Commit Graph

2024 Commits

Author SHA1 Message Date
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Linus Torvalds ba5b56cb3e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits)
  ceph: document unlocked d_parent accesses
  ceph: explicitly reference rename old_dentry parent dir in request
  ceph: document locking for ceph_set_dentry_offset
  ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug
  ceph: protect d_parent access in ceph_d_revalidate
  ceph: protect access to d_parent
  ceph: handle racing calls to ceph_init_dentry
  ceph: set dir complete frag after adding capability
  rbd: set blk_queue request sizes to object size
  ceph: set up readahead size when rsize is not passed
  rbd: cancel watch request when releasing the device
  ceph: ignore lease mask
  ceph: fix ceph_lookup_open intent usage
  ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNC
  ceph: fix bad parent_inode calc in ceph_lookup_open
  ceph: avoid carrying Fw cap during write into page cache
  libceph: don't time out osd requests that haven't been received
  ceph: report f_bfree based on kb_avail rather than diffing.
  ceph: only queue capsnap if caps are dirty
  ceph: fix snap writeback when racing with writes
  ...
2011-07-26 13:38:50 -07:00
Josh Durgin 029bcbd8b0 rbd: set blk_queue request sizes to object size
This improves performance since more requests can be merged.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-07-26 11:29:35 -07:00
Yehuda Sadeh 79e3057c4c rbd: cancel watch request when releasing the device
We were missing this cleanup, so when a device was released
the osd didn't clean up its watchers list, so following notifications
could be slow as osd needed to timeout on the client.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-26 11:29:04 -07:00
Linus Torvalds 8ded371f81 Merge branch 'for-3.1/drivers' of git://git.kernel.dk/linux-block
* 'for-3.1/drivers' of git://git.kernel.dk/linux-block:
  cciss: do not attempt to read from a write-only register
  xen/blkback: Add module alias for autoloading
  xen/blkback: Don't let in-flight requests defer pending ones.
  bsg: fix address space warning from sparse
  bsg: remove unnecessary conditional expressions
  bsg: fix bsg_poll() to return POLLOUT properly
2011-07-25 10:38:18 -07:00
Linus Torvalds bbd9d6f7fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
2011-07-22 19:02:39 -07:00
Linus Torvalds a99a7d1436 Merge branch 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mips: Fix i8253 clockevent fallout
  i8253: Cleanup outb/inb magic
  arm: Footbridge: Use common i8253 clockevent
  mips: Use common i8253 clockevent
  x86: Use common i8253 clockevent
  i8253: Create common clockevent implementation
  i8253: Export i8253_lock unconditionally
  pcpskr: MIPS: Make config dependencies finer grained
  pcspkr: Cleanup Kconfig dependencies
  i8253: Move remaining content and delete asm/i8253.h
  i8253: Consolidate definitions of PIT_LATCH
  x86: i8253: Consolidate definitions of global_clock_event
  i8253: Alpha, PowerPC: Remove unused asm/8253pit.h
  alpha: i8253: Cleanup remaining users of i8253pit.h
  i8253: Remove I8253_LOCK config
  i8253: Make pcsp sound driver use the shared i8253_lock
  i8253: Make pcspkr input driver use the shared i8253_lock
  i8253: Consolidate all kernel definitions of i8253_lock
  i8253: Unify all kernel declarations of i8253_lock
  i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-22 16:51:56 -07:00
Linus Torvalds 8181780c16 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  dt: include linux/errno.h in linux/of_address.h
  of/address: Add of_find_matching_node_by_address helper
  dt: remove extra xsysace platform_driver registration
  tty/serial: Add devicetree support for nVidia Tegra serial ports
  dt: add empty of_property_read_u32[_array] for non-dt
  dt: bindings: move SEC node under new crypto/
  dt: add helper function to read u32 arrays
  tty/serial: change of_serial to use new of_property_read_u32() api
  dt: add 'const' for of_property_read_string parameter **out_string
  dt: add helper functions to read u32 and string property values
  tty: of_serial: support for 32 bit accesses
  dt: document the of_serial bindings
  dt/platform: allow device name to be overridden
  drivers/amba: create devices from device tree
  dt: add of_platform_populate() for creating device from the device tree
  dt: Add default match table for bus ids
2011-07-22 14:53:38 -07:00
Linus Torvalds 111ad119d1 Merge branch 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.
  xen: tmem: self-ballooning and frontswap-selfshrinking
  xen: Add module alias to autoload backend drivers
  xen: Populate xenbus device attributes
  xen: Add __attribute__((format(printf... where appropriate
  xen: prepare tmem shim to handle frontswap
  xen: allow enable use of VGA console on dom0
2011-07-22 13:45:15 -07:00
Al Viro e7f5909707 kill useless checks for sb->s_op == NULL
never is...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:44:21 -04:00
Grant Likely 8c11642a50 Merge commit 'v3.0-rc7' into devicetree/next 2011-07-15 20:11:34 -06:00
Grant Likely 5d10302f46 dt: remove extra xsysace platform_driver registration
After commit 1c48a5c93, "dt: Eliminate
of_platform_{,un}register_driver", the xsysace driver attempts to
register two platform_drivers with the same name, which a) doesn't
work, and b) isn't necessary.  This patch merges the two
platform_drivers.

