Commit Graph

283 Commits

Author SHA1 Message Date
Randy Dunlap b943c460ff menu: fix embedded menu snafu
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in
the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu.
Fix by moving it to just after all of the EMBEDDED menu symbols.  Also,
ANON_INODES has a similar problem, so move it to just above the EMBEDDED
menu items since it is used in the EMBEDDED menu.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10 15:55:10 -07:00
Ingo Molnar f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Ingo Molnar 8b0e5860cb Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', 'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/core 2009-03-04 02:22:31 +01:00
Linus Torvalds 2450cf51a1 Revert "menu: fix embedded menu snafu"
This reverts commit 155b25bcc2, which was
totally wrong - the "embedded" options still exists (very much so) even
on non-embedded platforms.

It's just that we don't bother with actually asking about them when
we're not embedded, we just take their default values (which is usually
'y' - the options add features that may not be worth it in a constrained
environment).

Noticed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-02 16:23:33 -08:00
Randy Dunlap 155b25bcc2 menu: fix embedded menu snafu
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in
the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED
menu.  Fix by moving it to just after all of the EMBEDDED menu symbols.

Also, surround all of the EMBEDDED symbols with "if EMBEDDED"/"endif" so
that this EMBEDDED block is clearer.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-02 15:49:16 -08:00
Frederic Weisbecker 91f73f90d9 tracing/markers: make markers select tracepoints
Sometimes it happens that KConfig dependencies are not handled
like in the following scenario:

- config A
   bool

- config B
   bool
   depends on A

- config C
   bool
   select B

If one selects C, then it will select B without checking its
dependency to A, if A hasn't been selected elsewhere, it will
result in a build failure.

This is what happens on the following build error:

 kernel/built-in.o: In function `marker_update_probe_range':
 (.text+0x52f64): undefined reference to `tracepoint_probe_register_noupdate'
 kernel/built-in.o: In function `marker_update_probe_range':
 (.text+0x52f74): undefined reference to `tracepoint_probe_unregister_noupdate'
 kernel/built-in.o: In function `marker_update_probe_range':
 (.text+0x52fb9): undefined reference to `tracepoint_probe_unregister_noupdate'
 kernel/built-in.o: In function `marker_update_probes':
 marker.c:(.text+0x530ba): undefined reference to `tracepoint_probe_update_all'

CONFIG_KVM_TRACE will select CONFIG_MARKER, but the latter
depends on CONFIG_TRACEPOINTS which will not be selected.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20 19:30:04 +01:00
Ingo Molnar 95fd4845ed Merge commit 'v2.6.29-rc4' into perfcounters/core
Conflicts:
	arch/x86/kernel/setup_percpu.c
	arch/x86/mm/fault.c
	drivers/acpi/processor_idle.c
	kernel/irq/handle.c
2009-02-11 09:22:04 +01:00
Ingo Molnar 140573d33b Merge branches 'sched/rt' and 'sched/urgent' into sched/core 2009-02-08 20:12:46 +01:00
Linus Torvalds 2034563ca3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: fix kbuild.txt typos
  kbuild: print usage with no arguments in scripts/config
  Revert "kbuild: strip generated symbols from *.ko"
2009-01-26 15:10:37 -08:00
Linus Torvalds 924d26df6b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (92 commits)
  gianfar: Revive VLAN support
  vlan: Export symbols as non GPL symbols.
  bnx2x: tx_has_work should not wait for FW
  netxen: reduce memory footprint
  netxen: fix vlan tso/checksum offload
  net: Fix linux/if_frad.h's suitability for userspace.
  net: Move config NET_NS to from net/Kconfig to init/Kconfig
  isdn: Fix missing ifdef in isdn_ppp
  networking: document "nc" in addition to "netcat" in netconsole.txt
  e1000e: workaround hw errata
  af_key: initialize xfrm encap_oa
  virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs
  lcs: fix compilation for !CONFIG_IP_MULTICAST
  rtl8187: Add termination packet to prevent stall
  iwlwifi: fix rs_get_rate WARN_ON()
  p54usb: fix packet loss with first generation devices
  sctp: Fix another socket race during accept/peeloff
  sctp: Properly timestamp outgoing data chunks for rtx purposes
  sctp: Correctly start rtx timer on new packet transmissions.
  sctp: Fix crc32c calculations on big-endian arhes.
  ...
2009-01-26 15:09:20 -08:00
Matt Helsley d6eb633fe6 net: Move config NET_NS to from net/Kconfig to init/Kconfig
Make NET_NS available underneath the generic Namespaces config option
since all of the other namespace options are there.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 12:25:55 -08:00
Thomas Gleixner 6552ebae25 Merge branch 'core/debugobjects' into core/urgent 2009-01-22 10:03:02 +01:00
Ingo Molnar 77835492ed Merge commit 'v2.6.29-rc2' into perfcounters/core
Conflicts:
	include/linux/syscalls.h
2009-01-21 16:37:27 +01:00
Peter Zijlstra ceacc2c1c8 sched: make plist a library facility
Ingo Molnar wrote:

> here's a new build failure with tip/sched/rt:
>
>   LD      .tmp_vmlinux1
> kernel/built-in.o: In function `set_curr_task_rt':
> sched.c:(.text+0x3675): undefined reference to `plist_del'
> kernel/built-in.o: In function `pick_next_task_rt':
> sched.c:(.text+0x37ce): undefined reference to `plist_del'
> kernel/built-in.o: In function `enqueue_pushable_task':
> sched.c:(.text+0x381c): undefined reference to `plist_del'

Eliminate the plist library kconfig and make it available
unconditionally.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 15:01:31 +01:00
Li Zefan 45ce80fb6b cgroups: consolidate cgroup documents
Move Documentation/cpusets.txt and Documentation/controllers/* to
Documentation/cgroups/

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:37 -08:00
Li Zefan 23964d2d02 cgroups: clean up Kconfig
- move CONFIG_PROC_PID_CPUSET into cgroup menu
- move MM_OWNER to the bottom for better menu indent
- fix typos
- use tabs not spaces

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:37 -08:00
Mike Travis c903ff8379 rcu: move Kconfig menu
Move RCU Kconfig options from top-level menu to an "RCU Subsystem"
menu under the "General Setup" menu.

Signed-off-by: Mike Travis <travis@sgi.com>
Tested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15 23:12:40 +01:00
Sam Ravnborg 2ea038917b Revert "kbuild: strip generated symbols from *.ko"
This reverts commit ad7a953c52.

And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL")
            9bb482476c

These stripping patches has caused a set of issues:

1) People have reported compatibility issues with binutils due to
   lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2
   Reported by: Wenji
2) ccache and distcc no longer works as expeced
   Reported by: Ted, Roland, + others
3) The installed modules increased a lot in size
   Reported by: Ted, Davej + others

Reported-by: Wenji Huang <wenji.huang@oracle.com>
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-14 21:38:20 +01:00
Ingo Molnar 506c10f26c Merge commit 'v2.6.29-rc1' into perfcounters/core
Conflicts:
	include/linux/kernel_stat.h
2009-01-11 02:42:53 +01:00
Ingo Molnar b17304245f Merge branch 'linus' into x86/setup-lzma
Conflicts:
	init/do_mounts_rd.c
2009-01-10 12:04:41 +01:00
KAMEZAWA Hiroyuki c077719be8 memcg: mem+swap controller Kconfig
Config and control variable for mem+swap controller.

