Commit Graph

443 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds 0ce5c79f38 power supply and reset changes for the v4.14 series
* New chip/feature support
  - bq27xxx: support updating battery config from DT
  - bq24190: support loading battery charge info from DT
  - LTC2941: add LTC2942/LTC2944 support
  - max17042: add ACPI support
  - max1721x: new driver
 * Misc
  - Move bq27xxx w1 driver from w1 into power-supply subsystem
  - Introduce power_supply_set_input_current_limit_from_supplier
  - constify stuff
  - some minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlmxSSQACgkQ2O7X88g7
 +ppf2xAAliDRdNPuxpKu69syiX+iNPaPHTqRXd41sAJlEX2IYv/avcoNFcGySplR
 gJYdlbx2Qd86aBaMf92h4tGihk2iNa87It9xkA+JgO3wNoKiZ+b5lk///IDk8aDF
 8sknSTXJtGYse0jwBRKTT4cL1ZW/g10heUxPr8AiX8nL4QhMf0TIxXawWQteAZDE
 dDz/UEAqbINooD5HtP716Z0e3U6FyWTqFc6UzuR+n8c6wC6n/JA6h91ASAHUmExT
 aH1JuQyrmucBp8cLhP01ThSkoIdGbcZM7nJ3WQBlfDricFJXa/yThug/mHvjztJX
 3U1UOZBqsb/LL9Dh5hl/D3+i+7qI29KCyUZiYUrwoiSjxM/AtOB2t4cAWmU7+PnJ
 V3coYC1s2DlwYcLIUiyE2zmVWIDcOuuOJhQjCdpUBTPvz83nQ0v5oXMn7VnQmWlO
 8Z/IRWnW90v2D2iHmSPAwFG3ATfH0pAP8G/4Wrudti+ymSxAhXaLqQcj3HHjKjvI
 3CEGOPAN9Opuof7SfkIVuoOjPzazx5GUpAZQKi8LS87KRdXN4ics3vbNB6VBDR50
 FzVhJJZBTeAOJCDogInuu4gDa0L5Ikfdkhqc+nvNfcdsE2k3H8Nb//+UPiPnfgEA
 mEFyp9gaY08/3ylDEHxp3N/W7POrL4QelTjv0dvdKW70i7KtWpA=
 =iy5f
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset changes from Sebastian Reichel:
 "New chip/feature support:
   - bq27xxx: support updating battery config from DT
   - bq24190: support loading battery charge info from DT
   - LTC2941: add LTC2942/LTC2944 support
   - max17042: add ACPI support
   - max1721x: new driver

  Misc:
   - Move bq27xxx w1 driver from w1 into power-supply subsystem
   - Introduce power_supply_set_input_current_limit_from_supplier
   - constify stuff
   - some minor fixes"

* tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: bq27xxx: enable writing capacity values for bq27421
  power: supply: bq24190_charger: Get input_current_limit from our supplier
  power: supply: bq24190_charger: Export 5V boost converter as regulator
  power: supply: bq24190_charger: Add power_supply_battery_info support
  power: supply: bq24190_charger: Add property system-minimum-microvolt
  power: supply: bq24190_charger: Enable devicetree config
  dt-bindings: power: supply: Add docs for TI BQ24190 battery charger
  power: supply: bq27xxx: Remove duplicate chip data arrays
  power: supply: bq27xxx: Enable data memory update for certain chips
  power: supply: bq27xxx: Add chip IDs for previously shadowed chips
  power: supply: bq27xxx: Create single chip data table
  power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
  power: supply: bq24190_charger: Add input_current_limit property
  power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  power: supply: max17042_battery: Fix compiler warning
  power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
  power: supply: make device_attribute const
  power: supply: max17042_battery: Fix ACPI interrupt issues
  power: supply: max17042_battery: Add support for ACPI enumeration
  power: supply: lp8788: Make several arrays static const * const
  ...
2017-09-09 14:44:39 -07:00
Jaghathiswari Rankappagounder Natarajan a97db8818c drivers: w1: add hwmon temp support for w1_therm
This change adds hwmon temp support for w1_therm.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31 18:50:14 +02:00
Jaghathiswari Rankappagounder Natarajan b78165f028 drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
Inside the w1_slave_show function refactor the code to read the temp
into a separate function.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31 18:50:14 +02:00
Jaghathiswari Rankappagounder Natarajan 2eb7954809 drivers: w1: add hwmon support structures
This patch has changes to w1.h/w1.c generic files to add (optional) hwmon
support structures.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31 18:50:14 +02:00
Andrew Worsley f6887531c0 drivers: w1: Add 1w slave driver for DS28E05 EEPROM
Add a one wire driver for the DS28E05 one wire slave chip. This chip
requires OverDrive support to talk to it.

