Currently we have no way to assign tty->port while performing tty
installation. There are two ways to provide the link tty_struct =>
tty_port. Either by calling tty_port_install from tty->ops->install or
tty_port_register_device called instead of tty_register_device when
the device is being set up after connected.
In this patch we modify most of the drivers to do the latter. When the
drivers use tty_register_device and we have tty_port already, we
switch to tty_port_register_device. So we have the tty_struct =>
tty_port link for free for those.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The termios and other changes mean the other protections needed on the driver
tty arrays should be adequate. Turn it all back on.
This contains pieces folded in from the fixes made to the original patches
| From: Geert Uytterhoeven <geert@linux-m68k.org> (fix m68k)
| From: Paul Gortmaker <paul.gortmaker@windriver.com> (fix cris)
| From: Jiri Kosina <jkosina@suze.cz> (lockdep)
| From: Eric Dumazet <eric.dumazet@gmail.com> (lockdep)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If l2cap_chan_create() fails then it will return from l2cap_sock_kill
since zapped flag of sk is reset.
Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
smp_chan_create might return NULL so we need to check before
dereferencing smp.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When the name of the given entry is empty , the state needs to be
updated accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If the device was not found in a list of found devices names of which
are pending.This may happen in a case when HCI Remote Name Request
was sent as a part of incoming connection establishment procedure.
Hence there is no need to continue resolving a next name as it will
be done upon receiving another Remote Name Request Complete Event.
This will fix a kernel crash when trying to use this entry to resolve
the next name.
Cc: stable@vger.kernel.org
Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not
resolve the name.This will fix a kernel crash when trying to use NULL
pointer.
Cc: stable@vger.kernel.org
Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch moves the hci_conn check to begining of hci_le_conn_
complete_evt in order to improve code's readability and better
error handling.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch does a trivial code refactoring in hci_conn lookup in
hci_le_conn_complete_evt. It performs the hci_conn lookup at the
begining of the function since it is used by both flows (error
and success).
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch changes hci_cs_le_create_conn to perform hci_conn lookup
by state instead of bdaddr.
Since we can have only one LE connection in BT_CONNECT state, we can
perform LE hci_conn lookup by state. This way, we don't rely on
hci_sent_cmd_data helper to find the hci_conn object.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch does some code refactoring in hci_cs_le_create_conn
function. The hci_conn object is only needed in case of failure,
therefore hdev locking and hci_conn lookup were moved to
if-statement scope.
Also, the conn->state check was removed since we should always
close the connection if it fails.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes some unneeded code from hci_cs_le_create_conn.
If the hci_conn is not found, it means this LE connection attempt
was triggered by a thrid-party tool (e.g. hcitool). We should not
create this new hci_conn in LE Create Connection command status
event since it is already properly handled in LE Connection
Complete event.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
We need to check the 'Role' parameter from the LE Connection
Complete Event in order to properly set 'out' and 'link_mode'
fields from hci_conn structure.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces the unlock-and-return statements by the goto
statement.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
lsof command can tell the type of socket processes are using.
Internal lsof uses inode numbers on socket fs to resolve the type of
sockets. Files under /proc/net/, such as tcp, udp, unix, etc provides
such inode information.
Unfortunately bluetooth related protocols don't provide such inode
information. This patch series introduces /proc/net files for the protocols.
This patch against af_bluetooth.c provides facility to the implementation
of protocols. This patch extends bt_sock_list and introduces two exported
function bt_procfs_init, bt_procfs_cleanup.
The type bt_sock_list is already used in some of implementation of
protocols. bt_procfs_init prepare seq_operations which converts
protocol own bt_sock_list data to protocol own proc entry when the
entry is accessed.
What I, lsof user, need is just inode number of bluetooth
socket. However, people may want more information. The bt_procfs_init
takes a function pointer for customizing the show handler of
seq_operations.
