that page may have been overwritten with image kernel memory
contents already, so the instructions the CPU attempts to execute may
simply be invalid.  Second, the page tables previously used by that
CPU may have been overwritten by image kernel memory contents, so the
address in its instruction pointer is impossible to resolve then.

A report from Varun Koyyalagunta and investigation carried out by
Chen Yu show that the latter sometimes happens in practice.

To prevent it from happening, temporarily change the smp_ops.play_dead
pointer during resume from hibernation so that it points to a special
"play dead" routine which uses hlt_play_dead() and avoids the
inadvertent "revivals" of "dead" CPUs this way.

A slightly unpleasant consequence of this change is that if the
system is hibernated with one or more CPUs offline, it will generally
draw more power after resume than it did before hibernation, because
the physical state entered by CPUs via hlt_play_dead() is higher-power
than the mwait_play_dead() one in the majority of cases.  It is
possible to work around this, but it is unclear how much of a problem
that's going to be in practice, so the workaround will be implemented
later if it turns out to be necessary.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=106371
Reported-by: Varun Koyyalagunta <cpudebug@centtech.com>
Original-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 22:42:48 +02:00
Rafael J. Wysocki 4c0b6c10fb PM / hibernate: Image data protection during restoration
Make it possible to protect all pages holding image data during
hibernate image restoration by setting them read-only (so as to
catch attempts to write to those pages after image data have been
stored in them).

This adds overhead to image restoration code (it may cause large
page mappings to be split as a result of page flags changes) and
the errors it protects against should never happen in theory, so
the feature is only active after passing hibernate=protect_image
to the command line of the restore kernel.

Also it only is built if CONFIG_DEBUG_RODATA is set.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10 02:12:10 +02:00
Rafael J. Wysocki d5f32af310 PM / hibernate: Add missing braces in __register_nosave_region()
One branch of an if/else statement in __register_nosave_region() is
formatted against the kernel coding style which causes the code to
look slightly odd.  To fix that, add missing braces to it.

No functional changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10 01:37:35 +02:00
Rafael J. Wysocki ef96f639ea PM / hibernate: Clean up comments in snapshot.c
Many comments in kernel/power/snapshot.c do not follow the general
comment formatting rules.  They look odd, some of them are outdated
too, some are hard to parse and generally difficult to understand.

Clean them up to make them easier to comprehend.

No functional changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10 01:37:26 +02:00
Rafael J. Wysocki efd5a85242 PM / hibernate: Clean up function headers in snapshot.c
The formatting of some function headers in kernel/power/snapshot.c
is not consistent with the general kernel coding style and with the
formatting of some other function headers in the same file.

Make all of them follow the same formatting convention.

No functional changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10 01:37:20 +02:00
Rafael J. Wysocki 2f88e41a22 PM / hibernate: Add missing braces in hibernate_setup()
Make hibernate_setup() follow the coding style more closely by adding
some missing braces to the if () statement in it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10 01:37:13 +02:00
Rafael J. Wysocki 63f9ccb895 Merge back earlier suspend/hibernation changes for v4.8. 2016-07-08 23:14:17 +02:00
Ingo Molnar 9e7f7f5425 Merge branch 'x86/mm' into x86/boot, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-08 17:27:47 +02:00
Rafael J. Wysocki 307c5971c9 PM / hibernate: Recycle safe pages after image restoration
One of the memory bitmaps used by the hibernation image restoration
code is freed after the image has been loaded.

That is not quite efficient, though, because the memory pages used
for building that bitmap are known to be safe (ie. they were not
used by the image kernel before hibernation) and the arch-specific
code finalizing the image restoration may need them.  In that case
it needs to allocate those pages again via the memory management
subsystem, check if they are really safe again by consulting the
other bitmaps and so on.

To avoid that, recycle those pages by putting them into the global
list of known safe pages so that they can be given to the arch code
right away when necessary.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02 01:52:10 +02:00
Rafael J. Wysocki 6dbecfd345 PM / hibernate: Simplify mark_unsafe_pages()
Rework mark_unsafe_pages() to use a simpler method of clearing
all bits in free_pages_map and to set the bits for the "unsafe"
pages (ie. pages that were used by the image kernel before
hibernation) with the help of duplicate_memory_bitmap().

For this purpose, move the pfn_valid() check from mark_unsafe_pages()
to unpack_orig_pfns() where the "unsafe" pages are discovered.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02 01:52:09 +02:00
Rafael J. Wysocki 9c744481c0 PM / hibernate: Do not free preallocated safe pages during image restore
The core image restoration code preallocates some safe pages
(ie. pages that weren't used by the image kernel before hibernation)
for future use before allocating the bulk of memory for loading the
image data.  Those safe pages are then freed so they can be allocated
again (with the memory management subsystem's help).  That's done to
ensure that there will be enough safe pages for temporary data
structures needed during image restoration.

However, it is not really necessary to free those pages after they
have been allocated.  They can be added to the (global) list of
safe pages right away and then picked up from there when needed
without freeing.

That reduces the overhead related to using safe pages, especially
in the arch-specific code, so modify the code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02 01:52:09 +02:00
Roger Lu 7b776af66d PM / suspend: show workqueue state in suspend flow
If freezable workqueue aborts suspend flow, show
workqueue state for debug purpose.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02 01:42:48 +02:00
Lianwei Wang ea00f4f4f0 PM / sleep: make PM notifiers called symmetrically
This makes pm notifier PREPARE/POST symmetrical: if PREPARE
fails, we will only undo what ever happened on PREPARE.

