Commit Graph

492 Commits

Author SHA1 Message Date
Mandar Joshi ca8dc34eaf ALSA: usb-audio - Support for Power/Status LED on Creative USB X-Fi S51
This patch adds support for Power/Status LED on Creative USB X-Fi S51.
There is just one LED on the device. The LED can either be On or it
can be set to Blink. There doesn't seem to be a way to switch it off.
The control message to change LED status is similar to that of
audigy2nx except that the index is to be set to 0 and value is 1 for
Blink and 0 for On.

The 'Power LED' control in alsamixer when muted will cause the LED to
Blink continuously. When unmuted  the LED will stay On. The Creative
driver under Windows sets the LED to blink whenever audio is muted.
This LED can be treated as the CMSS LED but I figured since there is
just one LED, it should be treated as the Power LED. Is that alright?

I've also changed the comment "Usb X-Fi" to "Usb X-Fi S51" as there
are other external X-Fi devices from Creative like Usb X-Fi Go and
Xmod. The volume knob and LED support patch doesn't apply to them.

Signed-off-by: Mandar Joshi <emailmandar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-02 12:40:11 +01:00
Jesper Juhl 8a8d56b2a2 ALSA: usb - driver neglects kmalloc return value check and may deref NULL
sound/usb/pcm.c::snd_usb_pcm_check_knot() fails to check the return value
from kmalloc() and may end up dereferencing a null pointer.
The patch below (compile tested only) should take care of that little
problem.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-01 10:23:39 +01:00
Clemens Ladisch 89e1e66d6b ALSA: usb-audio: automatically detect feedback format
There are two USB Audio Class specifications (v1 and v2), but neither of
them clearly defines the feedback format for high-speed UAC v1 devices.
Add to this whatever the Creative and M-Audio firmware writers have been
smoking, and it becomes impossible to predict the exact feedback format
used by a particular device.

Therefore, automatically detect the feedback format by looking at the
magnitude of the first received feedback value.

Also, this allows us to get rid of some special cases for E-Mu devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-27 09:17:41 +02:00
Mandar Joshi 97c44b2dbd ALSA: usb - Creative USB X-Fi volume knob support
Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
The action of the volume knob is received by lirc when its using the
alsa_usb driver.

Signed-off-by: Mandar Joshi <emailmandar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-24 12:35:59 +02:00
Clemens Ladisch c7f572168f ALSA: usb-audio: add Novation Launchpad support
Add a quirk entry for the Novation Launchpad USB MIDI controller.

QUIRK_MIDI_FASTLANE gets renamed to *_RAW_BYTES because this quirk type
is now shared by different devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Jakob Flierl <jakob.flierl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-22 18:48:40 +02:00
Andrea Gelmini fa2eb005eb sound: fixed typos
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-17 10:08:27 +02:00
Nicolas Kaiser 1d2019fb6b ALSA: sound/usb/usx2y: simplify conditional
Simplify conditional: (a || (!a && b)) => (a || b)

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-11 13:50:10 +02:00
Clemens Ladisch 422fdc318e ALSA: usb-audio: add more Yamaha USB MIDI devices
Add quirks for more devices (according to driver V.3.0.4-2).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:13 +02:00
Dan Carpenter 26e34e9e15 ALSA: usb/mixer: remove bogus cast
"uinfo->value.enumerated.item" is an unsigned int.  If it's negative
when we do the comparison:
	if ((int)uinfo->value.enumerated.item >= cval->max)
then we would read past the end of the array on the next line.

I also changed the strcpy() to strlcpy() out of paranoia.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-16 22:50:51 +02:00
Takashi Iwai 1a4e34e67c ALSA: usb-audio - Fix an unused-variable compile warning
Used only when CONFIG_SND_DEBUG=y
  sound/usb/mixer.c: In function 'get_min_max':
  sound/usb/mixer.c:762: warning: unused variable 'chip'

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-16 07:44:39 +02:00
Daniel Mack 15c5ab6070 ALSA: snd-usb-caiaq: Add support for Traktor Kontrol S4
This patch adds support for the new Traktor Kontrol S4 by Native
Instruments. It features a new audio data streaming model, MIDI
in and out ports, a huge number of 174 dimmable LEDs, 96 buttons
and 46 absolute encoder axis, including some rotary encoders.

