Commit Graph

47446 Commits

Author SHA1 Message Date
Linus Torvalds 1d8fcba1de Revert "cdc_subset: deal with a device that needs reset for timeout"
This reverts commit 20fbe3ae99.

As reported by Stephen Rothwell, it causes compile failures in certain
configurations:

  drivers/net/usb/cdc_subset.c:360:15: error: 'dummy_prereset' undeclared here (not in a function)
    .pre_reset = dummy_prereset,
                 ^
  drivers/net/usb/cdc_subset.c:361:16: error: 'dummy_postreset' undeclared here (not in a function)
    .post_reset = dummy_postreset,
                  ^

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David Miller <davem@davemloft.net>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-30 08:56:23 -07:00
Florian Fainelli d92f5dec63 net: phy: re-apply PHY fixups during phy_register_device
Commit 87aa9f9c61 ("net: phy: consolidate PHY reset in phy_init_hw()")
moved the call to phy_scan_fixups() in phy_init_hw() after a software
reset is performed.

By the time phy_init_hw() is called in phy_device_register(), no driver
has been bound to this PHY yet, so all the checks in phy_init_hw()
against the PHY driver and the PHY driver's config_init function will
return 0. We will therefore never call phy_scan_fixups() as we should.

Fix this by calling phy_scan_fixups() and check for its return value to
restore the intended functionality.

This broke PHY drivers which do register an early PHY fixup callback to
intercept the PHY probing and do things like changing the 32-bits unique
PHY identifier when a pseudo-PHY address has been used, as well as
board-specific PHY fixups that need to be applied during driver probe
time.

Reported-by: Hauke Merthens <hauke-m@hauke-m.de>
Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29 12:25:57 -07:00
Oliver Neukum c472ab68ad cdc-ether: clean packet filter upon probe
There are devices that don't do reset all the way. So the packet filter should
be set to a sane initial value. Failure to do so leads to intermittent failures
of DHCP on some systems under some conditions.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29 12:22:15 -07:00
Oliver Neukum 20fbe3ae99 cdc_subset: deal with a device that needs reset for timeout
This device needs to be reset to recover from a timeout.
Unfortunately this can be handled only at the level of
the subdrivers.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29 12:22:15 -07:00
Jun Zhao 545469f7a5 neighbour : fix ndm_type type error issue
ndm_type means L3 address type, in neighbour proxy and vxlan, it's RTN_UNICAST.
NDA_DST is for netlink TLV type, hence it's not right value in this context.

Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28 17:52:17 -07:00
David L Stevens 8266f5fcf0 sunvnet: only use connected ports when sending
The sunvnet driver doesn't check whether or not a port is connected when
transmitting packets, which results in failures if a port fails to connect
(e.g., due to a version mismatch). The original code also assumes
unnecessarily that the first port is up and a switch, even though there is
a flag for switch ports.

This patch only matches a port if it is connected, and otherwise uses the
switch_port flag to send the packet to a switch port that is up.

Signed-off-by: David L Stevens <david.stevens@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28 17:29:53 -07:00
David S. Miller 8356f97689 linux-can-fixes-for-3.16-20140725
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlPSBz0ACgkQjTAFq1RaXHPuwACfRPsgJi0EfpHAzPBkTlAR8Agw
 MREAn3eKn1vdj5q55Y43mMkTZErHPr43
 =jmRy
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-3.16-20140725' of git://gitorious.org/linux-can/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2014-07-25

this is a pull request of one patch for the net tree, hoping to get into the
3.16 release.

