Commit Graph

19 Commits

Author SHA1 Message Date
Masahiro Yamada b74c0cad3d riscv: drop unneeded -Wall addition
The top level Makefile adds -Wall globally:

  KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \

For riscv, I see two "-Wall" added for compiling each object.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17 10:25:10 +09:00
Masahiro Yamada bd305f259c kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.

The last users of the default are gone by the following commits:

- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
  arch/s390/configs/defconfig")

- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
  arch/alpha/configs/defconfig")

Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-09 15:08:18 +09:00
Christoph Hellwig 09afac77b6
riscv: remove CONFIG_RISCV_ISA_A
This option is always enabled, and not supporting the A extensions would
create a complete ABI trainwreck, so there is no point in even slightly
encouraging such an idea by keeping this unselectable code around.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-04-25 14:51:10 -07:00
Björn Töpel 2353ecc6f9 bpf, riscv: add BPF JIT for RV64G
This commit adds a BPF JIT for RV64G.

The JIT is a two-pass JIT, and has a dynamic prolog/epilogue (similar
to the MIPS64 BPF JIT) instead of static ones (e.g. x86_64).

At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES, which means that CONFIG_BPF_EVENTS is not
supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT,
BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and
BPF_PROG_TYPE_RAW_TRACEPOINT passes.

The implementation does not support "far branching" (>4KiB).

Test results:
  # modprobe test_bpf
  test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]

  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier
  ...
  Summary: 761 PASSED, 507 SKIPPED, 2 FAILED

Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.

CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier | grep -c 'NOTE.*unknown align'
  0

No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier | grep -c 'NOTE.*unknown align'
  59

The two failing test_verifier tests are:
  "ld_abs: vlan + abs, test 1"
  "ld_abs: jump around ld_abs"

This is due to that "far branching" involved in those tests.

All tests where done on QEMU (QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106)).

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:56:10 +01:00
Anup Patel c0fbcd9918
RISC-V: Build flat and compressed kernel images
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image

Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
booting flat and compressed kernel images. In case of Uboot, booting
Image or Image.gz is achieved using bootm command.

The flat and uncompressed kernel image (i.e. Image) is very useful
in pre-silicon developent and testing because we can create back-door
HEX files for RAM on FPGAs from Image.

Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-20 05:19:09 -08:00
David Abdurachmanov f157d411a9
riscv: add missing vdso_install target
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing
vdso_install target in arch/riscv/Makefile.

Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12 17:16:25 -08:00
Palmer Dabbelt 4e4101cfef
riscv: Add support to no-FPU systems
This patchset adds an option, CONFIG_FPU, to enable/disable floating-
point support within the kernel.  The kernel's new behavior will be as
follows:

* with CONFIG_FPU=y
  All FPU codes are reserved.  If no FPU is found during booting, a
  global flag will be set, and those functions will be bypassed with
  condition check to that flag.

* with CONFIG_FPU=n
  No floating-point instructions in kernel and all related settings
  are excluded.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:26 -07:00
Masahiro Yamada ee5928843a
riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
This becomes much neater in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:15 -07:00
Alan Kao 9671f70614
Allow to disable FPU support
FPU codes have been separated from common part in previous patches.
This patch add the CONFIG_FPU option and some stubs, so that a no-FPU
configuration is allowed.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao e8be530233
Cleanup ISA string setting
This patch cleanup the MARCH string passing to both compiler and
assembler.  Note that the CFLAGS should not contain "fd" before we
have mechnisms like kernel_fpu_begin/end in other architectures.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Masahiro Yamada d503ac531a kbuild: rename LDFLAGS to KBUILD_LDFLAGS
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24 08:22:08 +09:00
Linus Torvalds 1009aa1205 RISC-V Updates for the 4.19 Merge Window
This tag contains some major improvements to the RISC-V port, including
 the necessary interrupt controller and timer support to actually make it
 to userspace.  Support for three devices has been added:
 
 * Support for the ISA-mandated timers on RISC-V systems.
 * Support for the ISA-mandated first-level interrupt controller on
   RISC-V systems, which is handled as part of our core arch code because
   it's very small and tightly tied to the ISA.
 * Support for SiFive's platform-level interrupt controller, which talks
   to the actual devices.
 
 In addition to these new devices, there are a handful of cleanups all
 over the RISC-V tree:
 
 * Build fixes for various configurations
     * A fix to the vDSO build's makefile so it respects CFLAGS.
     * The addition of __lshrti3, a libgcc derived function necessary for
       some 32-bit configurations.
     * !SMP && PERF_EVENTS
 * Cleanups to the arch code to remove the remnants of old versions of
   the drivers that were just properly submitted.
     * Some dead code from the timer driver, most of which wasn't ever
       even compiled.
     * Cleanups of some interrupt #defines, which are now local to the
       interrupt handling code.
 * Fixes to ptrace(), which while not being sufficient to fully make GDB
   work are at least sufficient to get simple GDB tasks to work.
 * Early printk support via RISC-V's architecturally mandated SBI console
   device.
 * A fix to our early debug trap handler to ensure it's always aligned.
 
