Commit Graph

197 Commits

Author SHA1 Message Date
Mark Brown 36ae1a96c4 ASoC: Dynamically allocate the rtd device for a non-empty release()
The device model needs a release() function so it can free devices when
they become dereferenced.  Do that for rtds.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-10 14:53:56 -08:00
Mark Brown 354a21423d ASoC: Declare soc_new_pcm() properly
Ensure that everything is seeing the same declaration by moving it to
a header file rather than putting the declaration in soc-core.c

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-12-22 17:34:25 +00:00
Stephen Warren 5a5049637c ASoC: Allow DAI links to be specified using device tree nodes
DAI link endpoints and platform (DMA) devices are currently specified
by name. When instantiating sound cards from device tree, it may be more
convenient to refer to these devices by phandle in the device tree, and
for code to describe DAI links using the "struct device_node *"
("of_node") those phandles map to.

This change adds new fields to snd_soc_dai_link which can "name" devices
using of_node, enhances soc_bind_dai_link() to allow binding based on
of_node, and enhances snd_soc_register_card() to ensure that illegal
combinations of name and of_node are not used.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22 11:00:21 +00:00
Stephen Warren a4a54dd5bb ASoC: Add utility to parse DAPM routes from device tree
Implement snd_soc_of_parse_audio_routing(), a utility function that can
parses a simple DAPM route table from device tree.The machine driver
specifies the DT property to use, since this is binding-specific.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 01:05:34 +00:00
Stephen Warren bec4fa05e2 ASoC: Add utility to set a card's name from device tree
Implement snd_soc_of_parse_card_name(), a utility function that sets a
card's name from device tree. The machine driver specifies the DT
property to use, since this is binding-specific.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 01:05:34 +00:00
Mark Brown 1dfb6efd87 ASoC: Remove rbtree register cache
All users now use regmap directly so delete the ASoC version of the code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13 00:20:28 +08:00
Lars-Peter Clausen 84b315ee89 ASoC: Drop unused state parameter from CODEC suspend callback
The existence of this parameter is purely historical. None of the CODEC drivers
uses it and we always pass in the same value anyway, so it should be safe to
remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02 10:32:03 +00:00
Stephen Warren 1633281b79 ASoC: Implement fully_routed card property
A card is fully routed if the DAPM route table describes all connections on
the board.

When a card is fully routed, some operations can be automated by the ASoC
core. The first, and currently only, such operation is described below, and
implemented by this patch.

Codecs often have a large number of external pins, and not all of these pins
will be connected on all board designs. Some machine drivers therefore call
snd_soc_dapm_nc_pin() for all the unused pins, in order to tell the ASoC core
never to activate them.

However, when a card is fully routed, the information needed to derive the
set of unused pins is present in card->dapm_routes. In this case, have
the ASoC core automatically call snd_soc_dapm_nc_pin() for each unused
codec pin.

This has been tested with soc/tegra/tegra_wm8903.c and soc/tegra/trimslice.c.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 21:34:54 +00:00
Mark Brown c9016a7937 ASoC: Remove LZO cache type
There are no current users and new drivers ought to be using the regmap
API and its cache implementation directly so just delete the ASoC copy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10 13:08:09 +00:00
Mark Brown d66a327dda ASoC: Remove extra space in runtime struct definition
My usual technique for finding definitions is to search for "name {"
which breaks with the extra space.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10 11:46:13 +00:00
ramesh.babu@linux.intel.com e50fad4f02 ASoC: Allow machines to ignore pmdown_time per-link
With this flag, each dai_link in machine driver can choose
to ignore pmdown_time during DAPM shut down sequence.

If the ignore_pmdown_time is set, the DAPM for corresponding DAI
will be executed immediately.