The patch by George Cherian fixes a regression in the c_can platform driver.
When using two interfaces the regression leads to a non function second
interface.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28 17:01:01 -07:00
George Cherian 33cf756569 can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource()
The raminit register is shared register for both can0 and can1. Since commit:

    32766ff net: can: Convert to use devm_ioremap_resource

devm_ioremap_resource() is used to map raminit register. When using both
interfaces the mapping for the can1 interface fails, leading to a non
functional can interface.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-07-25 09:23:08 +02:00
Dmitry Kravkov fe26566d8a bnx2x: fix crash during TSO tunneling
When TSO packet is transmitted additional BD w/o mapping is used
to describe the packed. The BD needs special handling in tx
completion.

kernel: Call Trace:
kernel: <IRQ>  [<ffffffff815e19ba>] dump_stack+0x19/0x1b
kernel: [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80
kernel: [<ffffffff8105df5c>] warn_slowpath_fmt+0x5c/0x80
kernel: [<ffffffff814a8c0d>] ? find_iova+0x4d/0x90
kernel: [<ffffffff814ab0e2>] intel_unmap_page.part.36+0x142/0x160
kernel: [<ffffffff814ad0e6>] intel_unmap_page+0x26/0x30
kernel: [<ffffffffa01f55d7>] bnx2x_free_tx_pkt+0x157/0x2b0 [bnx2x]
kernel: [<ffffffffa01f8dac>] bnx2x_tx_int+0xac/0x220 [bnx2x]
kernel: [<ffffffff8101a0d9>] ? read_tsc+0x9/0x20
kernel: [<ffffffffa01f8fdb>] bnx2x_poll+0xbb/0x3c0 [bnx2x]
kernel: [<ffffffff814d041a>] net_rx_action+0x15a/0x250
kernel: [<ffffffff81067047>] __do_softirq+0xf7/0x290
kernel: [<ffffffff815f3a5c>] call_softirq+0x1c/0x30
kernel: [<ffffffff81014d25>] do_softirq+0x55/0x90
kernel: [<ffffffff810673e5>] irq_exit+0x115/0x120
kernel: [<ffffffff815f4358>] do_IRQ+0x58/0xf0
kernel: [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d
kernel: <EOI>  [<ffffffff810bbff7>] ? clockevents_notify+0x127/0x140
kernel: [<ffffffff814834df>] ? cpuidle_enter_state+0x4f/0xc0
kernel: [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200
kernel: [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30
kernel: [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290
kernel: [<ffffffff815cfee1>] start_secondary+0x265/0x27b
kernel: ---[ end trace 11aa7726f18d7e80 ]---

Fixes: a848ade408 ("bnx2x: add CSUM and TSO support for encapsulation protocols")
Reported-by: Yulong Pei <ypei@redhat.com>
Cc: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 23:43:57 -07:00
hayeswang a3cc465d95 r8152: fix the checking of the usb speed
When the usb speed of the RTL8152 is not high speed, the USB_DEV_STAT[2:1]
should be equal to [0 1]. That is, the STAT_SPEED_FULL should be equal
to 2.

There is a easy way to check the usb speed by the speed field of the
struct usb_device. Use it to replace the original metheod.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Spotted-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 23:37:36 -07:00
David S. Miller e62f77579c Merge tag 'master-2014-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
pull request: wireless 2014-07-24

Please pull this batch of fixes intended for the 3.16 stream...

For the mac80211 fixes, Johannes says:

"I have two fixes: one for tracing that fixes a long-standing NULL
pointer dereference, and one for a mac80211 issue that causes iwlmvm to
send invalid frames during authentication/association."

and,

"One more fix - for a bug in the newly introduced code that obtains rate
control information for stations."

For the iwlwifi fixes, Emmanuel says:

"It includes a merge damage fix. This region has been changed in -next
and -fixes quite a few times and apparently, I failed to handle it
properly, so here the fix.  Along with that I have a fix from Eliad
to properly handle overlapping BSS in AP mode."

On top of that, Felix provides and ath9k fix for Tx stalls that happen
after an aggregation session failure.

Please let me know if there are problems!  There are some changes
here that will cause merge conflicts in -next.  Once you merge this
I can pull it into wireless-next and resolve those issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 23:22:15 -07:00
Ezequiel Garcia b3565f278a net: phy: Ensure the MDIO bus module is held
This commit adds proper module_{get,put} to prevent the MDIO bus module
from being unloaded while the phydev is connected. By doing so, we fix
a kernel panic produced when a MDIO driver is removed, but the phydev
that relies on it is attached and running.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 18:09:52 -07:00
Ezequiel Garcia a71e3c3796 net: phy: Set the driver when registering an MDIO bus device
mdiobus_register() registers a device which is already bound to a driver.
Hence, the driver pointer should be set properly in order to track down
the driver associated to the MDIO bus.

