Commit Graph

72 Commits

Author SHA1 Message Date
Seth Forshee d07b846f62 fs: Limit file caps to the user namespace of the super block
Capability sets attached to files must be ignored except in the
user namespaces where the mounter is privileged, i.e. s_user_ns
and its descendants. Otherwise a vector exists for gaining
privileges in namespaces where a user is not already privileged.

Add a new helper function, current_in_user_ns(), to test whether a user
namespace is the same as or a descendant of another namespace.
Use this helper to determine whether a file's capability set
should be applied to the caps constructed during exec.

--EWB Replaced in_userns with the simpler current_in_userns.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-06-24 10:40:31 -05:00
Al Viro 70f6cbb6f9 kernel/*: switch to memdup_user_nul()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:27:55 -05:00
Andy Lutomirski 58319057b7 capabilities: ambient capabilities
Credit where credit is due: this idea comes from Christoph Lameter with
a lot of valuable input from Serge Hallyn.  This patch is heavily based
on Christoph's patch.

===== The status quo =====

On Linux, there are a number of capabilities defined by the kernel.  To
perform various privileged tasks, processes can wield capabilities that
they hold.

Each task has four capability masks: effective (pE), permitted (pP),
inheritable (pI), and a bounding set (X).  When the kernel checks for a
capability, it checks pE.  The other capability masks serve to modify
what capabilities can be in pE.

Any task can remove capabilities from pE, pP, or pI at any time.  If a
task has a capability in pP, it can add that capability to pE and/or pI.
If a task has CAP_SETPCAP, then it can add any capability to pI, and it
can remove capabilities from X.

Tasks are not the only things that can have capabilities; files can also
have capabilities.  A file can have no capabilty information at all [1].
If a file has capability information, then it has a permitted mask (fP)
and an inheritable mask (fI) as well as a single effective bit (fE) [2].
File capabilities modify the capabilities of tasks that execve(2) them.

A task that successfully calls execve has its capabilities modified for
the file ultimately being excecuted (i.e.  the binary itself if that
binary is ELF or for the interpreter if the binary is a script.) [3] In
the capability evolution rules, for each mask Z, pZ represents the old
value and pZ' represents the new value.  The rules are:

  pP' = (X & fP) | (pI & fI)
  pI' = pI
  pE' = (fE ? pP' : 0)
  X is unchanged

For setuid binaries, fP, fI, and fE are modified by a moderately
complicated set of rules that emulate POSIX behavior.  Similarly, if
euid == 0 or ruid == 0, then fP, fI, and fE are modified differently
(primary, fP and fI usually end up being the full set).  For nonroot
users executing binaries with neither setuid nor file caps, fI and fP
are empty and fE is false.

As an extra complication, if you execute a process as nonroot and fE is
set, then the "secure exec" rules are in effect: AT_SECURE gets set,
LD_PRELOAD doesn't work, etc.

This is rather messy.  We've learned that making any changes is
dangerous, though: if a new kernel version allows an unprivileged
program to change its security state in a way that persists cross
execution of a setuid program or a program with file caps, this
persistent state is surprisingly likely to allow setuid or file-capped
programs to be exploited for privilege escalation.

===== The problem =====

Capability inheritance is basically useless.

If you aren't root and you execute an ordinary binary, fI is zero, so
your capabilities have no effect whatsoever on pP'.  This means that you
can't usefully execute a helper process or a shell command with elevated
capabilities if you aren't root.

On current kernels, you can sort of work around this by setting fI to
the full set for most or all non-setuid executable files.  This causes
pP' = pI for nonroot, and inheritance works.  No one does this because
it's a PITA and it isn't even supported on most filesystems.

If you try this, you'll discover that every nonroot program ends up with
secure exec rules, breaking many things.

This is a problem that has bitten many people who have tried to use
capabilities for anything useful.

===== The proposed change =====

This patch adds a fifth capability mask called the ambient mask (pA).
pA does what most people expect pI to do.

pA obeys the invariant that no bit can ever be set in pA if it is not
set in both pP and pI.  Dropping a bit from pP or pI drops that bit from
pA.  This ensures that existing programs that try to drop capabilities
still do so, with a complication.  Because capability inheritance is so
broken, setting KEEPCAPS, using setresuid to switch to nonroot uids, and
then calling execve effectively drops capabilities.  Therefore,
setresuid from root to nonroot conditionally clears pA unless
SECBIT_NO_SETUID_FIXUP is set.  Processes that don't like this can
re-add bits to pA afterwards.

The capability evolution rules are changed:

  pA' = (file caps or setuid or setgid ? 0 : pA)
  pP' = (X & fP) | (pI & fI) | pA'
  pI' = pI
  pE' = (fE ? pP' : pA')
  X is unchanged

If you are nonroot but you have a capability, you can add it to pA.  If
you do so, your children get that capability in pA, pP, and pE.  For
example, you can set pA = CAP_NET_BIND_SERVICE, and your children can
automatically bind low-numbered ports.  Hallelujah!

