Commit Graph

399 Commits

Author SHA1 Message Date
Ronnie Sahlberg 5517554e43 cifs: Add support for writing attributes on SMB2+
This adds support for writing extended attributes on SMB2+ shares.
Attributes can be written using the setfattr command.

RH-bz: 1110709

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-09-04 14:03:45 -05:00
Steve French 2a38e12053 [SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.

For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.

In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.

Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-07-08 18:57:07 -05:00
Pavel Shilovsky 511c54a2f6 CIFS: Reconnect expired SMB sessions
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-07-08 17:23:10 -05:00
Steve French 67b4c889cc [CIFS] Minor cleanup of xattr query function
Some minor cleanup of cifs query xattr functions (will also make
SMB3 xattr implementation cleaner as well).

Signed-off-by: Steve French <steve.french@primarydata.com>
2017-05-12 20:59:10 -05:00
Rabin Vincent 3998e6b87d CIFS: fix oplock break deadlocks
When the final cifsFileInfo_put() is called from cifsiod and an oplock
break work is queued, lockdep complains loudly:

 =============================================
 [ INFO: possible recursive locking detected ]
 4.11.0+ #21 Not tainted
 ---------------------------------------------
 kworker/0:2/78 is trying to acquire lock:
  ("cifsiod"){++++.+}, at: flush_work+0x215/0x350

 but task is already holding lock:
  ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock("cifsiod");
   lock("cifsiod");

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 2 locks held by kworker/0:2/78:
  #0:  ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0
  #1:  ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0

 stack backtrace:
 CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21
 Workqueue: cifsiod cifs_writev_complete
 Call Trace:
  dump_stack+0x85/0xc2
  __lock_acquire+0x17dd/0x2260
  ? match_held_lock+0x20/0x2b0
  ? trace_hardirqs_off_caller+0x86/0x130
  ? mark_lock+0xa6/0x920
  lock_acquire+0xcc/0x260
  ? lock_acquire+0xcc/0x260
  ? flush_work+0x215/0x350
  flush_work+0x236/0x350
  ? flush_work+0x215/0x350
  ? destroy_worker+0x170/0x170
  __cancel_work_timer+0x17d/0x210
  ? ___preempt_schedule+0x16/0x18
  cancel_work_sync+0x10/0x20
  cifsFileInfo_put+0x338/0x7f0
  cifs_writedata_release+0x2a/0x40
  ? cifs_writedata_release+0x2a/0x40
  cifs_writev_complete+0x29d/0x850
  ? preempt_count_sub+0x18/0xd0
  process_one_work+0x304/0x8e0
  worker_thread+0x9b/0x6a0
  kthread+0x1b2/0x200
  ? process_one_work+0x8e0/0x8e0
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x31/0x40

This is a real warning.  Since the oplock is queued on the same
workqueue this can deadlock if there is only one worker thread active
for the workqueue (which will be the case during memory pressure when
the rescuer thread is handling it).

Furthermore, there is at least one other kind of hang possible due to
the oplock break handling if there is only worker.  (This can be
reproduced without introducing memory pressure by having passing 1 for
the max_active parameter of cifsiod.) cifs_oplock_break() can wait
indefintely in the filemap_fdatawait() while the cifs_writev_complete()
work is blocked:

 sysrq: SysRq : Show Blocked State
   task                        PC stack   pid father
 kworker/0:1     D    0    16      2 0x00000000
 Workqueue: cifsiod cifs_oplock_break
 Call Trace:
  __schedule+0x562/0xf40
  ? mark_held_locks+0x4a/0xb0
  schedule+0x57/0xe0
  io_schedule+0x21/0x50
  wait_on_page_bit+0x143/0x190
  ? add_to_page_cache_lru+0x150/0x150
  __filemap_fdatawait_range+0x134/0x190
  ? do_writepages+0x51/0x70
  filemap_fdatawait_range+0x14/0x30
  filemap_fdatawait+0x3b/0x40
  cifs_oplock_break+0x651/0x710
  ? preempt_count_sub+0x18/0xd0
  process_one_work+0x304/0x8e0
  worker_thread+0x9b/0x6a0
  kthread+0x1b2/0x200
  ? process_one_work+0x8e0/0x8e0
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x31/0x40
 dd              D    0   683    171 0x00000000
 Call Trace:
  __schedule+0x562/0xf40
  ? mark_held_locks+0x29/0xb0
  schedule+0x57/0xe0
  io_schedule+0x21/0x50
  wait_on_page_bit+0x143/0x190
  ? add_to_page_cache_lru+0x150/0x150
  __filemap_fdatawait_range+0x134/0x190
  ? do_writepages+0x51/0x70
  filemap_fdatawait_range+0x14/0x30
  filemap_fdatawait+0x3b/0x40
  filemap_write_and_wait+0x4e/0x70
  cifs_flush+0x6a/0xb0
  filp_close+0x52/0xa0
  __close_fd+0xdc/0x150
  SyS_close+0x33/0x60
  entry_SYSCALL_64_fastpath+0x1f/0xbe

