Commit Graph

245 Commits

Author SHA1 Message Date
Nick Piggin c2ec175c39 mm: page_mkwrite change prototype to match fault
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags.  There should be no functional change.

This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg.  virtual_address to the
driver, which might be important in some special cases).

This is required for a subsequent fix.  And will also make it easier to
merge page_mkwrite() with fault() in future.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:14 -07:00
KOSAKI Motohiro bd775c42ea mm: add comment why mark_page_accessed() would be better than pte_mkyoung() in follow_page()
At first look, mark_page_accessed() in follow_page() seems a bit strange.
It seems pte_mkyoung() would be better consistent with other kernel code.

However, it is intentional. The commit log said:

    ------------------------------------------------
    commit 9e45f61d69be9024a2e6bef3831fb04d90fac7a8
    Author: akpm <akpm>
    Date:   Fri Aug 15 07:24:59 2003 +0000

    [PATCH] Use mark_page_accessed() in follow_page()

    Touching a page via follow_page() counts as a reference so we should be
    either setting the referenced bit in the pte or running mark_page_accessed().

    Altering the pte is tricky because we haven't implemented an atomic
    pte_mkyoung().  And mark_page_accessed() is better anyway because it has more
    aging state: it can move the page onto the active list.

    BKrev: 3f3c8acbplT8FbwBVGtth7QmnqWkIw
    ------------------------------------------------

The atomic issue is still true nowadays. adding comment help to understand
code intention and it would be better.

[akpm@linux-foundation.org: clarify text]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:12 -07:00
KOSAKI Motohiro 0a0dd05dd7 mm: don't call mark_page_accessed() in do_swap_page()
commit bf3f3bc5e7 (mm: don't
mark_page_accessed in fault path) only remove the mark_page_accessed() in
filemap_fault().

Therefore, swap-backed pages and file-backed pages have inconsistent
behavior.  mark_page_accessed() should be removed from do_swap_page().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:11 -07:00
Pallipadi, Venkatesh 895791dac6 VM, x86, PAT: add a new vm flag to track full pfnmap at mmap
Impact: cleanup

Add a new vm flag VM_PFN_AT_MMAP to identify a PFNMAP that is
fully mapped with remap_pfn_range. Patch removes the overloading
of VM_INSERTPAGE from the earlier patch.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Nick Piggin <npiggin@suse.de>
LKML-Reference: <20090313233543.GA19909@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-14 09:47:44 +01:00
Pallipadi, Venkatesh 4bb9c5c021 VM, x86, PAT: Change is_linear_pfn_mapping to not use vm_pgoff
Impact: fix false positive PAT warnings - also fix VirtalBox hang

Use of vma->vm_pgoff to identify the pfnmaps that are fully
mapped at mmap time is broken. vm_pgoff is set by generic mmap
code even for cases where drivers are setting up the mappings
at the fault time.

The problem was originally reported here:

 http://marc.info/?l=linux-kernel&m=123383810628583&w=2

Change is_linear_pfn_mapping logic to overload VM_INSERTPAGE
flag along with VM_PFNMAP to mean full PFNMAP setup at mmap
time.

Problem also tracked at:

 http://bugzilla.kernel.org/show_bug.cgi?id=12800

Reported-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha>@intel.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: "ebiederm@xmission.com" <ebiederm@xmission.com>
Cc: <stable@kernel.org> # only for 2.6.29.1, not .28
LKML-Reference: <20090313004527.GA7176@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 04:28:50 +01:00
Carsten Otte ab92661d5d do_wp_page: fix regression with execute in place
Fix do_wp_page for VM_MIXEDMAP mappings.

In the case where pfn_valid returns 0 for a pfn at the beginning of
do_wp_page and the mapping is not shared writable, the code branches to
label `gotten:' with old_page == NULL.

In case the vma is locked (vma->vm_flags & VM_LOCKED), lock_page,
clear_page_mlock, and unlock_page try to access the old_page.

This patch checks whether old_page is valid before it is dereferenced.

The regression was introduced by "mlock: mlocked pages are unevictable"
(commit b291f00039).

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05 12:56:48 -08:00
venkatesh.pallipadi@intel.com e4b866ed19 x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param
Impact: cleanup

Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer.
Subsequent patch changes the x86 PAT handling to return a compatible
memtype in pgprot_t, if what was requested cannot be allowed due to conflicts.
No fuctionality change in this patch.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 19:13:01 +01:00
venkatesh.pallipadi@intel.com a367061311 x86 PAT: remove PFNMAP type on track_pfn_vma_new() error
Impact: fix (harmless) double-free of memtype entries and avoid warning

On track_pfn_vma_new() failure, reset the vm_flags so that there will be
no second cleanup happening when upper level routines call unmap_vmas().