Reported-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-14 05:33:52 -06:00
Stephen M. Cameron 07d0c38e7d cciss: do not attempt to read from a write-only register
Most smartarrays will tolerate it, but some new ones don't.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>

Note: this is a regression caused by commit 1ddd5049
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-09 09:04:12 +02:00
Bastian Blank a7e9357f10 xen/blkback: Add module alias for autoloading
Add xen-backend:vbd module alias to the xen-blkback module. This allows
automatic loading of the module.

Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-30 12:48:25 -04:00
Daniel Stodden b4726a9df2 xen/blkback: Don't let in-flight requests defer pending ones.
Running RING_FINAL_CHECK_FOR_REQUESTS from make_response is a bad
idea. It means that in-flight I/O is essentially blocking continued
batches. This essentially kills throughput on frontends which unplug
(or even just notify) early and rightfully assume addtional requests
will be picked up on time, not synchronously.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
[v1: Rebased and fixed compile problems]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-30 12:48:06 -04:00
Joe Perches 08b8bfc1c6 xen: Add __attribute__((format(printf... where appropriate
Use the compiler to verify printf formats and arguments.

Fix fallout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-30 12:14:40 -04:00
Jens Axboe 7b28afe01a Merge branch 'for-3.0-important' of git://git.drbd.org/linux-2.6-drbd into for-linus 2011-06-30 10:10:50 +02:00
Lars Ellenberg 86e1e98e5c drbd: we should write meta data updates with FLUSH FUA
We used to write these with BIO_RW_BARRIER aka REQ_HARDBARRIER (unless
disabled in the configuration). The correct semantic now would be to
write with FLUSH/FUA.
For example, with activity log transactions, FUA alone is not enough, we
need the corresponding bitmap update (and all related application
updates) on stable storage as well.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:46 +02:00
Lars Ellenberg cb6518cbef drbd: when receive times out on meta socket, also check last receive time on data socket
If we have an asymetrically congested network, we may send P_PING,
but due to congestion, the corresponding P_PING_ACK would time out,
and we would drop a (congested, but otherwise) healthy connection
("PingAck did not arrive in time.")

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:44 +02:00
Lars Ellenberg 5a8b424276 drbd: account bitmap IO during resync as resync-(related-)-io
If we have a good resync rate, we will frequently update the on-disk
bitmap, which, if not accounted for as resync io, may let an otherwise
idle device appear to be "busy", and cause us to throttle resync.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:43 +02:00
Lars Ellenberg 8ccee20e3e drbd: don't cond_resched_lock with IRQs disabled
The last commit, drbd: add missing spinlock to bitmap receive,
introduced a cond_resched_lock(), where the lock in question is taken
with irqs disabled.

