Commit Graph

1816 Commits

Author SHA1 Message Date
Nicolas Ferre 655ab0bc46 power: reset: at91-reset: add support for sam9x60 SoC
Add support for additional reset causes and the proper compatibility
string for sam9x60 SoC. The restart function is the same as the samx7.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-02-20 00:41:01 +01:00
Sven Van Asbroeck bf592c56b1 max17042_battery: fix potential use-after-free on device remove
The work which is scheduled on a POR boot is potentially left
pending or running until after the device module is removed,
which could result in a use-after-free.

Fix by registering a cancel/sync callback, which gets executed as
part of standard resource unwinding.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-02-20 00:36:52 +01:00
Artur Rojek 04fb53101e power: supply: core: Add a field to support battery max voltage
Add a field for "voltage_max_design_uv" to present fully charged
battery voltage.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-02-20 00:33:08 +01:00
Arthur Demchenkov 9b2c945f9f bq27x00: use cached flags
The flags were just read by bq27xxx_battery_update(),
no need to read them again.

Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-02-20 00:26:38 +01:00
Sven Van Asbroeck 74f0aaba7c power: supply: ds2782: fix possible use-after-free on remove
In remove(), use cancel_delayed_work_sync() to cancel the
delayed work. Otherwise there's a chance that this work
will continue to run until after the device has been removed.

While we're here, fix the deallocation order in remove(),
to correspond to the inverse of the probe() allocation
order. This guarantees that any remaining work can run
to completion with all driver structures still intact.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-02-12 23:27:16 +01:00
Michał Mirosław f83a6ece69 power: supply: bq25890: show max charge current/voltage as configured
Use firmware-provided limits for POWER_SUPPLY_*_MAX properties instead
of chip max values. This will reflect the battery limits as those are
the important ones.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23 22:29:45 +01:00
Yuanjiang Yu d3e67c94e8 power: supply: sc27xx: Fix capacity saving function
We found sometimes we can not get the saving capacity to initialize the
battery capacity, the reason is the user area registers are put on power
always-on region, so we need delay some time to wait until values are
updated successfully.

Moreover we also should clear the USER_AREA_CLEAR register after setting
the USER_AREA_SET register, otherwise we can not save the values in the
USER_AREA_SET register.

Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23 21:26:56 +01:00
Baolin Wang 3a28f203c5 power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
We should multiply the calibrated current data (cur_1000ma_adc) when
converting current capacity (mAh) to coulomb counter, which can get
an accurate coulomb counter from the fuel gauge controller.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23 21:26:56 +01:00
Baolin Wang 0a4f97a171 power: supply: sc27xx: Add one property to read charge voltage
Add POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE property to get charge
voltage sampling by ADC controller, which is used to validate if the
charge voltage is in normal range or not in charger manager.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23 21:26:56 +01:00
Roman Kiryanov 2a7b0a29b3 drivers: power: supply: goldfish_battery: Add support for reading more properties
To comply with tests we need to support more power supply properties:

POWER_SUPPLY_PROP_VOLTAGE_NOW
POWER_SUPPLY_PROP_TEMP
POWER_SUPPLY_PROP_CHARGE_COUNTER
POWER_SUPPLY_PROP_CURRENT_NOW
POWER_SUPPLY_PROP_CURRENT_AVG
POWER_SUPPLY_PROP_CHARGE_FULL
POWER_SUPPLY_PROP_CYCLE_COUNT
POWER_SUPPLY_PROP_VOLTAGE_MAX
POWER_SUPPLY_PROP_CURRENT_MAX

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-21 22:31:27 +01:00
Krzysztof Kozlowski 02276af2fc power: supply: charger-manager: Fix trivial language typos
Fix few trivial language typos.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:45:08 +01:00
Pavel Machek fd10606f93 cpcap-charger: generate events for userspace
The driver doesn't generate uevents on charger connect/disconnect.
This leads to UPower not detecting when AC is on or off... and that is
bad.