Signed-off-by: Ramesh Babu K V <ramesh.babu@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27 12:05:50 +02:00
Peter Ujfalusi 1d69c5c5de ASoC: core: Add flag to ignore pmdown_time at pcm_close
With this flag codec drivers can indicate that it is desired
to ignore the pmdown_time for DAPM shutdown sequence when
playback stream is stopped.
The DAPM sequence will be executed without delay in this case.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-14 20:42:21 +01:00
Peter Ujfalusi a92f1394a1 ASoC: fix codec breakage caused by the volsw/volsw_2r merger
By accident few places still uses the _2r calls from
the core.
This is a quick fix, the drivers using the old callbacks
going to be changed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-06 20:02:55 +01:00
Peter Ujfalusi 1576a5ff49 ASoC: core: Remove snd_soc_put_volsw_2r definition
We do not have users for snd_soc_put_volsw_2r anymore.
It can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:10 +01:00
Peter Ujfalusi 974815ba4f ASoC: core: Combine snd_soc_put_volsw/put_volsw_2r functions
Handle the put_volsw/put_volsw_2r in one function.

To avoid build breakage in twl6040 keep the
snd_soc_put_volsw_2r as define, and map it snd_soc_put_volsw.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:10 +01:00
Peter Ujfalusi f7915d9975 ASoC: core: Combine snd_soc_get_volsw/get_volsw_2r functions
Handle the get_volsw/get_volsw_2r in one function.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:09 +01:00
Peter Ujfalusi e8f5a10307 ASoC: core: Combine snd_soc_info_volsw/info_volsw_2r functions
Handle the info_volsw/info_volsw_2r in one function.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:09 +01:00
Peter Ujfalusi 30d86ba47f ASoC: core: Change SOC_SINGLE/DOUBLE_VALUE representation
SOC_SINGLE/DOUBLE_VALUE is used for mixer controls, where the
bits are within one register.

Assign .rreg to be the same as .reg for these types.

With this change we can tell if the mixer in question:
is mono:
mc->reg == mc->rreg && mc->shift == mc->rshift

is stereo, within single register:
mc->reg == mc->rreg && mc->shift != mc->rshift

is stereo, in two registers:
mc->reg != mc->rreg

The patch provide a small inline function to query, if the mixer
is stereo, or mono.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:09 +01:00
Mark Brown db432b414e ASoC: Do DAPM power checks only for widgets changed since last run
In order to reduce the number of DAPM power checks we run keep a list of
widgets which have been changed since the last DAPM run and iterate over
that rather than the full widget list. Whenever we change the power state
for a widget we add all the source and sink widgets it has to the dirty
list, ensuring that all widgets in the path are checked.

This covers more widgets than we need to as some of the neighbour widgets
won't be connected but it's simpler as a first step. On one system I tried
this gave:

           Power    Path   Neighbour
Before:    207      1939   2461
After:     114      1066   1327

which seems useful.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04 16:50:20 +01:00
Peter Ujfalusi cdffa775e7 ASoC: core: Introduce SOC_DOUBLE_R_VALUE macro
With the new macro we can remove duplicated code
for the SOC_DOUBLE_R type of controls.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04 16:27:05 +01:00
Peter Ujfalusi 460acbec1e ASoC: core: Introduce SOC_DOUBLE_VALUE macro
With the new macro we can remove duplicated code
for the SOC_DOUBLE type of controls.
We can also remap the SOC_SINGLE_VALUE macro to
SOC_DOUBLE_VALUE

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04 16:27:05 +01:00
Mark Brown 75d9ac46b9 ASoC: Allow DAI formats to be specified in the dai_link
For almost all machines the DAI format is a constant, always set to the
same thing. This means that not only should we normally set it on init
rather than in hw_params() (where it has been for historical reasons) we
should also allow users to configure this by setting a variable in the
dai_link structure. The combination of these two will make many machine
drivers even more data driven.

Implement a new dai_fmt field in the dai_link doing just that. Since 0 is
a valid value for many format flags and we need to be able to tell if the
field is actually set also add one to all the values used to configure
formats.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28 13:22:28 +01:00
Dong Aisheng 17841020e9 ASoC: soc-core: symmetry checking for each DAIs separately
The orginal code does not cover the case that one DAI such as codec
may be shared between other two DAIs(CPU).
When do symmetry checking, altough the codec DAI requires symmetry,
the two CPU DAIs may still be configured to run on different rates.