Unprivileged users can create user namespaces, map themselves to a
nonzero uid, and create both privileged (relative to their namespace)
and unprivileged process trees.  This is currently more or less
impossible.  Hallelujah!

You cannot use pA to try to subvert a setuid, setgid, or file-capped
program: if you execute any such program, pA gets cleared and the
resulting evolution rules are unchanged by this patch.

Users with nonzero pA are unlikely to unintentionally leak that
capability.  If they run programs that try to drop privileges, dropping
privileges will still work.

It's worth noting that the degree of paranoia in this patch could
possibly be reduced without causing serious problems.  Specifically, if
we allowed pA to persist across executing non-pA-aware setuid binaries
and across setresuid, then, naively, the only capabilities that could
leak as a result would be the capabilities in pA, and any attacker
*already* has those capabilities.  This would make me nervous, though --
setuid binaries that tried to privilege-separate might fail to do so,
and putting CAP_DAC_READ_SEARCH or CAP_DAC_OVERRIDE into pA could have
unexpected side effects.  (Whether these unexpected side effects would
be exploitable is an open question.) I've therefore taken the more
paranoid route.  We can revisit this later.

An alternative would be to require PR_SET_NO_NEW_PRIVS before setting
ambient capabilities.  I think that this would be annoying and would
make granting otherwise unprivileged users minor ambient capabilities
(CAP_NET_BIND_SERVICE or CAP_NET_RAW for example) much less useful than
it is with this patch.

===== Footnotes =====

[1] Files that are missing the "security.capability" xattr or that have
unrecognized values for that xattr end up with has_cap set to false.
The code that does that appears to be complicated for no good reason.

[2] The libcap capability mask parsers and formatters are dangerously
misleading and the documentation is flat-out wrong.  fE is *not* a mask;
it's a single bit.  This has probably confused every single person who
has tried to use file capabilities.

[3] Linux very confusingly processes both the script and the interpreter
if applicable, for reasons that elude me.  The results from thinking
about a script's file capabilities and/or setuid bits are mostly
discarded.

Preliminary userspace code is here, but it needs updating:
https://git.kernel.org/cgit/linux/kernel/git/luto/util-linux-playground.git/commit/?h=cap_ambient&id=7f5afbd175d2

Here is a test program that can be used to verify the functionality
(from Christoph):

/*
 * Test program for the ambient capabilities. This program spawns a shell
 * that allows running processes with a defined set of capabilities.
 *
 * (C) 2015 Christoph Lameter <cl@linux.com>
 * Released under: GPL v3 or later.
 *
 *
 * Compile using:
 *
 *	gcc -o ambient_test ambient_test.o -lcap-ng
 *
 * This program must have the following capabilities to run properly:
 * Permissions for CAP_NET_RAW, CAP_NET_ADMIN, CAP_SYS_NICE
 *
 * A command to equip the binary with the right caps is:
 *
 *	setcap cap_net_raw,cap_net_admin,cap_sys_nice+p ambient_test
 *
 *
 * To get a shell with additional caps that can be inherited by other processes:
 *
 *	./ambient_test /bin/bash
 *
 *
 * Verifying that it works:
 *
 * From the bash spawed by ambient_test run
 *
 *	cat /proc/$$/status
 *
 * and have a look at the capabilities.
 */

#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <cap-ng.h>
#include <sys/prctl.h>
#include <linux/capability.h>

/*
 * Definitions from the kernel header files. These are going to be removed
 * when the /usr/include files have these defined.
 */
#define PR_CAP_AMBIENT 47
#define PR_CAP_AMBIENT_IS_SET 1
#define PR_CAP_AMBIENT_RAISE 2
#define PR_CAP_AMBIENT_LOWER 3
#define PR_CAP_AMBIENT_CLEAR_ALL 4

static void set_ambient_cap(int cap)
{
	int rc;

	capng_get_caps_process();
	rc = capng_update(CAPNG_ADD, CAPNG_INHERITABLE, cap);
	if (rc) {
		printf("Cannot add inheritable cap\n");
		exit(2);
	}
	capng_apply(CAPNG_SELECT_CAPS);

	/* Note the two 0s at the end. Kernel checks for these */
	if (prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_RAISE, cap, 0, 0)) {
		perror("Cannot set cap");
		exit(1);
	}
}

int main(int argc, char **argv)
{
	int rc;

	set_ambient_cap(CAP_NET_RAW);
	set_ambient_cap(CAP_NET_ADMIN);
	set_ambient_cap(CAP_SYS_NICE);

	printf("Ambient_test forking shell\n");
	if (execv(argv[1], argv + 1))
		perror("Cannot exec");

	return 0;
}

Signed-off-by: Christoph Lameter <cl@linux.com> # Original author
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Aaron Jones <aaronmdjones@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew G. Morgan <morgan@kernel.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: Markku Savela <msa@moth.iki.fi>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 16:54:41 -07:00
Eric W. Biederman faf00da544 userns,pidns: Force thread group sharing, not signal handler sharing.
The code that places signals in signal queues computes the uids, gids,
and pids at the time the signals are enqueued.  Which means that tasks
that share signal queues must be in the same pid and user namespaces.