Reported by Arthur D. on github (
https://github.com/maemo-leste/bugtracker/issues/206 ), thanks to
Merlijn Wajer for suggesting a fix.

Cc: stable@kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:40:27 +01:00
Yangtao Li 19836a1b8e power: supply: remove some duplicated includes
We include of.h twice. It's unnecessary,so
just remove them.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:39:23 +01:00
Kangjie Lu 6f12e46eeb power: twl4030: fix a missing check of return value
If twl4030_bci_read() fails, the read data in "s" is incorrect,
which is however used in the following execution. The fix checks
the return value of twl4030_bci_read() and returns an error code
upstream upon the failure of twl4030_bci_read().

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:38:35 +01:00
Roman Kiryanov 3dcdb68925 drivers: power: supply: goldfish_battery: Use tabs for alignment
Tabs are preferred.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:29:54 +01:00
Roman Kiryanov 617ee863ed drivers: power: supply: goldfish_battery: Fix alignment
Align two values as other values below.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:29:36 +01:00
Roman Kiryanov 5fbde356cb drivers: power: supply: goldfish_battery: Retire a redundant variable
The battery_data static variable was not used.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:29:22 +01:00
Roman Kiryanov 65ab18a1aa drivers: power: supply: goldfish_battery: Fix "line over 80 characters"
There was a line longer than 80 characters.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:28:54 +01:00
Roman Kiryanov e75e3a125b drivers: power: supply: goldfish_battery: Put an SPDX tag
There was a checkpatch complain:

"Missing or malformed SPDX-License-Identifier tag".

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:28:10 +01:00
Yangtao Li 0367e23425 power: supply: axp288_fuel_gauge: Change to use DEFINE_SHOW_ATTRIBUTE macro
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 22:21:45 +01:00
Sebastian Reichel f5d782d46a power: supply: isp1704: switch to gpiod API
This migrates isp1704 driver from old GPIO API to new descriptor
based GPIO API and drops useless platform data as a side-effect.

Migration is simple, since all mainline users are DT based and
DT API does not change. Out of tree users of the platform data
need to migrate to gpiod_lookup_table as described here:

Documentation/driver-api/gpio/board.rst

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-20 21:57:43 +01:00
Linus Torvalds 579a700359 power supply and reset changes for the v4.21 series
* New core support
  - battery internal resistance
  - battery OCV capacity lookup table
  - support for custom sysfs attributes
 * Convert all drivers to use power-supply core support for custom sysfs attributes
 * bq24190-charger: bq24196 support
 * axp20x-charger: AXP813 support
 * sc27xx-battery: new fuel gauge driver
 * gpio-poweroff: support for specific active and inactive delays
 * Misc fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlwlThQACgkQ2O7X88g7
 +pqmHg/+PPPeJVIfAAdxFe4KPvP/sAUnAGxqgJc7yeaKOq03eIWnm0JFbEsQLazM
 XDyk+8N7PQ254n2hU/DQln/OKrkVMo/QaOsn3HbbxaDbUiM5Mj8WjKOzgjWtgUy0
 OZOEk6n4SQNx6Ib7Wp/e+H6b/K+EglO5CVZDXmTBJfFKiKp5g4A3ZaUe8bCa1xuG
 4AB3QWQPomtI8o/nD37c4lpegojabUGN8hHI6r9TFT1PaYEzAmOQsb0NnGqEKAUw
 ECPBeH4jVoLN9Bie4u5Fgdr0lqukG+EAEHlHhPRea92oDLFfXEjPOI9JDM4XWBg/
 P47KNuvsVrIAUQ3rnCHUP4aC2ElL0G9bcEyADiLOuw9FIjMMjBm65pyRDORwkH+L
 TAu/28fL2Rzwenk+N8OLZ5lpvYlrqpDFISJkwO7gSGq4wyNW8I62GXJPFAYuSZsf
 dvlEOTgUCwNUnnF2ehx1AkvOBE+eh1CHvtcbKUMLwtBgWOhVi664Gm2znaLy6PwN
 XPkcRCNFIr/FZRuAo1x9GyxYv483Nk+27LcKfwz+HtmHHMRRDHDWtJ/K0KqK/y7a
 7HE7tBhCMpWikIXT1pAz7A0XYlMqfaMsyHlOqmeFgsNUBuDvJAArDz3Gff935PL3
 KGIr4lp+YeTHv6nJT/EMtGIG2dsJZUHh/NAtWZ07usI2fOgE3J4=
 =59iw
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - New core support:
    - battery internal resistance
    - battery OCV capacity lookup table
    - support for custom sysfs attributes