It fixes the unbalanced CPU hotplug enable in CPU PM notifier.

Signed-off-by: Lianwei Wang <lianwei.wang@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-28 00:38:55 +02:00
Kees Cook 65fe935dd2 x86/KASLR, x86/power: Remove x86 hibernation restrictions
With the following fix:

  70595b479ce1 ("x86/power/64: Fix crash whan the hibernation code passes control to the image kernel")

... there is no longer a problem with hibernation resuming a
KASLR-booted kernel image, so remove the restriction.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20160613221002.GA29719@www.outflux.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-26 12:32:03 +02:00
Michal Hocko 7407054209 oom, suspend: fix oom_reaper vs. oom_killer_disable race
Tetsuo has reported the following potential oom_killer_disable vs.
oom_reaper race:

 (1) freeze_processes() starts freezing user space threads.
 (2) Somebody (maybe a kenrel thread) calls out_of_memory().
 (3) The OOM killer calls mark_oom_victim() on a user space thread
     P1 which is already in __refrigerator().
 (4) oom_killer_disable() sets oom_killer_disabled = true.
 (5) P1 leaves __refrigerator() and enters do_exit().
 (6) The OOM reaper calls exit_oom_victim(P1) before P1 can call
     exit_oom_victim(P1).
 (7) oom_killer_disable() returns while P1 not yet finished
 (8) P1 perform IO/interfere with the freezer.

This situation is unfortunate.  We cannot move oom_killer_disable after
all the freezable kernel threads are frozen because the oom victim might
depend on some of those kthreads to make a forward progress to exit so
we could deadlock.  It is also far from trivial to teach the oom_reaper
to not call exit_oom_victim() because then we would lose a guarantee of
the OOM killer and oom_killer_disable forward progress because
exit_mm->mmput might block and never call exit_oom_victim.

It seems the easiest way forward is to workaround this race by calling
try_to_freeze_tasks again after oom_killer_disable.  This will make sure
that all the tasks are frozen or it bails out.

Fixes: 449d777d7a ("mm, oom_reaper: clear TIF_MEMDIE for all tasks queued for oom_reaper")
Link: http://lkml.kernel.org/r/1466597634-16199-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24 17:23:52 -07:00
Borislav Petkov ca5f2b4c4f PM / sleep: Make pm_prepare_console() return void
Nothing is using its return value so change it to return void.

No functionality change.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-15 01:26:04 +02:00
James Morse 6783091177 PM / Hibernate: Don't let kasan instrument snapshot.c
Kasan causes the compiler to instrument C code and is used at runtime to
detect accesses to memory that has been freed, or not yet allocated.

The code in snapshot.c saves and restores memory when hibernating. This will
access whole pages in the slab cache that have both free and allocated
areas, resulting in a large number of false positives from Kasan.

Disable instrumentation of this file.

Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-14 00:38:56 +02:00
Mike Christie 162b99e311 pm: use bio op accessors
Separate the op from the rq_flag_bits and have the pm code
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie 4e49ea4a3d block/fs/drivers: remove rw argument from submit_bio
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.

Signed-off-by: Mike Christie <mchristi@redhat.com>

Fixed up fs/ext4/crypto.c

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
James Morse f6cf0545ec PM / Hibernate: Call flush_icache_range() on pages restored in-place
Some architectures require code written to memory as if it were data to be
'cleaned' from any data caches before the processor can fetch them as new
instructions.

During resume from hibernate, the snapshot code copies some pages directly,
meaning these architectures do not get a chance to perform their cache
maintenance. Modify the read and decompress code to call
flush_icache_range() on all pages that are restored, so that the restored
in-place pages are guaranteed to be executable on these architectures.

Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
[will: make clean_pages_on_* static and remove initialisers]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-28 13:35:48 +01:00
Linus Torvalds 3d66c6ba3f Power management and ACPI material for v4.6-rc1, part 2
- Fix for an intel_pstate driver issue related to the handling of
    MSR updates uncovered by the recent cpufreq rework (Rafael Wysocki).
 
  - cpufreq core cleanups related to starting governors and frequency
    synchronization during resume from system suspend and a locking
    fix for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).
 
  - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
    Michael Neuling, Richard Cochran, Shilpasri Bhat).
 
  - intel_idle driver update preventing some Skylake-H systems
    from hanging during initialization by disabling deep C-states
    mishandled by the platform in the problematic configurations (Len
    Brown).
 
  - Intel Xeon Phi Processor x200 support for intel_idle (Dasaratharaman
    Chandramouli).
 
  - cpuidle menu governor updates to make it always honor PM QoS
    latency constraints (and prevent C1 from being used as the
    fallback C-state on x86 when they are set below its exit latency)
    and to restore the previous behavior to fall back to C1 if the next
    timer event is set far enough in the future that was changed in 4.4
    which led to an energy consumption regression (Rik van Riel, Rafael
    Wysocki).
 
  - New device ID for a future AMD UART controller in the ACPI driver
    for AMD SoCs (Wang Hongcheng).
 
  - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
    scaling (AVS) driver (David Wu).
 
  - ACPI PCI resources management fix for the handling of IO space
    resources on architectures where the IO space is memory mapped
    (IA64 and ARM64) broken by the introduction of common ACPI
    resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).
 
  - Fix for the ACPI backend of the generic device properties API
    to make it parse non-device (data node only) children of an
    ACPI device correctly (Irina Tirdea).
 
