Commit Graph

693 Commits

Author SHA1 Message Date
Eric Anholt 63ee41d794 drm/i915, intel_ips: When i915 loads after IPS, make IPS relink to i915.
The IPS driver is designed to be able to run detached from i915 and
just not enable GPU turbo in that case, in order to avoid module
dependencies between the two drivers.  This means that we don't know
what the load order between the two is going to be, and we had
previously only supported IPS after (optionally) i915, but not i915
after IPS.  If the wrong order was chosen, you'd get no GPU turbo, and
something like half the possible graphics performance.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2010-12-23 09:51:36 +00:00
Thadeu Lima de Souza Cascardo 8b14d7b22c wmi: use memcmp instead of strncmp to compare GUIDs
While looking for the duplicates in /sys/class/wmi/, I couldn't find
them. The code that looks for duplicates uses strncmp in a binary GUID,
which may contain zero bytes. The right function is memcmp, which is
also used in another section of wmi code.

It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of
39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth
printed, they were found as equal by strncmp.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
2010-12-06 17:19:13 -05:00
Zeng Zhaoming 53c96dfdd0 ACPI, hp-wmi: Fix memory leak in acpi query
Free acpi return memory after query.

Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:07:10 -05:00
Anisse Astier a80e1cd701 msi-wmi: fix semantically incorrect use of keycode instead of scancode
I didn't know the difference between the two when I wrote this code in
commit c30116c6f0.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:28 -05:00
Anisse Astier 92f61cbc61 msi-wmi: Add mute key support
Add new MUTE key seen on Medion Akoya AIO PC P4010D using MSI motherboard
(Product Name: MS-7621)

Reported-and-tested-by: Mark Huijgen <mark.sf.net@huijgen.tk>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:22 -05:00
Corentin Chary ba1ff5be52 asus-laptop: add wimax and wwan support
Asus UL30A has a 3G chip, but the radio is disabled by default.
The DSDT also reference a WIMAX device, which is not present on this model.

This patch adds two new files: wwan and wimax to control WWAN and
WIMAX devices. It does not use rfkill, because like WLED and BLED,
we don't know yet that the two ACPI functions will always control the
radio, they may control only the leds on some hardware.

We may add rfkill switchs later.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:15 -05:00
Dmitry Torokhov 67fa38ec09 eeepc-wmi: fix compiler warning
This fixes the following:

  CC [M]  drivers/platform/x86/eeepc-wmi.o
drivers/platform/x86/eeepc-wmi.c:322: warning: initialization from incompatible pointer type

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:09 -05:00
Vernon Mauery 1d37db77c1 ibm_rtl: _RTL_ is not available in UEFI mode
Some of the IBM servers that are supported by ibm_rtl
can run in both Legacy mode (BIOS) and in UEFI mode.
When running in UEFI mode, it is possible that the
EBDA table exists but cannot be mapped and reports
errors.  We need to make sure that by default we don't
try to probe the machines if they are running in UEFI
mode.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:03 -05:00
Vernon Mauery a2262260f9 ibm_rtl: Loosen the DMI criteria to all IBM machines
Allow all IBM machines to pass the DMI check so that we
don't have to add them one by one to the driver.  Any IBM
machine that has the _RTL_ table in the EBDA will work.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:57 -05:00
Julia Lawall d41014b92d drivers/platform/x86/thinkpad_acpi.c: delete double assignment
Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:51 -05:00
Jon Dowland a49010f53b toshiba_acpi.c: Add key_entry for a lone FN keypress
A lone FN key press on a Toshiba Portégé R700 without another key in
conjunction results in an ACPI event and a spurious error message on
the console.

Add a key entry to map this event to a KEY_FN keypress. This prevents
the console message.

