as I thought it might be. I'm pushing this in now.
This will allow Thomas to debug his irq work for 3.20.
This adds two new features:
1) Allow traceopoints to be enabled right after mm_init(). By passing
in the trace_event= kernel command line parameter, tracepoints can be
enabled at boot up. For debugging things like the initialization of
interrupts, it is needed to have tracepoints enabled very early. People
have asked about this before and this has been on my todo list. As it
can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm
pushing this now. This way he can add tracepoints into the IRQ set up
and have users enable them when things go wrong.
2) Have the tracepoints printed via printk() (the console) when they
are triggered. If the irq code locks up or reboots the box, having the
tracepoint output go into the kernel ring buffer is useless for
debugging. But being able to add the tp_printk kernel command line
option along with the trace_event= option will have these tracepoints
printed as they occur, and that can be really useful for debugging
early lock up or reboot problems.
This code is not that intrusive and it passed all my tests. Thomas tried
them out too and it works for his needs.
Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUjv3kAAoJEEjnJuOKh9ldLNsIANAe5EmDCBw0WjR72n+G3qOH
NC8calXfkjqHU0bv8Q3dRv20KH4MHOy6l4+EiV9/ovt71LOF3NEyUJ3HuShf9a8b
sWcUhYbX3D1hViQe5sOzv9AWhBCFlKQGoNmQnydX9xa8ivRsBaTGJIGktWlHcwBE
jF1i3fj3l3vRQSS8qZFXp3bzreunlGyPoSHcT6eWQeos+utj4sKwQWTLXTLQeM+6
oQtFKRx7E5yX04qO1qFczS8qIEC6JH2C2jIRYEKUGepaELlnGkb8O7jQV/RaLF4/
6P8VhZFG9YLS7fn7vWu0SnAN+Zwz5LzgjXAZt0FhGtIhLc18Oj8ouHH1UORsdQM=
=Z4Un
-----END PGP SIGNATURE-----
Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"As the merge window is still open, and this code was not as complex as
I thought it might be. I'm pushing this in now.
This will allow Thomas to debug his irq work for 3.20.
This adds two new features:
1) Allow traceopoints to be enabled right after mm_init().
By passing in the trace_event= kernel command line parameter,
tracepoints can be enabled at boot up. For debugging things like
the initialization of interrupts, it is needed to have tracepoints
enabled very early. People have asked about this before and this
has been on my todo list. As it can be helpful for Thomas to debug
his upcoming 3.20 IRQ work, I'm pushing this now. This way he can
add tracepoints into the IRQ set up and have users enable them when
things go wrong.
2) Have the tracepoints printed via printk() (the console) when they
are triggered.
If the irq code locks up or reboots the box, having the tracepoint
output go into the kernel ring buffer is useless for debugging.
But being able to add the tp_printk kernel command line option
along with the trace_event= option will have these tracepoints
printed as they occur, and that can be really useful for debugging
early lock up or reboot problems.
This code is not that intrusive and it passed all my tests. Thomas
tried them out too and it works for his needs.
Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"
* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add tp_printk cmdline to have tracepoints go to printk()
tracing: Move enabling tracepoints to just after rcu_init()
Add the kernel command line tp_printk option that will have tracepoints
that are active sent to printk() as well as to the trace buffer.
Passing "tp_printk" will activate this. To turn it off, the sysctl
/proc/sys/kernel/tracepoint_printk can have '0' echoed into it. Note,
this only works if the cmdline option is used. Echoing 1 into the sysctl
file without the cmdline option will have no affect.
Note, this is a dangerous option. Having high frequency tracepoints send
their data to printk() can possibly cause a live lock. This is another
reason why this is only active if the command line option is used.
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().
This also allows trace_printk() to be used early too.