  - Fixes for the handling of global suspend flags (introduced in 4.4)
    during hibernation and resume from it (Lukas Wunner).
 
  - Support for obtaining configuration information from Device Trees
    in the PM clocks framework (Jon Hunter).
 
  - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
    King, Geert Uytterhoeven).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJW9JaRAAoJEILEb/54YlRx/GAQAJujANWilWHZYm24a9JDcIE9
 rsNZIC/FdeBVilPtRTZQnig/Pj32Z4Jm7IZ/DLOq0Deu1YK/9uv3y59M3BcX6WyL
 H5VR80L8geUJZ7RRk0WfM5D4X82ovzwpE/kWt2Z7HDuvJSCBmFBZOvNrXbaRncKD
 jIvat/p6uCuxt5c08+ebnBLQ6tOs8wLTWiCx3fO128GIrGRGN2xFV6hzRWVGnJ4g
 WXGAR+AdLxRMZz4PPmqdTfRj4TNSR071GjKyaeKfZUjQGAsf5O9A77JFjeNVomDx
 g1K37Byid2bTByzVavlEXPJZ7eKb5dAhlo7IJ9HAcOAXChLqH2Czjrpd+1XjR9MF
 SV/78rCnF8eet83QYLbGV/Mzf7gbJP2Xp6wiaM22VAPpGe+sYfphJoQka9XRTfId
 OgAjyYMYdWAKo5DhxVNI8WyN0W5dsoBFPxnaUFhHSGDCIJH7Ksy20m6y3plG2Bxf
 ahoiQhmd9ohjtB5JbRnf4MY0hjekp8Srdf+DoNKsk/+JscIyROpYY3msQ3smUKo+
 f628MC/wAosMpSV+l+KOYkbjCbtB49IabWtZ//NVD9hYB3E1f6aTN59yFbWB+1rp
 L7Y8iaxzSkyJy/yYVuBal3rSk356+BvvoXBlLXmBsyu1TMlcDjALIYztSiTVT5MB
 RZBhgNwdkxNCYJfU3ex+
 =hUVj
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "The second batch of power management and ACPI updates for v4.6.

  Included are fixups on top of the previous PM/ACPI pull request and
  other material that didn't make into it but still should go into 4.6.

  Among other things, there's a fix for an intel_pstate driver issue
  uncovered by recent cpufreq changes, a workaround for a boot hang on
  Skylake-H related to the handling of deep C-states by the platform and
  a PCI/ACPI fix for the handling of IO port resources on non-x86
  architectures plus some new device IDs and similar.

  Specifics:

   - Fix for an intel_pstate driver issue related to the handling of MSR
     updates uncovered by the recent cpufreq rework (Rafael Wysocki).

   - cpufreq core cleanups related to starting governors and frequency
     synchronization during resume from system suspend and a locking fix
     for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).

   - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
     Michael Neuling, Richard Cochran, Shilpasri Bhat).

   - intel_idle driver update preventing some Skylake-H systems from
     hanging during initialization by disabling deep C-states mishandled
     by the platform in the problematic configurations (Len Brown).

   - Intel Xeon Phi Processor x200 support for intel_idle
     (Dasaratharaman Chandramouli).

   - cpuidle menu governor updates to make it always honor PM QoS
     latency constraints (and prevent C1 from being used as the fallback
     C-state on x86 when they are set below its exit latency) and to
     restore the previous behavior to fall back to C1 if the next timer
     event is set far enough in the future that was changed in 4.4 which
     led to an energy consumption regression (Rik van Riel, Rafael
     Wysocki).

   - New device ID for a future AMD UART controller in the ACPI driver
     for AMD SoCs (Wang Hongcheng).

   - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
     scaling (AVS) driver (David Wu).

   - ACPI PCI resources management fix for the handling of IO space
     resources on architectures where the IO space is memory mapped
     (IA64 and ARM64) broken by the introduction of common ACPI
     resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).

   - Fix for the ACPI backend of the generic device properties API to
     make it parse non-device (data node only) children of an ACPI
     device correctly (Irina Tirdea).

   - Fixes for the handling of global suspend flags (introduced in 4.4)
     during hibernation and resume from it (Lukas Wunner).

   - Support for obtaining configuration information from Device Trees
     in the PM clocks framework (Jon Hunter).

   - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
     King, Geert Uytterhoeven)"

* tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399
  intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
  intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate
  cpufreq: governor: Always schedule work on the CPU running update
  cpufreq: Always update current frequency before startig governor
  cpufreq: Introduce cpufreq_update_current_freq()
  cpufreq: Introduce cpufreq_start_governor()
  cpufreq: powernv: Add sysfs attributes to show throttle stats
  cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
  PCI: ACPI: IA64: fix IO port generic range check
  ACPI / util: cast data to u64 before shifting to fix sign extension
  cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
  cpuidle: menu: Fall back to polling if next timer event is near
  cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
  intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
  cpufreq: Make cpufreq_quick_get() safe to call
  ACPI / property: fix data node parsing in acpi_get_next_subnode()
  ACPI / APD: Add device HID for future AMD UART controller
  ...
2016-03-24 22:59:58 -07:00
Rafael J. Wysocki 3513ac743d Merge branches 'pm-avs', 'pm-clk', 'pm-devfreq' and 'pm-sleep'
* pm-avs:
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399

* pm-clk:
  PM / clk: Add support for obtaining clocks from device-tree

* pm-devfreq:
  PM / devfreq: Spelling s/frequnecy/frequency/

* pm-sleep:
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate
2016-03-25 00:58:18 +01:00
Lukas Wunner 276142730c PM / sleep: Clear pm_suspend_global_flags upon hibernate
When suspending to RAM, waking up and later suspending to disk,
we gratuitously runtime resume devices after the thaw phase.
This does not occur if we always suspend to RAM or always to disk.

pm_complete_with_resume_check(), which gets called from
pci_pm_complete() among others, schedules a runtime resume
if PM_SUSPEND_FLAG_FW_RESUME is set. The flag is set during
a suspend-to-RAM cycle. It is cleared at the beginning of
the suspend-to-RAM cycle but not afterwards and it is not
cleared during a suspend-to-disk cycle at all. Fix it.

