Commit Graph

333 Commits

Author SHA1 Message Date
Jens Axboe c11f0c0b5b block/mm: make bdev_ops->rw_page() take a bool for read/write
Commit abf545484d changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.

Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.

Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Mike Christie abf545484d mm/block: convert rw_page users to bio op use
The rw_page users were not converted to use bio/req ops. As a result
bdev_write_page is not passing down REQ_OP_WRITE and the IOs will
be sent down as reads.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixes: 4e1b2d52a8 ("block, fs, drivers: remove REQ_OP compat defs and related code")

Modified by me to:

1) Drop op_flags passing into ->rw_page(), as we don't use it.
2) Make op_is_write() and friends safe to use for !CONFIG_BLOCK

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:25:33 -06:00
Ross Zwisler 99a01cdf9d block: remove BLK_DEV_DAX config option
The functionality for block device DAX was already removed with commit
acc93d30d7 ("Revert "block: enable dax for raw block devices"")

However, we still had a config option hanging around that was always
disabled because it depended on CONFIG_BROKEN.  This config option was
introduced in commit 03cdadb040 ("block: disable block device DAX by
default")

This change reverts that commit, removing the dead config option.

Link: http://lkml.kernel.org/r/20160729182314.6368-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Linus Torvalds a867d7349e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull userns vfs updates from Eric Biederman:
 "This tree contains some very long awaited work on generalizing the
  user namespace support for mounting filesystems to include filesystems
  with a backing store.  The real world target is fuse but the goal is
  to update the vfs to allow any filesystem to be supported.  This
  patchset is based on a lot of code review and testing to approach that
  goal.

  While looking at what is needed to support the fuse filesystem it
  became clear that there were things like xattrs for security modules
  that needed special treatment.  That the resolution of those concerns
  would not be fuse specific.  That sorting out these general issues
  made most sense at the generic level, where the right people could be
  drawn into the conversation, and the issues could be solved for
  everyone.

  At a high level what this patchset does a couple of simple things:

   - Add a user namespace owner (s_user_ns) to struct super_block.

   - Teach the vfs to handle filesystem uids and gids not mapping into
     to kuids and kgids and being reported as INVALID_UID and
     INVALID_GID in vfs data structures.

  By assigning a user namespace owner filesystems that are mounted with
  only user namespace privilege can be detected.  This allows security
  modules and the like to know which mounts may not be trusted.  This
  also allows the set of uids and gids that are communicated to the
  filesystem to be capped at the set of kuids and kgids that are in the
  owning user namespace of the filesystem.

  One of the crazier corner casees this handles is the case of inodes
  whose i_uid or i_gid are not mapped into the vfs.  Most of the code
  simply doesn't care but it is easy to confuse the inode writeback path
  so no operation that could cause an inode write-back is permitted for
  such inodes (aka only reads are allowed).

  This set of changes starts out by cleaning up the code paths involved
  in user namespace permirted mounts.  Then when things are clean enough
  adds code that cleanly sets s_user_ns.  Then additional restrictions
  are added that are possible now that the filesystem superblock
  contains owner information.

  These changes should not affect anyone in practice, but there are some
  parts of these restrictions that are changes in behavior.

   - Andy's restriction on suid executables that does not honor the
     suid bit when the path is from another mount namespace (think
     /proc/[pid]/fd/) or when the filesystem was mounted by a less
     privileged user.

   - The replacement of the user namespace implicit setting of MNT_NODEV
     with implicitly setting SB_I_NODEV on the filesystem superblock
     instead.

     Using SB_I_NODEV is a stronger form that happens to make this state
     user invisible.  The user visibility can be managed but it caused
     problems when it was introduced from applications reasonably
     expecting mount flags to be what they were set to.

  There is a little bit of work remaining before it is safe to support
  mounting filesystems with backing store in user namespaces, beyond
  what is in this set of changes.

   - Verifying the mounter has permission to read/write the block device
     during mount.

   - Teaching the integrity modules IMA and EVM to handle filesystems
     mounted with only user namespace root and to reduce trust in their
     security xattrs accordingly.

   - Capturing the mounters credentials and using that for permission
     checks in d_automount and the like.  (Given that overlayfs already
     does this, and we need the work in d_automount it make sense to
     generalize this case).

  Furthermore there are a few changes that are on the wishlist:

   - Get all filesystems supporting posix acls using the generic posix
     acls so that posix_acl_fix_xattr_from_user and
     posix_acl_fix_xattr_to_user may be removed.  [Maintainability]

   - Reducing the permission checks in places such as remount to allow
     the superblock owner to perform them.

   - Allowing the superblock owner to chown files with unmapped uids and
     gids to something that is mapped so the files may be treated
     normally.

  I am not considering even obvious relaxations of permission checks
  until it is clear there are no more corner cases that need to be
  locked down and handled generically.

  Many thanks to Seth Forshee who kept this code alive, and putting up
  with me rewriting substantial portions of what he did to handle more
  corner cases, and for his diligent testing and reviewing of my
  changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
  fs: Call d_automount with the filesystems creds
  fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
  evm: Translate user/group ids relative to s_user_ns when computing HMAC
  dquot: For now explicitly don't support filesystems outside of init_user_ns
  quota: Handle quota data stored in s_user_ns in quota_setxquota
  quota: Ensure qids map to the filesystem
  vfs: Don't create inodes with a uid or gid unknown to the vfs
  vfs: Don't modify inodes with a uid or gid unknown to the vfs
  cred: Reject inodes with invalid ids in set_create_file_as()
  fs: Check for invalid i_uid in may_follow_link()
  vfs: Verify acls are valid within superblock's s_user_ns.
  userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
  fs: Refuse uid/gid changes which don't map into s_user_ns
  selinux: Add support for unprivileged mounts from user namespaces
  Smack: Handle labels consistently in untrusted mounts
  Smack: Add support for unprivileged mounts from user namespaces
  fs: Treat foreign mounts as nosuid
  fs: Limit file caps to the user namespace of the super block
  userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
  userns: Remove implicit MNT_NODEV fragility.
  ...
2016-07-29 15:54:19 -07:00
Linus Torvalds 6784725ab0 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Assorted cleanups and fixes.

