Commit Graph

36 Commits

Author SHA1 Message Date
Chris Metcalf 10104a1ad6 arch/tile: break out the "csum a long" function to <asm/checksum.h>
This makes it available to the tilegx network driver.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:57 -04:00
Chris Metcalf d5d14ed6f2 arch/tile: Allow tilegx to build with either 16K or 64K page size
This change introduces new flags for the hv_install_context()
API that passes a page table pointer to the hypervisor.  Clients
can explicitly request 4K, 16K, or 64K small pages when they
install a new context.  In practice, the page size is fixed at
kernel compile time and the same size is always requested every
time a new page table is installed.

The <hv/hypervisor.h> header changes so that it provides more abstract
macros for managing "page" things like PFNs and page tables.  For
example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old
HV_PAGE_SIZE_SMALL.  The various PFN routines have been eliminated and
only PA- or PTFN-based ones remain (since PTFNs are always expressed
in fixed 2KB "page" size).  The page-table management macros are
renamed with a leading underscore and take page-size arguments with
the presumption that clients will use those macros in some single
place to provide the "real" macros they will use themselves.

I happened to notice the old hv_set_caching() API was totally broken
(it assumed 4KB pages) so I changed it so it would nominally work
correctly with other page sizes.

Tag modules with the page size so you can't load a module built with
a conflicting page size.  (And add a test for SMP while we're at it.)

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 12:48:24 -04:00
Chris Metcalf 47d632f9f8 arch/tile: optimize get_user/put_user and friends
Use direct load/store for the get_user/put_user.

Previously, we would call out to a helper routine that would do the
appropriate thing and then return, handling the possible exception
internally.  Now we inline the load or store, along with a "we succeeded"
indication in a register; if the load or store faults, we write a
"we failed" indication into the same register and then return to the
following instruction.  This is more efficient and gives us more compact
code, as well as being more in line with what other architectures do.

The special futex assembly source file for TILE-Gx also disappears in
this change; we just use the same inlining idiom there as well, putting
the appropriate atomic operations directly into futex_atomic_op_inuser()
(and thus into the FUTEX_WAIT function).

The underlying atomic copy_from_user, copy_to_user functions were
renamed using the (cryptic) x86 convention as copy_from_user_ll and
copy_to_user_ll.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 12:48:23 -04:00
Chris Metcalf 1efea40d41 arch/tile: support building big-endian kernel
The toolchain supports big-endian mode now, so add support for building
the kernel to run big-endian as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 12:48:22 -04:00
Chris Metcalf 54229ff359 arch/tile: fix finv_buffer_remote() for tilegx
There were some correctness issues with this code that are now fixed
with this change.  The change is likely less performant than it could
be, but it should no longer be vulnerable to any races with memory
operations on the memory network while invalidating a range of memory.
This code is run infrequently so performance isn't critical, but
correctness definitely is.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:53 -04:00
Chris Metcalf 918cbd38ae arch/tile: fix pointer cast in cacheflush.c
Pragmatically it couldn't be wrong to cast pointers to long to compare
them (since all kernel addresses are in the top half of VA space),
but it's more correct to cast to unsigned long.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:39 -04:00
Chris Metcalf 444eef1ba4 arch/tile: fix bug in delay_backoff()
We were carefully computing a value to use for the number of loops
to spin for, and then ignoring it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:15 -04:00
Chris Metcalf efb734d8ed arch/tile: make sure to build memcpy_user_64 without frame pointer
Add a comment explaining why this is important, and add a CFLAGS_REMOVE
clause to the Makefile to make sure it happens.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:12:42 -04:00
roel cf8c1dafe1 arch/tile: misplaced parens near likely
Parentheses were missing.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-12 15:32:18 -04:00
Chris Metcalf 3989efb770 arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.
The empty_zero_page[] export is required for ZERO_PAGE() module references.
The #includes are due to changes in implicit inclusion, and should of
course have been in the sources from the beginning.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-12-03 15:31:41 -05:00
Chris Metcalf f319d6e238 arch/tile: avoid exporting a symbol no longer used by gcc
An earlier Tilera compiler generated calls to an "__ll_mul"
function for long long multiplication.  Our libgcc supported that
as an alias for the normal __muldi3 routine, so we made it available
to kernel modules as well.  However, for a while now the compiler
has internally been generating only the standard __muldi3 symbol,
and the version we are giving back to the community does not have
the __ll_mul alias, so we are removing it from the kernel too.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-11-03 16:58:42 -04:00
Chris Metcalf d52104b29a tile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files
The 32-bit TILEPro support uses some #defines in <asm/atomic_32.h>
for atomic support routines in assembly.  To make this more explicit,
I've turned those includes into includes of <asm/atomic_32.h>, which
should hopefully make it clear that they shouldn't be bombed into
<linux/atomic.h> in any cleanups.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-10-13 08:25:01 -04:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Chris Metcalf 18aecc2b64 arch/tile: finish enabling support for TILE-Gx 64-bit chip
This support was partially present in the existing code (look for
"__tilegx__" ifdefs) but with this change you can build a working
kernel using the TILE-Gx toolchain and ARCH=tilegx.