This will be used to allow ethernet driver to pin down a MDIO bus driver,
preventing it from being unloaded while the PHY device is running.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 18:09:52 -07:00
Yaniv Rosner 042d7654ec bnx2x: fix set_setting for some PHYs
Allow set_settings() to complete succesfully even if link is
not estabilished and port type isn't known yet.

Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 18:02:08 -07:00
Wei Yongjun dd1d3f8f99 hyperv: Fix error return code in netvsc_init_buf()
Fix to return -ENOMEM from the kalloc error handling
case instead of 0.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23 14:55:47 -07:00
Wei Yongjun 332cfc823d amd-xgbe: Fix error return code in xgbe_probe()
Fix to return a negative error code from the setting real tx queue
count error handling case instead of 0.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23 14:54:12 -07:00
Felix Fietkau c01fac1c77 ath9k: fix aggregation session lockup
If an aggregation session fails, frames still end up in the driver queue
with IEEE80211_TX_CTL_AMPDU set.
This causes tx for the affected station/tid to stall, since
ath_tx_get_tid_subframe returning packets to send.

Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation
session is running.

Cc: stable@vger.kernel.org
Reported-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23 13:03:11 -04:00
Florian Fainelli 474ea9cafc net: bcmgenet: correctly pad short packets
Packets shorter than ETH_ZLEN were not padded with zeroes, hence leaking
potentially sensitive information. This bug has been present since the
driver got accepted in commit 1c1008c793
("net: bcmgenet: add main driver file").

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22 19:59:19 -07:00
John W. Linville 0eeb315b20 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes 2014-07-22 12:49:22 -04:00
Linus Torvalds 15ba2236f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Null termination fix in dns_resolver got the pointer dereferncing
    wrong, fix from Ben Hutchings.

 2) ip_options_compile() has a benign but real buffer overflow when
    parsing options.  From Eric Dumazet.

 3) Table updates can crash in netfilter's nftables if none of the state
    flags indicate an actual change, from Pablo Neira Ayuso.

 4) Fix race in nf_tables dumping, also from Pablo.

 5) GRE-GRO support broke the forwarding path because the segmentation
    state was not fully initialized in these paths, from Jerry Chu.

 6) sunvnet driver leaks objects and potentially crashes on module
    unload, from Sowmini Varadhan.

 7) We can accidently generate the same handle for several u32
    classifier filters, fix from Cong Wang.

 8) Several edge case bug fixes in fragment handling in xen-netback,
    from Zoltan Kiss.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  ipv4: fix buffer overflow in ip_options_compile()
  batman-adv: fix TT VLAN inconsistency on VLAN re-add
  batman-adv: drop QinQ claim frames in bridge loop avoidance
  dns_resolver: Null-terminate the right string
  xen-netback: Fix pointer incrementation to avoid incorrect logging
  xen-netback: Fix releasing header slot on error path
  xen-netback: Fix releasing frag_list skbs in error path
  xen-netback: Fix handling frag_list on grant op error path
  net_sched: avoid generating same handle for u32 filters
  net: huawei_cdc_ncm: add "subclass 3" devices
  net: qmi_wwan: add two Sierra Wireless/Netgear devices
  wan/x25_asy: integer overflow in x25_asy_change_mtu()
  net: ppp: fix creating PPP pass and active filters
  net/mlx4_en: cq->irq_desc wasn't set in legacy EQ's
  sunvnet: clean up objects created in vnet_new() on vnet_exit()
  r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40
  net-gre-gro: Fix a bug that breaks the forwarding path
  netfilter: nf_tables: 64bit stats need some extra synchronization
  netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale
  netfilter: nf_tables: safe RCU iteration on list when dumping
  ...
2014-07-21 22:46:01 -07:00
Eliad Peller 4601879419 iwlwifi: mvm: pass beacons from foreign APs
In AP mode, configure the fw to pass beacons from
foreign APs, in order to be able to set the ht
protection IE properly.

