Commit Graph

1607 Commits

Author SHA1 Message Date
sudip 4dd17c9c8a crypto: asymmetric_keys - remove always false comparison
hour, min and sec are unsigned int and they can never be less than zero.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21 22:00:40 +08:00
Horia Geant? f074f7b103 crypto: tcrypt - avoid mapping from module image addresses
The output buffer in test_ahash_speed will point to an address located
within the tcrypt module image.
This causes problems when trying to DMA map the buffer.
For e.g. on ARM-based LS1021A, a page fault occurs within the
DMA API when trying to access the struct page returned by
virt_to_page(output):

insmod tcrypt.ko mode=403

testing speed of async sha1 (sha1-caam)
test  0 (   16 byte blocks,   16 bytes per update,   1 updates):
Unable to handle kernel paging request at virtual address f07e9080
pgd = e58d0e00
[f07e9080] *pgd=80000080007003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in: tcrypt(+)
CPU: 1 PID: 1119 Comm: insmod Not tainted 4.2.0-rc1-256134-gbf433416e675 #1
Hardware name: Freescale LS1021A
task: ea063900 ti: e5a34000 task.ti: e5a34000
PC is at dma_cache_maint_page+0x38/0xd0
LR is at __dma_page_cpu_to_dev+0x15/0x64
pc : [<800155a0>]    lr : [<8001564d>]    psr: 000f0033
sp : e5a35ca0  ip : 8063df00  fp : f07e9080
r10: 00000cd0  r9 : 8063df00  r8 : 805a2f04
r7 : 0017f804  r6 : 00000002  r5 : ee7f9000  r4 : 00000014
r3 : 80612d40  r2 : 01ff0080  r1 : 00000380  r0 : ee7f9000
Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
Control: 70c5387d  Table: e58d0e00  DAC: 9b7ede70
Process insmod (pid: 1119, stack limit = 0xe5a34210)
Stack: (0xe5a35ca0 to 0xe5a36000)
[...]
[<800155a0>] (dma_cache_maint_page) from [<8001564d>] (__dma_page_cpu_to_dev+0x15/0x64)
[<8001564d>] (__dma_page_cpu_to_dev) from [<800156eb>] (arm_dma_map_page+0x1f/0x44)
[<800156eb>] (arm_dma_map_page) from [<802935e3>] (ahash_digest+0x35f/0x510)
[<802935e3>] (ahash_digest) from [<7f800d03>] (test_ahash_speed.constprop.6+0x24a/0x4e4 [tcrypt])
[<7f800d03>] (test_ahash_speed.constprop.6 [tcrypt]) from [<7f802fd5>] (do_test+0x1898/0x2058 [tcrypt])
[<7f802fd5>] (do_test [tcrypt]) from [<7f80802f>] (tcrypt_mod_init+0x2e/0x63 [tcrypt])
[<7f80802f>] (tcrypt_mod_init [tcrypt]) from [<80009517>] (do_one_initcall+0xb3/0x134)
[<80009517>] (do_one_initcall) from [<80351ec7>] (do_init_module+0x3b/0x13c)
[<80351ec7>] (do_init_module) from [<8005cc3f>] (load_module+0x97b/0x9dc)
[<8005cc3f>] (load_module) from [<8005cd8d>] (SyS_finit_module+0x35/0x3e)
[<8005cd8d>] (SyS_finit_module) from [<8000d101>] (ret_fast_syscall+0x1/0x4c)
Code: 1aba 0152 eb00 0b02 (5882) 0f92

addr2line -f -i -e vmlinux 800155a0
page_zonenum
include/linux/mm.h:728
page_zone
include/linux/mm.h:881
dma_cache_maint_page
arch/arm/mm/dma-mapping.c:822

Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21 22:00:36 +08:00
Linus Torvalds aa57e0b281 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - The selftest overreads the IV test vector.

  - Fix potential infinite loop in sunxi-ss driver.

