Commit Graph

426 Commits

Author SHA1 Message Date
Linus Torvalds d042380886 - Core Frameworks
- Add the MFD bindings doc to MAINTAINERS
 
 - New Drivers
    - X-Powers AC100 Audio CODEC and RTC
    - TI LP873x PMIC
    - Rockchip RK808 PMIC
    - Samsung Exynos Low Power Audio
 
  - New Device Support
    - Add support for STMPE1600 variant to stmpe
    - Add support for PM8018 PMIC to pm8921-core
    - Add support for AXP806 PMIC in axp20x
    - Add support for AXP209 GPIO in axp20x
 
  - New Functionality
    - Add support for Reset to all STMPE variants
    - Add support for MKBP event support to cros_ec
    - Add support for USB to intel_soc_pmic_bxtwc
    - Add support for IRQs and Power Button to tps65217
 
  - Fix-ups
    - Clean-up defunct author emails; da9063, max14577
    - Kconfig fixups; wm8350-i2c, as3722
    - Constify; altera-a10sr, sm501
    - Supply PCI IDs; intel-lpss-pci
    - Improve clocking; qcom_rpm
    - Fix IRQ probing; ucb1x00-core
    - Ensure fault log is cleared; da9052
    - Remove NO_IRQ check; ucb1x00-core
    - Supply I2C properties; intel-lpss-acpi, intel-lpss-pci
    - Non standard declaration; tps65217, max8997-irq
    - Remove unused code; lp873x, db8500-prcmu, ab8500-debugfs,
                          cros_ec_spi
    - Make non-modular; altera-a10sr, intel_msic, smsc-ece1099,
                        sun6i-prcm, twl-core,
    - OF bindings; ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808,
                   axp20x, lp873x, exynos5433-lpass, act8945a,
                   aspeed-scu, twl6040, arizona
 
  - Bug Fixes
    - Release OF pointer; qcom_rpm
    - Avoid double shifting in suspend/resume; 88pm80x
    - Fix 'defined but not used' error; exynos-lpass
    - Fix 'sleeping whilst attomic'; atmel-hlcdc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJX9giOAAoJEFGvii+H/Hdh8aEP/iiHosBZsksZ4we8KAdoXkxi
 x5nnJvS9+4b5yaasSiN8e2xs9YMOlHu1CNZDZ3RJZ+rLusdVeg5ju5p5WED83pvi
 ltiPMhyqruM3d0rieTRHxeJFmmEf2exwKV3Y+5lo9586dFfJrmGp2AxScId4TtwP
 CcsjwYRx/WvVfWrv1xWsjd9b1RDlWglt3dcVhdKAQbvPPOy5O4ymXNMFs0DuFyZ+
 2A16sw7hdYenXSvAHlZzS5IqXP9JEeosu3O/mUUZKF3PO55t+KbQBGZiwXoal4gp
 1dwrdBjlrZaHcDa5Ra9x+jQ2kxIkyUT44CXKAHa7llTfZQkZIgnv/fWUhB8C5JxU
 iaqnN9rWQ2MNjt3Us/n1TSJH2kEnSNbzrQixE0n8yjIBsZePWlW2ZpWYRF7GPG2i
 2pB8oNz/NdDkKWdosR3ArnseNOKVcC+GtD+mHk0aKMPghPq+gDIRrdM0CFyWeIZE
 w/Cf+HHZPR0O1VuYZ9bHIhbgnEbz5xUADOtBAdppIBQiNEI/G9lJpG6Ft4FTQoPi
 CIbnnB/wxxMaEl85rUPYGkxQniuUI5f0tMv3k2ZtAZMKcqn6iXtiIOuXceM2vUdy
 ze1uddH4HuHLcrJT5x+J72XJL6RXzZKxOqd0b7BcXnvMVFJrWgleH1JQ2WqazAEW
 il1u28IkFusm/BW/0dps
 =Ja7p
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...
2016-10-07 08:35:35 -07:00
Paul Gortmaker ed401e8ff4 mfd: as3722: Convert MFD_AS3722 from bool to tristate
The Kconfig currently controlling compilation of this code is:

drivers/mfd/Kconfig:config MFD_AS3722
drivers/mfd/Kconfig:    bool "ams AS3722 Power Management IC"

...meaning that it currently is not being built as a module by anyone.