This patch adds CONFIG_CGROUP_MEM_RES_CTLR_SWAP
(memory resource controller swap extension.)

For accounting swap, it's obvious that we have to use additional memory to
remember "who uses swap".  This adds more overhead.  So, it's better to
offer "choice" to users.  This patch adds 2 choices.

This patch adds 2 parameters to enable swap extension or not.
  - CONFIG
  - boot option

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
Li Zefan c9d5409f8d memcg: fix a typo in Kconfig
s/contoller/controller/

Signed-of-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:02 -08:00
KAMEZAWA Hiroyuki 5cdc38f985 cgroups: make cgroup config a submenu
Making CGROUP related configs be a sub-menu.

This patch make CGROUP related configs be a sub-menu and makes 1st level
configs of "General Setup" shorter.

 including following additional changes
  - add help comment about CGROUPS and GROUP_SCHED.
  - moved MM_OWNER config to the bottom.
    (for good indent in menuconfig)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:01 -08:00
Linus Torvalds 40d7ee5d16 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits)
  uio: make uio_info's name and version const
  UIO: Documentation for UIO ioport info handling
  UIO: Pass information about ioports to userspace (V2)
  UIO: uio_pdrv_genirq: allow custom irq_flags
  UIO: use pci_ioremap_bar() in drivers/uio
  arm: struct device - replace bus_id with dev_name(), dev_set_name()
  libata: struct device - replace bus_id with dev_name(), dev_set_name()
  avr: struct device - replace bus_id with dev_name(), dev_set_name()
  block: struct device - replace bus_id with dev_name(), dev_set_name()
  chris: struct device - replace bus_id with dev_name(), dev_set_name()
  dmi: struct device - replace bus_id with dev_name(), dev_set_name()
  gadget: struct device - replace bus_id with dev_name(), dev_set_name()
  gpio: struct device - replace bus_id with dev_name(), dev_set_name()
  gpu: struct device - replace bus_id with dev_name(), dev_set_name()
  hwmon: struct device - replace bus_id with dev_name(), dev_set_name()
  i2o: struct device - replace bus_id with dev_name(), dev_set_name()
  IA64: struct device - replace bus_id with dev_name(), dev_set_name()
  i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name()
  infiniband: struct device - replace bus_id with dev_name(), dev_set_name()
  ISDN: struct device - replace bus_id with dev_name(), dev_set_name()
  ...
2009-01-06 17:02:07 -08:00
Matt Mackall 853ac43ab1 shmem: unify regular and tiny shmem
tiny-shmem shares most of its 130 lines of code with shmem and tends to
break when particular bits of shmem get modified.  Unifying saves code and
makes keeping these two in sync much easier.

before:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    396      72       8     476	    1dc	mm/tiny-shmem.o

after:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    412	     72       8     492	    1ec	mm/shmem.o tiny

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:08 -08:00
Kay Sievers fce3e804cf sysfs: clarify SYSFS_DEPRECATED help text
This should make the help text of SYSFS_DEPRECATED more clear, that this
is _not_ about (what some people think it is) suppressing a few symlinks
and variables, but a different sysfs _layout_ with new features.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:31 -08:00
H. Peter Anvin 2e9f3bddcb bzip2/lzma: make config machinery an arch configurable
Impact: Bug fix (we should not show this menu on irrelevant architectures)

Make the config machinery to drive the gzip/bzip2/lzma selection
dependent on the architecture advertising HAVE_KERNEL_* so that we
don't display this for architectures where it doesn't matter.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-04 15:53:35 -08:00
Alain Knaff 30d65dbfe3 bzip2/lzma: config and initramfs support for bzip2/lzma decompression
Impact: New code for initramfs decompression, new features

This is the second part of the bzip2/lzma patch

The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip.  Lzma's decompresses faster
than bzip2.

It also supports ramdisks and initramfs' compressed using these two
compressors.

The functionality has been successfully used for a couple of years by
the udpcast project

This version applies to "tip" kernel 2.6.28

This part contains:
- support for new compressions (bzip2 and lzma) in initramfs and
old-style ramdisk
- config dialog for kernel compression (but new kernel compressions
not yet supported)

Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-04 15:53:35 -08:00
Johannes Berg a327ca2c26 remove CONFIG_KMOD
Now that nothing depends on it any more, remove CONFIG_KMOD.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:10 +10:30
Linus Torvalds b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Linus Torvalds 5f34fe1cfc Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.
2008-12-30 16:10:19 -08:00
Ingo Molnar e1df957670 Merge branch 'linus' into perfcounters/core
Conflicts:
	fs/exec.c
	include/linux/init_task.h

Simple context conflicts.
2008-12-29 09:45:15 +01:00
Linus Torvalds 96faec945f Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
  kbuild: strip generated symbols from *.ko
  kbuild: simplify use of genksyms
  kernel-doc: check for extra kernel-doc notations
  kbuild: add headerdep used to detect inclusion cycles in header files
  kbuild: fix string equality testing in tags.sh
  kbuild: fix make tags/cscope
  kbuild: fix make incompatibility
  kbuild: remove TAR_IGNORE
  setlocalversion: add git-svn support
  setlocalversion: print correct subversion revision
  scripts: improve the decodecode script
  scripts/package: allow custom options to rpm
  genksyms: allow to ignore symbol checksum changes
  genksyms: track symbol checksum changes
  tags and cscope support really belongs in a shell script
  kconfig: fix options to check-lxdialog.sh
  kbuild: gen_init_cpio expands shell variables in file names
  remove bashisms from scripts/extract-ikconfig
  kbuild: teach mkmakfile to be silent
  ...
2008-12-28 15:13:48 -08:00
Ingo Molnar 12d79bafb7 rcu: provide RCU options on non-preempt architectures too
Impact: build fix

Some old architectures still do not use kernel/Kconfig.preempt, so the
moving of the RCU options there broke their build:

 In file included from /home/mingo/tip/include/linux/sem.h:81,
                 from /home/mingo/tip/include/linux/sched.h:69,
                 from /home/mingo/tip/arch/alpha/kernel/asm-offsets.c:9:
 /home/mingo/tip/include/linux/rcupdate.h:62:2: error: #error "Unknown RCU implementation specified to kernel configuration"

Move these options back to init/Kconfig, which every architecture
includes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25 09:31:28 +01:00
Jan Beulich 9bb482476c allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
Building upon parts of the module stripping patch, this patch
introduces similar stripping for vmlinux when CONFIG_KALLSYMS_ALL=y.
Using CONFIG_KALLSYMS_STRIP_GENERATED reduces the overhead of
CONFIG_KALLSYMS_ALL from 245k/310k to 65k/80k for the (i386/x86-64)
kernels I tested with.

The patch also does away with the need to special case the kallsyms-
internal symbols by making them available even in the first linking
stage.

While it is a generated file, the patch includes the changes to
scripts/genksyms/keywords.c_shipped, as I'm unsure what the procedure
here is.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-19 22:47:10 +01:00
Paul E. McKenney 64db4cfff9 "Tree RCU": scalable classic RCU implementation
This patch fixes a long-standing performance bug in classic RCU that
results in massive internal-to-RCU lock contention on systems with
more than a few hundred CPUs.  Although this patch creates a separate
flavor of RCU for ease of review and patch maintenance, it is intended
to replace classic RCU.

