Commit Graph

4380 Commits

Author SHA1 Message Date
Linus Torvalds e531cdf50a MMC core:
- Fix ABI regression of MMC BLK ioctl
  - Remove the unused MMC_DATA_STREAM flag
  - Enable asynchronous system PM for the host device
  - Minor fixes and clean-ups
 
 SDHCI host:
 Throughout the years, the numbers of SDHCI variants have increased and so
 has also the numbers of SDHCI callbacks/quirks. The purpose of these
 callbacks/quirks were to enable SDHCI to deal with variant specific
 requirements, but unfortunate this method didn't scale. Instead we have
 ended up with a mess. Not only did the code become suboptimal but also
 highly fragile.
 
 Lately many discussions of how to move forward with SDHCI has taken place
 at the MMC mailing list. Step by step, we aim to turn SDHCI's common code
 into a set of library functions. This will enable for optimizations and
 allow some of the existing callbacks/quirks to be removed, which also
 should help to make the code less fragile.
 
 Therefore I am also really pleased to announce that Adrian Hunter (Intel)
 has volunteered to step in as the maintainer for SDHCI.
 
 Future wise, I hope the community around SDHCI will continue to grow and
 that this release cycle can be the starting point of moving SDHCI into a
 better shape. As a matter of fact, already in this cycle the re-factoring
 has begun, but of course there are also fixes and new features included.
 Some highlights:
 
  - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP
  - sdhci-acpi: Add support for QCOM controllers
  - sdhci-pic32: Add new SDHCI variant for PIC32MZDA
 
 Other hosts:
  - atmel-mci: Fix a NULL pointer dereference
  - mediatek: Add SD write-protect support
  - mmc_spi: Fix card detect in GPIO case
  - tmio/sdhi: Add r8a7795 support
  - tmio/sdhi: Some fixes and clean-ups
  - dw_mmc: Add HW reset support
  - dw_mmc: Some fixes and clean-ups
  - sunxi: Add support for MMC DDR52 mode
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW7+1kAAoJEP4mhCVzWIwpFREP+wcm8CLPoIz0VamZ8wocU5/S
 NK+EINCrVF4AbvcTj78A/FE099P5e3kXW84cZP5fCGSk7MvTizlIP0kDT73XkYbf
 FV1xQYAq5E9PtWfswyLqEiYcHVFzwhxwHRy8pXnJ7bummM8OvZYSnao4kdxzW3Mr
 j2lELoUVYma5hnoXBMrq04kjwPukdrFXYMz4BulE0aoCrfp2+CoKcDbykh97zWbu
 B7ta2NG5EuszXepgsAPSGbFDuFXJ4EeDtZNzowom6ifkKusNa+42lOyBA+WiHBZ6
 kfSOyRHJ/URuGifir7hCXLvr2GVpFF3d399olDawCXEVCIhkrZ4SKJ25kLdABz9E
 IrikhpBlRIhquAW4clNnPNYWqGTsOT1Coj+6E/9XUHa8C8gGEV7W3j8nNzMCT2O4
 GMynfyXKIJ6JnuM03qqv3kmATmbRI3fulR6OTNObgAWSGeZLuxa1bIYDVXhtr2nQ
 Spl4nViOnZdfdNz4LkqS6vuGKscKViWFtt/wLi+gnKtbGfffb8CGrucd13vQ7fiK
 OP9WZoWLQ+YlItXDee02vn4ccH463KjIIKJdLsvmSHz+lfPnXRI2KR37+j7sczvo
 V3msYYkbjB1hghAunR94Zc3RXwV28R1/mqcOGzXv2A+Q1J4g//Q+gS8DGzXzlaRV
 58OJRqiyTWMktZ0TZM0V
 =MFMb
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
      - Fix ABI regression of MMC BLK ioctl
      - Remove the unused MMC_DATA_STREAM flag
      - Enable asynchronous system PM for the host device
      - Minor fixes and clean-ups

  SDHCI host:
     Throughout the years, the numbers of SDHCI variants have increased
     and so has also the numbers of SDHCI callbacks/quirks.  The purpose
     of these callbacks/quirks were to enable SDHCI to deal with variant
     specific requirements, but unfortunate this method didn't scale.
     Instead we have ended up with a mess.  Not only did the code become
     suboptimal but also highly fragile.