In v4 patch, __acquires and __releases attributes are added to suppress
sparse warning. Suggested by Andrei Emeltchenko.
In v5 patch, linux/proc_fs.h is included to use PDE. Build error is
reported by Fengguang Wu.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Move the l2cap channel list chan->global_l under the refcnt
protection and free it based on the refcnt.
Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Reviewed-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Refactor the code in order to use the l2cap_chan_destroy()
from l2cap_chan_put() under the refcnt protection.
Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Reviewed-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes hdev locking in hci_user_passkey_request_evt
since it is not needed. mgmt_user_passkey_request simply calls
mgmt_event which does not require hdev locking at all.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Return values are never used because callers hci_proto_connect_cfm
and hci_proto_disconn_cfm return void.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_NO_FLUSH bit checking by the helper
macro lmp_no_flush_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_SNIFF_SUBR bit checking by the helper
macro lmp_sniffsubr_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_SNIFF bit checking by the helper macro
lmp_sniff_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_RSWITCH bit checking by the helper macro
lmp_rswitch_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_ESCO bit checking by the helper macro
lmp_esco_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_SIMPLE_PAIR bit checking by the helper
macro lmp_ssp_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_LE bit checking by the helper macro
lmp_le_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces all LMP_NO_BREDR bit checking by the helper
macro lmp_bredr_capable.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Do not process A2MP channel in l2cap_security_cfm
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Fix compile warnings below:
...
net/bluetooth/a2mp.c:505:33: warning: symbol 'hdr' shadows an earlier one
net/bluetooth/a2mp.c:498:25: originally declared here
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Print A2MP code format according to Bluetooth style.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Add check that HCI controller is BR/EDR. AMP controller shall not be
managed by mgmt interface and consequently user space.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This handles the merge issue in:
arch/um/drivers/line.c
arch/um/drivers/line.h
And resolves the duplicate patches that were in both trees do to the
tty-next branch not getting merged into 3.6-rc1.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will let us sort out a whole pile of tty related races. The
alternative would be to keep points and refcount the termios objects.
However
1. They are tiny anyway
2. Many devices don't use the stored copies
3. We can remove a pty special case
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I sent GregKH this after the pre-requisites. He dropped the pre-requesites
for good reason and unfortunately then applied this patch. Without this
reverted you get random kernel memory corruption which will make bisecting
anything between it and the properly applied patches a complete sod.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is based on a user space (hciops) patch which never made it
upstream but does make sense to include in the mgmt part of the kernel.
(User space) commit message from Dmitriy Paliy:
"
Page scan interval in fast connectable mode is changed from 22.5 msec to
160 msec to perform less aggressive page scanning. This is done
accordingly to controller vendor recommendation.
Primary concern is that current parameters 22.5 interval, 11.25 window,
and interleaved scanning occupy whole radio bandwidth. Changing interval
to 160 msec should be sufficient for both speeding up connection
establishment and leaving space for other activities, like inquiry scan,
e.g.
"
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This change addresses an L2CAP ERTM throughput problem when a remote
device does not fully utilize the available transmit window.
The L2CAP ERTM transmit window size determines the maximum number of
unacked frames that may be outstanding at any time. It is configured
separately for each direction of an ERTM connection. Each side sends a
configuration request with a tx_win field indicating how many unacked
frames it is capable of receiving before sending an ack. The
configuration response's tx_win field shows how many frames the
transmitter will actually send before waiting for an ack.
It's important to trace both the actual transmit window (to check for
validity of incoming frames) and the number of frames that the
transmitter will send before waiting (to send acks at the appropriate
time). Now there are separate tx_win and ack_win values. ack_win is
updated based on configuration responses, and is used to determine
when acks are sent.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
To help debugging printed hex object use standard bluetooth
specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x;
print manufacturer id and handle in hex instead of int; print opcode
always in 0x%4.4x format; status in 0x%2.2x.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Correct places where CID and PSM were printed as int. For CID: 0x%4.4x
is used and for PSM: 0x%2.2x.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Avoid unneeded type conversion by correcting type specifiers in debug
statements for L2CAP.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The termios and other changes mean the other protections needed on the driver
tty arrays should be adequate. Turn it all back on.
