Commit Graph

515 Commits

Author SHA1 Message Date
Linus Torvalds 4c84a39c8a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits)
  IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
  IB/mthca: Make all device methods truly reentrant
  IB/mthca: Fix memory leak on modify_qp error paths
  IB/uverbs: Factor out common idr code
  IB/uverbs: Don't decrement usecnt on error paths
  IB/uverbs: Release lock on error path
  IB/cm: Use address handle helpers
  IB/sa: Add ib_init_ah_from_path()
  IB: Add ib_init_ah_from_wc()
  IB/ucm: Get rid of duplicate P_Key parameter
  IB/srp: Factor out common request reset code
  IB/srp: Support SRP rev. 10 targets
  [SCSI] srp.h: Add I/O Class values
  IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
  IB/mthca: Fill in max_map_per_fmr device attribute
  IB/ipath: Add client reregister event generation
  IB/mthca: Add client reregister event generation
  IB: Move struct port_info from ipath to <rdma/ib_smi.h>
  IPoIB: Handle client reregister events
  IB: Add client reregister event type
  ...
2006-06-19 19:01:59 -07:00
Herbert Xu 932ff279a4 [NET]: Add netif_tx_lock
Various drivers use xmit_lock internally to synchronise with their
transmission routines.  They do so without setting xmit_lock_owner.
This is fine as long as netpoll is not in use.

With netpoll it is possible for deadlocks to occur if xmit_lock_owner
isn't set.  This is because if a printk occurs while xmit_lock is held
and xmit_lock_owner is not set can cause netpoll to attempt to take
xmit_lock recursively.

While it is possible to resolve this by getting netpoll to use
trylock, it is suboptimal because netpoll's sole objective is to
maximise the chance of getting the printk out on the wire.  So
delaying or dropping the message is to be avoided as much as possible.

So the only alternative is to always set xmit_lock_owner.  The
following patch does this by introducing the netif_tx_lock family of
functions that take care of setting/unsetting xmit_lock_owner.

I renamed xmit_lock to _xmit_lock to indicate that it should not be
used directly.  I didn't provide irq versions of the netif_tx_lock
functions since xmit_lock is meant to be a BH-disabling lock.

This is pretty much a straight text substitution except for a small
bug fix in winbond.  It currently uses
netif_stop_queue/spin_unlock_wait to stop transmission.  This is
unsafe as an IRQ can potentially wake up the queue.  So it is safer to
use netif_tx_disable.

The hamradio bits used spin_lock_irq but it is unnecessary as
xmit_lock must never be taken in an IRQ handler.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:30:14 -07:00
Roland Dreier 9ead190bfd IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
Currently, all userspace verbs operations that call into the kernel
are serialized by ib_uverbs_idr_mutex.  This can be a scalability
issue for some workloads, especially for devices driven by the ipath
driver, which needs to call into the kernel even for datapath
operations.

Fix this by adding reference counts to the userspace objects, and then
converting ib_uverbs_idr_mutex into a spinlock that only protects the
idrs long enough to take a reference on the object being looked up.
Because remove operations may fail, we have to do a slightly funky
two-step deletion, which is described in the comments at the top of
uverbs_cmd.c.

This also still leaves ib_uverbs_idr_lock as a single lock that is
possibly subject to contention.  However, the lock hold time will only
be a single idr operation, so multiple threads should still be able to
make progress, even if ib_uverbs_idr_lock is being ping-ponged.

Surprisingly, these changes even shrink the object code:

add/remove: 23/5 grow/shrink: 4/21 up/down: 633/-693 (-60)

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:44:49 -07:00
Roland Dreier c93b6fbaa9 IB/mthca: Make all device methods truly reentrant
Documentation/infiniband/core_locking.txt says:

  All of the methods in struct ib_device exported by a low-level
  driver must be fully reentrant.  The low-level driver is required to
  perform all synchronization necessary to maintain consistency, even
  if multiple function calls using the same object are run
  simultaneously.

