Commit Graph

17 Commits

Author SHA1 Message Date
Bill Pemberton c0e61cb151 cpufreq: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 01:18:49 +01:00
Bill Pemberton ce2650d40d cpufreq: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 01:18:30 +01:00
Andreas Herrmann 29c4bcddaa cpufreq / powernow-k8: Change maintainer's email address
Change the Andreas' email address in drivers/cpufreq/powernow-k8.c.

Signed-off-by: Andreas Herrmann <herrmann.der.user@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-31 21:02:57 +01:00
Andreas Herrmann e4df1cbcc1 cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code
Commit 6889125b8b
(cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU)
causes powernow-k8 to trigger a preempt warning, e.g.:

  BUG: using smp_processor_id() in preemptible [00000000] code: cpufreq/3776
  caller is powernowk8_target+0x20/0x49
  Pid: 3776, comm: cpufreq Not tainted 3.6.0 #9
  Call Trace:
   [<ffffffff8125b447>] debug_smp_processor_id+0xc7/0xe0
   [<ffffffff814877e7>] powernowk8_target+0x20/0x49
   [<ffffffff81482b02>] __cpufreq_driver_target+0x82/0x8a
   [<ffffffff81484fc6>] cpufreq_governor_performance+0x4e/0x54
   [<ffffffff81482c50>] __cpufreq_governor+0x8c/0xc9
   [<ffffffff81482e6f>] __cpufreq_set_policy+0x1a9/0x21e
   [<ffffffff814839af>] store_scaling_governor+0x16f/0x19b
   [<ffffffff81484f16>] ? cpufreq_update_policy+0x124/0x124
   [<ffffffff8162b4a5>] ? _raw_spin_unlock_irqrestore+0x2c/0x49
   [<ffffffff81483640>] store+0x60/0x88
   [<ffffffff811708c0>] sysfs_write_file+0xf4/0x130
   [<ffffffff8111243b>] vfs_write+0xb5/0x151
   [<ffffffff811126e0>] sys_write+0x4a/0x71
   [<ffffffff816319a9>] system_call_fastpath+0x16/0x1b

Fix this by by always using work_on_cpu().

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-23 00:55:10 +02:00
Linus Torvalds 16642a2e7b Power management updates for 3.7-rc1
* Improved system suspend/resume and runtime PM handling for the SH TMU, CMT
   and MTU2 clock event devices (also used by ARM/shmobile).
 
 * Generic PM domains framework extensions related to cpuidle support and
   domain objects lookup using names.
 
 * ARM/shmobile power management updates including improved support for the
   SH7372's A4S power domain containing the CPU core.
 
 * cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre
   Przywara and Borislav Petkov.
 
 * cpu0 cpufreq driver from Shawn Guo.
 
 * cpufreq governor fixes related to the relaxing of limit from Michal Pecio.
 
 * OMAP cpufreq updates from Axel Lin and Richard Zhao.
 
 * cpuidle ladder governor fixes related to the disabling of states from
   Carsten Emde and me.
 
 * Runtime PM core updates related to the interactions with the system suspend
   core from Alan Stern and Kevin Hilman.
 
 * Wakeup sources modification allowing more helper functions to be called from
   interrupt context from John Stultz and additional diagnostic code from Todd
   Poynor.
 
 * System suspend error code path fix from Feng Hong.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJQa1rRAAoJEKhOf7ml8uNsYZ0P/2RZ71sgLWcUCfr0yHaiZeOd
 2GxEYSZ+9BZJHADgoAK/bHRTv8crm40Y2RkbaWbxPDRNuE4SutbvNTGTlJSAguSD
 yHkU/6AFC7u8Jwq+afsWIdGX7eHd78zPpj6EVtVtjHM903WDwbMU2vUz7tQ+fFa+
 ZZ7eydq9j0ec0OoH3UeNhet7JSOpT5BSLgjmIkHMBgIvTxNVDbkB31QUxnUxocxn
 k6S2wQaUSJJWGMLksRRNrhwLq+cGYwTsaOtG/KzRLH1raUyn33B5pcZr0aqhOkjg
 ClaCks3V8o3vRghSwOPB5aVXzjBKvM3UnSyJNIl+FeCeyWuwSNbkEFdA/e7oPuxG
 UsW6dcHiuVo6Ir4+zhd9+lN+/AcPTChO5b7lbU8qRF4ce04czWlUY/KzJjaM+YOE
 CKGq6eX9AHwFjE+h4+VcCXgmzcioiS8Y/CPz13u8N1y0zzwW+ftjb12K+7lVBEG1
 fhrePKHgLw3kJ9LqGpR+4vVur7C+rCf6WwCReTY2vXXVYJ+SuKWTRI4zAjTPXtHa
 i9dpMRASpF+ScRYBcgwIpv789WuHATFKqdBSinZUKBaxQZ5flJ2qIrfqN5VeAejh
 oQs/zZCdIuAtFKqVycQ0L42YxFNKgPFKQErUCSu3M5OuZLlLVLu7yQvIo2Xmo9qf
 Hcrpvo5K+w29YkiwGP9e
 =rbCk
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael J Wysocki:

 - Improved system suspend/resume and runtime PM handling for the SH
   TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile).

