Commit Graph

3564 Commits

Author SHA1 Message Date
Linus Torvalds
3370b69eb0 Four changes:
- x86: work around two nasty cases where a benign exception occurs while
 another is being delivered.  The endless stream of exceptions causes an
 infinite loop in the processor, which not even NMIs or SMIs can interrupt;
 in the virt case, there is no possibility to exit to the host either.
 
 - x86: support for Skylake per-guest TSC rate.  Long supported by AMD,
 the patches mostly move things from there to common arch/x86/kvm/ code.
 
 - generic: remove local_irq_save/restore from the guest entry and exit
 paths when context tracking is enabled.  The patches are a few months
 old, but we discussed them again at kernel summit.  Andy will pick up
 from here and, in 4.5, try to remove it from the user entry/exit paths.
 
 - PPC: Two bug fixes, see merge commit 370289756b for details.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJWRFb0AAoJEL/70l94x66DjjMH/31jr8d119MW0uv2x+03+wRq
 6dbJ8tjQ8grvBRExKvLsUVjDmHlhCa1BQl5qjCsyYhX9UeAf4NQOmoEFpq+YTLxh
 Ctveyn+yiZWC7qxbQDmauiQ4JCOp+W9ial782iqw5+ouQMajGOffq5WrojCa2ZNF
 jI278JgdHJLrKj/uie//WBu3V7MJY5Apc3p4zatnSYFSQ3MA0sxl4r4zIrwOa5qs
 23ZeeoqbP4sHh4X5wL/30Y6XFSCHj0qoYHHyAgzLi0PCMvBdt4DrAFUPDG/Rhlv6
 o1WB/kcUfcz3DtBX85wfSOMuw0nF6patWhWv07R/3EIbYoz3dKvp9d6ORYgXqlY=
 =Um9M
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second batch of kvm updates from Paolo Bonzini:
 "Four changes:

   - x86: work around two nasty cases where a benign exception occurs
     while another is being delivered.  The endless stream of exceptions
     causes an infinite loop in the processor, which not even NMIs or
     SMIs can interrupt; in the virt case, there is no possibility to
     exit to the host either.

   - x86: support for Skylake per-guest TSC rate.  Long supported by
     AMD, the patches mostly move things from there to common
     arch/x86/kvm/ code.

   - generic: remove local_irq_save/restore from the guest entry and
     exit paths when context tracking is enabled.  The patches are a few
     months old, but we discussed them again at kernel summit.  Andy
     will pick up from here and, in 4.5, try to remove it from the user
     entry/exit paths.

   - PPC: Two bug fixes, see merge commit 370289756b for details"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: x86: rename update_db_bp_intercept to update_bp_intercept
  KVM: svm: unconditionally intercept #DB
  KVM: x86: work around infinite loop in microcode when #AC is delivered
  context_tracking: avoid irq_save/irq_restore on guest entry and exit
  context_tracking: remove duplicate enabled check
  KVM: VMX: Dump TSC multiplier in dump_vmcs()
  KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSC
  KVM: VMX: Setup TSC scaling ratio when a vcpu is loaded
  KVM: VMX: Enable and initialize VMX TSC scaling
  KVM: x86: Use the correct vcpu's TSC rate to compute time scale
  KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc()
  KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset()
  KVM: x86: Replace call-back compute_tsc_offset() with a common function
  KVM: x86: Replace call-back set_tsc_khz() with a common function
  KVM: x86: Add a common TSC scaling function
  KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_arch
  KVM: x86: Collect information for setting TSC scaling ratio
  KVM: x86: declare a few variables as __read_mostly
  KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_common
  KVM: PPC: Book3S HV: Don't dynamically split core when already split
  ...
2015-11-12 14:34:06 -08:00
Paolo Bonzini
a96036b8ef KVM: x86: rename update_db_bp_intercept to update_bp_intercept
Because #DB is now intercepted unconditionally, this callback
only operates on #BP for both VMX and SVM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:25 +01:00
Paolo Bonzini
cbdb967af3 KVM: svm: unconditionally intercept #DB
This is needed to avoid the possibility that the guest triggers
an infinite stream of #DB exceptions (CVE-2015-8104).