Sharing signal handlers is fine, but bizarre.

So make the code in fork and userns_install clearer by only testing
for what is functionally necessary.

Also update the comment in unshare about unsharing a user namespace to
be a little more explicit and make a little more sense.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-08-12 14:55:28 -05:00
Linus Torvalds 87c31b39ab Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace related fixes from Eric Biederman:
 "As these are bug fixes almost all of thes changes are marked for
  backporting to stable.

  The first change (implicitly adding MNT_NODEV on remount) addresses a
  regression that was created when security issues with unprivileged
  remount were closed.  I go on to update the remount test to make it
  easy to detect if this issue reoccurs.

  Then there are a handful of mount and umount related fixes.

  Then half of the changes deal with the a recently discovered design
  bug in the permission checks of gid_map.  Unix since the beginning has
  allowed setting group permissions on files to less than the user and
  other permissions (aka ---rwx---rwx).  As the unix permission checks
  stop as soon as a group matches, and setgroups allows setting groups
  that can not later be dropped, results in a situtation where it is
  possible to legitimately use a group to assign fewer privileges to a
  process.  Which means dropping a group can increase a processes
  privileges.

  The fix I have adopted is that gid_map is now no longer writable
  without privilege unless the new file /proc/self/setgroups has been
  set to permanently disable setgroups.

  The bulk of user namespace using applications even the applications
  using applications using user namespaces without privilege remain
  unaffected by this change.  Unfortunately this ix breaks a couple user
  space applications, that were relying on the problematic behavior (one
  of which was tools/selftests/mount/unprivileged-remount-test.c).

  To hopefully prevent needing a regression fix on top of my security
  fix I rounded folks who work with the container implementations mostly
  like to be affected and encouraged them to test the changes.

    > So far nothing broke on my libvirt-lxc test bed. :-)
    > Tested with openSUSE 13.2 and libvirt 1.2.9.
    > Tested-by: Richard Weinberger <richard@nod.at>

    > Tested on Fedora20 with libvirt 1.2.11, works fine.
    > Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>

    > Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
    > Just to be sure I was testing the right thing I also tested using
    > my unprivileged nsexec testcases, and they failed on setgroup/setgid
    > as now expected, and succeeded there without your patches.
    > Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>

    > I tested this with Sandstorm.  It breaks as is and it works if I add
    > the setgroups thing.
    > Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns: Unbreak the unprivileged remount tests
  userns; Correct the comment in map_write
  userns: Allow setting gid_maps without privilege when setgroups is disabled
  userns: Add a knob to disable setgroups on a per user namespace basis
  userns: Rename id_map_mutex to userns_state_mutex
  userns: Only allow the creator of the userns unprivileged mappings
  userns: Check euid no fsuid when establishing an unprivileged uid mapping
  userns: Don't allow unprivileged creation of gid mappings
  userns: Don't allow setgroups until a gid mapping has been setablished
  userns: Document what the invariant required for safe unprivileged mappings.
  groups: Consolidate the setgroups permission checks
  mnt: Clear mnt_expire during pivot_root
  mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
  mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
  umount: Do not allow unmounting rootfs.
  umount: Disallow unprivileged mount force
  mnt: Update unprivileged remount test
  mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
2014-12-17 12:31:40 -08:00
Eric W. Biederman 36476beac4 userns; Correct the comment in map_write
It is important that all maps are less than PAGE_SIZE
or else setting the last byte of the buffer to '0'
could write off the end of the allocated storage.

Correct the misleading comment.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-11 18:07:06 -06:00
Eric W. Biederman 66d2f338ee userns: Allow setting gid_maps without privilege when setgroups is disabled
Now that setgroups can be disabled and not reenabled, setting gid_map
without privielge can now be enabled when setgroups is disabled.

This restores most of the functionality that was lost when unprivileged
setting of gid_map was removed.  Applications that use this functionality
will need to check to see if they use setgroups or init_groups, and if they
don't they can be fixed by simply disabling setgroups before writing to
gid_map.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-11 18:07:06 -06:00
Eric W. Biederman 9cc46516dd userns: Add a knob to disable setgroups on a per user namespace basis
- Expose the knob to user space through a proc file /proc/<pid>/setgroups

  A value of "deny" means the setgroups system call is disabled in the
  current processes user namespace and can not be enabled in the
  future in this user namespace.

  A value of "allow" means the segtoups system call is enabled.

- Descendant user namespaces inherit the value of setgroups from
  their parents.

- A proc file is used (instead of a sysctl) as sysctls currently do
  not allow checking the permissions at open time.

- Writing to the proc file is restricted to before the gid_map
  for the user namespace is set.

  This ensures that disabling setgroups at a user namespace
  level will never remove the ability to call setgroups
  from a process that already has that ability.

