Commit Graph

362 Commits

Author SHA1 Message Date
Robert Rosengren 306a4f3ca7 ALSA: aloop: Mark paused device as inactive
Show paused ALSA aloop device as inactive, i.e. the control
"PCM Slave Active" set as false. Notification sent upon state change.

This makes it possible for client capturing from aloop device to know if
data is expected. Without it the client expects data even if playback
is paused.

Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-27 08:00:28 +02:00
Takashi Iwai 8e6b1a72a7 ALSA: aloop: Fix access to not-yet-ready substream via cable
In loopback_open() and loopback_close(), we assign and release the
substream object to the corresponding cable in a racy way.  It's
neither locked nor done in the right position.  The open callback
assigns the substream before its preparation finishes, hence the other
side of the cable may pick it up, which may lead to the invalid memory
access.

This patch addresses these: move the assignment to the end of the open
callback, and wrap with cable->lock for avoiding concurrent accesses.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22 10:40:27 +01:00
Takashi Iwai 67a01afaf3 ALSA: aloop: Sync stale timer before release
The aloop driver tries to stop the pending timer via timer_del() in
the trigger callback and in the close callback.  The former is
correct, as it's an atomic operation, while the latter expects that
the timer gets really removed and proceeds the resource releases after
that.  But timer_del() doesn't synchronize, hence the running timer
may still access the released resources.

A similar situation can be also seen in the prepare callback after
trigger(STOP) where the prepare tries to re-initialize the things
while a timer is still running.

The problems like the above are seen indirectly in some syzkaller
reports (although it's not 100% clear whether this is the only cause,
as the race condition is quite narrow and not always easy to
trigger).

For addressing these issues, this patch adds the explicit alls of
timer_del_sync() in some places, so that the pending timer is properly
killed / synced.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22 10:34:12 +01:00
Linus Torvalds a46d3f9b1c Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "The timer departement presents:

   - A rather large rework of the hrtimer infrastructure which
     introduces softirq based hrtimers to replace the spread of
     hrtimer/tasklet combos which force the actual callback execution
     into softirq context. The approach is completely different from the
     initial implementation which you cursed at 10 years ago rightfully.

     The softirq based timers have their own queues and there is no
     nasty indirection and list reshuffling in the hard interrupt
     anymore. This comes with conversion of some of the hrtimer/tasklet
     users, the rest and the final removal of that horrible interface
     will come towards the end of the merge window or go through the
     relevant maintainer trees.

     Note: The top commit merged the last minute bugfix for the 10 years
     old CPU hotplug bug as I wanted to make sure that I fatfinger the
     merge conflict resolution myself.

   - The overhaul of the STM32 clocksource/clockevents driver

   - A new driver for the Spreadtrum SC9860 timer

   - A new driver dor the Actions Semi S700 timer

   - The usual set of fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  usb/gadget/NCM: Replace tasklet with softirq hrtimer
  ALSA/dummy: Replace tasklet with softirq hrtimer
  hrtimer: Implement SOFT/HARD clock base selection
  hrtimer: Implement support for softirq based hrtimers
  hrtimer: Prepare handling of hard and softirq based hrtimers
  hrtimer: Add clock bases and hrtimer mode for softirq context
  hrtimer: Use irqsave/irqrestore around __run_hrtimer()
  hrtimer: Factor out __hrtimer_next_event_base()
  hrtimer: Factor out __hrtimer_start_range_ns()
  hrtimer: Remove the 'base' parameter from hrtimer_reprogram()
  hrtimer: Make remote enqueue decision less restrictive
  hrtimer: Unify remote enqueue handling
  hrtimer: Unify hrtimer removal handling
  hrtimer: Make hrtimer_force_reprogramm() unconditionally available
  hrtimer: Make hrtimer_reprogramm() unconditional
  hrtimer: Make hrtimer_cpu_base.next_timer handling unconditional
  hrtimer: Make the remote enqueue check unconditional
  hrtimer: Use accesor functions instead of direct access
  hrtimer: Make the hrtimer_cpu_base::hres_active field unconditional, to simplify the code
  hrtimer: Make room in 'struct hrtimer_cpu_base'
  ...
2018-01-29 16:50:58 -08:00
Thomas Gleixner 303c146df1 Merge branch 'timers/urgent' into timers/core
Pick up urgent bug fix and resolve the conflict.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-27 15:35:29 +01:00
Thomas Gleixner b03bbbe08f ALSA/dummy: Replace tasklet with softirq hrtimer
The tasklet is used to defer the execution of snd_pcm_period_elapsed() to
the softirq context. Using the HRTIMER_MODE_SOFT mode invokes the timer
callback in softirq context as well which renders the tasklet useless.