  Probably the most interesting part long-term is ->d_init() - that will
  have a bunch of followups in (at least) ceph and lustre, but we'll
  need to sort the barrier-related rules before it can get used for
  really non-trivial stuff.

  Another fun thing is the merge of ->d_iput() callers (dentry_iput()
  and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
  except the one in __d_lookup_lru())"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  fs/dcache.c: avoid soft-lockup in dput()
  vfs: new d_init method
  vfs: Update lookup_dcache() comment
  bdev: get rid of ->bd_inodes
  Remove last traces of ->sync_page
  new helper: d_same_name()
  dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
  vfs: clean up documentation
  vfs: document ->d_real()
  vfs: merge .d_select_inode() into .d_real()
  unify dentry_iput() and dentry_unlink_inode()
  binfmt_misc: ->s_root is not going anywhere
  drop redundant ->owner initializations
  ufs: get rid of redundant checks
  orangefs: constify inode_operations
  missed comment updates from ->direct_IO() prototype change
  file_inode(f)->i_mapping is f->f_mapping
  trim fsnotify hooks a bit
  9p: new helper - v9fs_parent_fid()
  debugfs: ->d_parent is never NULL or negative
  ...
2016-07-28 12:59:05 -07:00
Toshi Kani 163d4baaeb block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Currently, presence of direct_access() in block_device_operations
indicates support of DAX on its block device.  Because
block_device_operations is instantiated with 'const', this DAX
capablity may not be enabled conditinally.

In preparation for supporting DAX to device-mapper devices, add
QUEUE_FLAG_DAX to request_queue flags to advertise their DAX
support.  This will allow to set the DAX capability based on how
mapped device is composed.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <linux-s390@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:01:01 -06:00
Al Viro a4a4f9439c bdev: get rid of ->bd_inodes
Since 2006 we have ->i_bdev pinning bdev in question, so there's no
way to get to bdev ->evict_inode() while there's an aliasing inode
anywhere.  In other words, the only place walking the list of aliases
is guaranteed to do it only when the list is empty...

Remove the detritus; it should've been done in "[PATCH] Fix a race
condition between ->i_mapping and iput()", but nobody had noticed it
back then.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-19 13:16:52 -04:00
Eric W. Biederman a2982cc922 vfs: Generalize filesystem nodev handling.
Introduce a function may_open_dev that tests MNT_NODEV and a new
superblock flab SB_I_NODEV.  Use this new function in all of the
places where MNT_NODEV was previously tested.

Add the new SB_I_NODEV s_iflag to proc, sysfs, and mqueuefs as those
filesystems should never support device nodes, and a simple superblock
flags makes that very hard to get wrong.  With SB_I_NODEV set if any
device nodes somehow manage to show up on on a filesystem those
device nodes will be unopenable.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:57 -05:00
Linus Torvalds 315227f6da DAX error handling for 4.7
- Until now, dax has been disabled if media errors were found on
   any device. This enables the use of DAX in the presence of these
   errors by making all sector-aligned zeroing go through the driver.
 - The driver (already) has the ability to clear errors on writes that
   are sent through the block layer using 'DSMs' defined in ACPI 6.1.
 
 Other misc changes:
 
 - When mounting DAX filesystems, check to make sure the partition
   is page aligned. This is a requirement for DAX, and previously, we
   allowed such unaligned mounts to succeed, but subsequent reads/writes
   would fail.
 
 - Misc/cleanup fixes from Jan that remove unused code from DAX related to
   zeroing, writeback, and some size checks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXQ4GKAAoJEHr6Yb6juE3/zowP/iclIhgXXXMQJRUHJlePMXC8
 15sGZ32JS1ak9g7vrsmNVEDNynfNtiMYdBxtUyRuj6xqgwdZvFk3F55KOCPtaeA1
 +yADkgeRkTAcwzmHw9WQVEzBCqyzSisdrwtEfH817qdq9FJdH66x2Kos6i+HeAVr
 5Q/e4gs7lKrjf384/QBl+wxNZOndJaQAPd2VRHQqx2A9F33v0ljdwRaUG1r4fjK2
 dtmhcZCqdQyuAGXW3piTnZc5ZFc3DPqO4FkEfqkEK3lFOflK0fd8wMsAZRp/Jd0j
 GJsgnVSWSqG0Dz476djlG0w8t2p5Jv1g9cKChV+ZZEdFLKWHCOUFqXNj8uI8I4k5
 cOEKCHyJ3IwfSHhNQqktEWrQN4T8ZXhWtuc9GuV4UZYuqJqHci6EdR/YsWsJjV+L
 lm/qvK4ipDS1pivxOy8KX/iN0z7Io8J9GXpStDx3g8iWjLlh4YYlbJLWeeRepo/z
 aPlV/QAKcHiGY6jzLExrZIyCWkzwo6O+0p1Kxerv9/7K/32HWbOodZ+tC8eD+N25
 pV69nCGf+u50T2TtIx1+iann4NC1r7zg5yqnT9AgpyZpiwR5joCDzI5sXW+D0rcS
 vPtfM84Ccdeq/e6mvfIpZgR0/npQapKnrmUest0J7P2BFPHiFPji1KzZ7M+1aFOo
 9R6JdrAj0Sc+FBa+cGzH
 =v6Of
 -----END PGP SIGNATURE-----

Merge tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull misc DAX updates from Vishal Verma:
 "DAX error handling for 4.7

   - Until now, dax has been disabled if media errors were found on any
     device.  This enables the use of DAX in the presence of these
     errors by making all sector-aligned zeroing go through the driver.

   - The driver (already) has the ability to clear errors on writes that
     are sent through the block layer using 'DSMs' defined in ACPI 6.1.

  Other misc changes:

   - When mounting DAX filesystems, check to make sure the partition is
     page aligned.  This is a requirement for DAX, and previously, we
     allowed such unaligned mounts to succeed, but subsequent
     reads/writes would fail.

