Commit Graph

1036 Commits

Author SHA1 Message Date
Lars Ellenberg d2ec180c23 drbd: update Kconfig to match current dependencies
We no longer need the connector.
But we need libcrc32c.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:08:29 +01:00
Philipp Reisner ef86b77957 drbd: Fix drbdsetup wait-connect, wait-sync etc... commands
This was introduces when moving the code over from the 8.3 codebase
with commit 328e0f125b

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:04:34 +01:00
Philipp Reisner 13c76aba78 drbd: close race between drbd_set_role and drbd_connect
drbd_set_role(, R_PRIMARY, ) does the state change to Primary,
some more housekeeping, and possibly generates a new UUID set.

All of this holding the "state_mutex".

The connection handshake involves sending of various state information,
including the current data generation UUID set, and two connection
state changes from C_WF_CONNECTION to C_WF_REPORT_PARAMS further to
a number of different outcomes, resync being one of them.

If the connection handshake happens between the state change to Primary
and the generation of the new UUIDs, the resync decision based on the
old UUID set may be confused, depending on circumstances.

Make sure that, before we do the handshake, any promotion to Primary
role will either be complete (including the housekeeping stuff), or can
see, and serialize with, the ongoing handshake, based on the
"STATE_SENT" bit, which is set when we start the handshake, and cleared
only when we leave C_WF_REPORT_PARAMS again.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:00:33 +01:00
Lars Ellenberg 691631c065 drbd: respect no-md-barriers setting also when changed online via disk-options
We need to propagate the configuration into the flag bits,
or it won't be effective.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:00:04 +01:00
Philipp Reisner 298307ed1d drbd: Remove obsolete check
Smatch complained about it this redundanct check.

The check was introduced in 2006-09-13. On 2007-07-24 the body of the
function was enclosed by get_ldev()/put_ldev() reference counting.
Since then the check is useless and miss leading.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 12:09:55 +01:00
Jens Axboe 2cecb73098 drbd: fixup after wait_even_lock_irq() addition to generic code
Compiling drbd yields:

drivers/block/drbd/drbd_state.c: In function ‘_conn_request_state’:
drivers/block/drbd/drbd_state.c:1804:5: error: macro "wait_event_lock_irq" passed 4 arguments, but takes just 3
drivers/block/drbd/drbd_state.c:1801:3: error: ‘wait_event_lock_irq’ undeclared (first use in this function)
drivers/block/drbd/drbd_state.c:1801:3: note: each undeclared identifier is reported only once for each function it appears in
drivers/block/drbd/drbd_state.c: At top level:
drivers/block/drbd/drbd_state.c:1734:1: warning: ‘_conn_rq_cond’ defined but not used [-Wunused-function]

Due to drbd having copied the MD definition for wait_event_lock_irq()
as well. Kill them.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-30 21:20:15 +01:00
Akinobu Mita f1d6a328bb drbd: use copy_highpage
Use copy_highpage() to copy from one page to another.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:22:26 +01:00
Lars Ellenberg ed635cb067 drbd: if the replication link breaks during handshake, keep retrying
The 8.3.12 commit drbd: Bugfix for the connection behavior fixes a
"wasted established connection", if a former connection attempt failed
during its early stages.

However it opened a window for a regression, if a connection attempt
fails during its last stages.  The result was a terminated receiver
thread, that left behind the supposedly transient "C_UNCONNECTED" state.
Any later requests to change the connection state fail, as they wait for
the connection state to "stabilize".

Fix: short circuit and keep retrying to restablish a new connection,
if we don't reach C_WF_REPORT_PARAMS.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:22:19 +01:00
Jing Wang 063eacf88c drbd: check return of kmalloc in receive_uuids
Signed-off-by: Jing Wang <windsdaemon@gmail.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:22:10 +01:00
Philipp Reisner 986836503e Merge branch 'drbd-8.4_ed6' into for-3.8-drivers-drbd-8.4_ed6 2012-11-09 14:20:23 +01:00
Philipp Reisner 328e0f125b drbd: Broadcast sync progress no more often than once per second
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:43 +01:00
Philipp Reisner 518a4d53b2 drbd: don't try to clear bits once the disk has failed
If the disk has failed already, there is no point trying to change the
bitmap. drbd_set_out_of_sync() already had this safeguard,
time to add it to drbd_set_in_sync() as well.

This also prevents some warning messages, like
 FIXME asender in bm_change_bits_to, bitmap locked for 'detach' by worker
if our disk fails during resync, while there are some resync acks queued up.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:42 +01:00
Philipp Reisner fd0017c124 drbd: fix regression: potential NULL pointer dereference
recent commit
    drbd: always write bitmap on detach
introduced a bitmap writeout during detach,
which obviously needs some meta data device to write to.

