Commit Graph

1416 Commits

Author SHA1 Message Date
Linus Torvalds 33f724eb9e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: enable 36bit physical address for hardware status page
  drm/i915: fix eDP pipe mask
  drm/i915: fix pixel color depth setting on eDP
  drm/i915: parse eDP panel color depth from VBT block
  drm/i915: disable LVDS downclock by default
  drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
  drm/i915: Remove chatty execbuf failure message.
  drm/i915: remove loop in Ironlake interrupt handler
  drm/i915: Don't wait interruptible for possible plane buffer flush
  drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
  drm/i915: Read the response after issuing DDC bus switch command
  drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
  drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
  drm/i915: Fix Ironlake M/N/P ranges to match the spec
  drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
  drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
  drm/i915: disable TV hotplug status check

Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.
2010-01-16 10:44:38 -08:00
Zhenyu Wang 9b974cc171 drm/i915: enable 36bit physical address for hardware status page
This enables possible 36bit address mask on 965G that use physical
address for hw status page.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:50:14 -08:00
Zhenyu Wang 6251ec0ae2 drm/i915: fix eDP pipe mask
eDP could be on pipe A or B.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:13:18 -08:00
Zhenyu Wang 885a5fb5b1 drm/i915: fix pixel color depth setting on eDP
Original DP mode_valid check didn't take pixel color depth into account,
which made one 1600x900 eDP panel's mode check invalid because of overclock,
but actually this 6bpc panel does can work with x1 lane at 2.7G. This one
trys to take bpp value properly both in mode validation and mode setting.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:13:06 -08:00
Zhenyu Wang 500a8cc466 drm/i915: parse eDP panel color depth from VBT block
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:12:47 -08:00
Jesse Barnes 33814341f2 drm/i915: disable LVDS downclock by default
Many platform support this feature, and it can provide significant
power savings when the reduced refresh rate is low.  However, on some
platforms a secondary (reduced) timing is provided but not actually
supported by the hardware.  This results in undesirable flicker at
runtime.

So disable the feature by default, but allow users to opt-in to the
reduced clock behavior with a new module parameter, lvds_downclock,
that can be set to 1 to enable the feature.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:08:01 -08:00
Zhao Yakui 21bd770b9c drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:06:19 -08:00
Eric Anholt 6036ae7e94 drm/i915: Remove chatty execbuf failure message.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> (in principle)
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 13:05:36 -08:00
Zou Nan hai c7c85101af drm/i915: remove loop in Ironlake interrupt handler
On Ironlake, there is an interrupt master control bit. With the bit
disabled before clearing IIR, we do not need to handle extra interrupt
in a loop. This patch removes the loop in Ironlake interrupt handler.
It fixed irq lost issue on some Ironlake platforms.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Zou Nan hai <Nanhai.zou@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 11:23:49 -08:00
Linus Torvalds 004b350632 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: change drm set mode messages as DRM_DEBUG
  drm: fix crtc no modes printf + typo
  drm/radeon/kms: only evict to GTT if CP is ready
  drm/radeon/kms: Fix crash getting TV info with no BIOS.
  drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2)
  drm/radeon/kms/r6xx+: make irq handler less verbose
  drm/radeon/kms: fix up LVDS handling on macs (v2)
2010-01-13 16:13:57 -08:00
Dave Airlie 194fda0dd8 Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next
  drm/radeon/kms: only evict to GTT if CP is ready
  drm/radeon/kms: Fix crash getting TV info with no BIOS.
  drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2)
  drm/radeon/kms/r6xx+: make irq handler less verbose
  drm/radeon/kms: fix up LVDS handling on macs (v2)
2010-01-13 16:17:41 +10:00
Dave Young ef14587706 drm: change drm set mode messages as DRM_DEBUG
Following drm info repeat 207 times during one hour, it's quite annoying
[ 1266.286747] [drm] TV-19: set mode NTSC 480i 0