We change to check each DAI's state separately instead of only checking
the dai link to prevent this issue.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-21 15:59:46 +01:00
Mark Brown de02d0786d ASoC: Trace and collect statistics for DAPM graph walking
One of the longest standing areas for improvement in ASoC has been the
DAPM algorithm - it repeats the same checks many times whenever it is run
and makes no effort to limit the areas of the graph it checks meaning we
do an awful lot of walks over the full graph. This has never mattered too
much as the size of the graph has generally been small in relation to the
size of the devices supported and the speed of CPUs but it is annoying.

In preparation for work on improving this insert a trace point after the
graph walk has been done. This gives us specific timing information for
the walk, and in order to give quantifiable (non-benchmark) numbers also
count every time we check a link or check the power for a widget and report
those numbers. Substantial changes in the algorithm may require tweaks to
the stats but they should be useful for simpler things.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-21 14:53:44 +01:00
Mark Brown da1c6ea6cf ASoC: Allow source specification for CODEC level sysclk
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock
sources. When the clock is the clock for a DAI we do not usually need to
identify which clock is being configured so can use clk_id for the source
clock but with CODEC wide system clocks we will need to specify both the
clock being configured and the source.

Add a source argument to the CODEC driver set_sysclk() operation to
reflect this. As this operation is not as widely used as the DAI
set_sysclk() operation the change is not very invasive. We probably
ought to go and make the same alternation for DAIs at some point.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31 09:57:35 +01:00
Mark Brown 4a8923ba99 ASoC: Allow register defaults to be larger than unsigned short
Devices that need this exist; obviously the newer regmap defaults
mechanism will deal with this more happily.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31 09:51:50 +01:00
Mark Brown 33c5f969b9 ASoC: Allow idle_bias_off to be specified in CODEC drivers
If devices can unconditionally support idle_bias_off let them flag it in
their driver structure.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22 23:23:29 +01:00
Mark Brown bb3784ae36 Merge branch 'regmap-asoc' into for-3.2 2011-08-08 15:00:13 +09:00
Mark Brown 0671da189c ASoC: Add regmap as a control type
Allow drivers to set up their own regmap API structures. This is mainly
useful with MFDs where the core driver will have set up regmap at the
minute, though it may make sense to push the existing regmap setup out
of the core into the drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08 14:59:55 +09:00
Mark Brown be3ea3b9e8 ASoC: Use new register map API for ASoC generic physical I/O
Remove all the ASoC specific physical I/O code and replace it with calls
into the regmap API. The bulk write code can only be used safely if all
regmap calls are locked with the CODEC lock, we need to add bulk support
to the regmap API or replace the code with an open coded loop (though
currently it has no users...).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08 14:59:44 +09:00
Liam Girdwood 64a648c220 ASoC: dapm - Add DAPM stream completion event.
In preparation for Dynamic PCM (AKA DSP) support.

This adds a callback function to be called at the completion of a DAPM stream
event.

This can be used by DSP components to perform calculations based on DAPM graphs
after completion of stream events.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-25 22:07:24 +01:00
Liam Girdwood cb2cf612fb ASoC: core - Add convenience register for platform kcontrol and DAPM
Allow platform probe to register platform kcontrols and DAPM just like
the CODEC probe().

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05 11:07:41 -07:00
Liam Girdwood b795064137 ASoC: core - Add platform widget IO
Allow platform driver widgets to perform any IO required for DAPM.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05 11:07:39 -07:00
Liam Girdwood a491a5c84f ASoC: core - Add API call to register platform kcontrols.
In preparation for Dynamic PCM (AKA DSP) support.

Allow platform drivers to register kcontrols.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05 11:07:34 -07:00
Liam Girdwood f1442bc1e9 ASoC: core - Add platform read and write.
In preparation for ASoC Dynamic PCM (AKA DSP) support.

Allow platform driver to perform IO. Intended for platform DAPM.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 12:41:07 -07:00
Mark Brown 65fdd5c05a Merge branch 'for-3.0' into for-3.1
Trival fixup for move of I/O code into separate file.