This patch still handles stress better than does mainline, so I am still
calling it ready for inclusion.  This patch is against the -tip tree.
Nevertheless, experience on an actual 1000+ CPU machine would still be
most welcome.

Most of the changes noted below were found while creating an rcutiny
(which should permit ejecting the current rcuclassic) and while doing
detailed line-by-line documentation.

Updates from v9 (http://lkml.org/lkml/2008/12/2/334):

o	Fixes from remainder of line-by-line code walkthrough,
	including comment spelling, initialization, undesirable
	narrowing due to type conversion, removing redundant memory
	barriers, removing redundant local-variable initialization,
	and removing redundant local variables.

	I do not believe that any of these fixes address the CPU-hotplug
	issues that Andi Kleen was seeing, but please do give it a whirl
	in case the machine is smarter than I am.

	A writeup from the walkthrough may be found at the following
	URL, in case you are suffering from terminal insomnia or
	masochism:

	http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf

o	Made rcutree tracing use seq_file, as suggested some time
	ago by Lai Jiangshan.

o	Added a .csv variant of the rcudata debugfs trace file, to allow
	people having thousands of CPUs to drop the data into
	a spreadsheet.	Tested with oocalc and gnumeric.  Updated
	documentation to suit.

Updates from v8 (http://lkml.org/lkml/2008/11/15/139):

o	Fix a theoretical race between grace-period initialization and
	force_quiescent_state() that could occur if more than three
	jiffies were required to carry out the grace-period
	initialization.  Which it might, if you had enough CPUs.

o	Apply Ingo's printk-standardization patch.

o	Substitute local variables for repeated accesses to global
	variables.

o	Fix comment misspellings and redundant (but harmless) increments
	of ->n_rcu_pending (this latter after having explicitly added it).

o	Apply checkpatch fixes.

Updates from v7 (http://lkml.org/lkml/2008/10/10/291):

o	Fixed a number of problems noted by Gautham Shenoy, including
	the cpu-stall-detection bug that he was having difficulty
	convincing me was real.  ;-)

o	Changed cpu-stall detection to wait for ten seconds rather than
	three in order to reduce false positive, as suggested by Ingo
	Molnar.

o	Produced a design document (http://lwn.net/Articles/305782/).
	The act of writing this document uncovered a number of both
	theoretical and "here and now" bugs as noted below.

o	Fix dynticks_nesting accounting confusion, simplify WARN_ON()
	condition, fix kerneldoc comments, and add memory barriers
	in dynticks interface functions.

o	Add more data to tracing.

o	Remove unused "rcu_barrier" field from rcu_data structure.

o	Count calls to rcu_pending() from scheduling-clock interrupt
	to use as a surrogate timebase should jiffies stop counting.

o	Fix a theoretical race between force_quiescent_state() and
	grace-period initialization.  Yes, initialization does have to
	go on for some jiffies for this race to occur, but given enough
	CPUs...

Updates from v6 (http://lkml.org/lkml/2008/9/23/448):

o	Fix a number of checkpatch.pl complaints.

o	Apply review comments from Ingo Molnar and Lai Jiangshan
	on the stall-detection code.

o	Fix several bugs in !CONFIG_SMP builds.

o	Fix a misspelled config-parameter name so that RCU now announces
	at boot time if stall detection is configured.

o	Run tests on numerous combinations of configurations parameters,
	which after the fixes above, now build and run correctly.

Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line):

o	Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a
	changeset some time ago, and finally got around to retesting
	this option).

o	Fix some tracing bugs in rcupreempt that caused incorrect
	totals to be printed.

o	I now test with a more brutal random-selection online/offline
	script (attached).  Probably more brutal than it needs to be
	on the people reading it as well, but so it goes.

o	A number of optimizations and usability improvements:

	o	Make rcu_pending() ignore the grace-period timeout when
		there is no grace period in progress.

	o	Make force_quiescent_state() avoid going for a global
		lock in the case where there is no grace period in
		progress.

	o	Rearrange struct fields to improve struct layout.

	o	Make call_rcu() initiate a grace period if RCU was
		idle, rather than waiting for the next scheduling
		clock interrupt.

	o	Invoke rcu_irq_enter() and rcu_irq_exit() only when
		idle, as suggested by Andi Kleen.  I still don't
		completely trust this change, and might back it out.

	o	Make CONFIG_RCU_TRACE be the single config variable
		manipulated for all forms of RCU, instead of the prior
		confusion.

	o	Document tracing files and formats for both rcupreempt
		and rcutree.

Updates from v4 for those missing v5 given its bad subject line:

o	Separated dynticks interface so that NMIs and irqs call separate
	functions, greatly simplifying it.  In particular, this code
	no longer requires a proof of correctness.  ;-)

o	Separated dynticks state out into its own per-CPU structure,
	avoiding the duplicated accounting.

o	The case where a dynticks-idle CPU runs an irq handler that
	invokes call_rcu() is now correctly handled, forcing that CPU
	out of dynticks-idle mode.

o	Review comments have been applied (thank you all!!!).
	For but one example, fixed the dynticks-ordering issue that
	Manfred pointed out, saving me much debugging.  ;-)

o	Adjusted rcuclassic and rcupreempt to handle dynticks changes.

Attached is an updated patch to Classic RCU that applies a hierarchy,
greatly reducing the contention on the top-level lock for large machines.
This passes 10-hour concurrent rcutorture and online-offline testing on
128-CPU ppc64 without dynticks enabled, and exposes some timekeeping
bugs in presence of dynticks (exciting working on a system where
"sleep 1" hangs until interrupted...), which were fixed in the
2.6.27 kernel.  It is getting more reliable than mainline by some
measures, so the next version will be against -tip for inclusion.
See also Manfred Spraul's recent patches (or his earlier work from
2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2).
We will converge onto a common patch in the fullness of time, but are
currently exploring different regions of the design space.  That said,
I have already gratefully stolen quite a few of Manfred's ideas.

This patch provides CONFIG_RCU_FANOUT, which controls the bushiness
of the RCU hierarchy.  Defaults to 32 on 32-bit machines and 64 on
64-bit machines.  If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT,
there is no hierarchy.  By default, the RCU initialization code will
adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA
architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable
this balancing, allowing the hierarchy to be exactly aligned to the
underlying hardware.  Up to two levels of hierarchy are permitted
(in addition to the root node), allowing up to 16,384 CPUs on 32-bit
systems and up to 262,144 CPUs on 64-bit systems.  I just know that I
am going to regret saying this, but this seems more than sufficient
for the foreseeable future.  (Some architectures might wish to set
CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs.
If this becomes a real problem, additional levels can be added, but I
doubt that it will make a significant difference on real hardware.)

In the common case, a given CPU will manipulate its private rcu_data
structure and the rcu_node structure that it shares with its immediate
neighbors.  This can reduce both lock and memory contention by multiple
orders of magnitude, which should eliminate the need for the strange
manipulations that are reported to be required when running Linux on
very large systems.

Some shortcomings:

o	More bugs will probably surface as a result of an ongoing
	line-by-line code inspection.

