Commit Graph

71 Commits

Author SHA1 Message Date
Filipe Manana e3b8a48585 Btrfs: fix reported number of inode blocks after buffered append writes
The patch from commit a7e3b975a0 ("Btrfs: fix reported number of inode
blocks") introduced a regression where if we do a buffered write starting
at position equal to or greater than the file's size and then stat(2) the
file before writeback is triggered, the number of used blocks does not
change (unless there's a prealloc/unwritten extent). Example:

  $ xfs_io -f -c "pwrite -S 0xab 0 64K" foobar
  $ du -h foobar
  0	foobar
  $ sync
  $ du -h foobar
  64K	foobar

The first version of that patch didn't had this regression and the second
version, which was the one committed, was made only to address some
performance regression detected by the intel test robots using fs_mark.

This fixes the regression by setting the new delaloc bit in the range, and
doing it at btrfs_dirty_pages() while setting the regular dealloc bit as
well, so that this way we set both bits at once avoiding navigation of the
inode's io tree twice. Doing it at btrfs_dirty_pages() is also the most
meaninful place, as we should set the new dellaloc bit when if we set the
delalloc bit, which happens only if we copied bytes into the pages at
__btrfs_buffered_write().

This was making some of LTP's du tests fail, which can be quickly run
using a command line like the following:

  $ ./runltp -q -p -l /ltp.log -f commands -s du -d /mnt

Fixes: a7e3b975a0 ("Btrfs: fix reported number of inode blocks")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-11-15 17:27:46 +01:00
Josef Bacik 8b62f87bad Btrfs: rework outstanding_extents
Right now we do a lot of weird hoops around outstanding_extents in order
to keep the extent count consistent.  This is because we logically
transfer the outstanding_extent count from the initial reservation
through the set_delalloc_bits.  This makes it pretty difficult to get a
handle on how and when we need to mess with outstanding_extents.

Fix this by revamping the rules of how we deal with outstanding_extents.
Now instead everybody that is holding on to a delalloc extent is
required to increase the outstanding extents count for itself.  This
means we'll have something like this

btrfs_delalloc_reserve_metadata	- outstanding_extents = 1
 btrfs_set_extent_delalloc	- outstanding_extents = 2
btrfs_release_delalloc_extents	- outstanding_extents = 1

for an initial file write.  Now take the append write where we extend an
existing delalloc range but still under the maximum extent size

btrfs_delalloc_reserve_metadata - outstanding_extents = 2
  btrfs_set_extent_delalloc
    btrfs_set_bit_hook		- outstanding_extents = 3
    btrfs_merge_extent_hook	- outstanding_extents = 2
btrfs_delalloc_release_extents	- outstanding_extnets = 1

In order to make the ordered extent transition we of course must now
make ordered extents carry their own outstanding_extent reservation, so
for cow_file_range we end up with

btrfs_add_ordered_extent	- outstanding_extents = 2
clear_extent_bit		- outstanding_extents = 1
btrfs_remove_ordered_extent	- outstanding_extents = 0

This makes all manipulations of outstanding_extents much more explicit.
Every successful call to btrfs_delalloc_reserve_metadata _must_ now be
combined with btrfs_release_delalloc_extents, even in the error case, as
that is the only function that actually modifies the
outstanding_extents counter.

The drawback to this is now we are much more likely to have transient
cases where outstanding_extents is much larger than it actually should
be.  This could happen before as we manipulated the delalloc bits, but
now it happens basically at every write.  This may put more pressure on
the ENOSPC flushing code, but I think making this code simpler is worth
the cost.  I have another change coming to mitigate this side-effect
somewhat.

I also added trace points for the counter manipulation.  These were used
by a bpf script I wrote to help track down leak issues.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-11-01 20:45:35 +01:00
Zygo Blaxell c995ab3cda btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents
The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and
offset (encoded as a single logical address) to a list of extent refs.
LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping
(extent ref -> extent bytenr and offset, or logical address).  These are
useful capabilities for programs that manipulate extents and extent
references from userspace (e.g. dedup and defrag utilities).

When the extents are uncompressed (and not encrypted and not other),
check_extent_in_eb performs filtering of the extent refs to remove any
extent refs which do not contain the same extent offset as the 'logical'
parameter's extent offset.  This prevents LOGICAL_INO from returning
references to more than a single block.