  A process may opt in to the setgroups disable for itself by
  creating, entering and configuring a user namespace or by calling
  setns on an existing user namespace with setgroups disabled.
  Processes without privileges already can not call setgroups so this
  is a noop.  Prodcess with privilege become processes without
  privilege when entering a user namespace and as with any other path
  to dropping privilege they would not have the ability to call
  setgroups.  So this remains within the bounds of what is possible
  without a knob to disable setgroups permanently in a user namespace.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-11 18:06:36 -06:00
Eric W. Biederman f0d62aec93 userns: Rename id_map_mutex to userns_state_mutex
Generalize id_map_mutex so it can be used for more state of a user namespace.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-09 17:08:33 -06:00
Eric W. Biederman f95d7918bd userns: Only allow the creator of the userns unprivileged mappings
If you did not create the user namespace and are allowed
to write to uid_map or gid_map you should already have the necessary
privilege in the parent user namespace to establish any mapping
you want so this will not affect userspace in practice.

Limiting unprivileged uid mapping establishment to the creator of the
user namespace makes it easier to verify all credentials obtained with
the uid mapping can be obtained without the uid mapping without
privilege.

Limiting unprivileged gid mapping establishment (which is temporarily
absent) to the creator of the user namespace also ensures that the
combination of uid and gid can already be obtained without privilege.

This is part of the fix for CVE-2014-8989.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-09 17:08:32 -06:00
Eric W. Biederman 80dd00a237 userns: Check euid no fsuid when establishing an unprivileged uid mapping
setresuid allows the euid to be set to any of uid, euid, suid, and
fsuid.  Therefor it is safe to allow an unprivileged user to map
their euid and use CAP_SETUID privileged with exactly that uid,
as no new credentials can be obtained.

I can not find a combination of existing system calls that allows setting
uid, euid, suid, and fsuid from the fsuid making the previous use
of fsuid for allowing unprivileged mappings a bug.

This is part of a fix for CVE-2014-8989.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-09 17:08:32 -06:00
Eric W. Biederman be7c6dba23 userns: Don't allow unprivileged creation of gid mappings
As any gid mapping will allow and must allow for backwards
compatibility dropping groups don't allow any gid mappings to be
established without CAP_SETGID in the parent user namespace.

For a small class of applications this change breaks userspace
and removes useful functionality.  This small class of applications
includes tools/testing/selftests/mount/unprivilged-remount-test.c

Most of the removed functionality will be added back with the addition
of a one way knob to disable setgroups.  Once setgroups is disabled
setting the gid_map becomes as safe as setting the uid_map.

For more common applications that set the uid_map and the gid_map
with privilege this change will have no affect.

This is part of a fix for CVE-2014-8989.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-09 17:08:24 -06:00
Eric W. Biederman 273d2c67c3 userns: Don't allow setgroups until a gid mapping has been setablished
setgroups is unique in not needing a valid mapping before it can be called,
in the case of setgroups(0, NULL) which drops all supplemental groups.

The design of the user namespace assumes that CAP_SETGID can not actually
be used until a gid mapping is established.  Therefore add a helper function
to see if the user namespace gid mapping has been established and call
that function in the setgroups permission check.

This is part of the fix for CVE-2014-8989, being able to drop groups
without privilege using user namespaces.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-09 16:58:40 -06:00
Eric W. Biederman 0542f17bf2 userns: Document what the invariant required for safe unprivileged mappings.
The rule is simple.  Don't allow anything that wouldn't be allowed
without unprivileged mappings.

It was previously overlooked that establishing gid mappings would
allow dropping groups and potentially gaining permission to files and
directories that had lesser permissions for a specific group than for
all other users.

This is the rule needed to fix CVE-2014-8989 and prevent any other
security issues with new_idmap_permitted.

The reason for this rule is that the unix permission model is old and
there are programs out there somewhere that take advantage of every
little corner of it.  So allowing a uid or gid mapping to be
established without privielge that would allow anything that would not
be allowed without that mapping will result in expectations from some
code somewhere being violated.  Violated expectations about the
behavior of the OS is a long way to say a security issue.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-05 19:07:26 -06:00
Al Viro 33c429405a copy address of proc_ns_ops into ns_common
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:47 -05:00
Al Viro 6344c433a4 new helpers: ns_alloc_inum/ns_free_inum
take struct ns_common *, for now simply wrappers around proc_{alloc,free}_inum()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:36 -05:00
Al Viro 64964528b2 make proc_ns_operations work with struct ns_common * instead of void *
We can do that now.  And kill ->inum(), while we are at it - all instances
are identical.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:17 -05:00
Al Viro 3c04118461 switch the rest of proc_ns_operations to working with &...->ns
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:11 -05:00
Al Viro 435d5f4bb2 common object embedded into various struct ....ns
for now - just move corresponding ->proc_inum instances over there

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:31:00 -05:00
Fabian Frederick ccf94f1b4a proc: constify seq_operations
proc_uid_seq_operations, proc_gid_seq_operations and
proc_projid_seq_operations are only called in proc_id_map_open with
seq_open as const struct seq_operations so we can constify the 3
structures and update proc_id_map_open prototype.

   text    data     bss     dec     hex filename
   6817     404    1984    9205    23f5 kernel/user_namespace.o-before
   6913     308    1984    9205    23f5 kernel/user_namespace.o-after

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:22 -07:00
Fabian Frederick 68a9a435e4 kernel/user_namespace.c: kernel-doc/checkpatch fixes
-uid->gid
-split some function declarations
-if/then/else warning

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Mikulas Patocka e79323bd87 user namespace: fix incorrect memory barriers
smp_read_barrier_depends() can be used if there is data dependency between
the readers - i.e. if the read operation after the barrier uses address
that was obtained from the read operation before the barrier.