However, mthca's modify_qp, modify_srq and resize_cq methods are
currently not reentrant.  Add a mutex to the QP, SRQ and CQ structures
so that these calls can be properly serialized.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:41 -07:00
Roland Dreier c9c5d9feef IB/mthca: Fix memory leak on modify_qp error paths
Some error paths after the mthca_alloc_mailbox() call in mthca_modify_qp()
just do a "return -EINVAL" without freeing the mailbox.  Convert these
returns to "goto out" to avoid leaking the mailbox storage.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:41 -07:00
Roland Dreier 3463175d6e IB/uverbs: Factor out common idr code
Factor out common code for adding a userspace object to an idr into a
function idr_add_uobj().  This shrinks both the source and object code:

add/remove: 1/0 grow/shrink: 0/6 up/down: 57/-220 (-163)
function                                     old     new   delta
idr_add_uobj                                   -      57     +57
ib_uverbs_create_ah                          543     512     -31
ib_uverbs_create_srq                         662     630     -32
ib_uverbs_reg_mr                             737     699     -38
ib_uverbs_create_cq                          639     600     -39
ib_uverbs_alloc_pd                           485     446     -39
ib_uverbs_create_qp                         1020     979     -41

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:40 -07:00
Roland Dreier 92b1582268 IB/uverbs: Don't decrement usecnt on error paths
In error paths when destroying an object, uverbs should not decrement
associated objects' usecnt, since ib_dereg_mr(), ib_destroy_qp(),
etc. already do that.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:40 -07:00
Ganapathi CH 77f76013e3 IB/uverbs: Release lock on error path
If ibdev->alloc_ucontext() fails then ib_uverbs_get_context() does not
unlock file->mutex before returning error.

Signed-off by: Ganapathi CH <cganapathi@novell.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:40 -07:00
Sean Hefty ca222c6b2c IB/cm: Use address handle helpers
Use new ib_init_ah_from_wc() and ib_init_ah_from_path() helper
functions to clean up the IB CM.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:40 -07:00
Sean Hefty 6d969a471b IB/sa: Add ib_init_ah_from_path()
Add a call to initialize address handle attributes given a path record.
This is used by the CM, and would be useful for users of UD QPs.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:39 -07:00
Sean Hefty 4e00d69454 IB: Add ib_init_ah_from_wc()
Add a function to initialize address handle attributes from a work
completion.  This functionality is duplicated by both verbs and the CM.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:39 -07:00
Sean Hefty 75af908851 IB/ucm: Get rid of duplicate P_Key parameter
The P_Key is provided into a SIDR REQ in two places, once as a
parameter, and again in the path record.  Remove the P_Key as a
parameter and always use the one given in the path record.

This change has no practical effect on ABI functionality.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:39 -07:00
Ishai Rabinovitz 526b4caa0a IB/srp: Factor out common request reset code
Misc cleanups in ib_srp:
1) I think that it is more efficient to move the req entries from req_list
   to free_list in srp_reconnect_target (rather than rebuild the free_list).
   (In any case this code is shorter).
2) This allows us to reuse code in srp_reset_device and srp_reconnect_target
   and call a new function srp_reset_req.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:38 -07:00
Ramachandra K 0c0450db31 IB/srp: Support SRP rev. 10 targets
There has been a change in the format of port identifiers between
revision 10 of the SRP specification and the current revision 16A.

Revision 10 specifies port identifier format as

  lower 8 bytes :  GUID   upper 8 bytes :  Extension

Whereas revision 16A specifies it as 

 lower 8 bytes :  Extension  upper 8 bytes :  GUID

There are older targets (e.g. SilverStorm Virtual Fibre Channel
Bridge) which conform to revision 10 of the SRP specification.

The I/O class of revision 10 is 0xFF00 and the I/O class of revision
16A is 0x0100.