This contains pieces folded in from the fixes made to the original patches
| From: Geert Uytterhoeven <geert@linux-m68k.org> (fix m68k)
| From: Paul Gortmaker <paul.gortmaker@windriver.com> (fix cris)
| From: Jiri Kosina <jkosina@suze.cz> (lockdep)
| From: Eric Dumazet <eric.dumazet@gmail.com> (lockdep)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since AMP controller is not managed by user space do not shut it down.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If AMP controller is first in the list then Bluetooth traffic might
be routed through it (if source is not specified). The patch
prevents this case and also checks that source is BR/EDR.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Improve debugging of hci_conn objects by: adding print to hci_conn
refcounting, adding object spcifier when missing, change conn to hcon
since conn is heavily used for l2cap_conn objects and this is misleading.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Conflicts:
drivers/net/caif/caif_hsi.c
drivers/net/usb/qmi_wwan.c
The qmi_wwan merge was trivial.
The caif_hsi.c, on the other hand, was not. It's a conflict between
1c385f1fdf ("caif-hsi: Replace platform
device with ops structure.") in the net-next tree and commit
39abbaef19 ("caif-hsi: Postpone init of
HIS until open()") in the net tree.
I did my best with that one and will ask Sjur to check it out.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking update from David Miller:
1) Pairing and deadlock fixes in bluetooth from Johan Hedberg.
2) Add device IDs for AR3011 and AR3012 bluetooth chips. From
Giancarlo Formicuccia and Marek Vasut.
3) Fix wireless regulatory deadlock, from Eliad Peller.
4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet.
5) Revert the two commits that added skb_orphan_try(), it causes
erratic bonding behavior with UDP clients and the gains it used to
give are mostly no longer happening due to how BQL works. From Eric
Dumazet.
6) It took two tries, but Thomas Graf fixed a problem wherein we
registered ipv6 routing procfs files before their backend data were
initialized properly.
7) Fix max GSO size setting in be2net, from Sarveshwar Bandi.
8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from
Jason Wang.
9) Fix use of stale SKB data pointer after skb_linearize() call in
batman-adv, from Antonio Quartulli.
10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander
Duyck.
11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn
Mork.
12) Fix suspend/resume and open failure handling in usbnet from Ming
Lei.
13) Attempt to fix device r8169 hangs for certain chips, from Francois
Romieu.
14) Fix advancement of RX dirty pointer in some situations in sh_eth
driver, from Yoshihiro Shimoda.
15) Attempt to fix restart of IPV6 routing table dumps when there is an
intervening table update. From Eric Dumazet.
16) Respect security_inet_conn_request() return value in ipv6 TCP. From
Neal Cardwell.
17) Add another iPAD device ID to ipheth driver, from Davide Gerhard.
18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep
splats, from Eric Dumazet.
19) Make sure all bridge devices, regardless of whether they were
created via netlink or ioctls, have their rtnetlink ops hooked up.
From Thomas Graf and Stephen Hemminger.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
9p: fix min_t() casting in p9pdu_vwritef()
can: flexcan: use be32_to_cpup to handle the value of dt entry
xen/netfront: teardown the device before unregistering it.
bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)
vhost: use USER_DS in vhost_worker thread
ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP
net: l2tp_eth: use LLTX to avoid LOCKDEP splats
mac802154: add missed braces
net: l2tp_eth: fix l2tp_eth_dev_xmit race
net/mlx4_en: Release QP range in free_resources
net/mlx4: Use single completion vector after NOP failure
net/mlx4_en: Set correct port parameters during device initialization
ipheth: add support for iPad
caif-hsi: Add missing return in error path
caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost
caif: Clear shutdown mask to zero at reconnect.
tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request()
ipv6: fib: fix fib dump restart
batman-adv: fix race condition in TT full-table replacement
batman-adv: only drop packets of known wifi clients
...