To find the set of extent references to an uncompressed extent from [a, b),
userspace has to run a loop like this pseudocode:

	for (i = a; i < b; ++i)
		extent_ref_set += LOGICAL_INO(i);

At each iteration of the loop (up to 32768 iterations for a 128M extent),
data we are interested in is collected in the kernel, then deleted by
the filter in check_extent_in_eb.

When the extents are compressed (or encrypted or other), the 'logical'
parameter must be an extent bytenr (the 'a' parameter in the loop).
No filtering by extent offset is done (or possible?) so the result is
the complete set of extent refs for the entire extent.  This removes
the need for the loop, since we get all the extent refs in one call.

Add an 'ignore_offset' argument to iterate_inodes_from_logical,
[...several levels of function call graph...], and check_extent_in_eb, so
that we can disable the extent offset filtering for uncompressed extents.
This flag can be set by an improved version of the LOGICAL_INO ioctl to
get either behavior as desired.

There is no functional change in this patch.  The new flag is always
false.

Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-11-01 20:45:34 +01:00
Nikolay Borisov d4417e2255 btrfs: Replace opencoded sizes with their symbolic constants
Currently btrfs' code uses a mix of opencoded sizes and defines from sizes.h.
Let's unifiy the code base to always use the symbolic constants. No functional
changes

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-30 12:28:01 +01:00
Christophe JAILLET 9ca2e97fa3 btrfs: tests: Fix a memory leak in error handling path in 'run_test()'
If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-30 12:27:56 +01:00
Nikolay Borisov 23d1f73788 btrfs: remove unused sectorsize member
The sectorsize member of btrfs_block_group_cache is unused. So remove it, this
reduces the number of holes in the struct.

With patch:
/* size: 856, cachelines: 14, members: 40 */
/* sum members: 837, holes: 4, sum holes: 19 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 24 bytes */

Without patch:
/* size: 864, cachelines: 14, members: 41 */
/* sum members: 841, holes: 5, sum holes: 23 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 32 bytes */

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16 14:19:53 +02:00
Josef Bacik c6100a4b4e Btrfs: replace tree->mapping with tree->private_data
For extent_io tree's we have carried the address_mapping of the inode
around in the io tree in order to pull the inode back out for calling
into various tree ops hooks.  This works fine when everything that has
an extent_io_tree has an inode.  But we are going to remove the
btree_inode, so we need to change this.  Instead just have a generic
void * for private data that we can initialize with, and have all the
tree ops use that instead.  This had a lot of cascading changes but
should be relatively straightforward.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor reordering of the callback prototypes ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-06-19 18:25:58 +02:00
David Sterba f486135eba btrfs: remove unused qgroup members from btrfs_trans_handle
The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562d), there's no substitute for
assert_qgroups_uptodate so it's removed as well.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Nikolay Borisov fc4f21b1d8 btrfs: Make get_extent_t take btrfs_inode
In addition to changing the signature, this patch also switches
all the functions which are used as an argument to also take btrfs_inode.
Namely those are: btrfs_get_extent and btrfs_get_extent_filemap.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov dcdbc059f0 btrfs: Make btrfs_drop_extent_cache take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:08 +01:00
Linus Torvalds 087a76d390 Merge branch 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "Jeff Mahoney and Dave Sterba have a really nice set of cleanups in
  here, and Christoph pitched in corrections/improvements to make btrfs
  use proper helpers for bio walking instead of doing it by hand.

  There are some key fixes as well, including some long standing bugs
  that took forever to track down in btrfs_drop_extents and during
  balance"

* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (77 commits)
  btrfs: limit async_work allocation and worker func duration
  Revert "Btrfs: adjust len of writes if following a preallocated extent"
  Btrfs: don't WARN() in btrfs_transaction_abort() for IO errors
  btrfs: opencode chunk locking, remove helpers
  btrfs: remove root parameter from transaction commit/end routines
  btrfs: split btrfs_wait_marked_extents into normal and tree log functions
  btrfs: take an fs_info directly when the root is not used otherwise
  btrfs: simplify btrfs_wait_cache_io prototype
  btrfs: convert extent-tree tracepoints to use fs_info
  btrfs: root->fs_info cleanup, access fs_info->delayed_root directly
  btrfs: root->fs_info cleanup, add fs_info convenience variables
  btrfs: root->fs_info cleanup, update_block_group{,flags}
  btrfs: root->fs_info cleanup, lock/unlock_chunks
  btrfs: root->fs_info cleanup, btrfs_calc_{trans,trunc}_metadata_size
  btrfs: pull node/sector/stripe sizes out of root and into fs_info
  btrfs: root->fs_info cleanup, io_ctl_init
  btrfs: root->fs_info cleanup, use fs_info->dev_root everywhere
  btrfs: struct reada_control.root -> reada_control.fs_info
  btrfs: struct btrfsic_state->root should be an fs_info
  btrfs: alloc_reserved_file_extent trace point should use extent_root
  ...
2016-12-16 10:53:01 -08:00
Matthew Wilcox 148deab223 radix-tree: improve multiorder iterators
This fixes several interlinked problems with the iterators in the
presence of multiorder entries.

1. radix_tree_iter_next() would only advance by one slot, which would
   result in the iterators returning the same entry more than once if
   there were sibling entries.

2. radix_tree_next_slot() could return an internal pointer instead of
   a user pointer if a tagged multiorder entry was immediately followed by
   an entry of lower order.

3. radix_tree_next_slot() expanded to a lot more code than it used to
   when multiorder support was compiled in.  And I wasn't comfortable with
   entry_to_node() being in a header file.

Fixing radix_tree_iter_next() for the presence of sibling entries
necessarily involves examining the contents of the radix tree, so we now
need to pass 'slot' to radix_tree_iter_next(), and we need to change the
calling convention so it is called *before* dropping the lock which
protects the tree.  Also rename it to radix_tree_iter_resume(), as some
people thought it was necessary to call radix_tree_iter_next() each time
around the loop.

radix_tree_next_slot() becomes closer to how it looked before multiorder
support was introduced.  It only checks to see if the next entry in the
chunk is a sibling entry or a pointer to a node; this should be rare
enough that handling this case out of line is not a performance impact
(and such impact is amortised by the fact that the entry we just
processed was a multiorder entry).  Also, radix_tree_next_slot() used to
force a new chunk lookup for untagged entries, which is more expensive
than the out of line sibling entry skipping.

Link: http://lkml.kernel.org/r/1480369871-5271-55-git-send-email-mawilcox@linuxonhyperv.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:10 -08:00
Matthew Wilcox b35df27a39 btrfs: fix race in btrfs_free_dummy_fs_info()
We drop the lock which protects the radix tree, so we must call
radix_tree_iter_next() in order to avoid a modification to the tree
invalidating the iterator state.

Link: http://lkml.kernel.org/r/1480369871-5271-54-git-send-email-mawilcox@linuxonhyperv.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:10 -08:00
Jeff Mahoney da17066c40 btrfs: pull node/sector/stripe sizes out of root and into fs_info
We track the node sizes per-root, but they never vary from the values
in the superblock.  This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06 16:06:58 +01:00
David Sterba b159fa2808 btrfs: remove constant parameter to memset_extent_buffer and rename it
The only memset we do is to 0, so sink the parameter to the function and
simplify all calls. Rename the function to reflect the behaviour.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-30 13:45:17 +01:00
Chris Mason d9ed71e545 Merge branch 'fst-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.9
Signed-off-by: Chris Mason <clm@fb.com>
2016-10-12 13:16:00 -07:00
David Sterba 0e6757859e btrfs: tests: uninline member definitions in free_space_extent
The recommended way is to put all members on separate lines.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-03 18:52:15 +02:00
David Sterba d2d9ac6aae btrfs: tests: constify free space extent specs
We don't change the given extent ranges, mark them const to catch
accidental changes.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-03 18:52:15 +02:00
Omar Sandoval 781e3bcf0e Btrfs: expand free space tree sanity tests to catch endianness bug
The free space tree format conversion functions were broken on
big-endian systems, but the sanity tests didn't catch it because all of
the operations were aligned to multiple words. This was meant to catch
any bugs in the extent buffer code's handling of high memory, but it
ended up hiding the endianness bug. Expand the tests to do both
sector-aligned and page-aligned operations.

Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-03 18:52:14 +02:00
Omar Sandoval 9426ce754f Btrfs: fix extent buffer bitmap tests on big-endian systems
The in-memory bitmap code manipulates words and is therefore sensitive
to endianness, while the extent buffer bitmap code addresses bytes and
is byte-order agnostic. Because the byte addressing of the extent buffer
bitmaps is equivalent to a little-endian in-memory bitmap, the extent
buffer bitmap tests fail on big-endian systems.

34b3e6c92a ("Btrfs: self-tests: Fix extent buffer bitmap test fail on
BE system") worked around another endianness bug in the tests but missed
this one because ed9e4afdb0 ("Btrfs: self-tests: Execute page
straddling test only when nodesize < PAGE_SIZE") disables this part of
the test on ppc64. That change lost the original meaning of the test,
however. We really want to test that an equivalent series of operations
using the in-memory bitmap API and the extent buffer bitmap API produces
equivalent results.

To fix this, don't use memcmp_extent_buffer() or write_extent_buffer();
do everything bit-by-bit.

Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-10-03 18:52:14 +02:00
Josef Bacik afcdd129e0 Btrfs: add a flags field to btrfs_fs_info
We have a lot of random ints in btrfs_fs_info that can be put into flags.  This
is mostly equivalent with the exception of how we deal with quota going on or
off, now instead we set a flag when we are turning it on or off and deal with
that appropriately, rather than just having a pending state that the current
quota_enabled gets set to.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26 17:59:49 +02:00
Qu Wenruo ba8b04c1d4 btrfs: extend btrfs_set_extent_delalloc and its friends to support in-band dedupe and subpage size patchset
Extend btrfs_set_extent_delalloc() and extent_clear_unlock_delalloc()
parameters for both in-band dedupe and subpage sector size patchset.

This should reduce conflict of both patchset and the effort to rebase
them.

Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26 17:59:49 +02:00
Jeff Mahoney 7c0260ee09 btrfs: tests, require fs_info for root
This allows the upcoming patchset to push nodesize and sectorsize into
fs_info.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26 13:53:18 +02:00
Jeff Mahoney 8632daae40 btrfs: tests, move initialization into tests/
We have all these stubs that only exist because they're called from
btrfs_run_sanity_tests, which is a static inside super.c.  Let's just
move it all into tests/btrfs-tests.c and only have one stub.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26 13:53:17 +02:00
Wei Yongjun 04e1b65af2 Btrfs: fix error return code in btrfs_init_test_fs()
Fix to return a negative error code from the kern_mount() error handling
case instead of 0(ret is set to 0 by register_filesystem), as done
elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-06-23 10:44:39 -07:00
Feifei Xu 34b3e6c92a Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
In __test_eb_bitmaps(), we write random data to a bitmap. Then copy
the bitmap to another bitmap that resides inside an extent buffer.
Later we verify the values of corresponding bits in the bitmap and the
bitmap inside the extent buffer. However, extent_buffer_test_bit()
reads in byte granularity while test_bit() reads in unsigned long
granularity. Hence we end up comparing wrong bits on big-endian
systems such as ppc64. This commit fixes the issue by reading the
bitmap in byte granularity.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-06 17:17:12 +02:00
Feifei Xu 36b3dc05b4 Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
With 64K sectorsize, 1G sized block group cannot span across bitmaps.
To execute test_bitmaps() function, this commit allocates
"BITS_PER_BITMAP * sectorsize + PAGE_SIZE" sized block group.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-06 17:17:12 +02:00
Feifei Xu ef9f2db365 Btrfs: self-tests: Use macros instead of constants and add missing newline
This commit replaces numerical constants with appropriate
preprocessor macros.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-06 17:17:12 +02:00
Feifei Xu ed9e4afdb0 Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
On ppc64, PAGE_SIZE is 64k which is same as BTRFS_MAX_METADATA_BLOCKSIZE.
In such a scenario, we will never be able to have an extent buffer
containing more than one page. Hence in such cases this commit does not
execute the page straddling tests.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-06 17:17:11 +02:00
Feifei Xu b9ef22dedd Btrfs: self-tests: Support non-4k page size
self-tests code assumes 4k as the sectorsize and nodesize. This commit
fix hardcoded 4K. Enables the self-tests code to be executed on non-4k
page sized systems (e.g. ppc64).