As we must not schedule with IRQs disabled,
and cond_resched_lock_irq() does not exist, yet,
we re-aquire the spin_lock_irq() for each bitmap page processed in turn.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:42 +02:00
Lars Ellenberg 829c608786 drbd: add missing spinlock to bitmap receive
During bitmap exchange, when using the RLE bitmap compression scheme,
we have a code path that can set the whole bitmap at once.

To avoid holding spin_lock_irq() for too long, we used to lock out other
bitmap modifications during bitmap exchange by other means, and then,
knowing we have exclusive access to the bitmap, modify it without
the spinlock, and with IRQs enabled.

Since we now allow local IO to continue, potentially setting additional
bits during the bitmap receive phase, this is no longer true, and we get
uncoordinated updates of bitmap members, causing bm_set to no longer
accurately reflect the total number of set bits.

To actually see this, you'd need to have a large bitmap, use RLE bitmap
compression, and have busy IO during sync handshake and bitmap exchange.

Fix this by taking the spin_lock_irq() in this code path as well, but
calling cond_resched_lock() after each page worth of bits processed.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:41 +02:00
Philipp Reisner 0cfdd247d1 drbd: Use the correct max_bio_size when creating resync requests
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:40 +02:00
Ralf Baechle 334955ef96 i8253: Create linux/i8253.h and use it in all 8253 related files
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

 arch/arm/mach-footbridge/isa-timer.c |    2 +-
 arch/mips/cobalt/time.c              |    2 +-
 arch/mips/jazz/irq.c                 |    2 +-
 arch/mips/kernel/i8253.c             |    2 +-
 arch/mips/mti-malta/malta-time.c     |    2 +-
 arch/mips/sgi-ip22/ip22-time.c       |    2 +-
 arch/mips/sni/time.c                 |    2 +-
 arch/x86/kernel/apic/apic.c          |    2 +-
 arch/x86/kernel/apm_32.c             |    2 +-
 arch/x86/kernel/hpet.c               |    2 +-
 arch/x86/kernel/i8253.c              |    2 +-
 arch/x86/kernel/time.c               |    2 +-
 drivers/block/hd.c                   |    2 +-
 drivers/clocksource/i8253.c          |    2 +-
 drivers/input/gameport/gameport.c    |    2 +-
 drivers/input/joystick/analog.c      |    2 +-
 drivers/input/misc/pcspkr.c          |    2 +-
 include/linux/i8253.h                |   11 +++++++++++
 sound/drivers/pcsp/pcsp.h            |    2 +-
 19 files changed, 29 insertions(+), 18 deletions(-)
2011-06-09 15:01:37 +02:00
Linus Torvalds 4f1ba49efa Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Use hlist_entry() for io_context.cic_list.first
  cfq-iosched: Remove bogus check in queue_fail path
  xen/blkback: potential null dereference in error handling
  xen/blkback: don't call vbd_size() if bd_disk is NULL
  block: blkdev_get() should access ->bd_disk only after success
  CFQ: Fix typo and remove unnecessary semicolon
  block: remove unwanted semicolons
  Revert "block: Remove extra discard_alignment from hd_struct."
  nbd: adjust 'max_part' according to part_shift
  nbd: limit module parameters to a sane value
  nbd: pass MSG_* flags to kernel_recvmsg()
  block: improve the bio_add_page() and bio_add_pc_page() descriptions
2011-06-04 08:11:26 +09:00
Linus Torvalds 0f48f26009 block: fix mismerge of the DISK_EVENT_MEDIA_CHANGE removal
Jens' back-merge commit 698567f3fa ("Merge commit 'v2.6.39' into
for-2.6.40/core") was incorrectly done, and re-introduced the
DISK_EVENT_MEDIA_CHANGE lines that had been removed earlier in commits

 - 9fd097b149 ("block: unexport DISK_EVENT_MEDIA_CHANGE for
   legacy/fringe drivers")

 - 7eec77a181 ("ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd
   and ide-cd")

because of conflicts with the "g->flags" updates near-by by commit
d4dc210f69 ("block: don't block events on excl write for non-optical
devices")

As a result, we re-introduced the hanging behavior due to infinite disk
media change reports.