Pull HID fixes from Jiri Kosina:
"The most important one is a purification of Kconfig for CONFIG_HID;
the inclusion of HID groups and autoloading didn't leave the Kconfig
in a really consistent state. Henrik's patch fixes that. In addition
to that, there are two small fixes for logitech and magicmouse
drivers."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Fix the generic Kconfig options
HID: magicmouse: Correct report range of major / minor axes
HID: logitech: don't use stack based dj_report structures
Conflicts:
drivers/net/usb/qmi_wwan.c
net/batman-adv/translation-table.c
net/ipv6/route.c
qmi_wwan.c resolution provided by Bjørn Mork.
batman-adv conflict is dealing merely with the changes
of global function names to have a proper subsystem
prefix.
ipv6's route.c conflict is merely two side-by-side additions
of network namespace methods.
Signed-off-by: David S. Miller <davem@davemloft.net>
The generic HID driver is obviously not a special driver, so move it
outside of the special drivers menu. Explain the usage and make the
default follow the HID setting. This should simplify migration from
older kernels. While at it, remove the redundant HID_SUPPORT option
and modify the HID and USB_HID entries to better explain the bus
structure.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
cmd_status, cmd_complete and mgmt_event functions are executed in
process context and they are not called inside atomic sections. Thus,
they should use GFP_KERNEL for memory allocation instead of GFP_ATOMIC.
Signed-off-by: Andre Guedes <aguedespe@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
We are allowed to sleep in mgmt_pending_add, so we should use
GFP_KERNEL for memory allocations instead of GFP_ATOMIC.
Signed-off-by: Andre Guedes <aguedespe@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
add_uuid and get_connections mgmt_handlers are executed by user
threads running in kernel-mode.
Signed-off-by: Andre Guedes <aguedespe@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Move AUTO_OFF_TIMEOUT to other constants changing name to
HCI_AUTO_OFF_TIMEOUT and convert to jiffies.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Commit af7985bf85 introduced regression
resulting in complie warnings:
...
net/bluetooth/mgmt.c:3568:27: warning: invalid assignment: |=
net/bluetooth/mgmt.c:3568:27: left side has type restricted __le32
net/bluetooth/mgmt.c:3568:27: right side has type int
net/bluetooth/mgmt.c:3570:27: warning: invalid assignment: |=
net/bluetooth/mgmt.c:3570:27: left side has type restricted __le32
net/bluetooth/mgmt.c:3570:27: right side has type int
net/bluetooth/mgmt.c:3580:21: warning: cast from restricted __le32
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
HCI_Disconnect should only be sent after connection is established.
If connection is not yet established and HCI_Disconnect is called
then disconnection complete will be received with a handle which
does not exist and hence this event will be ignored.
But as mgmt.c will not receive this event, its variable for pending
command is not cleared.This will result in future Disconnect commands
for that BD Address to be blocked with error busy.
Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch replaces the magic value of variable 'reason' by the
proper macro.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Change flags field to matches userspace structure.
This field needs to be converted to little endian before forward it.
Signed-off-by: Jefferson Delfes <jefferson.delfes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Move reset function to common initialization section fixing
not setting HCI_RESET flag for amp_init.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Some functions print u16 objects as "0xc03" others as "0x0c03". Patch
ensures that opcodes printed are the in the same format and consistent
with bluetooth code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Sometimes HCI command sending timeouts and gives error message without
specifying which command causes error. Patch makes sure that opcode
is printed to help debugging.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The HCI constants are always used in form of jiffies. So just
include the conversion from msecs in the define itself. This has the
advantage of making the code where the timeout is used more readable
and avoiding unnecessary conversions.
