Commit Graph

27 Commits

Author SHA1 Message Date
Stephen Hemminger 8d16b76421 [PATCH] hrtimer: export symbols
From: Stephen Hemminger <shemminger@osdl.org>

I want to use the hrtimer's in the netem (Network Emulator) qdisc.  But the
necessary symbols aren't exported for module use.

Also needed by SystemTap.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Stone, Joshua I" <joshua.i.stone@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31 16:27:11 -07:00
Chandra Seetharaman 83d722f7e1 [PATCH] Remove __devinit and __cpuinit from notifier_call definitions
Few of the notifier_chain_register() callers use __init in the definition
of notifier_call.  It is incorrect as the function definition should be
available after the initializations (they do not unregister them during
initializations).

This patch fixes all such usages to _not_ have the notifier_call __init
section.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-26 08:30:03 -07:00
Chandra Seetharaman 649bbaa484 [PATCH] Remove __devinitdata from notifier block definitions
Few of the notifier_chain_register() callers use __devinitdata in the
definition of notifier_block data structure.  It is incorrect as the
data structure should be available after the initializations (they do
not unregister them during initializations).

This was leading to an oops when notifier_chain_register() call is
invoked for those callback chains after initialization.

This patch fixes all such usages to _not_ have the notifier_block data
structure in the init data section.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-26 08:27:50 -07:00
Joe Korty 5ef37b1964 [PATCH] add cpu_relax to hrtimer_cancel
Add a cpu_relax() to the hand-coded spinwait in hrtimer_cancel().

Signed-off-by: Joe Korty <joe.korty@ccur.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:42 -07:00
Dimitri Sivanich 3055addadb [PATCH] hrtimer: call get_softirq_time() only when necessary in run_hrtimer_queue()
It seems that run_hrtimer_queue() is calling get_softirq_time() more
often than it needs to.

With this patch, it only calls get_softirq_time() if there's a
pending timer.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Thomas Gleixner 669d7868ae [PATCH] hrtimer: use generic sleeper for nanosleep
Replace the nanosleep private sleeper functionality by the generic hrtimer
sleeper.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Thomas Gleixner 00362e33f6 [PATCH] hrtimer: create generic sleeper
The removal of the data field in the hrtimer structure enforces the
embedding of the timer into another data structure.  nanosleep now uses a
private implementation of the most common used timer callback function
(simple task wakeup).

In order to avoid the reimplentation of such functionality all over the
place a generic hrtimer_sleeper functionality is created.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Roman Zippel 05cfb614dd [PATCH] hrtimers: remove data field
The nanosleep cleanup allows to remove the data field of hrtimer.  The
callback function can use container_of() to get it's own data.  Since the
hrtimer structure is anyway embedded in other structures, this adds no
overhead.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:03 -08:00
Roman Zippel df869b630d [PATCH] hrtimers: remove nsec_t typedef
nsec_t predates ktime_t and has mostly been superseded by it.  In the few
places that are left it's better to make it explicit that we're dealing with
64 bit values here.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:03 -08:00
Roman Zippel b75f7a51ca [PATCH] hrtimers: remove state field
Remove the state field and encode this information in the rb_node similiar to
normal timer.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:02 -08:00
Roman Zippel 432569bb9d [PATCH] hrtimers: simplify nanosleep
nanosleep is the only user of the expired state, so let it manage this itself,
which makes the hrtimer code a bit simpler.  The remaining time is also only
calculated if requested.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:02 -08:00
Roman Zippel 44f2147551 [PATCH] hrtimers: pass current time to hrtimer_forward()
Pass current time to hrtimer_forward().  This allows to use the softirq time
in the timer base when the forward function is called from the timer callback.
 Other places pass current time with a call to timer->base->get_time().

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:02 -08:00
Thomas Gleixner 92127c7a45 [PATCH] hrtimers: optimize softirq runqueues
The hrtimer softirq is called from the timer softirq every tick.  Retrieve the
current time from xtime and wall_to_monotonic instead of calling
base->get_time() for each timer base.  Store the time in the base structure
and provide a hook once clock source abstractions are in place and to keep the
code open for new base clocks.

Based on a patch from: Roman Zippel <zippel@linux-m68k.org>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:02 -08:00
Tony Lindgren 69239749e1 [PATCH] fix next_timer_interrupt() for hrtimer
Also from Thomas Gleixner <tglx@linutronix.de>

Function next_timer_interrupt() got broken with a recent patch
6ba1b91213 as sys_nanosleep() was moved to
hrtimer.  This broke things as next_timer_interrupt() did not check hrtimer
tree for next event.