In response to an earlier patch set suggesting removal of the unused
modular code, Laxman suggested that this driver be instead moved to
tristate.

We do that here, and confirm it can build and modpost as a tristate.
However there remains to be runtime testing in order to ensure this
change is 100% functional for "=m".

Cc: Florian Lobmaier <florian.lobmaier@ams.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04 15:48:03 +01:00
Marcin Niestroj 6556bdacf6 mfd: tps65217: Add support for IRQs
Add support for handling IRQs: power button, AC and USB power state
changes. Mask and interrupt bits are shared within one register, which
prevents us to use regmap_irq implementation. New irq_domain is created in
order to add interrupt handling for each tps65217's subsystem. IRQ
resources have been added for charger subsystem to be able to notify about
AC and USB state changes.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04 15:48:03 +01:00
Sylwester Nawrocki c695abab24 mfd: Add Samsung Exynos Low Power Audio Subsystem driver
This patch adds common driver for the Top block of the Samsung Exynos
SoC Low Power Audio Subsystem.  This is a minimal driver which prepares
resources for IP blocks like I2S, audio DMA and UART and exposes
a regmap for the Top block registers.  Also system power ops are added
to ensure the Audio Subsystem is operational after system suspend/resume
cycle.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04 15:48:02 +01:00
Uwe Kleine-König 88003fb10f mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
This fixes a compile failure:

	drivers/built-in.o: In function `wm8350_i2c_probe':
	core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c'
	Makefile:953: recipe for target 'vmlinux' failed

Fixes: 52b461b86a ("mfd: Add regmap cache support for wm8350")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04 15:48:01 +01:00
Lee Jones b304746c2a Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', 'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged 2016-10-04 15:47:01 +01:00
Linus Walleij ac2a8bca03 Merge branch 'ib-move-htc-egpio' into devel 2016-09-28 09:30:21 -07:00
Linus Walleij 3c6e8d05d6 mfd/gpio: Move HTC GPIO driver to GPIO subsystem
The HTC GPIO driver is a pure GPIO driver and I just can not
see what it is doing inside MFD. Let's just move it to GPIO
and take this opportunity to move the platform data to
<linux/platform_data/gpio-htc-egpio.h>

Cc: arm@kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-28 09:28:34 -07:00
Wadim Egorov 2eedcbfc06 mfd: rk808: Add RK818 support
The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:

- Regulators
- RTC
- Clocking
- Battery support

Both RK808 and RK818 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 13:48:25 +01:00
Keerthy dc21c7ad3a mfd: lp873x: Add lp873x PMIC support
The LP873X chip is a power management IC for Portable Navigation Systems
    and Tablet Computing devices. It contains the following components:

     - Regulators.
     - Configurable General Purpose Output Signals (GPO).

PMIC interacts with the main processor through i2c. PMIC has
couple of LDOs (Linear Regulators), couple of BUCKs (Step-Down DC-DC
Converter Cores) and GPOs (General Purpose Output Signals).

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 13:20:31 +01:00
Chen-Yu Tsai 585083c539 mfd: ac100: Add driver for X-Powers AC100 audio codec / RTC combo IC
The AC100 is a multifunction device with an audio codec subsystem and
an RTC subsystem. These two subsystems share a common register space
and host interface.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-08 12:53:26 +01:00
Michael Brunner 1db3ba2830 mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driver
This is an unmodified resend of the patch already been sent on
February 17 as it seems to have fallen through the net.