Add the same filters in case of GO (which didn't have
any configured filter_flags, probably by mistake)

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-21 10:38:25 +03:00
Zoltan Kiss d8cfbfc466 xen-netback: Fix pointer incrementation to avoid incorrect logging
Due to this pointer is increased prematurely, the error log contains rubbish.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-20 20:56:06 -07:00
Zoltan Kiss 1b860da040 xen-netback: Fix releasing header slot on error path
This patch makes this function aware that the first frag and the header might
share the same ring slot. That could happen if the first slot is bigger than
PKT_PROT_LEN. Due to this the error path might release that slot twice or never,
depending on the error scenario.
xenvif_idx_release is also removed from xenvif_idx_unmap, and called separately.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-20 20:56:06 -07:00
Zoltan Kiss b42cc6e421 xen-netback: Fix releasing frag_list skbs in error path
When the grant operations failed, the skb is freed up eventually, and it tries
to release the frags, if there is any. For the main skb nr_frags is set to 0 to
avoid this, but on the frag_list it iterates through the frags array, and tries
to call put_page on the page pointer which contains garbage at that time.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-20 20:56:06 -07:00
Zoltan Kiss 1a998d3e6b xen-netback: Fix handling frag_list on grant op error path
The error handling for skb's with frag_list was completely wrong, it caused
double unmap attempts to happen if the error was on the first skb. Move it to
the right place in the loop.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-20 20:56:05 -07:00
Linus Torvalds b579fcca32 InfiniBand/RDMA fixes for 3.16
- cxgb4 hardware driver regression fixes
  - mlx5 hardware driver regression fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJTyYWiAAoJEENa44ZhAt0hKkMP/ROnFwRtk0DKNGbyZLx/gLpK
 hEvzNeqZKn8OS2eHMvkP+pbKWrm1GoPcPEMZVfZv8dqwS7PzcmHVsA7WjzJF0mXh
 PLuPZfLHu4UZAZttP7Hm8XV+p7uthD/Fvk60x/uzboMZhSjFt4Khb0tEvezZ8Jyh
 5bbkiCp2PokD4z32fFoErTxa5XE8bYuqL70G9YyMuwdZWS2W4WbjihYHbi8vBzFd
 IsAvl4Ms/Fs8B5aeK0beeuals0yLYishPQY/F+r10GUQ3Q3JlD1/5j/MML3SZOlX
 FfYC3BDm3zgVHdaDTohlXbGVvJbziI5xkj0cUxVIk5f3SVZC36/BR+AxtjlhLjvR
 GEh9wwCP1cfXt7tRFBOS11M869oUOjG/5SQozsnJTAztpll85wxIWOyCCupRSokX
 90YNFtdGTBMkkm5vbddpekw+ku/qhrG8oNhKLMXoP1v4nV/8HiVG+oZdzQYrPPOp
 KMkNtC6ItLCXBRF0hUGGAszUaFap0ZFCfWk9d8W+xpOnFzVgE8pkG2kRH1fty5ja
 HbI/0OhiX5x+lYhyzGUb+AnjNTT5yYba1M+t1Sr3JC5AxBzwiS4FYq7TRTnNGt+p
 H6/+WMw+PcCpCaOcVCivbFCl1gceA7bKCMuwjjFoO0CjDT8Tr6pX3gRcDvrxHVGr
 rLi5EcHdgJEsPfaUACbv
 =JbA3
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull infiniband/rdma fixes from Roland Dreier:
 - cxgb4 hardware driver regression fixes
 - mlx5 hardware driver regression fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx5: Enable "block multicast loopback" for kernel consumers
  RDMA/cxgb4: Call iwpm_init() only once
  mlx5_core: Fix possible race between mr tree insert/delete
  RDMA/cxgb4: Initialize the device status page
  RDMA/cxgb4: Clean up connection on ARP error
  RDMA/cxgb4: Fix skb_leak in reject_cr()
2014-07-18 20:39:34 -10:00
Bjørn Mork c2a6c7813f net: huawei_cdc_ncm: add "subclass 3" devices
Huawei's usage of the subclass and protocol fields is not 100%
clear to us, but there appears to be a very strict system.

