Commit Graph

54 Commits

Author SHA1 Message Date
Eric W. Biederman 99b19d1647 mnt: In propgate_umount handle visiting mounts in any order
While investigating some poor umount performance I realized that in
the case of overlapping mount trees where some of the mounts are locked
the code has been failing to unmount all of the mounts it should
have been unmounting.

This failure to unmount all of the necessary
mounts can be reproduced with:

$ cat locked_mounts_test.sh

mount -t tmpfs test-base /mnt
mount --make-shared /mnt
mkdir -p /mnt/b

mount -t tmpfs test1 /mnt/b
mount --make-shared /mnt/b
mkdir -p /mnt/b/10

mount -t tmpfs test2 /mnt/b/10
mount --make-shared /mnt/b/10
mkdir -p /mnt/b/10/20

mount --rbind /mnt/b /mnt/b/10/20

unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi'
sleep 1
umount -l /mnt/b
wait %%

$ unshare -Urm ./locked_mounts_test.sh

This failure is corrected by removing the prepass that marks mounts
that may be umounted.

A first pass is added that umounts mounts if possible and if not sets
mount mark if they could be unmounted if they weren't locked and adds
them to a list to umount possibilities.  This first pass reconsiders
the mounts parent if it is on the list of umount possibilities, ensuring
that information of umoutability will pass from child to mount parent.

A second pass then walks through all mounts that are umounted and processes
their children unmounting them or marking them for reparenting.

A last pass cleans up the state on the mounts that could not be umounted
and if applicable reparents them to their first parent that remained
mounted.

While a bit longer than the old code this code is much more robust
as it allows information to flow up from the leaves and down
from the trunk making the order in which mounts are encountered
in the umount propgation tree irrelevant.

Cc: stable@vger.kernel.org
Fixes: 0c56fe3142 ("mnt: Don't propagate unmounts to locked mounts")
Reviewed-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:41:16 -05:00
Eric W. Biederman 570487d3fa mnt: In umount propagation reparent in a separate pass
It was observed that in some pathlogical cases that the current code
does not unmount everything it should.  After investigation it
was determined that the issue is that mnt_change_mntpoint can
can change which mounts are available to be unmounted during mount
propagation which is wrong.

The trivial reproducer is:
$ cat ./pathological.sh

mount -t tmpfs test-base /mnt
cd /mnt
mkdir 1 2 1/1
mount --bind 1 1
mount --make-shared 1
mount --bind 1 2
mount --bind 1/1 1/1
mount --bind 1/1 1/1
echo
grep test-base /proc/self/mountinfo
umount 1/1
echo
grep test-base /proc/self/mountinfo

$ unshare -Urm ./pathological.sh

The expected output looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

The output without the fix looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

That last mount in the output was in the propgation tree to be unmounted but
was missed because the mnt_change_mountpoint changed it's parent before the walk
through the mount propagation tree observed it.

Cc: stable@vger.kernel.org
Fixes: 1064f874ab ("mnt: Tuck mounts under others instead of creating shadow/side mounts.")
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:40:32 -05:00
Jan Kara 08991e83b7 fsnotify: Free fsnotify_mark_connector when there is no mark attached
Currently we free fsnotify_mark_connector structure only when inode /
vfsmount is getting freed. This can however impose noticeable memory
overhead when marks get attached to inodes only temporarily. So free the
connector structure once the last mark is detached from the object.
Since notification infrastructure can be working with the connector
under the protection of fsnotify_mark_srcu, we have to be careful and
free the fsnotify_mark_connector only after SRCU period passes.

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10 17:37:35 +02:00
Jan Kara 9dd813c15b fsnotify: Move mark list head from object into dedicated structure
Currently notification marks are attached to object (inode or vfsmnt) by
a hlist_head in the object. The list is also protected by a spinlock in
the object. So while there is any mark attached to the list of marks,
the object must be pinned in memory (and thus e.g. last iput() deleting
inode cannot happen). Also for list iteration in fsnotify() to work, we
must hold fsnotify_mark_srcu lock so that mark itself and
mark->obj_list.next cannot get freed. Thus we are required to wait for
response to fanotify events from userspace process with
fsnotify_mark_srcu lock held. That causes issues when userspace process
is buggy and does not reply to some event - basically the whole
notification subsystem gets eventually stuck.