 These patches have all been through a fairly extensive review process,
 but as this enables a whole pile of functionality (ie, userspace) I'm
 confident we'll need to submit a few more patches.  The only concrete
 issues I know about are the sys_riscv_flush_icache patches, but as I
 managed to screw those up on Friday I figured it'd be best to let them
 bake another week.
 
 This tag boots a Fedora root filesystem on QEMU's master branch for me,
 and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on
 the HiFive Unleashed.
 
 Thanks to Christoph Hellwig and the other guys at WD for getting the new
 drivers in shape!
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAltx3HcTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQc7nEACh8NCRLyXHOAQefomb+BUx+DJXweau
 lhTiPexB7+3ZAT6FvL8BgHFu3qMsgZ8iI5pxIz7tap2WRTlakRABLes7c3xQPI4a
 3rDbZFE78lQDNY0Kj8iUpvYr0aOfMcC8aoD30qQHaWZVgYZvaZGD3Sar6VbTyaNe
 5F5lRaiAtrMmHNio/fXQvnMP83nc1Nxzc4q8VeRjmufc0CvGZUs3L2ZRVx1phwav
 VedQFsrNHlcyulBv9rQXzaeyvVn+FNKlu4c/9sI6xsGZofGZjOqub1vjURuEfTc5
 4AtdFMN0Xb2TYCK277Fr/FY/VEHGXCV+3hGc2U62hnpBtRgGERn7gQUimCJD5b+V
 gpXZGjtLvTXp9a4N6+ThC/oqvr72aLzInNap95MFK5xSMx/4AdCG7u63sd2qLtkL
 tlYho+Hd50ImIlUCTs6pfjzmgTMLW2huVJhDNx2lt9OUvNNYjTc4mjEK2WK8DUC7
 aUMcHYZMn3hJFNwvd5xTxLPua4ahhhYTyfzHwnMiND4ZjdUnxtrKNj46HjSPqMp9
 mgKOkv3G0a021gYODI/dweYI1SV2my814fQHZW4rcFYM2lLwrn2cPMMGezAJF9sR
 mbLHW6ZxJrtd9m+RZsJB9Z3QnBs68yIqTOBPRRFM5egwt9s9y+19HnBDVe1hj8/j
 OpmZ/qXCqQt+jA==
 =PfnC
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
2018-08-19 09:56:38 -07:00
Alex Guo a89757daf2
RISC-V: implement __lshrti3.
Signed-off-by: Alex Guo <xfguo@jlsemi.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13 08:31:30 -07:00
Masahiro Yamada ec33408a22 kbuild: remove redundant LDFLAGS clearing in arch/*/Makefile
Since commit ce99d0bf31 ("kbuild: clear LDFLAGS in the top Makefile"),
the top-level Makefile caters to this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
2018-07-19 08:40:27 +09:00
Luc Van Oostenryck 889d746edd
riscv: add riscv-specific predefines to CHECKFLAGS
RISC-V uses the macro __riscv_xlen, predefined by GCC, to
make the distinction between 32 or 64 bit code.

However, sparse doesn't know anything about this macro
which lead to wrong warnings and failures.

Fix this by adding a define of __riscv_xlen to CHECKFLAGS
and add one for __riscv too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11 09:03:43 -07:00
Palmer Dabbelt 7a8e7da422
RISC-V: Fixes to module loading
This cleans up the module support that was commited earlier to work with
what's actually emitted from our GCC port as it lands upstream.  Most of
the work here is adding new relocations to the kernel.

There's some limitations on module loading imposed by the kernel:

* The kernel doesn't support linker relaxation, which is necessary to
  support R_RISCV_ALIGN.  In order to get reliable module building
  you're going to need to a GCC that supports the new '-mno-relax',
  which IIRC isn't going to be out until 8.1.0.  It's somewhat unlikely
  that R_RISCV_ALIGN will appear in a module even without '-mno-relax'
  support, so issues shouldn't be common.

* There is no large code model for RISC-V, which means modules must be
  loaded within a 32-bit signed offset of the kernel.  We don't
  currently have any mechanism for ensuring this memory remains free or
  moving pages around, so issues here might be common.

I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
2018-04-02 20:43:14 -07:00
Zong Li ab1ef68e54
RISC-V: Add sections of PLT and GOT for kernel module
The address of external symbols will locate more than 32-bit offset
in 64-bit kernel with sv39 or sv48 virtual addressing.

Module loader emits the GOT and PLT entries for data symbols and
function symbols respectively.

The PLT entry is a trampoline code for jumping to the 64-bit
real address. The GOT entry is just the data symbol address.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:54 -07:00
Alan Kao a1d2a6b4ce
riscv/ftrace: Add RECORD_MCOUNT support
Now recordmcount.pl recognizes RISC-V object files. For the mechanism to
work, we have to disable the linker relaxation.

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 19:59:10 -07:00
Palmer Dabbelt fbe934d69e RISC-V: Build Infrastructure
This patch contains all the build infrastructure that actually enables
the RISC-V port.  This includes Makefiles, linker scripts, and Kconfig
files.  It also contains the only top-level change, which adds RISC-V to
the list of architectures that need a sed run to produce the ARCH
variable when building locally.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26 15:26:49 -07:00