A device with the "shared" device ID 12d1:1506 and this NCM
function was recently reported (showing only default altsetting):

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      3
      bInterfaceProtocol     22
      iInterface              8 CDC Network Control Model (NCM)
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  06 24 1a 00 01 1f
      ** UNRECOGNIZED:  0c 24 1b 00 01 00 04 10 14 dc 05 20
      ** UNRECOGNIZED:  0d 24 0f 0a 0f 00 00 00 ea 05 03 00 01
      ** UNRECOGNIZED:  05 24 06 01 01
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               9

Cc: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 16:49:50 -07:00
Bjørn Mork 5343330010 net: qmi_wwan: add two Sierra Wireless/Netgear devices
Add two device IDs found in an out-of-tree driver downloadable
from Netgear.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 16:49:50 -07:00
Dan Carpenter a28d0e873d wan/x25_asy: integer overflow in x25_asy_change_mtu()
If "newmtu * 2 + 4" is too large then it can cause an integer overflow
leading to memory corruption.  Eric Dumazet suggests that 65534 is a
reasonable upper limit.

Btw, "newmtu" is not allowed to be a negative number because of the
check in dev_set_mtu(), so that's ok.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 16:47:50 -07:00
Christoph Schulz cc25eaae23 net: ppp: fix creating PPP pass and active filters
Commit 568f194e8b ("net: ppp: use
sk_unattached_filter api") inadvertently changed the logic when setting
PPP pass and active filters. This applies to both the generic PPP subsystem
implemented by drivers/net/ppp/ppp_generic.c and the ISDN PPP subsystem
implemented by drivers/isdn/i4l/isdn_ppp.c. The original code in ppp_ioctl()
(or isdn_ppp_ioctl(), resp.) handling PPPIOCSPASS and PPPIOCSACTIVE allowed to
remove a pass/active filter previously set by using a filter of length zero.
However, with the new code this is not possible anymore as this case is not
explicitly checked for, which leads to passing NULL as a filter to
sk_unattached_filter_create(). This results in returning EINVAL to the caller.

Additionally, the variables ppp->pass_filter and ppp->active_filter (or
is->pass_filter and is->active_filter, resp.) are not reset to NULL, although
the filters they point to may have been destroyed by
sk_unattached_filter_destroy(), so in this EINVAL case dangling pointers are
left behind (provided the pointers were previously non-NULL).

This patch corrects both problems by checking whether the filter passed is
empty or non-empty, and prevents sk_unattached_filter_create() from being
called in the first case. Moreover, the pointers are always reset to NULL
as soon as sk_unattached_filter_destroy() returns.

Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 23:42:06 -07:00
Amir Vadai 858e6c3210 net/mlx4_en: cq->irq_desc wasn't set in legacy EQ's
Fix a regression introduced by commit 35f6f45 ("net/mlx4_en: Don't use
irq_affinity_notifier to track changes in IRQ affinity map").
When core is started in legacy EQ's (number of IRQ's < rx rings), cq->irq_desc
was NULL.  This caused a kernel crash under heavy traffic - when having more
than rx NAPI budget completions.
Fixed to have it set for both EQ modes.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 23:28:32 -07:00
Sowmini Varadhan a4b70a07ed sunvnet: clean up objects created in vnet_new() on vnet_exit()
Nothing cleans up the objects created by
vnet_new(), they are completely leaked.

vnet_exit(), after doing the vio_unregister_driver() to clean
up ports, should call a helper function that iterates over vnet_list
and cleans up those objects. This includes unregister_netdevice()
as well as free_netdev().