For supporting older targets, this patch:

1) Adds a new optional target creation parameter "io_class". Default
   value of io_class is 0x0100 (i.e. revision 16A)
2) Uses the correct port identifier format for targets with IO class
   of 0xFF00 (i.e. conforming to revision 10)

Signed-off-by: Ramachandra K <rkuchimanchi@silverstorm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:38 -07:00
Or Gerlitz 6c8c1aa25d IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
When creating a FMR pool, query the IB device and use the returned
max_map_map_per_fmr attribute as for the max number of FMR remaps. If
the device does not suport querying this attribute, use the original
IB_FMR_MAX_REMAPS (32) default.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:37 -07:00
Or Gerlitz d4cb0784fd IB/mthca: Fill in max_map_per_fmr device attribute
Report the true max_map_per_fmr value from mthca_query_device(),
taking into account the change in FMR remapping introduced by the
Sinai performance optimization.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:37 -07:00
Roland Dreier 6eddb5cb90 IB/ipath: Add client reregister event generation
Generate a client reregister event instead of a LID change event when
client reregister bit is set.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:37 -07:00
Leonid Arsh 12bbb2b7be IB/mthca: Add client reregister event generation
Change the mthca snoop of MADs that set PortInfo to check if the SM
has set the client reregister bit, and if it has, generate a client
reregister event.  If the bit is not set, just generate a LID change
event as usual.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:36 -07:00
Leonid Arsh da2ab62ab5 IB: Move struct port_info from ipath to <rdma/ib_smi.h>
Move ipath's struct port_info into <rdma/ib_smi.h>, so that it can be
used by mthca to implement client reregister support.

Remove the __attribute__((packed)) because all the members of the struct
are naturally aligned anyway.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:36 -07:00
Leonid Arsh 508e434123 IPoIB: Handle client reregister events
Handle client reregister events by treating them just like LID or
SM changes -- flush all cached paths and rejoin multicast groups.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:36 -07:00
Jack Morgenstein 37c22a7721 IPoIB: Fix kernel unaligned access on ia64
Fix misaligned access faults on ia64: never cast a misaligned
neighbour->ha + 4 pointer to union ib_gid type; pass a void * pointer
instead.  The memcpy was being optimized to use full word accesses
because the compiler thought that union ib_gid is always aligned.

The cast in IPOIB_GID_ARG is safe, since it is fixed to access each
byte separately.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:35 -07:00
Roland Dreier 31c02e2157 IPoIB: Avoid using stale last_send counter when reaping AHs
The comparisons of priv->tx_tail to ah->last_send in ipoib_free_ah()
and ipoib_post_receive() are slightly unsafe, because priv->tx_lock is
not held and hence a stale value of ah->last_send might be used, which
would lead to freeing an AH before the driver was really done with it.
The simple way to fix this is to the optimization of early free from
ipoib_free_ah() and unconditionally queue AHs for reaping, and then
take priv->tx_lock in __ipoib_reap_ah().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:34 -07:00
Jack Morgenstein 9874e74655 IB/mad: Check GID/LID when matching requests
Check GID/LID for requester side when searching for request which
matches received response.  This is in order to guarantee uniqueness
if the same TID is used when requesting via multiple source LIDs (when
LMC is not zero).  Use ports' cached LMC to perform the check.

Further, do not perform LID check for direct-routed packets, since
the permissive LID makes a proper check impossible.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:34 -07:00
Jack Morgenstein 6fb9cdbf2c IB: Add caching of ports' LMC
Add an LMC cache to struct ib_device, and add a function
ib_get_cached_lmc() to query the cache.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:34 -07:00
Michael S. Tsirkin 856c256f88 IB/cm: remove unneeded flush_workqueue
destroy_workqueue() already does flush_workqueue().