	Patches will be provided as required.

o	There are probably hangs, rcutorture failures, &c.  Seems
	quite stable on a 128-CPU machine, but that is kind of small
	compared to 4096 CPUs.  However, seems to do better than
	mainline.

	Patches will be provided as required.

o	The memory footprint of this version is several KB larger
	than rcuclassic.

	A separate UP-only rcutiny patch will be provided, which will
	reduce the memory footprint significantly, even compared
	to the old rcuclassic.  One such patch passes light testing,
	and has a memory footprint smaller even than rcuclassic.
	Initial reaction from various embedded guys was "it is not
	worth it", so am putting it aside.

Credits:

o	Manfred Spraul for ideas, review comments, and bugs spotted,
	as well as some good friendly competition.  ;-)

o	Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers,
	Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton
	for reviews and comments.

o	Thomas Gleixner for much-needed help with some timer issues
	(see patches below).

o	Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos,
	Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton
	Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines
	alive despite my heavy abuse^Wtesting.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 21:56:04 +01:00
Rusty Russell 968ea6d80e Merge ../linux-2.6-x86
Conflicts:

	arch/x86/kernel/io_apic.c
	kernel/sched.c
	kernel/sched_stats.h
2008-12-13 21:55:51 +10:30
Rusty Russell 98a79d6a50 cpumask: centralize cpu_online_map and cpu_possible_map
Impact: cleanup

Each SMP arch defines these themselves.  Move them to a central
location.

Twists:
1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a
   CONFIG_INIT_ALL_POSSIBLE for this rather than break them.

2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'.
   Those archs simply have phys_cpu_present_map replaced everywhere.

3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky
   so I just manipulate them both in sync.

4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map'
   declarations.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
Cc: ink@jurassic.park.msu.ru
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: tony.luck@intel.com
Cc: takata@linux-m32r.org
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: paulus@samba.org
Cc: schwidefsky@de.ibm.com
Cc: lethal@linux-sh.org
Cc: wli@holomorphy.com
Cc: davem@davemloft.net
Cc: jdike@addtoit.com
Cc: mingo@redhat.com
2008-12-13 21:19:41 +10:30
Ingo Molnar 4c59e4676d perfcounters: select ANON_INODES
The perfcounters subsystem depends on CONFIG_ANON_INODES facilities,
so make sure it's selected.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 19:38:33 +01:00
Thomas Gleixner 0793a61d4d performance counters: core code
Implement the core kernel bits of Performance Counters subsystem.

The Linux Performance Counter subsystem provides an abstraction of
performance counter hardware capabilities. It provides per task and per
CPU counters, and it provides event capabilities on top of those.

Performance counters are accessed via special file descriptors.
There's one file descriptor per virtual counter used.

The special file descriptor is opened via the perf_counter_open()
system call:

 int
 perf_counter_open(u32 hw_event_type,
                   u32 hw_event_period,
                   u32 record_type,
                   pid_t pid,
                   int cpu);

The syscall returns the new fd. The fd can be used via the normal
VFS system calls: read() can be used to read the counter, fcntl()
can be used to set the blocking mode, etc.

Multiple counters can be kept open at a time, and the counters
can be poll()ed.

See more details in Documentation/perf-counters.txt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:47:03 +01:00
Ingo Molnar 9676e73a9e Merge branches 'tracing/ftrace' and 'tracing/urgent' into tracing/core
Conflicts:
	kernel/trace/ftrace.c

[ We conflicted here because we backported a few fixes to
  tracing/urgent - which has different internal APIs. ]
2008-11-19 10:04:25 +01:00
Linus Torvalds 8c60bfb066 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpuset: fix regression when failed to generate sched domains
  sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers
  sched: fix kernel warning on /proc/sched_debug access
  sched: correct sched-rt-group.txt pathname in init/Kconfig
2008-11-18 08:06:21 -08:00
Mathieu Desnoyers c1df1bd2c4 markers: auto enable tracepoints (new API : trace_mark_tp())
Impact: new API

Add a new API trace_mark_tp(), which declares a marker within a
tracepoint probe. When the marker is activated, the tracepoint is
automatically enabled.

No branch test is used at the marker site, because it would be a
duplicate of the branch already present in the tracepoint.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 09:01:29 +01:00
Simon Arlott 02f5621042 Kconfig: SLUB is the default slab allocator
In 2007, a0acd82080 changed the default
slab allocator to SLUB, but the SLAB help text still says SLAB is the
default. This change fixes that.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-11-13 20:49:01 +02:00
Adrian Knoth 2fe401e386 sched: correct sched-rt-group.txt pathname in init/Kconfig
init/Kconfig directs the user to Documentation/sched-rt-group.txt, but
the file is actually in Documentation/scheduler/sched-rt-group.txt.

This patch corrects the pathname mentioned in init/Kconfig.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-13 09:32:29 +01:00
KAMEZAWA Hiroyuki 84ad6d7000 memcg: update menuconfig help text
page_cgroup is now allocated at boot and memmap doesn't includes pointer
for page_cgroup.  Fix the menu help text.

Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30 11:38:46 -07:00
Geert Uytterhoeven 61cfc7e442 PCI: PCI_QUIRKS depends on PCI
commit 3d13731024 ("PCI: allow quirks to be
compiled out") introduced CONFIG_PCI_QUIRKS, which now shows up in each
and every .config.  Fix this by making it depend on PCI.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:46 -07:00
Linus Torvalds a0bfb673dc Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (41 commits)
  PCI: fix pci_ioremap_bar() on s390
  PCI: fix AER capability check
  PCI: use pci_find_ext_capability everywhere
  PCI: remove #ifdef DEBUG around dev_dbg call
  PCI hotplug: fix get_##name return value problem
  PCI: document the pcie_aspm kernel parameter
  PCI: introduce an pci_ioremap(pdev, barnr) function
  powerpc/PCI: Add legacy PCI access via sysfs
  PCI: Add ability to mmap legacy_io on some platforms
  PCI: probing debug message uniformization
  PCI: support PCIe ARI capability
  PCI: centralize the capabilities code in probe.c
  PCI: centralize the capabilities code in pci-sysfs.c
  PCI: fix 64-vbit prefetchable memory resource BARs
  PCI: replace cfg space size (256/4096) by macros.
  PCI: use resource_size() everywhere.
  PCI: use same arg names in PCI_VDEVICE comment
  PCI hotplug: rpaphp: make debug var unique
  PCI: use %pF instead of print_fn_descriptor_symbol() in quirks.c
  PCI: fix hotplug get_##name return value problem
  ...
2008-10-20 13:40:47 -07:00
Linus Torvalds 92b29b86fe Merge branch 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits)
  tracing/fastboot: improve help text
  tracing/stacktrace: improve help text
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix bootgraph.pl initcall name regexp
  tracing/fastboot: fix issues and improve output of bootgraph.pl
  tracepoints: synchronize unregister static inline
  tracepoints: tracepoint_synchronize_unregister()
  ftrace: make ftrace_test_p6nop disassembler-friendly
  markers: fix synchronize marker unregister static inline
  tracing/fastboot: add better resolution to initcall debug/tracing
  trace: add build-time check to avoid overrunning hex buffer
  ftrace: fix hex output mode of ftrace
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix printk format typo in boot tracer
  ftrace: return an error when setting a nonexistent tracer
  ftrace: make some tracers reentrant
  ring-buffer: make reentrant
  ring-buffer: move page indexes into page headers
  tracing/fastboot: only trace non-module initcalls
  ftrace: move pc counter in irqtrace
  ...