VMX is not affected: because it does not save DR6 in the VMCS,
it already intercepts #DB unconditionally.

Reported-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:24 +01:00
Eric Northup
54a20552e1 KVM: x86: work around infinite loop in microcode when #AC is delivered
It was found that a guest can DoS a host by triggering an infinite
stream of "alignment check" (#AC) exceptions.  This causes the
microcode to enter an infinite loop where the core never receives
another interrupt.  The host kernel panics pretty quickly due to the
effects (CVE-2015-5307).

Signed-off-by: Eric Northup <digitaleric@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:24 +01:00
Haozhong Zhang
8cfe986696 KVM: VMX: Dump TSC multiplier in dump_vmcs()
This patch enhances dump_vmcs() to dump the value of TSC multiplier
field in VMCS.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:22 +01:00
Haozhong Zhang
be7b263ea9 KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSC
This patch makes kvm-intel to return a scaled host TSC plus the TSC
offset when handling guest readings to MSR_IA32_TSC.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:21 +01:00
Haozhong Zhang
ff2c3a1803 KVM: VMX: Setup TSC scaling ratio when a vcpu is loaded
This patch makes kvm-intel module to load TSC scaling ratio into TSC
multiplier field of VMCS when a vcpu is loaded, so that TSC scaling
ratio can take effect if VMX TSC scaling is enabled.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:20 +01:00
Haozhong Zhang
64903d6195 KVM: VMX: Enable and initialize VMX TSC scaling
This patch exhances kvm-intel module to enable VMX TSC scaling and
collects information of TSC scaling ratio during initialization.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:19 +01:00
Haozhong Zhang
27cca94e03 KVM: x86: Use the correct vcpu's TSC rate to compute time scale
This patch makes KVM use virtual_tsc_khz rather than the host TSC rate
as vcpu's TSC rate to compute the time scale if TSC scaling is enabled.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:18 +01:00
Haozhong Zhang
4ba76538dd KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc()
Both VMX and SVM scales the host TSC in the same way in call-back
read_l1_tsc(), so this patch moves the scaling logic from call-back
read_l1_tsc() to a common function kvm_read_l1_tsc().

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:18 +01:00
Haozhong Zhang
58ea676787 KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset()
For both VMX and SVM, if the 2nd argument of call-back
adjust_tsc_offset() is the host TSC, then adjust_tsc_offset() will scale
it first. This patch moves this common TSC scaling logic to its caller
adjust_tsc_offset_host() and rename the call-back adjust_tsc_offset() to
adjust_tsc_offset_guest().

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:17 +01:00
Haozhong Zhang
07c1419a32 KVM: x86: Replace call-back compute_tsc_offset() with a common function
Both VMX and SVM calculate the tsc-offset in the same way, so this
patch removes the call-back compute_tsc_offset() and replaces it with a
common function kvm_compute_tsc_offset().

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:16 +01:00
Haozhong Zhang
381d585c80 KVM: x86: Replace call-back set_tsc_khz() with a common function
Both VMX and SVM propagate virtual_tsc_khz in the same way, so this
patch removes the call-back set_tsc_khz() and replaces it with a common
function.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:16 +01:00
Haozhong Zhang
35181e86df KVM: x86: Add a common TSC scaling function
VMX and SVM calculate the TSC scaling ratio in a similar logic, so this
patch generalizes it to a common TSC scaling function.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
[Inline the multiplication and shift steps into mul_u64_u64_shr.  Remove
 BUG_ON.  - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:15 +01:00
Haozhong Zhang
ad721883e9 KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_arch
This patch moves the field of TSC scaling ratio from the architecture
struct vcpu_svm to the common struct kvm_vcpu_arch.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:14 +01:00
Haozhong Zhang
bc9b961b35 KVM: x86: Collect information for setting TSC scaling ratio
The number of bits of the fractional part of the 64-bit TSC scaling
ratio in VMX and SVM is different. This patch makes the architecture
code to collect the number of fractional bits and other related
information into variables that can be accessed in the common code.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:14 +01:00
Paolo Bonzini
893590c734 KVM: x86: declare a few variables as __read_mostly
These include module parameters and variables that are set by
kvm_x86_ops->hardware_setup.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:13 +01:00
Paolo Bonzini
450869d6db KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_common
They are exactly the same, except that handle_mmio_page_fault
has an unused argument and a call to WARN_ON.  Remove the unused
argument from the callers, and move the warning to (the former)
handle_mmio_page_fault_common.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 12:06:03 +01:00
Linus Torvalds
933425fb00 s390: A bunch of fixes and optimizations for interrupt and time
handling.
 