Tssk, tssk, people! Don't do back-merges at all, and *definitely* don't
do them to hide merge conflicts from me - especially as I'm likely
better at merging them than you are, since I do so many merges.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-02 05:29:19 +09:00
Dan Carpenter 9b83c77121 xen/blkback: potential null dereference in error handling
blkbk->pending_pages can be NULL here so I added a check for it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
[v1: Redid the loop a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-01 09:28:21 -04:00
Laszlo Ersek 6464920a6e xen/blkback: don't call vbd_size() if bd_disk is NULL
...because vbd_size() dereferences bd_disk if bd_part is NULL.

Signed-off-by: Laszlo Ersek<lersek@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-01 09:28:20 -04:00
Liu Yuan 6917f83ffe drivers, block: virtio_blk: Replace cryptic number with the macro
It is easier to figure out the context by reading SCSI_SENSE_BUFFERSIZE
instead of plain '96'.

Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-30 11:14:13 +09:30
Christoph Hellwig 7a7c924cf0 virtio_blk: allow re-reading config space at runtime
Wire up the virtio_driver config_changed method to get notified about
config changes raised by the host.  For now we just re-read the device
size to support online resizing of devices, but once we add more
attributes that might be changeable they could be added as well.

Note that the config_changed method is called from irq context, so
we'll have to use the workqueue infrastructure to provide us a proper
user context for our changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-30 11:14:13 +09:30
Linus Torvalds f310642123 Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param
  x86 idle: deprecate "no-hlt" cmdline param
  x86 idle APM: deprecate CONFIG_APM_CPU_IDLE
  x86 idle floppy: deprecate disable_hlt()
  x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it
  x86 idle: clarify AMD erratum 400 workaround
  idle governor: Avoid lock acquisition to read pm_qos before entering idle
  cpuidle: menu: fixed wrapping timers at 4.294 seconds
2011-05-29 11:18:09 -07:00
Len Brown 3b70b2e5fc x86 idle floppy: deprecate disable_hlt()
Plan to remove floppy_disable_hlt in 2012, an ancient
workaround with comments that it should be removed.

This allows us to remove clutter and a run-time branch
from the idle code.

WARN_ONCE() on invocation until it is removed.

cc: x86@kernel.org
cc: stable@kernel.org # .39.x
Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-29 03:39:15 -04:00
Namhyung Kim 5988ce2396 nbd: adjust 'max_part' according to part_shift
The 'max_part' parameter determines how many partitions are supported
on each nbd device. However the actual number can be changed to the
power of 2 minus 1 form during the module initialization as
alloc_disk() is called with (1 << part_shift) for some reason.

So adjust 'max_part' also at least for consistency with loop and brd.
It is exported via sysfs already, and a user should check this value
after module loading if [s]he wants to use that number correctly
(i.e. fdisk or something).

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-28 14:44:46 +02:00
Namhyung Kim 3b2710824e nbd: limit module parameters to a sane value
The 'max_part' parameter controls the number of maximum partition
a nbd device can have. However if a user specifies very large
value it would exceed the limitation of device minor number and
can cause a kernel oops (or, at least, produce invalid device
nodes in some cases).

In addition, specifying large 'nbds_max' value causes same
problem for the same reason.