So to be able to drop fsnotify_mark_srcu lock while waiting for
response, we have to pin the mark in memory and make sure it stays in
the object list (as removing the mark waiting for response could lead to
lost notification events for groups later in the list). However we don't
want inode reclaim to block on such mark as that would lead to system
just locking up elsewhere.

This commit is the first in the series that paves way towards solving
these conflicting lifetime needs. Instead of anchoring the list of marks
directly in the object, we anchor it in a dedicated structure
(fsnotify_mark_connector) and just point to that structure from the
object. The following commits will also add spinlock protecting the list
and object pointer to the structure.

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10 17:37:34 +02:00
Eric W. Biederman 1064f874ab mnt: Tuck mounts under others instead of creating shadow/side mounts.
Ever since mount propagation was introduced in cases where a mount in
propagated to parent mount mountpoint pair that is already in use the
code has placed the new mount behind the old mount in the mount hash
table.

This implementation detail is problematic as it allows creating
arbitrary length mount hash chains.

Furthermore it invalidates the constraint maintained elsewhere in the
mount code that a parent mount and a mountpoint pair will have exactly
one mount upon them.  Making it hard to deal with and to talk about
this special case in the mount code.

Modify mount propagation to notice when there is already a mount at
the parent mount and mountpoint where a new mount is propagating to
and place that preexisting mount on top of the new mount.

Modify unmount propagation to notice when a mount that is being
unmounted has another mount on top of it (and no other children), and
to replace the unmounted mount with the mount on top of it.

Move the MNT_UMUONT test from __lookup_mnt_last into
__propagate_umount as that is the only call of __lookup_mnt_last where
MNT_UMOUNT may be set on any mount visible in the mount hash table.

These modifications allow:
 - __lookup_mnt_last to be removed.
 - attach_shadows to be renamed __attach_mnt and its shadow
   handling to be removed.
 - commit_tree to be simplified
 - copy_tree to be simplified

The result is an easier to understand tree of mounts that does not
allow creation of arbitrary length hash chains in the mount hash table.

The result is also a very slight userspace visible difference in semantics.
The following two cases now behave identically, where before order
mattered:

case 1: (explicit user action)
	B is a slave of A
	mount something on A/a , it will propagate to B/a
	and than mount something on B/a

case 2: (tucked mount)
	B is a slave of A
	mount something on B/a
	and than mount something on A/a

Histroically umount A/a would fail in case 1 and succeed in case 2.
Now umount A/a succeeds in both configurations.

This very small change in semantics appears if anything to be a bug
fix to me and my survey of userspace leads me to believe that no programs
will notice or care of this subtle semantic change.

v2: Updated to mnt_change_mountpoint to not call dput or mntput
and instead to decrement the counts directly.  It is guaranteed
that there will be other references when mnt_change_mountpoint is
called so this is safe.

v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt
    As the locking in fs/namespace.c changed between v2 and v3.

v4: Reworked the logic in propagate_mount_busy and __propagate_umount
    that detects when a mount completely covers another mount.

v5: Removed unnecessary tests whose result is alwasy true in
    find_topper and attach_recursive_mnt.

v6: Document the user space visible semantic difference.

Cc: stable@vger.kernel.org
Fixes: b90fa9ae8f ("[PATCH] shared mount handling: bind and rbind")
Tested-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-02-04 00:01:06 +13:00
Ian Kent c6609c0a1c vfs: add path_is_mountpoint() helper
d_mountpoint() can only be used reliably to establish if a dentry is
not mounted in any namespace. It isn't aware of the possibility there
may be multiple mounts using a given dentry that may be in a different
namespace.

Add helper functions, path_is_mountpoint(), that checks if a struct path
is a mountpoint for this case.

Link: http://lkml.kernel.org/r/20161011053358.27645.9729.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-03 20:51:35 -05:00
Eric W. Biederman d29216842a mnt: Add a per mount namespace limit on the number of mounts
CAI Qian <caiqian@redhat.com> pointed out that the semantics
of shared subtrees make it possible to create an exponentially
increasing number of mounts in a mount namespace.

    mkdir /tmp/1 /tmp/2
    mount --make-rshared /
    for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done

Will create create 2^20 or 1048576 mounts, which is a practical problem
as some people have managed to hit this by accident.