This patch fixes part of the bug reported here:

  http://marc.info/?l=linux-kernel&m=123108883716357&w=2

Specifically the error message:

  X:5010 freeing invalid memtype d0000000-d0101000

Is due to multiple frees on error path, will not happen with the patch below.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 19:12:59 +01:00
Peter Zijlstra 95156f0051 lockdep, mm: fix might_fault() annotation
Some code (nfs/sunrpc) uses socket ops on kernel memory while holding
the mmap_sem, this is safe because kernel memory doesn't get paged out,
therefore we'll never actually fault, and the might_fault() annotations
will generate false positives.

Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 13:09:18 +01:00
KAMEZAWA Hiroyuki 03f3c43364 memcg: fix swap accounting leak
Fix swapin charge operation of memcg.

Now, memcg has hooks to swap-out operation and checks SwapCache is really
unused or not.  That check depends on contents of struct page.  I.e.  If
PageAnon(page) && page_mapped(page), the page is recoginized as
still-in-use.

Now, reuse_swap_page() calles delete_from_swap_cache() before establishment
of any rmap. Then, in followinig sequence

	(Page fault with WRITE)
	try_charge() (charge += PAGESIZE)
	commit_charge() (Check page_cgroup is used or not..)
	reuse_swap_page()
		-> delete_from_swapcache()
			-> mem_cgroup_uncharge_swapcache() (charge -= PAGESIZE)
	......
New charge is uncharged soon....
To avoid this,  move commit_charge() after page_mapcount() goes up to 1.
By this,

	try_charge()		(usage += PAGESIZE)
	reuse_swap_page()	(may usage -= PAGESIZE if PCG_USED is set)
	commit_charge()		(If page_cgroup is not marked as PCG_USED,
				 add new charge.)
Accounting will be correct.

Changelog (v2) -> (v3)
  - fixed invalid charge to swp_entry==0.
  - updated documentation.
Changelog (v1) -> (v2)
  - fixed comment.

[nishimura@mxp.nes.nec.co.jp: swap accounting leak doc fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki 2c26fdd70c memcg: revert gfp mask fix
My patch, memcg-fix-gfp_mask-of-callers-of-charge.patch changed gfp_mask
of callers of charge to be GFP_HIGHUSER_MOVABLE for showing what will
happen at memory reclaim.

But in recent discussion, it's NACKed because it sounds ugly.

This patch is for reverting it and add some clean up to gfp_mask of
callers of charge.  No behavior change but need review before generating
HUNK in deep queue.

This patch also adds explanation to meaning of gfp_mask passed to charge
functions in memcontrol.h.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:06 -08:00
KAMEZAWA Hiroyuki 8c7c6e34a1 memcg: mem+swap controller core
This patch implements per cgroup limit for usage of memory+swap.  However
there are SwapCache, double counting of swap-cache and swap-entry is
avoided.

Mem+Swap controller works as following.
  - memory usage is limited by memory.limit_in_bytes.
  - memory + swap usage is limited by memory.memsw_limit_in_bytes.

This has following benefits.
  - A user can limit total resource usage of mem+swap.

    Without this, because memory resource controller doesn't take care of
    usage of swap, a process can exhaust all the swap (by memory leak.)
    We can avoid this case.

    And Swap is shared resource but it cannot be reclaimed (goes back to memory)
    until it's used. This characteristic can be trouble when the memory
    is divided into some parts by cpuset or memcg.
    Assume group A and group B.
    After some application executes, the system can be..

    Group A -- very large free memory space but occupy 99% of swap.
    Group B -- under memory shortage but cannot use swap...it's nearly full.

    Ability to set appropriate swap limit for each group is required.

Maybe someone wonder "why not swap but mem+swap ?"

  - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
    to move account from memory to swap...there is no change in usage of
    mem+swap.

    In other words, when we want to limit the usage of swap without affecting
    global LRU, mem+swap limit is better than just limiting swap.

Accounting target information is stored in swap_cgroup which is
per swap entry record.

Charge is done as following.
  map
    - charge  page and memsw.

  unmap
    - uncharge page/memsw if not SwapCache.

  swap-out (__delete_from_swap_cache)
    - uncharge page
    - record mem_cgroup information to swap_cgroup.

  swap-in (do_swap_page)
    - charged as page and memsw.
      record in swap_cgroup is cleared.
      memsw accounting is decremented.

  swap-free (swap_free())
    - if swap entry is freed, memsw is uncharged by PAGE_SIZE.

