Commit Graph

240 Commits

Author SHA1 Message Date
Linus Torvalds e317234975 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...
2012-03-23 14:39:09 -07:00
Linus Torvalds 7bfe0e66d5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "- we finally merged driver for USB version of Synaptics touchpads
    (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);

   - a bunch of new drivers for embedded platforms (Cypress
     touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
     touchscreens, TI touchscreen);

   - input core allows clients to specify desired clock source for
     timestamps on input events (EVIOCSCLOCKID ioctl);

   - input core allows querying state of all MT slots for given event
     code via EVIOCGMTSLOTS ioctl;

   - various driver fixes and improvements."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: ili210x - add support for Ilitek ILI210x based touchscreens
  Input: altera_ps2 - use of_match_ptr()
  Input: synaptics_usb - switch to module_usb_driver()
  Input: convert I2C drivers to use module_i2c_driver()
  Input: convert SPI drivers to use module_spi_driver()
  Input: omap4-keypad - move platform_data to <linux/platform_data>
  Input: kxtj9 - who_am_i check value and initial data rate fixes
  Input: add driver support for MAX8997-haptic
  Input: tegra-kbc - revise device tree support
  Input: of_keymap - add device tree bindings for simple key matrices
  Input: wacom - fix physical size calculation for 3rd-gen Bamboo
  Input: twl4030-vibra - really switch from #if to #ifdef
  Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
  Input: max8925_onkey - avoid accessing input device too early
  Input: max8925_onkey - allow to be used as a wakeup source
  Input: atmel-wm97xx - convert to dev_pm_ops
  Input: atmel-wm97xx - set driver owner
  Input: add cyttsp touchscreen maintainer entry
  Input: cyttsp - remove useless checks in cyttsp_probe()
  Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
  ...
2012-03-22 20:20:18 -07:00
Jiri Kosina 4a247a4119 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/Makefile
2012-03-20 13:18:05 +01:00
Andreas Nielsen 4d5df5d11e HID: multitouch: add PID for Fructel product
Adds multitouch support for the Gametel Android game controller.

The multitouch events are emulated by the Gametel device. Each physical button
is configured to generate a MT event on a specific coordinate. This seems to be
the only way for us to support Android games that doesn't support HID gamepads.
It is possible to inject MT events at Android level, but this requires root on
the phone.

Signed-off-by: Andreas Nielsen <eas@svep.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-20 13:17:22 +01:00
Jiri Kosina 3abee3526d Merge branches 'battery-scope', 'logitech' and 'multitouch' into for-linus 2012-03-20 13:04:25 +01:00
Mauro Carvalho Chehab 9ce28d827f Merge tag 'v3.3' into staging/for_v3.4
* tag 'v3.3': (1646 commits)
  Linux 3.3
  Don't limit non-nested epoll paths
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]
  afs: Remote abort can cause BUG in rxrpc code
  afs: Read of file returns EBADMSG
  C6X: remove dead code from entry.S
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()
  MAINTAINERS: Add Serge as maintainer of capabilities
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  ...
2012-03-19 13:41:24 -03:00
Jiri Kosina 740363fb75 HID: tivo: add support for BT-version (0x1200)
Add support for BT-driven configuration of the TiVo remote.

Reported-by: Joshua Dillon <jvdillon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-13 09:36:05 +01:00
Dmitry Torokhov b675b3667f Merge commit 'v3.3-rc6' into next 2012-03-09 10:55:17 -08:00
Benjamin Tissoires 2ce09df47b HID: multitouch: add support for eGalax 0x722a
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-09 13:27:53 +01:00
Benjamin Tissoires fd1d152583 HID: multitouch: add more eGalax devices
This is a list of devices that should be handled by hid-multitouch.  They all
present the HID usage "Contact ID" and won't be handled by hid-input.  Some of
them have _not_ been tested (though I have their report descriptors), but I've
been guaranted by eeti that they follow the same protocol.  The tested ones are
also blacklisted in hid-core.c.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:24 +01:00
Benjamin Tissoires 71078b0deb HID: multitouch: add new PID from Ideacom
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:24 +01:00
Benjamin Tissoires 841cb1570d HID: multitouch: add support for Atmel maXTouch 03eb:2118
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:24 +01:00
Nikolai Kondrashov a786e83cb0 HID: waltop: Add support for tablet with PID 0038
Add support for unknown Waltop tablet with product ID 0x0038.
This tablet is sold as Genius G-Pen F509.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 11:20:55 +01:00
Nikolai Kondrashov 22ca20b250 HID: kye: Add support for 3 tablets
Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X.
Update Kconfig entry accordingly, remove EXPERT dependency.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-28 13:37:12 +01:00
Alan Stern 37891abc84 HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed
by AIREN.  This keyboard seems to have a lot of bugs; NOGET works
around only one of them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: okias <d.okias@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27 17:35:43 +01:00
Jiri Kosina c7fd7937ba HID: correct PID for saitek PS1000
Reported-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-22 18:33:43 +01:00
Andreas Hübner 1e93674a8e HID: add new driver for non-compliant Saitek devices
The driver currently only supports the PS1000 controller.
It fixes the report descriptor by removing a non-existing axis and
clearing the constant bit on the d-pad and button input reports.