   - Misc/cleanup fixes from Jan that remove unused code from DAX
     related to zeroing, writeback, and some size checks"

* tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: fix a comment in dax_zero_page_range and dax_truncate_page
  dax: for truncate/hole-punch, do zeroing through the driver if possible
  dax: export a low-level __dax_zero_page_range helper
  dax: use sb_issue_zerout instead of calling dax_clear_sectors
  dax: enable dax in the presence of known media errors (badblocks)
  dax: fallback from pmd to pte on error
  block: Update blkdev_dax_capable() for consistency
  xfs: Add alignment check for DAX mount
  ext2: Add alignment check for DAX mount
  ext4: Add alignment check for DAX mount
  block: Add bdev_dax_supported() for dax mount checks
  block: Add vfs_msg() interface
  dax: Remove redundant inode size checks
  dax: Remove pointless writeback from dax_do_io()
  dax: Remove zeroing from dax_io()
  dax: Remove dead zeroing code from fault handlers
  ext2: Avoid DAX zeroing to corrupt data
  ext2: Fix block zeroing in ext2_get_blocks() for DAX
  dax: Remove complete_unwritten argument
  DAX: move RADIX_DAX_ definitions to dax.c
2016-05-26 19:34:26 -07:00
Linus Torvalds 1f40c49570 libnvdimm for 4.7
1/ Device DAX for persistent memory:
    Device DAX is the device-centric analogue of Filesystem DAX
    (CONFIG_FS_DAX).  It allows memory ranges to be allocated and mapped
    without need of an intervening file system.  Device DAX is strict,
    precise and predictable.  Specifically this interface:
 
    a) Guarantees fault granularity with respect to a given page size
       (pte, pmd, or pud) set at configuration time.
 
    b) Enforces deterministic behavior by being strict about what fault
       scenarios are supported.
 
    Persistent memory is the first target, but the mechanism is also
    targeted for exclusive allocations of performance/feature differentiated
    memory ranges.
 
 2/ Support for the HPE DSM (device specific method) command formats.
    This enables management of these first generation devices until a
    unified DSM specification materializes.
 
 3/ Further ACPI 6.1 compliance with support for the common dimm
    identifier format.
 
 4/ Various fixes and cleanups across the subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXQhdeAAoJEB7SkWpmfYgCYP8P/RAgHkroL5lUKKU45TQUBKcY
 diC9POeNSccme4tIRIQCGQUZ7+7mKM5ECv2ulF4xYOHvFBCcd/8OF6xKAXs48r3v
 oguYhvX1YvIkBc9FUfBQbR1IsCOJ7uWp/UYiYCIQEXS5tS9Jv545j3ASqDt9xWoV
 TWlceZn3yWSbASiV9qZ2eXhEkk75pg4yara++rsm2/7rs/TTXn5EIjBs+57BtAo+
 6utI4fTy0CQvBYwVzam3m7y9dt2Z2jWXL4hgmT7pkvJ7HDoctVly0P9+bknJPUAo
 g+NugKgTGeiqH5GYp5CTZ9KvL91sDF4q00pfinITVdFl0E3VE293cIHlAzSQBm5/
 w58xxaRV958ZvpH7EaBmYQG82QDi/eFNqeHqVGn0xAM6MlaqO7avUMQp2lRPYMCJ
 u1z/NloR5yo+sffHxsn5Luiq9KqOf6zk33PuxEkKbN74OayCSPn/SeVCO7rQR0B6
 yPMJTTcTiCLnId1kOWAPaEmuK2U3BW/+ogg7hKgeCQSysuy5n6Ok5a2vEx/gJRAm
 v9yF68RmIWumpHr+QB0TmB8mVbD5SY+xWTm3CqJb9MipuFIOF7AVsPyTgucBvE7s
 v+i5F6MDO6tcVfiDT4AiZEt6D2TM5RbtckkUEX3ZTD6j7CGuR5D8bH0HNRrghrYk
 KT1lAk6tjWBOGAHc5Ji7
 =Y3Xv
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this update was stabilized before the merge window and
  appeared in -next.  The "device dax" implementation was revised this
  week in response to review feedback, and to address failures detected
  by the recently expanded ndctl unit test suite.

  Not included in this pull request are two dax topic branches (dax
  error handling, and dax radix-tree locking).  These topics were
  deferred to get a few more days of -next integration testing, and to
  coordinate a branch baseline with Ted and the ext4 tree.  Vishal and
  Ross will send the error handling and locking topics respectively in
  the next few days.

  This branch has received a positive build result from the kbuild robot
  across 226 configs.

  Summary:

   - Device DAX for persistent memory: Device DAX is the device-centric
     analogue of Filesystem DAX (CONFIG_FS_DAX).  It allows memory
     ranges to be allocated and mapped without need of an intervening
     file system.  Device DAX is strict, precise and predictable.
     Specifically this interface:

      a) Guarantees fault granularity with respect to a given page size
         (pte, pmd, or pud) set at configuration time.

      b) Enforces deterministic behavior by being strict about what
         fault scenarios are supported.

     Persistent memory is the first target, but the mechanism is also
     targeted for exclusive allocations of performance/feature
     differentiated memory ranges.

   - Support for the HPE DSM (device specific method) command formats.
     This enables management of these first generation devices until a
     unified DSM specification materializes.

   - Further ACPI 6.1 compliance with support for the common dimm
     identifier format.

   - Various fixes and cleanups across the subsystem"

* tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (40 commits)
  libnvdimm, dax: fix deletion
  libnvdimm, dax: fix alignment validation
  libnvdimm, dax: autodetect support
  libnvdimm: release ida resources
  Revert "block: enable dax for raw block devices"
  /dev/dax, core: file operations and dax-mmap
  /dev/dax, pmem: direct access to persistent memory
  libnvdimm: stop requiring a driver ->remove() method
  libnvdimm, dax: record the specified alignment of a dax-device instance
  libnvdimm, dax: reserve space to store labels for device-dax
  libnvdimm, dax: introduce device-dax infrastructure
  nfit: add sysfs dimm 'family' and 'dsm_mask' attributes
  tools/testing/nvdimm: ND_CMD_CALL support
  nfit: disable vendor specific commands
  nfit: export subsystem ids as attributes
  nfit: fix format interface code byte order per ACPI6.1
  nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism
  nfit, libnvdimm: clarify "commands" vs "_DSMs"
  libnvdimm: increase max envelope size for ioctl
  acpi/nfit: Add sysfs "id" for NVDIMM ID
  ...
2016-05-23 11:18:01 -07:00
Dan Williams acc93d30d7 Revert "block: enable dax for raw block devices"
This reverts commit 5a023cdba5.