 PPC: Mostly bug fixes.
 
 ARM: No big features, but many small fixes and prerequisites including:
 - a number of fixes for the arch-timer
 - introducing proper level-triggered semantics for the arch-timers
 - a series of patches to synchronously halt a guest (prerequisite for
   IRQ forwarding)
 - some tracepoint improvements
 - a tweak for the EL2 panic handlers
 - some more VGIC cleanups getting rid of redundant state
 
 x86: quite a few changes:
 
 - support for VT-d posted interrupts (i.e. PCI devices can inject
 interrupts directly into vCPUs).  This introduces a new component (in
 virt/lib/) that connects VFIO and KVM together.  The same infrastructure
 will be used for ARM interrupt forwarding as well.
 
 - more Hyper-V features, though the main one Hyper-V synthetic interrupt
 controller will have to wait for 4.5.  These will let KVM expose Hyper-V
 devices.
 
 - nested virtualization now supports VPID (same as PCID but for vCPUs)
 which makes it quite a bit faster
 
 - for future hardware that supports NVDIMM, there is support for clflushopt,
 clwb, pcommit
 
 - support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in
 userspace, which reduces the attack surface of the hypervisor
 
 - obligatory smattering of SMM fixes
 
 - on the guest side, stable scheduler clock support was rewritten to not
 require help from the hypervisor.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJWO2IQAAoJEL/70l94x66D/K0H/3AovAgYmJQToZlimsktMk6a
 f2xhdIqfU5lIQQh5uNBCfL3o9o8H9Py1ym7aEw3fmztPHHJYc91oTatt2UEKhmEw
 VtZHp/dFHt3hwaIdXmjRPEXiYctraKCyrhaUYdWmUYkoKi7lW5OL5h+S7frG2U6u
 p/hFKnHRZfXHr6NSgIqvYkKqtnc+C0FWY696IZMzgCksOO8jB1xrxoSN3tANW3oJ
 PDV+4og0fN/Fr1capJUFEc/fejREHneANvlKrLaa8ht0qJQutoczNADUiSFLcMPG
 iHljXeDsv5eyjMtUuIL8+MPzcrIt/y4rY41ZPiKggxULrXc6H+JJL/e/zThZpXc=
 =iv2z
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "First batch of KVM changes for 4.4.

  s390:
     A bunch of fixes and optimizations for interrupt and time handling.

  PPC:
     Mostly bug fixes.

  ARM:
     No big features, but many small fixes and prerequisites including:

      - a number of fixes for the arch-timer

      - introducing proper level-triggered semantics for the arch-timers

      - a series of patches to synchronously halt a guest (prerequisite
        for IRQ forwarding)

      - some tracepoint improvements

      - a tweak for the EL2 panic handlers

      - some more VGIC cleanups getting rid of redundant state

  x86:
     Quite a few changes:

      - support for VT-d posted interrupts (i.e. PCI devices can inject
        interrupts directly into vCPUs).  This introduces a new
        component (in virt/lib/) that connects VFIO and KVM together.
        The same infrastructure will be used for ARM interrupt
        forwarding as well.

      - more Hyper-V features, though the main one Hyper-V synthetic
        interrupt controller will have to wait for 4.5.  These will let
        KVM expose Hyper-V devices.

