Commit Graph

23 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Takashi Iwai 124751d5e6 ALSA: usb-audio: Kill stray URB at exiting
USB-audio driver may leave a stray URB for the mixer interrupt when it
exits by some error during probe.  This leads to a use-after-free
error as spotted by syzkaller like:
  ==================================================================
  BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0
  Call Trace:
   <IRQ>
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x292/0x395 lib/dump_stack.c:52
   print_address_description+0x78/0x280 mm/kasan/report.c:252
   kasan_report_error mm/kasan/report.c:351
   kasan_report+0x23d/0x350 mm/kasan/report.c:409
   __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430
   snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490
   __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
   ....

  Allocated by task 1484:
   save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
   save_stack+0x43/0xd0 mm/kasan/kasan.c:447
   set_track mm/kasan/kasan.c:459
   kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
   kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
   kmalloc ./include/linux/slab.h:493
   kzalloc ./include/linux/slab.h:666
   snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540
   create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516
   snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
   create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59
   snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
   usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618
   ....

  Freed by task 1484:
   save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
   save_stack+0x43/0xd0 mm/kasan/kasan.c:447
   set_track mm/kasan/kasan.c:459
   kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
   slab_free_hook mm/slub.c:1390
   slab_free_freelist_hook mm/slub.c:1412
   slab_free mm/slub.c:2988
   kfree+0xf6/0x2f0 mm/slub.c:3919
   snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244
   snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250
   __snd_device_free+0x1ff/0x380 sound/core/device.c:91
   snd_device_free_all+0x8f/0xe0 sound/core/device.c:244
   snd_card_do_free sound/core/init.c:461
   release_card_device+0x47/0x170 sound/core/init.c:181
   device_release+0x13f/0x210 drivers/base/core.c:814
   ....

Actually such a URB is killed properly at disconnection when the
device gets probed successfully, and what we need is to apply it for
the error-path, too.

In this patch, we apply snd_usb_mixer_disconnect() at releasing.
Also introduce a new flag, disconnected, to struct usb_mixer_interface
for not performing the disconnection procedure twice.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-10 14:17:09 +02:00
Takashi Iwai 0f174b3525 ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
C-Media devices (at least some models) mute the playback stream when
volumes are set to the minimum value.  But this isn't informed via TLV
and the user-space, typically PulseAudio, gets confused as if it's
still played in a low volume.

This patch adds the new flag, min_mute, to struct usb_mixer_elem_info
for indicating that the mixer element is with the minimum-mute volume.
This flag is set for known C-Media devices in
snd_usb_mixer_fu_apply_quirk() in turn.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17 17:52:16 +02:00
Mauro Carvalho Chehab c89178f57a [media] Revert "[media] sound/usb: Use Media Controller API to share media resources"
Unfortunately, this patch caused several regressions at au0828 and
snd-usb-audio, like this one:
	https://bugzilla.kernel.org/show_bug.cgi?id=115561

It also showed several troubles at the MC core that handles pretty
poorly the memory protections and data lifetime management.

So, better to revert it and fix the core before reapplying this
change.

This reverts commit aebb2b89bf ("[media] sound/usb: Use Media
Controller API to share media resources")'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-31 15:02:33 -03:00
Shuah Khan aebb2b89bf [media] sound/usb: Use Media Controller API to share media resources
Change ALSA driver to use Media Controller API to share media resources
with DVB and V4L2 drivers on a AU0828 media device. Media Controller
specific initialization is done after sound card is registered. ALSA
creates Media interface and entity function graph nodes for Control,
Mixer, PCM Playback, and PCM Capture devices.

snd_usb_hw_params() will call Media Controller enable source handler
interface to request the media resource. If resource request is
granted, it will release it from snd_usb_hw_free(). If resource is
busy, -EBUSY is returned.

Media specific cleanup is done in usb_audio_disconnect().

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03 15:01:13 -03:00
Julian Scheel bc18e31c30 ALSA: usb-audio: Fix parameter block size for UAC2 control requests
USB Audio Class version 2.0 supports three different parameter block sizes for
CUR requests, which are 1 byte (5.2.3.1 Layout 1 Parameter Block), 2 bytes
(5.2.3.2 Layout 2 Parameter Block) and 4 bytes (5.2.3.3 Layout 3 Parameter
Block). Use the correct size according to the specific control as it was
already done for UACv1. The allocated block size for control requests is
increased to support the 4 byte worst case.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-14 16:26:50 +02:00
Takashi Iwai 2bfb14c3b8 ALSA: usb-audio: Add Xonar U1 resume support
This time it's about Xonar U1: add the proper resume support for
"Digital Playback Switch" element.

Also, the status is moved into kcontrol private_value from
usb_mixer_interface struct field.  One more cut.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:58:01 +01:00
Takashi Iwai 9cf3689bfe ALSA: usb-audio: Add audigy2nx resume support
Rewrite the code to handle LEDs on audigy2nx and co for supporting the
proper resume.  A new internal helper function
add_single_ctl_with_resume() is introduced to manage the
usb_mixer_elem_list more easily.

Also while we're at it, move audigy2nx_leds[] in usb_mixer_interface
struct into the private_value of each kctl, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:57:46 +01:00
Takashi Iwai 3360b84b8e ALSA: usb-audio: Allow quirks to handle own resume and proc dump
So far, we blindly assumed that the all usb-audio mixer elements
follow the standard and apply the standard resume method for the
registered elements in the id_elems[] list.  However, some quirks
really need the own resume and it's incomplete for now.