The functionality is superseded by the new "Device DAX" facility.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-20 22:02:56 -07:00
Dan Williams 0a70bd4305 dax: enable dax in the presence of known media errors (badblocks)
1/ If a mapping overlaps a bad sector fail the request.

2/ Do not opportunistically report more dax-capable capacity than is
   requested when errors present.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[vishal: fix a conflict with system RAM collision patches]
[vishal: add a 'size' parameter to ->direct_access]
[vishal: fix a conflict with DAX alignment check patches]
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-18 12:16:56 -06:00
Toshi Kani a8078b1fc6 block: Update blkdev_dax_capable() for consistency
blkdev_dax_capable() is similar to bdev_dax_supported(), but needs
to remain as a separate interface for checking dax capability of
a raw block device.

Rename and relocate blkdev_dax_capable() to keep them maintained
consistently, and call bdev_direct_access() for the dax capability
check.

There is no change in the behavior.

Link: https://lkml.org/lkml/2016/5/9/950
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@fb.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-17 00:44:13 -06:00
Toshi Kani 2d96afc8f7 block: Add bdev_dax_supported() for dax mount checks
DAX imposes additional requirements to a device.  Add
bdev_dax_supported() which performs all the precondition checks
necessary for filesystem to mount the device with dax option.

Also add a new check to verify if a partition is aligned by 4KB.
When a partition is unaligned, any dax read/write access fails,
except for metadata update.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@fb.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-17 00:44:11 -06:00
Toshi Kani 2af3a8159c block: Add vfs_msg() interface
In preparation of moving DAX capability checks to the block layer
from filesystem code, add a VFS message interface that aligns with
filesystem's message format.

For instance, a vfs_msg() message followed by XFS messages in case
of a dax mount error may look like:

  VFS (pmem0p1): error: unaligned partition for dax
  XFS (pmem0p1): DAX unsupported by block device. Turning off DAX.
  XFS (pmem0p1): Mounting V5 Filesystem
   :

vfs_msg() is largely based on ext4_msg().

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@fb.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-17 00:44:10 -06:00
Jan Kara 02fbd13975 dax: Remove complete_unwritten argument
Fault handlers currently take complete_unwritten argument to convert
unwritten extents after PTEs are updated. However no filesystem uses
this anymore as the code is racy. Remove the unused argument.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-16 18:11:51 -06:00
Christoph Hellwig e259221763 fs: simplify the generic_write_sync prototype
The kiocb already has the new position, so use that.  The only interesting
case is AIO, where we currently don't bother updating ki_pos.  We're about
to free the kiocb after we're done, so we might as well update it to make
everyone's life simpler.

While we're at it also return the bytes written argument passed in if
we were successful so that the boilerplate error switch code in the
callers can go away.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Christoph Hellwig dde0c2e798 fs: add IOCB_SYNC and IOCB_DSYNC
This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.

XXX: Will need a few additional audits for O_DSYNC

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Christoph Hellwig c8b8e32d70 direct-io: eliminate the offset argument to ->direct_IO
Including blkdev_direct_IO and dax_do_io.  It has to be ki_pos to actually
work, so eliminate the superflous argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Linus Torvalds 35d88d97be Merge branch 'for-4.6/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "Here are the core block changes for this merge window.  Not a lot of
  exciting stuff going on in this round, most of the changes have been
  on the driver side of things.  That pull request is coming next.  This
  pull request contains:

   - A set of fixes for chained bio handling from Christoph.

   - A tag bounds check for blk-mq from Hannes, ensuring that we don't
     do something stupid if a device reports an invalid tag value.

   - A set of fixes/updates for the CFQ IO scheduler from Jan Kara.

   - A set of blk-mq fixes from Keith, adding support for dynamic
     hardware queues, and fixing init of max_dev_sectors for stacking
     devices.

   - A fix for the dynamic hw context from Ming.

   - Enabling of cgroup writeback support on a block device, from
     Shaohua"

* 'for-4.6/core' of git://git.kernel.dk/linux-block:
  blk-mq: add bounds check on tag-to-rq conversion
  block: bio_remaining_done() isn't unlikely
  block: cleanup bio_endio
  block: factor out chained bio completion
  block: don't unecessarily clobber bi_error for chained bios
  block-dev: enable writeback cgroup support
  blk-mq: Fix NULL pointer updating nr_requests
  blk-mq: mark request queue as mq asap
  block: Initialize max_dev_sectors to 0
  blk-mq: dynamic h/w context count
  cfq-iosched: Allow parent cgroup to preempt its child
  cfq-iosched: Allow sync noidle workloads to preempt each other
  cfq-iosched: Reorder checks in cfq_should_preempt()
  cfq-iosched: Don't group_idle if cfqq has big thinktime
2016-03-18 16:43:11 -07:00
Shaohua Li 3684aa7099 block-dev: enable writeback cgroup support
block_dev's .writepages/.writepage already handles
wbc_init_bio/wbc_account_io. We only set the SB_I_CGROUPWB bit to
suppport writeback cgroup support.

Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03 14:50:53 -07:00
Ross Zwisler 7f6d5b529b dax: move writeback calls into the filesystems
Previously calls to dax_writeback_mapping_range() for all DAX filesystems
(ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range().

dax_writeback_mapping_range() needs a struct block_device, and it used
to get that from inode->i_sb->s_bdev.  This is correct for normal inodes
mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw
block devices and for XFS real-time files.

Instead, call dax_writeback_mapping_range() directly from the filesystem
->writepages function so that it can supply us with a valid block
device.  This also fixes DAX code to properly flush caches in response
to sync(2).

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-27 10:28:52 -08:00
Dan Williams 03cdadb040 block: disable block device DAX by default
The recent *sync enabling discovered that we are inserting into the
block_device pagecache counter to the expectations of the dirty data
tracking for dax mappings.  This can lead to data corruption.