The patch is similar to commit ba13ccd9 doing the same job for L2CAP
Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Remove magic and use standard HCI cmd timeout
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If remote device sends bogus RFC option with invalid length,
undefined options values are used. Fix this by using defaults when
remote misbehaves.
This also fixes the following warning reported by gcc 4.7.0:
net/bluetooth/l2cap_core.c: In function 'l2cap_config_rsp':
net/bluetooth/l2cap_core.c:3302:13: warning: 'rfc.max_pdu_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.max_pdu_size' was declared here
net/bluetooth/l2cap_core.c:3298:25: warning: 'rfc.monitor_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.monitor_timeout' was declared here
net/bluetooth/l2cap_core.c:3297:25: warning: 'rfc.retrans_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.retrans_timeout' was declared here
net/bluetooth/l2cap_core.c:3295:2: warning: 'rfc.mode' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.mode' was declared here
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
With LE/SMP the completion of a security level elavation from medium to
high is indicated by a HCI Encryption Key Refresh Complete event. The
necessary behavior upon receiving this event is a mix of what's done for
auth_complete and encryption_change, which is also where most of the
event handling code has been copied from.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If we have an unauthenticated key it is not sufficient to acheive high
security. Therefore, when deciding whether to encrypt the link or
request pairing, it is essential to in addition to checking the
existence of a key to also check whether it is authenticated or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The l2cap_conn_del function tries to cancel_sync the security timer, but
when it's called from the timeout function itself a deadlock occurs.
Subsequently the "hcon->l2cap_data = NULL" that's supposed to protect
multiple calls to l2cap_conn_del never gets cleared and when the
connection finally drops we double free's etc which will crash the
kernel.
This patch fixes the issue by using the HCI_CONN_LE_SMP_PEND for
protecting against this. The same flag is also used for the same purpose
in other places in the SMP code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
For BR/EDR pairing is assumed to be finished when connection is
done. For LE if connection is successful it did not necessarily
mean that pairing is also done but if the connection is unsuccessful
it should be assumed that pairing procedure is also finished.
This patch registers a new function with connect_cfm_cb callback for
LE link which sends the pairing complete signal to user space if
connection is unsuccessful.
Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The tk_request function takes the local IO capability as the second last
parameter and the remote IO capability as the last parameter. They were
previously swapped: when we receive a pairing response
req->io_capability contains the local one and rsp->io_capability the
remote one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The macro gives a better idea of the what the error really is.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Most probably a typo, the check should have been for BT_SK_DEFER_SETUP
instead of BT_DEFER_SETUP (which right now only represents a socket
option).
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch enables filtering duplicated advertising reports during
LE scan.
Some LE devices advertise using very small intervals generating lots
of equal advertising report events to the host. Each event generates
a mgmt_device_found event which is copied to userspace.
Enabling this feature, duplicated advertising reports are filtered
at controller's link layer. This way, the controller doesn't wake up
the host to report duplicated advertising reports and, consequently,
less data is copied to userspace.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
A2MP doesn't use part of the L2CAP chan ops API so we just create general
empty function instead of the A2MP specific one.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch renames L2CAP_LE_DEFAULT_MTU macro to L2CAP_LE_MIN_MTU
since it represents the minimum MTU value, not the default MTU
value for LE.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
If user tries to set an invalid MTU value, l2cap_sock_setsockopt_old
should return -EINVAL.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch changes the default MTU value for L2CAP ATT fixed channel
to L2CAP_DEFAULT_MTU (672 octets).
Differently from others L2CAP channels, in L2CAP ATT fixed channel
there is no MTU negotiation. The MTU value for that channel is up to
the L2CAP implementation. The only restriction in L2CAP spec is the
MTU value must not be less than 23 octets.