All features are supported by the driver now.

Did some code refactoring along the way.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-10 11:08:39 +02:00
Daniel Mack 6008fd5aa4 ALSA: snd-usb-caiaq: drop version number
Let git do the job.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-10 11:08:29 +02:00
Takashi Iwai c8bdfacb63 Merge branch 'fix/misc' into topic/misc 2010-09-09 10:51:45 +02:00
Takashi Iwai 76195fb096 ALSA: usb - Release capture substream URBs properly
Due to the wrong "return" in the loop, a capture substream won't be
released at disconnection properly if the device is capture only and has
no playback substream.  This caused Oops occasionally at the device
reconnection.

Reported-by: Kim Minhyoung <minhyoung.kim@lge.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-08 08:27:02 +02:00
Takashi Iwai 68885a3ff3 Merge branch 'fix/misc' into topic/misc 2010-09-03 22:38:52 +02:00
Clemens Ladisch a2acad8298 ALSA: usb-audio: fix detection of vendor-specific device protocol settings
The Audio Class v2 support code in 2.6.35 added checks for the
bInterfaceProtocol field.  However, there are devices (usually those
detected by vendor-specific quirks) that do not have one of the
predefined values in this field, which made the driver reject them.

To fix this regression, restore the old behaviour, i.e., assume that
a device with an unknown bInterfaceProtocol field (other than
UAC_VERSION_2) has more or less UAC-v1-compatible descriptors.

[compile warning fixes by tiwai]

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-03 22:36:39 +02:00
Clemens Ladisch 7b28079b32 ALSA: usb-audio: add BOSS ME-25 support
Add a quirk to make the BOSS ME-25 work.
Many thanks to Kees van Veen.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-03 22:24:22 +02:00
Clemens Ladisch 9d0c91938e ALSA: usb-audio: add Roland A-PRO support
Add a quirk for the Roland/Cakewalk A-300PRO/A-500PRO/A-800PRO keyboards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-03 22:24:19 +02:00
Clemens Ladisch aa70201fdc ALSA: usb-audio: add Edirol PCR-1 PCM support
Add a quirk for the other logical device of the PCR-1 so that not only
the MIDI interface but also the audio interface works.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-03 22:24:16 +02:00
Daniel Mack 7b6717e144 ALSA: usb-audio: Assume first control interface is for audio
For devices with more than one control interface, let's assume the first
one contains the audio controls. Unfortunately, there is no field in any
of the descriptors to tell us whether a control interface is for audio
or MIDI controls, so a better check is not easy to implement.

On a composite device with audio and MIDI functions, for example, the
code currently overwrites chip->ctrl_intf, causing operations on the
control interface to fail if they are issued after the device probe.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-02 11:58:37 +02:00
Clemens Ladisch 65f04443c9 ALSA: usb-audio: fix Fast Track Ultra (8R) 44.1 sample rates
The M-Audio Fast Track Ultra series devices did not play sound correctly
at 44.1/88.2 kHz. Changing the output endpoint attribute to adaptive
fixes this.

Signed-off-by: Felix Homann <fexpop@web.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-02 11:52:03 +02:00
Takashi Iwai e7cfbea9cb Merge branch 'fix/misc' into topic/misc 2010-08-18 15:17:52 +02:00
Takashi Iwai 6ab561c8aa Merge branch 'topic/isa' into topic/misc 2010-08-18 15:17:30 +02:00
Linus Torvalds 1b68c9596c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/usb/format: silence uninitialized variable warnings
  MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices
  MAINTAINERS: Make Wolfson entry also cover CODEC drivers
  ASoC: Only tweak WM8994 chip configuration on devices up to rev D
  ASoC: Optimise DSP performance for WM8994
  ALSA: hda - Fix dynamic ADC change working again
  ALSA: hda - Restrict PCM parameters per ELD information over HDMI
  sound: oss: sh_dac_audio.c removed duplicated #include
2010-08-15 11:22:00 -07:00
Dan Carpenter 38d7b08f37 ALSA: sound/usb/format: silence uninitialized variable warnings
Gcc complains that ret might be used uninitialized:

sound/usb/format.c: In function ‘snd_usb_parse_audio_format’:
sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:354: note: ‘ret’ was declared here
sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:414: note: ‘ret’ was declared here