We want to support DAX for block devices eventually, but it requires
wider changes to properly manage the pagecache.

   dump_stack+0x85/0xc2
   dax_writeback_mapping_range+0x60/0xe0
   blkdev_writepages+0x3f/0x50
   do_writepages+0x21/0x30
   __filemap_fdatawrite_range+0xc6/0x100
   filemap_write_and_wait+0x4a/0xa0
   set_blocksize+0x70/0xd0
   sb_set_blocksize+0x1d/0x50
   ext4_fill_super+0x75b/0x3360
   mount_bdev+0x180/0x1b0
   ext4_mount+0x15/0x20
   mount_fs+0x38/0x170

Mark the support broken so its disabled by default, but otherwise still
available for testing.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-27 10:28:52 -08:00
Ross Zwisler 9c5a05bc35 block: fix pfn_mkwrite() DAX fault handler
Previously the pfn_mkwrite() fault handler for raw block devices called
bldev_dax_fault() -> __dax_fault() to do a full DAX page fault.

Really what the pfn_mkwrite() fault handler needs to do is call
dax_pfn_mkwrite() to make sure that the radix tree entry for the given
PTE is marked as dirty so that a follow-up fsync or msync call will
flush it durably to media.

Fixes: 5a023cdba5 ("block: enable dax for raw block devices")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05 18:10:40 -08:00
Dan Williams 9f4736fe7c block: revert runtime dax control of the raw block device
Dynamically enabling DAX requires that the page cache first be flushed
and invalidated.  This must occur atomically with the change of DAX mode
otherwise we confuse the fsync/msync tracking and violate data
durability guarantees.  Eliminate the possibilty of DAX-disabled to
DAX-enabled transitions for now and revisit this for the next cycle.

Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-30 13:35:31 -08:00
Linus Torvalds cc673757e2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull final vfs updates from Al Viro:

 - The ->i_mutex wrappers (with small prereq in lustre)

 - a fix for too early freeing of symlink bodies on shmem (they need to
   be RCU-delayed) (-stable fodder)

 - followup to dedupe stuff merged this cycle

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: abort dedupe loop if fatal signals are pending
  make sure that freeing shmem fast symlinks is RCU-delayed
  wrappers for ->i_mutex access
  lustre: remove unused declaration
2016-01-23 12:24:56 -08:00
Ross Zwisler f9fe48bece dax: support dirty DAX entries in radix tree
Add support for tracking dirty DAX entries in the struct address_space
radix tree.  This tree is already used for dirty page writeback, and it
already supports the use of exceptional (non struct page*) entries.

In order to properly track dirty DAX pages we will insert new
exceptional entries into the radix tree that represent dirty DAX PTE or
PMD pages.  These exceptional entries will also contain the writeback
addresses for the PTE or PMD faults that we can use at fsync/msync time.

There are currently two types of exceptional entries (shmem and shadow)
that can be placed into the radix tree, and this adds a third.  We rely
on the fact that only one type of exceptional entry can be found in a
given radix tree based on its usage.  This happens for free with DAX vs
shmem but we explicitly prevent shadow entries from being added to radix
trees for DAX mappings.

The only shadow entries that would be generated for DAX radix trees
would be to track zero page mappings that were created for holes.  These
pages would receive minimal benefit from having shadow entries, and the
choice to have only one type of exceptional entry in a given radix tree
makes the logic simpler both in clear_exceptional_entry() and in the
rest of DAX.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22 17:02:18 -08:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Linus Torvalds 7c24d9f3b2 Merge branch 'for-4.5/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "We don't have a lot of core changes this time around, it's mostly in
  drivers, which will come in a subsequent pull.

  The cores changes include:

   - blk-mq
        - Prep patch from Christoph, changing blk_mq_alloc_request() to
          take flags instead of just using gfp_t for sleep/nosleep.
        - Doc patch from me, clarifying the difference between legacy
          and blk-mq for timer usage.
        - Fixes from Raghavendra for memory-less numa nodes, and a reuse
          of CPU masks.

   - Cleanup from Geliang Tang, using offset_in_page() instead of open
     coding it.

   - From Ilya, rename request_queue slab to it reflects what it holds,
     and a fix for proper use of bdgrab/put.

   - A real fix for the split across stripe boundaries from Keith.  We
     yanked a broken version of this from 4.4-rc final, this one works.

   - From Mike Krinkin, emit a trace message when we split.

   - From Wei Tang, two small cleanups, not explicitly clearing memory
     that is already cleared"

* 'for-4.5/core' of git://git.kernel.dk/linux-block:
  block: use bd{grab,put}() instead of open-coding
  block: split bios to max possible length
  block: add call to split trace point
  blk-mq: Avoid memoryless numa node encoded in hctx numa_node
  blk-mq: Reuse hardware context cpumask for tags
  blk-mq: add a flags parameter to blk_mq_alloc_request
  Revert "blk-flush: Queue through IO scheduler when flush not required"
  block: clarify blk_add_timer() use case for blk-mq
  bio: use offset_in_page macro
  block: do not initialise statics to 0 or NULL
  block: do not initialise globals to 0 or NULL
  block: rename request_queue slab cache
2016-01-19 15:03:34 -08:00
Dan Williams b2e0d1625e dax: fix lifetime of in-kernel dax mappings with dax_map_atomic()
The DAX implementation needs to protect new calls to ->direct_access()
and usage of its return value against the driver for the underlying
block device being disabled.  Use blk_queue_enter()/blk_queue_exit() to
hold off blk_cleanup_queue() from proceeding, or otherwise fail new
mapping requests if the request_queue is being torn down.

This also introduces blk_dax_ctl to simplify the interface from fs/dax.c
through dax_map_atomic() to bdev_direct_access().

[willy@linux.intel.com: fix read() of a hole]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:56:32 -08:00
Dan Williams fe683adabf dax: guarantee page aligned results from bdev_direct_access()
If a ->direct_access() implementation ever returns a map count less than
PAGE_SIZE, catch the error in bdev_direct_access().  This simplifies
error checking in upper layers.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:56:32 -08:00
Andrew Morton b832861cca fs/block_dev.c:bdev_write_page(): use blk_queue_enter(..., GFP_NOIO)
bdev_write_page() is used by swapout and by writepage where we cannot
use __GFP_FS or __GFP_IO.  So it is misleading to mention GFP_KERNEL
here.

blk_queue_enter() only actually looks at __GFP_DIRECT_RECLAIM, so no
bugs were harmed in the making of this patch.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 16:00:49 -08:00
Vladimir Davydov 5d097056c9 kmemcg: account certain kmem allocations to memcg
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg.  For the list, see below:

 - threadinfo
 - task_struct
 - task_delay_info
 - pid
 - cred
 - mm_struct
 - vm_area_struct and vm_region (nommu)
 - anon_vma and anon_vma_chain
 - signal_struct
 - sighand_struct
 - fs_struct
 - files_struct
 - fdtable and fdtable->full_fds_bits
 - dentry and external_name
 - inode for all filesystems. This is the most tedious part, because
   most filesystems overwrite the alloc_inode method.