[o-takashi: avoid stall due to a call of hrtimer_cancel() on a callback of hrtimer]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: alsa-devel@alsa-project.org
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-35-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16 09:51:22 +01:00
Takashi Iwai 9dd55cb419 Merge branch 'for-linus' into for-next
Back-merge to continue fixing the OSS emulation code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-09 08:49:53 +01:00
Takashi Iwai 898dfe4687 ALSA: aloop: Fix racy hw constraints adjustment
The aloop driver tries to update the hw constraints of the connected
target on the cable of the opened PCM substream.  This is done by
adding the extra hw constraints rules referring to the substream
runtime->hw fields, while the other substream may update the runtime
hw of another side on the fly.

This is, however, racy and may result in the inconsistent values when
both PCM streams perform the prepare concurrently.  One of the reason
is that it overwrites the other's runtime->hw field; which is not only
racy but also broken when it's called before the open of another side
finishes.  And, since the reference to runtime->hw isn't protected,
the concurrent write may give the partial value update and become
inconsistent.

This patch is an attempt to fix and clean up:
- The prepare doesn't change the runtime->hw of other side any longer,
  but only update the cable->hw that is referred commonly.
- The extra rules refer to the loopback_pcm object instead of the
  runtime->hw.  The actual hw is deduced from cable->hw.
- The extra rules take the cable_lock to protect against the race.

Fixes: b1c73fc8e6 ("ALSA: snd-aloop: Fix hw_params restrictions and checking")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05 16:44:16 +01:00
Takashi Iwai b088b53e20 ALSA: aloop: Fix inconsistent format due to incomplete rule
The extra hw constraint rule for the formats the aloop driver
introduced has a slight flaw, where it doesn't return a positive value
when the mask got changed.  It came from the fact that it's basically
a copy&paste from snd_hw_constraint_mask64().  The original code is
supposed to be a single-shot and it modifies the mask bits only once
and never after, while what we need for aloop is the dynamic hw rule
that limits the mask bits.

This difference results in the inconsistent state, as the hw_refine
doesn't apply the dependencies fully.  The worse and surprisingly
result is that it causes a crash in OSS emulation when multiple
full-duplex reads/writes are performed concurrently (I leave why it
triggers Oops to readers as a homework).

For fixing this, replace a few open-codes with the standard
snd_mask_*() macros.

Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com
Fixes: b1c73fc8e6 ("ALSA: snd-aloop: Fix hw_params restrictions and checking")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05 16:40:16 +01:00
Takashi Iwai 9685347aa0 ALSA: aloop: Release cable upon open error path
The aloop runtime object and its assignment in the cable are left even
when opening a substream fails.  This doesn't mean any memory leak,
but it still keeps the invalid pointer that may be referred by the
another side of the cable spontaneously, which is a potential Oops
cause.

Clean up the cable assignment and the empty cable upon the error path
properly.

Fixes: 597603d615 ("ALSA: introduce the snd-aloop module for the PCM loopback")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05 16:22:20 +01:00
Colin Ian King a4a1b73703 ALSA: drivers: make array 'names' const, reduces object code size
Don't populate array 'names' on the stack but instead make them static.
Makes the object code smaller by 50 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  21237	   9192	   1120	  31549	   7b3d	linux/sound/drivers/dummy.o

After:
   text	   data	    bss	    dec	    hex	filename
  21095	   9280	   1120	  31495	   7b07	linux/sound/drivers/dummy.o

(gcc version 7.2.0 x86_64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-29 09:28:27 +01:00
Takashi Iwai 76727c2c3b ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
 to the driver model, that's been a long time coming so thanks to Robert
 Jarzmik for his dedication there.  Due to there being some AC97 MFD
 there's a few fairly large changes in input and the MFD layer, mainly to
 the wm97xx driver.
 
 There's also some drivers/drm changes to support the new AMD Stoney
 platform, these are shared with the DRM subsystem and should be being
 merged via both.
 
 Within the subsystem the overwhelming bulk of the changes is in the
 Intel drivers which continue to need lots of cleanups and fixes, this
 release they've also gained support for their open source firmware.
 There's also some large changs in the core as Morimoto-san continues to
 mirror operations into the component level in preparation for conversion
 of drivers to that.
 