Change from DRM_INFO to DRM_DEBUG

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 16:16:05 +10:00
Dave Airlie 70a94d6a35 drm: fix crtc no modes printf + typo
Toralf Förster pointed out the typo, the fact I forget the if
statement is purely personal fail.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 16:15:11 +10:00
Dave Chinner 2c761270d5 lib: Introduce generic list_sort function
There are two copies of list_sort() in the tree already, one in the DRM
code, another in ubifs.  Now XFS needs this as well.  Create a generic
list_sort() function from the ubifs version and convert existing users
to it so we don't end up with yet another copy in the tree.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-12 21:02:00 -08:00
Dave Airlie 9270eb1b49 drm/radeon/kms: only evict to GTT if CP is ready
Testing GTT ready might be more correct but cp.ready
works fine and has been tested on irc by 2-3 ppl.

fixes bug k.org 15035 and fd.o 25733

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 13:25:14 +10:00
Michel Dänzer 11f3b59e36 drm/radeon/kms: Fix crash getting TV info with no BIOS.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 13:25:10 +10:00
Alex Deucher 1b24203e51 drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2)
Due to heat issues.  Fixes fdo bug 25992

v2: fix typo noticed by Maarten Maathuis

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 13:25:10 +10:00
Alex Deucher b042589ca0 drm/radeon/kms/r6xx+: make irq handler less verbose
Unhandled vectors can be safely ignored, no need
to spam the kernel log by default.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 13:25:09 +10:00
Alex Deucher 3890ddf56d drm/radeon/kms: fix up LVDS handling on macs (v2)
Based on radeonfb code and recent ddx fix.

v2: minor formatting fix from Michel Dänzer

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Tested-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13 13:25:08 +10:00
Zhenyu Wang b9241ea31f drm/i915: Don't wait interruptible for possible plane buffer flush
When we setup buffer for display plane, we'll check any pending
required GPU flush and possible make interruptible wait for flush
complete. But that wait would be most possibly to fail in case of
signals received for X process, which will then fail modeset process
and put display engine in unconsistent state. The result could be
blank screen or CPU hang, and DDX driver would always turn on outputs
DPMS after whatever modeset fails or not.

So this one creates new helper for setup display plane buffer, and
when needing flush using uninterruptible wait for that.

This one should fix bug like https://bugs.freedesktop.org/show_bug.cgi?id=24009.
Also fixing mode switch stress test on Ironlake.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-12 15:07:34 -08:00
Zhao Yakui 7c3f0a2726 drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
There exist multiple DDC buses for the SDVO cards with multiple outputs.
When we can't get the EDID by using the select DDC bus, we can try the other
possible DDC bus to see whether the EDID can be obtained.

https://bugs.freedesktop.org/show_bug.cgi?id=23842

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-12 14:54:07 -08:00
Zhao Yakui 6a304caf0b drm/i915: Read the response after issuing DDC bus switch command
For some SDVO cards based on conexant chip, we can't read the EDID if
we don't read the response after issuing SDVO DDC bus switch
command.

From the SDVO spec once when another I2C transaction is finished after
completing the I2C transaction of issuing the bus switch command, it
will be switched back to the SDVO internal state again. So we can't
initiate a new I2C transaction to read the response after issuing the
DDC bus switch command. Instead we should issue DDC bus switch command
and read the response in the same I2C transaction.

https://bugs.freedesktop.org/show_bug.cgi?id=23842
https://bugs.freedesktop.org/show_bug.cgi?id=24458
https://bugs.freedesktop.org/show_bug.cgi?id=24522
https://bugs.freedesktop.org/show_bug.cgi?id=24282

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-12 14:52:38 -08:00
Zhao Yakui 6207937d4f drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
On some boxes the BIOS will report different child device arrays when
the system is booted with/without the dock. In such case the HDMI/DP
port can't be setup correctly.  So revert two commits
(fc816655236cd9da162356e96e74c7cfb0834d92/
6e36595a21) that use the child device
parsed from VBT to setup HDMI/DP.

http://bugzilla.kernel.org/show_bug.cgi?id=14854
http://bugzilla.kernel.org/show_bug.cgi?id=14860

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Sean Young <sean@mess.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-12 14:40:03 -08:00
Rafael J. Wysocki d8e292093a drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
Commit cbda12d77e (drm/i915: implement
new pm ops for i915), among other things, removed the .suspend and
.resume pointers from the struct drm_driver object in i915_drv.c,
which broke resume without KMS on my MSI Wind U100.