      - nested virtualization now supports VPID (same as PCID but for
        vCPUs) which makes it quite a bit faster

      - for future hardware that supports NVDIMM, there is support for
        clflushopt, clwb, pcommit

      - support for "split irqchip", i.e.  LAPIC in kernel +
        IOAPIC/PIC/PIT in userspace, which reduces the attack surface of
        the hypervisor

      - obligatory smattering of SMM fixes

      - on the guest side, stable scheduler clock support was rewritten
        to not require help from the hypervisor"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits)
  KVM: VMX: Fix commit which broke PML
  KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
  KVM: x86: allow RSM from 64-bit mode
  KVM: VMX: fix SMEP and SMAP without EPT
  KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
  KVM: device assignment: remove pointless #ifdefs
  KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
  KVM: x86: zero apic_arb_prio on reset
  drivers/hv: share Hyper-V SynIC constants with userspace
  KVM: x86: handle SMBASE as physical address in RSM
  KVM: x86: add read_phys to x86_emulate_ops
  KVM: x86: removing unused variable
  KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs
  KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()
  KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings
  KVM: arm/arm64: Optimize away redundant LR tracking
  KVM: s390: use simple switch statement as multiplexer
  KVM: s390: drop useless newline in debugging data
  KVM: s390: SCA must not cross page boundaries
  KVM: arm: Do not indent the arguments of DECLARE_BITMAP
  ...
2015-11-05 16:26:26 -08:00
Kai Huang
a3eaa8649e KVM: VMX: Fix commit which broke PML
I found PML was broken since below commit:

	commit feda805fe7
	Author: Xiao Guangrong <guangrong.xiao@linux.intel.com>
	Date:   Wed Sep 9 14:05:55 2015 +0800

	KVM: VMX: unify SECONDARY_VM_EXEC_CONTROL update

	Unify the update in vmx_cpuid_update()

	Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
	[Rewrite to use vmcs_set_secondary_exec_control. - Paolo]
	Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The reason is in above commit vmx_cpuid_update calls vmx_secondary_exec_control,
in which currently SECONDARY_EXEC_ENABLE_PML bit is cleared unconditionally (as
PML is enabled in creating vcpu). Therefore if vcpu_cpuid_update is called after
vcpu is created, PML will be disabled unexpectedly while log-dirty code still
thinks PML is used.

Fix this by clearing SECONDARY_EXEC_ENABLE_PML in vmx_secondary_exec_control
only when PML is not supported or not enabled (!enable_pml). This is more
reasonable as PML is currently either always enabled or disabled. With this
explicit updating SECONDARY_EXEC_ENABLE_PML in vmx_enable{disable}_pml is not
needed so also rename vmx_enable{disable}_pml to vmx_create{destroy}_pml_buffer.

Fixes: feda805fe7
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
[While at it, change a wrong ASSERT to an "if".  The condition can happen
 if creating the VCPU fails with ENOMEM. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05 11:34:11 +01:00
Laszlo Ersek
879ae18804 KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
Commit b18d5431ac ("KVM: x86: fix CR0.CD virtualization") was
technically correct, but it broke OVMF guests by slowing down various
parts of the firmware.

Commit fb279950ba ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED") quirked the
first function modified by b18d5431ac, vmx_get_mt_mask(), for OVMF's
sake. This restored the speed of the OVMF code that runs before
PlatformPei (including the memory intensive LZMA decompression in SEC).

This patch extends the quirk to the second function modified by
b18d5431ac, kvm_set_cr0(). It eliminates the intrusive slowdown that
hits the EFI_MP_SERVICES_PROTOCOL implementation of edk2's
UefiCpuPkg/CpuDxe -- which is built into OVMF --, when CpuDxe starts up
all APs at once for initialization, in order to count them.

We also carry over the kvm_arch_has_noncoherent_dma() sub-condition from
the other half of the original commit b18d5431ac.

Fixes: b18d5431ac
Cc: stable@vger.kernel.org
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Tested-by: Janusz Mocek <januszmk6@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>#
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:39 +01:00
Paolo Bonzini
89651a3dec KVM: x86: allow RSM from 64-bit mode
The SDM says that exiting system management mode from 64-bit mode
is invalid, but that would be too good to be true.  But actually,
most of the code is already there to support exiting from compat
mode (EFER.LME=1, EFER.LMA=0).  Getting all the way from 64-bit
mode to real mode only requires clearing CS.L and CR4.PCIDE.