  - The AC97 bus has finally caught up with the driver model thanks to
    some dedicated and persistent work from Robert Jarzmik.
  - Continued work from Morimoto-san on moving us towards being able to
    use components for everything.
  - Lots of cleanups for the Intel platform code, including support for
    their open source audio firmware.
  - Support for scaling MCLK with sample rate in simple-card.
  - Support for AMD Stoney platform.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
 WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
 bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
 SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
 iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
 OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
 =5KBY
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.15

The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there.  Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.

There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.

Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.

 - The AC97 bus has finally caught up with the driver model thanks to
   some dedicated and persistent work from Robert Jarzmik.
 - Continued work from Morimoto-san on moving us towards being able to
   use components for everything.
 - Lots of cleanups for the Intel platform code, including support for
   their open source audio firmware.
 - Support for scaling MCLK with sample rate in simple-card.
 - Support for AMD Stoney platform.
2017-11-13 15:45:57 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Kees Cook bc47ba90b0 ALSA: drivers: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-24 21:01:16 +02:00
Takashi Iwai 07f070dda4 ALSA: vx: Put missing KERN_CONT prefix
The vx driver has a debug printk code without proper KERN_ prefix.
On recent kernels, KERN_CONT prefix is mandatory for continued output
lines.  Put it properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31 11:01:17 +02:00
Takashi Iwai 53cfa99e37 ALSA: opl3: Put missing KERN_CONT prefix
The opl3 driver has a debug printk code without proper KERN_ prefix.
On recent kernels, KERN_CONT prefix is mandatory for continued output
lines.  Put it properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31 11:01:03 +02:00
Markus Elfring 2cded8c891 ALSA: pcsp: Use common error handling code in snd_card_pcsp_probe()
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-22 17:49:21 +02:00
Arvind Yadav f95925829b ALSA: drivers: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-19 11:02:15 +02:00
Bhumika Goyal b6c0b71561 ALSA: drivers: make snd_pcm_hardware const
Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17 12:44:09 +02:00
Arvind Yadav 1491c68a22 ALSA: drivers: mpu401: constify pnp_device_id
pnp_device_id are not supposed to change at runtime. All functions
working with pnp_device_id provided by <linux/pnp.h> work with
const pnp_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17 12:42:14 +02:00
Markus Elfring f1a77dc171 ALSA: mpu401: Adjust four checks for null pointers
The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12 23:35:48 +02:00
Markus Elfring ec1f43c83b ALSA: mpu401: Use common error handling code in snd_mpu401_uart_new()
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12 23:35:24 +02:00
Markus Elfring 30b2aeb8a8 ALSA: mpu401: Delete an error message for a failed memory allocation in snd_mpu401_uart_new()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12 23:35:06 +02:00
Markus Elfring 2b223a9119 ALSA: opl3: Delete an error message for a failed memory allocation in snd_opl3_new()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12 23:34:33 +02:00
Joe Perches 6ede2b7df9 ALSA: opl4: Move inline before return type
Make the code like the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-06 09:24:17 +02:00
Takashi Iwai f03293d8fc ALSA: Fix forgotten dependency fix for tristate OSS sequencer kconfig
In the commit 3d774d5ef0 ("ALSA: seq: Allow the tristate build of
OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a
couple of places were forgotten, namely, opl3 and emux Makefile.
These contain the line like
  snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
and this doesn't work any longer as expected because snd-opl3-synth
can be built-in while CONFIG_SND_SEQUENCER_OSS=m.

This patch fixes these places to build properly for the new kconfig
dependency.  In the end, we had to use ifneq() to satisfy the
requirement.  It's a bit ugly, but lesser evil.

Fixes: 3d774d5ef0 ("ALSA: seq: Allow the tristate build of OSS emulation")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-28 08:45:07 +02:00
Takashi Iwai 111b0cdb97 ALSA: seq: Allow the modular sequencer registration
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12 08:43:33 +02:00
Takashi Iwai 0181307abc ALSA: seq: Reorganize kconfig and build
This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.

The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig.  OK, that's easy.

The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module.  The driver that requires such sequencer components select
exclusively the kconfig items.  This is more straightforward and
standard way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:10:06 +02:00
Takashi Iwai 3d774d5ef0 ALSA: seq: Allow the tristate build of OSS emulation
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.

This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in.  Essentially, it's just a few simple
changes in Kconfig and Makefile.  Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED().  But that's all.