Most of these files are new, generally adding a foo_64.c file
where previously there was just a foo_32.c file.

The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx,
using the existing SRCARCH mechanism in the top-level Makefile.

Changes to existing files:

- <asm/bitops.h> and <asm/bitops_32.h> changed to factor the
  include of <asm-generic/bitops/non-atomic.h> in the common header.

- <asm/compat.h> and arch/tile/kernel/compat.c changed to remove
  the "const" markers I had put on compat_sys_execve() when trying
  to match some recent similar changes to the non-compat execve.
  It turns out the compat version wasn't "upgraded" to use const.

- <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were
  previously included accidentally, with the 32-bit contents.  Now
  they have the proper 64-bit contents.

Finally, I had to hack the existing hacky drivers/input/input-compat.h
to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
2011-05-12 15:52:12 -04:00
Chris Metcalf dbb434214e arch/tile: disable GX prefetcher during cache flush
Otherwise, it's possible to end up with the prefetcher pulling
data into cache that the code believes has been flushed.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-04 14:40:46 -04:00
Chris Metcalf df29ccb6c0 arch/tile: allow nonatomic stores to interoperate with fast atomic syscalls
This semantic was already true for atomic operations within the kernel,
and this change makes it true for the fast atomic syscalls (__NR_cmpxchg
and __NR_atomic_update) as well.  Previously, user-space had to use
the fast atomic syscalls exclusively to update memory, since raw stores
could lose a race with the atomic update code even when the atomic update
hadn't actually modified the value.

With this change, we no longer write back the value to memory if it
hasn't changed.  This allows certain types of idioms in user space to
work as expected, e.g. "atomic exchange" to acquire a spinlock, followed
by a raw store of zero to release the lock.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-04 14:40:07 -04:00
Chris Metcalf 5b4787719f arch/tile: fix futex sanitization definition/prototype mismatch
Commit 8d7718aa08 changed "int"
to "u32" in the prototypes but not the definition.
I missed this when I saw the patch go by on LKML.

We cast "u32 *" to "int *" since we are tying into the underlying
atomics framework, and atomic_t uses int as its value type.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
2011-03-20 00:08:21 -04:00
Chris Metcalf 3c5ead52ed arch/tile: fix deadlock bugs in rwlock implementation
The first issue fixed in this patch is that pending rwlock write locks
could lock out new readers; this could cause a deadlock if a read lock was
held on cpu 1, a write lock was then attempted on cpu 2 and was pending,
and cpu 1 was interrupted and attempted to re-acquire a read lock.
The write lock code was modified to not lock out new readers.

The second issue fixed is that there was a narrow race window where a tns
instruction had been issued (setting the lock value to "1") and the store
instruction to reset the lock value correctly had not yet been issued.
In this case, if an interrupt occurred and the same cpu then tried to
manipulate the lock, it would find the lock value set to "1" and spin
forever, assuming some other cpu was partway through updating it.  The fix
is to enforce an interrupt critical section around the tns/store pair.

In addition, this change now arranges to always validate that after
a readlock we have not wrapped around the count of readers, which
is only eight bits.

Since these changes make the rwlock "fast path" code heavier weight,
I decided to move all the rwlock code all out of line, leaving only the
conventional spinlock code with fastpath inlines.  Since the read_lock
and read_trylock implementations ended up very similar, I just expressed
read_lock in terms of read_trylock.