Fix this by reverting that part of commit cbda12d77e.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: added comment explaining when .suspend/.resume matter]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-12 14:30:06 -08:00
Linus Torvalds c07d7237a6 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (45 commits)
  drm/nv04: Fix set_operation software method.
  drm/nouveau: initialise DMA tracking parameters earlier
  drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
  drm/nv04: differentiate between nv04/nv05
  drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
  drm/nv50: prevent a possible ctxprog hang
  drm/nouveau: have ttm's fault handler called directly
  drm/nv50: restore correct cache1 get/put address on fifoctx load
  drm/nouveau: create function for "dealing" with gpu lockup
  drm/nouveau: remove unused nouveau_channel_idle() function
  drm/nouveau: fix handling of fbcon colours in 8bpp
  drm/nv04: Context switching fixes.
  drm/nouveau: Use the software object for fencing.
  drm/nouveau: Allocate a per-channel instance of NV_SW.
  drm/nv50: make the blocksize depend on vram size
  drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
  drm/nouveau: Don't skip card take down on nv0x.
  drm/nouveau: Implement nv42-nv43 TV load detection.
  drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
  drm/nv50: fix fillrect color
  ...
2010-01-11 09:46:20 -08:00
Dave Airlie f22d6ddaeb Merge branch 'for-airlied' of /ssd/git/drm-nouveau-next into drm-linus
* 'for-airlied' of /ssd/git/drm-nouveau-next: (28 commits)
  drm/nv04: Fix set_operation software method.
  drm/nouveau: initialise DMA tracking parameters earlier
  drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
  drm/nv04: differentiate between nv04/nv05
  drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
  drm/nv50: prevent a possible ctxprog hang
  drm/nouveau: have ttm's fault handler called directly
  drm/nv50: restore correct cache1 get/put address on fifoctx load
  drm/nouveau: create function for "dealing" with gpu lockup
  drm/nouveau: remove unused nouveau_channel_idle() function
  drm/nouveau: fix handling of fbcon colours in 8bpp
  drm/nv04: Context switching fixes.
  drm/nouveau: Use the software object for fencing.
  drm/nouveau: Allocate a per-channel instance of NV_SW.
  drm/nv50: make the blocksize depend on vram size
  drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
  drm/nouveau: Don't skip card take down on nv0x.
  drm/nouveau: Implement nv42-nv43 TV load detection.
  drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
  drm/nv50: fix fillrect color
  ...
2010-01-11 14:43:16 +10:00
Dave Airlie 0c9d2c418a Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next:
  drm/radeon/kms: add additional safe regs for r4xx/rs6xx and r5xx
  drm/radeon/kms: Don't try to enable IRQ if we have no handler installed
  drm: Avoid calling vblank function is vblank wasn't initialized
  drm/radeon: mkregtable.c: close a file before exit
  drm/radeon/kms: Make sure we release AGP device if we acquired it
  drm/radeon/kms: Schedule host path read cache flush through the ring V2
  drm/radeon/kms: Workaround RV410/R420 CP errata (V3)
  drm/radeon/kms: detect sideport memory on IGP chips
  drm/radeon: fix a couple of array index errors
  drm/radeon/kms: add support for eDP (embedded DisplayPort)
  drm: Add eDP connector type
  drm/radeon/kms: pull in the latest upstream ObjectID.h changes
  drm/radeon/kms: whitespace changes to ObjectID.h
  drm/radeon/kms: fix typo in atom connector type handling
2010-01-11 14:42:58 +10:00
Marcin Kościelnicki 40c2298bdc drm/nv04: Fix set_operation software method.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:19 +10:00
Ben Skeggs c63834e1db drm/nouveau: initialise DMA tracking parameters earlier
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:18 +10:00
Ben Skeggs 400f14ac4e drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
Some upcoming G80 DMA changes will depend on this, but it's split out for
bisectibility just in case it causes some unexpected issues.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:18 +10:00
Ben Skeggs cc6e496587 drm/nv04: differentiate between nv04/nv05
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:17 +10:00
Luca Barbieri d6126c5c8b drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
Currently Nouveau will unvalidate all buffers if it is forced to wait on
one, and then start revalidating from the beginning.  While doing so, it
destroys the operation fence, causing nouveau_fence_emit to crash.