Unfortunately, that same error path may be taken if we fail to attach,
e.g. due to UUID mismatch, after we changed state to D_ATTACHING,
but before the lower level device pointer is even assigned.

We need to test for presence of mdev->ldev.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:42 +01:00
Philipp Reisner 4035e4c2eb drbd: Fix clearing of MDF_AL_DISABLED
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:42 +01:00
Lars Ellenberg 42839f6536 drbd: log request sector offset and size for IO errors
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:41 +01:00
Lars Ellenberg edc9f5eb7a drbd: always write bitmap on detach
If we detach due to local read-error (which sets a bit in the bitmap),
stay Primary, and then re-attach (which re-reads the bitmap from disk),
we potentially lost the "out-of-sync" (or, "bad block") information in
the bitmap.

Always (try to) write out the changed bitmap pages before going diskless.

That way, we don't lose the bit for the bad block,
the next resync will fetch it from the peer, and rewrite
it locally, which may result in block reallocation in some
lower layer (or the hardware), and thereby "heal" the bad blocks.

If the bitmap writeout errors out as well, we will (again: try to)
mark the "we need a full sync" bit in our super block,
if it was a READ error; writes are covered by the activity log already.

If that superblock does not make it to disk either, we are sorry.

Maybe we just lost an entire disk or controller (or iSCSI connection),
and there actually are no bad blocks at all, so we don't need to
re-fetch from the peer, there is no "auto-healing" necessary.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:41 +01:00
Lars Ellenberg e34b677d09 drbd: wait for meta data IO completion even with failed disk, unless force-detached
The intention of force-detach is to be able to deal with a completely
unresponsive lower level IO stack, which does not even deliver error
completions anymore, but no completion at all.

In all other cases, we must still wait for the meta data IO completion.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:40 +01:00
Lars Ellenberg 8747d30af9 drbd: a few more GFP_KERNEL -> GFP_NOIO
This has not yet been observed, but conceivably, when using GFP_KERNEL
allocations from drbd_md_sync(), drbd_flush_after_epoch() or
receive_SyncParam(), we could trigger additional IO to our own device,
or an other device in a criss-cross setup, and end up in a local
deadlock, or potentially a distributed deadlock in a criss-cross setup
involving the peer blocked in a similar way waiting for us to make
progress.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:40 +01:00
Lars Ellenberg bc891c9ae3 drbd: fix potential deadlock during bitmap (re-)allocation
The former comment arguing that GFP_KERNEL was good enough was wrong: it
did not take resize into account at all, and assumed the only path
leading here was the normal attach on a still secondary device, so no
deadlock would be possible.

Both resize on a Primary, or attach on a diskless Primary,
could potentially deadlock.

drbd_bm_resize() is called while IO to the respective device is
suspended, so we must use GFP_NOIO to avoid potential deadlock.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:39 +01:00
Lars Ellenberg a506c13a4d drbd: use list_move_tail instead of list_del/list_add_tail
Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:39 +01:00
Philipp Reisner 1b6dd252e6 drbd: panic on delayed completion of aborted requests
"aborting" requests, or force-detaching the disk, is intended for
completely blocked/hung local backing devices which do no longer
complete requests at all, not even do error completions.  In this
situation, usually a hard-reset and failover is the only way out.

By "aborting", basically faking a local error-completion,
we allow for a more graceful swichover by cleanly migrating services.
Still the affected node has to be rebooted "soon".

By completing these requests, we allow the upper layers to re-use
the associated data pages.

If later the local backing device "recovers", and now DMAs some data
from disk into the original request pages, in the best case it will
just put random data into unused pages; but typically it will corrupt
meanwhile completely unrelated data, causing all sorts of damage.

Which means delayed successful completion,
especially for READ requests,
is a reason to panic().

We assume that a delayed *error* completion is OK,
though we still will complain noisily about it.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:39 +01:00
Philipp Reisner a3025a2737 drbd: Fix comparison of is_valid_transition()'s return code
is_valid_transition() might return SS_NOTHING_TO_DO.

The condition function _req_st_cond() returned SS_NOTHING_TO_DO, which
caused the wait_event to abort too early. Therefore drbd_req_state()
did not consume the next CL_ST_CHG_SUCCESS or SS_CW_FAILED_BY_PEER
causing serve disruption of the state machine logic...

Detaching from a single volue was one way to trigger this bug.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:38 +01:00
Philipp Reisner 1393b59f8c drbd: Remove duplicate code
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:38 +01:00
Lars Ellenberg 70f17b6bd1 drbd: differentiate early and later "postponing" of requests
We use the RQ_POSTPONED flag to mark a request for several reasons.

It may be a conflicting request in a dual-primary setup,
where conflict detection and resolution on the peer decided that
this request needs to be re-submitted, it needs to re-enter
drbd_make_request() to fix the data divergence caused by these
conflicting, partially overlapping, quasi-simultaneous requests.