 - Generic PM domains framework extensions related to cpuidle support
   and domain objects lookup using names.

 - ARM/shmobile power management updates including improved support for
   the SH7372's A4S power domain containing the CPU core.

 - cpufreq changes related to AMD CPUs support from Matthew Garrett,
   Andre Przywara and Borislav Petkov.

 - cpu0 cpufreq driver from Shawn Guo.

 - cpufreq governor fixes related to the relaxing of limit from Michal
   Pecio.

 - OMAP cpufreq updates from Axel Lin and Richard Zhao.

 - cpuidle ladder governor fixes related to the disabling of states from
   Carsten Emde and me.

 - Runtime PM core updates related to the interactions with the system
   suspend core from Alan Stern and Kevin Hilman.

 - Wakeup sources modification allowing more helper functions to be
   called from interrupt context from John Stultz and additional
   diagnostic code from Todd Poynor.

 - System suspend error code path fix from Feng Hong.

Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the
workqueue fixes conflicting fairly badly with the removal of support for
hardware P-state chips.  The changes were independent but somewhat
intertwined.

* tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code"
  PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2
  cpuidle: rename function name "__cpuidle_register_driver", v2
  cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name
  cpuidle: remove some empty lines
  PM: Prevent runtime suspend during system resume
  PM QoS: Use spinlock in the per-device PM QoS constraints code
  PM / Sleep: use resume event when call dpm_resume_early
  cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure
  ACPI / processor: remove pointless variable initialization
  ACPI / processor: remove unused function parameter
  cpufreq: OMAP: remove loops_per_jiffy recalculate for smp
  sections: fix section conflicts in drivers/cpufreq
  cpufreq: conservative: update frequency when limits are relaxed
  cpufreq / ondemand: update frequency when limits are relaxed
  properly __init-annotate pm_sysrq_init()
  cpufreq: Add a generic cpufreq-cpu0 driver
  PM / OPP: Initialize OPP table from device tree
  ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
  cpufreq: Remove support for hardware P-state chips from powernow-k8
  ...
2012-10-02 18:32:35 -07:00
Tejun Heo 6889125b8b cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU
powernowk8_target() runs off a per-cpu work item and if the
cpufreq_policy->cpu is different from the current one, it migrates the
kworker to the target CPU by manipulating current->cpus_allowed.  The
function migrates the kworker back to the original CPU but this is
still broken.  Workqueue concurrency management requires the kworkers
to stay on the same CPU and powernowk8_target() ends up triggerring
BUG_ON(rq != this_rq()) in try_to_wake_up_local() if it contends on
fidvid_mutex and sleeps.

It is unclear why this bug is being reported now.  Duncan says it
appeared to be a regression of 3.6-rc1 and couldn't reproduce it on
3.5.  Bisection seemed to point to 63d95a91 "workqueue: use @pool
instead of @gcwq or @cpu where applicable" which is an non-functional
change.  Given that the reproduce case sometimes took upto days to
trigger, it's easy to be misled while bisecting.  Maybe something made
contention on fidvid_mutex more likely?  I don't know.

This patch fixes the bug by using work_on_cpu() instead if @pol->cpu
isn't the same as the current one.  The code assumes that
cpufreq_policy->cpu is kept online by the caller, which Rafael tells
me is the case.

stable: ed48ece27c ("workqueue: reimplement work_on_cpu() using
        system_wq") should be applied before this; otherwise, the
        behavior could be horrible.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Duncan <1i5t5.duncan@cox.net>
Tested-by: Duncan <1i5t5.duncan@cox.net>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47301
2012-09-19 10:15:01 -07:00
Matthew Garrett e1f0b8e9b0 cpufreq: Remove support for hardware P-state chips from powernow-k8
These chips are now supported by acpi-cpufreq, so we can delete all the
code handling them.

Andre: Tighten the deprecation warning message. Trigger load of
acpi-cpufreq and let the load of the module finally fail.
This avoids the problem of users ending up without any cpufreq support
after the transition.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09 22:05:30 +02:00
Andre Przywara a206095856 powernow-k8: delay info messages until initialization has succeeded
powernow-k8 is quite prematurely crying Hooray and outputs diagnostic
messages, although the actual initialization can still fail.
Since now we may have acpi-cpufreq already loaded, we move the
messages at the end of the init routine to avoid confusing output
if the loading of powernow-k8 should not succeed.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09 22:04:53 +02:00
Andre Przywara 034be8fd64 cpufreq: Add warning message to powernow-k8
cpufreq modules are often loaded from init scripts that assume that
all recent AMD systems will use powernow-k8.
To inform the user of the change of support and ease the transition
to acpi-cpufreq, emit a warning message.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09 22:04:41 +02:00
Borislav Petkov 56835e6cc0 cpufreq / powernow-k8: Fixup missing _PSS objects message
_PSS objects can also be missing if Cool'N'Quiet is disabled in the
BIOS. Add that to the FW_BUG message for the user to try before updating
her BIOS. Fix formatting while at it.

Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-05 00:50:26 +02:00
Andi Kleen fa8031aefe cpufreq: Add support for x86 cpuinfo auto loading v4
This marks all the x86 cpuinfo tables to the CPU specific device drivers,
to allow auto loading by udev. This should simplify the distribution
startup scripts for this greatly.

I didn't add MODULE_DEVICE_IDs to the centrino and p4-clockmod drivers,
because those probably shouldn't be auto loaded and the acpi driver
be used instead (not fully sure on that, would appreciate feedback)

The old nforce drivers autoload based on the PCI ID.

ACPI cpufreq is autoloaded in another patch.

v3: Autoload gx based on PCI IDs only. Remove cpu check (Dave Jones)
v4: Use newly introduce HW_PSTATE feature for powernow-k8 loading

Cc: Dave Jones <davej@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 16:49:06 -08:00
Andreas Herrmann b2bd68e1d5 [CPUFREQ] powernow-k8: Update copyright, maintainer and documentation information
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2012-01-06 10:10:53 -05:00
Andreas Herrmann a8eb28480e [CPUFREQ] powernow-k8: Fix indexing issue
The driver uses the pstate number from the status register as index in
its table of ACPI pstates (powernow_table). This is wrong as this is
not a 1-to-1 mapping.

For example we can have _PSS information to just utilize Pstate 0 and
Pstate 4, ie.

  powernow-k8: Core Performance Boosting: on.
  powernow-k8:    0 : pstate 0 (2200 MHz)
  powernow-k8:    1 : pstate 4 (1400 MHz)

In this example the driver's powernow_table has just 2 entries. Using
the pstate number (4) as index into this table is just plain wrong.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2012-01-06 10:10:53 -05:00
Andreas Herrmann 201bf0f129 [CPUFREQ] powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB
Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of
the paranoia check. (assuming that the ACPI Pstate information is
correct.)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2012-01-06 10:10:53 -05:00
Konrad Rzeszutek Wilk fbb5b89eab [CPUFREQ] powernow-k8: Don't try to transition if the pstate is incorrect
This patch augments the pstate transition code to error out
(instead of returning 0) when an incorrect pstate is provided.

Suggested-by: Borislav Petkov <bp@alien8.de>
CC: andre.przywara@amd.com
CC: Mark.Langsdorf@amd.com
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-16 16:31:13 -04:00
Konrad Rzeszutek Wilk a9d3d20680 [CPUFREQ] powernow-k8: Don't notify of successful transition if we failed (vid case).
Before this patch if we failed the vid transition would still try to
submit the "new" frequencies to cpufreq.
That is incorrect - also we could submit a non-existing frequency value
which would cause cpufreq to crash. The ultimate fix is in cpufreq
to deal with incorrect values, but this patch improves the error
recovery in the AMD powernowk8 driver.

The failure that was reported was as follows:

powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00)
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: fid 0xa (1800 MHz), vid 0xa
powernow-k8: fid 0xc (2000 MHz), vid 0x8
powernow-k8: fid 0xe (2200 MHz), vid 0x8
Marking TSC unstable due to cpufreq changes
powernow-k8: fid trans failed, fid 0x2, curr 0x0
BUG: unable to handle kernel paging request at ffff880807e07b78
IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b
...

And transition fails and data->currfid ends up with 0. Since
the machine does not support 800Mhz value when the calculation is
done ('find_khz_freq_from_fid(data->currfid);') it reports the
new frequency as 800000 which is bogus. This patch fixes
the issue during target setting.

The patch however does not fix the issue in 'powernowk8_cpu_init'
where the pol->cur can also be set with the 800000 value:

          pol->cur = find_khz_freq_from_fid(data->currfid);
  dprintk("policy current frequency %d kHz\n", pol->cur);

  /* min/max the cpu is capable of */
  if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {

The fix for that looks to update cpufreq_frequency_table_cpuinfo to
check pol->cur.... but that would cause an regression in how the
acpi-cpufreq driver works (it sets cpu->cur after calling
cpufreq_frequency_table_cpuinfo). Instead the fix will be to let
cpufreq gracefully handle bogus data (another patch).

Acked-by: Borislav Petkov <bp@alien8.de>
CC: andre.przywara@amd.com
CC: Mark.Langsdorf@amd.com
Reported-by: Tobias Diedrich <ranma+xen@tdiedrich.de>
Tested-by: Tobias Diedrich <ranma+xen@tdiedrich.de>
[v1: Rebased on v3.0-rc2, reduced patch to deal with vid case]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-16 16:31:13 -04:00
Dave Jones bb0a56ecc4 [CPUFREQ] Move x86 drivers to drivers/cpufreq/
Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-19 18:51:07 -04:00