 Showing all locks held in the system:
 2 locks held by kworker/0:1/16:
  #0:  ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0
  #1:  ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0

 Showing busy workqueues and worker pools:
 workqueue cifsiod: flags=0xc
   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
     in-flight: 16:cifs_oplock_break
     delayed: cifs_writev_complete, cifs_echo_request
 pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3

Fix these problems by creating a a new workqueue (with a rescuer) for
the oplock break work.

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
2017-05-03 10:10:10 -05:00
Pavel Shilovsky c610c4b619 CIFS: Add asynchronous write support through kernel AIO
This patch adds support to process write calls passed by io_submit()
asynchronously. It based on the previously introduced async context
that allows to process i/o responses in a separate thread and
return the caller immediately for asynchronous calls.

This improves writing performance of single threaded applications
with increasing of i/o queue depth size.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-05-02 14:57:34 -05:00
Pavel Shilovsky 6685c5e2d1 CIFS: Add asynchronous read support through kernel AIO
This patch adds support to process read calls passed by io_submit()
asynchronously. It based on the previously introduced async context
that allows to process i/o responses in a separate thread and
return the caller immediately for asynchronous calls.

This improves reading performance of single threaded applications
with increasing of i/o queue depth size.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-05-02 14:57:34 -05:00
Pavel Shilovsky ccf7f4088a CIFS: Add asynchronous context to support kernel AIO
Currently the code doesn't recognize asynchronous calls passed
by io_submit() and processes all calls synchronously. This is not
what kernel AIO expects. This patch introduces a new async context
that keeps track of all issued i/o requests and moves a response
collecting procedure to a separate thread. This allows to return
to a caller immediately for async calls and call iocb->ki_complete()
once all requests are completed. For sync calls the current thread
simply waits until all requests are completed.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-05-02 14:57:34 -05:00
Germano Percossi a0918f1ce6 CIFS: remove bad_network_name flag
STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.

Once the only place where it is set is removed, the remaining
bits are rendered moot.

Removing it does not prevent "mount" from failing when a non
existent share is passed.

What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.

Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-04-10 23:36:39 -05:00
Sachin Prabhu 620d8745b3 Introduce cifs_copy_file_range()
The earlier changes to copy range for cifs unintentionally disabled the more
common form of server side copy.

The patch introduces the file_operations helper cifs_copy_file_range()
which is used by the syscall copy_file_range. The new file operations
helper allows us to perform server side copies for SMB2.0 and 2.1
servers as well as SMB 3.0+ servers which do not support the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE.

The new helper uses the ioctl FSCTL_SRV_COPYCHUNK_WRITE to perform
server side copies. The helper is called by vfs_copy_file_range() only
once an attempt to clone the file using the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE has failed.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable  <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-04-07 08:04:41 -05:00
Sachin Prabhu 312bbc5946 SMB3: Rename clone_range to copychunk_range
Server side copy is one of the most important mechanisms smb2/smb3
supports and it was unintentionally disabled for most use cases.

Renaming calls to reflect the underlying smb2 ioctl called. This is
similar to the name duplicate_extents used for a similar ioctl which is
also used to duplicate files by reusing fs blocks. The name change is to
avoid confusion.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-04-07 08:04:40 -05:00
Sachin Prabhu 38bd49064a Handle mismatched open calls
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.

The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.

For this patch, the check is only done in SendReceive2()

RH-bz: 1403319

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
2017-04-07 08:04:40 -05:00
Sachin Prabhu ef65aaede2 smb2: Enforce sec= mount option
If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.

