Commit Graph

31 Commits

Author SHA1 Message Date
Linus Torvalds 5647ac0ad4 Removal of GENERIC_GPIO for v3.10
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
 cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
 possible to do so which has been causing confusion and breakage. This
 branch does the work to completely eliminate GENERIC_GPIO.
 
 However, it is not trivial to just create a branch to remove it. Over
 the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
 added to linux-next that conflicts with this branch. The following must
 be done to resolve the conflicts when merging this branch into mainline:
 
 * "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
   replaced with CONFIG_GPIOLIB
 * "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
   documentation.
 * Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
 * definitions of the option in architecture Kconfig code should be deleted.
 
 Stephen has 3 merge fixup patches[1] that do the above. They are currently
 applicable on mainline as of May 2nd.
 
 [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRifUnAAoJEEFnBt12D9kBs2YP/0U6+ia+xYvkVaJc28PDVIzn
 OReZNcJOYU8D5voxz0voaRD0EdcPwjbMu9Kp9aXMHlk4VxevF+8jCc/us0bIjtO1
 VcB5VmSCIhMhxdnBlum11Mk7Vr5MCweyl9NBsypnPt8cl4obMBZHf2yzoodFktNb
 wtyYlOb6FALtc6iDbOO6dG3w9F7FAOLvskUFzdv89m8mupTsBu9jw9NqFDbJHOex
 rxq0Sdd+kWF/nkJVcV5Y6jIdletRlhpipefMJ9diexreHvwqh+c4kJEYZaXgB5+m
 ha95cPbReK1d+RqzM3A8d4irzSVSmq4k7ijI6QkFOr48+AH7XsgKv5so885LKzMN
 IIXg2Phm9i0H8+ecEvhcc4oIYBHJiEKK54Y0qUD9dqbFoDGPTCSqMHdSSMbpAY+J
 bIIXlVzj1En3PPNUJLPt8q8Qz6WxCT9mDST3QSGYnD4o90HT+1R9j92RxGL6McOq
 rUOyJDwmzFvpBvKK4raGdOU435M+ps2NPKKNIRaIGQPPY9rM1kN4YqvhXukEsC9L
 3a3+3cQLh7iKxBHncxeQsJfethP1CPkJnzvF9r+ZZLf2rcPH4pbQIE2uO0XnX/nd
 5/DKi0nGgAJ//GMMzdo3RiOA5zGFjIZ/KMvfhQldpP6qFJRhqdGi6FPlAcwr1z1n
 YnCByPwwlvfC4LTXFOGL
 =xodc
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select
2013-05-09 09:59:16 -07:00
Doug Anderson b81dfaa01f i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
The i2c-arb-gpio-challenge driver implements an I2C arbitration scheme
where masters need to claim the bus with a GPIO before they can start
a transaction.  This should generally only be used when standard I2C
multimaster isn't appropriate for some reason (errata/bugs).

This driver is based on code that Simon Glass added to the i2c-s3c2410
driver in the Chrome OS kernel 3.4 tree.  The current incarnation as a
mux driver is as suggested by Grant Likely.  See
<https://patchwork.kernel.org/patch/1877311/> for some history.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-04-17 11:31:03 +02:00
Alexandre Courbot 76ec9d18b8 Convert selectors of GENERIC_GPIO to GPIOLIB
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-16 18:47:14 +09:00
Lars-Peter Clausen a205e63d12 i2c: Ignore the return value of i2c_del_mux_adapter()
i2c_del_mux_adapter() always returns 0. So all checks testing whether it will be
non zero will always evaluate to false and the conditional code is dead code.
This patch updates all callers of i2c_del_mux_adapter() to ignore its return
value and assume that it will always succeed (which it will). A subsequent
patch will make the return type of i2c_del_mux_adapter() void.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-04-02 07:07:29 +02:00
Jean Delvare 7fafae669a i2c: mux: gpio: Check gpio_direction_output return value
gpio_direction_output() may fail, check for that and deal with it
appropriately. Also log an error message if gpio_request() fails.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-27 08:55:13 +01:00
Guenter Roeck b104153e36 i2c: Fix my e-mail address in drivers and documentation
My old e-mail address is no longer working.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-22 11:18:34 +01:00
Linus Torvalds 52caa59ed3 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Highlights:

   - new drivers for Intel ismt & Broadcom bcm2835
   - a number of drivers got support for more variants and mostly got
     cleaned up on the way (sis630, i801, at91, tegra, designware)
   - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure
   - removed the i2c_smbus_process_call from the core since there are no
     users
   - mxs can now switch between PIO and DMA depending on the message
     size and the bus speed can now be arbitrary

  In addition, there is the usual bunch of fixes, cleanups, devm_*
  conversions, etc"

Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits)
  i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls
  i2c: pxa: remove incorrect __exit annotations
  i2c: ocores: Fix pointer to integer cast warning
  i2c: tegra: remove warning dump if timeout happen in transfer
  i2c: fix i2c-ismt.c printk format warning
  i2c: i801: Add Device IDs for Intel Wellsburg PCH
  i2c: add bcm2835 driver
  i2c: ismt: Add Seth and Myself as maintainers
  i2c: sis630: checkpatch cleanup
  i2c: sis630: display unsigned hex
  i2c: sis630: use hex to constants for SMBus commands
  i2c: sis630: fix behavior after collision
  i2c: sis630: clear sticky bits
  i2c: sis630: Add SIS964 support
  i2c: isch: Add module parameter for backbone clock rate if divider is unset
  i2c: at91: fix unsed variable warning when building with !CONFIG_OF
  i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  i2c: sh_mobile: don't send a stop condition by default inside transfers
  i2c: sh_mobile: eliminate an open-coded "goto" loop
  i2c: sh_mobile: fix timeout error handling
  ...
2013-02-26 09:41:53 -08:00
Doug Anderson 55827f4aa6 i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls
There is simply no reason to be manually setting the private driver
data to NULL in the remove/fail to probe cases.  This is just extra
cruft code that can be removed.

A few notes:
* Nothing relies on drvdata being set to NULL.
* The __device_release_driver() function eventually calls
  dev_set_drvdata(dev, NULL) anyway, so there's no need to do it
  twice.
* I verified that there were no cases where xxx_get_drvdata() was
  being called in these drivers and checking for / relying on the NULL
  return value.

This could be cleaned up kernel-wide but for now just take the baby
step and remove from the i2c subsystem.

Reported-by: Wolfram Sang <wsa@the-dreams.de>
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-22 00:25:50 +01:00
Greg Kroah-Hartman 422d26b6ec Merge 3.8-rc5 into driver-core-next
This resolves a gpio driver merge issue pointed out in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 21:06:30 -08:00
Laurent Navet 43a2bd42d0 i2c: muxes: fix wrong use of sizeof(ptr)
sizeof when applied to a pointer typed expression gives the size of
the pointer

The semantic patch that makes this output is available
in scripts/coccinelle/misc/noderef.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22 09:54:32 +01:00
Kees Cook 240335fd04 drivers/i2c/muxes: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Stephen Warren <swarren@nvidia.com>
CC: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
2013-01-11 11:38:05 -08:00
Bill Pemberton 0b255e927d i2c: remove __dev* attributes from subsystem
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio)
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio)
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3)
Acked-by: Barry Song <baohua.song@csr.com> (for sirf)
Reviewed-by: Jean Delvare <khali@linux-fr.org>
[wsa: Fixed "foo* bar" flaws while we are here]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-12-22 20:13:45 +01:00
Linus Torvalds 752451f01c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang:
 - CBUS driver (an I2C variant)
 - continued rework of the omap driver
 - s3c2410 gets lots of fixes and gains pinctrl support
 - at91 gains DMA support
 - the GPIO muxer gains devicetree probing
 - typical fixes and additions all over