Signed-off-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:37 -05:00
Randy Dunlap c72b844ed2 ibm_rtl: fix printk format warning
Fix printk format warning:

drivers/platform/x86/ibm_rtl.c:305:warning: format '%#llx' expects type 'long long unsigned int', but argument 2 has type 'phys_addr_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Vernon Mauery <vernux@us.ibm.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:31 -05:00
Zimny Lech 61d8e11e51 Remove duplicate includes from many files
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:18 -07:00
Linus Torvalds fbaab1dc19 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits)
  eeepc-wmi: Add cpufv sysfs interface
  eeepc-wmi: add additional hotkeys
  panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata
  panasonic-laptop: Handle errors properly if they happen
  intel_pmic_gpio: fix off-by-one value range checking
  IBM Real-Time "SMI Free" mode driver -v7
  Add OLPC XO-1 rfkill driver
  Move hdaps driver to platform/x86
  ideapad-laptop: Fix Makefile
  intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register
  ideapad: Add param: no_bt_rfkill
  ideapad: Change the driver name to ideapad-laptop
  ideapad: rewrite the sw rfkill set
  ideapad: rewrite the hw rfkill notify
  ideapad: use EC command to control camera
  ideapad: use return value of _CFG to tell if device exist or not
  ideapad: make sure we bind on the correct device
  ideapad: check VPC bit before sync rfkill hw status
  ideapad: add ACPI helpers
  dell-laptop: Add debugfs support
  ...
2010-10-25 08:28:13 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Chris Bagwell 7f80d734b3 eeepc-wmi: Add cpufv sysfs interface
eeepc-laptop provides a sysfs interface to read and control what it
calls cpufv.  When WMI is enabled, the ACPI interface changes slightly
and becames a write-only control with 3 valid values.

Expose cpufv again to allow for user space utils that can extended battery
life noticably and come a little closer to parity with eeepc-laptop.

Write-only is OK for most user space apps because read status was
mostly used to prevent unneeded mode changes.  Since this same check
to ignore changes to same mode also exists in the DSDT then it was
wasted ACPI call.

acpi_osi="!Windows 2009" can be used for get back eeepc-laptop's
read support of cpufv for debugging things such as behaviour
during resume.

This patch was tested with EEE PC 1005PE by monitoring powertop output while
writing values of "0", "1", and "2" and by reviewing the decompiled DSDT of
an 1201NL and comparing it to 1005PE's DSDT.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:53 -04:00
Chris Bagwell eda1748418 eeepc-wmi: add additional hotkeys
Added 4 hotkeys using same keymap values as eeepc-latop.
These are mousepad toggle, resolution change, screen off,
and task manager.  These were tested on 1005PE and are the
Fn-F3, F4, F7, and F9, respectively.

Also, added a new hot key for power toggles (Fn-Space on 1005PE)
and is meant to drive cpufv interface from userspace.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:51 -04:00
Jean Delvare e253fb944d panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata
Function acpi_pcc_retrieve_biosdata is always called with parameters
(pcc, pcc->sinf), so we can drop the second parameter. It was
dangerous to pass the sinf array separately anyway, as its length is
checked as pcc->num_sifr, which pretty much assumed it was pcc->sinf
(or at least had the same size.)

This change makes the code slightly more compact and thus marginally
faster.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:50 -04:00
Jean Delvare aa13857f13 panasonic-laptop: Handle errors properly if they happen
acpi_pcc_retrieve_biosdata() returns success instead of error if
HKEY.SINF is invalid. Fix this.

Furthermore, if acpi_pcc_retrieve_biosdata() returns an error
during device addition, initialization is properly reverted but value
0 is returned, which means success. This would cause a crash when
later using or removing the device, so fix this too.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:49 -04:00
Axel Lin 4119617919 intel_pmic_gpio: fix off-by-one value range checking
In pmic_irq_type(), we use gpio as array index for trigger,
thus the valid value range for gpio should be 0 .. NUM_GPIO - 1.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:47 -04:00
Vernon Mauery 35f0ce032b IBM Real-Time "SMI Free" mode driver -v7
After a period of RFC for this driver, I think it is ready
for inclusion in the platform-driver-x86 tree, hopefully to
be staged in the next merge window into Linus's tree.