Manually fix conflicts:
 - init/main.c: initcall tracing
 - kernel/module.c: verbose level vs tracepoints
 - scripts/bootgraph.pl: fallout from cherry-picking commits.
2008-10-20 13:35:07 -07:00
Thomas Petazzoni 3d13731024 PCI: allow quirks to be compiled out
This patch adds the CONFIG_PCI_QUIRKS option which allows to remove all
the PCI quirks, which are not necessarily used on embedded systems when
PCI is working properly. As this is a size-reduction option, it depends
on CONFIG_EMBEDDED. It allows to save almost 12 kilobytes of kernel
code:

   text	   data	    bss	    dec	    hex	filename
1287806	 123596	 212992	1624394	 18c94a	vmlinux.old
1275854	 123596	 212992	1612442	 189a9a	vmlinux
 -11952       0       0  -11952   -2EB0 +/-

This patch has originally been written by Zwane Mwaikambo
<zwane@arm.linux.org.uk> and is part of the Linux Tiny project.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:40 -07:00
Matt Helsley dc52ddc0e6 container freezer: implement freezer cgroup subsystem
This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:34 -07:00
Thomas Petazzoni ebf3f09c63 Configure out AIO support
This patchs adds the CONFIG_AIO option which allows to remove support
for asynchronous I/O operations, that are not necessarly used by
applications, particularly on embedded devices. As this is a
size-reduction option, it depends on CONFIG_EMBEDDED. It allows to
save ~7 kilobytes of kernel code/data:

   text	   data	    bss	    dec	    hex	filename
1115067	 119180	 217088	1451335	 162547	vmlinux
1108025	 119048	 217088	1444161	 160941	vmlinux.new
  -7042    -132       0   -7174   -1C06 +/-

This patch has been originally written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

[randy.dunlap@oracle.com: build fix]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:51 -07:00
Ingo Molnar 5f87f11218 tracing: clean up tracepoints kconfig structure
do not expose users to CONFIG_TRACEPOINTS - tracers can select it
just fine.

update ftrace to select CONFIG_TRACEPOINTS.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:33:32 +02:00
Ingo Molnar fa340d9c05 tracing: disable tracepoints by default
while it's arguably low overhead, we dont enable new features by default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:32:56 +02:00
Mathieu Desnoyers 97e1c18e8d tracing: Kernel Tracepoints
Implementation of kernel tracepoints. Inspired from the Linux Kernel
Markers. Allows complete typing verification by declaring both tracing
statement inline functions and probe registration/unregistration static
inline functions within the same macro "DEFINE_TRACE". No format string
is required. See the tracepoint Documentation and Samples patches for
usage examples.

Taken from the documentation patch :

"A tracepoint placed in code provides a hook to call a function (probe)
that you can provide at runtime. A tracepoint can be "on" (a probe is
connected to it) or "off" (no probe is attached). When a tracepoint is
"off" it has no effect, except for adding a tiny time penalty (checking
a condition for a branch) and space penalty (adding a few bytes for the
function call at the end of the instrumented function and adds a data
structure in a separate section).  When a tracepoint is "on", the
function you provide is called each time the tracepoint is executed, in
the execution context of the caller. When the function provided ends its
execution, it returns to the caller (continuing from the tracepoint
site).

You can put tracepoints at important locations in the code. They are
lightweight hooks that can pass an arbitrary number of parameters, which
prototypes are described in a tracepoint declaration placed in a header
file."

Addition and removal of tracepoints is synchronized by RCU using the
scheduler (and preempt_disable) as guarantees to find a quiescent state
(this is really RCU "classic"). The update side uses rcu_barrier_sched()
with call_rcu_sched() and the read/execute side uses
"preempt_disable()/preempt_enable()".

We make sure the previous array containing probes, which has been
scheduled for deletion by the rcu callback, is indeed freed before we
proceed to the next update. It therefore limits the rate of modification
of a single tracepoint to one update per RCU period. The objective here
is to permit fast batch add/removal of probes on _different_
tracepoints.

Changelog :
- Use #name ":" #proto as string to identify the tracepoint in the
  tracepoint table. This will make sure not type mismatch happens due to
  connexion of a probe with the wrong type to a tracepoint declared with
  the same name in a different header.
- Add tracepoint_entry_free_old.
- Change __TO_TRACE to get rid of the 'i' iterator.

Masami Hiramatsu <mhiramat@redhat.com> :
Tested on x86-64.

Performance impact of a tracepoint : same as markers, except that it
adds about 70 bytes of instructions in an unlikely branch of each
instrumented function (the for loop, the stack setup and the function
call). It currently adds a memory read, a test and a conditional branch
at the instrumentation site (in the hot path). Immediate values will
eventually change this into a load immediate, test and branch, which
removes the memory read which will make the i-cache impact smaller
(changing the memory read for a load immediate removes 3-4 bytes per
site on x86_32 (depending on mov prefixes), or 7-8 bytes on x86_64, it
also saves the d-cache hit).

About the performance impact of tracepoints (which is comparable to
markers), even without immediate values optimizations, tests done by
Hideo Aoki on ia64 show no regression. His test case was using hackbench
on a kernel where scheduler instrumentation (about 5 events in code
scheduler code) was added.

Quoting Hideo Aoki about Markers :

I evaluated overhead of kernel marker using linux-2.6-sched-fixes git
tree, which includes several markers for LTTng, using an ia64 server.

While the immediate trace mark feature isn't implemented on ia64, there
is no major performance regression. So, I think that we don't have any
issues to propose merging marker point patches into Linus's tree from
the viewpoint of performance impact.

I prepared two kernels to evaluate. The first one was compiled without
CONFIG_MARKERS. The second one was enabled CONFIG_MARKERS.

I downloaded the original hackbench from the following URL:
http://devresources.linux-foundation.org/craiger/hackbench/src/hackbench.c

I ran hackbench 5 times in each condition and calculated the average and
difference between the kernels.

    The parameter of hackbench: every 50 from 50 to 800
    The number of CPUs of the server: 2, 4, and 8

Below is the results. As you can see, major performance regression
wasn't found in any case. Even if number of processes increases,
differences between marker-enabled kernel and marker- disabled kernel
doesn't increase. Moreover, if number of CPUs increases, the differences
doesn't increase either.

Curiously, marker-enabled kernel is better than marker-disabled kernel
in more than half cases, although I guess it comes from the difference
of memory access pattern.

