Commit Graph

15 Commits

Author SHA1 Message Date
Paolo 'Blaisorblade' Giarrusso d44ed4f868 [PATCH] shmem_populate: avoid an useless check, and some comments
Either shmem_getpage returns a failure, or it found a page, or it was told
it couldn't do any I/O.  So it's useless to check nonblock in the else
branch.  We could add a BUG() there but I preferred to comment the
offending function.

This was taken out from one Ingo Molnar's old patch I'm resurrecting.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:45 -07:00
Hugh Dickins 5d337b9194 [PATCH] swap: swap_lock replace list+device
The idea of a swap_device_lock per device, and a swap_list_lock over them all,
is appealing; but in practice almost every holder of swap_device_lock must
already hold swap_list_lock, which defeats the purpose of the split.

The only exceptions have been swap_duplicate, valid_swaphandles and an
untrodden path in try_to_unuse (plus a few places added in this series).
valid_swaphandles doesn't show up high in profiles, but swap_duplicate does
demand attention.  However, with the hold time in get_swap_pages so much
reduced, I've not yet found a load and set of swap device priorities to show
even swap_duplicate benefitting from the split.  Certainly the split is mere
overhead in the common case of a single swap device.

So, replace swap_list_lock and swap_device_lock by spinlock_t swap_lock
(generally we seem to prefer an _ in the name, and not hide in a macro).

If someone can show a regression in swap_duplicate, then probably we should
add a hashlock for the swap_map entries alone (shorts being anatomic), so as
to help the case of the single swap device too.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:42 -07:00
Badari Pulavarty b0cfbd995d [PATCH] fix for generic_file_write iov problem
Here is the fix for the problem described in

	http://bugzilla.kernel.org/show_bug.cgi?id=4721

Basically, problem is generic_file_buffered_write() is accessing beyond end
of the iov[] vector after handling the last vector.  If we happen to cross
page boundary, we get a fault.

I think this simple patch is good enough.  If we really don't want to
depend on the "count", then we need pass nr_segs to
filemap_set_next_iovec() and decrement it and check it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:39 -07:00
Hifumi Hisashi 1e8a81c5a3 [PATCH] Fix the error handling in direct I/O
Fix a bug on error handling in the direct I/O function.

Currently, if a file is opened with the O_DIRECT|O_SYNC flag, the write()
syscall cannot receive the EIO error after an I/O error (SCSI cable is
disconnected etc.).

Return values of other points that call generic_osync_inode() are treated
appropriately.

Signed-off-by: Hisashi Hifumi  <hifumi.hisashi@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:25 -07:00
Carsten Otte ceffc07852 [PATCH] xip: fs/mm: execute in place
- generic_file* file operations do no longer have a xip/non-xip split
- filemap_xip.c implements a new set of fops that require get_xip_page
  aop to work proper. all new fops are exported GPL-only (don't like to
  see whatever code use those except GPL modules)
- __xip_unmap now uses page_check_address, which is no longer static
  in rmap.c, and defined in linux/rmap.h
- mm/filemap.h is now much more clean, plainly having just Linus'
  inline funcs moved here from filemap.c
- fix includes in filemap_xip to make it build cleanly on i386

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:41 -07:00
Christoph Lameter 45778ca819 [PATCH] Remove f_error field from struct file
The following patch removes the f_error field and all checks of f_error.

Trond said:

  f_error was introduced for NFS, and made sense when we were guaranteed
  always to have a file pointer around when write errors occurred.  Since
  then, we have (for various reasons) had to introduce the nfs_open_context in
  order to track the file read/write state, and it made sense to move our
  f_error tracking there too.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:33 -07:00
Martin Schwidefsky a511718168 [PATCH] broken fault_in_pages_readable call in generic_file_buffered_write()
fault_in_pages_readable() is being passed an incorrect `end' address, which
can result in writes accidentally faulting in pages which will not be affected
by the write() call.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-06 14:42:23 -07:00
Suparna Bhattacharya b5c44c2147 [PATCH] fix for __generic_file_aio_read() to return 0 on EOF
I came across the following problem while running ltp-aiodio testcases from
ltp-full-20050405 on linux-2.6.12-rc3-mm3.  I tried running the tests with
EXT3 as well as JFS filesystems.