You might wonder how about the dependency: right, it can be messy, but
it still works.  Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand.  So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:09:45 +02:00
Arvind Yadav bf83348455 ALSA: vx: vx_pcm: constify vx_pcm_playback_ops and vx_pcm_capture_ops.
File size before:
   text	   data	    bss	    dec	    hex	filename
   7126	    240	      0	   7366	   1cc6	sound/drivers/vx/vx_pcm.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   7382	      0	      0	   7382	   1cd6	sound/drivers/vx/vx_pcm.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 09:20:37 +02:00
Arvind Yadav 642b7589da ALSA : pcsp: pcsp_lib: constify snd_pcsp_playback_ops
File size before:
   text	   data	    bss	    dec	    hex	filename
   2027	    168	      1	   2196	    894	sound/drivers/pcsp/pcsp_lib.o

File size After:
   text	   data	    bss	    dec	    hex	filename
   2155	     40	      1	   2196	    894	sound/drivers/pcsp/pcsp_lib.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 09:19:41 +02:00
Takashi Iwai d53611d21e ALSA: dummy: Convert to new PCM copy ops
It's a dummy ops, so just replacing it.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-02 19:37:56 +02:00
Bhumika Goyal 905e46acd3 ALSA: declare snd_kcontrol_new structures as const
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:

@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};

@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)

@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p

@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;

Cross compiled these files:
sound/aoa/codecs/tas.c - powerpc
sound/mips/{hal2.c/sgio2audio.c} - mips
sound/ppc/{awacs.c/beep.c/tumbler.c} - powerpc
sound/soc/sh/siu_dai.c - sh
Could not find an architecture to compile sound/sh/aica.c.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-30 10:29:25 +02:00
Takashi Iwai 3ac8226fc8 ALSA: opl3: Kill unused set_fs()
snd_enter_user() and snd_leave_user() that call set_fs() are the dead
code in opl3 driver.  Let's rip them off.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-17 07:13:12 +02:00
Takashi Iwai 2e2d4cb450 ALSA: opl4: Use IS_REACHABLE()
Rewrite the complex ifdef condition with IS_REACHABLE().
The ifdef in opl4_local.h was without defined(MODLE) check, but this
is likely the oversight.  Use IS_REACHABLE() here as well.

Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-17 07:13:05 +02:00
Linus Torvalds 291b38a756 Annotation of module parameters that specify device settings
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWPiW6vSw1s6N8H32AQLOrw/+NTqGf7bjq+64YKS6NfR0XDgE+wNJltGO
 ck7zJW3NHIg76RNu8s0I9xg5aVmwizz3Z5DGROZquaolnezux4tQihZ3AFyxIzLc
 +Y3WHYagcML7yFfjl/WznCLRD5EW3yPln4lCvQO0nW/xICRYeRI057JaIbi2Dtek
 BhcXt3c4AjXDLdYJkgtHV3p2R2mt8hcdFdWqqx6s7JaIThZNRGNzxAgtbcB9k5IW
 HVG9ZEIL73VBYWHrYivzjHYF5rBnNCPt87eOwDQeTOSkhv8te+u9k+bH8vxZw1T0
 XUtDrLBndKiuVo2GUfLkkF8LItx3Q9eLCJYy0joaIliyPqTEsPx9KjQ+Af0cxS9s
 ZPCZ5SYf96stKmDeL5xaMfrAmeyVHJ4lc4JTOqdzbIT8blsOSfYO/03p0ALShSDv
 /RQLaKGlf8Bjoy8PwKFcXb4sIDufcd/U1Av/EMFXxOfgN/u2JUkGKq6EaIM5B68L
 fHPje+aR9VNELPmPjwNOWtmN4I79EH3EItQf7zv0KG+UeKhcHLx/EAcSJ3ZRKEkH
 Lathg7pPOEJGArPiVO79TZzBG01ADn1aiwv65XObMzNZ+54xI/mN/Y1DNF/kL5jU
 XzvNzEjFt8mwMIZGVNdAt4+pDyMfIZGZSyUkSRKFnaQZMIvQrfQIU9RLBYLX5eOx
 +/p0VkIwDpg=
 =lbS7
 -----END PGP SIGNATURE-----

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...
2017-05-10 19:13:03 -07:00
David Howells b11ce420c5 Annotate hardware config module parameters in sound/drivers/
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in sound/drivers/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
cc: Jaroslav Kysela <perex@perex.cz>
cc: alsa-devel@alsa-project.org
2017-04-20 12:02:32 +01:00
Mihai Burduselu a65895e0ee ALSA: vx: remove 'out of memory' message
Reported by checkpatch.pl