The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.

For SMB2, we also use ntlmv2 as a synonym for nltmssp.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-03-02 23:13:37 -06:00
Aurelien Aptel 7f9f6d2ec5 CIFS: let ses->ipc_tid hold smb2 TreeIds
the TreeId field went from 2 bytes in CIFS to 4 bytes in SMB2+. this
commit updates the size of the ipc_tid field of a cifs_ses, which was
still using 2 bytes.

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-03-01 22:26:11 -06:00
Pavel Shilovsky 4326ed2f6a CIFS: Decrypt and process small encrypted packets
Allow to decrypt transformed packets, find a corresponding mid
and process as usual further.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:36 -06:00
Pavel Shilovsky d70b9104b1 CIFS: Add copy into pages callback for a read operation
Since we have two different types of reads (pagecache and direct)
we need to process such responses differently after decryption of
a packet. The change allows to specify a callback that copies a read
payload data into preallocated pages.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:36 -06:00
Pavel Shilovsky 9b7c18a2d4 CIFS: Add mid handle callback
We need to process read responses differently because the data
should go directly into preallocated pages. This can be done
by specifying a mid handle callback.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:36 -06:00
Pavel Shilovsky 9bb17e0916 CIFS: Add transform header handling callbacks
We need to recognize and parse transformed packets in demultiplex
thread to find a corresponsing mid and process it further.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:36 -06:00
Pavel Shilovsky 026e93dc0a CIFS: Encrypt SMB3 requests before sending
This change allows to encrypt packets if it is required by a server
for SMB sessions or tree connections.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:36 -06:00
Pavel Shilovsky 7fb8986e74 CIFS: Add capability to transform requests before sending
This will allow us to do protocol specific tranformations of packets
before sending to the server. For SMB3 it can be used to support
encryption.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:35 -06:00
Pavel Shilovsky 738f9de5cd CIFS: Send RFC1001 length in a separate iov
In order to simplify further encryption support we need to separate
RFC1001 length and SMB2 header when sending a request. Put the length
field in iov[0] and the rest of the packet into following iovs.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:35 -06:00
Pavel Shilovsky fb2036d817 CIFS: Make send_cancel take rqst as argument
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-02-01 16:46:35 -06:00
Germano Percossi 395664439c Fix default behaviour for empty domains and add domainauto option
With commit 2b149f119 many things have been fixed/introduced.
However, the default behaviour for RawNTLMSSP authentication
seems to be wrong in case the domain is not passed on the command line.

The main points (see below) of the patch are:
 - It alignes behaviour with Windows clients
 - It fixes backward compatibility
 - It fixes UPN

I compared this behavour with the one from a Windows 10 command line
client. When no domains are specified on the command line, I traced
the packets and observed that the client does send an empty
domain to the server.
In the linux kernel case, the empty domain is replaced by the
primary domain communicated by the SMB server.
This means that, if the credentials are valid against the local server
but that server is part of a domain, then the kernel module will
ask to authenticate against that domain and we will get LOGON failure.

I compared the packet trace from the smbclient when no domain is passed
and, in that case, a default domain from the client smb.conf is taken.
Apparently, connection succeeds anyway, because when the domain passed
is not valid (in my case WORKGROUP), then the local one is tried and
authentication succeeds. I tried with any kind of invalid domain and
the result was always a connection.

So, trying to interpret what to do and picking a valid domain if none
is passed, seems the wrong thing to do.
To this end, a new option "domainauto" has been added in case the
user wants a mechanism for guessing.

Without this patch, backward compatibility also is broken.
With kernel 3.10, the default auth mechanism was NTLM.
One of our testing servers accepted NTLM and, because no
domains are passed, authentication was local.

Moving to RawNTLMSSP forced us to change our command line
to add a fake domain to pass to prevent this mechanism to kick in.

For the same reasons, UPN is broken because the domain is specified
in the username.
The SMB server will work out the domain from the UPN and authenticate
against the right server.
Without the patch, though, given the domain is empty, it gets replaced
with another domain that could be the wrong one for the authentication.

Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2016-12-15 01:42:38 -06:00
Pavel Shilovsky 96a988ffeb CIFS: Fix a possible double locking of mutex during reconnect
With the current code it is possible to lock a mutex twice when
a subsequent reconnects are triggered. On the 1st reconnect we
reconnect sessions and tcons and then persistent file handles.
If the 2nd reconnect happens during the reconnecting of persistent
file handles then the following sequence of calls is observed:

cifs_reopen_file -> SMB2_open -> small_smb2_init -> smb2_reconnect
-> cifs_reopen_persistent_file_handles -> cifs_reopen_file (again!).

So, we are trying to acquire the same cfile->fh_mutex twice which
is wrong. Fix this by moving reconnecting of persistent handles to
the delayed work (smb2_reconnect_server) and submitting this work
every time we reconnect tcon in SMB2 commands handling codepath.

This can also lead to corruption of a temporary file list in
cifs_reopen_persistent_file_handles() because we can recursively
call this function twice.

Cc: Stable <stable@vger.kernel.org> # v4.9+
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-12-05 12:52:01 -08:00
Pavel Shilovsky 53e0e11efe CIFS: Fix a possible memory corruption during reconnect
We can not unlock/lock cifs_tcp_ses_lock while walking through ses
and tcon lists because it can corrupt list iterator pointers and
a tcon structure can be released if we don't hold an extra reference.
Fix it by moving a reconnect process to a separate delayed work
and acquiring a reference to every tcon that needs to be reconnected.
Also do not send an echo request on newly established connections.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-12-05 12:08:33 -08:00
Steve French 8b217fe7fc SMB3: parsing for new snapshot timestamp mount parm
New mount option "snapshot=<time>" to allow mounting an earlier
version of the remote volume (if such a snapshot exists on
the server).

Note that eventually specifying a snapshot time of 1 will allow
the user to mount the oldest snapshot. A subsequent patch
add the processing for that and another for actually specifying
the "time warp" create context on SMB2/SMB3 open.

Check to make sure SMB2 negotiated, and ensure that
we use a different tcon if mount same share twice
but with different snaphshot times

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-12-01 00:23:20 -06:00
Steve French 9593265531 CIFS: Add new mount option to set owner uid and gid from special sids in acl
Add "idsfromsid" mount option to indicate to cifs.ko that it should
try to retrieve the uid and gid owner fields from special sids in the
ACL if present.  This first patch just adds the parsing for the mount
option.

Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by:  Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-10-14 14:22:01 -05:00
Pavel Shilovsky f2cca6a7c9 CIFS: Fix persistent handles re-opening on reconnect
openFileList of tcon can be changed while cifs_reopen_file() is called
that can lead to an unexpected behavior when we return to the loop.
Fix this by introducing a temp list for keeping all file handles that
need to be reopen.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2016-10-13 19:48:55 -05:00
Steve French 834170c859 Enable previous version support
Add ioctl to query previous versions of file

Allows listing snapshots on files on SMB3 mounts.

Signed-off-by: Steve French <smfrench@gmail.com>
2016-10-13 19:48:11 -05:00
Steve French 141891f472 SMB3: Add mount parameter to allow user to override max credits
Add mount option "max_credits" to allow setting maximum SMB3
credits to any value from 10 to 64000 (default is 32000).
This can be useful to workaround servers with problems allocating
credits, or to throttle the client to use smaller amount of
simultaneous i/o or to workaround server performance issues.

Also adds a cap, so that even if the server granted us more than
65000 credits due to a server bug, we would not use that many.

Signed-off-by: Steve French <steve.french@primarydata.com>
2016-10-12 12:08:33 -05:00
Steve French 3afca265b5 Clarify locking of cifs file and tcon structures and make more granular
Remove the global file_list_lock to simplify cifs/smb3 locking and
have spinlocks that more closely match the information they are
protecting.

Add new tcon->open_file_lock and file->file_info_lock spinlocks.
Locks continue to follow a heirachy,
	cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file
where global tcp_ses_lock still protects socket and cifs_ses, while the
the newer locks protect the lower level structure's information
(tcon and cifs_file respectively).

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Germano Percossi <germano.percossi@citrix.com>
2016-10-12 12:08:32 -05:00
Jeff Layton 3d22462ae9 cifs: stuff the fl_owner into "pid" field in the lock request
Right now, we send the tgid cross the wire. What we really want to send
though is a hashed fl_owner_t since samba treats this field as a generic
lockowner.