Fixes: ef25ba0476 (PM / sleep: Add flags to indicate platform firmware involvement)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-23 02:43:11 +01:00
Joe Perches a395d6a7e3 kernel/...: convert pr_warning to pr_warn
Use the more common logging method with the eventual goal of removing
pr_warning altogether.

Miscellanea:

 - Realign arguments
 - Coalesce formats
 - Add missing space between a few coalesced formats

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[kernel/power/suspend.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Linus Torvalds 277edbabf6 Power management and ACPI material for v4.6-rc1, part 1
- Redesign of cpufreq governors and the intel_pstate driver to
    make them use callbacks invoked by the scheduler to trigger CPU
    frequency evaluation instead of using per-CPU deferrable timers
    for that purpose (Rafael Wysocki).
 
  - Reorganization and cleanup of cpufreq governor code to make it
    more straightforward and fix some concurrency problems in it
    (Rafael Wysocki, Viresh Kumar).
 
  - Cleanup and improvements of locking in the cpufreq core (Viresh
    Kumar).
 
  - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
    Kumar, Eric Biggers).
 
  - intel_pstate driver updates including fixes, optimizations and a
    modification to make it enable enable hardware-coordinated P-state
    selection (HWP) by default if supported by the processor (Philippe
    Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
    Franciosi).
 
  - Operating Performance Points (OPP) framework updates to improve
    its handling of voltage regulators and device clocks and updates
    of the cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).
 
  - Updates of the powernv cpufreq driver to fix initialization
    and cleanup problems in it and correct its worker thread handling
    with respect to CPU offline, new powernv_throttle tracepoint
    (Shilpasri Bhat).
 
  - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).
 
  - ACPICA updates including one fix for a regression introduced
    by previos changes in the ACPICA code (Bob Moore, Lv Zheng,
    David Box, Colin Ian King).
 
  - Support for installing ACPI tables from initrd (Lv Zheng).
 
  - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
    Chaugule).
 
  - Support for _HID(ACPI0010) devices (ACPI processor containers)
    and ACPI processor driver cleanups (Sudeep Holla).
 
  - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
    Aleksey Makarov).
 
  - Modification of the ACPI PCI IRQ management code to make it treat
    255 in the Interrupt Line register as "not connected" on x86 (as
    per the specification) and avoid attempts to use that value as
    a valid interrupt vector (Chen Fan).
 
  - ACPI APEI fixes related to resource leaks (Josh Hunt).
 
  - Removal of modularity from a few ACPI drivers (BGRT, GHES,
    intel_pmic_crc) that cannot be built as modules in practice (Paul
    Gortmaker).
 
  - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
    as a valid resource type (Harb Abdulhamid).
 
  - New device ID (future AMD I2C controller) in the ACPI driver for
    AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).
 
  - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).
 
  - cpuidle menu governor optimization to avoid a square root
    computation in it (Rasmus Villemoes).
 
  - Fix for potential use-after-free in the generic device properties
    framework (Heikki Krogerus).
 
  - Updates of the generic power domains (genpd) framework including
    support for multiple power states of a domain, fixes and debugfs
    output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
    Geert Uytterhoeven).
 
  - Intel RAPL power capping driver updates to reduce IPI overhead in
    it (Jacob Pan).
 
  - System suspend/hibernation code cleanups (Eric Biggers, Saurabh
    Sengar).
 
  - Year 2038 fix for the process freezer (Abhilash Jindal).
 
  - turbostat utility updates including new features (decoding of more
    registers and CPUID fields, sub-second intervals support, GFX MHz
    and RC6 printout, --out command line option), fixes (syscall jitter
    detection and workaround, reductioin of the number of syscalls made,
    fixes related to Xeon x200 processors, compiler warning fixes) and
    cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJW50NXAAoJEILEb/54YlRxvr8QAIktC9+ft0y5AmU46hDcBWcK
 QutyWJL9X9BS6DWBJZA2qclDYFmhMfi5Fza1se0gQ9TnLB/KrBwHWLsiYoTsb1k+
 nPKf214aPk+qAhkVuyB4leNWML9Qz9n9jwku/EYxWWpgtbSRf3+0ioIKZeWWc/8V
 JvuaOu4O+g/tkmL7QTrnGWBwhIIssAAV85QPsHkx+g68MrCj4UMMzm7z9G21SPXX
 bmP8yIHsczX/XnRsY0W2NSno7Vdk6ImHpDJ26IAZg28WRNPWICHgGYHvB0TTWMvb
 tts+yqfF7/7QLRjT/M8k9CzDBDE/DnVqoZ0fNJ+aYr7hNKF32mtAN+jH9ZB9dl/P
 fEFapJkPxnWyzAoVoB9Dz0rkcZkYMlbxlLWzUGpaPq0JflUUTzLk0ApSjmMn4HRO
 UddwCDdyHTaYThp3gn6GbOb0pIP0SdOVbI1M2QV2x/4PLcT2Ft8Np1+1RFWOeinZ
 Bdl9AE890big0808mqbBzw/buETwr9FjHtCdDPXpP0vJpkBLu3nIYRNb0LCt39es
 mWMp6dFhGgvGj3D3ahTuV3GI8hdpDkh9SObexa11RCjkTKrXcwEmFxHxLeFXwKYq
 alG278bo6cSChRMziS1lis+W/3tsJRN4TXUSv1PPzJHrFgptQVFRStU9ngBKP+pN
 WB+itPc4Fw0YHOrAFsrx
 =cfty
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the majority of changes go into cpufreq and they are
  significant.