There are people work under never-swap environments and consider swap as
something bad. For such people, this mem+swap controller extension is just an
overhead.  This overhead is avoided by config or boot option.
(see Kconfig. detail is not in this patch.)

TODO:
 - maybe more optimization can be don in swap-in path. (but not very safe.)
   But we just do simple accounting at this stage.

[nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex]
[hugh@veritas.com: memswap controller core swapcache fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki bced0520fe memcg: fix gfp_mask of callers of charge
Fix misuse of gfp_kernel.

Now, most of callers of mem_cgroup_charge_xxx functions uses GFP_KERNEL.

I think that this is from the fact that page_cgroup *was* dynamically
allocated.

But now, we allocate all page_cgroup at boot.  And
mem_cgroup_try_to_free_pages() reclaim memory from GFP_HIGHUSER_MOVABLE +
specified GFP_RECLAIM_MASK.

  * This is because we just want to reduce memory usage.
    "Where we should reclaim from ?" is not a problem in memcg.

This patch modifies gfp masks to be GFP_HIGUSER_MOVABLE if possible.

Note: This patch is not for fixing behavior but for showing sane information
      in source code.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
KAMEZAWA Hiroyuki 7a81b88cb5 memcg: introduce charge-commit-cancel style of functions
There is a small race in do_swap_page().  When the page swapped-in is
charged, the mapcount can be greater than 0.  But, at the same time some
process (shares it ) call unmap and make mapcount 1->0 and the page is
uncharged.

      CPUA 			CPUB
       mapcount == 1.
   (1) charge if mapcount==0     zap_pte_range()
                                (2) mapcount 1 => 0.
			        (3) uncharge(). (success)
   (4) set page's rmap()
       mapcount 0=>1

Then, this swap page's account is leaked.

For fixing this, I added a new interface.
  - charge
   account to res_counter by PAGE_SIZE and try to free pages if necessary.
  - commit
   register page_cgroup and add to LRU if necessary.
  - cancel
   uncharge PAGE_SIZE because of do_swap_page failure.

     CPUA
  (1) charge (always)
  (2) set page's rmap (mapcount > 0)
  (3) commit charge was necessary or not after set_pte().

This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting.
Usual mem_cgroup_charge_common() does charge -> commit at a time.

And this patch also adds following function to clarify all charges.

  - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge()
	called against newly allocated anon pages.

  - mem_cgroup_charge_migrate_fixup()
        called only from remove_migration_ptes().
	we'll have to rewrite this later.(this patch just keeps old behavior)
	This function will be removed by additional patch to make migration
	clearer.

Good for clarifying "what we do"

Then, we have 4 following charge points.
  - newpage
  - swap-in
  - add-to-cache.
  - migration.

[akpm@linux-foundation.org: add missing inline directives to stubs]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
Ying Han 4779280d1e mm: make get_user_pages() interruptible
The initial implementation of checking TIF_MEMDIE covers the cases of OOM
killing.  If the process has been OOM killed, the TIF_MEMDIE is set and it
return immediately.  This patch includes:

1.  add the case that the SIGKILL is sent by user processes.  The
   process can try to get_user_pages() unlimited memory even if a user
   process has sent a SIGKILL to it(maybe a monitor find the process
   exceed its memory limit and try to kill it).  In the old
   implementation, the SIGKILL won't be handled until the get_user_pages()
   returns.

2.  change the return value to be ERESTARTSYS.  It makes no sense to
   return ENOMEM if the get_user_pages returned by getting a SIGKILL
   signal.  Considering the general convention for a system call
   interrupted by a signal is ERESTARTNOSYS, so the current return value
   is consistant to that.

Lee:

An unfortunate side effect of "make-get_user_pages-interruptible" is that
it prevents a SIGKILL'd task from munlock-ing pages that it had mlocked,
resulting in freeing of mlocked pages.  Freeing of mlocked pages, in
itself, is not so bad.  We just count them now--altho' I had hoped to
remove this stat and add PG_MLOCKED to the free pages flags check.

However, consider pages in shared libraries mapped by more than one task
that a task mlocked--e.g., via mlockall().  If the task that mlocked the
pages exits via SIGKILL, these pages would be left mlocked and
unevictable.

Proposed fix:

Add another GUP flag to ignore sigkill when calling get_user_pages from
munlock()--similar to Kosaki Motohiro's 'IGNORE_VMA_PERMISSIONS flag for
the same purpose.  We are not actually allocating memory in this case,
which "make-get_user_pages-interruptible" intends to avoid.  We're just
munlocking pages that are already resident and mapped, and we're reusing
get_user_pages() to access those pages.