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
o Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
o The seq_buf code was change to model the seq_file code. I have
a patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was done
to make sure that seq_buf.c is compatible with seq_file.c. I may
try to get that patch in for 3.20.
o The seq_buf.c file was moved to lib/ to remove it from being dependent
on CONFIG_TRACING.
o The printk() was updated to allow for a per_cpu "override" of
the internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow the
NMI to change what printk() does in order to call dump_stack() without
needing to update that code as well.
o Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would wait
till all the NMIs finished, and then it would print the seq_buf
data to the console safely from a non NMI context.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbrnAAoJEEjnJuOKh9ldsCoIAJ3sKIJ5B3jxJJTCHPAx/lZD
GVbV1J1mu4kTAZuhJZOAxW8D6PZGZMyEjg0y6ScDEnBGcjAZ9gTiWCdakPktf9EX
GfaPPqwiL9dZ18J9Qc6uR+7M1Ffpzzwbcc6lJrpoTcjRgkoH9wCiLS9ozFQyYzWb
/7m5UbUM/PIk9WAjLYXPW6UUVtPTPT0RdEQKofMGTeah+vgqj4TXCOROdlxsXXWF
77vqBvPd5TUPWFH9ftzJGDtZS8SroXVKCu3fZIqHgzAU0yqwVtH/JzDTy9u2UYhX
GzDEPeAIdp6m6Uyc406VuIf1QW0gfBgmA0ir80vFoP27uFMM6j5HlF7azgQfx34=
=YBgA
-----END PGP SIGNATURE-----
Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull nmi-safe seq_buf printk update from Steven Rostedt:
"This code is a fork from the trace-3.19 pull as it needed the
trace_seq clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in
practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
- Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
- The seq_buf code was change to model the seq_file code. I have a
patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was
done to make sure that seq_buf.c is compatible with seq_file.c. I
may try to get that patch in for 3.20.
- The seq_buf.c file was moved to lib/ to remove it from being
dependent on CONFIG_TRACING.
- The printk() was updated to allow for a per_cpu "override" of the
internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow
the NMI to change what printk() does in order to call dump_stack()
without needing to update that code as well.
- Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would
wait till all the NMIs finished, and then it would print the
seq_buf data to the console safely from a non NMI context
One added bonus is that this code also makes the NMI dump stack work
on PREEMPT_RT kernels. As printk() includes sleeping locks on
PREEMPT_RT, printk() only writes to console if the console does not
use any rt_mutex converted spin locks. Which a lot do"
* tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/nmi: Fix use of unallocated cpumask_var_t
printk/percpu: Define printk_func when printk is not defined
x86/nmi: Perform a safe NMI stack trace on all CPUs
printk: Add per_cpu printk func to allow printk to be diverted
seq_buf: Move the seq_buf code to lib/
seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF
tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions
tracing: Have seq_buf use full buffer
seq_buf: Add seq_buf_can_fit() helper function
tracing: Add paranoid size check in trace_printk_seq()
tracing: Use trace_seq_used() and seq_buf_used() instead of len
tracing: Clean up tracing_fill_pipe_page()
seq_buf: Create seq_buf_used() to find out how much was written
tracing: Add a seq_buf_clear() helper and clear len and readpos in init
tracing: Convert seq_buf fields to be like seq_file fields
tracing: Convert seq_buf_path() to be like seq_path()
tracing: Create seq_buf layer in trace_seq
to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to the
seq_file code as well in another tree.
Some of the other goodies include:
o Added some "!" (NOT) logic to the tracing filter.
o Fixed the frame pointer logic to the x86_64 mcount trampolines
o Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated
and be called directly by functions that only have a single hook
to them.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbLGAAoJEEjnJuOKh9ldRV4H/3NcLbgGB2iu96la1zdYE6pG
Q7cDJMxXK80YIIL70h9G0IItcD4t62LMb72lfBnMGRj3msgFb3AgISW57EuI0Pxk
xk24wuIPoTG2S7v9sc3SboNFwO8qbtIjxD2OBmqIUrGo2sZIiGjyj3gX7mCY3uzL
WB2bUOSFz/22OgaANinR5EELHA3pZZCf54Vz1K9ndmtK0xp0j1a7xJShD6TrMdYv
mZ3zH5ViIhW4A3mdcMceh6fy2JLQAiEKF0uPTvcMMz7NlVul0mxyL/+10P7AE/3R
Ehw4fzmm4NDshPDtBOkKH0LsppgXzuItFuQUTpact3JlqTg++bV6onSsrkt1hlY=
=Z7Cm
-----END PGP SIGNATURE-----
Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"There was a lot of clean ups and minor fixes. One of those clean ups
was to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to
the seq_file code as well in another tree.