  First off, the way CPU frequency updates are triggered is different
  now.  Instead of having to set up and manage a deferrable timer for
  each CPU in the system to evaluate and possibly change its frequency
  periodically, cpufreq governors set up callbacks to be invoked by the
  scheduler on a regular basis (basically on utilization updates).  The
  "old" governors, "ondemand" and "conservative", still do all of their
  work in process context (although that is triggered by the scheduler
  now), but intel_pstate does it all in the callback invoked by the
  scheduler with no need for any additional asynchronous processing.

  Of course, this eliminates the overhead related to the management of
  all those timers, but also it allows the cpufreq governor code to be
  simplified quite a bit.  On top of that, the common code and data
  structures used by the "ondemand" and "conservative" governors are
  cleaned up and made more straightforward and some long-standing and
  quite annoying problems are addressed.  In particular, the handling of
  governor sysfs attributes is modified and the related locking becomes
  more fine grained which allows some concurrency problems to be avoided
  (particularly deadlocks with the core cpufreq code).

  In principle, the new mechanism for triggering frequency updates
  allows utilization information to be passed from the scheduler to
  cpufreq.  Although the current code doesn't make use of it, in the
  works is a new cpufreq governor that will make decisions based on the
  scheduler's utilization data.  That should allow the scheduler and
  cpufreq to work more closely together in the long run.

  In addition to the core and governor changes, cpufreq drivers are
  updated too.  Fixes and optimizations go into intel_pstate, the
  cpufreq-dt driver is updated on top of some modification in the
  Operating Performance Points (OPP) framework and there are fixes and
  other updates in the powernv cpufreq driver.

  Apart from the cpufreq updates there is some new ACPICA material,
  including a fix for a problem introduced by previous ACPICA updates,
  and some less significant changes in the ACPI code, like CPPC code
  optimizations, ACPI processor driver cleanups and support for loading
  ACPI tables from initrd.

  Also updated are the generic power domains framework, the Intel RAPL
  power capping driver and the turbostat utility and we have a bunch of
  traditional assorted fixes and cleanups.

  Specifics:

   - Redesign of cpufreq governors and the intel_pstate driver to make
     them use callbacks invoked by the scheduler to trigger CPU
     frequency evaluation instead of using per-CPU deferrable timers for
     that purpose (Rafael Wysocki).

   - Reorganization and cleanup of cpufreq governor code to make it more
     straightforward and fix some concurrency problems in it (Rafael
     Wysocki, Viresh Kumar).

   - Cleanup and improvements of locking in the cpufreq core (Viresh
     Kumar).

   - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
     Kumar, Eric Biggers).

   - intel_pstate driver updates including fixes, optimizations and a
     modification to make it enable enable hardware-coordinated P-state
     selection (HWP) by default if supported by the processor (Philippe
     Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
     Franciosi).

   - Operating Performance Points (OPP) framework updates to improve its
     handling of voltage regulators and device clocks and updates of the
     cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).

   - Updates of the powernv cpufreq driver to fix initialization and
     cleanup problems in it and correct its worker thread handling with
     respect to CPU offline, new powernv_throttle tracepoint (Shilpasri
     Bhat).

   - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).

   - ACPICA updates including one fix for a regression introduced by
     previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box,
     Colin Ian King).

   - Support for installing ACPI tables from initrd (Lv Zheng).

   - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
     Chaugule).

   - Support for _HID(ACPI0010) devices (ACPI processor containers) and
     ACPI processor driver cleanups (Sudeep Holla).

   - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
     Aleksey Makarov).

   - Modification of the ACPI PCI IRQ management code to make it treat
     255 in the Interrupt Line register as "not connected" on x86 (as
     per the specification) and avoid attempts to use that value as a
     valid interrupt vector (Chen Fan).

   - ACPI APEI fixes related to resource leaks (Josh Hunt).

   - Removal of modularity from a few ACPI drivers (BGRT, GHES,
     intel_pmic_crc) that cannot be built as modules in practice (Paul
     Gortmaker).

   - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
     as a valid resource type (Harb Abdulhamid).

   - New device ID (future AMD I2C controller) in the ACPI driver for
     AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).

   - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).

   - cpuidle menu governor optimization to avoid a square root
     computation in it (Rasmus Villemoes).

   - Fix for potential use-after-free in the generic device properties
     framework (Heikki Krogerus).

   - Updates of the generic power domains (genpd) framework including
     support for multiple power states of a domain, fixes and debugfs
     output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
     Geert Uytterhoeven).

   - Intel RAPL power capping driver updates to reduce IPI overhead in
     it (Jacob Pan).

   - System suspend/hibernation code cleanups (Eric Biggers, Saurabh
     Sengar).

   - Year 2038 fix for the process freezer (Abhilash Jindal).