??  Maybe we should combine 'IGNORE_VMA_PERMISSIONS and '_IGNORE_SIGKILL
into a single flag: GUP_FLAGS_MUNLOCK ???

[Lee.Schermerhorn@hp.com: ignore sigkill in get_user_pages during munlock]
Signed-off-by: Paul Menage <menage@google.com>
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:08 -08:00
Hugh Dickins 1e9e63650d badpage: KERN_ALERT BUG instead of KERN_EMERG
bad_page() and rmap Eeek messages have said KERN_EMERG for a few years,
which I've followed in print_bad_pte().  These are serious system errors,
on a par with BUGs, but they're not quite emergencies, and we do our best
to carry on: say KERN_ALERT "BUG: " like the x86 oops does.

And remove the "Trying to fix it up, but a reboot is needed" line: it's
not untrue, but I hope the KERN_ALERT "BUG: " conveys as much.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:08 -08:00
Hugh Dickins d936cf9b39 badpage: ratelimit print_bad_pte and bad_page
print_bad_pte() and bad_page() might each need ratelimiting - especially
for their dump_stacks, almost never of interest, yet not quite
dispensible.  Correlating corruption across neighbouring entries can be
very helpful, so allow a burst of 60 reports before keeping quiet for the
remainder of that minute (or allow a steady drip of one report per
second).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
Hugh Dickins edc315fd22 badpage: remove vma from page_remove_rmap
Remove page_remove_rmap()'s vma arg, which was only for the Eeek message.
And remove the BUG_ON(page_mapcount(page) == 0) from CONFIG_DEBUG_VM's
page_dup_rmap(): we're trying to be more resilient about that than BUGs.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
Hugh Dickins 2509ef26db badpage: zap print_bad_pte on swap and file
Complete zap_pte_range()'s coverage of bad pagetable entries by calling
print_bad_pte() on a pte_file in a linear vma and on a bad swap entry.
That needs free_swap_and_cache() to tell it, which will also have shown
one of those "swap_free" errors (but with much less information).

Similar checks in fork's copy_one_pte()?  No, that would be more noisy
than helpful: we'll see them when parent and child exec or exit.

Where do_nonlinear_fault() calls print_bad_pte(): omit !VM_CAN_NONLINEAR
case, that could only be a bug in sys_remap_file_pages(), not a bad pte.
VM_FAULT_OOM rather than VM_FAULT_SIGBUS?  Well, okay, that is consistent
with what happens if do_swap_page() operates a bad swap entry; but don't
we have patches to be more careful about killing when VM_FAULT_OOM?

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
Hugh Dickins 22b31eec63 badpage: vm_normal_page use print_bad_pte
print_bad_pte() is so far being called only when zap_pte_range() finds
negative page_mapcount, or there's a fault on a pte_file where it does not
belong.  That's weak coverage when we suspect pagetable corruption.

Originally, it was called when vm_normal_page() found an invalid pfn: but
pfn_valid is expensive on some architectures and configurations, so 2.6.24
put that under CONFIG_DEBUG_VM (which doesn't help in the field), then
2.6.26 replaced it by a VM_BUG_ON (likewise).

Reinstate the print_bad_pte() in vm_normal_page(), but use a cheaper test
than pfn_valid(): memmap_init_zone() (used in bootup and hotplug) keep a
__read_mostly note of the highest_memmap_pfn, vm_normal_page() then check
pfn against that.  We could call this pfn_plausible() or pfn_sane(), but I
doubt we'll need it elsewhere: of course it's not reliable, but gives much
stronger pagetable validation on many boxes.

Also use print_bad_pte() when the pte_special bit is found outside a
VM_PFNMAP or VM_MIXEDMAP area, instead of VM_BUG_ON.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
Hugh Dickins 3dc147414c badpage: replace page_remove_rmap Eeek and BUG
Now that bad pages are kept out of circulation, there is no need for the
infamous page_remove_rmap() BUG() - once that page is freed, its negative
mapcount will issue a "Bad page state" message and the page won't be
freed.  Removing the BUG() allows more info, on subsequent pages, to be
gathered.

We do have more info about the page at this point than bad_page() can know
- notably, what the pmd is, which might pinpoint something like low 64kB
corruption - but page_remove_rmap() isn't given the address to find that.

In practice, there is only one call to page_remove_rmap() which has ever
reported anything, that from zap_pte_range() (usually on exit, sometimes
on munmap).  It has all the info, so remove page_remove_rmap()'s "Eeek"
message and leave it all to zap_pte_range().

mm/memory.c already has a hardly used print_bad_pte() function, showing
some of the appropriate info: extend it to show what we want for the rmap
case: pte info, page info (when there is a page) and vma info to compare.
zap_pte_range() already knows the pmd, but print_bad_pte() is easier to
use if it works that out for itself.