In this file, there is only control dependency, no data dependecy, so the
use of smp_read_barrier_depends() is incorrect. The code could fail in the
following way:
* the cpu predicts that idx < entries is true and starts executing the
  body of the for loop
* the cpu fetches map->extent[0].first and map->extent[0].count
* the cpu fetches map->nr_extents
* the cpu verifies that idx < extents is true, so it commits the
  instructions in the body of the for loop

The problem is that in this scenario, the cpu read map->extent[0].first
and map->nr_extents in the wrong order. We need a full read memory barrier
to prevent it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-14 16:03:02 -07:00
Paul Gortmaker c96d6660dc kernel: audit/fix non-modular users of module_init in core code
Code that is obj-y (always built-in) or dependent on a bool Kconfig
(built-in or absent) can never be modular.  So using module_init as an
alias for __initcall can be somewhat misleading.

Fix these up now, so that we can relocate module_init from init.h into
module.h in the future.  If we don't do this, we'd have to add module.h
to obviously non-modular code, and that would be a worse thing.

The audit targets the following module_init users for change:
 kernel/user.c                  obj-y
 kernel/kexec.c                 bool KEXEC (one instance per arch)
 kernel/profile.c               bool PROFILING
 kernel/hung_task.c             bool DETECT_HUNG_TASK
 kernel/sched/stats.c           bool SCHEDSTATS
 kernel/user_namespace.c        bool USER_NS

Note that direct use of __initcall is discouraged, vs.  one of the
priority categorized subgroups.  As __initcall gets mapped onto
device_initcall, our use of subsys_initcall (which makes sense for these
files) will thus change this registration from level 6-device to level
4-subsys (i.e.  slightly earlier).  However no observable impact of that
difference has been observed during testing.

Also, two instances of missing ";" at EOL are fixed in kexec.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:07 -07:00
Brian Campbell b080e047a6 user_namespace.c: Remove duplicated word in comment
Signed-off-by: Brian Campbell <brian.campbell@editshare.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-20 11:58:35 -08:00
David Howells f36f8c75ae KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
Add support for per-user_namespace registers of persistent per-UID kerberos
caches held within the kernel.

This allows the kerberos cache to be retained beyond the life of all a user's
processes so that the user's cron jobs can work.

The kerberos cache is envisioned as a keyring/key tree looking something like:

	struct user_namespace
	  \___ .krb_cache keyring		- The register
		\___ _krb.0 keyring		- Root's Kerberos cache
		\___ _krb.5000 keyring		- User 5000's Kerberos cache
		\___ _krb.5001 keyring		- User 5001's Kerberos cache
			\___ tkt785 big_key	- A ccache blob
			\___ tkt12345 big_key	- Another ccache blob

Or possibly:

	struct user_namespace
	  \___ .krb_cache keyring		- The register
		\___ _krb.0 keyring		- Root's Kerberos cache
		\___ _krb.5000 keyring		- User 5000's Kerberos cache
		\___ _krb.5001 keyring		- User 5001's Kerberos cache
			\___ tkt785 keyring	- A ccache
				\___ krbtgt/REDHAT.COM@REDHAT.COM big_key
				\___ http/REDHAT.COM@REDHAT.COM user
				\___ afs/REDHAT.COM@REDHAT.COM user
				\___ nfs/REDHAT.COM@REDHAT.COM user
				\___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key
				\___ http/KERNEL.ORG@KERNEL.ORG big_key

What goes into a particular Kerberos cache is entirely up to userspace.  Kernel
support is limited to giving you the Kerberos cache keyring that you want.

The user asks for their Kerberos cache by:

	krb_cache = keyctl_get_krbcache(uid, dest_keyring);

The uid is -1 or the user's own UID for the user's own cache or the uid of some
other user's cache (requires CAP_SETUID).  This permits rpc.gssd or whatever to
mess with the cache.

The cache returned is a keyring named "_krb.<uid>" that the possessor can read,
search, clear, invalidate, unlink from and add links to.  Active LSMs get a
chance to rule on whether the caller is permitted to make a link.

Each uid's cache keyring is created when it first accessed and is given a
timeout that is extended each time this function is called so that the keyring
goes away after a while.  The timeout is configurable by sysctl but defaults to
three days.

Each user_namespace struct gets a lazily-created keyring that serves as the
register.  The cache keyrings are added to it.  This means that standard key
search and garbage collection facilities are available.