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2006-06-17 20:37:33 -07:00
Sean Hefty 4be10c1e6d IB/ucm: convert semaphore to mutex
Convert semaphore in ib_ucm_file to a real mutex.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:33 -07:00
Roland Dreier 6bfa24fa3e IB/srp: Get rid of "Target has req_lim 0" messages
It's perfectly valid for a connection to an SRP target to have a
request limit of 0, so get rid of the message about it, which can spam
kernel logs even with printk_ratelimit().  Keep a count of such events
in a "zero_req_lim" SCSI host attribute instead, so someone who cares
can look at the statistics.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:33 -07:00
Ishai Rabinovitz b7ac4ab497 IB/srp: Handle DREQ events from CM
Handle IB_CM_DREQ_ERROR and IB_CM_DREQ_RECEIVED events from the CM,
instead of just printing "Unhandled CM event".  In the case of
DREQ_ERROR, just ignore the event -- a TIMEWAIT_EXIT will be generated
also.  For DREQ_RECEIVED, send a DREP in response to shut the
connection down cleanly.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:32 -07:00
Vu Pham 74b0a15b5e IB/srp: Allow sg_tablesize to be adjusted
Make the sg_tablesize used by SRP adjustable at module load time via a
module parameter.  Calculate the corresponding IU length required to
support this.

Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:32 -07:00
Vu Pham 52fb2b50c4 IB/srp: Allow cmd_per_lun to be set per target port
Allow userspace to throttle traffic on a given connection to a target
port by adding "max_cmd_per_lun=xyz" to lower the cmd_per_lun value
set for that scsi_host.

Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:31 -07:00
Ishai Rabinovitz 0c5b395239 IB/srp: Clean up loop in srp_remove_one()
Interrupts will always be enabled in srp_remove_one(), so
spin_lock_irq() can be used instead of spin_lock_irqsave().
Also, the loop takes target->scsi_host->host_lock, so target->state
can just be set to SRP_TARGET_REMOVED witout testing the old value.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:31 -07:00
Roland Dreier 403a496fd4 IB: Make needlessly global ib_mad_cache static
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:31 -07:00
Matthew Wilcox b3589fd490 IB/srp: Change target_mutex to a spinlock
The SRP driver never sleeps while holding target_mutex, and it's just
used to protect some simple list operations, so hold times will be
short.  So just convert it to a spinlock, which is smaller and faster.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Matthew Wilcox 549c5fc2c8 IB/srp: Get rid of unneeded use of list_for_each_entry_safe()
list_for_each_entry_safe() is used in one place where the list isn't
modified.  So just change it to list_for_each_entry().

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Matthew Wilcox 1962a4a1e4 IB/srp: Use SCAN_WILD_CARD from SCSI headers
SCAN_WILD_CARD is indeed available from <scsi/scsi.h>, which is
already included.  So get rid of private hack.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Roland Dreier e9cd59418f IB/mthca: Convert FW commands to use wait_for_completion_timeout()
The kernel has had wait_for_completion_timeout() for a long time now.
mthca should use it to handle FW commands timing out, instead of
implementing the same thing in a much more complicated way by using
wait_for_completion() along with a timer that does complete().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Roland Dreier f5358a172f IB/srp: Use FMRs to map gather/scatter lists
Create an SRP FMR pool on HCAs that support FMRs, and use FMRs to map
gather/scatter lists that have more than one entry into a single
memory region that appears virtually contiguous to the SRP target
(which is the RDMA initiator).

This patch bails out on FMR mapping for SCSI commands where the
gather/scatter list cannot be mapped into a single FMR because there
are sub-page-sized entries in middle of the list.  An unaligned
start or end of the list is OK.

Based on a patch by Vu Pham <vuhuong@mellanox.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:29 -07:00
Michael S. Tsirkin a26026c122 IB/mthca: Remove dead code
Kill some dead code in mthca_eq.c

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:29 -07:00
Sean Hefty e51060f08a IB: IP address based RDMA connection manager
Kernel connection management agent over InfiniBand that connects based
on IP addresses.  The agent defines a generic RDMA connection
abstraction to support clients wanting to connect over different RDMA
devices.