In this case we need to mark the corresponding area as out-of-sync,
before we call drbd_al_complete_io().

We also use the RQ_POSTPONED flag to just "push back" a request,
before even processing it, if IO is suspended for some reason.
In this case, as this request was neither submitted nor sent yet,
we must not touch the bitmap.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:37 +01:00
Philipp Reisner 76590cd1fc drbd: Fix postponed requests
A postponed request might has RQ_IN_ACT_LOG already set, but
is POSTPONED before it gets something in the RQ_LOCAL_MASK
set. Up to now this caused a left-over active extent.

Fix that by only testing for the RQ_IN_ACT_LOG bit in drbd_req_destroy()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:37 +01:00
Philipp Reisner 19fffd7b03 drbd: Call drbd_md_sync() explicitly after a state change on the connection
Without this, the meta-data gets updates after 5 seconds by the
md_sync_timer. Better to do it immeditaly after a state change.

If the asender detects a network failure, it may take a bit until
the worker processes the according after-conn-state-change work item.

  The worker might be blocked in sending something, i.e. it
  takes until it gets into its timeout. That is 6 seconds by
  default which is longer than the 5 seconds of the md_sync_timer.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:11:08 +01:00
Philipp Reisner d76440181d drbd: Fix postponed requests
* Postponed requests should not set or clear out-of-sync marks
* When a request gets postponed we need to drop its reference
  mdev->local_cnt (put_ldev()).

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:24 +01:00
Philipp Reisner 4ae98b4db3 drbd: Imporve the error reporting of failed conn state changes
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:24 +01:00
Philipp Reisner 7970201177 drbd: Fix the way the STATE_SENT bit is cleared
With merging the commit
'drbd: Delay/reject other state changes while establishing a connection'
the condition check for clearing the flag was wrong.

Move the bit clearing to the __drbd_set_state() function
in order to have it already cleared for the other parts of
the function. I.e. clearing the susp_fen in the after_state_ch() function.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:23 +01:00
Philipp Reisner 07fc96197a drbd: Do not check aspects that are not subject to change in _conn_requests_state()
When _conn_requests_state() is used to change other parts of the state
than the connection, do not check for a valid connection transition.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:23 +01:00
Philipp Reisner 892fdd1aee drbd: Improve readability of IO resuming after freeze due to no data access
The previous way of doing the state change was also okay since the
state change on the susp flag gets propagated from the mdev
to the tconn.

Fortunately all this goes away in drbd-9.0

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:22 +01:00
Philipp Reisner 88f79ec4ae drbd: Fix IO resuming after connection was established while executing the fence handler
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:22 +01:00
Lars Ellenberg b792b655cd drbd: fix potential list_add corruption
If the md_sync_timer triggers a second time,
while the work queued during the first time is still pending,
this could result in list_add() of an already added item,
and corrupt the work item list.

This likely only triggered because of the erroneous
batch-dequeueing of work items fixed with
  drbd: dequeue single work items in wait_for_work()

Still, skip queueing if md_sync_work is already queued.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:21 +01:00
Lars Ellenberg bc317a9ecd drbd: dequeue single work items in wait_for_work()
As long as we still use drbd_queue_work_front(),
we must only dequeue the single first item during normal operation.

The comment in drbd_worker() even says so,
but bc8a5a1 drbd: remove struct drbd_tl_epoch objects (barrier works)
introduced the batch dequeueing again via list_splice_init() in
wait_for_work().

Change back to list_move() of the first item, if any.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:21 +01:00
Lars Ellenberg c02abda2b2 drbd: mutex_unlock "... must no be used in interrupt context"
Documentation of mutex_unlock says
we must not use it in interrupt context.
So do not call it while holding the spin_lock_irq,
but give up the spinlock temporarily.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:21 +01:00
Philipp Reisner c1fd29a11f drbd: Fix a race condition that can lead to a BUG()
If the preconditions for a state change change after the wait_event() we
might hit the BUG() statement in conn_set_state().

With holding the spin_lock while evaluating the condition AND until the
actual state change we ensure the the preconditions can not change anymore.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:20 +01:00
Lars Ellenberg 0ee98e2eb0 drbd: temporarily suspend io in drbd_adm_disk_opts
drbd_adm_disk_opts() does
	wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
	drbd_al_shrink(mdev);

If the device is very busy, this can take a very long time to succeed.
Fix this by temporarily suspending IO,
then quickly change the settings, and resume.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:20 +01:00
Lars Ellenberg 4eb9b3cba0 drbd: don't send out P_BARRIER with stale information
We must only send P_BARRIER for epochs we actually sent P_DATA in.

If we (re-)establish a connection, we reinitialized the
send.current_epoch_nr, but forgot to reset send.current_epoch_writes.