At ATT protocol level (on top of L2CAP), we have the ATT_MTU which
defines the maximum size of any ATT message sent between client and
server. GATT profile defines ATT_MTU default value to 23 octets. If
a GATT based profile wants to use ATT_MTU greater than 23 octets
(e.g. HID over GATT profile), it should negotiate a new value by
executing the GATT Exchange MTU sub-procedure.
Thus, in order to support any value of ATT_MTU negotiated at ATT
protocol level, our L2CAP implementation should have L2CAP ATT
fixed channel MTU equal or greater than ATT_MAX_MTU (512 octets).
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch changes way LE Connection Complete event with error status are
handled. BDADDR returned in such event packet do not need to be valid and
should not be used to search for existing hci_conn. Instead, any hci_conn
with BT_CONNECT state should be matched since there can be only one
pending LE outgoing connection at any time.
If not handled properly, appriopriate hci_conn will not be removed and
subsequent connection to given peer will try to reuse it without making
actual connection attempt.
2012-05-07 11:21:39.133378 < HCI Command: LE Create Connection (0x08|0x000d) plen 25
bdaddr 00:22:D0:10:13:EE type 1
2012-05-07 11:21:39.138774 > HCI Event: Command Status (0x0f) plen 4
LE Create Connection (0x08|0x000d) status 0x00 ncmd 1
2012-05-07 11:21:44.752854 < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0
2012-05-07 11:21:44.759475 > HCI Event: Command Complete (0x0e) plen 4
LE Create Connection Cancel (0x08|0x000e) ncmd 1
2012-05-07 11:21:44.764479 > HCI Event: LE Meta Event (0x3e) plen 19
LE Connection Complete
status 0x02 handle 0, role master
bdaddr 00:00:00:00:00:00 (Public)
[14898.739425] [6603] hci_connect: hci0 dst 00:22:D0:10:13:EE
[14898.739429] [6603] hci_conn_add: hci0 dst 00:22:D0:10:13:EE
[14898.739434] [6603] hci_conn_init_sysfs: conn ffff880079f03000
[14898.739440] [6603] hci_send_cmd: hci0 opcode 0x200d plen 25
[14898.739443] [6603] hci_send_cmd: skb len 28
[14898.739487] [6603] hci_chan_create: hci0 conn ffff880079f03000
...
[14938.860231] [55] hci_send_cmd: hci0 opcode 0x200e plen 0
...
[14938.876427] [55] hci_le_conn_complete_evt: hci0 status 2
[14938.876433] [55] hci_conn_add: hci0 dst 00:00:00:00:00:00
[14938.876439] [55] hci_conn_init_sysfs: conn ffff88007aeff800
[14938.876454] [55] hci_send_to_control: len 14
[14938.876470] [55] l2cap_connect_cfm: hcon ffff88007aeff800 bdaddr 00:00:00:00:00:00 status 2
[14938.876474] [55] hci_conn_del: hci0 conn ffff88007aeff800 handle 0
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Acked-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
MGMT_STATUS_BUSY should be returned when LE pairing cannot be started due
to another outgoing connection attempt is ongoing.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Only one outgoing LE connection attempt should be possible.
hci_connect() will now return -EBUSY in case there's another pending
outgoing connection.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Trivial fix, let the code cleaner.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Simplify the handling of different ERTM header size. We were the same
check in some places of the code, and more is expected to come, so just
replace them with a function.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
l2cap_att_channel always returns 0 which is not used.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
l2cap_conless_channel always return 0 which is not used.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Jiri Slaby
Alan Cox
Jaganath Kanakkassery
Andrei Emeltchenko
Ram Malovany
Szymon Janc
Gustavo Padovan
Andre Guedes
Masatake YAMATO
Greg Kroah-Hartman
John W. Linville
Johan Hedberg
Mat Martineau
David S. Miller
Linus Torvalds
Henrik Rydberg
Andre Guedes
Vishal Agarwal
Jefferson Delfes
Vinicius Costa Gomes
Andrzej Kaczmarek