Cc: stable@vger.kernel.org
Fixes: 660a5d517a
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:38 +01:00
Radim Krčmář
656ec4a492 KVM: VMX: fix SMEP and SMAP without EPT
The comment in code had it mostly right, but we enable paging for
emulated real mode regardless of EPT.

Without EPT (which implies emulated real mode), secondary VCPUs won't
start unless we disable SM[AE]P when the guest doesn't use paging.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:37 +01:00
Paolo Bonzini
8a22f234a8 KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
The function is not used outside device assignment, and
kvm_arch_set_irq_inatomic has a different prototype.  Move it here and
make it static to avoid confusion.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:36 +01:00
Paolo Bonzini
7695405698 KVM: device assignment: remove pointless #ifdefs
The symbols are always defined.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:35 +01:00
Paolo Bonzini
b97e6de9c9 KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
We do not want to do too much work in atomic context, in particular
not walking all the VCPUs of the virtual machine.  So we want
to distinguish the architecture-specific injection function for irqfd
from kvm_set_msi.  Since it's still empty, reuse the newly added
kvm_arch_set_irq and rename it to kvm_arch_set_irq_inatomic.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:35 +01:00
Radim Krčmář
0669a51015 KVM: x86: zero apic_arb_prio on reset
BSP doesn't get INIT so its apic_arb_prio isn't zeroed after reboot.
BSP won't get lowest priority interrupts until other VCPUs get enough
interrupts to match their pre-reboot apic_arb_prio.

That behavior doesn't fit into KVM's round-robin-like interpretation of
lowest priority delivery ... userspace should KVM_SET_LAPIC on reset, so
just zero apic_arb_prio there.

Reported-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:34 +01:00
Radim Krčmář
f40606b147 KVM: x86: handle SMBASE as physical address in RSM
GET_SMSTATE depends on real mode to ensure that smbase+offset is treated
as a physical address, which has already caused a bug after shuffling
the code.  Enforce physical addressing.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:32 +01:00
Radim Krčmář
7a036a6f67 KVM: x86: add read_phys to x86_emulate_ops
We want to read the physical memory when emulating RSM.

X86EMUL_IO_NEEDED is returned on all errors for consistency with other
helpers.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:31 +01:00
Saurabh Sengar
2da29bccc5 KVM: x86: removing unused variable
removing unused variables, found by coccinelle

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 16:24:31 +01:00
Linus Torvalds
ce4d72fac1 Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu changes from Ingo Molnar:
 "There are two main areas of changes:

   - Rework of the extended FPU state code to robustify the kernel's
     usage of cpuid provided xstate sizes - and related changes (Dave
     Hansen)"

   - math emulation enhancements: new modern FPU instructions support,
     with testcases, plus cleanups (Denys Vlasnko)"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/fpu: Fixup uninitialized feature_name warning
  x86/fpu/math-emu: Add support for FISTTP instructions
  x86/fpu/math-emu, selftests: Add test for FISTTP instructions
  x86/fpu/math-emu: Add support for FCMOVcc insns
  x86/fpu/math-emu: Add support for F[U]COMI[P] insns
  x86/fpu/math-emu: Remove define layer for undocumented opcodes
  x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns
  x86/fpu/math-emu: Remove !NO_UNDOC_CODE
  x86/fpu: Check CPU-provided sizes against struct declarations
  x86/fpu: Check to ensure increasing-offset xstate offsets
  x86/fpu: Correct and check XSAVE xstate size calculations
  x86/fpu: Add C structures for AVX-512 state components
  x86/fpu: Rework YMM definition
  x86/fpu/mpx: Rework MPX 'xstate' types
  x86/fpu: Add xfeature_enabled() helper instead of test_bit()
  x86/fpu: Remove 'xfeature_nr'
  x86/fpu: Rework XSTATE_* macros to remove magic '2'
  x86/fpu: Rename XFEATURES_NR_MAX
  x86/fpu: Rename XSAVE macros
  x86/fpu: Remove partial LWP support definitions
  ...
2015-11-03 20:50:26 -08:00
Takuya Yoshikawa
8c85ac1c0a KVM: x86: MMU: Initialize force_pt_level before calling mapping_level()
Commit fd13690218 ("KVM: x86: MMU: Move mapping_level_dirty_bitmap()
call in mapping_level()") forgot to initialize force_pt_level to false
in FNAME(page_fault)() before calling mapping_level() like
nonpaging_map() does.  This can sometimes result in forcing page table
level mapping unnecessarily.