This could result in a spurious P_BARRIER with stale epoch information,
and a disconnect/reconnect cycle once the then "unexpected"
P_BARRIER_ACK is received:
  BAD! BarrierAck #28823 received, expected #28829!

Introduce re_init_if_first_write() and maybe_send_barrier() helpers,
and call them appropriately for read/write/set-out-of-sync requests.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:19 +01:00
Lars Ellenberg 08332d7325 drbd: properly call drbd_rs_cancel_all() in drbd_disconnected()
drbd_disconnected() is supposed to clear the resync lru cache,
by calling drbd_rs_cancel_all().

We must do so before we call drbd_flush_workqueue(), as at least the
callback w_restart_disk_io() may wait for resync progres, and would
otherwise deadlock.

drbd_finish_peer_reqs() may again populate that cache, which will
then potentially be stale after the next resync handshake and bitmap
exchange, we have to do it again after that.

A stale resync lru cache causes no harm but ugly messages like this:
 BAD! sector=196608s enr=6 rs_left=-256 rs_failed=0 count=256 cstate=SyncTarget

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:19 +01:00
Philipp Reisner 155522df5b drbd: Remove dead code
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:19 +01:00
Philipp Reisner b66623e33e drbd: Avoid NetworkFailure state during disconnect
Disconnecting is a cluster wide state change. In case the peer node agrees
to the state transition, it sends back the fact on the meta-data connection
and closes both sockets.

In case the node node that initiated the state transfer sees the closing
action on the data-socket, before the P_STATE_CHG_REPLY packet, it was
going into one of the network failure states.

At least with the fencing option set to something else thatn "dont-care",
the unclean shutdown of the connection causes a short IO freeze or
a fence operation.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:18 +01:00
Philipp Reisner 39a1aa7f49 drbd: Protect accesses to the uuid set with a spinlock
There is at least the worker context, the receiver context, the context of
receiving netlink packts.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:08:04 +01:00
Philipp Reisner fef45d297e drbd: Write all pages of the bitmap after an online resize
We need to write the whole bitmap after we moved the meta data
due to an online resize operation.

With the support for one peta byte devices bitmap IO was optimized
to only write out touched pages. This optimization must be turned
off when writing the bitmap after an online resize.

This issue was introduced with drbd-8.3.10.

The impact of this bug is that after an online resize, the next
resync could become larger than expected.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:51 +01:00
Philipp Reisner 5af2e8ce2b drbd: Fix completion of requests while the device is suspended
In various places (E.g. CONNECTION_LOST_WHILE_PENDING) the
RQ_COMPLETION_SUSP mask is passed in the clear set to mod_rq_state().

The issue was that it tried to clear the RQ_COMPLETION_SUSP bit
out of the state mask first, and eventuelly set it afterwards,
in the drbd_req_put_completion_ref() function.

Fixed that by moving the reference getting out of
drbd_req_put_completion_ref() into the mod_rq_state(), before the place
where the extra reference might be put.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:50 +01:00
Andreas Gruenbacher 715306f69d drbd: Don't unregister socket state_change callback from within the callback
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:50 +01:00
Lars Ellenberg eb12010e9a drbd: disambiguation, s/ERR_DISCARD/ERR_DISCARD_IMPOSSIBLE/
If for some reason (typically "split-brained" cluster manager)
drbd replica data has diverged, we can chose a victim,
and reconnect using "--discard-my-data", causing the victim
to become sync-target, fetching all changed blocks from the peer.

If we are Primary, we are potentially in use, and we refuse to
"roll back" changes to the data below the page cache and other users.

Rename the error symbol for this to ERR_DISCARD_IMPOSSIBLE.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:50 +01:00
Lars Ellenberg 427c0434fc drbd: disambiguation, s/DISCARD_CONCURRENT/RESOLVE_CONFLICTS/
We don't discard anything here, really.
We resolve conflicting, concurrent writes to overlapping data blocks.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:49 +01:00
Lars Ellenberg d4dabbe22d drbd: disambiguation, s/P_DISCARD_WRITE/P_SUPERSEDED/
To avoid confusion with REQ_DISCARD aka TRIM, rename our
"discard concurrent write acks" from P_DISCARD_WRITE to P_SUPERSEDED.

At the same time, rename the drbd request event DISCARD_WRITE
to CONFLICT_RESOLVED. It already triggers both successful completion
or restart of the request, depending on our RQ_POSTPONED flag.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:49 +01:00
Lars Ellenberg 232fd3f4a0 drbd: cleanup, drop unused struct
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:48 +01:00
Lars Ellenberg 46e21bbadb drbd: NEG_ACK does not imply a barrier-ack
Don't drop a request from the transfer log just because it was NEG_ACKED.
We need it around to be able to verify P_BARRIER_ACKs against the
transver log.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09 14:05:48 +01:00