As such CVE-2016-6213 was assigned.

Ian Kent <raven@themaw.net> described the situation for autofs users
as follows:

> The number of mounts for direct mount maps is usually not very large because of
> the way they are implemented, large direct mount maps can have performance
> problems. There can be anywhere from a few (likely case a few hundred) to less
> than 10000, plus mounts that have been triggered and not yet expired.
>
> Indirect mounts have one autofs mount at the root plus the number of mounts that
> have been triggered and not yet expired.
>
> The number of autofs indirect map entries can range from a few to the common
> case of several thousand and in rare cases up to between 30000 and 50000. I've
> not heard of people with maps larger than 50000 entries.
>
> The larger the number of map entries the greater the possibility for a large
> number of active mounts so it's not hard to expect cases of a 1000 or somewhat
> more active mounts.

So I am setting the default number of mounts allowed per mount
namespace at 100,000.  This is more than enough for any use case I
know of, but small enough to quickly stop an exponential increase
in mounts.  Which should be perfect to catch misconfigurations and
malfunctioning programs.

For anyone who needs a higher limit this can be changed by writing
to the new /proc/sys/fs/mount-max sysctl.

Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-30 12:46:48 -05:00
Eric W. Biederman 537f7ccb39 mntns: Add a limit on the number of mount namespaces.
v2: Fixed the very obvious lack of setting ucounts
    on struct mnt_ns reported by Andrei Vagin, and the kbuild
    test report.

Reported-by: Andrei Vagin <avagin@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-08-31 07:28:35 -05:00
Yann Droneaud ede1bf0dcf fs: use seq_open_private() for proc_mounts
A patchset to remove support for passing pre-allocated struct seq_file to
seq_open().  Such feature is undocumented and prone to error.

In particular, if seq_release() is used in release handler, it will
kfree() a pointer which was not allocated by seq_open().

So this patchset drops support for pre-allocated struct seq_file: it's
only of use in proc_namespace.c and can be easily replaced by using
seq_open_private()/seq_release_private().

Additionally, it documents the use of file->private_data to hold pointer
to struct seq_file by seq_open().

This patch (of 3):

Since patch described below, from v2.6.15-rc1, seq_open() could use a
struct seq_file already allocated by the caller if the pointer to the
structure is stored in file->private_data before calling the function.

    Commit 1abe77b0fc
    Author: Al Viro <viro@zeniv.linux.org.uk>
    Date:   Mon Nov 7 17:15:34 2005 -0500

        [PATCH] allow callers of seq_open do allocation themselves

        Allow caller of seq_open() to kmalloc() seq_file + whatever else they
        want and set ->private_data to it.  seq_open() will then abstain from
        doing allocation itself.

Such behavior is only used by mounts_open_common().

In order to drop support for such uncommon feature, proc_mounts is
converted to use seq_open_private(), which take care of allocating the
proc_mounts structure, making it available through ->private in struct
seq_file.

Conversely, proc_mounts is converted to use seq_release_private(), in
order to release the private structure allocated by seq_open_private().

Then, ->private is used directly instead of proc_mounts() macro to access
to the proc_mounts structure.

Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:56 -07:00
Al Viro 294d71ff2f new helper: __legitimize_mnt()
same as legitimize_mnt(), except that it does *not* drop and regain
rcu_read_lock; return values are
0  =>  grabbed a reference, we are fine
1  =>  failed, just go away
-1 =>  failed, go away and mntput(bastard) when outside of rcu_read_lock

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-11 08:13:14 -04:00
Al Viro 87b95ce096 switch the IO-triggering parts of umount to fs_pin
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 23:17:29 -05:00
Al Viro 435d5f4bb2 common object embedded into various struct ....ns
for now - just move corresponding ->proc_inum instances over there

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:31:00 -05:00
Eric W. Biederman 80b5dce8c5 vfs: Add a function to lazily unmount all mounts from any dentry.
The new function detach_mounts comes in two pieces.  The first piece
is a static inline test of d_mounpoint that returns immediately
without taking any locks if d_mounpoint is not set.  In the common
case when mountpoints are absent this allows the vfs to continue
running with it's same cacheline foot print.