Signed-off-by: Mihai Burduselu <michelcatalin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 07:54:33 +01:00
Takashi Iwai c36f486d7b ALSA: drivers: Constify snd_rawmidi_ops
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi,
we can constify the definitions.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-12 12:50:06 +01:00
Takashi Iwai ed3c177d96 ALSA: vx: Don't try to update capture stream before running
The update of stream costs significantly, and we should avoid it
unless the stream really has started.  Check pipe->running flag
instead of pipe->prepared.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-04 18:01:35 +01:00
Takashi Iwai 874e1f6fad ALSA: vx: Fix possible transfer overflow
The pseudo DMA transfer codes in VX222 and VX-pocket driver have a
slight bug where they check the buffer boundary wrongly, and may
overflow.  Also, the zero sample count might be handled badly for the
playback (although it shouldn't happen in theory).  This patch
addresses these issues.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-04 18:01:35 +01:00
Thomas Gleixner 8b0e195314 ktime: Cleanup ktime_set() usage
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 17:21:22 +01:00
Fabian Frederick db0717da2a ALSA: opl3: don't opencode IS_REACHABLE()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-12 10:11:36 +01:00
Takashi Iwai d5dbbe6569 ALSA: dummy: Fix a use-after-free at closing
syzkaller fuzzer spotted a potential use-after-free case in snd-dummy
driver when hrtimer is used as backend:
> ==================================================================
> BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr ffff88005e5b6f68
>  Read of size 8 by task syz-executor/8984
> =============================================================================
> BUG kmalloc-192 (Not tainted): kasan: bad access detected
> -----------------------------------------------------------------------------
>
> Disabling lock debugging due to kernel taint
> INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=18446705582212484632
> ....
> [<      none      >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464
> ....
> INFO: Freed in 0xfffd8e09 age=18446705496313138713 cpu=2164287125 pid=-1
> [<      none      >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481
> ....
> Call Trace:
>  [<ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333
>  [<     inline     >] rb_set_parent include/linux/rbtree_augmented.h:111
>  [<     inline     >] __rb_erase_augmented include/linux/rbtree_augmented.h:218
>  [<ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427
>  [<ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86
>  [<ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903
>  [<     inline     >] remove_hrtimer kernel/time/hrtimer.c:945
>  [<ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046
>  [<ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066
>  [<ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417
>  [<ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507
>  [<ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106
>  [<ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956
>  [<ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974
>  [<     inline     >] snd_pcm_stop sound/core/pcm_native.c:1139
>  [<ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784
>  [<ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805
>  [<ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976
>  [<ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020
>  [<ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693
>  [<ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483
>  .....

A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which
is called certainly before other blocking ops.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-24 15:18:32 +02:00
Linus Torvalds 814a2bf957 Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...
2016-03-18 19:26:54 -07:00
Joonsoo Kim 505f6d22db sound: query dynamic DEBUG_PAGEALLOC setting
We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC.  This patch changes the code to query
whether it is enabled or not in runtime.

[akpm@linux-foundation.org: export _debug_pagealloc_enabled to modules]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Sudip Mukherjee 03367bf7fd ALSA: portman2x4: fix NULL pointer dereference
While registering pardev, the irq_func was also registered. As a result
when we tried to probe for the card, an interrupt was generated and in
the ISR we tried to dereference private_data. But private_data is still
NULL as we have not yet done portman_create(). Lets probe for the device
after card is created.

Fixes: e6a1b7e880 ("ALSA: portman2x4 - use new parport device model")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-02 16:23:24 +01:00
Sudip Mukherjee 0bbf7e025f ALSA: mts64: fix NULL pointer dereference
While registering pardev, the irq_func was also registered. As a
result when we tried to probe for the card, an interrupt was generated
and in the ISR we tried to dereference private_data. But private_data
is still NULL as we have not yet done snd_mts64_create(). Lets probe
for the card after mts64 is created.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 94a573500d ("ALSA: mts64: use new parport device model")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-29 13:23:46 +01:00
Sudip Mukherjee 94a573500d ALSA: mts64: use new parport device model
Modify mts64 driver to use the new parallel port device model.
The advantage of using the device model is that the driver gets binded
to the hardware, we get the feature of hotplug, we can bind/unbind the
driver at runtime.
The changes are in the way the driver gets registered with the parallel
port subsystem and the temporary device to probe mts64 card is removed
and mts64_probe() is used in the probe callback.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-22 15:01:43 +01:00
Sudip Mukherjee e6a1b7e880 ALSA: portman2x4 - use new parport device model
Modify portman driver to use the new parallel port device model.
The advantage of using the device model is that the device gets binded
to the hardware, we get the feature of hotplug, we can bind/unbind
the driver at runtime.
The changes are in the way the driver gets registered with the
parallel port subsystem and the temporary device to probe portman card
is removed and portman_probe() is used in the probe callback.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-18 11:19:15 +01:00