Commit Graph

214 Commits

Author SHA1 Message Date
Ilya Dryomov 54ea0046b6 libceph, rbd, ceph: WRITE | ONDISK -> WRITE
CEPH_OSD_FLAG_ONDISK is set in account_request().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-24 19:04:57 +01:00
Ilya Dryomov 55f2a04588 ceph: remove special ack vs commit behavior
- ask for a commit reply instead of an ack reply in
  __ceph_pool_perm_get()
- don't ask for both ack and commit replies in ceph_sync_write()
- since just only one reply is requested now, i_unsafe_writes list
  will always be empty -- kill ceph_sync_write_wait() and go back to
  a standard ->evict_inode()

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-24 19:04:57 +01:00
Jeff Layton 3dd69aabce ceph: add a new flag to indicate whether parent is locked
struct ceph_mds_request has an r_locked_dir pointer, which is set to
indicate the parent inode and that its i_rwsem is locked.  In some
critical places, we need to be able to indicate the parent inode to the
request handling code, even when its i_rwsem may not be locked.

Most of the code that operates on r_locked_dir doesn't require that the
i_rwsem be locked. We only really need it to handle manipulation of the
dcache. The rest (filling of the inode, updating dentry leases, etc.)
already has its own locking.

Add a new r_req_flags bit that indicates whether the parent is locked
when doing the request, and rename the pointer to "r_parent". For now,
all the places that set r_parent also set this flag, but that will
change in a later patch.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20 12:16:08 +01:00
Yan, Zheng c1944fedd8 ceph: avoid calling ceph_renew_caps() infinitely
__ceph_caps_mds_wanted() ignores caps from stale session. So the
return value of __ceph_caps_mds_wanted() can keep the same across
ceph_renew_caps(). This causes try_get_cap_refs() to keep calling
ceph_renew_caps(). The fix is ignore the session valid check for
the try_get_cap_refs() case. If session is stale, just let the
caps requester sleep.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2017-02-20 12:16:07 +01:00
Linus Torvalds 59331c215d A varied set of changes:
- a large rework of cephx auth code to cope with CONFIG_VMAP_STACK
   (myself).  Also fixed a deadlock caused by a bogus allocation on the
   writeback path and authorize reply verification.
 
 - a fix for long stalls during fsync (Jeff Layton).  The client now
   has a way to force the MDS log flush, leading to ~100x speedups in
   some synthetic tests.
 
 - a new [no]require_active_mds mount option (Zheng Yan).  On mount, we
   will now check whether any of the MDSes are available and bail rather
   than block if none are.  This check can be avoided by specifying the
   "no" option.
 
 - a couple of MDS cap handling fixes and a few assorted patches
   throughout.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJYVByGAAoJEEp/3jgCEfOLBqkH/A7nVf7ObSDYmLuYgg1gJ8zq
 4zDDE42S4yZwayAVpn3UjbfPuez5J44lsdXitExdfiHOdIQZDa/WqAbSqQ48HCSg
 7sG6ecRWg3G5zG0psPZnB+S5wGMvsLXmj2hvzV1lt2t0lI5bDLSlNRSnElbhilD/
 8Z7+Ni2go8DMC9o49SJU32lBW7IByKl4p4flveItgwUvGkIFNd8OT3CyPBUqonQs
 lRCeImRYU8Jghb+ifnRxWSbuDf7pZAPc9kL0vibpUUT/1bH6iHsedKp37WQKqc/w
 KDSNnKiZcz0gY/hJeLqE3ymCIKO6SU+JkMQSaYNTouLO5fQsRr8/uWQXSe6S5oc=
 =ypWx
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.10-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "A varied set of changes:

   - a large rework of cephx auth code to cope with CONFIG_VMAP_STACK
     (myself). Also fixed a deadlock caused by a bogus allocation on the
     writeback path and authorize reply verification.

   - a fix for long stalls during fsync (Jeff Layton). The client now
     has a way to force the MDS log flush, leading to ~100x speedups in
     some synthetic tests.

   - a new [no]require_active_mds mount option (Zheng Yan).

     On mount, we will now check whether any of the MDSes are available
     and bail rather than block if none are. This check can be avoided
     by specifying the "no" option.