* 2 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      4.811   |       4.872  |  +0.061  |  +1.27  |
      100 |      9.854   |      10.309  |  +0.454  |  +4.61  |
      150 |     15.602   |      15.040  |  -0.562  |  -3.6   |
      200 |     20.489   |      20.380  |  -0.109  |  -0.53  |
      250 |     25.798   |      25.652  |  -0.146  |  -0.56  |
      300 |     31.260   |      30.797  |  -0.463  |  -1.48  |
      350 |     36.121   |      35.770  |  -0.351  |  -0.97  |
      400 |     42.288   |      42.102  |  -0.186  |  -0.44  |
      450 |     47.778   |      47.253  |  -0.526  |  -1.1   |
      500 |     51.953   |      52.278  |  +0.325  |  +0.63  |
      550 |     58.401   |      57.700  |  -0.701  |  -1.2   |
      600 |     63.334   |      63.222  |  -0.112  |  -0.18  |
      650 |     68.816   |      68.511  |  -0.306  |  -0.44  |
      700 |     74.667   |      74.088  |  -0.579  |  -0.78  |
      750 |     78.612   |      79.582  |  +0.970  |  +1.23  |
      800 |     85.431   |      85.263  |  -0.168  |  -0.2   |
--------------------------------------------------------------

* 4 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.586   |       2.584  |  -0.003  |  -0.1   |
      100 |      5.254   |       5.283  |  +0.030  |  +0.56  |
      150 |      8.012   |       8.074  |  +0.061  |  +0.76  |
      200 |     11.172   |      11.000  |  -0.172  |  -1.54  |
      250 |     13.917   |      14.036  |  +0.119  |  +0.86  |
      300 |     16.905   |      16.543  |  -0.362  |  -2.14  |
      350 |     19.901   |      20.036  |  +0.135  |  +0.68  |
      400 |     22.908   |      23.094  |  +0.186  |  +0.81  |
      450 |     26.273   |      26.101  |  -0.172  |  -0.66  |
      500 |     29.554   |      29.092  |  -0.461  |  -1.56  |
      550 |     32.377   |      32.274  |  -0.103  |  -0.32  |
      600 |     35.855   |      35.322  |  -0.533  |  -1.49  |
      650 |     39.192   |      38.388  |  -0.804  |  -2.05  |
      700 |     41.744   |      41.719  |  -0.025  |  -0.06  |
      750 |     45.016   |      44.496  |  -0.520  |  -1.16  |
      800 |     48.212   |      47.603  |  -0.609  |  -1.26  |
--------------------------------------------------------------

* 8 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.094   |       2.072  |  -0.022  |  -1.07  |
      100 |      4.162   |       4.273  |  +0.111  |  +2.66  |
      150 |      6.485   |       6.540  |  +0.055  |  +0.84  |
      200 |      8.556   |       8.478  |  -0.078  |  -0.91  |
      250 |     10.458   |      10.258  |  -0.200  |  -1.91  |
      300 |     12.425   |      12.750  |  +0.325  |  +2.62  |
      350 |     14.807   |      14.839  |  +0.032  |  +0.22  |
      400 |     16.801   |      16.959  |  +0.158  |  +0.94  |
      450 |     19.478   |      19.009  |  -0.470  |  -2.41  |
      500 |     21.296   |      21.504  |  +0.208  |  +0.98  |
      550 |     23.842   |      23.979  |  +0.137  |  +0.57  |
      600 |     26.309   |      26.111  |  -0.198  |  -0.75  |
      650 |     28.705   |      28.446  |  -0.259  |  -0.9   |
      700 |     31.233   |      31.394  |  +0.161  |  +0.52  |
      750 |     34.064   |      33.720  |  -0.344  |  -1.01  |
      800 |     36.320   |      36.114  |  -0.206  |  -0.57  |
--------------------------------------------------------------

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: 'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:28:28 +02:00
Alexey Dobriyan 53167a3ef2 proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-10 04:18:57 +04:00
Andi Kleen 9e94cd325b Move sysctl check into debugging section and don't make it default y
I noticed that sysctl_check.o was the largest object file in
a allnoconfig build in kernel/*.

  36243       0       0   36243    8d93 kernel/sysctl_check.o

This is because it was default y and && EMBEDDED. But I don't
really see a need for a non kernel developer to have their
sysctls checked all the time.

So move the Kconfig into the kernel debugging section and
also drop the default y and the EMBEDDED check.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-16 17:13:43 -07:00
Robert P. J. Day 0b0de14433 Kconfig: Extend "menuconfig" for modules to simplify Kconfig file
Given that the init/Kconfig file uses a "menuconfig" directive for
modules already, might as well wrap all the submenu entries in an "if"
to toss all those dependencies.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06 22:14:04 +02:00
jkacur 775a7229ac Kconfig/init: change help text to match default value
Change the "If unsure" message to match the default value.

Signed-off-by: John Kacur <jkacur at gmail dot com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-31 23:33:10 +02:00
Ingo Molnar cb28a1bbdb Merge branch 'linus' into core/generic-dma-coherent
Conflicts:

	arch/x86/Kconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-29 00:07:55 +02:00
Heikki Orsila 12d2b8f951 kconfig: fix typos: "Suport" -> "Support"
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:52 +02:00
S.Çağlar Onur 37a4c94074 init: fix URL of "The GNU Accounting Utilities"
Following patch corrects URL of "The GNU Accounting Utilities" in init/Kconfig.

Noticed by: Bart Van Assche" <bart.vanassche@gmail.com>

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:36 +02:00
Johannes Berg baabaae981 make CONFIG_KMOD invisible
... as preparation for removing it completely, make it an
invisible bool defaulting to yes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-22 19:24:28 +10:00
Denys Vlasenko f7f5b67557 Shrink struct module: CONFIG_UNUSED_SYMBOLS ifdefs
module.c and module.h conatains code for finding
exported symbols which are declared with EXPORT_UNUSED_SYMBOL,
and this code is compiled in even if CONFIG_UNUSED_SYMBOLS is not set
and thus there can be no EXPORT_UNUSED_SYMBOLs in modules anyway
(because EXPORT_UNUSED_SYMBOL(x) are compiled out to nothing then).

This patch adds required #ifdefs.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-22 19:24:27 +10:00
Dmitry Baryshkov ee7e5516be generic: per-device coherent dma allocator
Currently x86_32, sh and cris-v32 provide per-device coherent dma
memory allocator.

However their implementation is nearly identical. Refactor out
common code to be reused by them.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-30 12:51:05 +02:00
Sam Ravnborg 73531905ed Kconfig: introduce ARCH_DEFCONFIG to DEFCONFIG_LIST
init/Kconfig contains a list of configs that are searched
for if 'make *config' are used with no .config present.
Extend this list to look at the config identified by
ARCH_DEFCONFIG.

With this change we now try the defconfig targets last.

This fixes a regression reported
by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2008-05-25 23:03:18 +02:00
Rusty Russell 91e37a793b module: don't ignore vermagic string if module doesn't have modversions
Linus found a logic bug: we ignore the version number in a module's
vermagic string if we have CONFIG_MODVERSIONS set, but modversions
also lets through a module with no __versions section for modprobe
--force (with tainting, but still).

We should only ignore the start of the vermagic string if the module
actually *has* crcs to check.  Rather than (say) having an
entertaining hissy fit and creating a config option to work around the
buggy code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-09 07:45:18 -07:00
Stas Sergeev e5e1d3cb20 pcspkr: fix dependancies
fix pcspkr dependancies: make the pcspkr platform
drivers to depend on a platform device, and
not the other way around.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
CC: Vojtech Pavlik <vojtech@suse.cz>
CC: Michael Opdenacker <michael-lists@free-electrons.com>
[fixed for 2.6.26-rc1 by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-07 12:42:03 +02:00
Parag Warudkar aac6abca85 sched: default to n for GROUP_SCHED and FAIR_GROUP_SCHED
GROUP_SCHED is confirmed to cause unacceptable latencies, see:

   http://lkml.org/lkml/2008/5/2/370.