Some of this info is also shown in bad_page()'s "Bad page state" message.
Keep them separate, but adjust them to match each other as far as
possible.  Say "Bad page map" in print_bad_pte(), and add a TAINT_BAD_PAGE
there too.

print_bad_pte() show current->comm unconditionally (though it should get
repeated in the usually irrelevant stack trace): sorry, I misled Nick
Piggin to make it conditional on vm_mm == current->mm, but current->mm is
already NULL in the exit case.  Usually current->comm is good, though
exceptionally it may not be that of the mm (when "swapoff" for example).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
KOSAKI Motohiro 2bc7273b0e mm: make maddr __iomem
sparse output following warnings.

mm/memory.c:2936:8: warning: incorrect type in assignment (different address spaces)
mm/memory.c:2936:8:    expected void *maddr
mm/memory.c:2936:8:    got void [noderef] <asn:2>

cleanup here.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:04 -08:00
Hugh Dickins a2c43eed83 mm: try_to_free_swap replaces remove_exclusive_swap_page
remove_exclusive_swap_page(): its problem is in living up to its name.

It doesn't matter if someone else has a reference to the page (raised
page_count); it doesn't matter if the page is mapped into userspace
(raised page_mapcount - though that hints it may be worth keeping the
swap): all that matters is that there be no more references to the swap
(and no writeback in progress).

swapoff (try_to_unuse) has been removing pages from swapcache for years,
with no concern for page count or page mapcount, and we used to have a
comment in lookup_swap_cache() recognizing that: if you go for a page of
swapcache, you'll get the right page, but it could have been removed from
swapcache by the time you get page lock.

So, give up asking for exclusivity: get rid of
remove_exclusive_swap_page(), and remove_exclusive_swap_page_ref() and
remove_exclusive_swap_page_count() which were spawned for the recent LRU
work: replace them by the simpler try_to_free_swap() which just checks
page_swapcount().

Similarly, remove the page_count limitation from free_swap_and_count(),
but assume that it's worth holding on to the swap if page is mapped and
swap nowhere near full.  Add a vm_swap_full() test in free_swap_cache()?
It would be consistent, but I think we probably have enough for now.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:03 -08:00
Hugh Dickins 7b1fe59793 mm: reuse_swap_page replaces can_share_swap_page
A good place to free up old swap is where do_wp_page(), or do_swap_page(),
is about to redirty the page: the data on disk is then stale and won't be
read again; and if we do decide to write the page out later, using the
previous swap location makes an unnecessary disk seek very likely.

So give can_share_swap_page() the side-effect of delete_from_swap_cache()
when it safely can.  And can_share_swap_page() was always a misleading
name, the more so if it has a side-effect: rename it reuse_swap_page().

Irrelevant cleanup nearby: remove swap_token_default_timeout definition
from swap.h: it's used nowhere.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:03 -08:00
Hugh Dickins ab967d8601 mm: wp lock page before deciding cow
An application may rely on get_user_pages() to give it pages writable from
userspace and shared with a driver, GUP breaking COW if necessary.  It may
mprotect() the pages' writability, off and on, from time to time.

Normally this works fine (so long as the app does not fork); but just
occasionally, under memory pressure, a readonly pte in a newly writable
area is COWed unnecessarily, breaking the link with the driver: because
do_wp_page() does trylock_page, and falls back to COW whenever that fails.

For reliable behaviour in the unshared case, when the trylock_page fails,
now unlock pagetable, lock page and relock pagetable, before deciding
whether Copy-On-Write is really necessary.

Reported-by: Zhou Yingchao
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:03 -08:00
Hugh Dickins 878b63ac88 mm: gup persist for write permission
do_wp_page()'s VM_FAULT_WRITE return value tells __get_user_pages() that
COW has been done if necessary, though it may be leaving the pte without
write permission - for the odd case of forced writing to a readonly vma
for ptrace.  At present GUP then retries the follow_page() without asking
for write permission, to escape an endless loop when forced.