It turns out that because we enforce and release locks locally before
they are ever sent to the server, this patch makes no difference in
behavior. Still, setting OFD locks on the server using the process
pid seems wrong, so I think this patch still makes sense.

Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
2016-06-23 23:44:44 -05:00
Linus Torvalds 442c9ac989 Merge branch 'sendmsg.cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull cifs iovec cleanups from Al Viro.

* 'sendmsg.cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cifs: don't bother with kmap on read_pages side
  cifs_readv_receive: use cifs_read_from_socket()
  cifs: no need to wank with copying and advancing iovec on recvmsg side either
  cifs: quit playing games with draining iovecs
  cifs: merge the hash calculation helpers
2016-05-18 10:17:56 -07:00
Kirill A. Shutemov ea1754a084 mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
Mostly direct substitution with occasional adjustment or removing
outdated comments.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Al Viro 09aab880f7 cifs: no need to wank with copying and advancing iovec on recvmsg side either
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 14:05:37 -04:00
Kees Cook 1404297ebf lib: update single-char callers of strtobool()
Some callers of strtobool() were passing a pointer to unterminated
strings.  In preparation of adding multi-character processing to
kstrtobool(), update the callers to not pass single-character pointers,
and switch to using the new kstrtobool_from_user() helper where
possible.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Steve French <sfrench@samba.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Steve French 373512ec5c Prepare for encryption support (first part). Add decryption and encryption key generation. Thanks to Metze for helping with this.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
2016-01-14 14:29:42 -06:00
Steve French adfeb3e00e cifs: Make echo interval tunable
Currently the echo interval is set to 60 seconds using a macro. This
setting determines the interval at which echo requests are sent to the
server on an idling connection. This setting also affects the time
required for a connection to an unresponsive server to timeout.

Making this setting a tunable allows users to control the echo interval
times as well as control the time after which the connecting to an
unresponsive server times out.

To set echo interval, pass the echo_interval=n mount option.

Version four of the patch.
v2: Change MIN and MAX timeout values
v3: Remove incorrect comment in cifs_get_tcp_session
v4: Fix bug in setting echo_intervalw

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
2016-01-14 13:39:15 -06:00
Steve French 592fafe644 Add resilienthandles mount parm
Since many servers (Windows clients, and non-clustered servers) do not
support persistent handles but do support resilient handles, allow
the user to specify a mount option "resilienthandles" in order
to get more reliable connections and less chance of data loss
(at least when SMB2.1 or later).  Default resilient handle
timeout (120 seconds to recent Windows server) is used.

Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
2015-11-03 10:10:36 -06:00
Steve French b56eae4df9 [SMB3] Send durable handle v2 contexts when use of persistent handles required
Version 2 of the patch. Thanks to Dan Carpenter and the smatch
tool for finding a problem in the first version of this patch.

CC: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
2015-11-03 09:26:27 -06:00
Steve French b618f001a2 [SMB3] Enable checking for continuous availability and persistent handle support
Validate "persistenthandles" and "nopersistenthandles" mount options against
the support the server claims in negotiate and tree connect SMB3 responses.

Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
2015-11-03 09:15:03 -06:00
Steve French b2a3077414 [SMB3] Add parsing for new mount option controlling persistent handles
"nopersistenthandles" and "persistenthandles" mount options added.
The former will not request persistent handles on open even when
SMB3 negotiated and Continuous Availability share.  The latter
will request persistent handles (as long as server notes the
capability in protocol negotiation) even if share is not Continuous
Availability share.

Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
2015-11-03 09:03:18 -06:00
Steve French b3152e2c7a Add ioctl to set integrity
set integrity increases reliability of files stored on SMB3 servers.
Add ioctl to allow setting this on files on SMB3 and later mounts.

Signed-off-by: Steve French <steve.french@primarydata.com>
2015-06-28 21:15:45 -05:00
Steve French 02b1666544 Add reflink copy over SMB3.11 with new FSCTL_DUPLICATE_EXTENTS
Getting fantastic copy performance with cp --reflink over SMB3.11
 using the new FSCTL_DUPLICATE_EXTENTS.