The second piece of detach_mounts __detach_mounts actually does the
work and it assumes that a mountpoint is present so it is slow and
takes namespace_sem for write, and then locks the mount hash (aka
mount_lock) after a struct mountpoint has been found.

With those two locks held each entry on the list of mounts on a
mountpoint is selected and lazily unmounted until all of the mount
have been lazily unmounted.

v7: Wrote a proper change description and removed the changelog
    documenting deleted wrong turns.

Signed-off-by: Eric W. Biederman <ebiederman@twitter.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:38:55 -04:00
Eric W. Biederman 0a5eb7c818 vfs: Keep a list of mounts on a mount point
To spot any possible problems call BUG if a mountpoint
is put when it's list of mounts is not empty.

AV: use hlist instead of list_head

Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Eric W. Biederman <ebiederman@twitter.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:38:54 -04:00
Eric W. Biederman 7af1364ffa vfs: Don't allow overwriting mounts in the current mount namespace
In preparation for allowing mountpoints to be renamed and unlinked
in remote filesystems and in other mount namespaces test if on a dentry
there is a mount in the local mount namespace before allowing it to
be renamed or unlinked.

The primary motivation here are old versions of fusermount unmount
which is not safe if the a path can be renamed or unlinked while it is
verifying the mount is safe to unmount.  More recent versions are simpler
and safer by simply using UMOUNT_NOFOLLOW when unmounting a mount
in a directory owned by an arbitrary user.

Miklos Szeredi <miklos@szeredi.hu> reports this is approach is good
enough to remove concerns about new kernels mixed with old versions
of fusermount.

A secondary motivation for restrictions here is that it removing empty
directories that have non-empty mount points on them appears to
violate the rule that rmdir can not remove empty directories.  As
Linus Torvalds pointed out this is useful for programs (like git) that
test if a directory is empty with rmdir.

Therefore this patch arranges to enforce the existing mount point
semantics for local mount namespace.

v2: Rewrote the test to be a drop in replacement for d_mountpoint
v3: Use bool instead of int as the return type of is_local_mountpoint

Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:38:54 -04:00
Al Viro 9ea459e110 delayed mntput
On final mntput() we want fs shutdown to happen before return to
userland; however, the only case where we want it happen right
there (i.e. where task_work_add won't do) is MNT_INTERNAL victim.
Those have to be fully synchronous - failure halfway through module
init might count on having vfsmount killed right there.  Fortunately,
final mntput on MNT_INTERNAL vfsmounts happens on shallow stack.
So we handle those synchronously and do an analog of delayed fput
logics for everything else.

As the result, we are guaranteed that fs shutdown will always happen
on shallow stack.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:38:53 -04:00
Al Viro 3064c3563b death to mnt_pinned
Rather than playing silly buggers with vfsmount refcounts, just have
acct_on() ask fs/namespace.c for internal clone of file->f_path.mnt
and replace it with said clone.  Then attach the pin to original
vfsmount.  Voila - the clone will be alive until the file gets closed,
making sure that underlying superblock remains active, etc., and
we can drop the original vfsmount, so that it's not kept busy.
If the file lives until the final mntput of the original vfsmount,
we'll notice that there's an fs_pin (one in bsd_acct_struct that
holds that file) and mnt_pin_kill() will take it out.  Since
->kill() is synchronous, we won't proceed past that point until
these files are closed (and private clones of our vfsmount are
gone), so we get the same ordering warranties we used to get.

mnt_pin()/mnt_unpin()/->mnt_pinned is gone now, and good riddance -
it never became usable outside of kernel/acct.c (and racy wrt
umount even there).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:09 -04:00
Al Viro 215752fce3 acct: get rid of acct_list
Put these suckers on per-vfsmount and per-superblock lists instead.
Note: right now it's still acct_lock for everything, but that's
going to change.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:08 -04:00
Al Viro c7999c3627 reduce m_start() cost...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:09 -04:00
Al Viro 38129a13e6 switch mnt_hash to hlist
fixes RCU bug - walking through hlist is safe in face of element moves,
since it's self-terminating.  Cyclic lists are not - if we end up jumping
to another hash chain, we'll loop infinitely without ever hitting the
original list head.