As part of this change I also eliminate support for the now-obsolete
tns_atomic mode.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-10 16:10:41 -05:00
Chris Metcalf 76c567fbba arch/tile: support 4KB page size as well as 64KB
The Tilera architecture traditionally supports 64KB page sizes
to improve TLB utilization and improve performance when the
hardware is being used primarily to run a single application.

For more generic server scenarios, it can be beneficial to run
with 4KB page sizes, so this commit allows that to be specified
(by modifying the arch/tile/include/hv/pagesize.h header).

As part of this change, we also re-worked the PTE management
slightly so that PTE writes all go through a __set_pte() function
where we can do some additional validation.  The set_pte_order()
function was eliminated since the "order" argument wasn't being used.

One bug uncovered was in the PCI DMA code, which wasn't properly
flushing the specified range.  This was benign with 64KB pages,
but with 4KB pages we were getting some larger flushes wrong.

The per-cpu memory reservation code also needed updating to
conform with the newer percpu stuff; before it always chose 64KB,
and that was always correct, but with 4KB granularity we now have
to pay closer attention and reserve the amount of memory that will
be requested when the percpu code starts allocating.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-10 13:17:53 -05:00
Chris Metcalf 5fb682b064 arch/tile: fix some comments and whitespace
This is a grab bag of changes with no actual change to generated code.
This includes whitespace and comment typos, plus a couple of stale
comments being removed.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-10 13:14:03 -05:00
Chris Metcalf 00dce03134 arch/tile: export some additional module symbols
This adds a grab bag of symbols that have been missing for
various modules.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 16:21:12 -05:00
Chris Metcalf 63b7ca6b04 arch/tile: enhance existing finv_buffer_remote() routine
It now takes an additional argument so it can be used to
flush-and-invalidate pages that are cached using hash-for-home
as well those that are cached with coherence point on a single cpu.

This allows it to be used more widely for changing the coherence
point of arbitrary pages when necessary.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 16:21:06 -05:00
Chris Metcalf 6c4d112688 arch/tile: use extended assembly to inline __mb_incoherent()
This avoids having to maintain an additional separate assembly
file, and of course the inline is slightly more efficient as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 16:20:54 -05:00
Chris Metcalf 1337173148 arch/tile: fix __ndelay etc to work better
The current implementations of __ndelay and __udelay call a hypervisor
service to delay, but the hypervisor service isn't actually implemented
very well, and the consensus is that Linux should handle figuring this
out natively and not use a hypervisor service.

By converting nanoseconds to cycles, and then spinning until the
cycle counter reaches the desired cycle, we get several benefits:
first, we are sensitive to the actual clock speed; second, we use
less power by issuing a slow SPR read once every six cycles while
we delay; and third, we properly handle the case of an interrupt by
exiting at the target time rather than after some number of cycles.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 16:20:04 -05:00
Chris Metcalf 2cb8240071 arch/tile: catch up with section naming convention in 2.6.35
The convention changed to, e.g., ".data..page_aligned".  This commit
fixes the places in the tile architecture that were still using the
old convention.  One tile-specific section (.init.page) was dropped
in favor of just using an "aligned" attribute.

Sam Ravnborg <sam@ravnborg.org> pointed out __PAGE_ALIGNED_BSS, etc.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 16:18:52 -05:00
Chris Metcalf 3edabee2ed arch/tile: fix memchr() not to dereference memory for zero length
This change fixes a bug that memchr() will read the first word
of the source even if the length is zero.  Ironically, the code
was originally written with a test to avoid exactly this problem,
but to make the code conform to Linux coding standards with all
declarations preceding all statements, the first load from memory
was moved up above that test as the initial value for a variable.

The change just moves all the variable declarations to the top
of the file, with no initializers, so that the test can also be
at the top of the file.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-24 13:57:42 -05:00
Chris Metcalf 24f3f6b5ef arch/tile: fix rwlock so would-be write lockers don't block new readers
This avoids a deadlock in the IGMP code where one core gets a read
lock, another core starts trying to get a write lock (thus blocking
new readers), and then the first core tries to recursively re-acquire
the read lock.