Some of the other goodies include:
- Added some "!" (NOT) logic to the tracing filter.
- Fixed the frame pointer logic to the x86_64 mcount trampolines
- Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated and be
called directly by functions that only have a single hook to them"
* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
tracing: Truncated output is better than nothing
tracing: Add additional marks to signal very large time deltas
Documentation: describe trace_buf_size parameter more accurately
tracing: Allow NOT to filter AND and OR clauses
tracing: Add NOT to filtering logic
ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
ftrace/x86: Get rid of ftrace_caller_setup
ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
ftrace/x86: Simplify save_mcount_regs on getting RIP
ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
ftrace/x86: Have static tracing also use ftrace_caller_setup
ftrace/x86: Have static function tracing always test for function graph
kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
kprobes/ftrace: Recover original IP if pre_handler doesn't change it
tracing/trivial: Fix typos and make an int into a bool
tracing: Deletion of an unnecessary check before iput()
...
The initial reason for this patch is that I noticed that:
if (len > TRACE_BUF_SIZE)
is off by one. In this code, if len == TRACE_BUF_SIZE, then it means we
have truncated the last character off the output string. If we truncate
two or more characters then we exit without printing.
After some discussion, we decided that printing truncated data is better
than not printing at all so we should just use vscnprintf() and remove
the test entirely. Also I have updated memcpy() to copy the NUL char
instead of setting the NUL in a separate step.
Link: http://lkml.kernel.org/r/20141127155752.GA21914@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To be really paranoid about writing out of bound data in
trace_printk_seq(), add another check of len compared to size.
Link: http://lkml.kernel.org/r/20141119144004.GB2332@dhcp128.suse.cz
Suggested-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the seq_buf->len will soon be +1 size when there's an overflow, we
must use trace_seq_used() or seq_buf_used() methods to get the real
length. This will prevent buffer overflow issues if just the len
of the seq_buf descriptor is used to copy memory.
Link: http://lkml.kernel.org/r/20141114121911.09ba3d38@gandalf.local.home
Reported-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing_fill_pipe_page() logic is a little confusing with the
use of count saving the seq.len and reusing it.
Instead of subtracting a number that is calculated from the saved
value of the seq.len from seq.len, just save the seq.len at the start
and if we need to reset it, just assign it again.
When the seq_buf overflow is len == size + 1, the current logic will
break. Changing it to use a saved length for resetting back to the
original value is more robust and will work when we change the way
seq_buf sets the overflow.
Link: http://lkml.kernel.org/r/20141118161546.GJ23958@pathway.suse.cz
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Create a seq_buf layer that trace_seq sits on. The seq_buf will not
be limited to page size. This will allow other usages of seq_buf
instead of a hard set PAGE_SIZE one that trace_seq has.
Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org
Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding a trace_seq_has_overflowed() which returns true if the trace_seq
had too much written into it allows us to simplify the code.
Instead of checking the return value of every call to trace_seq_printf()
and friends, they can all be called normally, and at the end we can
return !trace_seq_has_overflowed() instead.
Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq
overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function
was created called trace_handle_return() which takes a trace_seq and
returns these enums. Using this helper function also simplifies the
code.
This change also makes it possible to remove the return values of
trace_seq_printf() and friends. They should instead just be
void functions.
Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Consecutive seq_puts calls with literal strings can be merged to a
single call. This reduces the size of the generated code, and can also
lead to slight .rodata reduction (because of fewer nul and padding
bytes). It should also shave a off a few clock cycles.
Link: http://lkml.kernel.org/r/1415479332-25944-3-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using seq_printf to print a simple string or a single character is a
lot more expensive than it needs to be, since seq_puts and seq_putc
exist.
These patches do
seq_printf(m, s) -> seq_puts(m, s)
seq_printf(m, "%s", s) -> seq_puts(m, s)
seq_printf(m, "%c", c) -> seq_putc(m, c)
Subsequent patches will simplify further.
Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to the documentation, adding "traceoff_on_warning" to the boot
command line should be enough to enable the feature. But right now it is
necessary to specify "traceoff_on_warning=". Along with fixing that, also
verify if the value passed, if any, is either "0" or "off".
Link: http://lkml.kernel.org/r/20141112231400.GL12281@uudg.org
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the read loop in trace_buffers_splice_read() keeps failing due to
memory allocation failures without reading even a single page then this
function will keep busy looping.
Remove the risk for that by exiting the function if memory allocation
failures are seen.
Link: http://lkml.kernel.org/r/1415309167-2373-2-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
lockup:
# trace-cmd record -e raw_syscalls:* -F false
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
...
Call Trace:
[<ffffffff8105b580>] ? __wake_up_common+0x90/0x90
[<ffffffff81092e25>] wait_on_pipe+0x35/0x40
[<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
[<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
[<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
[<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
[<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
[<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<ffffffff8112415d>] do_splice_to+0x6d/0x90
[<ffffffff81126971>] SyS_splice+0x7c1/0x800
[<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8
The problem is this: tracing_buffers_splice_read() calls
ring_buffer_wait() to wait for data in the ring buffers. The buffers
are not empty so ring_buffer_wait() returns immediately. But
tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
meaning it only wants to read a full page. When the full page is not
available, tracing_buffers_splice_read() tries to wait again with
ring_buffer_wait(), which again returns immediately, and so on.
Fix this by adding a "full" argument to ring_buffer_wait() which will
make ring_buffer_wait() wait until the writer has left the reader's
page, i.e. until full-page reads will succeed.
Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in
Cc: stable@vger.kernel.org # 3.16+
Fixes: b1169cc69b ("tracing: Remove mock up poll wait function")
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull timer and time updates from Thomas Gleixner:
"A rather large update of timers, timekeeping & co
- Core timekeeping code is year-2038 safe now for 32bit machines.
Now we just need to fix all in kernel users and the gazillion of
user space interfaces which rely on timespec/timeval :)
- Better cache layout for the timekeeping internal data structures.
- Proper nanosecond based interfaces for in kernel users.
- Tree wide cleanup of code which wants nanoseconds but does hoops
and loops to convert back and forth from timespecs. Some of it
definitely belongs into the ugly code museum.
- Consolidation of the timekeeping interface zoo.
- A fast NMI safe accessor to clock monotonic for tracing. This is a
long standing request to support correlated user/kernel space
traces. With proper NTP frequency correction it's also suitable
for correlation of traces accross separate machines.
- Checkpoint/restart support for timerfd.
- A few NOHZ[_FULL] improvements in the [hr]timer code.
- Code move from kernel to kernel/time of all time* related code.
- New clocksource/event drivers from the ARM universe. I'm really
impressed that despite an architected timer in the newer chips SoC
manufacturers insist on inventing new and differently broken SoC
specific timers.
[ Ed. "Impressed"? I don't think that word means what you think it means ]
- Another round of code move from arch to drivers. Looks like most
of the legacy mess in ARM regarding timers is sorted out except for
a few obnoxious strongholds.
- The usual updates and fixlets all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
timekeeping: Fixup typo in update_vsyscall_old definition
clocksource: document some basic timekeeping concepts
timekeeping: Use cached ntp_tick_length when accumulating error
timekeeping: Rework frequency adjustments to work better w/ nohz
timekeeping: Minor fixup for timespec64->timespec assignment
ftrace: Provide trace clocks monotonic
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
seqcount: Add raw_write_seqcount_latch()
seqcount: Provide raw_read_seqcount()
timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
timekeeping: Create struct tk_read_base and use it in struct timekeeper
timekeeping: Restructure the timekeeper some more
clocksource: Get rid of cycle_last
clocksource: Move cycle_last validation to core code
clocksource: Make delta calculation a function
wireless: ath9k: Get rid of timespec conversions
drm: vmwgfx: Use nsec based interfaces
drm: i915: Use nsec based interfaces
timekeeping: Provide ktime_get_raw()
hangcheck-timer: Use ktime_get_ns()
...
to the ftrace function callback infrastructure. It's introducing a
way to allow different functions to call directly different trampolines
instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which always
had a different trampoline, but the function tracer trampoline was called
and did basically nothing, and then the function graph tracer trampoline
was called. The difference now, is that the function graph tracer
trampoline can be called directly if a function is only being traced by
the function graph trampoline. If function tracing is also happening on
the same function, the old way is still done.