[fix for dumb braino folded]

Spotted by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30 19:18:51 -04:00
Al Viro 0818bf27c0 resizable namespace.c hashes
* switch allocation to alloc_large_system_hash()
* make sizes overridable by boot parameters (mhash_entries=, mphash_entries=)
* switch mountpoint_hashtable from list_head to hlist_head

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30 19:18:49 -04:00
Eric W. Biederman 260a459d2e vfs: Is mounted should be testing mnt_ns for NULL or error.
A bug was introduced with the is_mounted helper function in
commit f7a99c5b7c
Author: Al Viro <viro@zeniv.linux.org.uk>
Date:   Sat Jun 9 00:59:08 2012 -0400

    get rid of ->mnt_longterm

    it's enough to set ->mnt_ns of internal vfsmounts to something
    distinct from all struct mnt_namespace out there; then we can
    just use the check for ->mnt_ns != NULL in the fast path of
    mntput_no_expire()

    Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The intent was to test if the real_mount(vfsmount)->mnt_ns was
NULL_OR_ERR but the code is actually testing real_mount(vfsmount)
and always returning true.

The result is d_absolute_path returning paths it should be hiding.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-26 08:26:42 -05:00
Al Viro 48a066e72d RCU'd vfsmounts
* RCU-delayed freeing of vfsmounts
* vfsmount_lock replaced with a seqlock (mount_lock)
* sequence number from mount_lock is stored in nameidata->m_seq and
used when we exit RCU mode
* new vfsmount flag - MNT_SYNC_UMOUNT.  Set by umount_tree() when its
caller knows that vfsmount will have no surviving references.
* synchronize_rcu() done between unlocking namespace_sem in namespace_unlock()
and doing pending mntput().
* new helper: legitimize_mnt(mnt, seq).  Checks the mount_lock sequence
number against seq, then grabs reference to mnt.  Then it rechecks mount_lock
again to close the race and either returns success or drops the reference it
has acquired.  The subtle point is that in case of MNT_SYNC_UMOUNT we can
simply decrement the refcount and sod off - aforementioned synchronize_rcu()
makes sure that final mntput() won't come until we leave RCU mode.  We need
that, since we don't want to end up with some lazy pathwalk racing with
umount() and stealing the final mntput() from it - caller of umount() may
expect it to return only once the fs is shut down and we don't want to break
that.  In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do
full-blown mntput() in case of mount_lock sequence number mismatch happening
just as we'd grabbed the reference, but in those cases we won't be stealing
the final mntput() from anything that would care.
* mntput_no_expire() doesn't lock anything on the fast path now.  Incidentally,
SMP and UP cases are handled the same way - no ifdefs there.
* normal pathname resolution does *not* do any writes to mount_lock.  It does,
of course, bump the refcounts of vfsmount and dentry in the very end, but that's
it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-09 00:16:19 -05:00
Al Viro 474279dc0f split __lookup_mnt() in two functions
Instead of passing the direction as argument (and checking it on every
step through the hash chain), just have separate __lookup_mnt() and
__lookup_mnt_last().  And use the standard iterators...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:35:00 -04:00
Al Viro 719ea2fbb5 new helpers: lock_mount_hash/unlock_mount_hash
aka br_write_{lock,unlock} of vfsmount_lock.  Inlines in fs/mount.h,
vfsmount_lock extern moved over there as well.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:59 -04:00
Al Viro aba809cf09 namespace.c: get rid of mnt_ghosts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:58 -04:00
Al Viro 84d17192d2 get rid of full-hash scan on detaching vfsmounts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:52 -04:00
Eric W. Biederman 98f842e675 proc: Usable inode numbers for the namespace file descriptors.
Assign a unique proc inode to each namespace, and use that
inode number to ensure we only allocate at most one proc
inode for every namespace in proc.

A single proc inode per namespace allows userspace to test
to see if two processes are in the same namespace.