     Lately many discussions of how to move forward with SDHCI has taken
     place at the MMC mailing list.  Step by step, we aim to turn
     SDHCI's common code into a set of library functions.  This will
     enable for optimizations and allow some of the existing callbacks
     and quirks to be removed, which also should help to make the code
     less fragile.

     Therefore I am also really pleased to announce that Adrian Hunter
     (Intel) has volunteered to step in as the maintainer for SDHCI.

     Future wise, I hope the community around SDHCI will continue to
     grow and that this release cycle can be the starting point of
     moving SDHCI into a better shape.  As a matter of fact, already in
     this cycle the re-factoring has begun, but of course there are also
     fixes and new features included.  Some highlights:

      - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP
      - sdhci-acpi: Add support for QCOM controllers
      - sdhci-pic32: Add new SDHCI variant for PIC32MZDA

  Other hosts:
      - atmel-mci: Fix a NULL pointer dereference
      - mediatek: Add SD write-protect support
      - mmc_spi: Fix card detect in GPIO case
      - tmio/sdhi: Add r8a7795 support
      - tmio/sdhi: Some fixes and clean-ups
      - dw_mmc: Add HW reset support
      - dw_mmc: Some fixes and clean-ups
      - sunxi: Add support for MMC DDR52 mode"

* tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc: (123 commits)
  mmc: sdhci-of-at91: fix wake-up issue when using runtime pm
  mmc: sdhci-pci: Do not set DMA mask in enable_dma()
  mmc: sdhci-acpi: Remove enable_dma() hook
  mmc: sdhci: Set DMA mask when adding host
  mmc: block: fix ABI regression of mmc_blk_ioctl
  mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config
  mmc: core: remove redundant memset of sdio_read_cccr
  mmc: core: remove redundant memset of mmc_decode_cid
  mmc: of_mmc_spi: fix unused warning
  mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
  mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling
  mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume
  Documentation: bindings: add description of phy for sdhci-of-arasan
  mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
  mmc: mmci: Remove unnecessary header file
  mmc: sdhci-acpi: add QCOM controllers
  mmc: tegra: implement memcomp pad calibration
  mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch
  mmc: mediatek: Change signal voltage error to dev_dbg()
  mmc: sh_mmcif, tmio: Use ARCH_RENESAS
  ...
2016-03-21 14:35:52 -07:00
ludovic.desroches@atmel.com 64e5cd7231 mmc: sdhci-of-at91: fix wake-up issue when using runtime pm
It is impossible to wake-up on card detect event because when sdhci
controller is runtime suspended, it is assumed that all clocks are
disabled so we can't get irqs.
If the device is removable and there is no gpio to manage the card
detection then polling is used. It doesn't mean card detection is broken.
It is curently we only way to wake-up on card event if using runtime pm.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-18 09:12:32 +01:00
Alexandre Courbot bd9ff18bff mmc: sdhci-pci: Do not set DMA mask in enable_dma()
DMA mask will already be set by sdhci_set_dma_mask(), which
is equivalent to the removed code since pci_set_dma_mask()
expands to its DMA-API counterpart.

There should also be no reason to set the DMA mask after probe.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-18 09:12:25 +01:00
Alexandre Courbot 741b48f4f3 mmc: sdhci-acpi: Remove enable_dma() hook
This hook was solely used to set the DMA mask, which is now done
by the newly-added sdhci_set_dma_mask() function.

The use of a flag to ensure the mask is only set once is a strong hint
that it should not have been done there anyway.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-18 09:12:19 +01:00
Alexandre Courbot 7b91369b46 mmc: sdhci: Set DMA mask when adding host
Set the DMA mask in sdhci_add_host() after we determined the
capabilities of the device. 64-bit devices in particular are given the
proper mask that ensures bounce buffers are not used.

Also disable DMA if no proper DMA mask can be set, as the DMA-API
documentation specifies.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-18 09:11:11 +01:00
Linus Torvalds 96b9b1c956 TTY/Serial patches for 4.6-rc1
Here's the big tty/serial driver pull request for 4.6-rc1.
 
