Commit Graph

27 Commits

Author SHA1 Message Date
xeb@mail.ru c12b395a46 gre: Support GRE over IPv6
GRE over IPv6 implementation.

Signed-off-by: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14 14:28:32 -07:00
YOSHIFUJI Hideaki 7bc570c8b4 [IPV6] MROUTE: Support multicast forwarding.
Based on ancient patch by Mickael Hoerdt
<hoerdt@clarinet.u-strasbg.fr>, which is available at
<http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-05 22:33:38 +09:00
David S. Miller db8dac20d5 [UDP]: Revert udplite and code split.
This reverts commit db1ed684f6 ("[IPV6]
UDP: Rename IPv6 UDP files."), commit
8be8af8fa4 ("[IPV4] UDP: Move
IPv4-specific bits to other file.") and commit
e898d4db27 ("[UDP]: Allow users to
configure UDP-Lite.").

First, udplite is of such small cost, and it is a core protocol just
like TCP and normal UDP are.

We spent enormous amounts of effort to make udplite share as much code
with core UDP as possible.  All of that work is less valuable if we're
just going to slap a config option on udplite support.

It is also causing build failures, as reported on linux-next, showing
that the changeset was not tested very well.  In fact, this is the
second build failure resulting from the udplite change.

Finally, the config options provided was a bool, instead of a modular
option.  Meaning the udplite code does not even get build tested
by allmodconfig builds, and furthermore the user is not presented
with a reasonable modular build option which is particularly needed
by distribution vendors.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 16:22:02 -08:00
YOSHIFUJI Hideaki db1ed684f6 [IPV6] UDP: Rename IPv6 UDP files.
Rename net/ipv6/udp.c to net/ipv6/udp_ipv6.c
Rename net/ipv6/udplite.c to net/ipv6/udplite_ipv6.c.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04 15:18:22 +09:00
YOSHIFUJI Hideaki e898d4db27 [UDP]: Allow users to configure UDP-Lite.
Let's give users an option for disabling UDP-Lite (~4K).

old:
|    text	   data	    bss	    dec	    hex	filename
|  286498	  12432	   6072	 305002	  4a76a	net/ipv4/built-in.o
|  193830	   8192	   3204	 205226	  321aa	net/ipv6/ipv6.o

new (without UDP-Lite):
|    text	   data	    bss	    dec	    hex	filename
|  284086	  12136	   5432	 301654	  49a56	net/ipv4/built-in.o
|  191835	   7832	   3076	 202743	  317f7	net/ipv6/ipv6.o

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04 15:18:22 +09:00
Glenn Griffin c6aefafb7e [TCP]: Add IPv6 support to TCP SYN cookies
Updated to incorporate Eric's suggestion of using a per cpu buffer
rather than allocating on the stack.  Just a two line change, but will
resend in it's entirety.

Signed-off-by: Glenn Griffin <ggriffin.kernel@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04 15:18:21 +09:00
Pavel Emelyanov 4a61b586cd [IPV6]: Make the ipv6/sysctl_net_ipv6.c compilation cleaner
Since this file is entirely enclosed with the
#ifdef CONFIG_SYSCTL/#endif pair, it's OK to move this
CONFIG_ into a Makefile.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:56:29 -08:00
YOSHIFUJI Hideaki 2a8cc6c890 [IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.
Policy table is implemented as an RCU linear list since we do not expect
large list nor frequent updates.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:58 -08:00
Masahide NAKAMURA 59fbb3a61e [IPV6] MIP6: Loadable module support for MIPv6.
This patch makes MIPv6 loadable module named "mip6".

Here is a modprobe.conf(5) example to load it automatically
when user application uses XFRM state for MIPv6:

alias xfrm-type-10-43 mip6
alias xfrm-type-10-60 mip6

Some MIPv6 feature is not included by this modular, however,
it should not be affected to other features like either IPsec
or IPv6 with and without the patch.
We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt
separately for future work.