The user_namespace struct's register goes away when it does and anything left
in it is then automatically gc'd.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Simo Sorce <simo@redhat.com>
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
2013-09-24 10:35:19 +01:00
Linus Torvalds c7c4591db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace changes from Eric Biederman:
 "This is an assorted mishmash of small cleanups, enhancements and bug
  fixes.

  The major theme is user namespace mount restrictions.  nsown_capable
  is killed as it encourages not thinking about details that need to be
  considered.  A very hard to hit pid namespace exiting bug was finally
  tracked and fixed.  A couple of cleanups to the basic namespace
  infrastructure.

  Finally there is an enhancement that makes per user namespace
  capabilities usable as capabilities, and an enhancement that allows
  the per userns root to nice other processes in the user namespace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns:  Kill nsown_capable it makes the wrong thing easy
  capabilities: allow nice if we are privileged
  pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
  userns: Allow PR_CAPBSET_DROP in a user namespace.
  namespaces: Simplify copy_namespaces so it is clear what is going on.
  pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
  sysfs: Restrict mounting sysfs
  userns: Better restrictions on when proc and sysfs can be mounted
  vfs: Don't copy mount bind mounts of /proc/<pid>/ns/mnt between namespaces
  kernel/nsproxy.c: Improving a snippet of code.
  proc: Restrict mounting the proc filesystem
  vfs: Lock in place mounts from more privileged users
2013-09-07 14:35:32 -07:00
Eric W. Biederman e51db73532 userns: Better restrictions on when proc and sysfs can be mounted
Rely on the fact that another flavor of the filesystem is already
mounted and do not rely on state in the user namespace.

Verify that the mounted filesystem is not covered in any significant
way.  I would love to verify that the previously mounted filesystem
has no mounts on top but there are at least the directories
/proc/sys/fs/binfmt_misc and /sys/fs/cgroup/ that exist explicitly
for other filesystems to mount on top of.

Refactor the test into a function named fs_fully_visible and call that
function from the mount routines of proc and sysfs.  This makes this
test local to the filesystems involved and the results current of when
the mounts take place, removing a weird threading of the user
namespace, the mount namespace and the filesystems themselves.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-08-26 19:17:03 -07:00
Oleg Nesterov 8742f229b6 userns: limit the maximum depth of user_namespace->parent chain
Ensure that user_namespace->parent chain can't grow too much.
Currently we use the hardroded 32 as limit.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-08 13:11:39 -07:00
Oleg Nesterov 6160968cee userns: unshare_userns(&cred) should not populate cred on failure
unshare_userns(new_cred) does *new_cred = prepare_creds() before
create_user_ns() which can fail. However, the caller expects that
it doesn't need to take care of new_cred if unshare_userns() fails.

We could change the single caller, sys_unshare(), but I think it
would be more clean to avoid the side effects on failure, so with
this patch unshare_userns() does put_cred() itself and initializes
*new_cred only if create_user_ns() succeeeds.

Cc: stable@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-06 13:13:24 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
David Howells 0bb80f2405 proc: Split the namespace stuff out into linux/proc_ns.h
Split the proc namespace stuff out into linux/proc_ns.h.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: netdev@vger.kernel.org
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:39 -04:00
Andy Lutomirski 41c21e351e userns: Changing any namespace id mappings should require privileges
Changing uid/gid/projid mappings doesn't change your id within the
namespace; it reconfigures the namespace.  Unprivileged programs should
*not* be able to write these files.  (We're also checking the privileges
on the wrong task.)

Given the write-once nature of these files and the other security
checks, this is likely impossible to usefully exploit.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2013-04-14 18:11:32 -07:00
Andy Lutomirski e3211c120a userns: Check uid_map's opener's fsuid, not the current fsuid
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2013-04-14 18:11:31 -07:00
Eric W. Biederman 6708075f10 userns: Don't let unprivileged users trick privileged users into setting the id_map
When we require privilege for setting /proc/<pid>/uid_map or
/proc/<pid>/gid_map no longer allow an unprivileged user to
open the file and pass it to a privileged program to write
to the file.

Instead when privilege is required require both the opener and the
writer to have the necessary capabilities.

I have tested this code and verified that setting /proc/<pid>/uid_map
fails when an unprivileged user opens the file and a privielged user
attempts to set the mapping, that unprivileged users can still map
their own id, and that a privileged users can still setup an arbitrary
mapping.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2013-04-14 18:11:14 -07:00
Eric W. Biederman 87a8ebd637 userns: Restrict when proc and sysfs can be mounted
Only allow unprivileged mounts of proc and sysfs if they are already
mounted when the user namespace is created.

proc and sysfs are interesting because they have content that is
per namespace, and so fresh mounts are needed when new namespaces
are created while at the same time proc and sysfs have content that
is shared between every instance.

Respect the policy of who may see the shared content of proc and sysfs
by only allowing new mounts if there was an existing mount at the time
the user namespace was created.