I suppose it could be uninitialized if there is ever a UAC_VERSION_3
released. Anyway this patch is worthwhile if only to silence the gcc
warning.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-15 14:28:20 +02:00
Paul Zimmerman 4f4e8f6989 ALSA: usb: USB3 SuperSpeed sound support
This is V2 of the patch, after feedback from Clemens and Daniel.

This patch adds SuperSpeed support to the USB drivers under sound/. It adds
tests for USB_SPEED_SUPER to the appropriate places that check for the USB
speed.

This patch has been tested with our SS USB3 device emulating a set of Yamaha
speakers and a Logitech microphone, but with the descriptors modified to add
USB3 support. It has also been tested with the real speakers and microphone,
to make sure that USB2 devices still work.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-14 10:30:08 +02:00
Linus Torvalds faa38b5e0e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...
2010-08-07 17:07:31 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
John S Gruber dd2f8c2f81 ALSA: usb - Correct audio problem for Hauppage HVR-850 and others rel. to urb data align
Match usb ids in usb/quirks-table.h for some Hauppage HVR-950Q models
and for the HVR850 model to those ids at the end of au0828-cards.c

Thanks to nhJm449 for pointing out the problem.

Signed-off-by: John S Gruber <JohnSGruber@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-02 09:12:59 +02:00
Uwe Kleine-König a7ce2e0d04 fix comnment/printk typos concerning "empty"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-12 18:03:50 +02:00
Clemens Ladisch d32d552e66 ALSA: usb-audio: silence a superfluous warning
It is not advisable to print a warning when a device does not support
setting the sample rate because this is perfectly valid for devices with
a single rate or where rates are implicitly changed by selecting another
alternate setting.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-09 15:08:12 +02:00
Takashi Iwai b415ec7041 ALSA: usb - Fix compile error with CONFIG_SND_DEBUG_VERBOSE=y
Replaced the forgotten cval->mixer->ctrlif.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-24 08:07:28 +02:00
Daniel Mack 3d8d4dcfd4 ALSA: usb-audio: simplify control interface access
As the control interface is now carried in struct snd_usb_audio, we can
simplify the API a little and also drop the private ctrlif field from
struct usb_mixer_interface.

Also remove a left-over function prototype in pcm.h.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:10:23 +02:00
Daniel Mack 157a57b6fa ALSA: usb-audio: move and add some comments
Also add a list of open topics.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:09:50 +02:00
Daniel Mack 21af7d8c0c ALSA: usb-midi: whitespace fixes
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:09:38 +02:00
Daniel Mack 69da9bcb98 ALSA: usb-audio: unify UAC macros and struct names
Get rid of the last occurances of _v1 suffixes, and move the version
number right after the "uac" string. Now things are consitent again.

Sorry for the forth and back, but it just looks much nicer this way.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:09:26 +02:00
Daniel Mack f22aa94908 ALSA: usb-audio: clean up includes in clock.c
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:09:14 +02:00
Alexey Fisher a5c7d797dc ALSA: usb-audio - Add volume resolution quirk for some Logitech webcams
Some programs like Skype trying to set capture volume automatically.
Normally it will tray, carefully step by step lover or higher, set the volume.
In real word it work not really well, because devises and vendors lie about
real audio settings.
For example most Logitech webcams have 6400 or 3500 steps for capture volume.
They do not tell that actual resolution is 384. So we have only 7 or 18 real
steps. In this patch I set real resolution only for tested devices.

Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:02:07 +02:00
Jiri Slaby 272cbc98cf ALSA: usb/endpoint, fix dangling pointer use
Stanse found that in snd_usb_parse_audio_endpoints, there is a
dangling pointer dereference. When snd_usb_parse_audio_format fails,
fp is freed, and continue invoked. On the next loop, there is
"fp && fp->altsetting == 1 && fp->channels == 1" test, but fp is set
from the last iteration (but is bogus) and thus ilegally dereferenced.