Signed-off-by: Andrew Worsley <amworsley@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:23:29 +02:00
Andrew Worsley 54865314f5 drivers: w1: Extend 1W master driver DS2482 with module option to support PPM/SPU/1WS features
Extend the one wire DS2482 master driver with a module option that allows support
for PPM/SPU/1WS interface modes to be requested. This allows support of chips
that require one or more of these features such as the DS28E05.

Signed-off-by: Andrew Worsley <amworsley@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:23:29 +02:00
Colin Ian King e5cf84e822 w1: ds2438: make several functions static
The functions w1_ds2438_get_page, w1_ds2438_get_temperature,
w1_ds2438_change_config_bit and w1_ds2438_get_voltage are local to
the source and do not need to be in global scope, so make it static.

Cleans up sparse warnings:
symbol 'w1_ds2438_get_page' was not declared. Should it be static?
symbol 'w1_ds2438_get_temperature' was not declared. Should it be static?
symbol 'w1_ds2438_change_config_bit' was not declared. Should it be static?
symbol 'w1_ds2438_get_voltage' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:20:01 +02:00
Johannes Poehlmann c64163e237 w1: ds1wm: add messages to make incorporation in mfd-drivers easier
w1: ds1wm: add messages to make incorporation in mfd-drivers easier

Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:20:01 +02:00
Johannes Poehlmann 1d925f45d8 w1: ds1wm: silence interrupts on HW before claiming the interrupt
w1: ds1wm: silence interrupts on HW before claiming the interrupt.
This way avoid possible invalid interrupts in the initialization phase.

Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:20:01 +02:00
Johannes Poehlmann c3248f0ee0 w1: ds1wm: add level interrupt modes
w1: ds1wm: add level interrupt modes

Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:20:01 +02:00
Johannes Poehlmann baa8055de0 w1: ds1wm: make endian clean and use standard io memory accessors
o Make endian clean, make HW-endianness configurable.

o Use ioread*, iowrite* instead of __raw_readb,__raw_writeb
  to also use memory-barriers when accessing HW-registers.
  We do not want reordering to happen here.

Both changes are tightly coupled, so I do them in one patch

Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:20:01 +02:00
Johannes Poehlmann 242b476f82 w1: ds1wm: fix register offset (bus shift) calculation
Replace incorrect register offsett calculation by
direct configuration of bus_shift in mfd-cell.

Indirect definition of address-shift by resource size
was unobvious and was wrong (should have used a binary log).

Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:20:01 +02:00
Arvind Yadav d7b3cf892a w1: ds2490: constify usb_device_id and fix space before '[' error
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.

Fix checkpatch.pl error:
ERROR: space prohibited before open square bracket '['.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:18:19 +02:00
Arvind Yadav a890d56a9d w1: constify attribute_group structures.
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work with
const attribute_group. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:15:16 +02:00
Andrew F. Davis 55a9db6791 power: supply: move HDQ interface for bq27xxx from w1 to power/supply
The HDQ interface driver should be in this folder just like the I2C
interface driver. Move this driver out of drivers/w1/slave and into
drivers/power/supply.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 15:17:39 +02:00
Gustavo A. R. Silva c89876dda0 w1: omap-hdq: fix error return code in omap_hdq_probe()
platform_get_irq() returns an error code, but the omap_hdq
driver ignores it and always returns -ENXIO. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error.

Print error message and propagate the return value of
platform_get_irq on failure.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 16:48:15 +02:00
Alex A. Mihaylov 2c927c0c73 w1: Fix slave count on 1-Wire bus (resend)
1-Wire bus have very fast algorith for exchange with single slave
device. Fix incorrect count of slave devices on connect second slave
device. This case on slave device probe() step we need use generic
(multislave) functions for read/write device.

Signed-off-by: Alex A. Mihaylov <minimumlaw@rambler.ru>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 16:45:16 +02:00
Andrew F. Davis de0d6dbdbd w1: Add subsystem kernel public interface
Like other subsystems we should be able to define slave devices outside
of the w1 directory. To do this we move public facing interface
definitions to include/linux/w1.h and rename the internal definition
file to w1_internal.h.

As w1_family.h and w1_int.h contained almost entirely public
driver interface definitions we simply removed these files and
moved the remaining definitions into w1_internal.h.