 - Convert all drivers to use power-supply core support for custom sysfs
   attributes

 - bq24190-charger: bq24196 support

 - axp20x-charger: AXP813 support

 - sc27xx-battery: new fuel gauge driver

 - gpio-poweroff: support for specific active and inactive delays

 - Misc fixes

* tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (53 commits)
  power: supply: bq25890: fix BAT_COMP field definition
  power: supply: gpio-charger: Do not use deprecated POWER_SUPPLY_TYPE_USB_*
  power: supply: ds2781: switch to devm_power_supply_register
  power: supply: ds2780: switch to devm_power_supply_register
  power: supply: ds2781: fix race-condition in bin attribute registration
  power: supply: ds2780: fix race-condition in bin attribute registration
  power: supply: pcf50633: fix race-condition in sysfs registration
  power: supply: charger-manager: fix race-condition in sysfs registration
  power: supply: charger-manager: simplify generation of sysfs attribute group name
  power: supply: bq24257: fix race-condition in sysfs registration
  power: supply: bq24190_charger: fix race-condition in sysfs registration
  power: supply: lp8788: fix race-condition in sysfs registration
  power: supply: ds2781: fix race-condition in sysfs registration
  power: supply: ds2780: fix race-condition in sysfs registration
  power: supply: bq2415x: fix race-condition in sysfs registration
  power: supply: core: add support for custom sysfs attributes
  power: supply: sc27xx: Save last battery capacity
  power: reset: at91-poweroff: move shdwc related data to one structure
  power: supply: sc27xx: Add suspend/resume interfaces
  power: supply: sc27xx: Add fuel gauge low voltage alarm
  ...
2018-12-28 20:22:45 -08:00
Linus Torvalds 030672aea8 Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...
2018-12-28 20:08:34 -08:00
Michał Mirosław 9580913966 power: supply: bq25890: fix BAT_COMP field definition
According to datasheet, BAT_COMP field spans bits 5-7. The rest of the
code seems to assume this already.

Fixes: 4aeae9cb0d ("power_supply: Add support for TI BQ25890 charger chip")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-18 00:21:16 +01:00
Sebastian Reichel fb4d494480 power: supply: gpio-charger: Do not use deprecated POWER_SUPPLY_TYPE_USB_*
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:17:01 +01:00
Sebastian Reichel fbd17e58d4 power: supply: ds2781: switch to devm_power_supply_register
Simplify/Cleanup the driver by switching to devm_power_supply_register
and dropping the driver's remove function.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:56 +01:00
Sebastian Reichel 63fac6cb63 power: supply: ds2780: switch to devm_power_supply_register
Simplify/Cleanup the driver by switching to devm_power_supply_register
and dropping the driver's remove function.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:47 +01:00
Sebastian Reichel 711aebcfe3 power: supply: ds2781: fix race-condition in bin attribute registration
This is a follow-up patch to the previous one, which fixed a
race-condition during registration of the attribute group.
This fixes the same issue for the binary attributes by adding
them to the properly registered group. As a side effect the
code is further cleaned up.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:39 +01:00
Sebastian Reichel 88635b6da8 power: supply: ds2780: fix race-condition in bin attribute registration
This is a follow-up patch to the previous one, which fixed a
race-condition during registration of the attribute group.
This fixes the same issue for the binary attributes by adding
them to the properly registered group. As a side effect the
code is further cleaned up.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:31 +01:00
Sebastian Reichel 451ba0e436 power: supply: pcf50633: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:24 +01:00
Sebastian Reichel 157ba1bb5f power: supply: charger-manager: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:20 +01:00
Sebastian Reichel efcca6bdfb power: supply: charger-manager: simplify generation of sysfs attribute group name
This is a simple cleanup and there should be no functional changes.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:16 +01:00
Sebastian Reichel 750688c7cd power: supply: bq24257: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:12 +01:00
Sebastian Reichel 348a3c079b power: supply: bq24190_charger: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:08 +01:00
Sebastian Reichel b1f7ee898b power: supply: lp8788: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:16:02 +01:00
Sebastian Reichel a45cefb0ca power: supply: ds2781: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:15:47 +01:00
Sebastian Reichel b10474aafe power: supply: ds2780: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:15:42 +01:00
Sebastian Reichel 06215ce999 power: supply: bq2415x: fix race-condition in sysfs registration
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:15:21 +01:00
Sebastian Reichel cef8fe6a38 power: supply: core: add support for custom sysfs attributes
Add functionality to setup device specific sysfs attributes
in a race condition free manner