On my desktop, following command results to the kernel bug:

$ sudo modprobe nbd max_part=100000
 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65!
 invalid opcode: 0000 [#1] SMP
 last sysfs file: /sys/devices/virtual/block/nbd4/range
 CPU 1
 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom

 Pid: 2522, comm: modprobe Tainted: G        W   2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO
 RIP: 0010:[<ffffffff8115aa08>]  [<ffffffff8115aa08>] internal_create_group+0x2f/0x166
 RSP: 0018:ffff8801009f1de8  EFLAGS: 00010246
 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3
 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478
 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478
 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0
 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400
 FS:  00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0)
 Stack:
  ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80
  ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468
  0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a
 Call Trace:
  [<ffffffff812e8f6e>] ? device_add+0x4f1/0x5e4
  [<ffffffff812e7a80>] ? dev_set_name+0x41/0x43
  [<ffffffff8115ab6a>] sysfs_create_group+0x13/0x15
  [<ffffffff810b857e>] blk_trace_init_sysfs+0x14/0x16
  [<ffffffff811ee58b>] blk_register_queue+0x4c/0xfd
  [<ffffffff811f3bdf>] add_disk+0xe4/0x29c
  [<ffffffffa007e2ab>] nbd_init+0x2ab/0x30d [nbd]
  [<ffffffffa007e000>] ? 0xffffffffa007dfff
  [<ffffffff8100020f>] do_one_initcall+0x7f/0x13e
  [<ffffffff8107ab0a>] sys_init_module+0xa1/0x1e3
  [<ffffffff814f3542>] system_call_fastpath+0x16/0x1b
 Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83
  7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49
 RIP  [<ffffffff8115aa08>] internal_create_group+0x2f/0x166
  RSP <ffff8801009f1de8>
 ---[ end trace 753285ffbf72c57c ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-28 14:44:46 +02:00
Namhyung Kim 35fbf5bcf4 nbd: pass MSG_* flags to kernel_recvmsg()
Unlike kernel_sendmsg(), kernel_recvmsg() requires passing flags explicitly
via last parameter instead of struct msghdr.msg_flags. Therefore calls to
sock_xmit(lo, 0, ..., MSG_WAITALL) have not been processed properly by tcp
layer wrt. the flag. Fix it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-28 14:44:46 +02:00
Namhyung Kim ac04fee0b5 loop: export module parameters
Export 'max_loop' and 'max_part' parameters to sysfs so user can know
that how many devices are allowed and how many partitions are supported.

If 'max_loop' is 0, there is no restriction on the number of loop devices.
User can create/use the devices as many as minor numbers available. If
'max_part' is 0, it means simply the device doesn't support partitioning.

Also note that 'max_part' can be adjusted to power of 2 minus 1 form if
needed. User should check this value after the module loading if he/she
want to use that number correctly (i.e. fdisk, mknod, etc.).

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-27 07:59:25 +02:00
Namhyung Kim 8892cbaf68 brd: export module parameters
Export 'rd_nr', 'rd_size' and 'max_part' parameters to sysfs so user can
know that how many devices are allowed, how big each device is and how
many partitions are supported. If 'max_part' is 0, it means simply the
device doesn't support partitioning.

Also note that 'max_part' can be adjusted to power of 2 minus 1 form if
needed. User should check this value after the module loading if he/she
want to use that number correctly (i.e. fdisk, mknod, etc.).

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Namhyung Kim 13868b76ab brd: fix comment on initial device creation
If 'rd_nr' param was not specified, 16 (can be adjusted via
CONFIG_BLK_DEV_RAM_COUNT) devices would be created by default
but comment said 1. Fix it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Namhyung Kim af46566885 brd: handle on-demand devices correctly
When finding or allocating a ram disk device, brd_probe() did not take
partition numbers into account so that it can result to a different
device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4
for simplicity) :

$ sudo modprobe brd max_part=15
$ ls -l /dev/ram*
brw-rw---- 1 root disk 1,  0 2011-05-25 15:41 /dev/ram0
brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1
brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2
brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3
$ sudo mknod /dev/ram4 b 1 64
$ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256
256+0 records in
256+0 records out
1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s
namhyung@leonhard:linux$ ls -l /dev/ram*
brw-rw---- 1 root disk 1,    0 2011-05-25 15:41 /dev/ram0
brw-rw---- 1 root disk 1,   16 2011-05-25 15:41 /dev/ram1
brw-rw---- 1 root disk 1,   32 2011-05-25 15:41 /dev/ram2
brw-rw---- 1 root disk 1,   48 2011-05-25 15:41 /dev/ram3
brw-r--r-- 1 root root 1,   64 2011-05-25 15:45 /dev/ram4
brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64

After this patch, /dev/ram4 - instead of /dev/ram64 - was
accessed correctly.