But an application may be relying on GUP to guarantee a writable page
which won't be COWed again when written from userspace, whereas a race
here might leave a readonly pte in place?  Change the VM_FAULT_WRITE
handling to ask follow_page() for write permission again, except in that
odd case of forced writing to a readonly vma.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:03 -08:00
Hugh Dickins cbf84b7add mm: further cleanup page_add_new_anon_rmap
Moving lru_cache_add_active_or_unevictable() into page_add_new_anon_rmap()
was good but stupid: we can and should SetPageSwapBacked() there too; and
we know for sure that this anonymous, swap-backed page is not file cache.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:02 -08:00
Hugh Dickins b5934c5318 mm: add_active_or_unevictable into rmap
lru_cache_add_active_or_unevictable() and page_add_new_anon_rmap() always
appear together.  Save some symbol table space and some jumping around by
removing lru_cache_add_active_or_unevictable(), folding its code into
page_add_new_anon_rmap(): like how we add file pages to lru just after
adding them to page cache.

Remove the nearby "TODO: is this safe?" comments (yes, it is safe), and
change page_add_new_anon_rmap()'s address BUG_ON to VM_BUG_ON as
originally intended.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:02 -08:00
Jeremy Fitzhardinge 38e0edb15b mm/apply_to_range: call pte function with lazy updates
Make the pte-level function in apply_to_range be called in lazy mmu mode,
so that any pagetable modifications can be batched.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:01 -08:00
Johannes Weiner 4917e5d049 mm: more likely reclaim MADV_SEQUENTIAL mappings
File pages mapped only in sequentially read mappings are perfect reclaim
canditates.

This patch makes these mappings behave like weak references, their pages
will be reclaimed unless they have a strong reference from a normal
mapping as well.

It changes the reclaim and the unmap path where they check if the page has
been referenced.  In both cases, accesses through sequentially read
mappings will be ignored.

Benchmark results from KOSAKI Motohiro:

    http://marc.info/?l=linux-mm&m=122485301925098&w=2

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:00 -08:00
Nick Piggin bf3f3bc5e7 mm: don't mark_page_accessed in fault path
Doing a mark_page_accessed at fault-time, then doing SetPageReferenced at
unmap-time if the pte is young has a number of problems.

mark_page_accessed is supposed to be roughly the equivalent of a young pte
for unmapped references. Unfortunately it doesn't come with any context:
after being called, reclaim doesn't know who or why the page was touched.

So calling mark_page_accessed not only adds extra lru or PG_referenced
manipulations for pages that are already going to have pte_young ptes anyway,
but it also adds these references which are difficult to work with from the
context of vma specific references (eg. MADV_SEQUENTIAL pte_young may not
wish to contribute to the page being referenced).

Then, simply doing SetPageReferenced when zapping a pte and finding it is
young, is not a really good solution either. SetPageReferenced does not
correctly promote the page to the active list for example. So after removing
mark_page_accessed from the fault path, several mmap()+touch+munmap() would
have a very different result from several read(2) calls for example, which
is not really desirable.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:58:58 -08:00
Al Viro acfa4380ef inode->i_op is never NULL
We used to have rather schizophrenic set of checks for NULL ->i_op even
though it had been eliminated years ago.  You'd need to go out of your
way to set it to NULL explicitly _and_ a bunch of code would die on
such inodes anyway.  After killing two remaining places that still
did that bogosity, all that crap can go away.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05 11:54:28 -05:00
Linus Torvalds 5f34fe1cfc Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.
2008-12-30 16:10:19 -08:00
venkatesh.pallipadi@intel.com 34801ba9bf x86: PAT: move track untrack pfnmap stubs to asm-generic
Impact: Cleanup and branch hints only.

Move the track and untrack pfn stub routines from memory.c to asm-generic.
Also add unlikely to pfnmap related calls in fork and exit path.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-19 15:40:30 -08:00
venkatesh.pallipadi@intel.com 982d789ab7 x86: PAT: remove follow_pfnmap_pte in favor of follow_phys
Impact: Cleanup - removes a new function in favor of a recently modified older one.

Replace follow_pfnmap_pte in pat code with follow_phys. follow_phys lso
returns protection eliminating the need of pte_pgprot call. Using follow_phys
also eliminates the need for pte_pa.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-19 15:40:30 -08:00
venkatesh.pallipadi@intel.com d87fe6607c x86: PAT: modify follow_phys to return phys_addr prot and return value
Impact: Changes and globalizes an existing static interface.

Follow_phys does similar things as follow_pfnmap_pte. Make a minor change
to follow_phys so that it can be used in place of follow_pfnmap_pte.
Physical address return value with 0 as error return does not work in
follow_phys as the actual physical address 0 mapping may exist in pte.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-19 15:40:30 -08:00
venkatesh.pallipadi@intel.com 2ab640379a x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3
Impact: Introduces new hooks, which are currently null.

Introduce generic hooks in remap_pfn_range and vm_insert_pfn and
corresponding copy and free routines with reserve and free tracking.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-18 13:30:15 -08:00
venkatesh.pallipadi@intel.com e121e41844 x86: PAT: add follow_pfnmp_pte routine to help tracking pfnmap pages - v3
Impact: New currently unused interface.