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-02 19:23:14 +02:00
Feifei Xu 0ef6447a3d Btrfs: Fix integer overflow when calculating bytes_per_bitmap
On ppc64, bytes_per_bitmap will be (65536*8*65536). Hence append UL to
fix integer overflow.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-02 19:22:49 +02:00
Nicholas D Steeves 0132761017 btrfs: fix string and comment grammatical issues and typos
Signed-off-by: Nicholas D Steeves <nsteeves@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-25 22:35:14 +02:00
David Sterba 7cd8c7527c btrfs: sink gfp parameter to set_extent_delalloc
Callers pass GFP_NOFS and tests pass GFP_KERNEL, but using NOFS there
does not hurt. No need to pass the flags around.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29 11:01:47 +02:00
David Sterba 91166212e0 btrfs: sink gfp parameter to clear_extent_bits
Callers pass GFP_NOFS and GFP_KERNEL. No need to pass the flags around.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29 11:01:47 +02:00
Kirill A. Shutemov ea1754a084 mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
Mostly direct substitution with occasional adjustment or removing
outdated comments.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Linus Torvalds 968f3e374f Merge branch 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "We have a good sized cleanup of our internal read ahead code, and the
  first series of commits from Chandan to enable PAGE_SIZE > sectorsize

  Otherwise, it's a normal series of cleanups and fixes, with many
  thanks to Dave Sterba for doing most of the patch wrangling this time"

* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits)
  btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums
  btrfs: Fix misspellings in comments.
  btrfs: Print Warning only if ENOSPC_DEBUG is enabled
  btrfs: scrub: silence an uninitialized variable warning
  btrfs: move btrfs_compression_type to compression.h
  btrfs: rename btrfs_print_info to btrfs_print_mod_info
  Btrfs: Show a warning message if one of objectid reaches its highest value
  Documentation: btrfs: remove usage specific information
  btrfs: use kbasename in btrfsic_mount
  Btrfs: do not collect ordered extents when logging that inode exists
  Btrfs: fix race when checking if we can skip fsync'ing an inode
  Btrfs: fix listxattrs not listing all xattrs packed in the same item
  Btrfs: fix deadlock between direct IO reads and buffered writes
  Btrfs: fix extent_same allowing destination offset beyond i_size
  Btrfs: fix file loss on log replay after renaming a file and fsync
  Btrfs: fix unreplayable log after snapshot delete + parent dir fsync
  Btrfs: fix lockdep deadlock warning due to dev_replace
  btrfs: drop unused argument in btrfs_ioctl_get_supported_features
  btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls
  btrfs: change max_inline default to 2048
  ...
2016-03-21 18:12:42 -07:00
Matthew Wilcox c28f242063 btrfs: use radix_tree_iter_retry()
Even though this is a 'can't happen' situation, use the new
radix_tree_iter_retry() pattern to eliminate a goto.

[akpm@linux-foundation.org: fix btrfs build]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Anand Jain ebb8765b2d btrfs: move btrfs_compression_type to compression.h
So that its better organized.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:12:46 +01:00
Kinglong Mee aa66b0bb08 btrfs: fix memory leak of fs_info in block group cache
When starting up linux with btrfs filesystem, I got many memory leak
messages by kmemleak as,