In addition, 'range' passed to blk_register_region() should
include all range of dev_t that RAMDISK_MAJOR can address.
It does not need to be limited by partition numbers unless
'rd_nr' param was specified.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Namhyung Kim 315980c868 brd: limit 'max_part' module param to DISK_MAX_PARTS
The 'max_part' parameter controls the number of maximum partition
a brd device can have. However if a user specifies very large
value it would exceed the limitation of device minor number and
can cause a kernel panic (or, at least, produce invalid device
nodes in some cases).

On my desktop system, following command kills the kernel. On qemu,
it triggers similar oops but the kernel was alive:

$ sudo modprobe brd max_part=100000
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae
 PGD 7af1067 PUD 7b19067 PMD 0
 Oops: 0000 [#1] SMP
 last sysfs file:
 CPU 0
 Modules linked in: brd(+)

 Pid: 44, comm: insmod Tainted: G        W   2.6.39-qemu+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81110a9a>]  [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae
 RSP: 0018:ffff880007b15d78  EFLAGS: 00000286
 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8
 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760
 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000
 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000
 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063
 FS:  0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980)
 Stack:
  ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe
  ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a
  0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000
 Call Trace:
  [<ffffffff81143c0a>] kobject_add_internal+0xdf/0x1a0
  [<ffffffff81143da1>] kobject_add_varg+0x41/0x50
  [<ffffffff81143e6b>] kobject_add+0x64/0x66
  [<ffffffff8113bbe7>] blk_register_queue+0x5f/0xb8
  [<ffffffff81140f72>] add_disk+0xdf/0x289
  [<ffffffffa00040df>] brd_init+0xdf/0x1aa [brd]
  [<ffffffffa0004000>] ? 0xffffffffa0003fff
  [<ffffffffa0004000>] ? 0xffffffffa0003fff
  [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e
  [<ffffffff8108516c>] sys_init_module+0x9c/0x1dc
  [<ffffffff812ff4bb>] system_call_fastpath+0x16/0x1b
 Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30
  8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89
 RIP  [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae
  RSP <ffff880007b15d78>
 CR2: 0000000000000058
 ---[ end trace aebb1175ce1f6739 ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Namhyung Kim a2cba2913c brd: get rid of unused members from struct brd_device
brd_refcnt, brd_offset, brd_sizelimit and brd_blocksize in struct
brd_device seem to be copied from struct loop_device but they're
not used anywhere. Let get rid of them.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Linus Torvalds 57bb559574 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits)
  ceph: fix cap flush race reentrancy
  libceph: subscribe to osdmap when cluster is full
  libceph: handle new osdmap down/state change encoding
  rbd: handle online resize of underlying rbd image
  ceph: avoid inode lookup on nfs fh reconnect
  ceph: use LOOKUPINO to make unconnected nfs fh more reliable
  rbd: use snprintf for disk->disk_name
  rbd: cleanup: make kfree match kmalloc
  rbd: warn on update_snaps failure on notify
  ceph: check return value for start_request in writepages
  ceph: remove useless check
  libceph: add missing breaks in addr_set_port
  libceph: fix TAG_WAIT case
  ceph: fix broken comparison in readdir loop
  libceph: fix osdmap timestamp assignment
  ceph: fix rare potential cap leak