One or two fsx-linux testcases were hung after some time.  These testcases
were hanging at wait_for_all_aios().

Debugging shows that there were some iocbs which were not getting completed
eventhough the last retry for those returned -EIOCBQUEUED.  Also all such
pending iocbs represented READ operation.

Further debugging revealed that all such iocbs hit EOF in the DIO layer.
To be more precise, the "pos" from which they were trying to read was
greater than the "size" of the file.  So the generic_file_direct_IO
returned 0.

This happens rarely as there is already a check in
__generic_file_aio_read(), for whether "pos" < "size" before calling direct
IO routine.

>size = i_size_read(inode);
>if (pos < size) {
>	  retval = generic_file_direct_IO(READ, iocb,
>                               iov, pos, nr_segs);

But for READ, we are taking the inode->i_sem only in the DIO layer.  So it
is possible that some other process can change the size of the file before
we take the i_sem.  In such a case ( when "pos" > "size"), the
__generic_file_aio_read() would return -EIOCBQUEUED even though there were
no I/O requests submitted by the DIO layer.  This would cause the AIO layer
to expect aio_complete() for THE iocb, which doesnot happen.  And thus the
test hangs forever, waiting for an I/O completion, where there are no
requests submitted at all.

The following patch makes __generic_file_aio_read() return 0 (instead of
returning -EIOCBQUEUED), on getting 0 from generic_file_direct_IO(), so
that the AIO layer does the aio_complete().

Testing:

I have tested the patch on a SMP machine(with 2 Pentium 4 (HT)) running
linux-2.6.12-rc3-mm3.  I ran the ltp-aiodio testcases and none of the
fsx-linux tests hung.  Also the aio-stress tests ran without any problem.

Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-21 16:45:24 -07:00
Christoph Hellwig 91bb524168 [PATCH] remove outdated comments from filemap.c
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:43 -07:00
Martin Waitz 67be2dd1ba [PATCH] DocBook: fix some descriptions
Some KernelDoc descriptions are updated to match the current code.
No code changes.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:26 -07:00
Matt Mackall cd7619d6bf [PATCH] Exterminate PAGE_BUG
Remove PAGE_BUG - repalce it with BUG and BUG_ON.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:01 -07:00
William Lee Irwin III dd1d5afca8 [PATCH] sync_page() smp_mb() comment
The smp_mb() is becaus sync_page() doesn't have PG_locked while it accesses
page_mapping(page).  The comments in the patch (the entire patch is the
addition of this comment) try to explain further how and why smp_mb() is
used.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:38 -07:00
akpm@osdl.org f021e92101 [PATCH] generic_file_buffered_write fixes
Anton Altaparmakov <aia21@cam.ac.uk> points out:

- It calls fault_in_pages_readable() which is completely bogus if @nr_segs >
  1.  It needs to be replaced by a to be written
  "fault_in_pages_readable_iovec()".

- It increments @buf even in the iovec case thus @buf can point to random
  memory really quickly (in the iovec case) and then it calls
  fault_in_pages_readable() on this random memory.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:35 -07:00
Jeff Moyer d345734267 [PATCH] filemap_getpage can block when MAP_NONBLOCK specified
We will return NULL from filemap_getpage when a page does not exist in the
page cache and MAP_NONBLOCK is specified, here:

	page = find_get_page(mapping, pgoff);
	if (!page) {
		if (nonblock)
			return NULL;
		goto no_cached_page;
	}

But we forget to do so when the page in the cache is not uptodate.  The
following could result in a blocking call:

	/*
	 * Ok, found a page in the page cache, now we need to check
	 * that it's up-to-date.
	 */
	if (!PageUptodate(page))
		goto page_not_uptodate;



Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:05 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00