   - a couple of MDS cap handling fixes and a few assorted patches
     throughout"

* tag 'ceph-for-4.10-rc1' of git://github.com/ceph/ceph-client: (32 commits)
  libceph: remove now unused finish_request() wrapper
  libceph: always signal completion when done
  ceph: avoid creating orphan object when checking pool permission
  ceph: properly set issue_seq for cap release
  ceph: add flags parameter to send_cap_msg
  ceph: update cap message struct version to 10
  ceph: define new argument structure for send_cap_msg
  ceph: move xattr initialzation before the encoding past the ceph_mds_caps
  ceph: fix minor typo in unsafe_request_wait
  ceph: record truncate size/seq for snap data writeback
  ceph: check availability of mds cluster on mount
  ceph: fix splice read for no Fc capability case
  ceph: try getting buffer capability for readahead/fadvise
  ceph: fix scheduler warning due to nested blocking
  ceph: fix printing wrong return variable in ceph_direct_read_write()
  crush: include mapper.h in mapper.c
  rbd: silence bogus -Wmaybe-uninitialized warning
  libceph: no need to drop con->mutex for ->get_authorizer()
  libceph: drop len argument of *verify_authorizer_reply()
  libceph: verify authorize reply on connect
  ...
2016-12-16 11:23:34 -08:00
Al Viro c4364f837c Merge branches 'work.namei', 'work.dcache' and 'work.iov_iter' into for-linus 2016-12-15 01:07:29 -05:00
Ilya Dryomov c297eb4269 libceph: always signal completion when done
r_safe_completion is currently, and has always been, signaled only if
on-disk ack was requested.  It's there for fsync and syncfs, which wait
for in-flight writes to flush - all data write requests set ONDISK.

However, the pool perm check code introduced in 4.2 sends a write
request with only ACK set.  An unfortunately timed syncfs can then hang
forever: r_safe_completion won't be signaled because only an unsafe
reply was requested.

We could patch ceph_osdc_sync() to skip !ONDISK write requests, but
that is somewhat incomplete and yet another special case.  Instead,
rename this completion to r_done_completion and always signal it when
the OSD client is done with the request, whether unsafe, safe, or
error.  This is a bit cleaner and helps with the cancellation code.

Reported-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-14 22:39:08 +01:00
Yan, Zheng 7ce469a53e ceph: fix splice read for no Fc capability case
When iov_iter type is ITER_PIPE, copy_page_to_iter() increases
the page's reference and add the page to a pipe_buffer. It also
set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm
callback in page_cache_pipe_buf_ops expects the page is from page
cache and uptodate, otherwise it return error.

For ceph_sync_read() case, pages are not from page cache. So we
can't call copy_page_to_iter() when iov_iter type is ITER_PIPE.
The fix is using iov_iter_get_pages_alloc() to allocate pages
for the pipe. (the code is similar to default_file_splice_read)

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-12 23:54:27 +01:00
Yan, Zheng 2b1ac852eb ceph: try getting buffer capability for readahead/fadvise
For readahead/fadvise cases, caller of ceph_readpages does not
hold buffer capability. Pages can be added to page cache while
there is no buffer capability. This can cause data integrity
issue.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-12 23:54:27 +01:00
Zhi Zhang a380a031cb ceph: fix printing wrong return variable in ceph_direct_read_write()
Fix printing wrong return variable for invalidate_inode_pages2_range in
ceph_direct_read_write().

Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-12 23:54:27 +01:00
Yan, Zheng 8a8d561766 ceph: use default file splice read callback
Splice read/write implementation changed recently. When using
generic_file_splice_read(), iov_iter with type == ITER_PIPE is
passed to filesystem's read_iter callback. But ceph_sync_read()
can't serve ITER_PIPE iov_iter correctly (ITER_PIPE iov_iter
expects pages from page cache).

Fixing ceph_sync_read() requires a big patch. So use default
splice read callback for now.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-11-10 20:13:04 +01:00
Al Viro ad5cb123fd ceph: switch to use of ->d_init()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-28 22:05:13 -04:00
Nikolay Borisov 0d7718f666 ceph: fix error handling in ceph_read_iter
In case __ceph_do_getattr returns an error and the retry_op in
ceph_read_iter is not READ_INLINE, then it's possible to invoke
__free_page on a page which is NULL, this naturally leads to a crash.
This can happen when, for example, a process waiting on a MDS reply
receives sigterm.

Fix this by explicitly checking whether the page is set or not.

Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-15 23:28:07 +02:00
Linus Torvalds 101105b171 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 ">rename2() work from Miklos + current_time() from Deepa"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Replace current_fs_time() with current_time()
  fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
  fs: Replace CURRENT_TIME with current_time() for inode timestamps
  fs: proc: Delete inode time initializations in proc_alloc_inode()
  vfs: Add current_time() api
  vfs: add note about i_op->rename changes to porting
  fs: rename "rename2" i_op to "rename"
  vfs: remove unused i_op->rename
  fs: make remaining filesystems use .rename2
  libfs: support RENAME_NOREPLACE in simple_rename()
  fs: support RENAME_NOREPLACE for local filesystems
  ncpfs: fix unused variable warning
2016-10-10 20:16:43 -07:00
NeilBrown 5d7eb1a322 ceph: ignore error from invalidate_inode_pages2_range() in direct write
This call can fail if there are dirty pages.  The preceding call to
filemap_write_and_wait_range() will normally remove dirty pages, but
as inode_lock() is not held over calls to ceph_direct_read_write(), it
could race with non-direct writes and pages could be dirtied
immediately after filemap_write_and_wait_range() returns

If there are dirty pages, they will be removed by the subsequent call
to truncate_inode_pages_range(), so having them here is not a problem.

If the 'ret' value is left holding an error, then in the async IO case
(aio_req is not NULL) the loop that would normally call
ceph_osdc_start_request() will see the error in 'ret' and abort all
requests.  This doesn't seem like correct behaviour.

So use separate 'ret2' instead of overloading 'ret'.

Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-10-03 16:13:49 +02:00
Deepa Dinamani c2050a454c fs: Replace current_fs_time() with current_time()
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.

Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:22 -04:00
Phil Turnbull 955818cd5b ceph: Correctly return NXIO errors from ceph_llseek
ceph_llseek does not correctly return NXIO errors because the 'out' path
always returns 'offset'.

Fixes: 06222e491e ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28 03:00:45 +02:00
Yan, Zheng 9a5530c638 ceph: wait unsafe sync writes for evicting inode
Otherwise ceph_sync_write_unsafe() may access/modify freed inode.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28 02:55:40 +02:00
Yan, Zheng fc8c3892f3 ceph: fix use-after-free bug in ceph_direct_read_write()
ceph_aio_complete() can free the ceph_aio_request struct before
the code exits the while loop.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28 02:55:39 +02:00
Yan, Zheng a22bd5ffae ceph: set user pages dirty after direct IO read
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28 02:55:38 +02:00
Yan, Zheng 7627151ea3 libceph: define new ceph_file_layout structure
Define new ceph_file_layout structure and rename old ceph_file_layout
to ceph_file_layout_legacy. This is preparation for adding namespace
to ceph_file_layout structure.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28 02:55:36 +02:00
Al Viro 00699ad857 Use the right predicate in ->atomic_open() instances
->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache.  Use d_in_lookup() to tell one from another, rather
than d_unhashed().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-05 16:02:23 -04:00
Yan, Zheng 46b59b2be0 ceph: disable fscache when inode is opened for write
All other filesystems do not add dirty pages to fscache. They all
disable fscache when inode is opened for write. Only ceph adds
dirty pages to fscache, but the code is buggy.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-06-01 10:31:07 +02:00
Ilya Dryomov b7ec35b304 libceph: change ceph_osdmap_flag() to take osdc
For the benefit of every single caller, take osdc instead of map.
Also, now that osdc->osdmap can't ever be NULL, drop the check.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-30 23:00:22 +02:00
Linus Torvalds a10c38a4f3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
 "This changeset has a few main parts:

   - Ilya has finished a huge refactoring effort to sync up the
     client-side logic in libceph with the user-space client code, which
     has evolved significantly over the last couple years, with lots of
     additional behaviors (e.g., how requests are handled when cluster
     is full and transitions from full to non-full).

     This structure of the code is more closely aligned with userspace
     now such that it will be much easier to maintain going forward when
     behavior changes take place.  There are some locking improvements
     bundled in as well.

   - Zheng adds multi-filesystem support (multiple namespaces within the
     same Ceph cluster)

   - Zheng has changed the readdir offsets and directory enumeration so
     that dentry offsets are hash-based and therefore stable across
     directory fragmentation events on the MDS.