 Lots of changes in here, Peter has been on a tear again, with lots of
 refactoring and bugs fixes, many thanks to the great work he has been
 doing.  Lots of driver updates and fixes as well, full details in the
 shortlog.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlbp8z8ACgkQMUfUDdst+ym1vwCgnOOCORaZyeQ4QrcxPAK5pHFn
 VrMAoNHvDgNYtG+Hmzv25Lgp3HnysPin
 =MLRG
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver pull request for 4.6-rc1.

  Lots of changes in here, Peter has been on a tear again, with lots of
  refactoring and bugs fixes, many thanks to the great work he has been
  doing.  Lots of driver updates and fixes as well, full details in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits)
  serial: 8250: describe CONFIG_SERIAL_8250_RSA
  serial: samsung: optimize UART rx fifo access routine
  serial: pl011: add mark/space parity support
  serial: sa1100: make sa1100_register_uart_fns a function
  tty: serial: 8250: add MOXA Smartio MUE boards support
  serial: 8250: convert drivers to use up_to_u8250p()
  serial: 8250/mediatek: fix building with SERIAL_8250=m
  serial: 8250/ingenic: fix building with SERIAL_8250=m
  serial: 8250/uniphier: fix modular build
  Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
  Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
  serial: mvebu-uart: initial support for Armada-3700 serial port
  serial: mctrl_gpio: Add missing module license
  serial: ifx6x60: avoid uninitialized variable use
  tty/serial: at91: fix bad offset for UART timeout register
  tty/serial: at91: restore dynamic driver binding
  serial: 8250: Add hardware dependency to RT288X option
  TTY, devpts: document pty count limiting
  tty: goldfish: support platform_device with id -1
  drivers: tty: goldfish: Add device tree bindings
  ...
2016-03-17 13:53:25 -07:00
Shawn Lin 83c742c344 mmc: block: fix ABI regression of mmc_blk_ioctl
If mmc_blk_ioctl returns -EINVAL, blkdev_ioctl continues to
work without returning err to user-space. But now we check
CAP_SYS_RAWIO firstly, so we return -EPERM to blkdev_ioctl,
which make blkdev_ioctl return -EPERM to user-space directly.
So this will break all the ioctl with BLKROSET. Now we find
Android-adb suffer it for the following log:

remount of /system failed;
couldn't make block device writable: Operation not permitted
openat(AT_FDCWD, "/dev/block/platform/ff420000.dwmmc/by-name/system", O_RDONLY) = 3
ioctl(3, BLKROSET, 0)  = -1 EPERM (Operation not permitted)

Fixes: a5f5774c55 ("mmc: block: Add new ioctl to send multi commands")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:42 +01:00
Brent Taylor 93c77d2999 mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config
Using an at91sam9g20ek development board with DTS configuration may trigger
a kernel panic because of a NULL pointer dereference exception, while
configuring DMA. Let's fix this by adding a check for pdata before
dereferencing it.

Signed-off-by: Brent Taylor <motobud@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:41 +01:00
Shawn Lin a0747eb81c mmc: core: remove redundant memset of sdio_read_cccr
When initializing sdio card, we get struct mmc_card
from mmc_alloc_card which allocates it by kzalloc. So we
don't need another memset while reading cccr.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:41 +01:00
Shawn Lin 0076c71e37 mmc: core: remove redundant memset of mmc_decode_cid
When initializing sd or sdio card, we get struct mmc_card
from mmc_alloc_card which allocates it by kzalloc. So we don't
need another memset while decoding cid.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:41 +01:00
Brian Norris 96466fcb6c mmc: of_mmc_spi: fix unused warning
drivers/mmc/host/of_mmc_spi.c: In function 'mmc_spi_get_pdata':
drivers/mmc/host/of_mmc_spi.c:77:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret = -EINVAL;
      ^

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:40 +01:00
Shawn Lin 91aa366109 mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
This patch adds Generic PHY access for sdhci-of-arasan. Driver
can get PHY handler from dt-binding, and power-on/init the PHY.
Currently, it's just mandatory for arasan,sdhci-5.1.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:40 +01:00
Shawn Lin 278d09624e mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling
Currently, some err handling of sdhci_arasan_probe return directly
without calling sdhci_pltfm_free. This patch fixes them.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:39 +01:00
Shawn Lin 842750488d mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume
We don't really need disable clk_ahb when failing to resume. Otherwise
we may take risk of bus error for accessing register without clk_ahb.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:39 +01:00
Adrian Hunter 9951362479 mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
Normally the timeout clock frequency is read from the capabilities
register.  It is also possible to set the value prior to calling
sdhci_add_host() in which case that value will override the
capabilities register value.  However that was being done after
calculating max_busy_timeout so that max_busy_timeout was being
calculated using the wrong value of timeout_clk.