   - turbostat utility updates including new features (decoding of more
     registers and CPUID fields, sub-second intervals support, GFX MHz
     and RC6 printout, --out command line option), fixes (syscall jitter
     detection and workaround, reductioin of the number of syscalls
     made, fixes related to Xeon x200 processors, compiler warning
     fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)"

* tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits)
  tools/power turbostat: bugfix: TDP MSRs print bits fixing
  tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
  tools/power turbostat: call __cpuid() instead of __get_cpuid()
  tools/power turbostat: indicate SMX and SGX support
  tools/power turbostat: detect and work around syscall jitter
  tools/power turbostat: show GFX%rc6
  tools/power turbostat: show GFXMHz
  tools/power turbostat: show IRQs per CPU
  tools/power turbostat: make fewer systems calls
  tools/power turbostat: fix compiler warnings
  tools/power turbostat: add --out option for saving output in a file
  tools/power turbostat: re-name "%Busy" field to "Busy%"
  tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
  tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
  tools/power turbostat: allow sub-sec intervals
  ACPI / APEI: ERST: Fixed leaked resources in erst_init
  ACPI / APEI: Fix leaked resources
  intel_pstate: Do not skip samples partially
  intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
  intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
  ...
2016-03-16 14:10:53 -07:00
Laura Abbott 1414c7f4f7 mm/page_poisoning.c: allow for zero poisoning
By default, page poisoning uses a poison value (0xaa) on free.  If this
is changed to 0, the page is not only sanitized but zeroing on alloc
with __GFP_ZERO can be skipped as well.  The tradeoff is that detecting
corruption from the poisoning is harder to detect.  This feature also
cannot be used with hibernation since pages are not guaranteed to be
zeroed after hibernation.

Credit to Grsecurity/PaX team for inspiring this work

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
saurabh 22e09b333f PM / suspend: replacing printk
replacing printk(s) with appropriate pr_info and pr_err
in order to fix checkpatch.pl warnings

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-11 11:12:55 +01:00
Abhilash Jindal f7b382b988 PM/freezer: y2038, use boottime to compare tstamps
Wall time obtained from do_gettimeofday gives 32 bit timeval which can only
represent time until January 2038. This patch moves to ktime_t, a 64-bit time.

Also, wall time is susceptible to sudden jumps due to user setting the time or
due to NTP.  Boot time is constantly increasing time better suited for
subtracting two timestamps.

Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-11 11:10:43 +01:00
Arnd Bergmann 993e9fe1e7 PM: APM_EMULATION does not depend on PM
The APM emulation code does multiple things, and some of them depend on
PM_SLEEP, while the battery management does not. However, selecting
the symbol like SHARPSL_PM does causes a Kconfig warning:

warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION)

From all I can tell, this is completely harmless, and we can simply allow
APM_EMULATION to be enabled here, even if PM is not.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27 23:20:14 +01:00
Rafael J. Wysocki a1e9ca6967 PM / sleep: Add support for read-only sysfs attributes
Some sysfs attributes in /sys/power/ should really be read-only,
so add support for that, convert those attributes to read-only
and drop the stub .show() routines from them.

Original-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-04 22:28:59 +01:00
Mel Gorman 71baba4b92 mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM
__GFP_WAIT was used to signal that the caller was in atomic context and
could not sleep.  Now it is possible to distinguish between true atomic
context and callers that are not willing to sleep.  The latter should
clear __GFP_DIRECT_RECLAIM so kswapd will still wake.  As clearing
__GFP_WAIT behaves differently, there is a risk that people will clear the
wrong flags.  This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly
indicate what it does -- setting it allows all reclaim activity, clearing
them prevents it.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Mel Gorman d0164adc89 mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Geliang Tang d439e64f22 PM / hibernate: fix a comment typo
Just fix a typo in a function name in kerneldoc comments.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14 02:37:17 +02:00
Rafael J. Wysocki ef25ba0476 PM / sleep: Add flags to indicate platform firmware involvement
There are quite a few cases in which device drivers, bus types or
even the PM core itself may benefit from knowing whether or not
the platform firmware will be involved in the upcoming system power
transition (during system suspend) or whether or not it was involved
in it (during system resume).

For this reason, introduce global system suspend flags that can be
used by the platform code to expose that information for the benefit
of the other parts of the kernel and make the ACPI core set them
as appropriate.

Users of the new flags will be added later.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14 02:17:33 +02:00
Alexandra Yates a6f5f0dd4e PM / sleep: Report interrupt that caused system wakeup
Add a sysfs attribute, /sys/power/pm_wakeup_irq, reporting the IRQ
number of the first wakeup interrupt (that is, the first interrupt
from an IRQ line armed for system wakeup) seen by the kernel during
the most recent system suspend/resume cycle.

This feature will be useful for system wakeup diagnostics of
spurious wakeup interrupts.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
[ rjw: Fixed up pm_wakeup_irq definition ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-16 14:20:41 +02:00
Linus Torvalds 1081230b74 Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "This first core part of the block IO changes contains:

   - Cleanup of the bio IO error signaling from Christoph.  We used to
     rely on the uptodate bit and passing around of an error, now we
     store the error in the bio itself.

   - Improvement of the above from myself, by shrinking the bio size
     down again to fit in two cachelines on x86-64.

   - Revert of the max_hw_sectors cap removal from a revision again,
     from Jeff Moyer.  This caused performance regressions in various
     tests.  Reinstate the limit, bump it to a more reasonable size
     instead.

   - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
     Most devices have huge trim limits, which can cause nasty latencies
     when deleting files.  Enable the admin to configure the size down.
     We will look into having a more sane default instead of UINT_MAX
     sectors.

   - Improvement of the SGP gaps logic from Keith Busch.

   - Enable the block core to handle arbitrarily sized bios, which
     enables a nice simplification of bio_add_page() (which is an IO hot
     path).  From Kent.

   - Improvements to the partition io stats accounting, making it
     faster.  From Ming Lei.

   - Also from Ming Lei, a basic fixup for overflow of the sysfs pending
     file in blk-mq, as well as a fix for a blk-mq timeout race
     condition.

   - Ming Lin has been carrying Kents above mentioned patches forward
     for a while, and testing them.  Ming also did a few fixes around
     that.

   - Sasha Levin found and fixed a use-after-free problem introduced by
     the bio->bi_error changes from Christoph.

   - Small blk cgroup cleanup from Viresh Kumar"

* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
  blk: Fix bio_io_vec index when checking bvec gaps
  block: Replace SG_GAPS with new queue limits mask
  block: bump BLK_DEF_MAX_SECTORS to 2560
  Revert "block: remove artifical max_hw_sectors cap"
  blk-mq: fix race between timeout and freeing request
  blk-mq: fix buffer overflow when reading sysfs file of 'pending'
  Documentation: update notes in biovecs about arbitrarily sized bios
  block: remove bio_get_nr_vecs()
  fs: use helper bio_add_page() instead of open coding on bi_io_vec
  block: kill merge_bvec_fn() completely
  md/raid5: get rid of bio_fits_rdev()
  md/raid5: split bio for chunk_aligned_read
  block: remove split code in blkdev_issue_{discard,write_same}
  btrfs: remove bio splitting and merge_bvec_fn() calls
  bcache: remove driver private bio splitting code
  block: simplify bio_add_page()
  block: make generic_make_request handle arbitrarily sized bios
  blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
  block: don't access bio->bi_error after bio_put()
  block: shrink struct bio down to 2 cache lines again
  ...
2015-09-02 13:10:25 -07:00
Len Brown 2fd77fff4b PM / suspend: make sync() on suspend-to-RAM build-time optional
The Linux kernel suspend path has traditionally invoked sys_sync()
before freezing user threads.

But sys_sync() can be expensive, and some user-space OS's do not want
the kernel to pay the cost of sys_sync() on every suspend -- preferring
invoke sync() from user-space if/when they want it.

So make sys_sync on suspend build-time optional.

The default is unchanged.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-31 23:46:05 +02:00
Christoph Hellwig 4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
SungEun Kim 6ce12a977b PM / autosleep: Use workqueue for user space wakeup sources garbage collector
The synchronous synchronize_rcu() in wakeup_source_remove() makes
user process which writes to /sys/kernel/wake_unlock blocked sometimes.

For example, when android eventhub tries to release a wakelock, this
blocking process can occur, and eventhub can't get input events
for a while.

Using a work item instead of direct function call at pm_wake_unlock()
can prevent this unnecessary delay from happening.

Signed-off-by: SungEun Kim <cleaneye.kim@lge.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-14 21:04:48 +02:00
Linus Torvalds 5c3950970b Power management and ACPI fixes for v4.2-rc1
- Fix a recently added memory leak in an error path in the ACPI
    resources management code (Dan Carpenter).
 
  - Fix a build warning triggered by an ACPI video header function
    that should be static inline (Borislav Petkov).
 
  - Change names of helper function converting struct fwnode_handle
    pointers to either struct device_node or struct acpi_device
    pointers so they don't conflict with local variable names
    (Alexander Sverdlin).
 
  - Make the hibernate core re-enable nonboot CPUs on failures to
    disable them as expected (Vitaly Kuznetsov).
 
  - Increase the default timeout of the device suspend watchdog to
    prevent it from triggering too early on some systems (Takashi Iwai).
 
  - Prevent the cpuidle powernv driver from registering idle
    states with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT
    is unset which leads to boot hangs (Preeti U Murthy).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVksL4AAoJEILEb/54YlRxY9cP/jnXE12Jv2aYQAram5Fd7nY7
 LSiuKAzVCqJbdBa3sRILKjMwgxciYABXypw6Zapa8TimAV374GZh6W4VXgIAifDf
 gdicSSxB4A5cViUEte3uebzdaM2QMcOcQ6A+UOe849q3emfbu91f0LXTWwahR0og
 Hjs7QCcvZS/swQIIY0JaIivC5mRwxrx141oPVn4GNf0tnOzH7eOUktYCZwh4U4Qo
 FwUn66XI+ttlrRxs/IV5QSQ9S5qDBHOKdv6MgmGwMzUXINTL4w2Zawg+Pw0m3Puf
 2VnT9jsz4anD1jZMJGLpeKNAjFJZ6ODiv06HjYhscaUZuMSECUiE9f6auUkiSU1F
 r463ujaIcCW5MWUGjRBq5GwP15IuIL/NxjWAVyyMxeYcjOKrpQeEJ2liWnXPv/Bh
 JVOoktFvFu1iOojlWfwnaC83bjZiJIJ6BFEywIm7l0wD1VAmk8IFepMqIrTp4U9R
 ptKD8Go9GripftHryqSQA5wgp64hIQKxSHi+fEM6RfcLskXVKxEYSButva3wnFHx
 2lQSxro42jsaP8O9T1wmb+br0h3efPeo9qyewmjld+vISeUhmsCILta55VtXI0wu
 ektWoAuaA97d+u+mTee4U2kONXo+yUuXe0YqlCb3x/7m8oMg6hoblWZPnWFSeqeH
 T/vI5cRS+a3NqAjctwmX
 =vkde
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes that didn't make it to the previous PM+ACPI pull
  request or are fixing issues introduced by it.