   - Zheng has a smorgasbord of bug fixes across fs/ceph"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
  ceph: fix wake_up_session_cb()
  ceph: don't use truncate_pagecache() to invalidate read cache
  ceph: SetPageError() for writeback pages if writepages fails
  ceph: handle interrupted ceph_writepage()
  ceph: make ceph_update_writeable_page() uninterruptible
  libceph: make ceph_osdc_wait_request() uninterruptible
  ceph: handle -EAGAIN returned by ceph_update_writeable_page()
  ceph: make fault/page_mkwrite return VM_FAULT_OOM for -ENOMEM
  ceph: block non-fatal signals for fault/page_mkwrite
  ceph: make logical calculation functions return bool
  ceph: tolerate bad i_size for symlink inode
  ceph: improve fragtree change detection
  ceph: keep leaf frag when updating fragtree
  ceph: fix dir_auth check in ceph_fill_dirfrag()
  ceph: don't assume frag tree splits in mds reply are sorted
  ceph: fix inode reference leak
  ceph: using hash value to compose dentry offset
  ceph: don't forbid marking directory complete after forward seek
  ceph: record 'offset' for each entry of readdir result
  ceph: define 'end/complete' in readdir reply as bit flags
  ...
2016-05-26 14:10:32 -07:00
Yan, Zheng 77310320c2 ceph: renew caps for read/write if mds session got killed.
When mds session gets killed, read/write operation may hang.
Client waits for Frw caps, but mds does not know what caps client
wants. To recover this, client sends an open request to mds. The
request will tell mds what caps client wants.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26 01:15:31 +02:00
Ilya Dryomov fe5da05e97 libceph: redo callbacks and factor out MOSDOpReply decoding
If you specify ACK | ONDISK and set ->r_unsafe_callback, both
->r_callback and ->r_unsafe_callback(true) are called on ack.  This is
very confusing.  Redo this so that only one of them is called:

    ->r_unsafe_callback(true), on ack
    ->r_unsafe_callback(false), on commit

or

    ->r_callback, on ack|commit

Decode everything in decode_MOSDOpReply() to reduce clutter.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:28 +02:00
Ilya Dryomov 85e084feb4 libceph: drop msg argument from ceph_osdc_callback_t
finish_read(), its only user, uses it to get to hdr.data_len, which is
what ->r_result is set to on success.  This gains us the ability to
safely call callbacks from contexts other than reply, e.g. map check.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:27 +02:00
Ilya Dryomov bb873b5391 libceph: switch to calc_target(), part 2
The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target.  Encoding now happens within ceph_osdc_start_request().

Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded.  If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.

Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op().  While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:27 +02:00
Ilya Dryomov 63244fa123 libceph: introduce ceph_osd_request_target, calc_target()
Introduce ceph_osd_request_target, containing all mapping-related
fields of ceph_osd_request and calc_target() for calculating mappings
and populating it.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:26 +02:00
Ilya Dryomov d30291b985 libceph: variable-sized ceph_object_id
Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters.  This is enough for all use cases,
expect one - long rbd image names:

- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"

We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh.  (A format 2 header name is
a small system-generated string.)

Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string.  Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:22 +02:00
Ilya Dryomov 13d1ad16d0 libceph: move message allocation out of ceph_osdc_alloc_request()
The size of ->r_request and ->r_reply messages depends on the size of
the object name (ceph_object_id), while the size of ceph_osd_request is
fixed.  Move message allocation into a separate function that would
have to be called after ceph_object_id and ceph_object_locator (which
is also going to become variable in size with RADOS namespaces) have
been filled in:

    req = ceph_osdc_alloc_request(...);
    <fill in req->r_base_oid>
    <fill in req->r_base_oloc>
    ceph_osdc_alloc_messages(req);

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:21 +02:00
Christoph Hellwig 6aa657c852 ceph: use generic_write_sync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Geliang Tang 99ec269779 ceph: use kmem_cache_zalloc
Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:56 +01:00
Yan, Zheng 315f240880 ceph: fix security xattr deadlock
When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.

The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)

Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25 18:51:55 +01:00
Deepa Dinamani 8bbd47140c ceph: replace CURRENT_TIME by current_fs_time()
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25 18:51:52 +01:00
Yan, Zheng a587d71b0a ceph: remove useless BUG_ON
ceph_osdc_start_request() never return -EOLDSNAP

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25 18:51:41 +01:00
Yan, Zheng db6aed7023 ceph: fix snap context leak in error path
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-02-04 18:25:15 +01:00
Dan Carpenter 1418bf076d ceph: checking for IS_ERR instead of NULL
ceph_osdc_alloc_request() returns NULL on error, it never returns error
pointers.

Fixes: 5be0389dac ('ceph: re-send AIO write request when getting -EOLDSNAP error')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-02-04 18:25:08 +01:00
Linus Torvalds 00e3f5cc30 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
 "The two main changes are aio support in CephFS, and a series that
  fixes several issues in the authentication key timeout/renewal code.