Set fp to NULL before "continue".

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-21 17:07:58 +02:00
Daniel Mack e8bdb6bbab ALSA: usb-audio: fix UAC2 control value queries
For RANGE requests, we should only query as much bytes as we're in fact
interested in.

For CUR requests, we shouldn't confuse the firmware with an overlong
request but just ask for 2 bytes.

This might need fixing in the future as it's not entirely clear when to
dispatch 1-byte, 2-byte and 4-byte request blocks. For now, we assume
everything is coded in 16bit - this works for all firmware
implementations I've seen.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Alex Lee <alexlee188@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-11 18:06:35 +02:00
Daniel Mack 67c103664a ALSA: usb-audio: parse UAC2 sample rate ranges correctly
A device may report its supported sample rates in ranges rather than in
discrete triplets. The code used to only parse the MIN field instead of
properly paying attention to the MAX and RES values.

Also, handle RES values of 1 correctly and announce a continous sample
rate range in this case.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Alex Lee <alexlee188@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-11 18:06:12 +02:00
Daniel Mack 11bcbc443a ALSA: usb-audio: fix control messages for USB_RECIP_INTERFACE
Control messages directed to an interface must have the interface number
set in the lower 8 bits of wIndex. This wasn't done correctly for some
clock and mixer messages.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Alex Lee <alexlee188@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-11 18:05:38 +02:00
Daniel Mack d07140ba7f ALSA: usb-audio: add check for faulty clock in parse_audio_format_rates_v2()
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-11 18:05:05 +02:00
Daniel Mack 09414207d4 ALSA: usb-audio: export UAC2 clock selectors as mixer controls
The UAC2 clock selectors are fortunately compatible with UAC1 audio
selector units, so we can simply reuse the same approach to get all the
linked units.

Requests to this control need a different CS value though.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:18:04 +02:00
Daniel Mack 67e1daa0bb ALSA: usb-audio: clean up find_audio_control_unit()
Use a struct to parse the audio units, and return usable descriptors
for all types. There's no need to limit the result set, except for some
kind of sanity check.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:17:49 +02:00
Daniel Mack 2e0281d15c ALSA: usb-audio: add UAC2 sepecific Feature Unit controls
The bits to enable them are always 0 for UAC1 devices, so no additional
checks are required.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:17:38 +02:00
Daniel Mack 65f25da44b ALSA: usb-audio: unify constants from specification
Move more definitions from private enums to appropriate header files.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:17:22 +02:00
Daniel Mack 79f920fbff ALSA: usb-audio: parse clock topology of UAC2 devices
Audio devices which comply to the UAC2 standard can export complex clock
topologies in its descriptors and set up links between them.

The entities that are defined are

 - clock sources, which define the end-leafs.
 - clock selectors, which act as switch to select one out of many
   possible clocks sources.
 - clock multipliers, which have an input clock source, and act as clock
   source again. They can be used to derive one clock from another.

All sample rate changes, clock validity queries and the like must go to
clock source elements, while clock selectors and multipliers can be used
as terminal clock source.

The following patch adds a parser for these elements and functions to
iterate over the tree and find the leaf nodes (clock sources).

The samplerate set functions were moved to the new clock.c file.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:16:59 +02:00
Daniel Mack a6a3325913 ALSA: usb-audio: support partially write-protected UAC2 controls
So far, UAC2 controls are marked read-only if any of the channels are
marked read-only in the descriptors. Change this behaviour and

 - mark them writeable unless all channels are read-only
 - store the read-only mask in usb_mixer_elem_info and
 - check the mask again in set_cur_mix_value(), and bail out for
   write-protected channels.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:15:57 +02:00
Daniel Mack dcbe7bcfa3 ALSA: usb-audio: UAC2: clean up parsing of bmaControls
Introduce two new static inline functions for a more readable parsing
of UAC2 bmaControls.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31 18:15:45 +02:00