Commit Graph

264 Commits

Author SHA1 Message Date
Sachin Prabhu c11f1df500 cifs: Wait for writebacks to complete before attempting write.
Problem reported in Red Hat bz 1040329 for strict writes where we cache
only when we hold oplock and write direct to the server when we don't.

When we receive an oplock break, we first change the oplock value for
the inode in cifsInodeInfo->oplock to indicate that we no longer hold
the oplock before we enqueue a task to flush changes to the backing
device. Once we have completed flushing the changes, we return the
oplock to the server.

There are 2 ways here where we can have data corruption
1) While we flush changes to the backing device as part of the oplock
break, we can have processes write to the file. These writes check for
the oplock, find none and attempt to write directly to the server.
These direct writes made while we are flushing from cache could be
overwritten by data being flushed from the cache causing data
corruption.
2) While a thread runs in cifs_strict_writev, the machine could receive
and process an oplock break after the thread has checked the oplock and
found that it allows us to cache and before we have made changes to the
cache. In that case, we end up with a dirty page in cache when we
shouldn't have any. This will be flushed later and will overwrite all
subsequent writes to the part of the file represented by this page.

Before making any writes to the server, we need to confirm that we are
not in the process of flushing data to the server and if we are, we
should wait until the process is complete before we attempt the write.
We should also wait for existing writes to complete before we process
an oplock break request which changes oplock values.

We add a version specific  downgrade_oplock() operation to allow for
differences in the oplock values set for the different smb versions.

Cc: stable@vger.kernel.org
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-16 13:51:46 -05:00
Steve French 42eacf9e57 [CIFS] Fix cifsacl mounts over smb2 to not call cifs
When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option,
it was trying to get the mode by querying the acl over the cifs
rather than smb2 protocol.  This patch makes that protocol
independent and makes cifsacl smb2 mounts return a more intuitive
operation not supported error (until we add a worker function
for smb2_get_acl).

Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr
which would unconditionally call cifs_get_acl and cifs_set_acl (even when
mounted smb2). I made those protocol independent last week (new protocol
version operations "get_acl" and "set_acl" but did not add an
smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP
which at least is better than sending cifs requests on smb2 mount)

The previous patches did not fix the one remaining case though ie
mounting with "cifsacl" when getting mode from acl would unconditionally
end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol
independent but to make that protocol independent had to make sure that the callers
were passing the protocol independent handle structure (cifs_fid) instead
of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid)

Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead
of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl)
to enable this.

Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-10 14:08:16 -06:00
Steve French 4a5c80d7b5 [CIFS] clean up page array when uncached write send fails
In the event that a send fails in an uncached write, or we end up
needing to reissue it (-EAGAIN case), we'll kfree the wdata but
the pages currently leak.

Fix this by adding a new kref release routine for uncached writedata
that releases the pages, and have the uncached codepaths use that.

[original patch by Jeff modified to fix minor formatting problems]

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-07 20:47:00 -06:00
Pavel Shilovsky d81b8a40e2 CIFS: Cleanup cifs open codepath
Rename CIFSSMBOpen to CIFS_open and make it take
cifs_open_parms structure as a parm.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 09:52:13 -06:00
Pavel Shilovsky 9bf4fa01f9 CIFS: Cleanup CIFSSMBOpen
Remove indentation, fix comment style, rename camel case
variables in preparation to make it work with cifs_open_parms
structure as a parm.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 09:52:02 -06:00
Sachin Prabhu cbb0aba6ff cifs: Add create MFSymlinks to protocol ops struct
Add a new protocol ops function create_mf_symlink and have
create_mf_symlink() use it.

This patchset moves the MFSymlink operations completely to the
ops structure so that we only use the right protocol versions when
querying or creating MFSymlinks.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 00:14:00 -06:00
Sachin Prabhu cb084b1a9b cifs: Rename MF symlink function names
Clean up camel case in functionnames.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 00:13:54 -06:00
Sachin Prabhu b5be1a1c4c cifs: Rename and cleanup open_query_close_cifs_symlink()
Rename open_query_close_cifs_symlink to cifs_query_mf_symlink() to make
the name more consistent with other protocol version specific functions.