Loadable features:
* MH receiving check (to send ICMP error back)
* RO header parsing and building (i.e. RH2 and HAO in DSTOPTS)
* XFRM policy/state database handling for RO

These are NOT covered as loadable:
* Home Address flags and its rule on source address selection
* XFRM sub policy (depends on its own kernel option)
* XFRM functions to receive RO as IPv6 extension header
* MH sending/receiving through raw socket if user application
  opens it (since raw socket allows to do so)
* RH2 sending as ancillary data
* RH2 operation with setsockopt(2)

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:42 -07:00
David S. Miller 30041e4af4 [IPV6]: Fix Makefile thinko.
obj-$(CONFIG_PROC_FS) --> ipv6-$(CONFIG_PROC_FS)

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:53 -07:00
Herbert Xu 7f7d9a6b96 [IPV6]: Consolidate common SNMP code
This patch moves the non-proc SNMP code into addrconf.c and reuses
IPv4 SNMP code where applicable.

As a result we can skip proc.o if /proc is disabled.

Note that I've made a number of functions static since they're only
used by addrconf.c for now.  If they ever get used elsewhere we can
always remove the static.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:52 -07:00
YOSHIFUJI Hideaki 7159039a12 [IPV6]: Decentralize EXPORT_SYMBOLs.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25 22:23:36 -07:00
YOSHIFUJI Hideaki 8c14b7ce22 [IPV6] ADDRCONF: Statically link __ipv6_addr_type() for sunrpc subsystem.
Link __ipv6_addr_type() statically for sunrpc code even if IPv6 is
built as module.

Signed-off-by: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org>
2007-02-26 11:42:52 -08:00
Gerrit Renker ba4e58eca8 [NET]: Supporting UDP-Lite (RFC 3828) in Linux
This is a revision of the previously submitted patch, which alters
the way files are organized and compiled in the following manner:

	* UDP and UDP-Lite now use separate object files
	* source file dependencies resolved via header files
	  net/ipv{4,6}/udp_impl.h
	* order of inclusion files in udp.c/udplite.c adapted
	  accordingly

[NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828)

This patch adds support for UDP-Lite to the IPv4 stack, provided as an
extension to the existing UDPv4 code:
        * generic routines are all located in net/ipv4/udp.c
        * UDP-Lite specific routines are in net/ipv4/udplite.c
        * MIB/statistics support in /proc/net/snmp and /proc/net/udplite
        * shared API with extensions for partial checksum coverage

[NET/IPv6]: Extension for UDP-Lite over IPv6

It extends the existing UDPv6 code base with support for UDP-Lite
in the same manner as per UDPv4. In particular,
        * UDPv6 generic and shared code is in net/ipv6/udp.c
        * UDP-Litev6 specific extensions are in net/ipv6/udplite.c
        * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6
        * support for IPV6_ADDRFORM
        * aligned the coding style of protocol initialisation with af_inet6.c
        * made the error handling in udpv6_queue_rcv_skb consistent;
          to return `-1' on error on all error cases
        * consolidation of shared code

[NET]: UDP-Lite Documentation and basic XFRM/Netfilter support

The UDP-Lite patch further provides
        * API documentation for UDP-Lite
        * basic xfrm support
        * basic netfilter support for IPv4 and IPv6 (LOG target)

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:22:46 -08:00
Joerg Roedel 989e5b96e1 [IPV6]: Seperate sit driver to extra module
This patch removes the driver of the IPv6-in-IPv4 tunnel driver (sit)
from the IPv6 module. It adds an option to Kconfig which makes it
possible to compile it as a seperate module.

Signed-off-by: Joerg Roedel <joro-lkml@zlug.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11 23:59:50 -07:00
Diego Beltrami 0a69452cb4 [XFRM]: BEET mode
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:

http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt

The patch provides only single family support (i.e. inner family =
outer family).

Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: Miika Komu     <miika@iki.fi>
Signed-off-by: Herbert Xu     <herbert@gondor.apana.org.au>
Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi>
Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04 00:31:09 -07:00
Noriaki TAKAMIYA 2c8d7ca0f7 [IPV6] MIP6: Add routing header type 2 transformation.
Add routing header type 2 transformation for Mobile IPv6.
Based on MIPL2 kernel patch.

Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:57 -07:00
Masahide NAKAMURA 1d71627d69 [XFRM] STATE: Introduce route optimization mode.
Route optimization is used with routing header and destination options
header for Mobile IPv6.

At outbound it makes header space like IPsec transport. At inbound it
does nothing because exhdrs.c functions have responsibility to update
skbuff information for these headers.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:37 -07:00
Thomas Graf 101367c2f8 [IPV6]: Policy Routing Rules
Adds support for policy routing rules including a new
local table for routes with a local destination.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:41 -07:00
Herbert Xu b59f45d0b2 [IPSEC] xfrm: Abstract out encapsulation modes
This patch adds the structure xfrm_mode.  It is meant to represent
the operations carried out by transport/tunnel modes.

By doing this we allow additional encapsulation modes to be added
without clogging up the xfrm_input/xfrm_output paths.

Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and
BEET modes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:28:39 -07:00
Herbert Xu d2acc3479c [INET]: Introduce tunnel4/tunnel6
Basically this patch moves the generic tunnel protocol stuff out of
xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c
and tunnel6 respectively.

The reason for this is that the problem that Hugo uncovered is only
the tip of the iceberg.  The real problem is that when we removed the
dependency of ipip on xfrm4_tunnel we didn't really consider the module
case at all.

For instance, as it is it's possible to build both ipip and xfrm4_tunnel
as modules and if the latter is loaded then ipip simply won't load.

After considering the alternatives I've decided that the best way out of
this is to restore the dependency of ipip on the non-xfrm-specific part
of xfrm4_tunnel.  This is acceptable IMHO because the intention of the
removal was really to be able to use ipip without the xfrm subsystem.
This is still preserved by this patch.

So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles
the arbitration between the two.  The order of processing is determined
by a simple integer which ensures that ipip gets processed before
xfrm4_tunnel.

The situation for ICMP handling is a little bit more complicated since
we may not have enough information to determine who it's for.  It's not
a big deal at the moment since the xfrm ICMP handlers are basically
no-ops.  In future we can deal with this when we look at ICMP caching
in general.

The user-visible change to this is the removal of the TUNNEL Kconfig
prompts.  This makes sense because it can only be used through IPCOMP
as it stands.

The addition of the new modules shouldn't introduce any problems since
module dependency will cause them to be loaded.

Oh and I also turned some unnecessary pskb's in IPv6 related to this
patch to skb's.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:46 -08:00
David S. Miller 5bf887f2ff [IPV6]: Fix modular build with netfilter enabled.
Also, drop __exit marker from ipv6_netfilter_fini() as this
can be invoked from inet6_init() error handling paths.

Based upon a report from Stephen Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-10 21:02:21 -08:00
Patrick McHardy bb94aa169e [NETFILTER]: net/ipv[46]/netfilter.c cleanups
Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few
unneccessary includes.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-10 12:54:29 -08:00
Arnaldo Carvalho de Melo 8129765ac0 [IPV6]: Generalise tcp_v6_search_req & tcp_v6_synq_add
More work is needed tho to introduce inet6_request_sock from
tcp6_request_sock, in the same layout considerations as ipv6_pinfo in
inet_sock, next changeset will do that.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:10:36 -08:00
Arnaldo Carvalho de Melo 5324a040cc [INET6_HASHTABLES]: Move inet6_lookup functions to net/ipv6/inet6_hashtables.c
Doing this we allow tcp_diag to support IPV6 even if tcp_diag is compiled
statically and IPV6 is compiled as a module, removing the previous restriction
while not building any IPV6 code if it is not selected.

Now to work on the tcpdiag_register infrastructure and then to rename the whole
thing to inetdiag, reflecting its by then completely generic nature.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:57:29 -07:00
Harald Welte 020b4c12db [NETFILTER]: Move ipv4 specific code from net/core/netfilter.c to net/ipv4/netfilter.c
Netfilter cleanup
- Move ipv4 code from net/core/netfilter.c to net/ipv4/netfilter.c
- Move ipv6 netfilter code from net/ipv6/ip6_output.c to net/ipv6/netfilter.c

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:35:01 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00