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
  i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
  i2c: at91: add dma support
  i2c: at91: change struct members indentation
  i2c: at91: fix compilation warning
  i2c: mxs: Do not disable the I2C SMBus quick mode
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Remove recently introduced performance overheads
  i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
  i2c: s3c2410: Add fix for i2c suspend/resume
  i2c: s3c2410: Fix code to free gpios
  i2c: i2c-cbus-gpio: introduce driver
  i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
  i2c: ocores: Add irq support for sparc
  i2c: omap: Move the remove constraint
  ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
  i2c: s3c2410: do not special case HDMIPHY stuck bus detection
  i2c: s3c2410: use exponential back off while polling for bus idle
  i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
  i2c: s3c2410: grab adapter lock while changing i2c clock
  i2c: s3c2410: Add support for pinctrl
  ...
2012-12-18 16:51:10 -08:00
Maxime Ripard 9b7a0c40de i2c: mux: Add dt support to i2c-mux-gpio driver
Allow the i2c-mux-gpio to be used by a device tree enabled device. The
bindings are inspired by the one found in the i2c-mux-pinctrl driver.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>

[wsa: fixed some whitespace]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-16 09:28:27 +01:00
Guenter Roeck aa1e3e81e7 i2c-mux-pinctrl: Fix probe error path
When allocating the memory for i2c busses, the code checked the wrong
variable and thus never detected if there was a memory error.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-11-13 22:27:19 +01:00
Jean Delvare e7ee514058 i2c-mux-gpio: Add support for dynamically allocated GPIO pins
The code instantiating an i2c-mux-gpio platform device doesn't
necessarily know in advance the GPIO pin numbers it wants to use. If
pins are on a GPIO device which gets its base GPIO number assigned
dynamically at run-time, the values can't be hard-coded.

In that case, let the caller tell i2c-mux-gpio the name of the GPIO
chip and the (relative) GPIO pin numbers to use. At probe time, the
i2c-mux-gpio driver will look for the chip and apply the proper offset
to turn relative GPIO pin numbers to absolute GPIO pin numbers.

The same could be (and was so far) done on the caller's end, however
doing it in i2c-mux-gpio has two benefits:
* It avoids duplicating the code on every caller's side (about 30
  lines of code.)
* It allows for deferred probing for the muxed part of the I2C bus
  only. If finding the GPIO chip is the caller's responsibility, then
  deferred probing (if the GPIO chip isn't there yet) will not only
  affect the mux and the I2C bus segments behind it, but also the I2C
  bus trunk.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
2012-10-05 22:23:54 +02:00
Maxime Ripard 2614a85941 i2c-mux-gpio: Use devm_kzalloc instead of kzalloc
Use the devm_kzalloc managed function to stripdown the error and remove
code.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-05 22:23:53 +02:00
Jean Delvare eee543e824 i2c-mux: Add support for device auto-detection
Let I2C bus segments behind multiplexers have a class. This allows for
device auto-detection on these segments. As long as parent segments
don't share the same class, it should be fine.

I implemented support in drivers i2c-mux-gpio and i2c-mux-pca954x. I
left i2c-mux-pca9541 and i2c-mux-pinctrl alone for the moment as I
don't know if this feature makes sense for the use cases of these
drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Michael Lawnick <ml.lawnick@gmx.de>
Cc: Rodolfo Giometti <giometti@linux.it>
2012-10-05 22:23:51 +02:00
Guenter Roeck 83a638df36 i2c: Update Guenter Roeck's e-mail address
My old e-mail address won't be valid for much longer. Time to update it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24 14:13:56 +02:00
Stephen Warren ae58d1e406 i2c: Add generic I2C multiplexer using pinctrl API
This is useful for SoCs whose I2C module's signals can be routed to
different sets of pins at run-time, using the pinctrl API.