In practice there are only two interesting cases: proc and sysfs are
mounted at their usual places, proc and sysfs are not mounted at all
(some form of mount namespace jail).

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-27 07:50:08 -07:00
Eric W. Biederman 3151527ee0 userns: Don't allow creation if the user is chrooted
Guarantee that the policy of which files may be access that is
established by setting the root directory will not be violated
by user namespaces by verifying that the root directory points
to the root of the mount namespace at the time of user namespace
creation.

Changing the root is a privileged operation, and as a matter of policy
it serves to limit unprivileged processes to files below the current
root directory.

For reasons of simplicity and comprehensibility the privilege to
change the root directory is gated solely on the CAP_SYS_CHROOT
capability in the user namespace.  Therefore when creating a user
namespace we must ensure that the policy of which files may be access
can not be violated by changing the root directory.

Anyone who runs a processes in a chroot and would like to use user
namespace can setup the same view of filesystems with a mount
namespace instead.  With this result that this is not a practical
limitation for using user namespaces.

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-27 07:49:29 -07:00
Eric W. Biederman e66eded830 userns: Don't allow CLONE_NEWUSER | CLONE_FS
Don't allowing sharing the root directory with processes in a
different user namespace.  There doesn't seem to be any point, and to
allow it would require the overhead of putting a user namespace
reference in fs_struct (for permission checks) and incrementing that
reference count on practically every call to fork.

So just perform the inexpensive test of forbidding sharing fs_struct
acrosss processes in different user namespaces.  We already disallow
other forms of threading when unsharing a user namespace so this
should be no real burden in practice.

This updates setns, clone, and unshare to disallow multiple user
namespaces sharing an fs_struct.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13 15:00:20 -07:00
Eric W. Biederman 0bd14b4fd7 userns: Allow any uid or gid mappings that don't overlap.
When I initially wrote the code for /proc/<pid>/uid_map.  I was lazy
and avoided duplicate mappings by the simple expedient of ensuring the
first number in a new extent was greater than any number in the
previous extent.

Unfortunately that precludes a number of valid mappings, and someone
noticed and complained.  So use a simple check to ensure that ranges
in the mapping extents don't overlap.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-01-26 22:12:04 -08:00
Eric W. Biederman c61a2810a2 userns: Avoid recursion in put_user_ns
When freeing a deeply nested user namespace free_user_ns calls
put_user_ns on it's parent which may in turn call free_user_ns again.
When -fno-optimize-sibling-calls is passed to gcc one stack frame per
user namespace is left on the stack, potentially overflowing the
kernel stack.  CONFIG_FRAME_POINTER forces -fno-optimize-sibling-calls
so we can't count on gcc to optimize this code.

Remove struct kref and use a plain atomic_t.  Making the code more
flexible and easier to comprehend.  Make the loop in free_user_ns
explict to guarantee that the stack does not overflow with
CONFIG_FRAME_POINTER enabled.

I have tested this fix with a simple program that uses unshare to
create a deeply nested user namespace structure and then calls exit.
With 1000 nesteuser namespaces before this change running my test
program causes the kernel to die a horrible death.  With 10,000,000
nested user namespaces after this change my test program runs to
completion and causes no harm.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Pointed-out-by: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-01-26 22:11:41 -08:00
Eric W. Biederman 5155040ed3 userns: Fix typo in description of the limitation of userns_install
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-14 18:36:36 -08:00
Eric W. Biederman 98f842e675 proc: Usable inode numbers for the namespace file descriptors.
Assign a unique proc inode to each namespace, and use that
inode number to ensure we only allocate at most one proc
inode for every namespace in proc.

A single proc inode per namespace allows userspace to test
to see if two processes are in the same namespace.

This has been a long requested feature and only blocked because
a naive implementation would put the id in a global space and
would ultimately require having a namespace for the names of
namespaces, making migration and certain virtualization tricks
impossible.

We still don't have per superblock inode numbers for proc, which
appears necessary for application unaware checkpoint/restart and
migrations (if the application is using namespace file descriptors)
but that is now allowd by the design if it becomes important.

I have preallocated the ipc and uts initial proc inode numbers so
their structures can be statically initialized.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-20 04:19:49 -08:00
Eric W. Biederman c450f371d4 userns: For /proc/self/{uid,gid}_map derive the lower userns from the struct file
To keep things sane in the context of file descriptor passing derive the
user namespace that uids are mapped into from the opener of the file
instead of from current.

When writing to the maps file the lower user namespace must always
be the parent user namespace, or setting the mapping simply does
not make sense.  Enforce that the opener of the file was in
the parent user namespace or the user namespace whose mapping
is being set.

Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:18:55 -08:00
Eric W. Biederman b2e0d98705 userns: Implement unshare of the user namespace
- Add CLONE_THREAD to the unshare flags if CLONE_NEWUSER is selected
  As changing user namespaces is only valid if all there is only
  a single thread.
- Restore the code to add CLONE_VM if CLONE_THREAD is selected and
  the code to addCLONE_SIGHAND if CLONE_VM is selected.
  Making the constraints in the code clear.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:18:14 -08:00
Eric W. Biederman cde1975bc2 userns: Implent proc namespace operations
This allows entering a user namespace, and the ability
to store a reference to a user namespace with a bind
mount.