Fix that by moving the override before max_busy_timeout is
calculated.

The result is that the max_busy_timeout and max_discard
increase for BSW devices so that, for example, the time for
mkfs.ext4 on a 64GB eMMC drops from about 1 minute 40 seconds
to about 20 seconds.

Note, in the future, the capabilities setting will be tidied up
and this override won't be used anymore.  However this fix is
needed for stable.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:38 +01:00
Wang Hongcheng 0743bbf0bc mmc: mmci: Remove unnecessary header file
The header file asm/sizes.h is unnecessary, let's remove it.
This also allows to compile under X86 arch.

Signed-off-by: Wang Hongcheng <annie.wang@amd.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:37 +01:00
Philip Elcan 70cce2af73 mmc: sdhci-acpi: add QCOM controllers
This adds the HIDs for Qualcomm Technologies Inc SDHC
controllers:
QCOM8051: non-removable device that does not support 1.8v
QCOM8052: non-removable device that does support 1.8v

Signed-off-by: Philip Elcan <pelcan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:37 +01:00
Lucas Stach e5c63d91cd mmc: tegra: implement memcomp pad calibration
The Tegra30+ SDMMC module has memcomp pads that are used to
automatically find and set the correct drive strength settings to
the sdmmc pads. The calibration needs to be manually kicked off
when the card signal voltage is changed, after the card clock is
supplied again.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
[Ulf: Rebased to fix a trivial compile error]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:36 +01:00
Nicolas Boichat fac49ce575 mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch
We've introduced a new helper in the MMC core:
mmc_regulator_set_vqmmc().  Let's use this in mtk-sd.  Using this new
helper has some advantages:

    1. We get the mmc_regulator_set_vqmmc() behavior of trying to match
       VQMMC and VMMC when the signal voltage is 3.3V.  This ensures max
       compatibility.

    2. We get rid of a few more warnings when probing unsupported
       voltages.

    3. We get rid of some non-mediatek specific code in mtk-sd.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:36 +01:00
Nicolas Boichat f9bab9d2b1 mmc: mediatek: Change signal voltage error to dev_dbg()
In commit ceae98f20e ("mmc: core: Try other signal levels
during power up") we can see that there are times when it's
valid to try several signal voltages.  Don't print an ugly
error in the logs when that happens.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:35 +01:00
Simon Horman 49312c1f32 mmc: sh_mmcif, tmio: Use ARCH_RENESAS
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:35 +01:00
Lucas Stach 3491b69045 mmc: tegra: properly disable card clock
The new code to do the clock rate setting externally to the SDMMC
module has a shortcut to not propagate changes with a 0 rate to
the CAR by simply bailing out. This breaks proper cutting of the
card clock. Fix it by directly calling the correct sdhci function.

Fixes: a8e326a911 "mmc: tegra: implement module external clock change"
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17 14:54:10 +01:00
Magnus Damm bcdc9f260b mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case
This patch fixes the MMC SPI driver from doing polling card detect when a
CD GPIO that supports interrupts is specified using the gpios DT property.