With this we can now start to move slave devices out of w1/slaves and
into the subsystem based on the function they implement, again like
other drivers.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:54:54 +02:00
Andrew F. Davis 50fa2951bd w1: Organize driver source to natural/common order
Structures and functions should be ordered such that forward declaration
use is minimized.

MODULE_* macros should immediately follow the structures and functions
upon which they act.

Remaining MODULE_* macros should be at the end of the file in
alphabetical order.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25 18:23:03 +02:00
Andrew F. Davis 91bd2855ed w1: Remove unneeded use of assert() and remove w1_log.h
The only use of assert() is in matrox_w1.c and is used to check the input
to probe() from the PCI subsystem for NULL values, these are guaranteed
to be populated and no other PCI driver makes this check, remove this.

As this was the only definition in w1_log.h, remove this also.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 18:20:57 +02:00
Andrew F. Davis b04e085499 w1: Use kernel common min() implementation
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 18:20:27 +02:00
Mariusz Bialonczyk e447d4c068 w1: w1_ds2760.h: fix defines indentation
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17 15:10:49 +09:00
Mariusz Bialonczyk e3af95e607 w1: add support for DS2438 Smart Battery Monitor
Detailed information about support and provided sysfs files
in my next commit which creates a documentation file:
Documentation/w1/slaves/w1_ds2438

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17 15:10:49 +09:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Wei Yongjun 90beaf6422 w1: ds2405: use module_w1_family to simplify the code
module_w1_family() makes the code simpler by eliminating
boilerplate code.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Wei Yongjun 45003a1e25 w1: ds2490: use kmemdup rather than duplicating its implementation
Use kmemdup rather than duplicating its implementation.

Generated by: scripts/coccinelle/api/memdup.cocci

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Andrew F. Davis 8a0934bf9b w1: Fixup source file headers
Remove filename from file, this is not done anymore as it doesn't
add anything and usually is incorrect as filename change often.

Also shorten the GPL to the more common address-less version and
remove excess white-space.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:48:03 +01:00
Maciej S. Szmigiero d2ce4ea1a0 w1: don't leak refcount on slave attach failure in w1_attach_slave_device()
Near the beginning of w1_attach_slave_device() we increment a w1 master
reference count.
Later, when we are going to exit this function without actually attaching
a slave device (due to failure of __w1_attach_slave_device()) we need to
decrement this reference count back.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: stable@vger.kernel.org
Fixes: 9fcbbac5de ("w1: process w1 netlink commands in w1_process thread")
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Maciej S. Szmigiero dd6478d68b w1: add DS2405 addressable switch driver
This adds a driver for a DS2405 1-wire single-channel addressable switch.
The DS2405 can also work as a single-channel binary remote sensor.

This driver supports two attributes: "state" and "output" which are the
same attribute names as supported by existing DS2406, DS2408 and DS2413
drivers.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Maciej S. Szmigiero 61cd1b4cd1 w1: ds2490: USB transfer buffers need to be DMAable
ds2490 driver was doing USB transfers from / to buffers on a stack.
This is not permitted and made the driver non-working with vmapped stacks.

Since all these transfers are done under the same bus_mutex lock we can
simply use shared buffers in a device private structure for two most common
of them.

While we are at it, let's also fix a comparison between int and size_t in
ds9490r_search() which made the driver spin in this function if state
register get requests were failing.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: stable <stable@vger.kernel.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Christophe JAILLET 8333eb153a w1: omap_hdq: Free resources on error path
In case of error returned by '_omap_hdq_reset()', free resources as done
elsewhere in this function.

This patch slighly changes the semantic of the code. It now propagates the
error code returned by '_omap_hdq_reset()' instead of returning -EINVAL
unconditionally.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Wei Yongjun a46b195ca0 w1: fix timeout_us parameter description
Fix 'timeout_us' parameter description.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:56:05 +02:00
Ben Werbowyj 368451ea74 drivers: w1: style corrections-pointers-blanklines-comparisons
Correct pointer notations to include whitespace between
variable type and "*" character. Inserted blank line
after variable declatations at two locations.
Rearranged comparison within an if statment to have the
constant on the right-hand side.

Signed-off-by: Ben Werbowyj <ben.werbowyj@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:56:04 +02:00
Ben Werbowyj aaf16f7d98 drivers: w1: removed assignment from within if statement
Assignment of variable count removed from within an if statment.
This was done at two locations in the file.