The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds.  Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 16:00:49 -08:00
Linus Torvalds d080827f85 libnvdimm for 4.5
1/ Media error handling: The 'badblocks' implementation that originated
    in md-raid is up-levelled to a generic capability of a block device.
    This initial implementation is limited to being consulted in the pmem
    block-i/o path.  Later, 'badblocks' will be consulted when creating
    dax mappings.
 
 2/ Raw block device dax: For virtualization and other cases that want
    large contiguous mappings of persistent memory, add the capability to
    dax-mmap a block device directly.
 
 3/ Increased /dev/mem restrictions: Add an option to treat all io-memory
    as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is
    actively using an address range.  This behavior is controlled via the
    new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the
    existing "iomem=relaxed" kernel command line option.
 
 4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
    block device shutdown crash fix, and other small libnvdimm fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWlrhjAAoJEB7SkWpmfYgCFbAQALKsQfFwT6JFS+zlPgiNpbqw
 2VMNKEH0AfGYGj96mT02j2q+vSUmXLMIDMTsbe0sDdtwFZtQbFmhmryzPWUVppSu
 KGTlLPW8vuEhQVs91+UI3BQKkvpi0+tbR8hPOh9W6QhjpRT+lyHFKnsNR5HZy5wB
 K4/VMaT5ffd5/pXRTjkYiPQYTwWyfcvNjICj0YtqhPvOwS031m77JpFsWJ8HSpEX
 K99VlzNUPMXd1pYkHmFNXWw52fhRGNhwAEomLeKMdQfKms+KnbKp8BOSA0aCqU8E
 kpujQcilDXJwykFQZOFI3Z5Dxvrv8lxFTU8HRMBvo3ESzfTWjfqcvyjGOjDUcruw
 ihESFSJtdZzhrBiMnf9RRqSpMFJvAT8MVT6Q4D3mZUHCMPbUqFJsQjMPt9hEH3ho
 4F0D2lesOCkubUKFTZmjMoDb+szuKbVhYK8TeFVVEhizinc/Aj0NKuazJqi+CXB/
 xh0ER4ZxD8wvzqFFWvS5UvR1G9I5fr7+3jGRUrqGLHlSdeXP9dkEg28ao3QbWk3x
 1dPOen6ZqQ9WJ/E7eGmXbVEz2R4Xd79hMXQzdQwmKDk/KbxRoAp7hyU8BslAyrBf
 HCdmVt+RAgrxZYfFRXuLhqwEBThJnNrgZA3qu74FUpkpFg6xRUu1bAYBiF7N+bFi
 82b5UbMkveBTtkXjJoiR
 =7V5r
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has appeared in -next and independently received a
  build success notification from the kbuild robot.  The 'for-4.5/block-
  dax' topic branch was rebased over the weekend to drop the "block
  device end-of-life" rework that Al would like to see re-implemented
  with a notifier, and to address bug reports against the badblocks
  integration.

  There is pending feedback against "libnvdimm: Add a poison list and
  export badblocks" received last week.  Linda identified some localized
  fixups that we will handle incrementally.

  Summary:

   - Media error handling: The 'badblocks' implementation that
     originated in md-raid is up-levelled to a generic capability of a
     block device.  This initial implementation is limited to being
     consulted in the pmem block-i/o path.  Later, 'badblocks' will be
     consulted when creating dax mappings.

   - Raw block device dax: For virtualization and other cases that want
     large contiguous mappings of persistent memory, add the capability
     to dax-mmap a block device directly.

   - Increased /dev/mem restrictions: Add an option to treat all
     io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
     while a driver is actively using an address range.  This behavior
     is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
     overridden by the existing "iomem=relaxed" kernel command line
     option.

   - Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
     block device shutdown crash fix, and other small libnvdimm fixes"

* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
  block: kill disk_{check|set|clear|alloc}_badblocks
  libnvdimm, pmem: nvdimm_read_bytes() badblocks support
  pmem, dax: disable dax in the presence of bad blocks
  pmem: fail io-requests to known bad blocks
  libnvdimm: convert to statically allocated badblocks
  libnvdimm: don't fail init for full badblocks list
  block, badblocks: introduce devm_init_badblocks
  block: clarify badblocks lifetime
  badblocks: rename badblocks_free to badblocks_exit
  libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
  libnvdimm: Add a poison list and export badblocks
  nfit_test: Enable DSMs for all test NFITs
  md: convert to use the generic badblocks code
  block: Add badblock management for gendisks
  badblocks: Add core badblock management code
  block: fix del_gendisk() vs blkdev_ioctl crash
  block: enable dax for raw block devices
  block: introduce bdev_file_inode()
  restrict /dev/mem to idle io memory ranges
  arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
  ...
2016-01-13 19:15:14 -08:00
Ilya Dryomov ed8a9d2c81 block: use bd{grab,put}() instead of open-coding
- bd_acquire() and bd_forget() open-code bdgrab() and bdput()
- raw driver uses igrab() but never checks its return value and always
  holds another ref from bind_set() while calling it, so it's
  equivalent to bdgrab()

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-13 10:24:27 -07:00
Dan Williams 5a023cdba5 block: enable dax for raw block devices
If an application wants exclusive access to all of the persistent memory
provided by an NVDIMM namespace it can use this raw-block-dax facility
to forgo establishing a filesystem.  This capability is targeted
primarily to hypervisors wanting to provision persistent memory for
guests.  It can be disabled / enabled dynamically via the new BLKDAXSET
ioctl.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-09 06:30:49 -08:00
Dan Williams 4ebb16ca9a block: introduce bdev_file_inode()
Similar to the file_inode() helper, provide a helper to lookup the inode for a
raw block device itself.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-09 06:30:49 -08:00
Dmitry Monakhov 424081f3c8 fs: use gendisk->disk_name where possible
gendisk with part==0 is obviously gendisk->disk_name.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-06 12:42:11 -05:00
Ilya Dryomov 43d1c0eb7e block: detach bdev inode from its wb in __blkdev_put()
Since 52ebea749a ("writeback: make backing_dev_info host
cgroup-specific bdi_writebacks") inode, at some point in its lifetime,
gets attached to a wb (struct bdi_writeback).  Detaching happens on
evict, in inode_detach_wb() called from __destroy_inode(), and involves
updating wb.