Fix this and move the first *force_pt_level check in mapping_level()
before kvm_vcpu_gfn_to_memslot() call to make it a bit clearer that
the variable must be initialized before mapping_level() gets called.

This change can also avoid calling kvm_vcpu_gfn_to_memslot() when
!check_hugepage_cache_consistency() check in tdp_page_fault() forces
page table level mapping.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 11:36:05 +02:00
Paolo Bonzini
5690891bce kvm: x86: zero EFER on INIT
Not zeroing EFER means that a 32-bit firmware cannot enter paging mode
without clearing EFER.LME first (which it should not know about).
Yang Zhang from Intel confirmed that the manual is wrong and EFER is
cleared to zero on INIT.

Fixes: d28bc9dd25
Cc: stable@vger.kernel.org
Cc: Yang Z Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 11:34:45 +02:00
Marcelo Tosatti
7cae2bedcb KVM: x86: move steal time initialization to vcpu entry time
As reported at https://bugs.launchpad.net/qemu/+bug/1494350,
it is possible to have vcpu->arch.st.last_steal initialized
from a thread other than vcpu thread, say the iothread, via
KVM_SET_MSRS.

Which can cause an overflow later (when subtracting from vcpu threads
sched_info.run_delay).

To avoid that, move steal time accumulation to vcpu entry time,
before copying steal time data to guest.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:34:16 +02:00
Takuya Yoshikawa
5225fdf8c8 KVM: x86: MMU: Eliminate an extra memory slot search in mapping_level()
Calling kvm_vcpu_gfn_to_memslot() twice in mapping_level() should be
avoided since getting a slot by binary search may not be negligible,
especially for virtual machines with many memory slots.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:34:02 +02:00
Takuya Yoshikawa
d8aacf5df8 KVM: x86: MMU: Remove mapping_level_dirty_bitmap()
Now that it has only one caller, and its name is not so helpful for
readers, remove it.  The new memslot_valid_for_gpte() function
makes it possible to share the common code between
gfn_to_memslot_dirty_bitmap() and mapping_level().

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:34:01 +02:00
Takuya Yoshikawa
fd13690218 KVM: x86: MMU: Move mapping_level_dirty_bitmap() call in mapping_level()
This is necessary to eliminate an extra memory slot search later.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:34:00 +02:00
Takuya Yoshikawa
5ed5c5c8fd KVM: x86: MMU: Simplify force_pt_level calculation code in FNAME(page_fault)()
As a bonus, an extra memory slot search can be eliminated when
is_self_change_mapping is true.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:34:00 +02:00
Takuya Yoshikawa
cd1872f028 KVM: x86: MMU: Make force_pt_level bool
This will be passed to a function later.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:33:59 +02:00
Joerg Roedel
6092d3d3e6 kvm: svm: Only propagate next_rip when guest supports it
Currently we always write the next_rip of the shadow vmcb to
the guests vmcb when we emulate a vmexit. This could confuse
the guest when its cpuid indicated no support for the
next_rip feature.

Fix this by only propagating next_rip if the guest actually
supports it.

Cc: Bandan Das <bsd@redhat.com>
Cc: Dirk Mueller <dmueller@suse.com>
Tested-By: Dirk Mueller <dmueller@suse.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:32:17 +02:00
Paolo Bonzini
951f9fd74f KVM: x86: manually unroll bad_mt_xwr loop
The loop is computing one of two constants, it can be simpler to write
everything inline.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:32:16 +02:00
Wanpeng Li
089d7b6ec5 KVM: nVMX: expose VPID capability to L1
Expose VPID capability to L1. For nested guests, we don't do anything
specific for single context invalidation. Hence, only advertise support
for global context invalidation. The major benefit of nested VPID comes
from having separate vpids when switching between L1 and L2, and also
when L2's vCPUs not sched in/out on L1.