unreferenced object 0xffff880066882000 (size 4096):
  comm "modprobe", pid 730, jiffies 4294690024 (age 196.599s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8174d52e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811d09aa>] kmem_cache_alloc_trace+0xea/0x1e0
    [<ffffffffa03620fb>] btrfs_alloc_dummy_fs_info+0x6b/0x2a0 [btrfs]
    [<ffffffffa03624fc>] btrfs_alloc_dummy_block_group+0x5c/0x120 [btrfs]
    [<ffffffffa0360aa9>] btrfs_test_free_space_cache+0x39/0xed0 [btrfs]
    [<ffffffffa03b5a74>] trace_raw_output_xfs_attr_class+0x54/0xe0 [xfs]
    [<ffffffff81002122>] do_one_initcall+0xb2/0x1f0
    [<ffffffff811765aa>] do_init_module+0x5e/0x1e9
    [<ffffffff810fec09>] load_module+0x20a9/0x2690
    [<ffffffff810ff439>] SyS_finit_module+0xb9/0xf0
    [<ffffffff81757daf>] entry_SYSCALL_64_fastpath+0x12/0x76
    [<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff8800573f8000 (size 10256):
  comm "modprobe", pid 730, jiffies 4294690185 (age 196.460s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8174d52e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8119ca6e>] kmalloc_order+0x5e/0x70
    [<ffffffff8119caa4>] kmalloc_order_trace+0x24/0x90
    [<ffffffffa03620b3>] btrfs_alloc_dummy_fs_info+0x23/0x2a0 [btrfs]
    [<ffffffffa03624fc>] btrfs_alloc_dummy_block_group+0x5c/0x120 [btrfs]
    [<ffffffffa036603d>] run_test+0xfd/0x320 [btrfs]
    [<ffffffffa0366f34>] btrfs_test_free_space_tree+0x94/0xee [btrfs]
    [<ffffffffa03b5aab>] trace_raw_output_xfs_attr_class+0x8b/0xe0 [xfs]
    [<ffffffff81002122>] do_one_initcall+0xb2/0x1f0
    [<ffffffff811765aa>] do_init_module+0x5e/0x1e9
    [<ffffffff810fec09>] load_module+0x20a9/0x2690
    [<ffffffff810ff439>] SyS_finit_module+0xb9/0xf0
    [<ffffffff81757daf>] entry_SYSCALL_64_fastpath+0x12/0x76
    [<ffffffffffffffff>] 0xffffffffffffffff

This patch lets btrfs using fs_info stored in btrfs_root for
block group cache directly without allocating a new one.

Fixes: d0bd456074 ("Btrfs: add fragment=* debug mount option")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-18 13:28:24 +01:00
David Sterba 8cce83ba50 btrfs: tests: switch to GFP_KERNEL
There's no reason to do GFP_NOFS in tests, it's not data-heavy and
memory allocation failures would affect only developers or testers.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-22 10:28:24 +01:00
Chris Mason b28cf57246 Merge branch 'misc-cleanups-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
Signed-off-by: Chris Mason <clm@fb.com>
2016-01-11 06:08:37 -08:00
Chris Mason a3058101c1 Merge branch 'misc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5 2016-01-11 05:59:32 -08:00
David Sterba 20e5506baf btrfs: constify remaining structs with function pointers
* struct extent_io_ops
* struct btrfs_free_space_op

Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07 15:01:14 +01:00
David Sterba 28f0779a3f btrfs tests: replace whole ops structure for free space tests
Preparatory work for making btrfs_free_space_op constant. In
test_steal_space_from_bitmap_to_extent, we substitute use_bitmap with
own version thus preventing constification. We can rework it so we
replace the whole structure with the correct function pointers.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07 15:01:14 +01:00
Byongho Lee ee22184b53 Btrfs: use linux/sizes.h to represent constants
We use many constants to represent size and offset value.  And to make
code readable we use '256 * 1024 * 1024' instead of '268435456' to
represent '256MB'.  However we can make far more readable with 'SZ_256MB'
which is defined in the 'linux/sizes.h'.

So this patch replaces 'xxx * 1024 * 1024' kind of expression with
single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is
not a power of 2. And I haven't touched to '4096' & '8192' because it's
more intuitive than 'SZ_4KB' & 'SZ_8KB'.

Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07 14:38:02 +01:00
Chris Mason f7d3d2f99e Merge branch 'freespace-tree' into for-linus-4.5
Signed-off-by: Chris Mason <clm@fb.com>
2015-12-18 11:11:10 -08:00
Omar Sandoval 7c55ee0c4a Btrfs: add free space tree sanity tests
This tests the operations on the free space tree trying to excercise all
of the main cases for both formats. Between this and xfstests, the free
space tree should have pretty good coverage.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-12-17 12:16:47 -08:00
Omar Sandoval 0f3312295d Btrfs: add extent buffer bitmap sanity tests
Sanity test the extent buffer bitmap operations (test, set, and clear)
against the equivalent standard kernel operations.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-12-17 12:16:46 -08:00
Dan Carpenter 89b6c8d1e4 Btrfs: tests: checking for NULL instead of IS_ERR()
btrfs_alloc_dummy_root() return an error pointer on failure, it never
returns NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:50 -08:00