Signed-off-by: Ben Werbowyj <ben.werbowyj@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:56:04 +02:00
Ben Werbowyj d4c3f97a06 drivers: w1: style corrections for parenthesis and braces
Inserted whitespace between command and open parenthesis
at two locations. Removed new line between open brace and
command/declaration at two locations.

Signed-off-by: Ben Werbowyj <ben.werbowyj@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:56:04 +02:00
H. Nikolaus Schaller ecfaf0c42f w1:omap_hdq: fix regression
Commit e93762bbf6 ("w1: masters: omap_hdq: add support for 1-wire
mode") added a statement to clear the hdq_irqstatus flags in
hdq_read_byte().

If the hdq reading process is scheduled slowly or interrupts are
disabled for a while the hardware read activity might already be
finished on entry of hdq_read_byte().  And hdq_isr() already has set the
hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the
TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel.

This means there is no need to wait and the hdq_read_byte() can just
read the byte from the hdq controller.

By resetting hdq_irqstatus to 0 the read process is forced to be always
waiting again (because the if statement always succeeds) but the
hardware will not issue another RXCOMPLETE interrupt.  This results in a
false timeout.

After such a situation the hdq bus hangs.

Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.com
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:40 -04:00
Andrew F. Davis 939fc83229 w1: add helper macro module_w1_family
The helper macro module_w1_family can be used in module drivers that
only register a w1 driver in their module init functions.  Add this
macro and use it in all applicable drivers.

Link: http://lkml.kernel.org/r/20160531204313.20979-2-afd@ti.com
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:39 -04:00
Andrew F. Davis 098f9fb0c9 w1: remove need for ida and use PLATFORM_DEVID_AUTO
PLATFORM_DEVID_AUTO can be used to have the platform core assign a
unique ID instead of manually creating one with IDA.  Do this in all
applicable drivers.

Link: http://lkml.kernel.org/r/20160531204313.20979-1-afd@ti.com
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:39 -04:00
Ben Sen 0a19f129d7 w1: add ability to set (SRAM) and store (EEPROM) configuration for temp sensors like DS18B20
Since many temperature sensors come "preconfigured" with a lower
precision, people are stuck at that precision when running on a kernel
based device (unlike the Dallas 1Wire library for e.g. Arduino, which
supports writing the configuration/scratchpad). This patch adds write
support for the scratchpad/precision registers via w1_slave sysfs.

Signed-off-by: Ben Sen <0.x29a.0@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:37:49 -07:00
Dan Carpenter b9c11a2333 w1: silence an uninitialized variable warning
If kstrtoint() returns -ERANGE then "tmp" is uninitialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polaykov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:04:19 -07:00
Geert Uytterhoeven 8f8f41d160 w1: Spelling s/minmum/minimum/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:04:19 -07:00
Mariusz Bialonczyk f704938c0e w1: enable active pullup for DS2482 by default
This commit enables the active pullup (APU bit) by default for
the DS2482 1-Wire master.

>From the DS2482 datasheet:
"The APU bit controls whether an active pullup (controlled slew-rate
transistor) or a passive pullup (Rwpu resistor) will be used to drive
a 1-Wire line from low to high. When APU = 0, active pullup is disabled
(resistor mode). Active Pullup should always be selected unless there is
only a single slave on the 1-Wire line."

According to the module author, Ben Gardner:
"It doesn't look like active pullup would cause any hurt if there
is only a single slave."
And my tests with multiple and single slaves on 1-Wire bus
confirms that.

This active pullup can be manually disabled using the introduced
module parameter:
  active_pullup = 0

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:04:19 -07:00
Jiri Kosina cf09d6428d w1: w1_process() is not freezable kthread
w1_process() calls try_to_freeze(), but the thread doesn't mark itself
freezable through set_freezable(), so the try_to_freeze() call is useless.

Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-11 19:23:28 -08:00
Andreas Kemnade 7b46a105db omap_hdq: fix usecount handling
hdq_usecount was set to zero after a successful read, so
omap_hdq_put could not properly free resources which leads
e.g. to increasing usecounts in lsmod output