--Vernon

------------------------------------------------------------

IBM Real-Time "SMI Free" mode driver

This driver supports the Real-Time Linux (RTL) BIOS feature.
The RTL feature allows non-fatal System Management Interrupts
(SMIs) to be disabled on supported IBM platforms and is
intended to be coupled with a user-space daemon to monitor
the hardware in a way that can be prioritized and scheduled
to better suit the requirements for the system.

The Device is presented as a special "_RTL_" table to the OS
in the Extended BIOS Data Area.  There is a simple protocol
for entering and exiting the mode at runtime.  This driver
creates a simple sysfs interface to allow a simple entry and
exit from RTL mode in the UFI/BIOS.

Since the driver is specific to IBM SystemX hardware (x86-
based servers) it only builds on x86 builds.  To reduce the
risk of loading on the wrong hardware, the module uses DMI
information and checks a list of servers that are known to
work.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:46 -04:00
Daniel Drake 260586d2b4 Add OLPC XO-1 rfkill driver
Add a software rfkill switch for the WLAN interface in the OLPC XO-1
laptop. It uses the OLPC embedded controller to cut/restore power to
the Marvell WLAN chip on the motherboard.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:44 -04:00
Jean Delvare bd9fc3a723 Move hdaps driver to platform/x86
The hdaps driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/platform/x86 seems much more
appropriate, as the driver is only useful on x86 laptops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Frank Seidel <frank@f-seidel.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:43 -04:00
Matthew Garrett 75b2d09a29 ideapad-laptop: Fix Makefile
The makefile didn't get updated when the driver changed name, which broke
the build.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Alek Du ffcfff3a8d intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register
The intel_scu_ipc_update_register 2nd paramter should the bits and 3rd
paramter should be the mask.

This typo was introduced during IPC function changing...

Reported-by: Ryan Zhou <ryan.zhou@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Ike Panhc bfa97b7dab ideapad: Add param: no_bt_rfkill
Add new module parameter that force module not to register bluetooth rfkill.

There is report that saying using this bluetooth rfkill to enable/disable
bluetooth will let bluetooth device initial failed when enable on Lenovo
ideapad S12. Fortunately there is another rfkill registered by bluetooth
driver for S12 and user can shutdown the bluetooth by either bluetooth driver
or HW RF switch.

For dual OS user, it may have some trouble that using Linux after turning off
bluetooth with another OS if we do not register bluetooth rfkill at all. So
we will force bluetooth enable when no_bt_rfkill=1.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Tested-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Ike Panhc 57ac3b051c ideapad: Change the driver name to ideapad-laptop
Since the platform drivers doing more for laptops than just using specific
ACPI device. It will be good to change the name from *_acpi to *-laptop.

Reference: http://lkml.org/lkml/2010/8/14/154

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Ike Panhc fa08359ee2 ideapad: rewrite the sw rfkill set
Control power of rf modules by ec commands

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc 2b7266bd49 ideapad: rewrite the hw rfkill notify
1. Read hw rfkill status by ec command
2. Not to touch sw status of each rfkill when hw rfkill notify
3. Initial rfkill status when module loaded

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc 26c81d5c9a ideapad: use EC command to control camera
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc dfa7f6fe0a ideapad: use return value of _CFG to tell if device exist or not
There are several bits of the return value of _CFG shows if RF/Camera devices
exist or not.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc 6f8371c05e ideapad: make sure we bind on the correct device
By reading from method _CFG to make sure we bind on the correct VPC2004 device.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Ike Panhc 8e7d354370 ideapad: check VPC bit before sync rfkill hw status
Check VPC bit to make sure the HW rfkill is touched.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Ike Panhc 6a09f21dd1 ideapad: add ACPI helpers
There are two methods under VPC2004 which is used to access VDAT/VCMD of EC
register. Add helpers for read and write these two registers.