  libceph: use snprintf for unknown addrs
  libceph: use snprintf for formatting object name
  ceph: use snprintf for dirstat content
  libceph: fix uninitialized value when no get_authorizer method is set
  ...
2011-05-25 11:46:31 -07:00
Linus Torvalds 929cfdd5d3 Merge branch 'for-2.6.40/drivers' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.40/drivers' of git://git.kernel.dk/linux-2.6-block: (110 commits)
  loop: handle on-demand devices correctly
  loop: limit 'max_part' module param to DISK_MAX_PARTS
  drbd: fix warning
  drbd: fix warning
  drbd: Fix spelling
  drbd: fix schedule in atomic
  drbd: Take a more conservative approach when deciding max_bio_size
  drbd: Fixed state transitions after async outdate-peer-handler returned
  drbd: Disallow the peer_disk_state to be D_OUTDATED while connected
  drbd: Fix for the connection problems on high latency links
  drbd: fix potential activity log refcount imbalance in error path
  drbd: Only downgrade the disk state in case of disk failures
  drbd: fix disconnect/reconnect loop, if ping-timeout == ping-int
  drbd: fix potential distributed deadlock
  lru_cache.h: fix comments referring to ts_ instead of lc_
  drbd: Fix for application IO with the on-io-error=pass-on policy
  xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions.
  xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override.
  xen/blkback: don't fail empty barrier requests
  xen/blkback: fix xenbus_transaction_start() hang caused by double xenbus_transaction_end()
  ...
2011-05-25 09:15:35 -07:00
Linus Torvalds 798ce8f1cc Merge branch 'for-2.6.40/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.40/core' of git://git.kernel.dk/linux-2.6-block: (40 commits)
  cfq-iosched: free cic_index if cfqd allocation fails
  cfq-iosched: remove unused 'group_changed' in cfq_service_tree_add()
  cfq-iosched: reduce bit operations in cfq_choose_req()
  cfq-iosched: algebraic simplification in cfq_prio_to_maxrq()
  blk-cgroup: Initialize ioc->cgroup_changed at ioc creation time
  block: move bd_set_size() above rescan_partitions() in __blkdev_get()
  block: call elv_bio_merged() when merged
  cfq-iosched: Make IO merge related stats per cpu
  cfq-iosched: Fix a memory leak of per cpu stats for root group
  backing-dev: Kill set but not used var in  bdi_debug_stats_show()
  block: get rid of on-stack plugging debug checks
  blk-throttle: Make no throttling rule group processing lockless
  blk-cgroup: Make cgroup stat reset path blkg->lock free for dispatch stats
  blk-cgroup: Make 64bit per cpu stats safe on 32bit arch
  blk-throttle: Make dispatch stats per cpu
  blk-throttle: Free up a group only after one rcu grace period
  blk-throttle: Use helper function to add root throtl group to lists
  blk-throttle: Introduce a helper function to fill in device details
  blk-throttle: Dynamically allocate root group
  blk-cgroup: Allow sleeping while dynamically allocating a group
  ...
2011-05-25 09:14:07 -07:00
Sage Weil 9db4b3e327 rbd: handle online resize of underlying rbd image
If we get a notification that the image header has changed, check for
a change in the image size.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:08 -07:00
Sage Weil aedfec59ee rbd: use snprintf for disk->disk_name
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:03 -07:00
Sage Weil 916d4d6727 rbd: cleanup: make kfree match kmalloc
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:01 -07:00
Namhyung Kim a1c15c59fe loop: handle on-demand devices correctly
When finding or allocating a loop device, loop_probe() did not take
partition numbers into account so that it can result to a different
device. Consider following example:

$ sudo modprobe loop max_part=15
$ ls -l /dev/loop*
brw-rw---- 1 root disk 7,   0 2011-05-24 22:16 /dev/loop0
brw-rw---- 1 root disk 7,  16 2011-05-24 22:16 /dev/loop1
brw-rw---- 1 root disk 7,  32 2011-05-24 22:16 /dev/loop2
brw-rw---- 1 root disk 7,  48 2011-05-24 22:16 /dev/loop3
brw-rw---- 1 root disk 7,  64 2011-05-24 22:16 /dev/loop4
brw-rw---- 1 root disk 7,  80 2011-05-24 22:16 /dev/loop5
brw-rw---- 1 root disk 7,  96 2011-05-24 22:16 /dev/loop6
brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7
$ sudo mknod /dev/loop8 b 7 128
$ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img
$ sudo losetup -a
/dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img)
$ ls -l /dev/loop*
brw-rw---- 1 root disk 7,    0 2011-05-24 22:16 /dev/loop0
brw-rw---- 1 root disk 7,   16 2011-05-24 22:16 /dev/loop1
brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128
brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1
brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2
brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3
brw-rw---- 1 root disk 7,   32 2011-05-24 22:16 /dev/loop2
brw-rw---- 1 root disk 7,   48 2011-05-24 22:16 /dev/loop3
brw-rw---- 1 root disk 7,   64 2011-05-24 22:16 /dev/loop4
brw-rw---- 1 root disk 7,   80 2011-05-24 22:16 /dev/loop5
brw-rw---- 1 root disk 7,   96 2011-05-24 22:16 /dev/loop6
brw-rw---- 1 root disk 7,  112 2011-05-24 22:16 /dev/loop7
brw-r--r-- 1 root root 7,  128 2011-05-24 22:17 /dev/loop8

After this patch, /dev/loop8 - instead of /dev/loop128 - was
accessed correctly.

In addition, 'range' passed to blk_register_region() should
include all range of dev_t that LOOP_MAJOR can address. It does
not need to be limited by partition numbers unless 'max_loop'
param was specified.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 16:48:55 +02:00
Namhyung Kim 78f4bb367f loop: limit 'max_part' module param to DISK_MAX_PARTS
The 'max_part' parameter controls the number of maximum partition
a loop block device can have. However if a user specifies very
large value it would exceed the limitation of device minor number
and can cause a kernel panic (or, at least, produce invalid
device nodes in some cases).

On my desktop system, following command kills the kernel. On qemu,
it triggers similar oops but the kernel was alive:

$ sudo modprobe loop max_part0000
 ------------[ cut here ]------------
 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65!
 invalid opcode: 0000 [#1] SMP
 last sysfs file:
 CPU 0
 Modules linked in: loop(+)

 Pid: 43, comm: insmod Tainted: G        W   2.6.39-qemu+ #155 Bochs Bochs
 RIP: 0010:[<ffffffff8113ce61>]  [<ffffffff8113ce61>] internal_create_group=
+0x2a/0x170
 RSP: 0018:ffff880007b3fde8  EFLAGS: 00000246
 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4
 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878
 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000
 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50
 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800
 FS:  0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000=
00
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c=
0)
 Stack:
  ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b
  0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868
  0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8
 Call Trace:
  [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af
  [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e
  [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12
  [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16
  [<ffffffff8116a090>] blk_register_queue+0x47/0xf7
  [<ffffffff8116f527>] add_disk+0xdf/0x290
  [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop]
  [<ffffffffa0006000>] ? 0xffffffffa0005fff
  [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e
  [<ffffffff81096804>] sys_init_module+0x9c/0x1e0
  [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b
 Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb=
 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe =
48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49
 RIP  [<ffffffff8113ce61>] internal_create_group+0x2a/0x170
  RSP <ffff880007b3fde8>
 ---[ end trace a123eb592043acad ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 16:48:54 +02:00
Andrew Morton 0ddf72be4e drbd: fix warning
In file included from drivers/block/drbd/drbd_main.c:54:                        drivers/block/drbd/drbd_int.h:1190: warning: parameter has incomplete type

Forward declarations of enums do not work.

Fix it unpleasantly by moving the prototype.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Lars Ellenberg <drbd-dev@lists.linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-05-24 10:38:33 +02:00