However, detaching an internal bdev inode from its wb in
__destroy_inode() is too late.  Its bdi and by extension root wb are
embedded into struct request_queue, which has different lifetime rules
and can be freed long before the final bdput() is called (can be from
__fput() of a corresponding /dev inode, through dput() - evict() -
bd_forget().  bdevs hold onto the underlying disk/queue pair only while
opened; as soon as bdev is closed all bets are off.  In fact,
disk/queue can be gone before __blkdev_put() even returns:

1499 static void __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
1500 {
...
1518         if (bdev->bd_contains == bdev) {
1519                 if (disk->fops->release)
1520                         disk->fops->release(disk, mode);

[ Driver puts its references to disk/queue ]

1521         }
1522         if (!bdev->bd_openers) {
1523                 struct module *owner = disk->fops->owner;
1524
1525                 disk_put_part(bdev->bd_part);
1526                 bdev->bd_part = NULL;
1527                 bdev->bd_disk = NULL;
1528                 if (bdev != bdev->bd_contains)
1529                         victim = bdev->bd_contains;
1530                 bdev->bd_contains = NULL;
1531
1532                 put_disk(disk);

[ We put ours, the queue is gone
  The last bdput() would result in a write to invalid memory ]

1533                 module_put(owner);
...
1539 }

Since bdev inodes are special anyway, detach them in __blkdev_put()
after clearing inode's dirty bits, turning the problematic
inode_detach_wb() in __destroy_inode() into a noop.

add_disk() grabs its disk->queue since 523e1d399c ("block: make
gendisk hold a reference to its queue"), so the old ->release comment
is removed in favor of the new inode_detach_wb() comment.

Cc: stable@vger.kernel.org # 4.2+, needs backporting
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-04 11:02:17 -07:00
Christoph Hellwig 6f3b0e8bcf blk-mq: add a flags parameter to blk_mq_alloc_request
We already have the reserved flag, and a nowait flag awkwardly encoded as
a gfp_t.  Add a real flags argument to make the scheme more extensible and
allow for a nicer calling convention.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-01 10:53:59 -07:00
Dan Williams 2e6edc9538 block: protect rw_page against device teardown
Fix use after free crashes like the following:

 general protection fault: 0000 [#1] SMP
 Call Trace:
  [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem]
  [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem]
  [<ffffffff8128fd90>] bdev_read_page+0x50/0x60
  [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50
  [<ffffffff81297657>] mpage_readpages+0x107/0x170
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20
  [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310
  [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310
  [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0
  [<ffffffff811c76f6>] filemap_fault+0x396/0x530
  [<ffffffff811f816e>] __do_fault+0x4e/0xf0
  [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
[willy: symmetry fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-19 13:47:10 -08:00
Vivek Goyal dbd3ca5075 fs/block_dev.c: Remove WARN_ON() when inode writeback fails
If a block device is hot removed and later last reference to device
is put, we try to writeback the dirty inode. But device is gone and
that writeback fails.

Currently we do a WARN_ON() which does not seem to be the right thing.
Convert it to a ratelimited kernel warning.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
[jmoyer@redhat.com: get rid of unnecessary name initialization, 80 cols]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-11 09:36:57 -07:00
Martin K. Petersen 25520d55cd block: Inline blk_integrity in struct gendisk
Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.

This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.

Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:

 - Moving the blk_integrity definition to genhd.h.

 - Inlining blk_integrity in struct gendisk.

 - Removing the dynamic allocation code.

 - Adding helper functions which allow gendisk to set up and tear down
   the integrity sysfs dir when a disk is added/deleted.

 - Adding a blk_integrity_revalidate() callback for updating the stable
   pages bdi setting.

 - The calls that depend on whether a device has an integrity profile or
   not now key off of the bi->profile pointer.

 - Simplifying the integrity support routines in DM (Mike Snitzer).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:42 -06:00
Jeff Moyer f0b2e563bc blockdev: don't set S_DAX for misaligned partitions
The dax code doesn't currently support misaligned partitions,
so disable O_DIRECT via dax until such time as that support
materializes.

Cc: <stable@vger.kernel.org>
Suggested-by: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-09-15 20:08:05 -04:00
Linus Torvalds f6f7a63692 Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:
 "Almost all of the rest of MM.  There was an unusually large amount of
  MM material this time"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
  zpool: remove no-op module init/exit
  mm: zbud: constify the zbud_ops
  mm: zpool: constify the zpool_ops
  mm: swap: zswap: maybe_preload & refactoring
  zram: unify error reporting
  zsmalloc: remove null check from destroy_handle_cache()
  zsmalloc: do not take class lock in zs_shrinker_count()
  zsmalloc: use class->pages_per_zspage
  zsmalloc: consider ZS_ALMOST_FULL as migrate source
  zsmalloc: partial page ordering within a fullness_list
  zsmalloc: use shrinker to trigger auto-compaction
  zsmalloc: account the number of compacted pages
  zsmalloc/zram: introduce zs_pool_stats api
  zsmalloc: cosmetic compaction code adjustments
  zsmalloc: introduce zs_can_compact() function
  zsmalloc: always keep per-class stats
  zsmalloc: drop unused variable `nr_to_migrate'
  mm/memblock.c: fix comment in __next_mem_range()
  mm/page_alloc.c: fix type information of memoryless node
  memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
  ...
2015-09-08 17:52:23 -07:00
Matthew Wilcox c94c2acf84 dax: move DAX-related functions to a new header
In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to
return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is
defined in linux/mm.h.  Given that we don't want to include <linux/mm.h>
in <linux/fs.h>, the easiest solution is to move the DAX-related
functions to a new header, <linux/dax.h>.  We could also have moved
VM_FAULT_* definitions to a new header, or a different header that isn't
quite such a boil-the-ocean header as <linux/mm.h>, but this felt like
the best option.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
Linus Torvalds 12f03ee606 libnvdimm for 4.3:
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
    mechanism for adding device-driver-discovered memory regions to the
    kernel's direct map.  This facility is used by the pmem driver to
    enable pfn_to_page() operations on the page frames returned by DAX
    ('direct_access' in 'struct block_device_operations'). For now, the
    'memmap' allocation for these "device" pages comes from "System
    RAM".  Support for allocating the memmap from device memory will
    arrive in a later kernel.
 