Mark it EXPERIMENTAL and default to no for now.

Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:18 +02:00
Ingo Molnar a5574cf65b sched, x86: add HAVE_UNSTABLE_SCHED_CLOCK
add the HAVE_UNSTABLE_SCHED_CLOCK, for architectures to select.

the next change utilizes it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:18 +02:00
Linus Torvalds 826e4506a0 Make forced module loading optional
The kernel module loader used to be much too happy to allow loading of
modules for the wrong kernel version by default.  For example, if you
had MODVERSIONS enabled, but tried to load a module with no version
info, it would happily load it and taint the kernel - whether it was
likely to actually work or not!

Generally, such forced module loading should be considered a really
really bad idea, so make it conditional on a new config option
(MODULE_FORCE_LOAD), and make it default to off.

If somebody really wants to force module loads, that's their problem,
but we should not encourage it.  Especially as it happened to me by
mistake (ie regular unversioned Fedora modules getting loaded) causing
lots of strange behavior.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-04 17:04:16 -07:00
Christoph Lameter f6acb63508 slub: #ifdef simplification
If we make SLUB_DEBUG depend on SYSFS then we can simplify some
#ifdefs and avoid others.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-05-02 00:27:13 +03:00
Holger Schurig 88f458e4b9 sysctl: allow embedded targets to disable sysctl_check.c
Disable sysctl_check.c for embedded targets. This saves about about 11 kB
in .text and another 11 kB in .data on a PXA255 embedded platform.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Balbir Singh cf475ad28a cgroups: add an owner to the mm_struct
Remove the mem_cgroup member from mm_struct and instead adds an owner.

This approach was suggested by Paul Menage.  The advantage of this approach
is that, once the mm->owner is known, using the subsystem id, the cgroup
can be determined.  It also allows several control groups that are
virtually grouped by mm_struct, to exist independent of the memory
controller i.e., without adding mem_cgroup's for each controller, to
mm_struct.

A new config option CONFIG_MM_OWNER is added and the memory resource
controller selects this config option.

This patch also adds cgroup callbacks to notify subsystems when mm->owner
changes.  The mm_cgroup_changed callback is called with the task_lock() of
the new task held and is called just prior to changing the mm->owner.

I am indebted to Paul Menage for the several reviews of this patchset and
helping me make it lighter and simpler.

This patch was tested on a powerpc box, it was compiled with both the
MM_OWNER config turned on and off.

After the thread group leader exits, it's moved to init_css_state by
cgroup_exit(), thus all future charges from runnings threads would be
redirected to the init_css_set's subsystem.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: David Rientjes <rientjes@google.com>,
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Paul Menage <menage@google.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:10 -07:00
Serge E. Hallyn 08ce5f16ee cgroups: implement device whitelist
Implement a cgroup to track and enforce open and mknod restrictions on device
files.  A device cgroup associates a device access whitelist with each cgroup.
 A whitelist entry has 4 fields.  'type' is a (all), c (char), or b (block).
'all' means it applies to all types and all major and minor numbers.  Major
and minor are either an integer or * for all.  Access is a composition of r
(read), w (write), and m (mknod).

The root device cgroup starts with rwm to 'all'.  A child devcg gets a copy of
the parent.  Admins can then remove devices from the whitelist or add new
entries.  A child cgroup can never receive a device access which is denied its
parent.  However when a device access is removed from a parent it will not
also be removed from the child(ren).

An entry is added using devices.allow, and removed using
devices.deny.  For instance

	echo 'c 1:3 mr' > /cgroups/1/devices.allow

allows cgroup 1 to read and mknod the device usually known as
/dev/null.  Doing

	echo a > /cgroups/1/devices.deny

will remove the default 'a *:* mrw' entry.

CAP_SYS_ADMIN is needed to change permissions or move another task to a new
cgroup.  A cgroup may not be granted more permissions than the cgroup's parent
has.  Any task can move itself between cgroups.  This won't be sufficient, but
we can decide the best way to adequately restrict movement later.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix may-be-used-uninitialized warning]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: James Morris <jmorris@namei.org>
Looks-good-to: Pavel Emelyanov <xemul@openvz.org>
Cc: Daniel Hokka Zakrisson <daniel@hozac.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:09 -07:00
Paul Menage 418d7d875c CGroup API files: make CGROUP_DEBUG default to off
The cgroup debug subsystem isn't generally useful for users.  It should
default to "n".

Signed-off-by: Paul Menage <menage@google.com>
Cc: "Li Zefan" <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "YAMAMOTO Takashi" <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:09 -07:00
Adrian Bunk f17a32e97e let LOG_BUF_SHIFT default to 17
16 kB is often no longer enough for a normal boot of an UP system.

And even less when people e.g. use suspend.

17 seems to be a more reasonable default for current kernels on current
hardware (it's just the default, anyone who is memory limited can still lower
it).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:01 -07:00
Linus Torvalds e945e849e1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: video drivers: add facility level
  sparc: tcx.c make tcx_init and tcx_exit static
  sparc: ffb.c make ffb_init and ffb_exit static
  sparc: cg14.c make cg14_init and cg15_exit static
  sparc: bw2.c fix bw2_exit
  sparc64: Fix accidental syscall restart on child return from clone/fork/vfork.
  sparc64: Clean up handling of pt_regs trap type encoding.
  sparc: Remove old style signal frame support.
  sparc64: Kill bogus RT_ALIGNEDSZ macro from signal.c
  sparc: sunzilog.c remove unused argument
  sparc: fix drivers/video/tcx.c warning
  sparc64: Kill unused local ISA bus layer.
  input: Rewrite sparcspkr device probing.
  sparc64: Do not ignore 'pmu' device ranges.
  sparc64: Kill ISA_FLOPPY_WORKS code.
  sparc64: Kill CONFIG_SPARC32_COMPAT
  sparc64: Cleanups and corrections for arch/sparc64/Kconfig
  sparc64: Fix wedged irq regression.
2008-04-28 09:45:57 -07:00
Ingo Molnar 96fffeb4b4 make CC_OPTIMIZE_FOR_SIZE non-experimental
this option has been the default on a wide range of distributions
for a long time - time to make it non-experimental.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:42:46 -07:00
David S. Miller 09337f501e sparc64: Kill CONFIG_SPARC32_COMPAT
It's completely superfluous, CONFIG_COMPAT is sufficient.

What this used to be is an umbrella for enabling code shared
by all 32-bit compat binary support types.  But with the
removal of SunOS and Solaris support, the only one left is
Linux 32-bit ELF.

Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-26 21:41:19 -07:00
Viktor Radnai b9b158fe1c sched: better rt-group documentation
Viktor was nice enough to enhance the document based on my replies to
his questions on the subject.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:01 +02:00
Christoph Lameter 0f389ec630 slub: No need for per node slab counters if !SLUB_DEBUG
The per node counters are used mainly for showing data through the sysfs API.
If that API is not compiled in then there is no point in keeping track of this
data. Disable counters for the number of slabs and the number of total slabs
if !SLUB_DEBUG. Incrementing the per node counters is also accessing a
potentially contended cacheline so this could actually be a performance
benefit to embedded systems.