Signed-off-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-22 11:30:17 +01:00
Sean Young 42fc04e5f8 HID: sjoy: Add device ID for Super Joy Box 3
Also correct the quirks for the Super Joy Box 3 Pro and Super Dual Box.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 14:16:36 +01:00
Ville Ranki 724ed328a1 HID: Add quirk for CH Products Fighterstick
CH Fighterstick requires HID_QUIRK_NOGET as many other CH devices do. This
patch adds device id for Fighterstick and adds necessary line to HID quirk
list.

Signed-off-by: Ville Ranki <ville.ranki@iki.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:58:29 +01:00
Denis Kovalev 2258e863b4 HID: multitouch: add support of Panasonic multitouch panels
While at it, also fix some minor codingstyle issues.

Signed-off-by: Denis Kovalev <Denis.Kovalev@dataart.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:55:45 +01:00
Hans Verkuil 65dd3b699f [media] hid-core: ignore the Keene FM transmitter
The Keene FM transmitter USB device has the same USB ID as
the Logitech AudioHub Speaker, but it should ignore the hid.
Check if the name is that of the Keene device.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 16:40:00 -02:00
Nikolai Kondrashov 4fdc18d151 HID: waltop: Add support for Waltop Q Pad
Add support for Waltop Q Pad by fixing its report descriptor.

This tablet is also sold as Aiptek HyperPen Mini. Other possible names
include: NGS Flexi Style, VisTablet PenPad, iVistaTablet Q Flex Pad, Bravod
Q-PD65-S.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-07 13:51:53 +01:00
Jarod Wilson 44ea35c138 HID: add support for tivo slide remote
This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:35:03 +01:00
Benjamin Tissoires 847672cd14 HID: multitouch: support Perixx PERIPAD 701
Perixx Peripad 701 is an hybrid device which presents a touchpad and
a keyboard on the same surface. The switch between the two is controlled
by a physical switch, and the firmware sends the events on the right
interface (mouse, keyboard or multitouch).
This patch enables the multitouch interface of this device to work.

We need to manually set the device as a trackpad (we cannot infer it
from the reports descriptors as the device works under Windows, a system
that does not allow multitouch touchpad).
We also need to set the hid feature MAX CONTACT NUMBER to 2 or the device
stops sending events once it has been pressed by two touches.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 13:22:39 +01:00
Jan Steinhoff 8491ee1093 Input: add Synaptics USB device driver
This patch adds a driver for Synaptics USB touchpad or pointing stick
devices. These USB devices emulate an USB mouse by default, so one can
also use the usbhid driver. However, in combination with special user
space drivers this kernel driver allows one to customize the behaviour
of the device.

An extended version of this driver with support for the cPad background
display can be found at
<http://jan-steinhoff.de/linux/synaptics-usb.html>.

Signed-off-by: Jan Steinhoff <mail@jan-steinhoff.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-03 00:25:03 -08:00
Keng-Yu Lin 3596bb929f HID: add extra hotkeys in Asus AIO keyboards
The Asus All-In-One PC has a wireless keyboard with wifi toggle,
brightness up, brightness down and display off hotkeys.

This patch adds suppoort for these hotkeys.

Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-02 10:31:26 +01:00
Jiri Kosina 420174afdc Merge branch 'hid-battery' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into for-linus 2012-01-09 11:24:59 +01:00
Jeremy Fitzhardinge 652aa6a9ac hid-input/battery: add FEATURE quirk
Apple keyboards require a FEATURE report to query the battery state,
even though they list as an input.  Without this, it returns an error.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:31:25 +11:00
Jiri Kosina e027372856 Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', 'upstream-fixes', 'wacom' and 'wiimote' into for-linus 2012-01-05 15:51:02 +01:00
Masatoshi Hoshikawa 11576c6114 HID: hid-multitouch: add support 9 new Xiroku devices
This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.).

Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-05 15:49:21 +01:00
Benjamin Tissoires c4fad877cd HID: multitouch: add support for 3M 32"
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 11:10:56 +01:00
Benjamin Tissoires b105712469 HID: multitouch: add support of Atmel multitouch panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 11:10:36 +01:00
Aaron Tian b7ea95ff9b HID: multitouch: support PixArt optical touch screen
This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]

Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15 11:13:41 +01:00
Stefan Achatz d41c2a7011 HID: roccat: Add support for Isku keyboard
This patch adds support for Roccat Isku keyboard.
Userland tools can be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-06 10:21:10 +01:00
Benjamin Tissoires 545803651d HID: hid-multitouch: add support for new Hanvon panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30 15:38:23 +01:00
Benjamin Tissoires 5e7ea11f60 HID: multitouch: merge quanta driver into hid-multitouch
This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30 15:32:18 +01:00
Benjamin Tissoires b1807719f6 HID: Correct General touch PID
Genera Touch told us that 0001 is their single point device
and 0003 is the multitouch one. Apparently, we made the tests
someone having a prototype, and not the final product.
They said it should be safe to do the switch.

This partially reverts 5572da0 ("HID: hid-mulitouch: add support
for the 'Sensing Win7-TwoFinger'").

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:53:53 +01:00
Benjamin Tissoires 66f06127f3 HID: multitouch: add support for the MSI Windpad 110W
Just another eGalax device.
Please note that adding this device to have_special_driver
in hid-core.c is not required anymore.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:39 +01:00
Marek Vasut bb9ff21072 HID: multitouch: Add egalax ID for Acer Iconia W500
This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel
supports up to five fingers, therefore the need for a new addition of panel
types.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:39 +01:00
Benjamin Tissoires e36f690b37 HID: multitouch: cleanup with eGalax PID definitions
This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N}
to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax
devices.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:38 +01:00
Chris Bagwell 1fd8f04749 HID: hid-multitouch - add another eGalax id
This allows ASUS Eee Slate touchscreens to work.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:37 +01:00
Przemo Firszt 78761ff9bc HID: wacom: Initial driver for Wacom Intuos4 Wireless (Bluetooth)
This is very basic driver for Wacom Intuos4 Wireless tablet. It supports only
position, pressure and pen buttons. More features will be added in the future.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-13 21:32:52 +01:00
Andreas Krist ad734bc156 HID: hid-apple: add device ID of another wireless aluminium
I've recently bought a Apple wireless aluminum keyboard (model 2011) which is
not yet supported by the kernel - it seems they just changed the device id.
After applying the attached patch, the device is fully functional.

Signed-off-by: Andreas Krist <andreas.krist@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-28 18:54:56 +02:00
Gökçen Eraslan 213f9da805 HID: Add device IDs for Macbook Pro 8 keyboards
This patch adds keyboard support for Macbook Pro 8 models which has
WELLSPRING5A model name and 0x0252, 0x0253 and 0x0254 USB IDs. Trackpad
support for those models are added to bcm5974 in
c331eb580a ("Input: bcm5974 - Add
support for newer MacBookPro8,2).

Signed-off-by: Gökçen Eraslan <gokcen@pardus.org.tr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-28 17:42:49 +02:00
Jiri Kosina b3aec7b686 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/hid-core.c
	drivers/hid/hid-ids.h
2011-10-25 09:59:04 +02:00
Jiri Kosina b0eae38ceb Merge branches 'acrux', 'logitech', 'multitouch', 'roccat' and 'wiimote' into for-linus 2011-10-25 09:54:16 +02:00
Sean Young 1bcc20675a HID: Add device IDs for more SJOY adapters
Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro
and Super Joy Box 5 Pro. These models have support for pressure
sensitive buttons and they can force the controller to either digital
or analog mode, both of which are not supported yet.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-21 01:01:45 +02:00
Terry Lambert f6a04605f3 HID: support primax keyboards violating USB HID spec
Primax keyboards with the issue this driver addresses report modifier
keys as in band key events instead of as out of band modifier bits,
resulting in the modifier keys generating key up events immediately
before the keys they are intended to modify.  This driver rewrites
the raw report data from such keyboards into USB HID 1.11 compliant
report data.  It only matches the USB vendor and product IDs for the
keyboard it has been tested on. Since there are several keyboards,
notably a number of laptops and folding USB keyboards known to have
similar unresolved problem reports, the list is expected to grow.

Signed-off-by: Terry Lambert <tlambert@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-17 17:04:41 +02:00
Nobuhiro Iwamatsu d762cc290b HID: Add support MacbookAir 4,1 keyboard
Added USB device IDs and keyboard map for MacBookAir 4,1 keyboard.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-03 14:00:05 +02:00
Stephane Chatty a062cc5a76 HID: hid-multitouch: add support for the IDEACOM 6650 chip
The IDEACOM 6650 multitouch chip, present in various all-in-one computers,
uses the serial version of the HID multitouch protocol. No existing class
supports this.

In principle, the new MT_CLS_SERIAL should work for other
serial panels as well, perhaps including some eGalax panels.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-20 15:14:30 +02:00