The accounting for this takes up more memory when function graph tracing
is activated, as it needs to keep track of which functions it uses.
I have a new way that wont take as much memory, but it's not ready yet
for this merge window, and will have to wait for the next one.
Another big change was the removal of the ftrace_start/stop() calls that
were used by the suspend/resume code that stopped function tracing when
entering into suspend and resume paths. The stop of ftrace was done
because there was some function that would crash the system if one called
smp_processor_id()! The stop/start was a big hammer to solve the issue
at the time, which was when ftrace was first introduced into Linux.
Now ftrace has better infrastructure to debug such issues, and I found
the problem function and labeled it with "notrace" and function tracing
can now safely be activated all the way down into the guts of suspend
and resume.
Other changes include clean ups of uprobe code.
Clean up of the trace_seq() code.
And other various small fixes and clean ups to ftrace and tracing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn
xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5
FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y
bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb
Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47
rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q=
=fwQY
-----END PGP SIGNATURE-----
Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This pull request has a lot of work done. The main thing is the
changes to the ftrace function callback infrastructure. It's
introducing a way to allow different functions to call directly
different trampolines instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which
always had a different trampoline, but the function tracer trampoline
was called and did basically nothing, and then the function graph
tracer trampoline was called. The difference now, is that the
function graph tracer trampoline can be called directly if a function
is only being traced by the function graph trampoline. If function
tracing is also happening on the same function, the old way is still
done.
The accounting for this takes up more memory when function graph
tracing is activated, as it needs to keep track of which functions it
uses. I have a new way that wont take as much memory, but it's not
ready yet for this merge window, and will have to wait for the next
one.
Another big change was the removal of the ftrace_start/stop() calls
that were used by the suspend/resume code that stopped function
tracing when entering into suspend and resume paths. The stop of
ftrace was done because there was some function that would crash the
system if one called smp_processor_id()! The stop/start was a big
hammer to solve the issue at the time, which was when ftrace was first
introduced into Linux. Now ftrace has better infrastructure to debug
such issues, and I found the problem function and labeled it with
"notrace" and function tracing can now safely be activated all the way
down into the guts of suspend and resume
Other changes include clean ups of uprobe code, clean up of the
trace_seq() code, and other various small fixes and clean ups to
ftrace and tracing"
* tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
ftrace: Add warning if tramp hash does not match nr_trampolines
ftrace: Fix trampoline hash update check on rec->flags
ring-buffer: Use rb_page_size() instead of open coded head_page size
ftrace: Rename ftrace_ops field from trampolines to nr_trampolines
tracing: Convert local function_graph functions to static
ftrace: Do not copy old hash when resetting
tracing: let user specify tracing_thresh after selecting function_graph
ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on()
tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
s390/ftrace: remove check of obsolete variable function_trace_stop
arm64, ftrace: Remove check of obsolete variable function_trace_stop
Blackfin: ftrace: Remove check of obsolete variable function_trace_stop
metag: ftrace: Remove check of obsolete variable function_trace_stop
microblaze: ftrace: Remove check of obsolete variable function_trace_stop
MIPS: ftrace: Remove check of obsolete variable function_trace_stop
parisc: ftrace: Remove check of obsolete variable function_trace_stop
sh: ftrace: Remove check of obsolete variable function_trace_stop
sparc64,ftrace: Remove check of obsolete variable function_trace_stop
tile: ftrace: Remove check of obsolete variable function_trace_stop
ftrace: x86: Remove check of obsolete variable function_trace_stop
...
Expose the new NMI safe accessor to clock monotonic to the tracer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The "uptime" trace clock added in:
commit 8aacf017b0
tracing: Add "uptime" trace clock that uses jiffies
has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
(u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds. An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).
Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).
Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com
Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017b0 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, tracing_thresh works only if we specify it before selecting
function_graph tracer. If we do the opposite, tracing_thresh will change
it's value, but it will not be applied.
To fix it, we add update_thresh callback which is called whenever
tracing_thresh is updated and for function_graph tracer we register
handler which reinitializes tracer depending on tracing_thresh.
Link: http://lkml.kernel.org/p/20140718111727.GA3206@stfomichev-desktop.yandex.net
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing,
so add it, to be consistent with __trace_printk/__trace_bprintk.
Those functions are all called by the same function: trace_printk().
Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently trace option stacktrace is not applicable for
trace_printk with constant string argument, the reason is
in __trace_puts/__trace_bputs ftrace_trace_stack is missing.
In contrast, when using trace_printk with non constant string
argument(will call into __trace_printk/__trace_bprintk), then
trace option stacktrace is workable, this inconstant result
will confuses users a lot.
Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.com
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Disabling reading and writing to the trace file should not be able to
disable all function tracing callbacks. There's other users today
(like kprobes and perf). Reading a trace file should not stop those
from happening.
Cc: stable@vger.kernel.org # 3.0+
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The freeing of an instance, if max data is configured, there will be
per cpu data structures created. But these are not freed when the instance
is deleted, which causes a memory leak.
A new helper function is added that frees the individual buffers within a
trace array, instead of duplicating the code. This way changes made for one
are applied to the other (normal buffer vs max buffer).
Link: http://lkml.kernel.org/r/87k38pbake.fsf@sejong.aot.lge.com
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The recent addition of saved_cmdlines_size file had some remaining
(minor - mostly coding style) issues. Fix them by passing pointer
name to sizeof() and using scnprintf().
Link: http://lkml.kernel.org/p/1402384295-23680-1-git-send-email-namhyung@kernel.org
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The per_cpu buffers are created one per possible CPU. But these do
not mean that those CPUs are online, nor do they even exist.
With the addition of the ring buffer polling, it assumes that the
caller polls on an existing buffer. But this is not the case if
the user reads trace_pipe from a CPU that does not exist, and this
causes the kernel to crash.
Simple fix is to check the cpu against buffer bitmask against to see
if the buffer was allocated or not and return -ENODEV if it is
not.
More updates were done to pass the -ENODEV back up to userspace.
Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.com
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When an instance is created, it also gets a snapshot ring buffer
allocated (with minimum of pages). But when it is deleted the snapshot
buffer is not. There was a helper function added to match the allocation
of these ring buffers to a way to free them, but it wasn't used by
the deletion of an instance. Using that helper function solves this
memory leak.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Yoshihiro Yunomae reported that the ring buffer data for a trace
instance does not get properly cleaned up when it fails. He proposed
a patch that manually cleaned the data up and addad a bunch of labels.
The labels are not needed because all trace array is allocated with
a kzalloc which initializes it to 0 and all kfree()s can take a NULL
pointer and will ignore it.
Adding a new helper function free_trace_buffers() that can also take
null buffers to free the buffers that were allocated by
allocate_trace_buffers().
Link: http://lkml.kernel.org/r/20140605223522.32311.31664.stgit@yunodevel
Reported-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce saved_cmdlines_size file for changing the number of saved pid-comms.
saved_cmdlines currently stores 128 command names using SAVED_CMDLINES, but
'no-existing processes' names are often lost in saved_cmdlines when we
read the trace data. So, by introducing saved_cmdlines_size file, we can
now change the 128 command names saved to something much larger if needed.
When we write a value to saved_cmdlines_size, the number of the value will
be stored in pid-comm list:
# echo 1024 > /sys/kernel/debug/tracing/saved_cmdlines_size
Here, 1024 command names can be stored. The default number is 128 and the maximum
number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
want to avoid losing any command names, we need to set 32768 to
saved_cmdlines_size.
We can read the maximum number of the list:
# cat /sys/kernel/debug/tracing/saved_cmdlines_size
128
Link: http://lkml.kernel.org/p/20140605012427.22115.16173.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If allocation of the max_buffer fails on boot up, the error path will
free both per_cpu data structures from the buffers. With the new redesign
of the code, those structures are freed if allocations failed. That is,
the helper function that allocates the buffers will free the per cpu data
on failure. No need to do it again. In fact, the second free will cause
a bug as the code can not handle a double free.