   - Fix powerpc build failure when VMX is set without VSX"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: testmgr - don't copy from source IV too much
  crypto: sunxi-ss - Fix a possible driver hang with ciphers
  crypto: vmx - VMX crypto should depend on CONFIG_VSX
2015-09-16 07:53:33 -07:00
Andrey Ryabinin 84cba178a3 crypto: testmgr - don't copy from source IV too much
While the destination buffer 'iv' is MAX_IVLEN size,
the source 'template[i].iv' could be smaller, thus
memcpy may read read invalid memory.
Use crypto_skcipher_ivsize() to get real ivsize
and pass it to memcpy.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-11 22:09:43 +08:00
Linus Torvalds b793c005ce Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "Highlights:

   - PKCS#7 support added to support signed kexec, also utilized for
     module signing.  See comments in 3f1e1bea.

     ** NOTE: this requires linking against the OpenSSL library, which
        must be installed, e.g.  the openssl-devel on Fedora **

   - Smack
      - add IPv6 host labeling; ignore labels on kernel threads
      - support smack labeling mounts which use binary mount data

   - SELinux:
      - add ioctl whitelisting (see
        http://kernsec.org/files/lss2015/vanderstoep.pdf)
      - fix mprotect PROT_EXEC regression caused by mm change

   - Seccomp:
      - add ptrace options for suspend/resume"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
  PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
  Documentation/Changes: Now need OpenSSL devel packages for module signing
  scripts: add extract-cert and sign-file to .gitignore
  modsign: Handle signing key in source tree
  modsign: Use if_changed rule for extracting cert from module signing key
  Move certificate handling to its own directory
  sign-file: Fix warning about BIO_reset() return value
  PKCS#7: Add MODULE_LICENSE() to test module
  Smack - Fix build error with bringup unconfigured
  sign-file: Document dependency on OpenSSL devel libraries
  PKCS#7: Appropriately restrict authenticated attributes and content type
  KEYS: Add a name for PKEY_ID_PKCS7
  PKCS#7: Improve and export the X.509 ASN.1 time object decoder
  modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
  extract-cert: Cope with multiple X.509 certificates in a single file
  sign-file: Generate CMS message as signature instead of PKCS#7
  PKCS#7: Support CMS messages also [RFC5652]
  X.509: Change recorded SKID & AKID to not include Subject or Issuer
  PKCS#7: Check content type and versions
  MAINTAINERS: The keyrings mailing list has moved
  ...
2015-09-08 12:41:25 -07:00
Linus Torvalds d975f309a8 Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-block
Pull SG updates from Jens Axboe:
 "This contains a set of scatter-gather related changes/fixes for 4.3:

   - Add support for limited chaining of sg tables even for
     architectures that do not set ARCH_HAS_SG_CHAIN.  From Christoph.

   - Add sg chain support to target_rd.  From Christoph.

   - Fixup open coded sg->page_link in crypto/omap-sham.  From
     Christoph.

   - Fixup open coded crypto ->page_link manipulation.  From Dan.

   - Also from Dan, automated fixup of manual sg_unmark_end()
     manipulations.

   - Also from Dan, automated fixup of open coded sg_phys()
     implementations.

   - From Robert Jarzmik, addition of an sg table splitting helper that
     drivers can use"

* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
  lib: scatterlist: add sg splitting function
  scatterlist: use sg_phys()
  crypto/omap-sham: remove an open coded access to ->page_link
  scatterlist: remove open coded sg_unmark_end instances
  crypto: replace scatterwalk_sg_chain with sg_chain
  target/rd: always chain S/G list
  scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
2015-09-02 13:22:38 -07:00
David Howells 07f081fb50 PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Add OIDs for sha224, sha284 and sha512 hash algos and use them to select
the hashing algorithm.  Without this, something like the following error
might get written to dmesg:

[   31.829322] PKCS7: Unknown OID: [32] 2.16.840.1.101.3.4.2.3
[   31.829328] PKCS7: Unknown OID: [180] 2.16.840.1.101.3.4.2.3
[   31.829330] Unsupported digest algo: 55

Where the 55 on the third line is OID__NR indicating an unknown OID.

Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-09-01 09:59:20 +10:00
Lars Persson bf433416e6 crypto: algif_aead - fix for multiple operations on AF_ALG sockets
The tsgl scatterlist must be re-initialized after each
operation. Otherwise the sticky bits in the page_link will corrupt the
list with pre-mature termination or false chaining.

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-25 21:13:20 +08:00
Herbert Xu 12773d932f crypto: testmgr - Use new skcipher interface
This patch replaces uses of blkcipher and ablkcipher with the
new skcipher interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21 22:21:20 +08:00
Herbert Xu 7a7ffe65c8 crypto: skcipher - Add top-level skcipher interface
This patch introduces the crypto skcipher interface which aims
to replace both blkcipher and ablkcipher.

It's very similar to the existing ablkcipher interface.  The
main difference is the removal of the givcrypt interface.  In
order to make the transition easier for blkcipher users, there
is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place
a request on the stack for synchronous transforms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21 22:21:19 +08:00
Stephan Mueller 8f183751a8 crypto: cmac - allow usage in FIPS mode
CMAC is an approved cipher in FIPS 140-2. The patch allows the use
of CMAC with TDES and AES in FIPS mode.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-19 22:59:48 +08:00
Dan Williams c56f6d1270 crypto: replace scatterwalk_sg_chain with sg_chain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[hch: split from a larger patch by Dan]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 08:12:54 -06:00
Herbert Xu dd43c4e92f crypto: null - Add missing Kconfig tristate for NULL2
This patch adds a missing tristate statement to Kconfig for the
new CRYPTO_NULL2 option.

Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 21:02:39 +08:00
Herbert Xu a26bcb0486 crypto: null - Use NULL2 in Makefile
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now
depends indirectly on NULL2.  However, the Makefile was not updated
to use the new option, resulting in potential build failures when
only NULL2 is enabled.

Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 19:49:13 +08:00
Herbert Xu 5e4b8c1fcc crypto: aead - Remove CRYPTO_ALG_AEAD_NEW flag
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone
has been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:53 +08:00
Herbert Xu b0d955ba46 crypto: aead - Remove old AEAD interfaces
Now that the AEAD conversion is complete we can rip out the old
AEAD interafce and associated code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:50 +08:00
Herbert Xu ba3749a719 crypto: cryptd - Remove reference to crypto_aead_crt
Pretty soon the crypto_aead encrypt/decrypt hooks will disappear
as they are now always identical to those in struct aead_alg.

This patch replaces the references to these hooks with the ones
from aead_alg instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:46 +08:00
Herbert Xu 376e0d697a crypto: echainiv - Use generic geniv init/exit helpers
This patch replaces the echainiv init/exit handlers with the generic
geniv helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:46 +08:00
Herbert Xu 659e7f5283 crypto: seqiv - Use generic geniv init/exit helpers
This patch replaces the seqiv init/exit handlers with the generic
geniv helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:46 +08:00
Herbert Xu 149a39717d crypto: aead - Add type-safe geniv init/exit helpers
This patch adds the helpers aead_init_geniv and aead_exit_geniv
which are type-safe and intended the replace the existing geniv
init/exit helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:44 +08:00
Herbert Xu 66008d4230 crypto: echainiv - Remove AEAD compatibility code
Now that we no longer have any legacy AEAD implementations the
compatibility code path can no longer be triggered.  This patch
removes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:43 +08:00
Herbert Xu 92932d03c2 crypto: seqiv - Remove AEAD compatibility code
Now that we no longer have any legacy AEAD implementations the
compatibility code path can no longer be triggered.  This patch
removes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:43 +08:00
Herbert Xu 8a2cd1c4a7 crypto: seqiv - Remove seqniv
Now that IPsec no longer uses seqniv we can remove it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:42 +08:00
Herbert Xu 60333f7b5d crypto: user - Remove crypto_lookup_aead call
As IV generators are now standalone AEAD transforms, we no longer
need to use the crypto_lookup_aead call.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:41 +08:00
Herbert Xu aa1b6bb7d7 crypto: algboss - Remove reference to nivaead
This patch removes a legacy reference to nivaead which is no longer
used.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:41 +08:00
David Howells cfc411e7ff Move certificate handling to its own directory
Move certificate handling out of the kernel/ directory and into a certs/
directory to get all the weird stuff in one place and move the generated
signing keys into this directory.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-14 16:06:13 +01:00
David Howells 772111ab01 PKCS#7: Add MODULE_LICENSE() to test module
Add a MODULE_LICENSE() line to the PKCS#7 test key module to fix this
warning:

	WARNING: modpost: missing MODULE_LICENSE() in
	crypto/asymmetric_keys/pkcs7_test_key.o

Whilst we're at it, also add a module description.

Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-13 02:51:33 +01:00
David Howells 99db443506 PKCS#7: Appropriately restrict authenticated attributes and content type
A PKCS#7 or CMS message can have per-signature authenticated attributes
that are digested as a lump and signed by the authorising key for that
signature.  If such attributes exist, the content digest isn't itself
signed, but rather it is included in a special authattr which then
contributes to the signature.

Further, we already require the master message content type to be
pkcs7_signedData - but there's also a separate content type for the data
itself within the SignedData object and this must be repeated inside the
authattrs for each signer [RFC2315 9.2, RFC5652 11.1].

We should really validate the authattrs if they exist or forbid them
entirely as appropriate.  To this end:

 (1) Alter the PKCS#7 parser to reject any message that has more than one
     signature where at least one signature has authattrs and at least one
     that does not.

 (2) Validate authattrs if they are present and strongly restrict them.
     Only the following authattrs are permitted and all others are
     rejected:

     (a) contentType.  This is checked to be an OID that matches the
     	 content type in the SignedData object.

     (b) messageDigest.  This must match the crypto digest of the data.

     (c) signingTime.  If present, we check that this is a valid, parseable
     	 UTCTime or GeneralTime and that the date it encodes fits within
     	 the validity window of the matching X.509 cert.

     (d) S/MIME capabilities.  We don't check the contents.

     (e) Authenticode SP Opus Info.  We don't check the contents.

     (f) Authenticode Statement Type.  We don't check the contents.

     The message is rejected if (a) or (b) are missing.  If the message is
     an Authenticode type, the message is rejected if (e) is missing; if
     not Authenticode, the message is rejected if (d) - (f) are present.

     The S/MIME capabilities authattr (d) unfortunately has to be allowed
     to support kernels already signed by the pesign program.  This only
     affects kexec.  sign-file suppresses them (CMS_NOSMIMECAP).

     The message is also rejected if an authattr is given more than once or
     if it contains more than one element in its set of values.

 (3) Add a parameter to pkcs7_verify() to select one of the following
     restrictions and pass in the appropriate option from the callers:

     (*) VERIFYING_MODULE_SIGNATURE

	 This requires that the SignedData content type be pkcs7-data and
	 forbids authattrs.  sign-file sets CMS_NOATTR.  We could be more
	 flexible and permit authattrs optionally, but only permit minimal
	 content.

     (*) VERIFYING_FIRMWARE_SIGNATURE

	 This requires that the SignedData content type be pkcs7-data and
	 requires authattrs.  In future, this will require an attribute
	 holding the target firmware name in addition to the minimal set.

     (*) VERIFYING_UNSPECIFIED_SIGNATURE

	 This requires that the SignedData content type be pkcs7-data but
	 allows either no authattrs or only permits the minimal set.