SLABINFO support is also affected. It now must depends on SLUB_DEBUG (which
is on by default).

Patch also avoids a check for a NULL kmem_cache_node pointer in new_slab()
if the system is not compiled with NUMA support.

[penberg@cs.helsinki.fi: fix oops and move ->nr_slabs into CONFIG_SLUB_DEBUG]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:53:02 +03:00
Paul E. McKenney 21bbb39c37 rcu: move PREEMPT_RCU config option back under PREEMPT
The original preemptible-RCU patch put the choice between classic and
preemptible RCU into kernel/Kconfig.preempt, which resulted in build failures
on machines not supporting CONFIG_PREEMPT.  This choice was therefore moved to
init/Kconfig, which worked, but placed the choice between classic and
preemptible RCU at the top level, a very obtuse choice indeed.

This patch changes from the Kconfig "choice" mechanism to a pair of booleans,
only one of which (CONFIG_PREEMPT_RCU) is user-visible, and is located in
kernel/Kconfig.preempt, where one would expect it to be.  The other
(CONFIG_CLASSIC_RCU) is in init/Kconfig so that it is available to all
architectures, hopefully avoiding build breakage.  Thanks to Roman Zippel for
suggesting this approach.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Josh Triplett <josh@freedesktop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10 18:01:20 -07:00
Linus Torvalds 2c6f2db13a Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  debugfs: fix sparse warnings
  Driver core: Fix cleanup when failing device_add().
  driver core: Remove dpm_sysfs_remove() from error path of device_add()
  PM: fix new mutex-locking bug in the PM core
  PM: Do not acquire device semaphores upfront during suspend
  kobject: properly initialize ksets
  sysfs: CONFIG_SYSFS_DEPRECATED fix
  driver core: fix up Kconfig text for CONFIG_SYSFS_DEPRECATED
2008-03-04 16:37:35 -08:00
Balbir Singh 00f0b8259e Memory controller: rename to Memory Resource Controller
Rename Memory Controller to Memory Resource Controller.  Reflect the same
changes in the CONFIG definition for the Memory Resource Controller.  Group
together the config options for Resource Counters and Memory Resource
Controller.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:12 -08:00
Ingo Molnar d47846c586 sysfs: CONFIG_SYSFS_DEPRECATED fix
CONFIG_SYSFS_DEPRECATED=y changed its meaning recently and causes
regressions in working setups that had SYSFS_DEPRECATED disabled.

so rename it to SYSFS_DEPRECATED_V2 so that testers pick up the new
default via 'make oldconfig', even if their old .config's disabled
CONFIG_SYSFS_DEPRECATED ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:47:04 -08:00
Greg Kroah-Hartman 024440d2ec driver core: fix up Kconfig text for CONFIG_SYSFS_DEPRECATED
As things get moved into this config option, the hard date of 2006 does
not work anymore, so update the text to be more descriptive.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:47:04 -08:00
Andi Kleen 0835ab53ea cgroup memory controller: document huge memory/cache overhead in Kconfig
Document huge memory/cache overhead of memory controller in Kconfig

I was a little surprised that 2.6.25-rc* increased struct page for the
memory controller.  At least on many x86-64 machines it will not fit into a
single cache line now anymore and also costs considerable amounts of RAM.
At earlier review I remembered asking for a external data structure for
this.

It's also quite unobvious that a innocent looking Kconfig option with a
single line Kconfig description has such a negative effect.

This patch attempts to document these disadvantages at least so that users
configuring their kernel can make a informed decision.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:12:16 -08:00
Peter Zijlstra 052f1dc7eb sched: rt-group: make rt groups scheduling configurable
Make the rt group scheduler compile time configurable.
Keep it experimental for now.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 15:45:40 +01:00
Ingo Molnar 166124fde9 brk: help text typo fix
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Pavel Emelyanov 74bd59bb39 namespaces: cleanup the code managed with PID_NS option
Just like with the user namespaces, move the namespace management code into
the separate .c file and mark the (already existing) PID_NS option as "depend
on NAMESPACES"

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov aee16ce73c namespaces: cleanup the code managed with the USER_NS option
Make the user_namespace.o compilation depend on this option and move the
init_user_ns into user.c file to make the kernel compile and work without the
namespaces support.  This make the user namespace code be organized similar to
other namespaces'.

Also mask the USER_NS option as "depend on NAMESPACES".

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov ae5e1b22f1 namespaces: move the IPC namespace under IPC_NS option
Currently the IPC namespace management code is spread over the ipc/*.c files.
I moved this code into ipc/namespace.c file which is compiled out when needed.

The linux/ipc_namespace.h file is used to store the prototypes of the
functions in namespace.c and the stubs for NAMESPACES=n case.  This is done
so, because the stub for copy_ipc_namespace requires the knowledge of the
CLONE_NEWIPC flag, which is in sched.h.  But the linux/ipc.h file itself in
included into many many .c files via the sys.h->sem.h sequence so adding the
sched.h into it will make all these .c depend on sched.h which is not that
good.  On the other hand the knowledge about the namespaces stuff is required
in 4 .c files only.

Besides, this patch compiles out some auxiliary functions from ipc/sem.c,
msg.c and shm.c files.  It turned out that moving these functions into
namespaces.c is not that easy because they use many other calls and macros
from the original file.  Moving them would make this patch complicated.  On
the other hand all these functions can be consolidated, so I will send a
separate patch doing this a bit later.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov 58bfdd6dee namespaces: move the UTS namespace under UTS_NS option
Currently all the namespace management code is in the kernel/utsname.c file,
so just compile it out and make stubs in the appropriate header.

The init namespace itself is in init/version.c and is in the kernel all the
time.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov c5289a6949 namespaces: add the NAMESPACES config option
The option is selectable if EMBEDDED is chosen only.  When the EMBEDDED is off
namespaces will be on.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Balbir Singh 8cdea7c054 Memory controller: cgroups setup
Setup the memory cgroup and add basic hooks and controls to integrate
and work with the cgroup.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:18 -08:00
Pavel Emelianov e552b66170 Memory controller: resource counters
With fixes from David Rientjes <rientjes@google.com>

Introduce generic structures and routines for resource accounting.

Each resource accounting cgroup is supposed to aggregate it,
cgroup_subsystem_state and its resource-specific members within.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:18 -08:00
Ingo Molnar 32a932332c brk randomization: introduce CONFIG_COMPAT_BRK
based on similar patch from: Pavel Machek <pavel@ucw.cz>

Introduce CONFIG_COMPAT_BRK. If disabled then the kernel is free
(but not obliged to) randomize the brk area.

Heap randomization breaks ancient binaries, so we keep COMPAT_BRK
enabled by default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 22:39:44 +01:00
Matt Mackall 3729145821 slob: correct Kconfig description
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:19 -08:00
Matt Mackall 1e88328111 maps4: make page monitoring /proc file optional
Make /proc/ page monitoring configurable

This puts the following files under an embedded config option:

/proc/pid/clear_refs
/proc/pid/smaps
/proc/pid/pagemap
/proc/kpagecount
/proc/kpageflags

[akpm@linux-foundation.org: Kconfig fix]
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:17 -08:00