Without this patch the DT node below results in the following output:

 spi_gpio: spi-gpio { /* SD2 @ CN12 */
         compatible = "spi-gpio";
         #address-cells = <1>;
         #size-cells = <0>;
         gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>;
         gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>;
         gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>;
         num-chipselects = <1>;
         cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
         status = "okay";

         spi@0 {
                 compatible = "mmc-spi-slot";
                 reg = <0>;
                 voltage-ranges = <3200 3400>;
                 spi-max-frequency = <25000000>;
                 gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;   /* CD */
         };
 };

 # dmesg | grep mmc
 mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new SDHC card on SPI
 mmcblk0: mmc0:0000 SU04G 3.69 GiB
 mmcblk0: p1

With this patch applied the "cd polling" portion above disappears.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-16 12:36:09 +01:00
Jon Hunter 7bf037d6ac mmc: tegra: Disable UHS-I modes for tegra114
SD card support for Tegra114 started failing after commit a8e326a911
("mmc: tegra: implement module external clock change") was merged. This
commit was part of a series to enable UHS-I modes for Tegra. To
workaround this problem for now, disable UHS-I modes for Tegra114 by
separating the soc data structures for Tegra114 and Tegra124 so that
UHS-I is still enabled for Tegra124 but not Tegra114.

Fixes: a8e326a911 ("mmc: tegra: implement module external clock change")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-16 12:35:37 +01:00
Jisheng Zhang 887171c730 mmc: sdhci-pltfm: remove priv variable from sdhci_pltfm_host
Now all clients migration to use sdhci_pltfm_init for private
allocation is done and there's no users of the priv variable, so we can
remove it from the sdhci_pltfm_host structure.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:30 +01:00
Jisheng Zhang dc99471418 mmc: sdhci-pxav2: remove unnecessary assignment of pltfm_host->priv
The sdhci_pltfm_init() function has initialized the priv member as
NULL, so there's no need to do it again.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:30 +01:00
Jisheng Zhang 0734e79c05 mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates sdhci-tegra
to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:29 +01:00
Jisheng Zhang 1531675269 mmc: sdhci-st: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates sdhci-st
to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:29 +01:00
Jisheng Zhang f599da406b mmc: sdhci-pxav3: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates sdhci-pxav3
to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:28 +01:00
Jisheng Zhang 8605e7aeab mmc: sdhci-of-esdhc: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates the
sdhci-of-esdhc driver to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:28 +01:00
Jisheng Zhang 10f1c1352c mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates the
sdhci-of-at91 driver to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:27 +01:00
Jisheng Zhang 89211418cb mmc: sdhci-of-arasan: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates the
sdhci-of-arasan driver to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:27 +01:00
Jisheng Zhang 0c7fe32e84 mmc: sdhci-of-arasan: fix clk issue in sdhci_arasan_remove()
sdhci_pltfm_unregister() could operate host's registers, it will cause
problems if the clk is already disabled and unprepared. Fix this issue
by moving the clk_disable_unprepare() call to the end of remove
function.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:27 +01:00
Jisheng Zhang 6f699531b6 mmc: sdhci-msm: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates sdhci-msm
to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:26 +01:00
Jisheng Zhang a50396a40f mmc: sdhci-msm: factorise sdhci_msm_pdata outisde of sdhci_msm_host
There's no need to allocate one sdhci_msm_pdata for each sdhci_msm_host.
This patch removes the sdhci_msm_pdata member from sdhci_msm_host and
uses one static global sdhci_msm_pdata for all sdhci msm hosts. It also
marks sdhci_msm_ops as const.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:26 +01:00
Jisheng Zhang 070e6d3ff5 mmc: sdhci-esdhc-imx: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates the sdhci
esdhc-imx driver to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:25 +01:00
Jisheng Zhang 13db83e2b6 mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation
Commit 0e74823429 ("mmc: sdhci: Add size for caller in init+register")
allows users of sdhci_pltfm to allocate private space in calls to
sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates sdhci-bcm2835
to this allocation.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:25 +01:00
Chaotian Jing 8d53e41238 mmc: mediatek: add SD write protect support
use mmc core layer's API to support sd write protect

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:24 +01:00
Wolfram Sang a72e8b1700 mmc: sdhi: Add r8a7795 support
Registers are 64bit apart, so we refactor bus_shift handling a little and set
it based on the DT compatible. Also, EXT_ACC is different. It has been tested
on a Salvator-X (Gen3) and, to check for regressions, on a Lager (Gen2).

Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:24 +01:00
Russell King fce1442164 mmc: sdhci: further code simplication
Further simplify the code in sdhci_prepare_data() - we don't set
SDHCI_REQ_USE_DMA anywhere else in the driver, so there is no
need to set it, and then immediately test it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:23 +01:00
Russell King df953925a5 mmc: sdhci: consolidate the DMA/ADMA size/address quicks
Rather than scanning the scatterlist multiple times for each quirk,
scan it once, checking for each possible quirk.  This should be
cheaper due to the length and offset members commonly sharing the
same cache line than scanning the scatterlist multiple times.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:23 +01:00
Russell King a0eaf0f93f mmc: sdhci: prepare DMA address/size quirk handling consolidation
Prepare to consolidate the DMA address/size quirk handling into one
single loop.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:22 +01:00
Russell King add8913d5d mmc: sdhci: cleanup DMA un-mapping
The patch "mmc: sdhci: plug DMA mapping leak on error" added
un-mapping logic to sdhci_tasklet_finish() where it is always
called, thereby preventing the mapping leaking.

Consequently the un-mapping code in sdhci_finish_data() is no
longer needed.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ Split from original "mmc: sdhci: plug DMA mapping leak on error" patch ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:22 +01:00
Russell King 94538e51d6 mmc: sdhci: clean up host cookie handling
Commit d31911b937 ("mmc: sdhci: fix dma memory leak in sdhci_pre_req()")
added a complicated method to manage the DMA map state for the data
transfer, but this complexity is not required.

There are three states:
* Unmapped
* Mapped by sdhci_pre_req()
* Mapped by sdhci_prepare_data()

sdhci_prepare_data() needs to know when the data buffers have been
successfully mapped by sdhci_pre_req(), and if so, there is no need to
map them a second time.

When we come to tear down the mapping, we want to know whether
sdhci_post_req() will be called (which is determined by sdhci_pre_req()
having been previously called) so that we can postpone the unmap
operation.

Hence, it makes sense to simply record when the successful DMA map
happened (via COOKIE_PRE_MAPPED vs COOKIE_MAPPED) rather than having
the complex mechanics involving COOKIE_MAPPED vs COOKIE_GIVEN.

If a mapping is created by sdhci_prepare_data(), we must tear it down
ourselves, without waiting for sdhci_post_req() (hence, the new
COOKIE_MAPPED case).  If the mapping is created by sdhci_pre_req()
then sdhci_post_req() is responsible for tearing the mapping down.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:22 +01:00
Russell King f48f039cd2 mmc: sdhci: always unmap a mapped data transfer in sdhci_post_req()
If the host cookie indicates that the data buffers of a request are
mapped at sdhci_post_req() time, always unmap the data buffers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:21 +01:00
Russell King c0999b720c mmc: sdhci: pass the cookie into sdhci_pre_dma_transfer()
Pass the desired cookie for a successful map.  This is in preparation to
clean up the MAPPED/GIVEN states.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:21 +01:00
Russell King 60c647624a mmc: sdhci: factor out sdhci_pre_dma_transfer() from sdhci_adma_table_pre()
In sdhci_prepare_data(), when SDHCI_REQ_USE_DMA is set, there are two
paths that prepare the data buffers for transfer.  One is when
SDHCI_USE_ADMA is set, and is located inside sdhci_adma_table_pre().
The other is when SDHCI_USE_ADMA is clear, in the else clause of the
above.

Factor out the call to sdhci_pre_dma_transfer() along with its error
checking.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:20 +01:00
Russell King 48857d9b78 mmc: sdhci: move sdhci_pre_dma_transfer()
Move sdhci_pre_dma_transfer() to avoid needing to declare this function
before use.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:20 +01:00
Russell King f55c98f746 mmc: sdhci: factor out common DMA cleanup in sdhci_finish_data()
sdhci_finish_data() has two paths which result in identical DMA cleanup.
One is when SDHCI_USE_ADMA is clear, and the other is just before when
SDHCI_USE_ADMA is set, and is performed within sdhci_adma_table_post().

Simplify the code by removing the 'else' and eliminating the duplicate
inside sdhci_adma_table_post().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:19 +01:00
Russell King 47fa961340 mmc: sdhci: avoid walking SG list for writes
If we are writing data to the card, there is no point in walking the
scatterlist to find out if there are any unaligned entries; this is a
needless waste of CPU cycles.  Avoid this by checking for a non-read
tranfer first.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29 11:03:19 +01:00