     (*) VERIFYING_KEXEC_PE_SIGNATURE

	 This only supports the Authenticode SPC_INDIRECT_DATA content type
	 and requires at least an SpcSpOpusInfo authattr in addition to the
	 minimal set.  It also permits an SPC_STATEMENT_TYPE authattr (and
	 an S/MIME capabilities authattr because the pesign program doesn't
	 remove these).

     (*) VERIFYING_KEY_SIGNATURE
     (*) VERIFYING_KEY_SELF_SIGNATURE

	 These are invalid in this context but are included for later use
	 when limiting the use of X.509 certs.

 (4) The pkcs7_test key type is given a module parameter to select between
     the above options for testing purposes.  For example:

	echo 1 >/sys/module/pkcs7_test_key/parameters/usage
	keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7

     will attempt to check the signature on stuff.pkcs7 as if it contains a
     firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE).

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells f29299b480 KEYS: Add a name for PKEY_ID_PKCS7
Add a name for PKEY_ID_PKCS7 into the pkey_id_type_name array.

Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-12 17:01:01 +01:00
David Howells fd19a3d195 PKCS#7: Improve and export the X.509 ASN.1 time object decoder
Make the X.509 ASN.1 time object decoder fill in a time64_t rather than a
struct tm to make comparison easier (unfortunately, this makes readable
display less easy) and export it so that it can be used by the PKCS#7 code
too.

Further, tighten up its parsing to reject invalid dates (eg. weird
characters, non-existent hour numbers) and unsupported dates (eg. timezones
other than 'Z' or dates earlier than 1970).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells 60d65cacd7 PKCS#7: Support CMS messages also [RFC5652]
Since CMS is an evolution of PKCS#7, with much of the ASN.1 being
compatible, add support for CMS signed-data messages also [RFC5652 sec 5].

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells a4c6e57f4f X.509: Change recorded SKID & AKID to not include Subject or Issuer
The key identifiers fabricated from an X.509 certificate are currently:

 (A) Concatenation of serial number and issuer

 (B) Concatenation of subject and subjectKeyID (SKID)

When verifying one X.509 certificate with another, the AKID in the target
can be used to match the authoritative certificate.  The AKID can specify
the match in one or both of two ways:

 (1) Compare authorityCertSerialNumber and authorityCertIssuer from the AKID
     to identifier (A) above.

 (2) Compare keyIdentifier from the AKID plus the issuer from the target
     certificate to identifier (B) above.

When verifying a PKCS#7 message, the only available comparison is between
the IssuerAndSerialNumber field and identifier (A) above.

However, a subsequent patch adds CMS support.  Whilst CMS still supports a
match on IssuerAndSerialNumber as for PKCS#7, it also supports an
alternative - which is the SubjectKeyIdentifier field.  This is used to
match to an X.509 certificate on the SKID alone.  No subject information is
available to be used.

To this end change the fabrication of (B) above to be from the X.509 SKID
alone.  The AKID in keyIdentifier form then only matches on that and does
not include the issuer.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells 2c7fd3675e PKCS#7: Check content type and versions
We only support PKCS#7 signed-data [RFC2315 sec 9] content at the top level,
so reject anything else.  Further, check that the version numbers in
SignedData and SignerInfo are 1 in both cases.

Note that we don't restrict the inner content type.  In the PKCS#7 code we
don't parse the data attached there, but merely verify the signature over
it.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:00 +01:00
Herbert Xu 104880a6b4 crypto: authencesn - Convert to new AEAD interface
This patch converts authencesn to the new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10 23:20:13 +08:00
Herbert Xu bf20d77217 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Merge the crypto tree to pull in the authencesn fix.
2015-08-10 23:17:13 +08:00
Herbert Xu 443c0d7ed9 crypto: authencesn - Fix breakage with new ESP code
The ESP code has been updated to generate a completely linear
AD SG list.  This unfortunately broke authencesn which expects
the AD to be divided into at least three parts.