  On top of that are a variety of cleanups and minor bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: remove outdated comment
  libceph: kill off ceph_x_ticket_handler::validity
  libceph: invalidate AUTH in addition to a service ticket
  libceph: fix authorizer invalidation, take 2
  libceph: clear messenger auth_retry flag if we fault
  libceph: fix ceph_msg_revoke()
  libceph: use list_for_each_entry_safe
  ceph: use i_size_{read,write} to get/set i_size
  ceph: re-send AIO write request when getting -EOLDSNAP error
  ceph: Asynchronous IO support
  ceph: Avoid to propagate the invalid page point
  ceph: fix double page_unlock() in page_mkwrite()
  rbd: delete an unnecessary check before rbd_dev_destroy()
  libceph: use list_next_entry instead of list_entry_next
  ceph: ceph_frag_contains_value can be boolean
  ceph: remove unused functions in ceph_frag.h
2016-01-24 12:34:13 -08:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Yan, Zheng 99c88e6900 ceph: use i_size_{read,write} to get/set i_size
Cap message from MDS can update i_size. In that case, we don't
hold i_mutex. So it's unsafe to directly access inode->i_size
while holding i_mutex.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-01-21 19:36:08 +01:00
Yan, Zheng 5be0389dac ceph: re-send AIO write request when getting -EOLDSNAP error
When receiving -EOLDSNAP from OSD, we need to re-send corresponding
write request. Due to locking issue, we can send new request inside
another OSD request's complete callback. So we use worker to re-send
request for AIO write.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-01-21 19:36:08 +01:00
Yan, Zheng c8fe9b17d0 ceph: Asynchronous IO support
The basic idea of AIO support is simple, just call kiocb::ki_complete()
in OSD request's complete callback. But there are several special cases.

when IO span multiple objects, we need to wait until all OSD requests
are complete, then call kiocb::ki_complete(). Error handling in this case
is tricky too. For simplify, AIO both span multiple objects and extends
i_size are not allowed.

Another special case is check EOF for reading (other client can write to
the file and extend i_size concurrently). For simplify, the direct-IO/AIO
code path does do the check, fallback to normal syn read instead.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-01-21 19:36:07 +01:00
Zhu, Caifeng b5b98989dc ceph: combine as many iovec as possile into one OSD request
Both ceph_sync_direct_write and ceph_sync_read iterate iovec elements
one by one, send one OSD request for each iovec. This is sub-optimal,
We can combine serveral iovec into one page vector, and send an OSD
request for the whole page vector.

Signed-off-by: Zhu, Caifeng <zhucaifeng@unissoft-nj.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-11-02 23:36:47 +01:00
Yan, Zheng 55b0b31cbc ceph: get inode size for each append write
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-09 09:52:29 +03:00
Jianpeng Ma e36d571d70 ceph: no need to get parent inode in ceph_open
parent inode is needed in creating new inode case.  For ceph_open,
the target inode already exists.

Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08 23:14:29 +03:00
Jianpeng Ma a43137f7b0 ceph: remove the useless judgement
err != 0 is already handled. So skip this.

Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08 23:14:29 +03:00
Linus Torvalds 1dc51b8288 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 "Assorted VFS fixes and related cleanups (IMO the most interesting in
  that part are f_path-related things and Eric's descriptor-related
  stuff).  UFS regression fixes (it got broken last cycle).  9P fixes.
  fs-cache series, DAX patches, Jan's file_remove_suid() work"

[ I'd say this is much more than "fixes and related cleanups".  The
  file_table locking rule change by Eric Dumazet is a rather big and
  fundamental update even if the patch isn't huge.   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
  9p: cope with bogus responses from server in p9_client_{read,write}
  p9_client_write(): avoid double p9_free_req()
  9p: forgetting to cancel request on interrupted zero-copy RPC
  dax: bdev_direct_access() may sleep
  block: Add support for DAX reads/writes to block devices
  dax: Use copy_from_iter_nocache
  dax: Add block size note to documentation
  fs/file.c: __fget() and dup2() atomicity rules
  fs/file.c: don't acquire files->file_lock in fd_install()
  fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
  vfs: avoid creation of inode number 0 in get_next_ino
  namei: make set_root_rcu() return void
  make simple_positive() public
  ufs: use dir_pages instead of ufs_dir_pages()
  pagemap.h: move dir_pages() over there
  remove the pointless include of lglock.h
  fs: cleanup slight list_entry abuse
  xfs: Correctly lock inode when removing suid and file capabilities
  fs: Call security_ops->inode_killpriv on truncate
  fs: Provide function telling whether file_remove_privs() will do anything
  ...
2015-07-04 19:36:06 -07:00