And add read_method_int for reading the return value from ACPI methods which
requires no parameter.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Keng-Yu Lin 037accfa14 dell-laptop: Add debugfs support
Export the status of RF killswitch through debugfs.

The killswitch status is obtained by the SMI to BIOS. Exporting this status
through debugfs can help identify the issue with the misbehaving firmware.

Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Dmitry Torokhov c64eefd48c WMI: embed struct device directly into wmi_block
Instead of creating wmi_blocks and then register corresponding devices
on a separate pass do it all in one shot, since lifetime rules for both
objects are the same. This also takes care of leaking devices when
device_create fails for one of them.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:48 -04:00
Dmitry Torokhov 614ef43222 WMI: make use of class device's attributres
Instead of adding modalias attribute manually set it up as class's
device attribute so driver core will create and remove it for us.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:48 -04:00
Dmitry Torokhov 8e07514db8 WMI: use pr_err() and friends
This makes source more concise and easier to read.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:48 -04:00
Dmitry Torokhov 762e1a2ff6 WMI: use separate list head for storing wmi blocks
Do not abuse wmi_block structure to hold the head of list
of blocks, use separate list_head for that.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:47 -04:00
Dmitry Torokhov 378306628e WMI: simplify handling of returned WMI blocks in parse_wdg()
There is no reason why we allocate memory and copy data into an
intermediate buffer, it is not like we are working with data coming
from userspace.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:47 -04:00
Dmitry Torokhov 3d2c63eb5e WMI: fix potential NULL pointer dereference
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:47 -04:00
Dmitry Torokhov 64ed0ab8d0 WMI: do not leak memory in parse_wdg()
If we _WDG returned object that is not buffer we were forgetting
to free memory allocated for that object.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:47 -04:00
Dmitry Torokhov 4e4304d749 WMI: fix wmi_gtoa() to actully terminate the string
Courtesy of sparse...

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:46 -04:00
Dmitry Torokhov 2d5ab5551f WMI: free wmi blocks when parse_wdg() fails
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:46 -04:00
Dmitry Torokhov 5212cd678a WMI: remove EC region handler when _WDG parsing fails
Driver initialization was forgetting to remove EC address space handler
in cases when parse_wdg() method failed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:46 -04:00
Dmitry Torokhov ac9b1e5b63 asus-laptop: use attribute group to manage attributes
Instead of registering (and removing) every attribute individually
switch to using sysfs attribute group. This makes sure that we
properly unwind and do not try to remove non-existent attributes which
may not be safe to do in the future.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:46 -04:00
Alan Cox 209009b2cb scu_ipc: Fix warning caused by include changes
We need to include the SFI headers. This is fine as the SCU is only
relevant to x86 platforms with SFI.

Fixes the -next warning report.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:45 -04:00
Andy Shevchenko 392bd8b584 platform: x86: throw away custom methods
In 2.6.35 the hex_to_bin() was introduced.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:45 -04:00
Randy Dunlap 91e5d284a7 acpi_toshiba: fix kconfig error
Fix kconfig recursive dependency error in ACPI_TOSHIBA:
it uses both select and depends on for BACKLIGHT_CLASS_DEVICE.

drivers/video/backlight/Kconfig:117:error: recursive dependency detected!
drivers/video/backlight/Kconfig:117:    symbol BACKLIGHT_CLASS_DEVICE is selected by ACPI_TOSHIBA
drivers/platform/x86/Kconfig:490:       symbol ACPI_TOSHIBA depends on LEDS_CLASS
drivers/leds/Kconfig:12:        symbol LEDS_CLASS is selected by BACKLIGHT_ADP8860
drivers/video/backlight/Kconfig:285:    symbol BACKLIGHT_ADP8860 depends on BACKLIGHT_CLASS_DEVICE

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:45 -04:00
Pascal de Bruijn af9902e130 Don't show error if Acer WMI is not found
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:44 -04:00