Function next_timer_interrupt() is needed with dyntick (CONFIG_NO_IDLE_HZ,
VST) implementations, as the system can be in idle when next hrtimer event
was supposed to happen.  At least ARM and S390 currently use
next_timer_interrupt().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06 18:40:44 -08:00
Ingo Molnar 06027bdd27 [PATCH] hrtimer: round up relative start time on low-res arches
CONFIG_TIME_LOW_RES is a temporary way for architectures to signal that
they simply return xtime in do_gettimeoffset().  In this corner-case we
want to round up by resolution when starting a relative timer, to avoid
short timeouts.  This will go away with the GTOD framework.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 16:09:35 -08:00
Thomas Gleixner 66188fae3b [PATCH] hrtimers: add back lost credit lines
At some point we added credits to people who actively helped to bring
k/hr-timers along.  This was lost in the big code revamp.  Add it back.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:13 -08:00
George Anzinger 7978672c4d [PATCH] hrtimers: cleanups and simplifications
Clean up the interface to hrtimers by changing the init code to pass the mode
as well as the clock.  This allow the init code to select the correct base and
eliminates extra timer re-init code in posix-timers.  We also simplify the
restart interface nanosleep use.

Signed-off-by: George Anzinger <george@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:13 -08:00
akpm@osdl.org ff60a5dc4f [PATCH] hrtimers: fix posix-timer requeue race
From: Steven Rostedtrostedt@goodmis.org <rostedt@goodmis.org>

CPU0 expires a posix-timer and runs the callback function.  The signal is
queued.

After releasing the posix-timer lock and before returning to hrtimer_run_queue
CPU0 gets interrupted.  CPU1 delivers the queued signal and rearms the timer.
CPU0 comes back to hrtimer_run_queue and sets the timer state to expired.

The next modification of the timer can result in an oops, because the state
information is wrong.

Keep track of state = RUNNING and check if the state has been in the return
path of hrtimer_run_queue.  In case the state has been changed, ignore a
restart request and do not touch the state variable.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:13 -08:00
Ingo Molnar ea13dbc89c [PATCH] kernel/hrtimer.c sparse warning fix
fix the following sparse warning:

 kernel/hrtimer.c:665:34: warning: incorrect type in argument 2 (different address spaces)
 kernel/hrtimer.c:665:34:    expected void const *from
 kernel/hrtimer.c:665:34:    got struct timespec [noderef] *<noident><asn:1>
 kernel/hrtimer.c:664:2: warning: dereference of noderef expression

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:21:12 -08:00
Jonathan Corbet 8dca6f33f0 [PATCH] hrtimer comment tweak
Fix a comment which missed an update cycle somewhere.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 20:27:03 -08:00
Thomas Gleixner c9db4fa115 [hrtimer] Enforce resolution as lower limit of intervals
Roman Zippel pointed out that the missing lower limit of intervals
leads to an accounting error in the overrun count. Enforce the lower
limit of intervals to resolution in the timer forwarding code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-01-12 11:47:34 +01:00
Thomas Gleixner e2787630c1 [hrtimer] Change resolution storage to ktime_t format
Change the storage format of the per base resolution to ktime_t to
make it easier accessible in the hrtimers code.

Change the resolution from (NSEC_PER_SEC/HZ) to TICK_NSEC as Roman
pointed out. TICK_NSEC is closer to the real resolution.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-01-12 11:36:14 +01:00
Thomas Gleixner 288867ec5c [hrtimer] Remove listhead from hrtimer struct
The list_head in the hrtimer structure was introduced for easy access
to the first timer with the further extensions of real high resolution
timers in mind, but it turned out in the course of development that
it is not necessary for the standard use case. Remove the list head
and access the first expiry timer by a datafield in the timer base.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-01-12 11:25:54 +01:00
Matt Helsley 69778e325c [PATCH] Export ktime_get_ts()
This series removes the getnstimestamp() function from kernel/time.c in favor
of kernel/hrtimer.c's ktime_get_ts() function which currently does exactly the
same thing: retrieves a high-resolution (ns) timespec structure and performs
the wall_to_monotonic adjustment.

This patch:

Export ktime_get_ts() to be used as a timestamp function since it uses
getnstimefoday() and does the wall_to_monotonic adjustment.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:39 -08:00
Thomas Gleixner 6ba1b91213 [PATCH] hrtimer: switch sys_nanosleep to hrtimer
convert sys_nanosleep() to use hrtimer_nanosleep()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:38 -08:00
Thomas Gleixner 10c94ec16d [PATCH] hrtimer: create hrtimer nanosleep API
introduce the hrtimer_nanosleep() and hrtimer_nanosleep_real() APIs.  Not yet
used by any code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:38 -08:00
Thomas Gleixner c0a3132963 [PATCH] hrtimer: hrtimer core code
hrtimer subsystem core.  It is initialized at bootup and expired by the timer
interrupt, but is otherwise not utilized by any other subsystem yet.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:37 -08:00