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08 14:57:30 -08:00
Linus Torvalds 400c5bd5a5 power supply and reset changes for the v4.4 series
* new AXP20X USB Power driver
  * new Qualcomm SMBB driver
  * new TPS65217 Charger driver
  * BQ24257: add BQ24250/BQ24251 support
  * overhaul bq27x00 battery driver, rename to bq27xxx
  * misc. fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJWOn8oAAoJENju1/PIO/qahrEP/RPHXvTxtYv8YvhaFbqcr07x
 11gRB8RRthKK5woC3s70QKlMtcHijFeCwKuacut+7tfgK2oZDIm+Bd43Pl93aypU
 Yk4oTwop5OyrLsGIGiTIPPV9HTwr4q69Or2Q91mqUAUe2wGB5uCuJiJmCowUwfZs
 piv+ISLSOcH+i1bTx3hQ7h7axsdAlaSz2o1JprZaxm3rM67M8zF1ZHSK7wlpAeBa
 DiDrtUvEDCeLL8dmCA9xkFV4yFB9T+KNh0730N2RY+zlZS6WjSpzryqwsUWWyQ6h
 U9gFgcs+DjVaGHuMsIX2zm7xXfXHgUBtXdSQoCBhpSrZsdufMsT/8VQqVZ0yqpXL
 pQ2EXy63k6tXnXEyAKTA0tAOX/WZNfmmNblkea4JiyZULn7b/WH09waMZUBJqe84
 Yn3SatVdGDN4nawsivzdiM3zR9/WTE9R3DmEeAE+g1RRsSraNwWlkzpDXcmnWmbc
 DoprnjLsDJfqL3/1ysF2V2I4B26Bws73qq6UUjJ4KEGWf8Y1fVawxrbcYmnrvg1K
 zW/saEgtl70FYqtee/0lIqTpjOZRX/O6QH5i8p7VC8cUzftX0Twc8MvfvpamDywX
 Cr1Y7pIMEhc6TFUP5lOzx9xJelA5PHJMpAT+02fh6YXMAzCcBUzL113rY5zBrVVl
 gce0iHDKAybmvww77z1r
 =0be4
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 - new AXP20X USB Power driver
 - new Qualcomm SMBB driver
 - new TPS65217 Charger driver
 - BQ24257: add BQ24250/BQ24251 support
 - overhaul bq27x00 battery driver, rename to bq27xxx
 - misc fixes and cleanups

* tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: bq27xxx_battery: Remove unneeded dependency in Kconfig
  power: bq27xxx_battery: move irq handler to i2c section
  power: bq27xxx_battery: fix platform probe
  twl4030_charger: add missing iio dependency
  power_supply: charger-manager: add missing of_node_put
  Documentation: power: bq24257: Document exported sysfs entries
  power: bq24257: Add various device-specific sysfs properties
  power: bq24257: Allow input current limit sysfs access
  power: bq24257: Add input DPM voltage threshold setting support
  power: bq24257: Add over voltage protection setting support
  power: bq24257: Add SW-based approach for Power Good determination
  power: bq24257: Allow manual setting of input current limit
  power: bq24257: Add bit definition for temp sense enable
  power: bq24257: Add basic support for bq24250/bq24251
  dt: power: bq24257-charger: Cover additional devices
  power: bq24257: Simplify bq24257_power_supply_init()
  power: bq24257: Use managed power supply register
  power: bq24257: Streamline input current limit setup
  power: bq24257: Remove IRQ config through stat-gpios
  power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health()
  ...
2015-11-05 12:28:15 -08:00
Dmitry Torokhov 36fccce0e8 W1: w1-gpio - switch to using dev_pm_ops
Let's stop using legacy platform driver hooks for power management and
switch to using the standard dev_pm_ops-based hooks.

Also, instead of guarding PM methods with #ifdef CONFIG_PM annotate them
as __maybe_unused as it provides better compile coverage.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 21:45:05 -07:00
Vignesh R e93762bbf6 w1: masters: omap_hdq: add support for 1-wire mode
This patches makes following changes to omap_hdq driver
 - Enable 1-wire mode.
 - Implement w1_triplet callback to facilitate search rom
   procedure and auto detection of 1-wire slaves.
 - Proper enabling and disabling of interrupt.
 - Cleanups (formatting and return value checks).

HDQ mode remains unchanged.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 04:47:09 +01:00
Levente Kurusa 5052436dcb drivers/w1/w1_int.c: call put_device if device_register fails
Currently, memsetting and kfreeing the device is bad behaviour.  The
device will have a reference count of 1 and hence can cause trouble
because it has kfree'd.  Proper way to handle a failed device_register is
to call put_device right after it fails.

Signed-off-by: Levente Kurusa <levex@linux.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 04:47:09 +01:00
Andrew F. Davis 424cfde49a power: bq27xxx_battery: Platform initialization must declare a device
When initialized as a platform device the initializer must now specify
a device. An empty device name is no longer valid.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23 16:23:12 +02:00