This patch fixes it to cope with the new format.  Later we will
fix it properly to accept arbitrary input and not rely on the
input being linear as part of the AEAD conversion.

Fixes: 7021b2e1cd ("esp4: Switch to new AEAD interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10 23:13:51 +08:00
David Howells 4ebdb76f7d PKCS#7: Allow detached data to be supplied for signature checking purposes
It is possible for a PKCS#7 message to have detached data.  However, to verify
the signatures on a PKCS#7 message, we have to be able to digest the data.
Provide a function to supply that data.  An error is given if the PKCS#7
message included embedded data.

This is used in a subsequent patch to supply the data to module signing where
the signature is in the form of a PKCS#7 message with detached data, whereby
the detached data is the module content that is signed.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
David Howells 4573b64a31 X.509: Support X.509 lookup by Issuer+Serial form AuthorityKeyIdentifier
If an X.509 certificate has an AuthorityKeyIdentifier extension that provides
an issuer and serialNumber, then make it so that these are used in preference
to the keyIdentifier field also held therein for searching for the signing
certificate.

If both the issuer+serialNumber and the keyIdentifier are supplied, then the
certificate is looked up by the former but the latter is checked as well.  If
the latter doesn't match the subjectKeyIdentifier of the parent certificate,
EKEYREJECTED is returned.

This makes it possible to chain X.509 certificates based on the issuer and
serialNumber fields rather than on subjectKeyIdentifier.  This is necessary as
we are having to deal with keys that are represented by X.509 certificates
that lack a subjectKeyIdentifier.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
David Howells b92e6570a9 X.509: Extract both parts of the AuthorityKeyIdentifier
Extract both parts of the AuthorityKeyIdentifier, not just the keyIdentifier,
as the second part can be used to match X.509 certificates by issuer and
serialNumber.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
Herbert Xu e94c6a7a6d crypto: authenc - Add Kconfig dependency on CRYPTO_NULL
CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses
null for copying.

Reported-by: Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-05 15:30:31 +08:00
Herbert Xu a4198fd4b4 crypto: testmgr - Reenable authenc tests
Now that all implementations of authenc have been converted we can
reenable the tests.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:34 +08:00
Herbert Xu 92d95ba917 crypto: authenc - Convert to new AEAD interface
This patch converts authenc to the new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:31 +08:00
Herbert Xu 7079ce62c0 crypto: testmgr - Disable authenc test and convert test vectors
This patch disables the authenc tests while the conversion to the
new IV calling convention takes place.  It also replaces the authenc
test vectors with ones that will work with the new IV convention.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:30 +08:00
Kees Cook 0c5f0aa5dd crypto: jitterentropy - use safe format string parameters
Since the API for jent_panic() does not include format string parameters,
adjust the call to panic() to use a literal string to avoid any future
callers from leaking format strings into the panic message.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28 15:03:34 +08:00
Tadeusz Struk a9d4f82ff9 crypto: rsa - fix invalid check for keylen in fips mode
The condition checking allowed key length was invalid.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-21 20:19:36 +08:00
Martin Willi b1ccc8f4b6 crypto: poly1305 - Add a four block AVX2 variant for x86_64
Extends the x86_64 Poly1305 authenticator by a function processing four
consecutive Poly1305 blocks in parallel using AVX2 instructions.

For large messages, throughput increases by ~15-45% compared to two
block SSE2:

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3809514 opers/sec,  365713411 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5973423 opers/sec,  573448627 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9446779 opers/sec,  906890803 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1364814 opers/sec,  393066691 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2045780 opers/sec,  589184697 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3711946 opers/sec, 1069040592 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  573686 opers/sec,  605812732 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1647802 opers/sec, 1740079440 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  292970 opers/sec,  609378224 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  943229 opers/sec, 1961916528 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  494623 opers/sec, 2041804569 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  254045 opers/sec, 2089271014 bytes/sec