Add a generic interface to follow pfn in a pfnmap vma range. This is used by
one of the subsequent x86 PAT related patch to keep track of memory types
for vma regions across vma copy and free.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-18 13:30:15 -08:00
venkatesh.pallipadi@intel.com 3c8bb73ace x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3
Impact: Code transformation, new functions added should have no effect.

Drivers use mmap followed by pgprot_* and remap_pfn_range or vm_insert_pfn,
in order to export reserved memory to userspace. Currently, such mappings are
not tracked and hence not kept consistent with other mappings (/dev/mem,
pci resource, ioremap) for the sme memory, that may exist in the system.

The following patchset adds x86 PAT attribute tracking and untracking for
pfnmap related APIs.

First three patches in the patchset are changing the generic mm code to fit
in this tracking. Last four patches are x86 specific to make things work
with x86 PAT code. The patchset aso introduces pgprot_writecombine interface,
which gives writecombine mapping when enabled, falling back to
pgprot_noncached otherwise.

This patch:

While working on x86 PAT, we faced some hurdles with trackking
remap_pfn_range() regions, as we do not have any information to say
whether that PFNMAP mapping is linear for the entire vma range or
it is smaller granularity regions within the vma.

A simple solution to this is to use vm_pgoff as an indicator for
linear mapping over the vma region. Currently, remap_pfn_range
only sets vm_pgoff for COW mappings. Below patch changes the
logic and sets the vm_pgoff irrespective of COW. This will still not
be enough for the case where pfn is zero (vma region mapped to
physical address zero). But, for all the other cases, we can look at
pfnmap VMAs and say whether the mappng is for the entire vma region
or not.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-18 13:30:15 -08:00
Ingo Molnar d1a76187a5 Merge commit 'v2.6.28-rc2' into core/locking
Conflicts:
	arch/um/include/asm/system.h
2008-10-28 16:54:49 +01:00
Huang Weiyi a50c22eed5 mm: remove duplicated #include's
Removed duplicated #include <linux/vmalloc.h> in mm/vmalloc.c and
"internal.h" in mm/memory.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 16:17:42 -07:00
KAMEZAWA Hiroyuki 5b4e655e94 memcg: avoid accounting special pages
There are not-on-LRU pages which can be mapped and they are not worth to
be accounted.  (becasue we can't shrink them and need dirty codes to
handle specical case) We'd like to make use of usual objrmap/radix-tree's
protcol and don't want to account out-of-vm's control pages.

When special_mapping_fault() is called, page->mapping is tend to be NULL
and it's charged as Anonymous page.  insert_page() also handles some
special pages from drivers.

This patch is for avoiding to account special pages.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
KAMEZAWA Hiroyuki 073e587ec2 memcg: move charge swapin under lock
While page-cache's charge/uncharge is done under page_lock(), swap-cache
isn't.  (anonymous page is charged when it's newly allocated.)

This patch moves do_swap_page()'s charge() call under lock.  I don't see
any bad problem *now* but this fix will be good for future for avoiding
unnecessary racy state.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
Lee Schermerhorn 9978ad583e mlock: make mlock error return Posixly Correct
Rework Posix error return for mlock().

Posix requires error code for mlock*() system calls for some conditions
that differ from what kernel low level functions, such as
get_user_pages(), return for those conditions.  For more info, see:

http://marc.info/?l=linux-kernel&m=121750892930775&w=2

This patch provides the same translation of get_user_pages()
error codes to posix specified error codes in the context
of the mlock rework for unevictable lru.

[akpm@linux-foundation.org: fix build]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:31 -07:00
Lee Schermerhorn c11d69d8c8 mlock: revert mainline handling of mlock error return
This change is intended to make mlock() error returns correct.
make_page_present() is a lower level function used by more than mlock().
Subsequent patch[es] will add this error return fixup in an mlock specific
path.

Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:31 -07:00
Lee Schermerhorn 64d6519dda swap: cull unevictable pages in fault path
In the fault paths that install new anonymous pages, check whether the
page is evictable or not using lru_cache_add_active_or_unevictable().  If
the page is evictable, just add it to the active lru list [via the pagevec
cache], else add it to the unevictable list.

This "proactive" culling in the fault path mimics the handling of mlocked
pages in Nick Piggin's series to keep mlocked pages off the lru lists.

Notes:

1) This patch is optional--e.g., if one is concerned about the
   additional test in the fault path.  We can defer the moving of
   nonreclaimable pages until when vmscan [shrink_*_list()]
   encounters them.  Vmscan will only need to handle such pages
   once, but if there are a lot of them it could impact system
   performance.