 This FSCTL was added in the SMB3.11 dialect (testing was
 against REFS file system) so have put it as a 3.11 protocol
 specific operation ("vers=3.1.1" on the mount).  Tested at
 the SMB3 plugfest in Redmond.

 It depends on the new FS Attribute (BLOCK_REFCOUNTING) which
 is used to advertise support for the ability to do this ioctl
 (if you can support multiple files pointing to the same block
 than this refcounting ability or equivalent is needed to
 support the new reflink-like duplicate extent SMB3 ioctl.

Signed-off-by: Steve French <steve.french@primarydata.com>
2015-06-28 21:15:38 -05:00
Steve French aab1893d5f Add SMB3.11 mount option synonym for new dialect
Most people think of SMB 3.1.1 as SMB version 3.11 so add synonym
for "vers=3.1.1" of "vers=3.11" on mount.

Also make sure that unlike SMB3.0 and 3.02 we don't send
validate negotiate on mount (it is handled by negotiate contexts) -
add list of SMB3.11 specific functions (distinct from 3.0 dialect).

Signed-off-by: Steve French <steve.french@primarydata.com>w
2015-06-27 20:28:11 -07:00
Steve French 5f7fbf733c Allow parsing vers=3.11 on cifs mount
Parses and recognizes "vers=3.1.1" on cifs mount and allows sending
0x0311 as a new CIFS/SMB3 dialect. Subsequent patches will add
the new negotiate contexts and updated session setup

Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
2015-06-27 20:23:32 -07:00
Sachin Prabhu 9235d09873 Convert MessageID in smb2_hdr to LE
We have encountered failures when When testing smb2 mounts on ppc64
machines when using both Samba as well as Windows 2012.

On poking around, the problem was determined to be caused by the
high endian MessageID passed in the header for smb2. On checking the
corresponding MID for smb1 is converted to LE before being sent on the
wire.

We have tested this patch successfully on a ppc64 machine.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
2014-12-14 14:55:45 -06:00
Al Viro 7119e220a7 cifs: get rid of ->f_path.dentry->d_sb uses, add a new helper
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:22 -05:00
Steve French 2baa268253 Remap reserved posix characters by default (part 3/3)
This is a bigger patch, but its size is mostly due to
a single change for how we check for remapping illegal characters
in file names - a lot of repeated, small changes to
the way callers request converting file names.

The final patch in the series does the following:

1) changes default behavior for cifs to be more intuitive.
Currently we do not map by default to seven reserved characters,
ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows,
unless a mount option (mapchars) is specified.  Change this
to by default always map and map using the SFM maping
(like the Mac uses) unless the server negotiates the CIFS Unix
Extensions (like Samba does when mounting with the cifs protocol)
when the remapping of the characters is unnecessary.  This should
help SMB3 mounts in particular since Samba will likely be
able to implement this mapping with its new "vfs_fruit" module
as it will be doing for the Mac.
2) if the user specifies the existing "mapchars" mount option then
use the "SFU" (Microsoft Services for Unix, SUA) style mapping of
the seven characters instead.
3) if the user specifies "nomapposix" then disable SFM/MAC style mapping
(so no character remapping would be used unless the user specifies
"mapchars" on mount as well, as above).
4) change all the places in the code that check for the superblock
flag on the mount which is set by mapchars and passed in on all
path based operation and change it to use a small function call
instead to set the mapping type properly (and check for the
mapping type in the cifs unicode functions)

Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16 15:20:20 -05:00
Steve French db8b631d4b Allow mknod and mkfifo on SMB2/SMB3 mounts
The "sfu" mount option did not work on SMB2/SMB3 mounts.
With these changes when the "sfu" mount option is passed in
on an smb2/smb2.1/smb3 mount the client can emulate (and
recognize) fifo and device (character and device files).

In addition the "sfu" mount option should not conflict
with "mfsymlinks" (symlink emulation) as we will never
create "sfu" style symlinks, but using "sfu" mount option
will allow us to recognize existing symlinks, created with
Microsoft "Services for Unix" (SFU and SUA).

To enable the "sfu" mount option for SMB2/SMB3 the calling
syntax of the generic cifs/smb2/smb3 sync_read and sync_write
protocol dependent function needed to be changed (we
don't have a file struct in all cases), but this actually
ended up simplifying the code a little.

Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16 15:20:19 -05:00