This has been a long requested feature and only blocked because
a naive implementation would put the id in a global space and
would ultimately require having a namespace for the names of
namespaces, making migration and certain virtualization tricks
impossible.

We still don't have per superblock inode numbers for proc, which
appears necessary for application unaware checkpoint/restart and
migrations (if the application is using namespace file descriptors)
but that is now allowd by the design if it becomes important.

I have preallocated the ipc and uts initial proc inode numbers so
their structures can be statically initialized.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-20 04:19:49 -08:00
Eric W. Biederman 771b137168 vfs: Add a user namespace reference from struct mnt_namespace
This will allow for support for unprivileged mounts in a new user namespace.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:19 -08:00
Eric W. Biederman 8823c079ba vfs: Add setns support for the mount namespace
setns support for the mount namespace is a little tricky as an
arbitrary decision must be made about what to set fs->root and
fs->pwd to, as there is no expectation of a relationship between
the two mount namespaces.  Therefore I arbitrarily find the root
mount point, and follow every mount on top of it to find the top
of the mount stack.  Then I set fs->root and fs->pwd to that
location.  The topmost root of the mount stack seems like a
reasonable place to be.

Bind mount support for the mount namespace inodes has the
possibility of creating circular dependencies between mount
namespaces.  Circular dependencies can result in loops that
prevent mount namespaces from every being freed.  I avoid
creating those circular dependencies by adding a sequence number
to the mount namespace and require all bind mounts be of a
younger mount namespace into an older mount namespace.

Add a helper function proc_ns_inode so it is possible to
detect when we are attempting to bind mound a namespace inode.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:18 -08:00
Al Viro 6ce6e24e72 get rid of magic in proc_namespace.c
don't rely on proc_mounts->m being the first field; container_of()
is there for purpose.  No need to bother with ->private, while
we are at it - the same container_of will do nicely.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:32:48 +04:00
Al Viro f7a99c5b7c get rid of ->mnt_longterm
it's enough to set ->mnt_ns of internal vfsmounts to something
distinct from all struct mnt_namespace out there; then we can
just use the check for ->mnt_ns != NULL in the fast path of
mntput_no_expire()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:32:47 +04:00
Miklos Szeredi 39f7c4db1d vfs: keep list of mounts for each superblock
Keep track of vfsmounts belonging to a superblock.  List is protected
by vfsmount_lock.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:20:12 -05:00
Al Viro be08d6d260 switch mnt_namespace ->root to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:13 -05:00
Al Viro 0226f4923f vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
rationale: that stuff is far tighter bound to fs/namespace.c than to
the guts of procfs proper.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:13 -05:00
Al Viro c63181e6b6 vfs: move fsnotify junk to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:12 -05:00
Al Viro 52ba1621de vfs: move mnt_devname
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:11 -05:00
Al Viro 1a4eeaf2a8 vfs: move mnt_list to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:11 -05:00
Al Viro 863d684f94 vfs: move the rest of int fields to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:10 -05:00
Al Viro 15169fe784 vfs: mnt_id/mnt_group_id moved
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:10 -05:00
Al Viro 143c8c91ce vfs: mnt_ns moved to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:09 -05:00
Al Viro 6776db3d32 vfs: take mnt_share/mnt_slave/mnt_slave_list and mnt_expire to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:08 -05:00
Al Viro 32301920f4 vfs: and now we can make ->mnt_master point to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:08 -05:00
Al Viro d10e8def07 vfs: take mnt_master to struct mount
make IS_MNT_SLAVE take struct mount * at the same time

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:08 -05:00
Al Viro 6b41d536f7 vfs: take mnt_child/mnt_mounts to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:06 -05:00
Al Viro 68e8a9feab vfs: all counters taken to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:06 -05:00
Al Viro a73324da7a vfs: move mnt_mountpoint to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:05 -05:00
Al Viro 0714a53380 vfs: now it can be done - make mnt_parent point to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:05 -05:00
Al Viro 3376f34fff vfs: mnt_parent moved to struct mount
the second victim...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:04 -05:00
Al Viro 676da58df7 vfs: spread struct mount - mnt_has_parent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:04 -05:00