We still try to preserve some degree of balance by giving priority
to additional write lockers that come along while the lock is held
for write, so they can all complete quickly and return the lock to
the readers.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-15 09:18:49 -05:00
Chris Metcalf 38a6f42669 arch/tile: complete migration to new kmap_atomic scheme
This change makes KM_TYPE_NR independent of the actual deprecated
list of km_type values, which are no longer used in tile code anywhere.
For now we leave it set to 8, allowing that many nested mappings,
and thus reserving 32MB of address space.

A few remaining places using KM_* values were cleaned up as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01 15:30:36 -04:00
Chris Metcalf 29507663df arch/tile: minor whitespace/naming changes for string support files
Our internal process shares memcpy, memset, etc., with libc, and
we did some minor tweaking as part of moving from uclibc to glibc,
which is now reflected in the kernel versions of these files.

There are no semantic changes in this commit, just whitespace
(memcpy_32.S now properly uses tabs), naming (memmove.c instead
of memmove_32.c, since TILE-Gx shares the file with TILEPro),
and a couple of other minor tweaks.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 15:38:54 -04:00
Chris Metcalf 13c9d5a630 arch/tile: properly export __mb_incoherent for modules
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-14 15:12:55 -04:00
Akinobu Mita de5bbad677 tile: replace some BUG_ON checks with BUILD_BUG_ON checks
Some BUG_ON checks can be detected at compile time rather than
at runtime.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-05 12:49:35 -04:00
Chris Metcalf c745a8a11f arch/tile: Various cleanups.
This change rolls up random cleanups not representing any actual bugs.

- Remove a stale CONFIG_ value from the default tile_defconfig
- Remove unused tns_atomic_xxx() family of methods from <asm/atomic.h>
- Optimize get_order() using Tile's "clz" instruction
- Fix a bad hypervisor upcall name (not currently used in Linux anyway)
- Use __copy_in_user_inatomic() name for consistency, and export it
- Export some additional hypervisor driver I/O upcalls and some homecache calls
- Remove the obfuscating MEMCPY_TEST_WH64 support code
- Other stray comment cleanups, #if 0 removal, etc.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13 08:52:19 -04:00
Chris Metcalf 0707ad30d1 arch/tile: Miscellaneous cleanup changes.
This commit is primarily changes caused by reviewing "sparse"
and "checkpatch" output on our sources, so is somewhat noisy, since
things like "printk() -> pr_err()" (or whatever) throughout the
codebase tend to get tedious to read.  Rather than trying to tease
apart precisely which things changed due to which type of code
review, this commit includes various cleanups in the code:

- sparse: Add declarations in headers for globals.
- sparse: Fix __user annotations.
- sparse: Using gfp_t consistently instead of int.
- sparse: removing functions not actually used.
- checkpatch: Clean up printk() warnings by using pr_info(), etc.;
  also avoid partial-line printks except in bootup code.
  - checkpatch: Use exposed structs rather than typedefs.
  - checkpatch: Change some C99 comments to C89 comments.

In addition, a couple of minor other changes are rolled in
to this commit:

- Add support for a "raise" instruction to cause SIGFPE, etc., to be raised.
- Remove some compat code that is unnecessary when we fully eliminate
  some of the deprecated syscalls from the generic syscall ABI.
- Update the tile_defconfig to reflect current config contents.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06 13:41:51 -04:00
Chris Metcalf c78095bd8c arch/tile: Split the icache flush code off to a generic <arch> header.
This code is used in other places in our system than in Linux, so
to share it we now implement it as an inline function in our low-level
<arch> headers, and instantiate it in one file in Linux's arch/tile/lib.
The file is now cacheflush.c and is C code rather than the strangely-named
and assembler-implemented __invalidate_icache.S.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06 13:41:46 -04:00
Chris Metcalf 2db0982781 arch/tile: Fix bug in support for atomic64_xx() ops.
This wasn't properly tested until the perf-event subsystem started
to get brought up under the tile architecture.

The bug caused bogus atomic64_cmpxchg() values to be returned,
among other things.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06 13:41:39 -04:00
Chris Metcalf 867e359b97 arch/tile: core support for Tilera 32-bit chips.
This change is the core kernel support for TILEPro and TILE64 chips.
No driver support (except the console driver) is included yet.

This includes the relevant Linux headers in asm/; the low-level
low-level "Tile architecture" headers in arch/, which are
shared with the hypervisor, etc., and are build-system agnostic;
and the relevant hypervisor headers in hv/.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-06-04 17:11:18 -04:00