The agent also handles RDMA device hotplug events on behalf of clients.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:29 -07:00
Sean Hefty 7025fcd36b IB: address translation to map IP toIB addresses (GIDs)
Add an address translation service that maps IP addresses to
InfiniBand GID addresses using IPoIB.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:28 -07:00
Sean Hefty 6e61d04f2d IB/cm: Match connection requests based on private data
Extend matching connection requests to listens in the InfiniBand CM to
include private data checks.

This allows applications to listen on the same service identifier,
with private data directing the request to the appropriate application.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:28 -07:00
Sean Hefty 6a9af2e18a IB: common handling for marshalling parameters to/from userspace
Provide common handling for marshalling data between userspace clients
and kernel InfiniBand drivers.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:27 -07:00
Michael S. Tsirkin 4e56ea794e IB/mthca: memfree completion with error FW bug workaround
Memfree firmware is in rare cases reporting WQE index == base - 1 in
receive completion with error, instead of (rq size - 1); base is 0 in
mthca.  Here is a patch to avoid kernel crash and report a correct WR
id in this case.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:20 -07:00
Michael S. Tsirkin 13aa6ecb47 IB/mthca: restore missing PCI registers after reset
mthca does not restore the following PCI-X/PCI Express registers after reset:
  PCI-X device: PCI-X command register
  PCI-X bridge: upstream and downstream split transaction registers
  PCI Express : PCI Express device control and link control registers

This causes instability and/or bad performance on systems where one of
these registers is set to a non-default value by BIOS.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:00 -07:00
Eli Cohen 959eb39297 IPoIB: Fix AH leak at interface down
When ipoib_stop() is called it first calls netif_stop_queue() to stop
the kernel from passing more packets to the network driver. However,
the completion handler may call netif_wake_queue() re-enabling packet
transfer.

This might result in leaks (we see AH leaks which we think can be
attributed to this bug) as new packets get posted while the interface
is going down.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-05 09:51:36 -07:00
Michael S. Tsirkin ab28b171ea IB/mthca: Fix posting lists of 256 receive requests to SRQ for Tavor
If we post a list of length exactly a multiple of 256, nreq in
doorbell gets set to 256 which is wrong: it should be encoded by 0.
This is because we only zero it out on the next WR, which may not be
there.  The solution is to ring the doorbell after posting a WQE, not
before posting the next one.

This is the same bug that we just fixed for QPs with non-shared RQ.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-24 13:43:37 -07:00
Bryan O'Sullivan 09b74de9ff IB/ipath: deref correct pointer when using kernel SMA
At this point, the core QP structure hasn't been initialized, so what's
in there isn't valid.  Get the same information elsewhere.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23 13:29:35 -07:00
Bryan O'Sullivan 3977026462 IB/ipath: fix null deref during rdma ops
The problem was that node A's sending thread, which handles sending RDMA
read response data, would write the trigger word, the last packet would
be sent, node B would send a new RDMA read request, node A's interrupt
handler would initialize s_rdma_sge, then node A's sending thread would
update s_rdma_sge.  This didn't happen very often naturally but was more
frequent with 1 byte RDMA reads.  Rather than adding more locking or
increasing the QP structure size and copying sge data, I modified the
copy routine to update the pointers before writing the trigger word to
avoid the update race.

Signed-off-by: Ralph Campbell <ralphc@pathscale.com>
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23 13:29:35 -07:00
Bryan O'Sullivan 41c75a19bf IB/ipath: register as IB device owner
This fixes an oops.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23 13:29:35 -07:00
Bryan O'Sullivan 9dcc0e58e2 IB/ipath: enable PE800 receive interrupts on user ports
Fixed so it works on the PE-800.  It had not previously been updated to
match PE-800 receive interrupt differences from HT-400.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23 13:29:35 -07:00