                                 +-----+  +-----+
                                 | dev |  | dev |
    +------------------------+   +-----+  +-----+
    | SoC                    |      |        |
    |                   /----|------+--------+
    |   +---+   +------+     | child bus A, on first set of pins
    |   |I2C|---|Pinmux|     |
    |   +---+   +------+     | child bus B, on second set of pins
    |                   \----|------+--------+--------+
    |                        |      |        |        |
    +------------------------+  +-----+  +-----+  +-----+
                                | dev |  | dev |  | dev |
                                +-----+  +-----+  +-----+

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-06-04 16:49:43 +02:00
Jean Delvare e7065e20d9 i2c: Rename last mux driver to standard pattern
Update the MAINTAINERS entry and all other references accordingly.

Based on an original patch by Wolfram Sang.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>

[wsa: fixed merge conflict due to rework in i2c_add_mux_adapter()]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12 14:28:18 +02:00
Wolfram Sang b4f0b74ea3 i2c: muxes: rename first set of drivers to a standard pattern
Apply a naming pattern like in the rest of the subsystem to a first set
of mux drivers. Those drivers are the low-hanging fruit; we want to pick
them to motivate upcoming drivers to follow the new pattern. The missing
GPIO driver will be converted in a later patch.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (pca9541)
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-12 14:28:17 +02:00
David Daney 5a3ecd5f98 i2c: Add a struct device * parameter to i2c_add_mux_adapter()
And adjust all callers.

The new device parameter is used in the next patch to initialize the
mux's of_node so that its children may be automatically populated.

Signed-off-by: David Daney <david.daney@cavium.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12 14:28:15 +02:00
Axel Lin de05497aab i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver()
This patch converts the drivers in drivers/i2c/muxes/* to use the
module_i2c_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Michael Lawnick <ml.lawnick@gmx.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26 21:47:19 +02:00
Axel Lin 245e99cfe8 i2c/gpio-i2cmux: Convert to use module_platform_driver()
Convert gpio-i2cmux to use the module_platform_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
Petri Gynther cd823db8b1 i2c/pca954x: Initialize the mux to disconnected state
pca954x power-on default is channel 0 connected. If multiple pca954x
muxes are connected to the same physical I2C bus, the parent bus will
see channel 0 devices behind both muxes by default. This is bad.

Scenario:
            -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50
            |
I2C-bus-1 ---
            |
            -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50

1. Load I2C bus driver: creates I2C-bus-1
2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111
3. Load eeprom driver
4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed
   onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default.

Fix: Initialize pca954x to disconnected state in pca954x_probe()

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
2011-06-29 11:36:11 +02:00
Peter Korsgaard 92ed1a76ca i2c: Add generic I2C multiplexer using GPIO API
Add an i2c mux driver providing access to i2c bus segments using a
hardware MUX sitting on a master bus and controlled through gpio pins.

E.G. something like:

  ----------              ----------  Bus segment 1   - - - - -
 |          | SCL/SDA    |          |-------------- |           |
 |          |------------|          |
 |          |            |          | Bus segment 2 |           |
 |  Linux   | GPIO 1..N  |   MUX    |---------------   Devices
 |          |------------|          |               |           |
 |          |            |          | Bus segment M
 |          |            |          |---------------|           |
  ----------              ----------                  - - - - -

SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M
according to the settings of the GPIO pins 1..N.

Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10 22:11:23 +01:00
Guenter Roeck db79f2a1d2 i2c/pca954x: Remove __devinit and __devexit from probe and remove functions
The underlying I2C adapter may or may not be present when this driver
gets initialized, and may disappear later, so there is no safe time at
which the probe and remove functions can be discarded.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24 18:16:59 +02:00
Guenter Roeck ae63b13bbe i2c/mux: Driver for PCA9541 I2C Master Selector
This patch adds support for PCA9541, an I2C Bus Master Selector.
The driver is modeled as single channel I2C Multiplexer to be able to utilize
the I2C multiplexer framework.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-10-24 18:16:58 +02:00
matt mooney ef9d9b8fb6 i2c: Change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24 18:16:58 +02:00
Michael Lawnick 7f528135da i2c: I2C bus multiplexer driver pca954x
I2C driver for PCA954x I2C multiplexer series.

Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11 18:21:03 +02:00