Addition of missing userns_ns_put in userns_install
from Gao feng <gaofeng@cn.fujitsu.com>

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:18:13 -08:00
Eric W. Biederman 37657da3c5 userns: Allow setting a userns mapping to your current uid.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:17:40 -08:00
Eric W. Biederman f76d207a66 userns: Add kprojid_t and associated infrastructure in projid.h
Implement kprojid_t a cousin of the kuid_t and kgid_t.

The per user namespace mapping of project id values can be set with
/proc/<pid>/projid_map.

A full compliment of helpers is provided: make_kprojid, from_kprojid,
from_kprojid_munged, kporjid_has_mapping, projid_valid, projid_eq,
projid_eq, projid_lt.

Project identifiers are part of the generic disk quota interface,
although it appears only xfs implements project identifiers currently.

The xfs code allows anyone who has permission to set the project
identifier on a file to use any project identifier so when
setting up the user namespace project identifier mappings I do
not require a capability.

Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18 01:01:37 -07:00
Eric W. Biederman 078de5f706 userns: Store uid and gid values in struct cred with kuid_t and kgid_t types
cred.h and a few trivial users of struct cred are changed.  The rest of the users
of struct cred are left for other patches as there are too many changes to make
in one go and leave the change reviewable.  If the user namespace is disabled and
CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile
and behave correctly.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:28:38 -07:00
Eric W. Biederman 22d917d80e userns: Rework the user_namespace adding uid/gid mapping support
- Convert the old uid mapping functions into compatibility wrappers
- Add a uid/gid mapping layer from user space uid and gids to kernel
  internal uids and gids that is extent based for simplicty and speed.
  * Working with number space after mapping uids/gids into their kernel
    internal version adds only mapping complexity over what we have today,
    leaving the kernel code easy to understand and test.
- Add proc files /proc/self/uid_map /proc/self/gid_map
  These files display the mapping and allow a mapping to be added
  if a mapping does not exist.
- Allow entering the user namespace without a uid or gid mapping.
  Since we are starting with an existing user our uids and gids
  still have global mappings so are still valid and useful they just don't
  have local mappings.  The requirement for things to work are global uid
  and gid so it is odd but perfectly fine not to have a local uid
  and gid mapping.
  Not requiring global uid and gid mappings greatly simplifies
  the logic of setting up the uid and gid mappings by allowing
  the mappings to be set after the namespace is created which makes the
  slight weirdness worth it.
- Make the mappings in the initial user namespace to the global
  uid/gid space explicit.  Today it is an identity mapping
  but in the future we may want to twist this for debugging, similar
  to what we do with jiffies.
- Document the memory ordering requirements of setting the uid and
  gid mappings.  We only allow the mappings to be set once
  and there are no pointers involved so the requirments are
  trivial but a little atypical.

Performance:

In this scheme for the permission checks the performance is expected to
stay the same as the actuall machine instructions should remain the same.

The worst case I could think of is ls -l on a large directory where
all of the stat results need to be translated with from kuids and
kgids to uids and gids.  So I benchmarked that case on my laptop
with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache.

My benchmark consisted of going to single user mode where nothing else
was running. On an ext4 filesystem opening 1,000,000 files and looping
through all of the files 1000 times and calling fstat on the
individuals files.  This was to ensure I was benchmarking stat times
where the inodes were in the kernels cache, but the inode values were
not in the processors cache.  My results:

v3.4-rc1:         ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled)
v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled)
v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled)

All of the configurations ran in roughly 120ns when I performed tests
that ran in the cpu cache.

So in summary the performance impact is:
1ns improvement in the worst case with user namespace support compiled out.
8ns aka 5% slowdown in the worst case with user namespace support compiled in.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-26 02:01:39 -07:00
Eric W. Biederman 783291e690 userns: Simplify the user_namespace by making userns->creator a kuid.
- Transform userns->creator from a user_struct reference to a simple
  kuid_t, kgid_t pair.

  In cap_capable this allows the check to see if we are the creator of
  a namespace to become the classic suser style euid permission check.

  This allows us to remove the need for a struct cred in the mapping
  functions and still be able to dispaly the user namespace creators
  uid and gid as 0.

- Remove the now unnecessary delayed_work in free_user_ns.

  All that is left for free_user_ns to do is to call kmem_cache_free
  and put_user_ns.  Those functions can be called in any context
  so call them directly from free_user_ns removing the need for delayed work.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-26 02:00:59 -07:00
Eric W. Biederman 7b44ab978b userns: Disassociate user_struct from the user_namespace.
Modify alloc_uid to take a kuid and make the user hash table global.
Stop holding a reference to the user namespace in struct user_struct.

This simplifies the code and makes the per user accounting not
care about which user namespace a uid happens to appear in.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 17:11:46 -07:00