  Specifics:

   - Fix a recently added memory leak in an error path in the ACPI
     resources management code (Dan Carpenter)

   - Fix a build warning triggered by an ACPI video header function that
     should be static inline (Borislav Petkov)

   - Change names of helper function converting struct fwnode_handle
     pointers to either struct device_node or struct acpi_device
     pointers so they don't conflict with local variable names
     (Alexander Sverdlin)

   - Make the hibernate core re-enable nonboot CPUs on failures to
     disable them as expected (Vitaly Kuznetsov)

   - Increase the default timeout of the device suspend watchdog to
     prevent it from triggering too early on some systems (Takashi Iwai)

   - Prevent the cpuidle powernv driver from registering idle states
     with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT is unset
     which leads to boot hangs (Preeti U Murthy)"

* tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
  PM / sleep: Increase default DPM watchdog timeout to 60
  PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure
  ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()
  ACPI / video: Inline acpi_video_set_dmi_backlight_type
  ACPI / resources: free memory on error in add_region_before()
2015-07-01 14:17:44 -07:00
Linus Torvalds bfffa1cc9d Merge branch 'for-4.2/core' of git://git.kernel.dk/linux-block
Pull core block IO update from Jens Axboe:
 "Nothing really major in here, mostly a collection of smaller
  optimizations and cleanups, mixed with various fixes.  In more detail,
  this contains:

   - Addition of policy specific data to blkcg for block cgroups.  From
     Arianna Avanzini.

   - Various cleanups around command types from Christoph.

   - Cleanup of the suspend block I/O path from Christoph.

   - Plugging updates from Shaohua and Jeff Moyer, for blk-mq.

   - Eliminating atomic inc/dec of both remaining IO count and reference
     count in a bio.  From me.

   - Fixes for SG gap and chunk size support for data-less (discards)
     IO, so we can merge these better.  From me.

   - Small restructuring of blk-mq shared tag support, freeing drivers
     from iterating hardware queues.  From Keith Busch.

   - A few cfq-iosched tweaks, from Tahsin Erdogan and me.  Makes the
     IOPS mode the default for non-rotational storage"

* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
  cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
  cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
  cfq-iosched: move group scheduling functions under ifdef
  cfq-iosched: fix the setting of IOPS mode on SSDs
  blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
  block, cgroup: implement policy-specific per-blkcg data
  block: Make CFQ default to IOPS mode on SSDs
  block: add blk_set_queue_dying() to blkdev.h
  blk-mq: Shared tag enhancements
  block: don't honor chunk sizes for data-less IO
  block: only honor SG gap prevention for merges that contain data
  block: fix returnvar.cocci warnings
  block, dm: don't copy bios for request clones
  block: remove management of bi_remaining when restoring original bi_end_io
  block: replace trylock with mutex_lock in blkdev_reread_part()
  block: export blkdev_reread_part() and __blkdev_reread_part()
  suspend: simplify block I/O handling
  block: collapse bio bit space
  block: remove unused BIO_RW_BLOCK and BIO_EOF flags
  block: remove BIO_EOPNOTSUPP
  ...
2015-06-25 14:29:53 -07:00
Takashi Iwai fff3b16d27 PM / sleep: Increase default DPM watchdog timeout to 60
Many harddisks (mostly WD ones) have firmware problems and take too
long, more than 10 seconds, to resume from suspend.  And this often
exceeds the default DPM watchdog timeout (12 seconds), resulting in a
kernel panic out of sudden.

Since most distros just take the default as is, we should give a bit
more safer value.  This patch increases the default value from 12
seconds to one minute, which has been confirmed to be long enough for
such problematic disks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921
Fixes: 70fea60d88 (PM / Sleep: Detect device suspend/resume lockup and log event)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-25 00:35:16 +02:00
Vitaly Kuznetsov 8c506608c3 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure
When disable_nonboot_cpus() fails on some cpu it doesn't bring back all
cpus it managed to offline, a consequent call to enable_nonboot_cpus() is
expected. In hibernation_platform_enter() we don't call
enable_nonboot_cpus() on error so cpus stay offlined.

create_image() and resume_target_kernel() functions handle
disable_nonboot_cpus() faults correctly, hibernation_platform_enter()
is the only one which is doing it wrong.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-24 23:48:44 +02:00
Christoph Hellwig 343df3c79c suspend: simplify block I/O handling
Stop abusing struct page functionality and the swap end_io handler, and
instead add a modified version of the blk-lib.c bio_batch helpers.

Also move the block I/O code into swap.c as they are directly tied into
each other.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Ming Lin <mlin@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-19 09:19:59 -06:00
Ruchi Kandoi 671767360d PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection
If a wakeup source is found to be pending in the last stage of
suspend after syscore suspend, then the machine won't suspend, but
suspend_enter() will return 0.  That is confusing, as wakeup detection
elsewhere causes -EBUSY to be returned from suspend_enter().

To avoid the confusion, make suspend_enter() return -EBUSY in that
case too.

Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-19 02:26:56 +02:00
Rafael J. Wysocki 819b1bb30d PM / sleep: Fix symbol name in a comment in kernel/power/main.c
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-13 15:31:12 +02:00