This patch enhances the resume handling in two folds:
- split some fields in struct usb_mixer_elem_info into a smaller
  header struct (usb_mixer_elem_list) for keeping the minimal
  information in the linked-list; the usb_mixer_elem_info embeds this
  header struct instead
- add resume and dump callbacks to usb_mixer_elem_list struct to allow
  quirks providing the own methods

For the standard mixer elements, these new callbacks are set to the
standard ones as default, thus there is no functional change by this
patch yet.

The dump and resume callbacks are typedef'ed for ease of later patches
using arrays of such function pointers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:56:58 +01:00
Chris J Arges eef9045160 ALSA: usb-audio: make set_*_mix_values functions public
Make the functions set_cur_mix_value and get_cur_mix_value accessible by files
that include mixer.h. In addition make usb_mixer_elem_free accessible.
This allows reuse of these functions by mixers that may require quirks.

The following summarizes the renamed functions:
  - set_cur_mix_value -> snd_usb_set_cur_mix_value
  - get_cur_mix_value -> snd_usb_get_cur_mix_value
  - usb_mixer_elem_free -> snd_usb_mixer_elem_free

Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-13 07:32:02 +01:00
Chris J Arges f41d6049d1 ALSA: usb-audio: Add private_data pointer to usb_mixer_elem_info
Add a private_data pointer to usb_mixer_elem_info to allow other mixer
implementations to extend the structure as necessary.

Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-13 07:31:52 +01:00
Takashi Iwai a6cece9d81 ALSA: usb-audio: Pass direct struct pointer instead of list_head
Some functions in mixer.c and endpoint.c receive list_head instead of
the object itself.  This is not obvious and rather error-prone.  Let's
pass the proper object directly instead.

The functions in midi.c still receive list_head and this can't be
changed since the object definition isn't exposed to the outside of
midi.c, so left as is.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04 15:09:10 +01:00
Takashi Iwai 400362f1d8 ALSA: usb-audio: Resume mixer values properly
Implement reset_resume callback so that the mixer values are properly
restored.  Still no boot quirks are called, so it might not work well
on some devices.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-03 09:51:34 +01:00
Eldad Zack 9f81410592 ALSA: usb-audio: add control index offset
Currently, channel IDs exceeding 31 (0x1f) cannot be used.
The channel ID is derived from the cmask. Extending cmask
to a 64-bit type would only allow it to go up to 63 (0x3f).
Some devices have channel IDs exceeding that as well.
To address that, add an offset to the mixer element which
is then accounted for in the UAC set/get functions.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 08:43:12 +01:00
Felix Homann 285de9c08b ALSA: usb-audio: Rename and export mixer_vol_tlv
Rename mixer_vol_tlv to snd_usb_mixer_vol_tlv and export it to make
it reuseable in mixer_quirks.c.

Signed-off-by: Felix Homann <linuxaudio@showlabor.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 08:01:27 +02:00
Daniel Mack 1faa5d07a9 ALSA: snd-usb: operate on given mixer interface only
When creating the mixers for an USB audio device, the current code looks
at the host interface stored in mixer->chip->ctrl_if. Change this and
rather keep a local pointer to the interface that was given when
snd_usb_create_mixer() was called.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com>
Reported-by: Lean-Yves LENHOF <jean-yves@lenhof.eu.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04 16:24:10 +02:00
Daniel Mack 9e38658f70 ALSA: usb-audio: export snd_usb_feature_unit_ctl
In order to allow quirks functions to hook up to the standard feature
unit op tables, this patch exports a pointer to the struct that is used
internally.

That way, all the code handling the control can be kept private, and
external code can reference the symbol to re-use it.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-25 09:36:20 +02:00
Daniel Mack ef9d597089 ALSA: usb-audio: rework add_control_to_empty()
This patch renames add_control_to_empty() to snd_usb_mixer_add_control()
and exports it, so the quirks functions can make use of it.

Also, as "struct mixer_build" is private to mixer.c, rewrite the
function to take an argument of type "struct usb_mixer_interface"
instead.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-25 09:34:34 +02:00
Oliver Neukum edf7de31c2 ALSA: usbaudio: fix suspend/resume
- ESHUTDOWN must be correctly handled
- the optional interrupt endpoint's URB must be stopped and restarted

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-11 14:51:51 +01:00
Daniel Mack 3d8d4dcfd4 ALSA: usb-audio: simplify control interface access
As the control interface is now carried in struct snd_usb_audio, we can
simplify the API a little and also drop the private ctrlif field from
struct usb_mixer_interface.

Also remove a left-over function prototype in pcm.h.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:10:23 +02:00
Daniel Mack a6a3325913 ALSA: usb-audio: support partially write-protected UAC2 controls
So far, UAC2 controls are marked read-only if any of the channels are
marked read-only in the descriptors. Change this behaviour and

 - mark them writeable unless all channels are read-only
 - store the read-only mask in usb_mixer_elem_info and
 - check the mask again in set_cur_mix_value(), and bail out for
   write-protected channels.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:15:57 +02:00
Daniel Mack 23caaf19b1 ALSA: usb-mixer: Add support for Audio Class v2.0
USB Audio Class v2.0 compliant devices have different descriptors and a
different way of setting/getting min/max/res/cur properties. This patch
adds support for them.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:21:26 +01:00
Daniel Mack f0b5e634ff ALSA: usbmixer: rename usbmixer.[ch] -> mixer.[ch]
For clearer namespace, also rename usbmixer_maps.c -> mixer_maps.c

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:20:49 +01:00