This patch adds the DMI system ID of the Kontron COMe-cSL6 and
COME-mAL10 boards to the Kontron PLD driver. The list of supported
products in the module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29 10:16:36 +01:00
Javier Martinez Canillas 59a9b273e3 mfd: max14577: Allow driver to be built as a module
The driver's Kconfig symbol is a boolean but nothing prevents the driver
to be built as a module instead of built-in. It is true that most system
integrators will choose the latter but the config should not restrict it.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29 10:14:44 +01:00
Thor Thayer 9787f5e28b mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip
Add support for the Altera Arria10 Development Kit System Resource
chip which is implemented using a MAX5 as a external gpio extender
with the regmap framework over a SPI bus.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29 10:14:37 +01:00
Stefan Agner a99ab50dbb mfd: rn5t618: Add Ricoh RN5T567 PMIC support
The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is,
the differences are:

+ DCDC4
+ Slightly different output voltage/currents
+ 32kHz Output
- ADC/Charger capabilities

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29 10:11:23 +01:00
Chen Feng b52207ef4e mfd: hi655x: Add MFD driver for hi655x
Add PMIC MFD driver to support hisilicon hi665x.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-18 08:25:26 +01:00
Arnd Bergmann fcdad4210f mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependency
The MFD_VEXPRESS_SYSREG driver selects CLKSRC_MMIO, which in turn
conflicts with ARCH_USES_GETTIMEOFFSET, causing a harmless Kconfig
warning when it is set:

warning: (ARCH_MVEBU && ARCH_DIGICOLOR && ARCH_GEMINI && ARCH_KEYSTONE && ARCH_MOXART && ARCH_MXS && PLAT_SPEAR && ARCH_SUNXI && ARCH_TEGRA && ARCH_U300 && PLAT_ORION && ARCH_CLPS711X && ARCH_EP93XX && ARCH_NETX && ARCH_IXP4XX && ARCH_KS8695 && ARCH_W90X900 && ARCH_PXA && ARCH_SA1100 && ARCH_OMAP1 && ARCH_BCM_IPROC && ARCH_INTEGRATOR_AP && ARCH_OMAP2PLUS && MFD_VEXPRESS_SYSREG) selects CLKSRC_MMIO which has unmet direct dependencies (!ARCH_USES_GETTIMEOFFSET)

This was apparently hidden by the fact that no ARM platform that
still sets ARCH_USES_GETTIMEOFFSET has gpiolib support, and we
already have a dependency on GPIOLIB that I added a while ago.

However, after 296ad4acb8 ("gpio: remove deps on
ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB"), any platform can enable
CONFIG_GPIOLIB, and that lets us enable MFD_VEXPRESS_SYSREG
as well.

This adds an explicit dependency on !ARCH_USES_GETTIMEOFFSET
to guarantee that we can enable the CLKSRC_MMIO driver without
getting warnings.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09 16:26:04 +01:00
Laxman Dewangan 327156c593 mfd: max77620: Add core driver for MAX77620/MAX20024
MAX77620/MAX20024 are Power Management IC from the MAXIM.
It supports RTC, multiple GPIOs, multiple DCDC and LDOs,
watchdog, clock etc.

Add MFD drier to provides common support for accessing the
device; additional drivers is developed on respected subsystem
in order to use the functionality of the device.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09 15:42:00 +01:00
Brian Norris ba5776ab6f mfd: cros_ec: Allow building for ARM64
There are platforms using the ChromeOS embeded controller on ARM64 now,
so let's allow using this driver (without having to use COMPILE_TEST).

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19 07:59:59 +01:00
Krzysztof Kozlowski 073d4aca34 mfd: max77693: Allow building as a module
The consumer of max77693 regulators on Trats2 board (samsung-usb2-phy
driver) supports deferred probing so the max77693 main MFD driver can be
built now as a module. This gives more flexibility and removes manual
ordering of init calls.

Suggested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19 07:53:52 +01:00
Javier Martinez Canillas a52e46ce9c mfd: max77686: Allow driver to be built as a module
The driver's Kconfig symbol is a boolean but nothing prevents the driver
to be built as a module instead of built-in. It is true that most system
integrators will choose the latter but the config should not restrict it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:38 +00:00
Wenyou Yang b25c6b7d28 mfd: act8945a: Add Active-semi ACT8945A PMIC MFD driver
This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
 - Regulator
 - Charger