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Karl Volz <karl.volz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 22:44:07 -07:00
Michel Dänzer 7a9810e7bd r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40
The ethernet port on my ASUS A88X Pro mainboard stopped working
several times a day, with messages like these in dmesg:

AMD-Vi: Event logged [IO_PAGE_FAULT device=05:00.0 domain=0x001e address=0x0000000000003000 flags=0x0050]

Searching the web for these messages led me to similar reports about
different hardware supported by r8169, and eventually to commits
3ced8c955e ('r8169: enforce RX_MULTI_EN
for the 8168f.') and eb2dc35d99 ('r8169:
RxConfig hack for the 8168evl'). So I tried this change, and it fixes
the problem for me.

Signed-off-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 22:23:55 -07:00
Olivier Sobrie 8f9818af4e hso: fix deadlock when receiving bursts of data
When the module sends bursts of data, sometimes a deadlock happens in
the hso driver when the tty buffer doesn't get the chance to be flushed
quickly enough.

Remove the endless while loop in function put_rxbuf_data() which is
called by the urb completion handler.
If there isn't enough room in the tty buffer, discards all the data
received in the URB.

Cc: David Miller <davem@davemloft.net>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 19:27:34 -07:00
Olivier Sobrie 5c763edfe4 hso: remove unused workqueue
The workqueue "retry_unthrottle_workqueue" is not scheduled anywhere
in the code. So, remove it.

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 19:27:34 -07:00
Christoph Schulz 3916a31927 net: ppp: don't call sk_chk_filter twice
Commit 568f194e8b ("net: ppp: use
sk_unattached_filter api") causes sk_chk_filter() to be called twice when
setting a PPP pass or active filter. This applies to both the generic PPP
subsystem implemented by drivers/net/ppp/ppp_generic.c and the ISDN PPP
subsystem implemented by drivers/isdn/i4l/isdn_ppp.c. The first call is from
within get_filter(). The second one is through the call chain

  ppp_ioctl() or isdn_ppp_ioctl()
  --> sk_unattached_filter_create()
      --> __sk_prepare_filter()
          --> sk_chk_filter()

The first call from within get_filter() should be deleted as get_filter() is
called just before calling sk_unattached_filter_create() later on, which
eventually calls sk_chk_filter() anyway.

For 3.15.x, this proposed change is a bugfix rather than a pure optimization as
in that branch, sk_chk_filter() may replace filter codes by other codes which
are not recognized when executing sk_chk_filter() a second time. So with
3.15.x, if sk_chk_filter() is called twice, the second invocation may yield
EINVAL (this depends on the filter codes found in the filter to be set, but
because the replacement is done for frequently used codes, this is almost
always the case). The net effect is that setting pass and/or active PPP filters
does not work anymore, since sk_unattached_filter_create() always returns
EINVAL due to the second call to sk_chk_filter(), regardless whether the filter
was originally sane or not.

Signed-off-by: Christoph Schulz <develop@kristov.de>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 16:15:12 -07:00
Jason Wang 32b333fe99 mlx4: mark napi id for gro_skb
Napi id was not marked for gro_skb, this will lead rx busy loop won't
work correctly since they stack never try to call low latency receive
method because of a zero socket napi id. Fix this by marking napi id
for gro_skb.

The transaction rate of 1 byte netperf tcp_rr gets about 50% increased
(from 20531.68 to 30610.88).

Cc: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 16:14:16 -07:00
Nikolay Aleksandrov 548d28bd0e bonding: fix ad_select module param check
Obvious copy/paste error when I converted the ad_select to the new
option API. "lacp_rate" there should be "ad_select" so we can get the
proper value.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: David S. Miller <davem@davemloft.net>

Fixes: 9e5f5eebe7 ("bonding: convert ad_select to use the new option
API")
Reported-by: Karim Scheik <karim.scheik@prisma-solutions.at>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 14:36:58 -07:00
Christoph Schulz a8a3e41c67 net: pppoe: use correct channel MTU when using Multilink PPP
The PPP channel MTU is used with Multilink PPP when ppp_mp_explode() (see
ppp_generic module) tries to determine how big a fragment might be. According
to RFC 1661, the MTU excludes the 2-byte PPP protocol field, see the
corresponding comment and code in ppp_mp_explode():