We also pass tcon as an argument to the function. This is already
available in the calling functions and we can avoid having to make an
unnecessary lookup.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 00:13:51 -06:00
Sachin Prabhu 750b8de6c4 cifs: We do not drop reference to tlink in CIFSCheckMFSymlink()
When we obtain tcon from cifs_sb, we use cifs_sb_tlink() to first obtain
tlink which also grabs a reference to it. We do not drop this reference
to tlink once we are done with the call.

The patch fixes this issue by instead passing tcon as a parameter and
avoids having to obtain a reference to the tlink. A lookup for the tcon
is already made in the calling functions and this way we avoid having to
re-run the lookup. This is also consistent with the argument list for
other similar calls for M-F symlinks.

We should also return an ENOSYS when we do not find a protocol specific
function to lookup the MF Symlink data.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-12-27 15:14:44 -06:00
Steve French c7f508a99b Allow setting per-file compression via CIFS protocol
An earlier patch allowed setting the per-file compression flag

"chattr +c filename"

on an smb2 or smb3 mount, and also allowed lsattr to return
whether a file on a cifs, or smb2/smb3 mount was compressed.

This patch extends the ability to set the per-file
compression flag to the cifs protocol, which uses a somewhat
different IOCTL mechanism than SMB2, although the payload
(the flags stored in the compression_state) are the same.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02 12:52:44 -05:00
Shirish Pargaonkar 32811d242f cifs: Start using per session key for smb2/3 for signature generation
Switch smb2 code to use per session session key and smb3 code to
    use per session signing key instead of per connection key to
    generate signatures.

    For that, we need to find a session to fetch the session key to
    generate signature to match for every request and response packet.

    We also forgo checking signature for a session setup response
    from the server.

Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:47:50 -05:00
Pavel Shilovsky d244bf2dfb CIFS: Implement follow_link for nounix CIFS mounts
by using a query reparse ioctl request.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:27:41 -05:00
Steve French 1b244081af Do not attempt to do cifs operations reading symlinks with SMB2
When use of symlinks is enabled (mounting with mfsymlinks option) to
non-Samba servers, we always tried to use cifs, even when we
were mounted with SMB2 or SMB3, which causes the server to drop the
network connection.

This patch separates out the protocol specific operations for cifs from
the code which recognizes symlinks, and fixes the problem where
with SMB2 mounts we attempt cifs operations to open and read
symlinks.  The next patch will add support for SMB2 for opening
and reading symlinks.  Additional followon patches will address
the similar problem creating symlinks.

Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-30 23:54:45 -05:00
Steve French 95dc8dd14e Limit allocation of crypto mechanisms to dialect which requires
Updated patch to try to prevent allocation of cifs, smb2 or smb3 crypto
secmech structures unless needed.  Currently cifs allocates all crypto
mechanisms when the first session is established (4 functions and
4 contexts), rather than only allocating these when needed (smb3 needs
two, the rest of the dialects only need one).

Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-04 14:38:08 -05:00
Steve French e65a5cb417 [CIFS] Fix build warning
Fix build warning in Shirish's recent SMB3 signing patch
which occurs when SMB2 support is disabled in Kconfig.

fs/built-in.o: In function `cifs_setup_session':
>> (.text+0xa1767): undefined reference to `generate_smb3signingkey'

Pointed out by: automated 0-DAY kernel build testing backend
Intel Open Source Technology Center

CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-27 01:06:50 -05:00
Steve French 429b46f4fd [CIFS] SMB3 Signing enablement
SMB3 uses a much faster method of signing (which is also better in other ways),
AES-CMAC.  With the kernel now supporting AES-CMAC since last release, we
are overdue to allow SMB3 signing (today only CIFS and SMB2 and SMB2.1,
but not SMB3 and SMB3.1 can sign) - and we need this also for checking
secure negotation and also per-share encryption (two other new SMB3 features
which we need to implement).