Conflicts:
	sound/soc/soc-cache.c
2011-06-13 19:21:09 +01:00
Mark Brown e9c039052b ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O bus
This will be removed in -next so let's drop it from mainline as soon as
we can in order to minimise surprises.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-13 19:17:55 +01:00
Liam Girdwood b8c0dab9bf ASoC: core - PCM mutex per rtd
In preparation for the new ASoC Dynamic PCM support (AKA DSP support).

The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed
at runtime between the PCM device end (or Frontend - FE) and the physical DAI
(Backend - BE) using regular kcontrols (just like a hardware CODEC routes
audio in the analog domain). The Dynamic PCM core therefore must be
able to call PCM operations for both the Frontend and Backend(s) DAIs at
the same time.

Currently we have a global pcm_mutex that is used to serialise
the ASoC PCM operations. This patch removes the global mutex
and adds a mutex per RTD allowing the PCM operations to be reentrant and
allow control of more than one DAI at at time. e.g. a frontend PCM hw_params()
could configure multiple backend DAI hw_params() with similar or different
hw parameters at the same time.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 19:29:29 +01:00
Liam Girdwood 0168bf0d13 ASoC: core - Allow components to probe/remove in sequence.
Some ASoC components depend on other ASoC components to provide clocks and
power resources in order to probe() and vice versa for remove().

Allow components to be ordered so that components can be probed() and removed()
in sequences that conform to their dependencies.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07 18:38:27 +01:00
Liam Girdwood 552d1ef6b5 ASoC: core - Optimise and refactor pcm_new() to pass only rtd
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI.

Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains
card, pcm and DAI along with other members too that are useful too.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07 18:38:27 +01:00
Mark Brown d4c6005f8e ASoC: Add context parameter to card DAPM callbacks
The card callback will get called for each DAPM context in the card so it
can be useful for it to know which device is currently undergoing a
transition.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06 21:46:45 +01:00
Mark Brown 56fba41f8f ASoC: Specify target bias state directly as a bias state
Rather than a simple flag to say if we want the DAPM context to be at full
power specify the target bias state. This should have no current effect
but is a bit more direct and so makes it easier to change our decisions
about the which bias state to go into in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06 21:45:44 +01:00
Liam Girdwood 22de71ba03 ASoC: core - allow ASoC more flexible machine name
Allow ASoC machine drivers to register a driver name
and a longname. This allows user space to determine
the flavour of machine driver.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-12 17:40:03 +02:00
Takashi Iwai 87023ff74b ASoC: Declare const properly for enum texts
The enum texts are supposed to be const char * const [].  Without the
second const, it gets compile warnings like
    sound/soc/codecs/max98095.c:607:2: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 12:51:59 +02:00
Mark Brown fb257897bf ASoC: Work around allmodconfig failure
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28 12:09:06 +01:00
Lars-Peter Clausen d06e48db16 ASoC: Make struct snd_soc_card's dapm_widgets and dapm_routes const
Those should not be modified (and are not) by the core code, so make them const.
This also makes them consistent with the same members of snd_soc_codec.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-13 10:34:26 -07:00
Mark Brown b7af1dafdf ASoC: Add data based control initialisation for CODECs and cards
Allow CODEC and card drivers to point to an array of controls from their
driver structure rather than explicitly calling snd_soc_add_controls().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-08 09:18:11 +09:00
Dimitris Papastamos 239c970626 ASoC: Add snd_soc_codec_{readable,writable}_register()
Provide the top level ASoC core functions for indicating whether
a given register is readable or writable.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26 17:45:27 +00:00
Dimitris Papastamos 8020454c9a ASoC: Add default snd_soc_default_writable_register() callback
By using struct snd_soc_reg_access for the read/write/vol attributes
of the registers, we provide callbacks that automatically determine whether
a given register is readable/writable or volatile.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26 17:45:16 +00:00
Dimitris Papastamos 67850a892b ASoC: Add control_type in snd_soc_codec
This is mainly used by the soc-cache code to easily determine the
currently used underlying serial bus.  Set SND_SOC_CUSTOM to 1 so we
can distinguish it if it is not initialized or set.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26 17:44:24 +00:00