Link: http://lkml.kernel.org/p/20140603042803.27308.30956.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the conversion of the saved_cmdlines output to use seq_read, there
is now a race between accessing the values of the saved_cmdlines and
the writing to them. The trace_cmdline_lock needs to be taken at
the start and stop of the seq calls.
A new __trace_find_cmdline() call is created to allow for the look up
to happen without taking the lock.
Fixes: 42584c81c5 tracing: Have saved_cmdlines use the seq_read infrastructure
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to prevent the saved cmdline cache from being filled when
tracing is not active, the comms are only recorded after a trace event
is recorded.
The problem is, a comm can fail to be recorded if the trace_cmdline_lock
is held. That lock is taken via a trylock to allow it to happen from
any context (including NMI). If the lock fails to be taken, the comm
is skipped. No big deal, as we will try again later.
But! Because of the code that was added to only record after an event,
we may not try again later as the recording is made as a oneshot per
event per CPU.
Only disable the recording of the comm if the comm is actually recorded.
Fixes: 7ffbd48d5c "tracing: Cache comms only after an event occurred"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Current tracing_saved_cmdlines_read() implementation is naive; It allocates
a large buffer, constructs output data to that buffer for each read
operation, and then copies a portion of the buffer to the user space
buffer. This has several issues such as slow memory allocation, high
CPU usage, and even corruption of the output data.
The seq_read infrastructure is made to handle this type of work.
By converting it to use seq_read() the code becomes smaller, simplified,
as well as correct.
Link: http://lkml.kernel.org/p/20140220084431.3839.51793.stgit@yunodevel
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_printk() is used to debug fast paths within the kernel. Places
that gets called in any context (interrupt or NMI) or thousands of
times a second. Something you do not want to do with a printk().
In order to make it completely lockless as it needs a temporary buffer
to handle some of the string formatting, a page is created per cpu for
every context (four per cpu; normal, softirq, irq, NMI).
Since trace_printk() should only be used for debugging purposes,
there's no reason to waste memory on these buffers on a production
system. That means, trace_printk() should never be used unless a
developer is debugging their kernel. There's macro magic to allocate
the buffers if trace_printk() is used anywhere in the kernel.
To help enforce that trace_printk() isn't used outside of development,
when it is used, a nasty banner is displayed on bootup (or when a module
is loaded that uses trace_printk() and the kernel core does not).
Here's the banner:
**********************************************************
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** trace_printk() being used. Allocating extra memory. **
** **
** This means that this is a DEBUG kernel and it is **
** unsafe for produciton use. **
** **
** If you see this message and you are not debugging **
** the kernel, report this immediately to your vendor! **
** **
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
**********************************************************
That should hopefully keep developers from trying to sneak in a
trace_printk() or two.
Link: http://lkml.kernel.org/p/20140528131440.2283213c@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace uses of &__get_cpu_var for address calculation with this_cpu_ptr.
Link: http://lkml.kernel.org/p/alpine.DEB.2.10.1404291415560.18364@gentwo.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.
Completely remove the different wait_poll types from the tracers
and have them all use the default one now.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When reading from trace_pipe, if tracing is off but nothing was read
it should block. If something is read and tracing is off, then EOF
is returned. If tracing is on and there's nothing to read, it will block.
But because the check of whether tracing is off and something was read
is done after the block on the pipe, it is hit or miss if the EOF is
returned or not leading to inconsistent behavior.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds static to the following functions:
-cycle_t buffer_ftrace_now
-void free_snapshot
-int trace_selftest_startup_dynamic_tracing
Link: http://lkml.kernel.org/p/20140417214442.d7abc7c0b0e4b90e7fedecc9@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for having tracers enabled in instances, the max_lock
should be unique as updating the max for one tracer is a separate
operation than updating it for another tracer using a different max.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for letting the latency tracers be used by instances,
remove the global tracing_max_latency variable and add a max_latency
field to the trace_array that the latency tracers will now use.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