Reviewed-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:30:55 +02:00
Wanpeng Li
5c614b3583 KVM: nVMX: nested VPID emulation
VPID is used to tag address space and avoid a TLB flush. Currently L0 use
the same VPID to run L1 and all its guests. KVM flushes VPID when switching
between L1 and L2.

This patch advertises VPID to the L1 hypervisor, then address space of L1
and L2 can be separately treated and avoid TLB flush when swithing between
L1 and L2. For each nested vmentry, if vpid12 is changed, reuse shadow vpid
w/ an invvpid.

Performance:

run lmbench on L2 w/ 3.5 kernel.

Context switching - times in microseconds - smaller is better
-------------------------------------------------------------------------
Host                 OS  2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
                         ctxsw  ctxsw  ctxsw ctxsw  ctxsw   ctxsw   ctxsw
--------- ------------- ------ ------ ------ ------ ------ ------- -------
kernel    Linux 3.5.0-1 1.2200 1.3700 1.4500 4.7800 2.3300 5.60000 2.88000  nested VPID
kernel    Linux 3.5.0-1 1.2600 1.4300 1.5600   12.7   12.9 3.49000 7.46000  vanilla

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:30:35 +02:00
Wanpeng Li
99b83ac893 KVM: nVMX: emulate the INVVPID instruction
Add the INVVPID instruction emulation.

Reviewed-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16 10:30:24 +02:00
Wanpeng Li
dd5f5341a3 KVM: VMX: introduce __vmx_flush_tlb to handle specific vpid
Introduce __vmx_flush_tlb() to handle specific vpid.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14 16:41:09 +02:00
Wanpeng Li
991e7a0eed KVM: VMX: adjust interface to allocate/free_vpid
Adjust allocate/free_vid so that they can be reused for the nested vpid.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14 16:41:09 +02:00
Radim Krčmář
13db77347d KVM: x86: don't notify userspace IOAPIC on edge EOI
On real hardware, edge-triggered interrupts don't set a bit in TMR,
which means that IOAPIC isn't notified on EOI.  Do the same here.

Staying in guest/kernel mode after edge EOI is what we want for most
devices.  If some bugs could be nicely worked around with edge EOI
notifications, we should invest in a better interface.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14 16:41:08 +02:00
Radim Krčmář
db2bdcbbbd KVM: x86: fix edge EOI and IOAPIC reconfig race
KVM uses eoi_exit_bitmap to track vectors that need an action on EOI.
The problem is that IOAPIC can be reconfigured while an interrupt with
old configuration is pending and eoi_exit_bitmap only remembers the
newest configuration;  thus EOI from the pending interrupt is not
recognized.

(Reconfiguration is not a problem for level interrupts, because IOAPIC
 sends interrupt with the new configuration.)

For an edge interrupt with ACK notifiers, like i8254 timer; things can
happen in this order
 1) IOAPIC inject a vector from i8254
 2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap
    on original VCPU gets cleared
 3) guest's handler for the vector does EOI
 4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is
    not in that VCPU's eoi_exit_bitmap
 5) i8254 stops working

A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the
vector is in PIR/IRR/ISR.

This creates an unwanted situation if the vector is reused by a
non-IOAPIC source, but I think it is so rare that we don't want to make
the solution more sophisticated.  The simple solution also doesn't work
if we are reconfiguring the vector.  (Shouldn't happen in the wild and
I'd rather fix users of ACK notifiers instead of working around that.)

The are no races because ioapic injection and reconfig are locked.

Fixes: b053b2aef2 ("KVM: x86: Add EOI exit bitmap inference")
[Before b053b2aef2, this bug happened only with APICv.]
Fixes: c7c9c56ca2 ("x86, apicv: add virtual interrupt delivery support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14 16:41:08 +02:00
Radim Krčmář
c77f3fab44 kvm: x86: set KVM_REQ_EVENT when updating IRR
After moving PIR to IRR, the interrupt needs to be delivered manually.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14 16:41:08 +02:00
Paolo Bonzini
bff98d3b01 Merge branch 'kvm-master' into HEAD
Merge more important SMM fixes.
2015-10-14 16:40:46 +02:00