 2/ Introduce memremap() to replace usages of ioremap_cache() and
    ioremap_wt().  memremap() drops the __iomem annotation for these
    mappings to memory that do not have i/o side effects.  The
    replacement of ioremap_cache() with memremap() is limited to the
    pmem driver to ease merging the api change in v4.3.  Completion of
    the conversion is targeted for v4.4.
 
 3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
    driver, update the VFS DAX implementation and PMEM api to provide
    persistence guarantees for kernel operations on a DAX mapping.
 
 4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
    cacheable to improve performance.
 
 5/ Miscellaneous updates and fixes to libnvdimm including support
    for issuing "address range scrub" commands, clarifying the optimal
    'sector size' of pmem devices, a clarification of the usage of the
    ACPI '_STA' (status) property for DIMM devices, and other minor
    fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6Nx7AAoJEB7SkWpmfYgCWyYQAI5ju6Gvw27RNFtPovHcZUf5
 JGnxXejI6/AqeTQ+IulgprxtEUCrXOHjCDA5dkjr1qvsoqK1qxug+vJHOZLgeW0R
 OwDtmdW4Qrgeqm+CPoxETkorJ8wDOc8mol81kTiMgeV3UqbYeeHIiTAmwe7VzZ0C
 nNdCRDm5g8dHCjTKcvK3rvozgyoNoWeBiHkPe76EbnxDICxCB5dak7XsVKNMIVFQ
 NuYlnw6IYN7+rMHgpgpRux38NtIW8VlYPWTmHExejc2mlioWMNBG/bmtwLyJ6M3e
 zliz4/cnonTMUaizZaVozyinTa65m7wcnpjK+vlyGV2deDZPJpDRvSOtB0lH30bR
 1gy+qrKzuGKpaN6thOISxFLLjmEeYwzYd7SvC9n118r32qShz+opN9XX0WmWSFlA
 sajE1ehm4M7s5pkMoa/dRnAyR8RUPu4RNINdQ/Z9jFfAOx+Q26rLdQXwf9+uqbEb
 bIeSQwOteK5vYYCstvpAcHSMlJAglzIX5UfZBvtEIJN7rlb0VhmGWfxAnTu+ktG1
 o9cqAt+J4146xHaFwj5duTsyKhWb8BL9+xqbKPNpXEp+PbLsrnE/+WkDLFD67jxz
 dgIoK60mGnVXp+16I2uMqYYDgAyO5zUdmM4OygOMnZNa1mxesjbDJC6Wat1Wsndn
 slsw6DkrWT60CRE42nbK
 =o57/
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "This update has successfully completed a 0day-kbuild run and has
  appeared in a linux-next release.  The changes outside of the typical
  drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
  removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
  the introduction of ZONE_DEVICE + devm_memremap_pages().

  Summary:

   - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
     mechanism for adding device-driver-discovered memory regions to the
     kernel's direct map.

     This facility is used by the pmem driver to enable pfn_to_page()
     operations on the page frames returned by DAX ('direct_access' in
     'struct block_device_operations').

     For now, the 'memmap' allocation for these "device" pages comes
     from "System RAM".  Support for allocating the memmap from device
     memory will arrive in a later kernel.

   - Introduce memremap() to replace usages of ioremap_cache() and
     ioremap_wt().  memremap() drops the __iomem annotation for these
     mappings to memory that do not have i/o side effects.  The
     replacement of ioremap_cache() with memremap() is limited to the
     pmem driver to ease merging the api change in v4.3.

     Completion of the conversion is targeted for v4.4.

   - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
     driver, update the VFS DAX implementation and PMEM api to provide
     persistence guarantees for kernel operations on a DAX mapping.

   - Convert the ACPI NFIT 'BLK' driver to map the block apertures as
     cacheable to improve performance.

   - Miscellaneous updates and fixes to libnvdimm including support for
     issuing "address range scrub" commands, clarifying the optimal
     'sector size' of pmem devices, a clarification of the usage of the
     ACPI '_STA' (status) property for DIMM devices, and other minor
     fixes"

* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
  libnvdimm, pmem: direct map legacy pmem by default
  libnvdimm, pmem: 'struct page' for pmem
  libnvdimm, pfn: 'struct page' provider infrastructure
  x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
  add devm_memremap_pages
  mm: ZONE_DEVICE for "device memory"
  mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
  dax: drop size parameter to ->direct_access()
  nd_blk: change aperture mapping from WC to WB
  nvdimm: change to use generic kvfree()
  pmem, dax: have direct_access use __pmem annotation
  dax: update I/O path to do proper PMEM flushing
  pmem: add copy_from_iter_pmem() and clear_pmem()
  pmem, x86: clean up conditional pmem includes
  pmem: remove layer when calling arch_has_wmb_pmem()
  pmem, x86: move x86 PMEM API to new pmem.h header
  libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
  pmem: switch to devm_ allocations
  devres: add devm_memremap
  libnvdimm, btt: write and validate parent_uuid
  ...
2015-09-08 14:35:59 -07:00
Dan Williams cb389b9c0e dax: drop size parameter to ->direct_access()
None of the implementations currently use it.  The common
bdev_direct_access() entry point handles all the size checks before
calling ->direct_access().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-27 19:40:58 -04:00
Ross Zwisler e2e05394e4 pmem, dax: have direct_access use __pmem annotation
Update the annotation for the kaddr pointer returned by direct_access()
so that it is a __pmem pointer.  This is consistent with the PMEM driver
and with how this direct_access() pointer is used in the DAX code.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-20 14:07:24 -04:00