2) The 'vma' argument to page_evictable() is require to notice that
   we're faulting a page into an mlock()ed vma w/o having to scan the
   page's rmap in the fault path.   Culling mlock()ed anon pages is
   currently the only reason for this patch.

3) We can't cull swap pages in read_swap_cache_async() because the
   vma argument doesn't necessarily correspond to the swap cache
   offset passed in by swapin_readahead().  This could [did!] result
   in mlocking pages in non-VM_LOCKED vmas if [when] we tried to
   cull in this path.

4) Move set_pte_at() to after where we add page to lru to keep it
   hidden from other tasks that might walk the page table.
   We already do it in this order in do_anonymous() page.  And,
   these are COW'd anon pages.  Is this safe?

[riel@redhat.com: undo an overzealous code cleanup]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:31 -07:00
Nick Piggin b291f00039 mlock: mlocked pages are unevictable
Make sure that mlocked pages also live on the unevictable LRU, so kswapd
will not scan them over and over again.

This is achieved through various strategies:

1) add yet another page flag--PG_mlocked--to indicate that
   the page is locked for efficient testing in vmscan and,
   optionally, fault path.  This allows early culling of
   unevictable pages, preventing them from getting to
   page_referenced()/try_to_unmap().  Also allows separate
   accounting of mlock'd pages, as Nick's original patch
   did.

   Note:  Nick's original mlock patch used a PG_mlocked
   flag.  I had removed this in favor of the PG_unevictable
   flag + an mlock_count [new page struct member].  I
   restored the PG_mlocked flag to eliminate the new
   count field.

2) add the mlock/unevictable infrastructure to mm/mlock.c,
   with internal APIs in mm/internal.h.  This is a rework
   of Nick's original patch to these files, taking into
   account that mlocked pages are now kept on unevictable
   LRU list.

3) update vmscan.c:page_evictable() to check PageMlocked()
   and, if vma passed in, the vm_flags.  Note that the vma
   will only be passed in for new pages in the fault path;
   and then only if the "cull unevictable pages in fault
   path" patch is included.

4) add try_to_unlock() to rmap.c to walk a page's rmap and
   ClearPageMlocked() if no other vmas have it mlocked.
   Reuses as much of try_to_unmap() as possible.  This
   effectively replaces the use of one of the lru list links
   as an mlock count.  If this mechanism let's pages in mlocked
   vmas leak through w/o PG_mlocked set [I don't know that it
   does], we should catch them later in try_to_unmap().  One
   hopes this will be rare, as it will be relatively expensive.

Original mm/internal.h, mm/rmap.c and mm/mlock.c changes:
Signed-off-by: Nick Piggin <npiggin@suse.de>

splitlru: introduce __get_user_pages():

  New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS.
  because current get_user_pages() can't grab PROT_NONE pages theresore it
  cause PROT_NONE pages can't munlock.

[akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch]
[akpm@linux-foundation.org: untangle patch interdependencies]
[akpm@linux-foundation.org: fix things after out-of-order merging]
[hugh@veritas.com: fix page-flags mess]
[lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm']
[kosaki.motohiro@jp.fujitsu.com: build fix]
[kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments]
[kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:30 -07:00
Rik van Riel 4f98a2fee8 vmscan: split LRU lists into anon & file sets
Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon").  The latter includes tmpfs.

The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.

This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists.  The big
policy changes are in separate patches.

[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
Rik van Riel b2e185384f define page_file_cache() function
Define page_file_cache() function to answer the question:
	is page backed by a file?

Originally part of Rik van Riel's split-lru patch.  Extracted to make
available for other, independent reclaim patches.

Moved inline function to linux/mm_inline.h where it will be needed by
subsequent "split LRU" and "noreclaim" patches.

Unfortunately this needs to use a page flag, since the PG_swapbacked state
needs to be preserved all the way to the point where the page is last
removed from the LRU.  Trying to derive the status from other info in the
page resulted in wrong VM statistics in earlier split VM patchsets.

The total number of page flags in use on a 32 bit machine after this patch
is 19.

[akpm@linux-foundation.org: fix up out-of-order merge fallout]
[hugh@veritas.com: splitlru: shmem_getpage SetPageSwapBacked sooner[
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
Nick Piggin 3ee1afa308 x86: some lock annotations for user copy paths, v2
- introduce might_fault()
 - handle the atomic user copy paths correctly

[ mingo@elte.hu: move might_sleep() outside of in_atomic(). ]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-11 09:44:21 +02:00