This patch needs some work in a few areas - for example we need to
move signing for SMB2/SMB3 from per-socket to per-user (we may be able to
use the "nosharesock" mount option in the interim for the multiuser case),
and Shirish found a bug in the earlier authentication overhaul
(setting signing flags properly) - but those can be done in followon
patches.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-26 23:45:05 -05:00
Jeff Layton 3f618223dc move sectype to the cifs_ses instead of TCP_Server_Info
Now that we track what sort of NEGOTIATE response was received, stop
mandating that every session on a socket use the same type of auth.

Push that decision out into the session setup code, and make the sectype
a per-session property. This should allow us to mix multiple sectypes on
a socket as long as they are compatible with the NEGOTIATE response.

With this too, we can now eliminate the ses->secFlg field since that
info is redundant and harder to work with than a securityEnum.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:44 -05:00
Jeff Layton 38d77c50b4 cifs: track the enablement of signing in the TCP_Server_Info
Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.

Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.

This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:43 -05:00
Jeff Layton 9ddec56131 cifs: move handling of signed connections into separate function
Move the sanity checks for signed connections into a separate function.
SMB2's was a cut-and-paste job from CIFS code, so we can make them use
the same function.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:41 -05:00
Joe Perches f96637be08 [CIFS] cifs: Rename cERROR and cFYI to cifs_dbg
It's not obvious from reading the macro names that these macros
are for debugging.  Convert the names to a single more typical
kernel style cifs_dbg macro.

	cERROR(1, ...)   -> cifs_dbg(VFS, ...)
	cFYI(1, ...)     -> cifs_dbg(FYI, ...)
	cFYI(DBG2, ...)  -> cifs_dbg(NOISY, ...)

Move the terminating format newline from the macro to the call site.

Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.

Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)

$ size fs/cifs/cifs.ko*
   text    data     bss     dec     hex filename
 265245	   2525	    132	 267902	  4167e	fs/cifs/cifs.ko.new
 268359    2525     132  271016   422a8 fs/cifs/cifs.ko.old

Other miscellaneous changes around these conversions:

o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
  from the macros to be more kernel style like.  A few formats
  previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
  added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:17:23 -05:00
Eric W. Biederman 49418b2c28 cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate
the value should not be changed.

In cifs_fill_unix_set_info convert from kuids and kgids into uids and
gids that will fit in FILE_UNIX_BASIC_INFO.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:49 -08:00
Eric W. Biederman dbfb98af18 cifs: Convert from a kuid before printing current_fsuid
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:48 -08:00
Eric W. Biederman 8abf2775dd cifs: Use kuids and kgids SID to uid/gid mapping
Update id_mode_to_cifs_acl to take a kuid_t and a kgid_t.

Replace NO_CHANGE_32 with INVALID_UID and INVALID_GID, and tests for
NO_CHANGE_32 with uid_valid and gid_valid.

Carefully unpack the value returned from request_key.  memcpy the
value into the expected type.  The convert the uid/gid into a
kuid/kgid.  And then only if the result is a valid kuid or kgid update
fuid/fgid.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:47 -08:00
Jeff Layton faa65f07d2 cifs: simplify id_to_sid and sid_to_id mapping code
The cifs.idmap handling code currently causes the kernel to cache the
data from userspace twice. It first looks in a rbtree to see if there is
a matching entry for the given id. If there isn't then it calls
request_key which then checks its cache and then calls out to userland
if it doesn't have one. If the userland program establishes a mapping
and downcalls with that info, it then gets cached in the keyring and in
this rbtree.

Aside from the double memory usage and the performance penalty in doing
all of these extra copies, there are some nasty bugs in here too. The
code declares four rbtrees and spinlocks to protect them, but only seems
to use two of them. The upshot is that the same tree is used to hold
(eg) uid:sid and sid:uid mappings. The comparitors aren't equipped to
deal with that.

I think we'd be best off to remove a layer of caching in this code. If
this was originally done for performance reasons, then that really seems
like a premature optimization.

This patch does that -- it removes the rbtrees and the locks that
protect them and simply has the code do a request_key call on each call
into sid_to_id and id_to_sid. This greatly simplifies this code and
should roughly halve the memory utilization from using the idmapping
code.

Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-08 22:04:25 -06:00
Pavel Shilovsky 081c0414dc CIFS: Do not permit write to a range mandatory locked with a read lock
We don't need to permit a write to the area locked with a read lock
by any process including the process that issues the write.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-07 12:40:50 -06:00
Jeff Layton b979aaa177 cifs: get rid of smb_vol->UNCip and smb_vol->port
Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05 13:27:30 -06:00
Steve French 6d3ea7e497 CIFS: Make use of common cifs_build_path_to_root for CIFS and SMB2
because the is no difference here. This also adds support of prefixpath
mount option for SMB2.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05 13:27:28 -06:00
Shirish Pargaonkar c052e2b423 cifs: obtain file access during backup intent lookup (resend)
Rebased and resending the patch.

Path based queries can fail for lack of access, especially during lookup
during open.
open itself would actually succeed becasue of back up intent bit
but queries (either path or file handle based) do not have a means to
specifiy backup intent bit.
So query the file info during lookup using
 trans2 / findfirst / file_id_full_dir_info
to obtain file info as well as file_id/inode value.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-28 15:32:28 -05:00
Pavel Shilovsky 233839b1df CIFS: Fix fast lease break after open problem
Now we walk though cifsFileInfo's list for every incoming lease
break and look for an equivalent there. That approach misses lease
breaks that come just after an open response - we don't have time
to populate new cifsFileInfo structure to the list. Fix this by
adding new list of pending opens and look for a lease there if we
didn't find it in the list of cifsFileInfo structures.

Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24 21:46:33 -05:00
Pavel Shilovsky 579f905323 CIFS: Check for mandatory brlocks on read/write
Currently CIFS code accept read/write ops on mandatory locked area
when two processes use the same file descriptor - it's wrong.
Fix this by serializing io and brlock operations on the inode.

Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24 21:46:33 -05:00
Pavel Shilovsky f7ba7fe685 CIFS: Add brlock support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
2012-09-24 21:46:33 -05:00
Pavel Shilovsky d39a4f710b CIFS: Move brlock code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
2012-09-24 21:46:32 -05:00
Jeff Layton fec344e3f3 cifs: change cifs_call_async to use smb_rqst structs
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.

Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:31 -05:00
Jeff Layton fb308a6f22 cifs: teach signing routines how to deal with arrays of pages in a smb_rqst
Use the smb_send_rqst helper function to kmap each page in the array
and update the hash for that chunk.

Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:31 -05:00
Jeff Layton bf5ea0e2f2 cifs: change signing routines to deal with smb_rqst structs
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.

Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.

Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:30 -05:00
Pavel Shilovsky 92fc65a74a CIFS: Move readdir code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:29 -05:00
Pavel Shilovsky d143341815 CIFS: Move set_file_size to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:29 -05:00
Steve French d6e906f1b5 CIFS: Move hardlink to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:29 -05:00
Pavel Shilovsky 8ceb984379 CIFS: Move rename to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky 3c1bf7e48e CIFS: Enable signing in SMB2
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.

Signature field in SMB2 header is 16 bytes instead of 8 bytes.

Automatically enable signing by client when requested by the server
when signing ability is available to the client.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky ba9ad7257a CIFS: Move writepage to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky 3331914125 CIFS: Add SMB2 support for cifs_iovec_write
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky 09a4707e76 CIFS: Add SMB2 support for cifs_iovec_read
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:27 -05:00
Pavel Shilovsky 4ad6504453 CIFS: Move guery file info code to ops struct
and make cifs_get_file_info(_unix) calls static.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:26 -05:00
Pavel Shilovsky fb1214e48f CIFS: Move open code to ops struct
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:26 -05:00
Pavel Shilovsky ed6875e0d6 CIFS: Move unlink code to ops struct
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:26 -05:00
Pavel Shilovsky f958ca5d88 CIFS: Move rmdir code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27 15:17:47 -05:00
Pavel Shilovsky f436720e94 CIFS: Separate protocol specific part from mkdir
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27 15:17:40 -05:00
Pavel Shilovsky ff691e9694 CIFS: Simplify cifs_mkdir call
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27 15:17:16 -05:00
Pavel Shilovsky 45740847e2 CIFS: Setup async request in ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:55:12 +04:00