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3826224 opers/sec,  367317552 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5948638 opers/sec,  571069267 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9439110 opers/sec,  906154627 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1367756 opers/sec,  393913872 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2056881 opers/sec,  592381958 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3711153 opers/sec, 1068812179 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  574940 opers/sec,  607136745 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1948830 opers/sec, 2057964585 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  293308 opers/sec,  610082096 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates): 1235224 opers/sec, 2569267792 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  684405 opers/sec, 2825226316 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  367101 opers/sec, 3019039446 bytes/sec

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:29 +08:00
Martin Willi c70f4abef0 crypto: poly1305 - Add a SSE2 SIMD variant for x86_64
Implements an x86_64 assembler driver for the Poly1305 authenticator. This
single block variant holds the 130-bit integer in 5 32-bit words, but uses
SSE to do two multiplications/additions in parallel.

When calling updates with small blocks, the overhead for kernel_fpu_begin/
kernel_fpu_end() negates the perfmance gain. We therefore use the
poly1305-generic fallback for small updates.

For large messages, throughput increases by ~5-10% compared to
poly1305-generic:

testing speed of poly1305 (poly1305-generic)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 4080026 opers/sec,  391682496 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 6221094 opers/sec,  597225024 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9609750 opers/sec,  922536057 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1459379 opers/sec,  420301267 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2115179 opers/sec,  609171609 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3729874 opers/sec, 1074203856 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  593000 opers/sec,  626208000 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1081536 opers/sec, 1142102332 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  302077 opers/sec,  628320576 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  554384 opers/sec, 1153120176 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  278715 opers/sec, 1150536345 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  140202 opers/sec, 1153022070 bytes/sec

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3790063 opers/sec,  363846076 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5913378 opers/sec,  567684355 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9352574 opers/sec,  897847104 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1362145 opers/sec,  392297990 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2007075 opers/sec,  578037628 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  566272 opers/sec,  597984182 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  288857 opers/sec,  600823808 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  153075 opers/sec, 1258896201 bytes/sec

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:27 +08:00
Martin Willi 2546f811ef crypto: poly1305 - Export common Poly1305 helpers
As architecture specific drivers need a software fallback, export Poly1305
init/update/final functions together with some helpers in a header file.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:26 +08:00
Martin Willi 6692cbc28e crypto: testmgr - Add a longer ChaCha20 test vector
The AVX2 variant of ChaCha20 is used only for messages with >= 512 bytes
length. With the existing test vectors, the implementation could not be
tested. Due that lack of such a long official test vector, this one is
self-generated using chacha20-generic.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:26 +08:00
Martin Willi 3d1e93cdf1 crypto: chacha20 - Add an eight block AVX2 variant for x86_64
Extends the x86_64 ChaCha20 implementation by a function processing eight
ChaCha20 blocks in parallel using AVX2.

For large messages, throughput increases by ~55-70% compared to four block
SSSE3:

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 42249230 operations in 10 seconds (675987680 bytes)
test 1 (256 bit key, 64 byte blocks): 46441641 operations in 10 seconds (2972265024 bytes)
test 2 (256 bit key, 256 byte blocks): 33028112 operations in 10 seconds (8455196672 bytes)
test 3 (256 bit key, 1024 byte blocks): 11568759 operations in 10 seconds (11846409216 bytes)
test 4 (256 bit key, 8192 byte blocks): 1448761 operations in 10 seconds (11868250112 bytes)

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 41999675 operations in 10 seconds (671994800 bytes)
test 1 (256 bit key, 64 byte blocks): 45805908 operations in 10 seconds (2931578112 bytes)
test 2 (256 bit key, 256 byte blocks): 32814947 operations in 10 seconds (8400626432 bytes)
test 3 (256 bit key, 1024 byte blocks): 19777167 operations in 10 seconds (20251819008 bytes)
test 4 (256 bit key, 8192 byte blocks): 2279321 operations in 10 seconds (18672197632 bytes)

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:25 +08:00