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-13 00:15:06 +01:00
Nishanth Menon f9dca0f067 PM / AVS: SmartReflex: Switch to SPDX Licence ID
Fix up licensing to be inline with Linux conventions.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-12 13:54:28 +01:00
Thomas Meyer 14d338a857 PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
NULL check before some freeing functions is not needed.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-12 13:54:05 +01:00
Rafael J. Wysocki c76aa32207 Merge back staging AVS changes for v4.21. 2018-12-11 12:02:46 +01:00
Yuanjiang Yu 4a040e7c72 power: supply: sc27xx: Save last battery capacity
Our charger manager can optimize the battery capacity periodically, so
we can save last battery capacity into registers. Then next system
power-on, we can read the last saved battery capacity as the initial
battery capacity, which can make the battery capacity more accurate.

Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06 22:24:39 +01:00
Claudiu Beznea caa6e150f8 power: reset: at91-poweroff: move shdwc related data to one structure
Move SHDWC realted data to only one structure to have them grouped.
Inspired from commit 9be74f0d39 ("power: reset: at91-poweroff: make
mpddrc_base part of struct shdwc").

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06 21:56:37 +01:00
Yuanjiang Yu e2fb615b69 power: supply: sc27xx: Add suspend/resume interfaces
Add fuel gauge platform suspend and resume interfaces. In suspend state,
we should enable the low voltage and coulomb counter threshold interrupts
to wake up system to calibrate the battery capacity in lower voltage stage.

Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06 01:04:30 +01:00
Yuanjiang Yu edcb1c0a3f power: supply: sc27xx: Add fuel gauge low voltage alarm
Add low voltage alarm support to make sure the battery capacity
more accurate in lower voltage stage.

Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06 01:04:30 +01:00
Baolin Wang 65c9fab7bc power: supply: sc27xx: Add fuel gauge calibration
This patch adds support to read calibration values from the eFuse controller
to calibrate the ADC values corresponding to current and voltage, which can
make the current and voltage data more accurate.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06 00:54:22 +01:00
Baolin Wang 872bcf83ec power: supply: sc2731_charger: Free battery information
Free battery information in case of adding battery OCV tables.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-05 23:54:01 +01:00
Baolin Wang a8aaff6be0 power: supply: sc2731_charger: Avoid repeated charge/discharge
Add info->charging validation to avoid repeated charge or discharge
operation.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-05 23:53:14 +01:00
Baolin Wang 18c807dbf9 power: supply: sc2731_charger: Add charger status detection
The USB charger status can be notified before the charger driver registers
the USB phy notifier, so we should check the charger status in probe() in
case we missed the USB charger notification.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-05 23:51:58 +01:00