It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:25 +00:00
Charles Keepax f4d34c94ff mfd: arizona: Remove duplicate select of MFD_CORE
MFD_ARIZONA_I2C and MFD_ARIZONA_SPI both select MFD_ARIZONA and all
three of those select MFD_CORE, this makes the selects of MFD_CORE in
MFD_ARIZONA_I2C and MFD_ARIZONA_SPI redundant, so we remove them.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:23 +00:00
Charles Keepax 5dbd47840a mfd: arizona: Update small typo in Arizona SPI Kconfig
The help text had a copy and paste error and refers to I2C in the SPI
section. This patch corrects this typo.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:19 +00:00
Andrew F. Davis b45b719ee0 mfd: tps65086: Add driver for the TPS65086 PMIC
Add support for the TPS65912 device. It provides communication
through I2C and contains the following components:

 - Regulators
 - Load switches
 - GPO controller

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:15 +00:00
Axel Lin c2e04af072 mfd: Allow i2c modular drivers to build with I2C=m
These drivers can be built as module, so make them depend on I2C rather
than I2C=y.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09 12:58:52 +07:00
Lee Jones bab070620e Merge branches 'ib-mfd-clk-4.6', 'ib-mfd-input-iio-4.6', 'ib-mfd-regulator-4.6' and 'ib-mfd-regulator-gpio-4.6' into ibs-for-mfd-merged 2016-03-09 12:56:47 +07:00
Chen-Yu Tsai 02071f0f79 mfd: axp20x: Add support for RSB based AXP223 PMIC
The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
It is functionally identical to AXP221; only the regulator default
voltage/status and the external host interface are different.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12 08:54:42 +00:00
Chen-Yu Tsai 4fd4115142 mfd: axp20x: Split the driver into core and i2c bits
The axp20x driver assumes the device is i2c based. This is not the
case with later chips, which use a proprietary 2 wire serial bus
by Allwinner called "Reduced Serial Bus".

This patch follows the example of mfd/wm831x and splits it into
an interface independent core, and an i2c specific glue layer.
MFD_AXP20X and the new MFD_AXP20X_I2C are changed to tristate
symbols, allowing the driver to be built as modules.

Whitespace and other style errors in the moved i2c specific code
have been fixed. Included but unused header files are removed as
well.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12 08:53:03 +00:00
Andrew F. Davis 796f5692da mfd: tps65912: Add driver for the TPS65912 PMIC
This patch adds support for TPS65912 PMIC MFD core. It provides
communication through the I2C and SPI interfaces. It contains
the following components:

 - Regulators
 - GPIO controller

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11 16:30:59 +00:00
Andrew F. Davis 65b6555971 mfd: tps65912: Remove old driver in preparation for new driver
The old tps65912 driver is being replaced, delete old driver.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11 16:30:31 +00:00
Markus Pargmann e2fccf5c15 mfd: fsl-imx25-tsadc: Register touchscreen ADC driver
This is the core driver for imx25 touchscreen/adc driver. The module
has one shared ADC and two different conversion queues which use the
ADC. The two queues are identical. Both can be used for general purpose
ADC but one is meant to be used for touchscreens.

This driver is the core which manages the central components and
registers of the TSC/ADC unit. It manages the IRQs and forwards them to
the correct components.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Denis Carikli <denis@eukrea.com>
[ensure correct ADC clock depending on the IPG clock]
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11 15:40:41 +00:00
Geert Uytterhoeven 8726cacc7f mfd: da9063: Allow modular build
Allow support for the DA9063 PMIC to be modular, cfr. DA9062, which
allows to decrease size of multi-platform kernels (e.g.
multi_v7_defconfig).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11 06:41:52 +00:00
Richard Fitzgerald ea1f333990 mfd: arizona: Support Cirrus Logic CS47L24 and WM1831
This patch adds the regmap configuration tables and
core MFD handling for the CS47L24 and WM1831 codecs.

Note that compared to the other Arizona codecs, these devices
do not have an LDO1 or micsupp regulators, extcon driver, or
the DCVDD isolation control.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04 08:46:39 +00:00
Axel Lin 18eb3f041a mfd: Make TPS6105X select REGMAP_I2C
This is required since
commit 7e50711993 ("mfd: tps6105x: Use i2c regmap to access registers").

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:20:12 +00:00
Micky Ching ce6a5acc93 mfd: rtsx: Add support for rts522A
rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227.
Add it to file mfd/rts5227.c to support this chip.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:19:51 +00:00
Luis de Bethencourt 5349ca11ca mfd: Kconfig: Compile MFD_STW481X with COMPILE_TEST
The driver depends on ARCH_NOMADIK but there isn't a build dependency
so it's a good idea to allow the driver to always be built when the
COMPILE_TEST option is enabled.