This patch fixes this bug by taking the fence object out of validate_op
and creating it just before emit.  The fence pointer is initialized to 0
and unref'ed unconditionally.

In addition to fixing the bug, this prevents its reintroduction and
simplifies the code.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:17 +10:00
Ben Skeggs dc8d76cac9 drm/nv50: prevent a possible ctxprog hang
The below is mainly an educated guess at what's going on, docs would
sure be handy...  NVIDIA? :P

It appears it's possible for a ctxprog to run even while a GPU exception
is pending.  The GF8 and up ctxprogs appear to have a small snippet of
code which detects this, and stalls the ctxprog until it's been handled,
which essentially looks like:

	if (r2 & 0x00008000) {
		r0 |= 0x80000000;
		while (r0 & 0x80000000) {}
	}

I don't know of any way that flag would get cleared unless the driver
intervenes (and indeed, in the cases I've seen the hang, nothing steps
in to automagically clear it for us).  This patch causes the driver to
clear the flag during the PGRAPH IRQ handler.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:16 +10:00
Ben Skeggs 1959ca80e1 drm/nouveau: have ttm's fault handler called directly
There's no good reason for us to have our own anymore, this is left over
from an early port to these TTM interfaces.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:15 +10:00
Ben Skeggs a908b96c22 drm/nv50: restore correct cache1 get/put address on fifoctx load
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:15 +10:00
Marcin Slusarz c03ec7f91f drm/nouveau: create function for "dealing" with gpu lockup
It's mostly a cleanup, but in nv50_fbcon_accel_init gpu lockup
message was printed, but HWACCEL_DISBALED flag was not set.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:14 +10:00
Ben Skeggs e9dd8e11ed drm/nouveau: remove unused nouveau_channel_idle() function
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:13 +10:00
Ben Skeggs 7de3643f93 drm/nouveau: fix handling of fbcon colours in 8bpp
Depending on the visual, the colours handed to us in fillrect() can either be
an actual colour, or an index into the pseudo-palette.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:13 +10:00
Francisco Jerez ea911a1cf4 drm/nv04: Context switching fixes.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:12 +10:00
Francisco Jerez a5027ccd3c drm/nouveau: Use the software object for fencing.
This should avoid a race condition on nv0x, if we're doing it with
actual PGRAPH objects and a there's a fence within the FIFO DMA fetch
area when a context switch kicks in.

In that case we get an ILLEGAL_MTHD interrupt as expected, but the
values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're
almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive
channel, with a wrong offset/data pair).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:12 +10:00
Francisco Jerez ca4362adb4 drm/nouveau: Allocate a per-channel instance of NV_SW.
It will be useful for various synchronization purposes, mostly stolen
from "[PATCH] drm/nv50: synchronize user channel after buffer object
move on kernel channel" by Maarten Maathuis.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:11 +10:00
Maarten Maathuis 0a2d090f99 drm/nv50: make the blocksize depend on vram size
- This should be better than what we have now.
- I'm less sure about the non power of two path.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
2010-01-11 14:41:10 +10:00
Maarten Maathuis c2b82924bd drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
- Aligning to block size should ensure that the extra size is enough.
- Using roundup, because not all sizes are powers of two.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
2010-01-11 14:41:10 +10:00
Francisco Jerez 8f71c29e44 drm/nouveau: Don't skip card take down on nv0x.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:09 +10:00
Francisco Jerez b7f7e41b89 drm/nouveau: Implement nv42-nv43 TV load detection.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:08 +10:00
Francisco Jerez 02076da97a drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:08 +10:00
Marcin Slusarz e55ca7e68e drm/nv50: fix fillrect color
struct fb_fillrect->color is not a color, but index into pseudo_palette
array

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:07 +10:00
Ben Skeggs fbe36a7a06 drm/nv50: ignore vbios table's claim to the contrary if EDID says >8bpc
Should fix dim panel issues reported on Dell M6400/M6500.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:07 +10:00
Francisco Jerez aeca15e596 drm/nouveau: Drop redundant placement initialization.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:06 +10:00
Francisco Jerez 69a18c328b drm/nouveau: No need to force evict=true when swapping evicted BOs back in.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:05 +10:00