		/*
		 * hdrlen includes the 2-byte PPP protocol field, but the
		 * MTU counts only the payload excluding the protocol field.
		 * (RFC1661 Section 2)
		 */
		mtu = pch->chan->mtu - (hdrlen - 2);

However, the pppoe module *does* include the PPP protocol field in the channel
MTU, which is wrong as it causes the PPP payload to be 1-2 bytes too big under
certain circumstances (one byte if PPP protocol compression is used, two
otherwise), causing the generated Ethernet packets to be dropped. So the pppoe
module has to subtract two bytes from the channel MTU. This error only
manifests itself when using Multilink PPP, as otherwise the channel MTU is not
used anywhere.

In the following, I will describe how to reproduce this bug. We configure two
pppd instances for multilink PPP over two PPPoE links, say eth2 and eth3, with
a MTU of 1492 bytes for each link and a MRRU of 2976 bytes. (This MRRU is
computed by adding the two link MTUs and subtracting the MP header twice, which
is 4 bytes long.) The necessary pppd statements on both sides are "multilink
mtu 1492 mru 1492 mrru 2976". On the client side, we additionally need "plugin
rp-pppoe.so eth2" and "plugin rp-pppoe.so eth3", respectively; on the server
side, we additionally need to start two pppoe-server instances to be able to
establish two PPPoE sessions, one over eth2 and one over eth3. We set the MTU
of the PPP network interface to the MRRU (2976) on both sides of the connection
in order to make use of the higher bandwidth. (If we didn't do that, IP
fragmentation would kick in, which we want to avoid.)

Now we send a ICMPv4 echo request with a payload of 2948 bytes from client to
server over the PPP link. This results in the following network packet:

   2948 (echo payload)
 +    8 (ICMPv4 header)
 +   20 (IPv4 header)
---------------------
   2976 (PPP payload)

These 2976 bytes do not exceed the MTU of the PPP network interface, so the
IP packet is not fragmented. Now the multilink PPP code in ppp_mp_explode()
prepends one protocol byte (0x21 for IPv4), making the packet one byte bigger
than the negotiated MRRU. So this packet would have to be divided in three
fragments. But this does not happen as each link MTU is assumed to be two bytes
larger. So this packet is diveded into two fragments only, one of size 1489 and
one of size 1488. Now we have for that bigger fragment:

   1489 (PPP payload)
 +    4 (MP header)
 +    2 (PPP protocol field for the MP payload (0x3d))
 +    6 (PPPoE header)
--------------------------
   1501 (Ethernet payload)

This packet exceeds the link MTU and is discarded.

If one configures the link MTU on the client side to 1501, one can see the
discarded Ethernet frames with tcpdump running on the client. A

ping -s 2948 -c 1 192.168.15.254

leads to the smaller fragment that is correctly received on the server side:

(tcpdump -vvvne -i eth3 pppoes and ppp proto 0x3d)
52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x3] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [end], length 1492

and to the bigger fragment that is not received on the server side:

(tcpdump -vvvne -i eth2 pppoes and ppp proto 0x3d)
52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864),
  length 1515: PPPoE  [ses 0x5] MLPPP (0x003d), length 1495: seq 0x000,
  Flags [begin], length 1493

With the patch below, we correctly obtain three fragments:

52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [begin], length 1492
52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [none], length 1492
52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 27: PPPoE  [ses 0x1] MLPPP (0x003d), length 7: seq 0x000,
  Flags [end], length 5

And the ICMPv4 echo request is successfully received at the server side:

IP (tos 0x0, ttl 64, id 21925, offset 0, flags [DF], proto ICMP (1),
  length 2976)
    192.168.222.2 > 192.168.15.254: ICMP echo request, id 30530, seq 0,
      length 2956

The bug was introduced in commit c9aa689537
("[PPPOE]: Advertise PPPoE MTU") from the very beginning. This patch applies
to 3.10 upwards but the fix can be applied (with minor modifications) to
kernels as old as 2.6.32.

Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 14:35:46 -07:00
Florian Fainelli 5a680fad35 net: bcmgenet: fix RGMII_MODE_EN bit
RGMII_MODE_EN bit was defined to 0, while it is actually 6. It was not
much of a problem on older designs where this was a no-op, and the RGMII
data-path would always be enabled, but newer GENET controllers need to
explicitely enable their RGMII data-pad using this bit.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-13 22:55:37 -07:00
hayeswang a91d45f1a3 r8152: fix r8152_csum_workaround function
The transport offset of the IPv4 packet should be fixed and wouldn't
be out of the hw limitation, so the r8152_csum_workaround() should
be used for IPv6 packets.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11 14:51:21 -07:00
Suresh Reddy 4cad9f3b61 be2net: set EQ DB clear-intr bit in be_open()
On BE3, if the clear-interrupt bit of the EQ doorbell is not set the first
time it is armed, ocassionally we have observed that the EQ doesn't raise
anymore interrupts even if it is in armed state.
This patch fixes this by setting the clear-interrupt bit when EQs are
armed for the first time in be_open().

Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11 14:34:33 -07:00
Alexey Khoroshilov 19eeb2f9e7 farsync: fix invalid memory accesses in fst_add_one() and fst_init_card()
There are several issues in fst_add_one() and fst_init_card():
- invalid pointer dereference at card->ports[card->nports - 1] if
  register_hdlc_device() fails for the first port in fst_init_card();
- fst_card_array overflow at fst_card_array[no_of_cards_added]
  because there is no checks for array overflow;
- use after free because pointer to deallocated card is left in fst_card_array
  if something fails after fst_card_array[no_of_cards_added] = card;
- several leaks on failure paths in fst_add_one().

The patch fixes all the issues and makes code more readable.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11 13:34:48 -07:00
John W. Linville d672f939bc Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2014-07-10 17:14:14 -04:00
Stefan Assmann 76252723e8 igb: do a reset on SR-IOV re-init if device is down
To properly re-initialize SR-IOV it is necessary to reset the device
even if it is already down. Not doing this may result in Tx unit hangs.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 12:45:24 -07:00
Todd Fujinaka 948264879b igb: Workaround for i210 Errata 25: Slow System Clock
On some devices, the internal PLL circuit occasionally provides the
wrong clock frequency after power up. The probability of failure is less
than one failure per 1000 power cycles. When the failure occurs, the
internal clock frequency is around 1/20 of the correct frequency.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 01:48:28 -07:00
Joonyoung Shim b4df480f68 usbnet: smsc95xx: add reset_resume function with reset operation
The smsc95xx needs to resume with reset operation. Otherwise it causes
system hang by network error like below after resume. This case appears
on odroid u3 board.

[    9.727600] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
[    9.727648] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
[    9.727689] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
[    9.727728] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
[    9.729486] PM: resume of devices complete after 2011.219 msecs
[   10.117609] Restarting tasks ... done.
[   11.725099] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
[   13.480846] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
[   13.481361] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped
...

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 00:42:57 -07:00
Stefan Sørensen a12f78c582 dp83640: Always decode received status frames
Currently status frames are only handled when packet timestamping is
enabled, but status frames are also needed for pin event timestamping.

Fix by moving packet timestamping check to after status frame decode.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09 17:00:34 -07:00
Sagi Grimberg 6ef07a9f36 mlx5_core: Fix possible race between mr tree insert/delete
In mlx5_core_destroy_mkey(), we must first remove the mr from the
radix tree and then destroy it.  Otherwise we might hit a race if the
key was reallocated and we attempted to insert it to the radix tree.

Also handle radix tree insert/delete failures.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Eli Cohen <elic@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-07-09 16:58:58 -07:00
hayeswang b51ecea852 r8169: disable L23
For RTL8411, RTL8111G, RTL8402, RTL8105, and RTL8106, disable the feature
of entering the L2/L3 link state of the PCIe. When the nic starts the process
of entering the L2/L3 link state and the PCI reset occurs before the work
is finished, the work would be queued and continue after the next the PCI
reset occurs. This causes the device stays in L2/L3 link state, and the system
couldn't find the device.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09 16:42:08 -07:00