That way, the driver can be built with a config generated by make
allyesconfig and check if a patch would break the build.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:19:50 +00:00
Cyrille Pitchen 5c41f11c62 mfd: atmel-flexcom: Add a driver for Atmel Flexible Serial Communication Unit
This driver supports the new Atmel Flexcom. The Flexcom is a wrapper which
integrates one SPI controller, one I2C controller and one USART. Only one
function can be enabled at a time. This driver selects the function once
for all, when the Flexcom is probed, according to the value of the new
"atmel,flexcom-mode" device tree property.

This driver has chosen to present the Flexcom to the system as a MFD so
the implementation is seamless for the existing Atmel SPI, I2C and USART
drivers.

Also the Flexcom embeds FIFOs: the latest patches of the SPI, I2C and
USART drivers take advantage of this new feature.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:19:49 +00:00
Linus Torvalds f377ea88b8 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm for 4.3.  Nouveau is
  probably the biggest amount of changes in here, since it missed 4.2.
  Highlights below, along with the usual bunch of fixes.

  All stuff outside drm should have applicable acks.

  Highlights:

   - new drivers:
        freescale dcu kms driver

   - core:
        more atomic fixes
        disable some dri1 interfaces on kms drivers
        drop fb panic handling, this was just getting more broken, as more locking was required.
        new core fbdev Kconfig support - instead of each driver enable/disabling it
        struct_mutex cleanups

   - panel:
        more new panels
        cleanup Kconfig

   - i915:
        Skylake support enabled by default
        legacy modesetting using atomic infrastructure
        Skylake fixes
        GEN9 workarounds

   - amdgpu:
        Fiji support
        CGS support for amdgpu
        Initial GPU scheduler - off by default
        Lots of bug fixes and optimisations.

   - radeon:
        DP fixes
        misc fixes

   - amdkfd:
        Add Carrizo support for amdkfd using amdgpu.

   - nouveau:
        long pending cleanup to complete driver,
        fully bisectable which makes it larger,
        perfmon work
        more reclocking improvements
        maxwell displayport fixes

   - vmwgfx:
        new DX device support, supports OpenGL 3.3
        screen targets support

   - mgag200:
        G200eW support
        G200e new revision support

   - msm:
        dragonboard 410c support, msm8x94 support, msm8x74v1 support
        yuv format support
        dma plane support
        mdp5 rotation
        initial hdcp

   - sti:
        atomic support

   - exynos:
        lots of cleanups
        atomic modesetting/pageflipping support
        render node support

   - tegra:
        tegra210 support (dc, dsi, dp/hdmi)
        dpms with atomic modesetting support

   - atmel:
        support for 3 more atmel SoCs
        new input formats, PRIME support.

   - dwhdmi:
        preparing to add audio support

   - rockchip:
        yuv plane support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  ...
2015-09-04 15:49:32 -07:00
Javier Martinez Canillas b9124a5230 mfd: Add MFD_CROS_EC dependencies
The MFD_CROS_EC symbol select CHROME_PLATFORMS and CROS_EC_PROTO but
that caused a Kconfig unmet direct dependencies warning since these
symbols could only be selected for X86 || ARM.

The fix it, the CHROME_PLATFORMS dependencies were relexed on commit
d12bbcd3ea ("platform/chrome: Don't make CHROME_PLATFORMS depends
on X86 || ARM") but that was found to be wrong and the correct fix
is to add the needed dependencies to the MFD_CROS_EC config symbol.

There are only x86 and ARM based Chromebooks so to avoid showing up
the config option on unsupported platforms, make the symbol depend on
these architectures. Also add a || COMPILE_TEST so it can have build
coverage on other platforms.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-24 15:15:31 +01:00
Javier Martinez Canillas da935c0b6e mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers
The ChromeOS EC SPI and I2C transport drivers depends on CROS_EC_PROTO
but MFD_CROS_EC select CROS_EC_PROTO instead. Mixing select and depends
on is bad practice as it may lead to circular Kconfig dependencies.

Since these drivers already depend on MFD_CROS_EC and that config option
already selects CROS_EC_PROTO, there is no need to make them explicitly
depend on CROS_EC_PROTO since that dependency is already met.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-24 15:15:25 +01:00
Dave Airlie 4eebf60b74 Linux 4.2-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV0R4AAAoJEHm+PkMAQRiG8xIH/AmiRd+JDrs0qqEy46p6X8Gn
 0lB5/KsGycvIGIBTiy2nZzcT0Ly6LeFUKUjzPytlOhIZPMrxMVMShDaQKCXXIMUr
 1mN6hkvpkLNnUhvL2fR6mm0zkjbz3zZEazFY+Jic8wQrtSkHgfH0DXqSAo8le0f8
 kNrd5BPPhIwvpHGaNGFdTpbgpPcalXyQk/fHyvDGidbyXzY/d7l05QfYJ6XCD4Zm
 IAy48iK5BFts2+z3aOYrOeuuCcm1qFX8YArqzE1rfPp+U/LQpfUfij4cmOqDLn/F
 qnv9E7bRRVovvrgKe4I3Trta8kT53VLJvqpdw2Usqo8zvhs4VyrYpHC+gEE6YUY=
 =9Rd4
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-rc7' into drm-next

Linux 4.2-rc7

Backmerge master for i915 fixes
2015-08-17 14:13:53 +10:00
Michael Brunner 18ca2ba599 mfd: kempld-core: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver
This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6
boards to the Kontron PLD driver. The list of supported products in the
module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:08:50 +01:00
S Twiss 9b40b030c4 mfd: da9062: Supply core driver
Add MFD core driver support for DA9062

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:08:45 +01:00
Richard Fitzgerald 6887b042c5 mfd: arizona: Add support for WM8998 and WM1814
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:08:42 +01:00
Javier Martinez Canillas acdecb04e2 mfd: Remove MFD_CROS_EC_SPI depends on OF
The ChromeOS EC SPI transport driver has a dependency on OF because it
uses some OF helpers from the <linux/of.h> header. But there isn't a
need for an explicit dependency since the header has stub functions if
CONFIG_OF is not defined.

Also, MFD_CROS_EC_SPI already depends on MFD_CROS_EC which in turn has
a dependency on OF so in practice can't be selected without CONFIG_OF.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:08:41 +01:00
Andy Shevchenko 4b45efe852 mfd: Add support for Intel Sunrisepoint LPSS devices
The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH.
The main difference to the previous platforms is that the LPSS devices are
compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are
present.

This patch brings the driver for such devices found on Sunrisepoint PCH.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-28 09:56:47 +01:00
Javier Martinez Canillas fb9caeedaf mfd: Remove MFD_CROS_EC_SPI depends on OF
The ChromeOS EC SPI transport driver has a dependency on OF because it
uses some OF helpers from the <linux/of.h> header. But there isn't a
need for an explicit dependency since the header has stub functions if
CONFIG_OF is not defined.

Also, MFD_CROS_EC_SPI already depends on MFD_CROS_EC which in turn has
a dependency on OF so in practice can't be selected without CONFIG_OF.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-24 09:05:44 +01:00
Shobhit Kumar 04cbfe68c3 mfd: Add GPIOLIB dependency if INTEL_SOC_PMIC is to be enabled
This is needed as the CRC PMIC has support for Panel
enable/diable as gpio which needs 'gpiod_add_lookup_table'
and 'gpiod_remove_lookup_table' from gpiolib. This patch
can be squashed with below commit in topic/crc-pmic branch

    commit 61dd2ca2d4
    Author: Shobhit Kumar <shobhit.kumar@intel.com>
    Date:   Fri Jun 26 14:32:05 2015 +0530

    mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO
    signal

    On some Intel SoC platforms, the panel enable/disable signals
    are controlled by CRC PMIC. Add those control as a new GPIO in a
    lookup table for gpio-crystalcove chip during CRC driver load

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-22 11:18:41 +02:00
Geert Uytterhoeven 6fafecc12d mfd: Allow compile test of GPIO consumers if !GPIOLIB
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22 12:25:06 +01:00